Both libpq(3) and github.com/lib/pq both use `sslmode`. Prefer this vs
the non-standard `ssl_mode`. `ssl_mode` is supported for compatibility
but should be removed in the future.
Changelog: yes
Also don't specify the default and rely on github.com/lib/pq (which uses "required"
and is different than what libpq(3) uses, which is "preferred" and unsupported by
github.com/lib/pq).
* Allow import of aws_security_groups with more than one source_security_group_id rule
* Add acceptable test for security group with multiple source rules.
When importing an `aws_vpc_peering_connection`, the code assumes that
the account under Terraform control is the initiator (requester) of the
VPC peering request. This holds true when the peering connection is
between two VPCs in the same account, or when the peering connection has
been initiated from the controlled account to another.
However, when the peering connection has been initiated from a foreign
account towards the account under management, importing the peering
connection into the statefile results in values of `peer_vpc_id` and
`vpc_id` being the opposite way round to what they should be, and in the
`peer_owner_id` being set to the managed account's ID rather than the
foreign account's ID.
This patch checks the Accepter and Requester Owner IDs against the AWS
connection's reported owner ID, and reverses the mapping if it is
determined that the VPC peering connection is owned by the foreign
account.
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMVirtualMachine_plan -timeout 120m
=== RUN TestAccAzureRMVirtualMachine_plan
--- PASS: TestAccAzureRMVirtualMachine_plan (798.75s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 798.835s
This adds the new resource aws_snapshot_create_volume_permission which
manages the createVolumePermission attribute of snapshots. This allows
granting an AWS account permissions to create a volume from a particular
snapshot. This is often required to allow another account to copy a
private AMI.
The value is only multiplied by the API for topics in non-premium namespaces
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMServiceBusTopic_enablePartitioning -timeout 120m
=== RUN TestAccAzureRMServiceBusTopic_enablePartitioningStandard
--- PASS: TestAccAzureRMServiceBusTopic_enablePartitioningStandard (378.80s)
=== RUN TestAccAzureRMServiceBusTopic_enablePartitioningPremium
--- PASS: TestAccAzureRMServiceBusTopic_enablePartitioningPremium (655.00s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 1033.874s
AWS allows only the case-sensitive strings `Allow` and `Deny` to appear
in the `Effect` fields of IAM policy documents. Catch deviations from
this, including mis-casing, before hitting the API and generating an
error (the error is a generic 400 and doesn't indicate what part of the
policy doc is invalid).
* provider/datadog 9869: Validate credentials when initialising client.
* provider/datadog Pull in new version of go-datadog-api.
* provider/datadog Update testAccCheckDatadogMonitorConfigNoThresholds test config.
Fixes#8455, #5390
This add a new `no_device` attribute to `ephemeral_block_device` block,
which allows users omit ephemeral devices from AMI's predefined block
device mappings, which is useful for EBS-only instance types.
* provider/datadog #9375: Refactor tags to a list instead of a map.
Tags are allowed to be but not restricted to, key value pairs (ie: foo:bar)
but are esssentially strings. This changes allows using, and mixing of tags with
form "foo" and "foo:bar". It also allows using duplicate keys like "foo:bar" and "foo:baz".
* provider/datadog update import test.
This commit extracts the GPG code used for aws_iam_user_login_profile
into a library that can be reused for other resources, and updates the
call sites appropriately.
* provider/azurerm: Bump sdk version to 7.0.1
* Fixing the build (#10489)
* Fixing the broken tests (#10499)
* Updating the method signatures to match (#10533)
Fixes#10463
I'm really surprised this flew under the radar for years...
By having unique PRNGs, the SSH communicator could and would
generate identical ScriptPaths and two provisioners running in parallel
could overwrite each other and execute the same script. This would
happen because they're both seeded by the current time which could
potentially be identical if done in parallel...
Instead, we share the rand now so that the sequence is guaranteed
unique. As an extra measure of robustness, we also multiple by the PID
so that we're also protected against two processes at the same time.
* "external" provider for gluing in external logic
This provider will become a bit of glue to help people interface external
programs with Terraform without writing a full Terraform provider.
It will be nowhere near as capable as a first-class provider, but is
intended as a light-touch way to integrate some pre-existing or custom
system into Terraform.
* Unit test for the "resourceProvider" utility function
This small function determines the dependable name of a provider for
a given resource name and optional provider alias. It's simple but it's
a key part of how resource nodes get connected to provider nodes so
worth specifying the intended behavior in the form of a test.
* Allow a provider to export a resource with the provider's name
If a provider only implements one resource of each type (managed vs. data)
then it can be reasonable for the resource names to exactly match the
provider name, if the provider name is descriptive enough for the
purpose of the each resource to be obvious.
* provider/external: data source
A data source that executes a child process, expecting it to support a
particular gateway protocol, and exports its result. This can be used as
a straightforward way to retrieve data from sources that Terraform
doesn't natively support..
* website: documentation for the "external" provider
* add rds db for opsworks
* switched to stack in vpc
* implement update method
* add docs
* implement and document force new resource behavior
* implement retry for update and delete
* add test that forces new resource
This commit changes allowed_address_pairs from a TypeList to a TypeSet
allowing for arbitrary ordering. This solves the issue where a user
specifies an address pair one way and OpenStack returns a different
order.
* Update to latest version of go-datadog-api
* Updates to latest go-datadog-api version, which adds more complete
timeboard support.
* Add more complete timeboard support
* Adds in support for missing timeboard fields, so now we can have nice
things like conditional formats and more.
* Document new fields in datadog_timeboard resource
* Add acceptance test for datadog timeboard changes
* Add new aws_vpc_endpoint_route_table_association resource.
This commit adds a new resource which allows to a list of route tables to be
either added and/or removed from an existing VPC Endpoint. This resource would
also be complimentary to the existing `aws_vpc_endpoint` resource where the
route tables might not be specified (not a requirement for a VPC Endpoint to
be created successfully) during creation, especially where the workflow is
such where the route tables are not immediately known.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Additions by Kit Ewbank <Kit_Ewbank@hotmail.com>:
* Add functionality
* Add documentation
* Add acceptance tests
* Set VPC endpoint route_table_ids attribute to "Computed"
* Changes after review - Set resource ID in create function.
* Changes after code review by @kwilczynski:
* Removed error types and simplified the error handling in 'resourceAwsVPCEndpointRouteTableAssociationRead'
* Simplified logging in 'resourceAwsVPCEndpointRouteTableAssociationDelete'
Update our instance template to include metadata_startup_script, to
match our instance resource. Also, we've resolved the diff errors around
metadata.startup-script, and people want to use that to create startup
scripts that don't force a restart when they're changed, so let's stop
disallowing it.
Also, we had a bunch of calls to `schema.ResourceData.Set` that ignored
the errors, so I added error handling for those calls. It's mostly
bundled with this code because I couldn't be sure whether it was the
root of bugs or not, so I took care of it while addressing the startup
script issue.
* provider/openstack: Detect Region for Importing Resources
This commit changes the way the OpenStack region is detected and set.
Any time a region is required, the region attribute will first be
checked. Next, the OS_REGION_NAME environment variable will be checked.
While schema.EnvDefaultFunc handles this same situation, it is not
applicable when importing resources.
* provider/openstack: No longer ignore region in importing tests
* provider/openstack: Network and Subnet Import Fixes
This commit fixes the OpenStack Network and Subnet resources so that
importing of those resources is successful.
This change doesn't make much sense now, as projects are read-only
anyways, so there's not a lot that importing really does for you--you
can already reference pre-existing projects just by defining them in
your config.
But as we discussed #10425, this change made more and more sense. In a
world where projects can be created, we can no longer reference
pre-existing projects just by defining them in config. We get that
ability back by making projects importable.
* provider/aws: Add DeploymentRollback as a valid TriggerEvent type
* provider/aws: Add auto_rollback_configuration to aws_codedeploy_deployment_group
* provider/aws: Document auto_rollback_configuration
- part of aws_codedeploy_deployment_group
* provider/aws: Support removing and disabling auto_rollback_configuration
- part of aws_codedeploy_deployment_group resource
- when removing configuration, ensure events are removed
- when disabling configuration, preserve events in case configuration is re-enabled
* provider/aws: Add alarm_configuration to aws_codedeploy_deployment_group
* provider/aws: Document alarm_configuration
- part of aws_codedeploy_deployment_group
* provider/aws: Support removing alarm_configuration
- part of aws_codedeploy_deployment_group resource
- disabling configuration doesn't appear to work...
* provider/aws: Refactor auto_rollback_configuration tests
- Add create test
- SKIP failing test for now
- Add tests for build & map functions
* provider/aws: Refactor new aws_code_deploy_deployment_group tests
- alarm_configuration and auto_rollback_configuration only
- add assertions to deployment_group basic test
- rename config funcs to be more easy to read
- group public tests together
* provider/aws: A max of 10 alarms can be added to a deployment group.
- aws_code_deploy_deployment_group.alarm_configuration.alarms
- verified this causes test failure with expected exception
* provider/aws: Test disabling alarm_configuration and auto_rollback_configuration
- the tests now pass after rebasing the latest master branch
Google's Backend Services gives users control over the session affinity modes.
Let's allow Terraform users to leverage this option.
We don't change the default value ("NONE", as provided by Google).
* provider/azurerm: support import of route
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMRoute_import -timeout 120m
=== RUN TestAccAzureRMRoute_importBasic
--- PASS: TestAccAzureRMRoute_importBasic (166.99s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 167.066s
* provider/azurerm: fix route_table not setting routes
The resource wasn't actually setting the routes in the create/update method,
this went unnoticed as it also didn't read the routes array back to state.
Fixes#10316
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMRouteTable -timeout 120m
=== RUN TestAccAzureRMRouteTable_basic
--- PASS: TestAccAzureRMRouteTable_basic (122.96s)
=== RUN TestAccAzureRMRouteTable_disappears
--- PASS: TestAccAzureRMRouteTable_disappears (121.12s)
=== RUN TestAccAzureRMRouteTable_withTags
--- PASS: TestAccAzureRMRouteTable_withTags (136.01s)
=== RUN TestAccAzureRMRouteTable_multipleRoutes
--- PASS: TestAccAzureRMRouteTable_multipleRoutes (155.44s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 535.612s
* provider/azurerm: support import of route_table
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMRouteTable_import -timeout 120m
=== RUN TestAccAzureRMRouteTable_importBasic
--- PASS: TestAccAzureRMRouteTable_importBasic (121.90s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 121.978s
* provider/aws: Generate name for TestAccElasticBeanstalkApplicationImport
This allows tests to run concurrently.
* provider/aws: Generate names for TestAWSElasticBeanstalkEnvironment_importBasic
This allows tests to run concurrently.
* provider/azurerm: support import of virtual_machine
TF_ACC=1 go test ./builtin/providers/azurerm -v -run "TestAccAzureRMVirtualMachine_(basic|import)" -timeout 120m
=== RUN TestAccAzureRMVirtualMachine_importBasic
--- PASS: TestAccAzureRMVirtualMachine_importBasic (561.08s)
=== RUN TestAccAzureRMVirtualMachine_basicLinuxMachine
--- PASS: TestAccAzureRMVirtualMachine_basicLinuxMachine (677.49s)
=== RUN TestAccAzureRMVirtualMachine_basicLinuxMachine_disappears
--- PASS: TestAccAzureRMVirtualMachine_basicLinuxMachine_disappears (674.21s)
=== RUN TestAccAzureRMVirtualMachine_basicWindowsMachine
--- PASS: TestAccAzureRMVirtualMachine_basicWindowsMachine (1105.18s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 3017.970s
* provider/azurerm: support import of servicebus_namespace
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMServiceBusNamespace_import -timeout 120m
=== RUN TestAccAzureRMServiceBusNamespace_importBasic
--- PASS: TestAccAzureRMServiceBusNamespace_importBasic (345.80s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 345.879s
* provider/azurerm: document import of servicebus_topic and servicebus_subscription
* provider/azurerm: support import of dns record resources
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMDns[A-z]+Record_importBasic -timeout 120m
=== RUN TestAccAzureRMDnsARecord_importBasic
--- PASS: TestAccAzureRMDnsARecord_importBasic (102.84s)
=== RUN TestAccAzureRMDnsAAAARecord_importBasic
--- PASS: TestAccAzureRMDnsAAAARecord_importBasic (100.59s)
=== RUN TestAccAzureRMDnsCNameRecord_importBasic
--- PASS: TestAccAzureRMDnsCNameRecord_importBasic (98.94s)
=== RUN TestAccAzureRMDnsMxRecord_importBasic
--- PASS: TestAccAzureRMDnsMxRecord_importBasic (107.30s)
=== RUN TestAccAzureRMDnsNsRecord_importBasic
--- PASS: TestAccAzureRMDnsNsRecord_importBasic (98.55s)
=== RUN TestAccAzureRMDnsSrvRecord_importBasic
--- PASS: TestAccAzureRMDnsSrvRecord_importBasic (100.19s)
=== RUN TestAccAzureRMDnsTxtRecord_importBasic
--- PASS: TestAccAzureRMDnsTxtRecord_importBasic (97.49s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 706.000s
* provider/azurerm: support import of cdn_endpoint, document profile import
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMCdnEndpoint_import -timeout 120m
=== RUN TestAccAzureRMCdnEndpoint_importWithTags
--- PASS: TestAccAzureRMCdnEndpoint_importWithTags (207.83s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 207.907s
* provider/azurerm: support import of sql_server, fix sql_firewall import
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMSql[A-z]+_importBasic -timeout 120m
=== RUN TestAccAzureRMSqlFirewallRule_importBasic
--- PASS: TestAccAzureRMSqlFirewallRule_importBasic (153.72s)
=== RUN TestAccAzureRMSqlServer_importBasic
--- PASS: TestAccAzureRMSqlServer_importBasic (119.83s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 273.630s
Although the aws_iam_policy has a problem of normalization (refs #8350),
I think it would be useful simply to add JSON syntax validation.
I wasted a lot of time with JSON syntax errors.
Validate the aws_iam_policy using the validateJsonString helper.
This commit adds the ability to authenticate with Swauth/Swift. This can
be used in Swift-only environments that do not have a Keystone service
for authentication.
* provider/aws: Add ability to create aws_ebs_snapshot
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEBSSnapshot_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/10 14:18:36 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSEBSSnapshot_
-timeout 120m
=== RUN TestAccAWSEBSSnapshot_basic
--- PASS: TestAccAWSEBSSnapshot_basic (31.56s)
=== RUN TestAccAWSEBSSnapshot_withDescription
--- PASS: TestAccAWSEBSSnapshot_withDescription (189.35s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws220.928s
```
* docs/aws: Addition of the docs for aws_ebs_snapshot resource
* provider/aws: Creation of shared schema funcs for common AWS data source
patterns
* provider/aws: Create aws_ebs_snapshot datasource
Fixes#8828
This data source will use a number of filters, owner_ids, snapshot_ids
and restorable_by_user_ids in order to find the correct snapshot. The
data source has no real use case for most_recent and will error on no
snapshots found or greater than 1 snapshot found
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEbsSnapshotDataSource_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/10 14:34:33 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSEbsSnapshotDataSource_ -timeout 120m
=== RUN TestAccAWSEbsSnapshotDataSource_basic
--- PASS: TestAccAWSEbsSnapshotDataSource_basic (192.66s)
=== RUN TestAccAWSEbsSnapshotDataSource_multipleFilters
--- PASS: TestAccAWSEbsSnapshotDataSource_multipleFilters (33.84s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws226.522s
```
* docs/aws: Addition of docs for the aws_ebs_snapshot data source
Adds the new resource `aws_ebs_snapshot`
This update adds ALB support to the
wait_for_elb_capacity/min_elb_capacity options. Target groups are
handled in nearly the same way as Classic ELBs, so the change should be
transparent. This supports both ALB target groups and classic ELBs being
attached to the ASG at the same time.
* provider/aws: Add aws_alb data source
This adds the aws_alb data source for getting information on an AWS
Application Load Balancer.
The schema is nearly the same as the resource of the same name, with
most of the resource population logic de-coupled into its own function
so that they can be shared between the resource and data source.
* provider/aws: aws_alb data source language revisions
* Multiple/zero result error slightly updated to be a bit more
specific.
* Fixed relic of the copy of the resource docs (resource -> data
source)
When `force_destroy` was specifed on an `aws_iam_user` resource, only IAM
access keys and the login profile were destroyed. If a multi-factor auth
device had been activated for that user, deletion would fail as follows:
```
* aws_iam_user.testuser1: Error deleting IAM User testuser1: DeleteConflict: Cannot delete entity, must delete MFA device first.
status code: 409, request id: aa41b1b7-ac4d-11e6-bb3f-3b4c7a310c65
```
This commit iterates over any of the user's MFA devices and deactivates
them before deleting the user. It follows a pattern similar to that used
to remove users' IAM access keys before deletion.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSUser_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/20 17:09:00 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSUser_ -timeout 120m
=== RUN TestAccAWSUser_importBasic
--- PASS: TestAccAWSUser_importBasic (5.70s)
=== RUN TestAccAWSUser_basic
--- PASS: TestAccAWSUser_basic (11.12s)
PASS
ok github.com/rhenning/terraform/builtin/providers/aws 20.840s
```
This commit adds the openstack_compute_volume_attach_v2 resource. This
resource enables a volume to be attached to an instance by using the
OpenStack Compute (Nova) v2 volumeattach API.
This commit adds the openstack_blockstorage_volume_attach_v2 resource. This
resource enables a volume to be attached to an instance by using the OpenStack
Block Storage (Cinder) v2 API.
Fixes a case where ResourceConfig.get inadvertently returns a nil value.
Add an integration test where assigning a map to a list via
interpolation would panic.
* provider/github: add GitHub labels resource
Provides a GitHub issue label resource.
This resource allows easy management of issue labels for an
organisation's repositories. A name, and a color can be set.
These attributes can be updated without creating a new resource.
* provider/github: add documentation for GitHub issue labels resource
* provider/aws: Add aws_alb_listener data source
This adds the aws_alb_listener data source to get information on an AWS
Application Load Balancer listener.
The schema is slightly modified (only option-wise, attributes are the
same) and we use the aws_alb_listener resource read function to get the
data.
Note that the HTTPS test here may fail due until
hashicorp/terraform#10180 is merged.
* provider/aws: Add aws_alb_listener data source docs
Now documented.
When using the static NAT resource, you no longer have to specify a `network_id`. This can be inferred from the choosen `virtual_machine_id` and/or the `vm_guest_ip`.
* provider/scaleway: increase wait for server time
according to the scaleway community, shutdown/ startup might actually take an
hour. since a regular shutdown transfers data this is bound by the size of the
actual volumes in use.
https://community.online.net/t/solving-the-long-shutdown-boot-when-only-needed-to-attach-detach-a-volume/326
anyhow, 20 minutes seems quite optimistic, and we've seen some timeout errors in
the logs, too
* provider/scaleway: clear cache on volume attachment
the volume attachment errors quite often, and while I have no hard evidence
(yet) I guess it might be related to the cache that the official scaleway SDK
includes.
for now this is just a tiny experiment, clearing the cache when creating/
destroying volume attachments. let's see if this improves anything, really
* provider/scaleway: guard against attaching already attached volumes
* provider/scaleway: use cheaper instance types for tests
Scaleway bills by the hour and C2S costs much more than C1, since in the tests
we just spin up instances, to destroy them later on...
Looks like sometimes it takes some time for IAM certificates to
propagate, which can cause errors on ALB listener creation.
Possibly same thing as hashicorp/terraform#5178, but for ALB
now instead of ELB.
This was discovered via acceptance tests, specifically the
TestAccAWSALBListener_https test. Updated the creation process to wait
on CertificateNotFound for a max of 5min.
- Per our discussion around the PR to increase this initially, we
weren't sure if 1 minute would be sufficient. Well, it turns out it
wasn't for me today (we don't delete these often so not sure how
often people run into this).
Picking another somewhat arbitrary value of 5 minutes in the hopes
that it will be sufficient (today it took a little over 2 minutes).
Since the Lambda CreateFunction call may include an up to 50MB payload,
the request can easily take more than a minute. This increases the
timeout to 10 minutes.
Fixes#10042Fixes#9989
Another panic was found with this resource. IT essentially was causing a
panic when no certificates were found. This was due to the casting of
status to []string
There are times when there are no statuses passed in. Made the error
message a lot more generic now rather than having something like this
```
No certificate with statuses [] for domain mytestdomain.com found in this region.
```
This now becomes:
```
No certificate for domain mytestdomain.com found in this region.
```
Also, added a test to show that the panic is gone
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAwsAcmCertificateDataSource_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/11 15:11:33 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAwsAcmCertificateDataSource_ -timeout 120m
=== RUN TestAccAwsAcmCertificateDataSource_noMatchReturnsError
--- PASS: TestAccAwsAcmCertificateDataSource_noMatchReturnsError (6.07s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws6.094s
```
* provider/azurerm: allow updating of lb_rule resource
* check if rule is being updated rather than assuming created
* added test to cover guard against multiple rules with the same name
TF_ACC=1 go test ./builtin/providers/azurerm -v -run "TestAccAzureRMLoadBalancerRule_" -timeout 120m
=== RUN TestAccAzureRMLoadBalancerRule_basic
--- PASS: TestAccAzureRMLoadBalancerRule_basic (157.45s)
=== RUN TestAccAzureRMLoadBalancerRule_removal
--- PASS: TestAccAzureRMLoadBalancerRule_removal (163.67s)
=== RUN TestAccAzureRMLoadBalancerRule_inconsistentReads
--- PASS: TestAccAzureRMLoadBalancerRule_inconsistentReads (150.00s)
=== RUN TestAccAzureRMLoadBalancerRule_update
--- PASS: TestAccAzureRMLoadBalancerRule_update (164.20s)
=== RUN TestAccAzureRMLoadBalancerRule_duplicateRules
--- PASS: TestAccAzureRMLoadBalancerRule_duplicateRules (137.51s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 772.846s
* provider/azurerm: allow updating of lb_nat_rule resource
* check if NAT rule is being updated rather than assuming created
* added test to cover guard against multiple NAT rules with the same name
TF_ACC=1 go test ./builtin/providers/azurerm -v -run "TestAccAzureRMLoadBalancerNatRule" -timeout 120m
=== RUN TestAccAzureRMLoadBalancerNatRule_basic
--- PASS: TestAccAzureRMLoadBalancerNatRule_basic (148.48s)
=== RUN TestAccAzureRMLoadBalancerNatRule_removal
--- PASS: TestAccAzureRMLoadBalancerNatRule_removal (163.48s)
=== RUN TestAccAzureRMLoadBalancerNatRule_update
--- PASS: TestAccAzureRMLoadBalancerNatRule_update (176.97s)
=== RUN TestAccAzureRMLoadBalancerNatRule_duplicate
--- PASS: TestAccAzureRMLoadBalancerNatRule_duplicate (136.36s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 625.301s
* provider/azurerm: allow updating of lb_probe resource
* check if probe is being updated rather than assuming created
* added test to cover guard against multiple probes with the same name
TF_ACC=1 go test ./builtin/providers/azurerm -v -run "TestAccAzureRMLoadBalancerProbe" -timeout 120m
=== RUN TestAccAzureRMLoadBalancerProbe_basic
--- PASS: TestAccAzureRMLoadBalancerProbe_basic (134.53s)
=== RUN TestAccAzureRMLoadBalancerProbe_removal
--- PASS: TestAccAzureRMLoadBalancerProbe_removal (168.06s)
=== RUN TestAccAzureRMLoadBalancerProbe_update
--- PASS: TestAccAzureRMLoadBalancerProbe_update (175.99s)
=== RUN TestAccAzureRMLoadBalancerProbe_duplicate
--- PASS: TestAccAzureRMLoadBalancerProbe_duplicate (139.01s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 617.598s
* provider/azurerm: allow updating of lb_nat_pool resource
* check if NAT pool is being updated rather than assuming created
* added test to cover guard against multiple NAT pools with the same name
TF_ACC=1 go test ./builtin/providers/azurerm -v -run "TestAccAzureRMLoadBalancerNatPool" -timeout 120m
=== RUN TestAccAzureRMLoadBalancerNatPool_basic
--- PASS: TestAccAzureRMLoadBalancerNatPool_basic (146.52s)
=== RUN TestAccAzureRMLoadBalancerNatPool_removal
--- PASS: TestAccAzureRMLoadBalancerNatPool_removal (158.34s)
=== RUN TestAccAzureRMLoadBalancerNatPool_update
--- PASS: TestAccAzureRMLoadBalancerNatPool_update (174.05s)
=== RUN TestAccAzureRMLoadBalancerNatPool_duplicate
--- PASS: TestAccAzureRMLoadBalancerNatPool_duplicate (136.94s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 615.866s
* allow underscore in database_name [redshift]
Fixes#10009
* Added Test Cases To Validate Redshift DBName
* Remove Old Test Cases Regarding Redshift DBName Validation
* Added More Test Cases For Redshift DBName
Also added a test to prove that the computed value gets set
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBInstance_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/10 06:26:22 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSDBInstance_basic -timeout 120m
=== RUN TestAccAWSDBInstance_basic
--- PASS: TestAccAWSDBInstance_basic (634.33s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws634.347s
```
Fixes#9989
When passing a list of statuses to the acm_certificate data source, we
were trying to cast a schema.TypeList directly to []string
We need to do it via an []interface{} and then cast to string when
ranging over the results. Without this, we get a panic
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMDnsARecord_basic -timeout 120m
=== RUN TestAccAzureRMDnsARecord_basic
--- PASS: TestAccAzureRMDnsARecord_basic (91.92s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 91.994s
* Added key_name_prefix to aws_key_pair resource schema.
* Added logic to prefix the aws_key_pair name on create.
* Added aws_key_pair test config for key_name_prefix case.
* Copied test cases from testAccAWSSecurityGroup namespace.
* Modified copied test case to suit aws_key_pair resource.
* Changed required flag to optional on key_name argument for aws_key_pair resource.
* Added documentation for key_name_prefix argument.
* Code style fix.
* Fixed undefined variable error in test.
Picked up from where #6548 left off
settings and protected_settings take JSON objects as strings to make extension
generic
TF_ACC=1 go test ./builtin/providers/azurerm -v -run "TestAccAzureRMVirtualMachineExtension" -timeout 120m
=== RUN TestAccAzureRMVirtualMachineExtension_importBasic
--- PASS: TestAccAzureRMVirtualMachineExtension_importBasic (697.55s)
=== RUN TestAccAzureRMVirtualMachineExtension_basic
--- PASS: TestAccAzureRMVirtualMachineExtension_basic (824.17s)
=== RUN TestAccAzureRMVirtualMachineExtension_concurrent
--- PASS: TestAccAzureRMVirtualMachineExtension_concurrent (929.74s)
=== RUN TestAccAzureRMVirtualMachineExtension_linuxDiagnostics
--- PASS: TestAccAzureRMVirtualMachineExtension_linuxDiagnostics (803.19s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 3254.663s
this PR fixes a flakyness in the `scaleway_volume_attachment` resource, as
described below:
when attaching/ detaching a volume from a `scaleway_server`, the server needs to
be stopped. even though the code already waits for the server to be stopped, the
`PatchServer` calls gets a `400 server is being stopped or rebooted` error
response.
If the API returns the `400` we bail, leaving terraform in a broken state.
Assuming this is the only error that the API might return to us, as the payload
itself is correct, this retry behaviour should fix the issue.
\cc @stack72 PTAL
When configuring an instance's attached disk, if the attached disk has
both the disk and type attributes set, it would previously cause
terraform to crash with a nil pointer exception. The root cause was that
we only instantiate the InitializeParams property of the disk if its
disk attribute isn't set, and we try to write to the InitializeParams
property when the type attribute is set. So setting both caused the
InitializeParams property to not be initialized, then written to.
Now we throw an error explaining that the configuration can't have both
the disk and the type set.
Fixes#6495.
Fixes#9895
The replication_group_id should allow length to be max of 20 not 16
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestResourceAWSElastiCacheReplicationGroupIdValidation'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/07 16:17:52 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestResourceAWSElastiCacheReplicationGroupIdValidation -timeout
120m
=== RUN TestResourceAWSElastiCacheReplicationGroupIdValidation
--- PASS: TestResourceAWSElastiCacheReplicationGroupIdValidation (0.00s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws0.032s
```
The work to add the arn_suffix in #9734 skipped adding the targetgroup/
part of the arn
This PR adds it
//cc @firthh
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALBTargetGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/07 12:19:16 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALBTargetGroup_ -timeout 120m
=== RUN TestAccAWSALBTargetGroup_basic
--- PASS: TestAccAWSALBTargetGroup_basic (47.23s)
=== RUN TestAccAWSALBTargetGroup_changeNameForceNew
--- PASS: TestAccAWSALBTargetGroup_changeNameForceNew (80.09s)
=== RUN TestAccAWSALBTargetGroup_changeProtocolForceNew
--- PASS: TestAccAWSALBTargetGroup_changeProtocolForceNew (87.45s)
=== RUN TestAccAWSALBTargetGroup_changePortForceNew
--- PASS: TestAccAWSALBTargetGroup_changePortForceNew (78.47s)
=== RUN TestAccAWSALBTargetGroup_changeVpcForceNew
--- PASS: TestAccAWSALBTargetGroup_changeVpcForceNew (73.53s)
=== RUN TestAccAWSALBTargetGroup_tags
--- PASS: TestAccAWSALBTargetGroup_tags (75.60s)
=== RUN TestAccAWSALBTargetGroup_updateHealthCheck
--- PASS: TestAccAWSALBTargetGroup_updateHealthCheck (76.40s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 518.777s
```
fixes#9110
An error was found where, static_routes_only was not set on a vpn
connection import. This commit introduces setting the static_routes_only
to false when no Options are found. This follows the AWS convention as follows:
```
- options (structure)
Indicates whether the VPN connection requires static routes. If you are creating a VPN connection for a device that does not support BGP, you must specify true .
Default: false
```
So we take it that `static_options_only` is false by default
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSVpnConnection_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/02 10:38:18 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSVpnConnection_ -timeout 120m
=== RUN TestAccAWSVpnConnection_importBasic
--- PASS: TestAccAWSVpnConnection_importBasic (178.29s)
=== RUN TestAccAWSVpnConnection_basic
--- PASS: TestAccAWSVpnConnection_basic (336.81s)
=== RUN TestAccAWSVpnConnection_withoutStaticRoutes
--- PASS: TestAccAWSVpnConnection_withoutStaticRoutes (195.45s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 710.572s
```
* Implemented EventHubs
* Missing the sidebar link
* Fixing the type
* Fixing the docs for Namespace
* Removing premium tests
* Checking the correct status code on delete
* Added a test case for the import
* Documentation for importing
* Fixing a typo
We now generate the read operation which sets the various encodings of
the random value such that adding new ones does not require generating a
new random value.
We also verify that these are set correctly via the acceptance tests.
This commit makes three related changes to the `random_id` resource:
1. Deprecate the `b64` attribute
2. Introduce a new `b64_url` attribute which functions in the same
manner as the original `b64` attribute
3. Introduce a new `b64_std` attribute which uses standard base64
encoding for the value rather than URL encoding.
Resource identifiers continue to use URL encoded base 64.
The reason for adding standard encoding of the base 64 value is to allow
the use of generated values as a Serf Encryption Key for separating
Consul clusters - these rely on standard encoding and do not permit some
characters which are allowed by URL encoding. `b64_url` is introduced
in order that there is consistency in specifying the desired encoding
during interpolation.
This dep was meant as a stopgap for a patch in the stdlib of Go which I
wrote.
The patch was released in Go 1.7. We can now remove my fork and go back
to the stdlib
Use this data source to get the ARN of a certificate in AWS Certificate
Manager (ACM). The process of requesting and verifying a certificate in ACM
requires some manual steps, which means that Terraform cannot automate the
creation of ACM certificates. But using this data source, you can reference
them by domain without having to hard code the ARNs as input.
The acceptance test included requires an ACM certificate be pre-created
in and information about it passed in via environment variables. It's a
bit sad but there's really no other way to do it.
When computing the set key for an EBS block device, we were using
the wrong function; we had hashEphemeralBlockDevice instead of
hashEbsBlockDevice. This caused a panic by trying to access the
virtual_name attribute that will never be set for EBS block
devices.
To fix this, I switched to the hashEbsBlockDevice function, which
is already being used to compute a Set key in the Schema. But in
the default case, where the snapshot_id attribute isn't specified,
this also caused a panic. I updated the way the string to hash is
generated to check for the existence of the device_name and
snapshot_id attributes before we use them, to avoid panics when
these optional attributes aren't set.
Spot fleet requests can have EBS volumes attached to them, and at
the moment we're getting reports that crashes can be experienced
with them. This adds an acceptance test that exercises creating
a Spot Fleet request that has a non-instance EBS volume attached.
This successfully reproduces the panic.
* GH-8755 - Adding in support to attach ASG to ELB as independent action
* GH-8755 - Adding in docs
* GH-8755 - Adjusting attribute name and responding to other PR feedback
In #8502 it was requested that we add support for the EnableSNI
parameter of Route53's health checks; this enables customers to
manually specify whether or not the health check will use SNI when
communicating with the endpoint.
The customer originally requested we default to `false`. While
implementing the issue, I discovered that when creating health
checks with a Type set to HTTP, Amazon's default value for EnableSNI
is `false`. However, when creating health checks with a Type set to
HTTPS, Amazon's default value is `true`. So rather than setting a
default value, I made the attribute computed.
Fixes#9658Fixes#8728
Originally, this would ForceNew as follows:
```
-/+ aws_alb.alb_test
arn: "arn:aws:elasticloadbalancing:us-west-2:187416307283:loadbalancer/app/test-alb-9658/3459cd2446b76901" => "<computed>"
arn_suffix: "app/test-alb-9658/3459cd2446b76901" => "<computed>"
dns_name: "test-alb-9658-1463108301.us-west-2.elb.amazonaws.com" => "<computed>"
enable_deletion_protection: "false" => "false"
idle_timeout: "30" => "30"
internal: "false" => "false"
name: "test-alb-9658" => "test-alb-9658"
security_groups.#: "2" => "1" (forces new resource)
security_groups.1631253634: "sg-3256274b" => "" (forces new resource)
security_groups.3505955000: "sg-1e572667" => "sg-1e572667" (forces new resource)
subnets.#: "2" => "2"
subnets.2407170741: "subnet-ee536498" => "subnet-ee536498"
subnets.2414619308: "subnet-f1a7b595" => "subnet-f1a7b595"
tags.%: "1" => "1"
tags.TestName: "TestAccAWSALB_basic" => "TestAccAWSALB_basic"
vpc_id: "vpc-dd0ff9ba" => "<computed>"
zone_id: "Z1H1FL5HABSF5" => "<computed>"
Plan: 1 to add, 0 to change, 1 to destroy.
```
When the ALB was ForceNew, the ARN changed. The test has been updated to include a check to make sure that the ARNs are the same after the update
After this change, it looks as follows:
```
~ aws_alb.alb_test
security_groups.#: "1" => "2"
security_groups.1631253634: "" => "sg-3256274b"
security_groups.3505955000: "sg-1e572667" => "sg-1e572667"
Plan: 0 to add, 1 to change, 0 to destroy.
```
Test Results:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALB_' ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/02 12:20:58 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALB_ -timeout 120m
=== RUN TestAccAWSALB_basic
--- PASS: TestAccAWSALB_basic (64.25s)
=== RUN TestAccAWSALB_generatedName
--- PASS: TestAccAWSALB_generatedName (65.04s)
=== RUN TestAccAWSALB_namePrefix
--- PASS: TestAccAWSALB_namePrefix (67.02s)
=== RUN TestAccAWSALB_tags
--- PASS: TestAccAWSALB_tags (96.06s)
=== RUN TestAccAWSALB_updatedSecurityGroups
--- PASS: TestAccAWSALB_updatedSecurityGroups (101.61s)
=== RUN TestAccAWSALB_noSecurityGroup
--- PASS: TestAccAWSALB_noSecurityGroup (59.83s)
=== RUN TestAccAWSALB_accesslogs
--- PASS: TestAccAWSALB_accesslogs (162.65s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 616.489s
```
* provider/aws: Provide the option to skip_destroy on
aws_volume_attachment
When you want to attach and detach pre-existing EBS volumes to an
instance, we would do that as follows:
```
resource "aws_instance" "web" {
ami = "ami-21f78e11"
availability_zone = "us-west-2a"
instance_type = "t1.micro"
tags {
Name = "HelloWorld"
}
}
data "aws_ebs_volume" "ebs_volume" {
filter {
name = "size"
values = ["${aws_ebs_volume.example.size}"]
}
filter {
name = "availability-zone"
values = ["${aws_ebs_volume.example.availability_zone}"]
}
filter {
name = "tag:Name"
values = ["TestVolume"]
}
}
resource "aws_volume_attachment" "ebs_att" {
device_name = "/dev/sdh"
volume_id = "${data.aws_ebs_volume.ebs_volume.id}"
instance_id = "${aws_instance.web.id}"
skip_destroy = true
}
```
The issue here is that when we run a terraform destroy command, the volume tries to get detached from a running instance and goes into a non-responsive state. We would have to force_destroy the volume at that point and risk losing any data on it.
This PR introduces the idea of `skip_destroy` on a volume attachment. tl;dr:
We want the volume to be detached from the instane when the instance itself has been destroyed. This way the normal shut procedures will happen and protect the disk for attachment to another instance
Volume Attachment Tests:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSVolumeAttachment_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/02 00:47:27 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSVolumeAttachment_ -timeout 120m
=== RUN TestAccAWSVolumeAttachment_basic
--- PASS: TestAccAWSVolumeAttachment_basic (133.49s)
=== RUN TestAccAWSVolumeAttachment_skipDestroy
--- PASS: TestAccAWSVolumeAttachment_skipDestroy (119.64s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 253.158s
```
EBS Volume Tests:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEBSVolume_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/02 01:00:18 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSEBSVolume_ -timeout 120m
=== RUN TestAccAWSEBSVolume_importBasic
--- PASS: TestAccAWSEBSVolume_importBasic (26.38s)
=== RUN TestAccAWSEBSVolume_basic
--- PASS: TestAccAWSEBSVolume_basic (26.86s)
=== RUN TestAccAWSEBSVolume_NoIops
--- PASS: TestAccAWSEBSVolume_NoIops (27.89s)
=== RUN TestAccAWSEBSVolume_withTags
--- PASS: TestAccAWSEBSVolume_withTags (26.88s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 108.032s
```
* Update volume_attachment.html.markdown
There are three equivalent forms for expressing "everyone" (including
anonymous) in IAM policies:
- "Principals": "*"
- "Principals": {"AWS": "*"}
- "Principals": {"*": "*"}
The more-constrained syntax used by our aws_iam_policy_document data
source means that the user can only express the latter two of these
directly. However, when returning IAM policies from the API AWS likes to
normalize to the first form, causing unresolvable diffs.
This fixes#9335 by handling the "everyone" case as a special case,
serializing it in JSON as the "*" shorthand form.
This change does *not* address the normalization of hand-written policies
containing such elements. A similar change would need to be made in
the external package github.com/jen20/awspolicyequivalence in order to
avoid the issue for hand-written policies.
This will allows us to filter a specific ebs_volume for attachment to an
aws_instance
```
make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEbsVolumeDataSource_'✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/11/01 12:39:19 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSEbsVolumeDataSource_ -timeout 120m
=== RUN TestAccAWSEbsVolumeDataSource_basic
--- PASS: TestAccAWSEbsVolumeDataSource_basic (28.74s)
=== RUN TestAccAWSEbsVolumeDataSource_multipleFilters
--- PASS: TestAccAWSEbsVolumeDataSource_multipleFilters (28.37s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws57.145s
```
tags were not being set in the read function
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMSqlDatabase_basic -timeout 120m
=== RUN TestAccAzureRMSqlDatabase_basic
--- PASS: TestAccAzureRMSqlDatabase_basic (190.60s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 190.719s
* Allow `active` state while waiting for the VPC Peering Connection.
This commit adds `active` as one of the valid states in which the VPC Peering
Connection can be when it being created.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add more valid states.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Fixes#9628Fixes#9298
When a route53_record alias is updated in the console, AWS prepends
`dualstack.` to the name. This is there incase IPV6 is wanted. It is
exactly the same without it as it is with it
In order to stop perpetual diffs, I introduced a normalizeFunc that will
that tke alias name and strip known issues:
* dualstack
* trailing dot
This normalize fun will continue to grow I'm sure
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRoute53Record_' ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/29 00:28:12 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRoute53Record_ -timeout 120m
=== RUN TestAccAWSRoute53Record_basic
--- PASS: TestAccAWSRoute53Record_basic (124.64s)
=== RUN TestAccAWSRoute53Record_basic_fqdn
--- PASS: TestAccAWSRoute53Record_basic_fqdn (132.07s)
=== RUN TestAccAWSRoute53Record_txtSupport
--- PASS: TestAccAWSRoute53Record_txtSupport (134.07s)
=== RUN TestAccAWSRoute53Record_spfSupport
--- PASS: TestAccAWSRoute53Record_spfSupport (113.36s)
=== RUN TestAccAWSRoute53Record_generatesSuffix
--- PASS: TestAccAWSRoute53Record_generatesSuffix (112.62s)
=== RUN TestAccAWSRoute53Record_wildcard
--- PASS: TestAccAWSRoute53Record_wildcard (162.84s)
=== RUN TestAccAWSRoute53Record_failover
--- PASS: TestAccAWSRoute53Record_failover (126.18s)
=== RUN TestAccAWSRoute53Record_weighted_basic
--- PASS: TestAccAWSRoute53Record_weighted_basic (121.10s)
=== RUN TestAccAWSRoute53Record_alias
--- PASS: TestAccAWSRoute53Record_alias (118.14s)
=== RUN TestAccAWSRoute53Record_s3_alias
--- PASS: TestAccAWSRoute53Record_s3_alias (155.07s)
=== RUN TestAccAWSRoute53Record_weighted_alias
--- PASS: TestAccAWSRoute53Record_weighted_alias (235.41s)
=== RUN TestAccAWSRoute53Record_geolocation_basic
^[[C--- PASS: TestAccAWSRoute53Record_geolocation_basic (125.32s)
=== RUN TestAccAWSRoute53Record_latency_basic
--- PASS: TestAccAWSRoute53Record_latency_basic (122.23s)
=== RUN TestAccAWSRoute53Record_TypeChange
--- PASS: TestAccAWSRoute53Record_TypeChange (231.98s)
=== RUN TestAccAWSRoute53Record_empty
--- PASS: TestAccAWSRoute53Record_empty (116.48s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 2131.526s
```
Before this fix, I was getting the following by recreating the code in
```
~ aws_route53_record.alias
alias.1563903989.evaluate_target_health: "true" => "false"
alias.1563903989.name: "9828-recreation-106795730.us-west-2.elb.amazonaws.com." => ""
alias.1563903989.zone_id: "Z1H1FL5HABSF5" => ""
alias.318754017.evaluate_target_health: "" => "true"
alias.318754017.name: "" => "9828-recreation-106795730.us-west-2.elb.amazonaws.com"
alias.318754017.zone_id: "" => "Z1H1FL5HABSF5"
Plan: 0 to add, 1 to change, 0 to destroy.
```
After this fix:
```
No changes. Infrastructure is up-to-date. This means that Terraform
could not detect any differences between your configuration and
the real physical resources that exist. As a result, Terraform
doesn't need to do anything.
When creating a CloudWatch Metric for an Application Load Balancer Target Group it is
neccessary to use the suffix of the ARN as the reference to the load
balancer TG . This commit exposes that as an attribute on the `aws_alb_target_group`
resource to prevent the need to use regular expression substitution to
make the reference.
Fixes#9410
When importing an azurerm_virtual_network that has no DNSServers,
terraform was throwing a panic as it was trying to dereference that list
of servers to set to state
This commit adds a simple check to make sure there are DNSServers before
dereferencing them
```
make testacc TEST=./builtin/providers/azurerm TESTARGS='-run=TestAccAzureRMVirtualNetwork_' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/31 11:20:36 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/azurerm -v
-run=TestAccAzureRMVirtualNetwork_ -timeout 120m
=== RUN TestAccAzureRMVirtualNetwork_importBasic
--- PASS: TestAccAzureRMVirtualNetwork_importBasic (150.63s)
=== RUN TestAccAzureRMVirtualNetwork_basic
--- PASS: TestAccAzureRMVirtualNetwork_basic (122.90s)
=== RUN TestAccAzureRMVirtualNetwork_disappears
--- PASS: TestAccAzureRMVirtualNetwork_disappears (113.07s)
=== RUN TestAccAzureRMVirtualNetwork_withTags
--- PASS: TestAccAzureRMVirtualNetwork_withTags (139.56s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm526.168
```
Fixes#8679
The CallerReference attribute we passed to AWS in route53_health_checks
was `time.Now().Format(time.RFC3339Nano)`
When creating multiple resources with the Count meta-parameter, this was
causing issues as follows:
```
* aws_route53_health_check.healthstate.0: HealthCheckAlreadyExists: A different health check has already been created with the specified caller reference.
```
We have now exposed a new attribute called `reference_name` that can be set to pass multiple resources to the request
```
make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRoute53HealthCheck_' 130 ↵ ✹
==> Cecking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/31 10:41:07 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRoute53HealthCheck_ -timeout 120m
=== RUN TestAccAWSRoute53HealthCheck_importBasic
--- PASS: TestAccAWSRoute53HealthCheck_importBasic (17.08s)
=== RUN TestAccAWSRoute53HealthCheck_basic
--- PASS: TestAccAWSRoute53HealthCheck_basic (28.17s)
=== RUN TestAccAWSRoute53HealthCheck_withSearchString
--- PASS: TestAccAWSRoute53HealthCheck_withSearchString (28.07s)
=== RUN TestAccAWSRoute53HealthCheck_withChildHealthChecks
--- PASS: TestAccAWSRoute53HealthCheck_withChildHealthChecks (20.71s)
=== RUN TestAccAWSRoute53HealthCheck_IpConfig
--- PASS: TestAccAWSRoute53HealthCheck_IpConfig (16.09s)
=== RUN TestAccAWSRoute53HealthCheck_CloudWatchAlarmCheck
--- PASS: TestAccAWSRoute53HealthCheck_CloudWatchAlarmCheck (22.42s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 132.568s
```
The update of the test was causing a test failure - it was setting
desired_count to 1 when miz_size was set to 2 - this was causing a
perpetual diff in the test
Was failing due to using IAM user `test-name` as it was being used in
more than 1 place - this has been replaced by a random user and random
policy names now
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSUserPolicyAttachment_basic' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/31 08:39:08 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSUserPolicyAttachment_basic -timeout 120m
=== RUN TestAccAWSUserPolicyAttachment_basic
--- PASS: TestAccAWSUserPolicyAttachment_basic (32.04s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 32.053s
```
Previously this resource (and, by extension, the aws_ami_copy and
aws_ami_from_instance resources that share much of its implementation)
was handling correctly the case where an AMI had been recently
deregistered, and was thus still returned from the API, but not correctly
dealing with the situation where the AMI has been removed altogether.
Now we additionally handle the NotFound error returned by the API when
we request a non-existent AMI, and remove the AMI from the state in the
same way we do for deregistered AMIs.
This resource allows writing a generic secret, and indeed anything else
that obeys the expected create/update/delete lifecycle, into vault via
writes to its logical path namespace.
To reduce the risk of secret exposure via Terraform state and log output,
we default to creating a relatively-short-lived token (20 minutes) such
that Vault can, where possible, automatically revoke any retrieved
secrets shortly after Terraform has finished running.
This has some implications for usage of this provider that will be spelled
out in more detail in the docs that will be added in a later commit, but
the most significant implication is that a plan created by "terraform plan"
that includes secrets leased from Vault must be *applied* before the
lease period expires to ensure that the issued secrets remain valid.
No resources yet. They will follow in subsequent commits.
* provider/google Document MySQL versions for second generation instances
Google Cloud SQL has first-gen and second-gen instances with different
supported versions of MySQL.
* provider/google Increase SQL Admin operation timeout to 10 minutes
Creating SQL instances for MySQL 5.7 can take over 7 minutes,
so the timeout needs to be increased to allow the
google_sql_database_instance resource to successfully create.
This commit adds an ability to modify the `AutoMinorVersionUpgrade` property of the
Replication Group (which is enabled by default) accordingly.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Adding private gateway and static route resource to cloudstack provider
Testing the private gateway and static route resource requires a ROOT
account in Cloudstack
* changes requested by reviewer
Fixes#9654
Before the fix, I created an ASG with a schedule on it. Went to the AWS
console and deleted the schedule. A terraform plan looked as follows:
```
% terraform plan
See https://www.terraform.io/docs/internals/internal-plugins.html
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but
will not be persisted to local or remote state storage.
aws_launch_configuration.foobar: Refreshing state... (ID:
terraform-test-foobar5)
aws_autoscaling_group.foobar: Refreshing state... (ID:
terraform-test-foobar5)
aws_autoscaling_schedule.foobar: Refreshing state... (ID: foobar)
Error refreshing state: 1 error(s) occurred:
* aws_autoscaling_schedule.foobar: Unable to find Autoscaling
* Scheduled Action: []*autoscaling.ScheduledUpdateGroupAction(nil)
```
After the fix:
```
terraform plan 1 ↵
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but
will not be persisted to local or remote state storage.
aws_launch_configuration.foobar: Refreshing state... (ID: terraform-test-foobar5)
aws_autoscaling_group.foobar: Refreshing state... (ID: terraform-test-foobar5)
aws_autoscaling_schedule.foobar: Refreshing state... (ID: foobar)
The Terraform execution plan has been generated and is shown below.
Resources are shown in alphabetical order for quick scanning. Green resources
will be created (or destroyed and then created if an existing resource
exists), yellow resources are being changed in-place, and red resources
will be destroyed. Cyan entries are data sources to be read.
Note: You didn't specify an "-out" parameter to save this plan, so when
"apply" is called, Terraform can't guarantee this is what will execute.
+ aws_autoscaling_schedule.foobar
arn: "<computed>"
autoscaling_group_name: "terraform-test-foobar5"
desired_capacity: "0"
end_time: "2018-01-16T13:00:00Z"
max_size: "0"
min_size: "0"
recurrence: "<computed>"
scheduled_action_name: "foobar"
start_time: "2018-01-16T07:00:00Z"
Plan: 1 to add, 0 to change, 0 to destroy.
```
Tests run as expected:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSAutoscalingSchedule_' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/27 17:45:19 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSAutoscalingSchedule_ -timeout 120m
=== RUN TestAccAWSAutoscalingSchedule_basic
--- PASS: TestAccAWSAutoscalingSchedule_basic (140.94s)
=== RUN TestAccAWSAutoscalingSchedule_disappears
--- PASS: TestAccAWSAutoscalingSchedule_disappears (179.17s)
=== RUN TestAccAWSAutoscalingSchedule_recurrence
--- PASS: TestAccAWSAutoscalingSchedule_recurrence (186.72s)
=== RUN TestAccAWSAutoscalingSchedule_zeroValues
--- PASS: TestAccAWSAutoscalingSchedule_zeroValues (167.73s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 674.530s
```
* provider/aws: data source for AWS Security Group
* provider/aws: add documentation for data source for AWS Security Group
* provider/aws: data source for AWS Security Group (improve if condition and syntax)
* fix fmt
* provider/scaleway: fix scaleway_volume_attachment with count > 1
since scaleway requires servers to be powered off to attach volumes to, we need
to make sure that we don't power down a server twice, or power up a server while
it's supposed to be modified.
sadly terraform doesn't seem to sport serialization primitives for usecases like
this, but putting the code in question behind a `sync.Mutex` does the trick, too
fixes#9417
* provider/scaleway: use mutexkv to lock per-resource
following @dcharbonnier suggestion. thanks!
* provider/scaleway: cleanup waitForServerState signature
* provider/scaleway: store serverID in var
* provider/scaleway: correct imports
* provider/scaleway: increase timeouts
* Improve messaging when storage account isn't found.
* Add client for finding resources when you don't know it's resource group.
* Add function to find Storage Account resource group name.
* Use the storage account resource group, not the virtual machine's resource group when deleting VHDs.
* Add description of storage account ID for clarity.
* Improve VHD deletion test when storage account is in different resource group.
* Use common function for ID parsing of storage account.
* Add AWS Prefix List data source.
AWS Prefix List data source acceptance test.
AWS Prefix List data source documentation.
* Improve error message when PL not matched.
* provider/scaleway speedup server deletion
using `terminate` instead of `poweroff` leads to a faster shutdown
fixes#9430
* provider/scaleway: extract server shutdown code
This test was previously passing but the limit appears to have been reduced
since.
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMServiceBusTopic_enableParti -timeout 120m
=== RUN TestAccAzureRMServiceBusTopic_enablePartitioning
--- PASS: TestAccAzureRMServiceBusTopic_enablePartitioning (377.14s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 377.235s
* Updated docker container documentation
Feedback from ticket #9350 indicated that documentation was out of date
renamed `hosts_entry` to `host`
added correct type information to *Extra Hosts* section.
Refs: 9350
* Fixes for docker_container host object
Feedback from ticket #9350 updated codebase so it reflects the requirements from docker in regards to `host` which is `Required` and not optional.
It now accurately reflects the docker requirements and the terraform documentation.
Test results
> Bear in mind the failure it is because my laptop doesnt support memory swap. So this test will always fail.
Changing the Schema from `optional` to `required` made no difference to the tests.
make testacc TEST=./builtin/providers/docker/
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/14 15:04:40 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/docker/ -v -timeout 120m
=== RUN TestAccDockerRegistryImage_basic
--- PASS: TestAccDockerRegistryImage_basic (4.57s)
=== RUN TestAccDockerRegistryImage_private
--- PASS: TestAccDockerRegistryImage_private (6.22s)
=== RUN TestProvider
--- PASS: TestProvider (0.00s)
=== RUN TestProvider_impl
--- PASS: TestProvider_impl (0.00s)
=== RUN TestAccDockerContainer_basic
--- PASS: TestAccDockerContainer_basic (7.16s)
=== RUN TestAccDockerContainer_volume
--- PASS: TestAccDockerContainer_volume (7.37s)
=== RUN TestAccDockerContainer_customized
--- FAIL: TestAccDockerContainer_customized (18.99s)
testing.go:265: Step 0 error: Check failed: Check 2/2 error: Container has wrong memory swap setting: -1
Please check that you machine supports memory swap (you can do that by running 'docker info' command).
=== RUN TestAccDockerImage_basic
--- PASS: TestAccDockerImage_basic (2.58s)
=== RUN TestAccDockerImage_private
--- PASS: TestAccDockerImage_private (2.70s)
=== RUN TestAccDockerImage_destroy
--- PASS: TestAccDockerImage_destroy (30.00s)
=== RUN TestAccDockerImage_data
--- PASS: TestAccDockerImage_data (5.93s)
=== RUN TestAccDockerNetwork_basic
--- PASS: TestAccDockerNetwork_basic (0.24s)
=== RUN TestAccDockerVolume_basic
--- PASS: TestAccDockerVolume_basic (0.05s)
FAIL
exit status 1
FAIL github.com/hashicorp/terraform/builtin/providers/docker 85.816s
Makefile:47: recipe for target 'testacc' failed
make: *** [testacc] Error 1
Refs: 9350
* govendor: update go-cloudstack dependency
* Separate security groups and rules
This commit separates the creation and management of security groups and security group rules.
It extends the `icmp` options so you can supply `icmp_type` and `icmp_code` to enbale more specific configs.
And it adds lifecycle management of security group rules, so that security groups do not have to be recreated when rules are added or removed.
This is particulary helpful since the `cloudstack_instance` cannot update a security group without having to recreate the instance.
In CloudStack >= 4.9.0 it is possible to update security groups of existing instances, but as that is just added to the latest version it seems a bit too soon to start using this (causing backwards incompatibility issues for people or service providers running older versions).
* Add and update documentation
* Add acceptance tests
Added `service_id` in place of `id` for resource.
modified created, read, update to use `service_id`
modified tests to include `service_id`.
modified documentation for consul_service to include new value.
Tests results
CONSUL_HTTP_ADDR=localhost:8500 make testacc TEST=./builtin/providers/consul/
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/14 14:43:05 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/consul/ -v -timeout 120m
=== RUN TestAccDataConsulKeys_basic
--- PASS: TestAccDataConsulKeys_basic (0.05s)
=== RUN TestAccConsulAgentService_basic
--- PASS: TestAccConsulAgentService_basic (0.05s)
=== RUN TestAccConsulCatalogEntry_basic
--- PASS: TestAccConsulCatalogEntry_basic (0.06s)
=== RUN TestAccConsulKeyPrefix_basic
--- PASS: TestAccConsulKeyPrefix_basic (0.19s)
=== RUN TestConsulKeysMigrateState
--- PASS: TestConsulKeysMigrateState (0.00s)
=== RUN TestConsulKeysMigrateState_empty
--- PASS: TestConsulKeysMigrateState_empty (0.00s)
=== RUN TestAccConsulKeys_basic
--- PASS: TestAccConsulKeys_basic (0.13s)
=== RUN TestAccConsulNode_basic
--- PASS: TestAccConsulNode_basic (0.05s)
=== RUN TestAccConsulPreparedQuery_basic
--- PASS: TestAccConsulPreparedQuery_basic (0.12s)
=== RUN TestAccConsulService_basic
--- PASS: TestAccConsulService_basic (0.05s)
=== RUN TestResourceProvider
--- PASS: TestResourceProvider (0.00s)
=== RUN TestResourceProvider_impl
--- PASS: TestResourceProvider_impl (0.00s)
=== RUN TestResourceProvider_Configure
--- PASS: TestResourceProvider_Configure (0.00s)
=== RUN TestResourceProvider_ConfigureTLS
--- PASS: TestResourceProvider_ConfigureTLS (0.00s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/consul 0.708s
Refs: #9352
* Clean-up for Go 1.7+ version.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Validate regular expression passed via the `name_regex` attribute.
This commit adds a simple ValidateFunc to check whether the regular
expression that was passed down via the `name_regex` attribute is valid.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This is a fix for issue https://github.com/hashicorp/terraform/issues/9596.
Changes:
- Adds new output attribute `configuration_endpoint_address`. Only
used in Redis when in cluster mode.
- Read the `snapshot_window` and `snapshot_retention_limit` from
the
replication group description instead of the cache cluster
description.
- Adds acceptance test and modifies an existing acceptance test to
make sure that everything is still good in non-cluster mode
- Updates docs to describe new output attribute
This reverts commit c3a4cff133, reversing
changes made to 791a02e6e4.
This change requires plugin recompilation and we should hold off until a
minor release for that.
This commit introduces an `aws_iam_user_login_profile` resource which
creates a password for an IAM user, and encrypts it using a PGP key
specified in the configuration or obtained from Keybase.
For example:
```
resource "aws_iam_user" "u" {
name = "auser"
path = "/"
force_destroy = true
}
resource "aws_iam_user_login_profile" "u" {
user = "${aws_iam_user.u.name}"
pgp_key = "keybase:some_person_that_exists"
}
output "password" {
value = "${aws_iam_user_login_profile.u.encrypted_password}"
}
```
The resulting attribute "encrypted_password" can be decrypted using
PGP or Keybase - for example:
```
terraform output password | base64 --decode | keybase pgp decrypt
```
Optionally the user can retain the password rather than the default of
being forced to change it at first login. Generated passwords are
currently 20 characters long.
TF_ACC=1 go test ./builtin/providers/azurerm -v -run=TestAccAzureRMVirtualMachine_basicLinuxMachine -timeout 120m
=== RUN TestAccAzureRMVirtualMachine_basicLinuxMachine
--- PASS: TestAccAzureRMVirtualMachine_basicLinuxMachine (540.83s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 540.841s
TF_ACC=1 go test ./builtin/providers/azurerm -v -run=TestAccAzureRMVirtualMachine_withDataDisk -timeout 120m
=== RUN TestAccAzureRMVirtualMachine_withDataDisk
--- PASS: TestAccAzureRMVirtualMachine_withDataDisk (431.19s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 431.203s
enable_partitioning set to ForceNew
requires_duplicate_detection set to ForceNew
max_size_in_megabytes would cause a loop if enable_partitioning was true as this
causes the value to be multiplied by 16 for it's effective value, this computed
value is then returned by the ARM API in the same field which caused Terraform
to always detect a change
```
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMServiceBusTopic -timeout 120m
=== RUN TestAccAzureRMServiceBusTopic_importBasic
--- PASS: TestAccAzureRMServiceBusTopic_importBasic (345.08s)
=== RUN TestAccAzureRMServiceBusTopic_basic
--- PASS: TestAccAzureRMServiceBusTopic_basic (342.23s)
=== RUN TestAccAzureRMServiceBusTopic_update
--- PASS: TestAccAzureRMServiceBusTopic_update (359.56s)
=== RUN TestAccAzureRMServiceBusTopic_enablePartitioning
--- PASS: TestAccAzureRMServiceBusTopic_enablePartitioning (362.80s)
=== RUN TestAccAzureRMServiceBusTopic_enableDuplicateDetection
--- PASS: TestAccAzureRMServiceBusTopic_enableDuplicateDetection (364.97s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 1774.657s
```
* Converting archive_file to datasource.
* Ratcheting back new dir perms.
* Ratcheting back new dir perms.
* goimports
* Adding output_base64sha256 attribute to archive_file.
Updating docs.
* Dropping CheckDestroy since this is a data source.
* Correcting data source attribute checks.
This will allow us to catch errors at plan time rather than waiting for
the API to tell us...
Documentation for IAM User NAme Validation -
http://docs.aws.amazon.com/cli/latest/reference/iam/create-user.html
Documentation for IAM Group Name validation -
http://docs.aws.amazon.com/cli/latest/reference/iam/create-group.html
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSIAMGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/25 13:18:41 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSIAMGroup_
-timeout 120m
=== RUN TestAccAWSIAMGroup_importBasic
--- PASS: TestAccAWSIAMGroup_importBasic (13.80s)
=== RUN TestAccAWSIAMGroup_basic
--- PASS: TestAccAWSIAMGroup_basic (23.30s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws37.121s
```
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSUser_' ✚
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/25 13:22:23 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSUser_ -timeout 120m
=== RUN TestAccAWSUser_importBasic
--- PASS: TestAccAWSUser_importBasic (14.33s)
=== RUN TestAccAWSUser_basic
--- PASS: TestAccAWSUser_basic (25.36s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 39.710s
```
When force_Destroy was specified on an iam_user, only Access Keys were
destroyed. Therefore, if a password was manually added via the AWS
console, it was causing an error as follows:
```
* aws_iam_user.user: Error deleting IAM User test-user-for-profile-delete: DeleteConflict: Cannot delete entity, must delete login profile first.
status code: 409, request id: acd67e40-9aa8-11e6-8533-4db80bad7ea8
```
We now *try* to delete the LoginProfile and ignore a NoSuchEntity error
if it doesn't exist
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSUser_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/25 12:53:05 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSUser_
-timeout 120m
=== RUN TestAccAWSUser_importBasic
--- PASS: TestAccAWSUser_importBasic (14.83s)
=== RUN TestAccAWSUser_basic
--- PASS: TestAccAWSUser_basic (24.78s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws39.624s
```
The tests were referencing an old bootscript - this just bumps the value
to the latest. The list of bootscripts can be found at
http://devhub.scaleway.com/#/bootscripts
gophercloud/gophercloud no longer supports the APIKey authentication
attribute. Removal of this attribute may impact users who were using
the Terraform OpenStack provider in with vendor-modified clouds.
- The name cannot be empty
- The name cannot be more than 80 characters
- The name must begin with a letter or number
- The name must end with a letter, number, or underscore
- The name must only contain letters, numbers, underscores, periods, or hyphens
This commit is a maintenance change aimed at aligning file names so that they
fall in line with the established naming convention.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit changes the behaviour of the `ExistsFunc`, where by default
lack of a route table (e.g. already removed, etc.) would cause an error
to be thrown. This makes is hard to carry out any action e.g. plan,
refresh, or destroy, that rely on the route table existance check.
Also, make error messages a little better in terms of wording, etc.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
The check for ARM_SUBSCRIPTION_ID breaks the PR testing. The PR
testing isn't trying to check acceptance tests anyway.
There will still be a correct failure for missing ARM_SUBSCRIPTION_ID
when running the acceptance test due to the later testAccPreCheck().
bootscripts allow you to start Scaleway servers with a specific kernel version.
The `scaleway_server` has always had a bootscript parameter, and the
`scaleway_bootscript` datasource allows you to lookup bootscripts to be used in
conjunction with the `scaleway_server` resource.
This commit tests whether an interface is nil before type asserting it
to string - this should fix the panic reported in #8609.
We also clean up the schema definition to the newer style without
redundant type declarations.
Make sure to hash base64 decoded value since user_data might be given
either raw bytes or base64 value.
This helps https://github.com/hashicorp/terraform/issues/1887 somewhat
as now you can:
1) Update user_data in AWS console.
2) Respectively update user_data in terraform code.
3) Just refresh terraform state and it should not report any changes.
This commit adds a missing unit test for the API Gateway integration type
attribute validation helper, plus changes the way how value is inspected
to a simple lookup table. Additionally, changes the wording of the error
message, and adds invalid test cases to the HTTP method validation helper.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This pull request is intended to add a temporary control to Terraform to
output more verbose logging in the case of an AuthFailure error being
returned by the AWS API.
The tag schema was changed in #9199, setting the Computed flag, this was causing
the plan to not be empty for resources which support tags but none were set, as
no value would be set by flattenAndSetTags.
Setting an empty map instead fixes the issue, ran original failing test and an
update tags test to ensure nothing else was broken.
Depends on #9305.
```
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMCdnProfile -timeout 120m
=== RUN TestAccAzureRMCdnProfile_importWithTags
--- PASS: TestAccAzureRMCdnProfile_importWithTags (171.64s)
=== RUN TestAccAzureRMCdnProfile_basic
--- PASS: TestAccAzureRMCdnProfile_basic (162.70s)
=== RUN TestAccAzureRMCdnProfile_withTags
--- PASS: TestAccAzureRMCdnProfile_withTags (203.12s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 537.538s
```
cdn_profile resource was using `Profiles` instead of `profiles` to gather the
name in the read and delete methods, added importing capability with test to
confirm read now works as expected.
```
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMCdnProfile -timeout 120m
=== RUN TestAccAzureRMCdnProfile_importWithTags
--- PASS: TestAccAzureRMCdnProfile_importWithTags (170.00s)
=== RUN TestAccAzureRMCdnProfile_basic
--- PASS: TestAccAzureRMCdnProfile_basic (166.33s)
=== RUN TestAccAzureRMCdnProfile_withTags
--- PASS: TestAccAzureRMCdnProfile_withTags (185.94s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 522.333s
```
This commits changes the behaviour in a case there was an error while
interacting with EC2 tags related to the CloudFormation Distribution
resource, fixing the issue with nil pointer dereference when despite
an error being present code path to handle tags was executed.
Also, a small re-factor of the `validateHTTP` helper method,
and a unit test added for it.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
panic on the Read func
Fixes#8995
The Diagnostics profile was a badly laid out resource. All we needed to
set was whether it was enabled and the storage account to save the logs
to. The old schema parameter was deprecated and replaced with a much
simplier structure
```
% make testacc TEST=./builtin/providers/azurerm TESTARGS='-run=TestAccAzureRMVirtualMachine_diagnosticsProfile'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/29 12:21:04 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/azurerm -v
-run=TestAccAzureRMVirtualMachine_diagnosticsProfile -timeout 120m
=== RUN TestAccAzureRMVirtualMachine_diagnosticsProfile
--- PASS: TestAccAzureRMVirtualMachine_diagnosticsProfile (1066.76s)
PASS
ok
github.com/hashicorp/terraform/builtin/providers/azurerm1066.776s
```
The Read func of the EIP has changed to set the `vpc` boolean value on
the response object having an Address. This is required as an EIP that
was specified, without a domain and then imported, would cause a
perpetual plan.
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEIP_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/23 09:28:32 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSEIP_ -timeout
120m
=== RUN TestAccAWSEIP_importEc2Classic
--- PASS: TestAccAWSEIP_importEc2Classic (116.16s)
=== RUN TestAccAWSEIP_importVpc
--- PASS: TestAccAWSEIP_importVpc (61.89s)
=== RUN TestAccAWSEIP_basic
--- PASS: TestAccAWSEIP_basic (18.86s)
=== RUN TestAccAWSEIP_instance
--- PASS: TestAccAWSEIP_instance (185.95s)
=== RUN TestAccAWSEIP_network_interface
--- PASS: TestAccAWSEIP_network_interface (63.20s)
=== RUN TestAccAWSEIP_twoEIPsOneNetworkInterface
--- PASS: TestAccAWSEIP_twoEIPsOneNetworkInterface (65.64s)
=== RUN TestAccAWSEIP_associated_user_private_ip
--- PASS: TestAccAWSEIP_associated_user_private_ip (201.34s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 713.072s
```
This commit resolves a regression introduced in #9033 that caused an
unfiltered image to be returned despite a search criteria being set
accordingly.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This allows Storage Service Encryption to be enabled.
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMStorageAccount -timeout 120m
=== RUN TestAccAzureRMStorageAccount_importBasic
--- PASS: TestAccAzureRMStorageAccount_importBasic (139.00s)
=== RUN TestAccAzureRMStorageAccount_basic
--- PASS: TestAccAzureRMStorageAccount_basic (151.03s)
=== RUN TestAccAzureRMStorageAccount_blobEncryption
--- PASS: TestAccAzureRMStorageAccount_blobEncryption (149.94s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 440.051s
This commit adds a new HTTP method to a list of valid HTTP methods which
is now accepted by API Gateway.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
A default authorization rule is created by Azure which, if present is exported by
the resource.
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMServiceBusNamespace -timeout 120m
=== RUN TestAccAzureRMServiceBusNamespaceCapacity_validation
--- PASS: TestAccAzureRMServiceBusNamespaceCapacity_validation (0.00s)
=== RUN TestAccAzureRMServiceBusNamespaceSku_validation
--- PASS: TestAccAzureRMServiceBusNamespaceSku_validation (0.00s)
=== RUN TestAccAzureRMServiceBusNamespace_basic
--- PASS: TestAccAzureRMServiceBusNamespace_basic (352.03s)
=== RUN TestAccAzureRMServiceBusNamespace_readDefaultKeys
--- PASS: TestAccAzureRMServiceBusNamespace_readDefaultKeys (349.17s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 701.278s
use us-west-2 region in tests
update test with working config
provider/aws: Update EMR contribution with passing test, polling for instance in DELETE method
remove defaulted role
document emr_cluster
rename aws_emr -> aws_emr_cluster
update docs for name change
update delete timeout/polling
rename emr taskgroup to emr instance group
default instance group count to 0, down from 60
update to ref emr_cluster, emr_instance_group
more cleanups for instance groups; need to read and update
add read, delete method for instance groups
refactor the read method to seperate out the fetching of the specific group
more refactoring for finding instance groups
update emr instance group docs
err check on reading HTTP. Dont' return the error, just log it
refactor the create method to catch optionals
additional cleanups, added a read method
update test to be non-master-only
wrap up the READ method for clusters
poll for instance group to be running after a modification
patch up a possible deref
provider/aws: EMR cleanups
fix test naming
remove outdated docs
randomize emr_profile names
quick emr resize implementation
ass task group
not force new
add task group
check empty slices
clean up
rename to initial_instance_count
add task instance group as resource
cluster resize core group
clean up
add name option
log info
clean up
change log debug format
clean up
add missing security groups for master and slave
add bootstrap actions
add options for bootstrap action
add tags option
clean up
fix for tags array
support delimiters : =
bootstrap actions fix
add configurations item
load local or remote config
rename function
support multiple bootstrap actions
default value 0 for core group
follow aws api able to create a master only
tags use terraform tag schema
option item for log_uri
ec2_attribute as option
add emr task group accTests
add embedded json config
add embedded json config
add service_role and instance_profile
add partial state support for either the "TERMINATED" or "TERMINATED_WITH_ERRORS" state
not allowing to change name or instance_type for task group
"core_instance_type" change into "Optional" and "Computed"
apply MaxItems for ec2Attributes
remove all debug "fmt.Println"
clean up debug info and useless variable
Expose visible_to_all_users as an option, default will be true
remove debug info
logging should happen before setId("")
add hanChange checking first
clean up debug log
add some force new
double check the core group existed
add waiting and polling, until cluster up
testcase add EMR cluster id and status checking
clean up using common way to read ec2_attributes
This new struct avoids requiring to repeat the struct definition in this
code here. It avoids duplication and makes it more flexible so more
options can be added to the struct without breaking the code here.
Fixes#9194
Removes the validation for the types and adds an acceptance test to make
sure we get a successful Sql Database created
```
% make testacc TEST=./builtin/providers/azurerm TESTARGS='-run=TestAccAzureRMSqlDatabase_datawarehouse'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/03 21:57:16 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/azurerm -v
-run=TestAccAzureRMSqlDatabase_datawarehouse -timeout 120m
=== RUN TestAccAzureRMSqlDatabase_datawarehouse
--- PASS: TestAccAzureRMSqlDatabase_datawarehouse (307.95s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm307.963s
```
The casing on the test name was causing it not to run with the entire
test suite
```
% make testacc TEST=./builtin/providers/aws
% TESTARGS='-run=TestAccAWSOpsworksStack' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/03 16:43:07 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSOpsworksStack
-timeout 120m
=== RUN TestAccAWSOpsworksStackImportBasic
--- PASS: TestAccAWSOpsworksStackImportBasic (49.00s)
=== RUN TestAccAWSOpsworksStackNoVpc
--- PASS: TestAccAWSOpsworksStackNoVpc (36.10s)
=== RUN TestAccAWSOpsworksStackVpc
--- PASS: TestAccAWSOpsworksStackVpc (73.27s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws158.385s
```
As noticed in the acceptance tests, we were expecting the document to be
deleted but it was still found
```
=== RUN TestAccAWSSSMDocument_permission
--- FAIL: TestAccAWSSSMDocument_permission (5.60s)
testing.go:329: Error destroying resource! WARNING: Dangling
resources
may exist. The full state and error is shown below.
Error: Check failed: Expected AWS SSM
Document to be gone, but was still found
State: <no state>
```
Some azurerm resources store resource_group_name in lowercase only.
Other store resource_group_name using lower and upper case.
Ensure that all test cases use capitalisation in resource_group_name
to find errors in diffs due to capitalisation.
Some resource_group_name were refactored to match naming scheme
across the azurerm tests.
Regressions were introduced when fixing
https://github.com/hashicorp/terraform/pull/8607 . Specifically when
resources in the statefile are deleted or missing in real life, then
terraform plan would exit with an error when it recieved a 404 not
found. The correct behaviour would be to show a plan with the offer to
create the missing resources.
If a resource ID has more than one subscriptions key, as is the case for Service
Bus subscriptions the Azure SubscriptionID field was overwritten by the second
value.
TF_ACC= go test ./builtin/providers/azurerm -run TestParseAzureResourceID -timeout=30s -parallel=4
ok github.com/hashicorp/terraform/builtin/providers/azurerm 0.060s
Fixes#9108
When an aws_route53_record alias is created with terraform and then
modified via cli or console, terraform wasn't picking up the changes. I
had the following config:
```
resource "aws_route53_record" "alias" {
zone_id = "${aws_route53_zone.main.zone_id}"
name = "www"
type = "A"
alias {
zone_id = "${aws_elb.main.zone_id}"
name = "${aws_elb.main.dns_name}"
evaluate_target_health = true
}
}
```
I changed the evaluate_health_target on the AWS console and terraform plan showed me this:
```
% terraform plan
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but
will not be persisted to local or remote state storage.
aws_route53_zone.main: Refreshing state... (ID: Z32Z9B1UPAIP6X)
aws_elb.main: Refreshing state... (ID: foobar-terraform-elb-1111)
aws_route53_record.alias: Refreshing state... (ID: Z32Z9B1UPAIP6X_www_A)
No changes. Infrastructure is up-to-date. This means that Terraform
could not detect any differences between your configuration and
the real physical resources that exist. As a result, Terraform
doesn't need to do anything.
```
When rebuilding the provider with the changes in the PR, a terraform plan then looks as follows:
```
% terraform plan
[WARN] /Users/stacko/Code/go/bin/terraform-provider-aws overrides an internal plugin for aws-provider.
If you did not expect to see this message you will need to remove the old plugin.
See https://www.terraform.io/docs/internals/internal-plugins.html
[WARN] /Users/stacko/Code/go/bin/terraform-provider-azurerm overrides an internal plugin for azurerm-provider.
If you did not expect to see this message you will need to remove the old plugin.
See https://www.terraform.io/docs/internals/internal-plugins.html
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but
will not be persisted to local or remote state storage.
aws_route53_zone.main: Refreshing state... (ID: Z32Z9B1UPAIP6X)
aws_elb.main: Refreshing state... (ID: foobar-terraform-elb-1111)
aws_route53_record.alias: Refreshing state... (ID: Z32Z9B1UPAIP6X_www_A)
The Terraform execution plan has been generated and is shown below.
Resources are shown in alphabetical order for quick scanning. Green resources
will be created (or destroyed and then created if an existing resource
exists), yellow resources are being changed in-place, and red resources
will be destroyed. Cyan entries are data sources to be read.
Note: You didn't specify an "-out" parameter to save this plan, so when
"apply" is called, Terraform can't guarantee this is what will execute.
~ aws_route53_record.alias
alias.1050468691.evaluate_target_health: "" => "true"
alias.1050468691.name: "" => "foobar-terraform-elb-1111-522021794.us-west-2.elb.amazonaws.com"
alias.1050468691.zone_id: "" => "Z1H1FL5HABSF5"
alias.2906616344.evaluate_target_health: "false" => "false"
alias.2906616344.name: "foobar-terraform-elb-1111-522021794.us-west-2.elb.amazonaws.com." => ""
alias.2906616344.zone_id: "Z1H1FL5HABSF5" => ""
Plan: 0 to add, 1 to change, 0 to destroy.
```
the apply then changed the target back to true
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRoute53Record_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/29 18:17:23 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSRoute53Record_ -timeout 120m
=== RUN TestAccAWSRoute53Record_basic
--- PASS: TestAccAWSRoute53Record_basic (120.63s)
=== RUN TestAccAWSRoute53Record_basic_fqdn
--- PASS: TestAccAWSRoute53Record_basic_fqdn (131.81s)
=== RUN TestAccAWSRoute53Record_txtSupport
--- PASS: TestAccAWSRoute53Record_txtSupport (128.40s)
=== RUN TestAccAWSRoute53Record_spfSupport
--- PASS: TestAccAWSRoute53Record_spfSupport (120.06s)
=== RUN TestAccAWSRoute53Record_generatesSuffix
--- PASS: TestAccAWSRoute53Record_generatesSuffix (114.02s)
=== RUN TestAccAWSRoute53Record_wildcard
--- PASS: TestAccAWSRoute53Record_wildcard (165.54s)
=== RUN TestAccAWSRoute53Record_failover
--- PASS: TestAccAWSRoute53Record_failover (118.10s)
=== RUN TestAccAWSRoute53Record_weighted_basic
--- PASS: TestAccAWSRoute53Record_weighted_basic (128.10s)
=== RUN TestAccAWSRoute53Record_alias
--- PASS: TestAccAWSRoute53Record_alias (132.62s)
=== RUN TestAccAWSRoute53Record_s3_alias
--- PASS: TestAccAWSRoute53Record_s3_alias (132.12s)
=== RUN TestAccAWSRoute53Record_weighted_alias
--- PASS: TestAccAWSRoute53Record_weighted_alias (237.92s)
=== RUN TestAccAWSRoute53Record_geolocation_basic
--- PASS: TestAccAWSRoute53Record_geolocation_basic (121.95s)
=== RUN TestAccAWSRoute53Record_latency_basic
--- PASS: TestAccAWSRoute53Record_latency_basic (123.40s)
=== RUN TestAccAWSRoute53Record_TypeChange
--- PASS: TestAccAWSRoute53Record_TypeChange (198.24s)
=== RUN TestAccAWSRoute53Record_empty
--- PASS: TestAccAWSRoute53Record_empty (119.68s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws2092.597s
```
Initial tests were failing as follows:
```
=== RUN TestAccAWSElasticacheCluster_importBasic
--- FAIL: TestAccAWSElasticacheCluster_importBasic (362.66s)
testing.go:265: Step 1 error: ImportStateVerify attributes not
equivalent. Difference is shown below. Top is actual, bottom is
expected.
(map[string]string) {
}
(map[string]string) (len=2) {
(string) (len=20) "parameter_group_name": (string) (len=20)
"default.memcached1.4",
(string) (len=22) "security_group_names.#":
(string) (len=1) "0"
}
FAIL
exit status 1
```
The import of ElastiCache clusters helped to point out 3 things:
1. Currently, we were trying to set the parameter_group_name as follows:
```
d.Set("parameter_group_name", c.CacheParameterGroup)
```
Unfortunately, c.CacheParameterGroup is a struct not a string. This was
causing the test import failure. So this had to be replaced as follows:
```
if c.CacheParameterGroup != nil {
d.Set("parameter_group_name", c.CacheParameterGroup.CacheParameterGroupName)
}
```
2. We were trying to set the security_group_names as follows:
```
d.Set("security_group_names", c.CacheSecurityGroups)
```
The CacheSecurityGroups was actually a []* so had to be changed to work
as follows:
```
if len(c.CacheSecurityGroups) > 0 {
d.Set("security_group_names",
flattenElastiCacheSecurityGroupNames(c.CacheSecurityGroups))
}
```
3. We were trying to set the security_group_ids as follows:
```
d.Set("security_group_ids", c.SecurityGroups)
```
This is another []* and needs to be changed as follows:
```
if len(c.SecurityGroups) > 0 {
d.Set("security_group_ids",
flattenElastiCacheSecurityGroupIds(c.SecurityGroups))
}
```
This then allows the import test to pass as expected:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElasticacheCluster_importBasic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/23 10:59:01 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSElasticacheCluster_importBasic -timeout 120m
=== RUN TestAccAWSElasticacheCluster_importBasic
--- PASS: TestAccAWSElasticacheCluster_importBasic (351.96s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 351.981s
```
As a final test, I ran the basic ElastiCache cluster creation to make
sure all passed as expected:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElasticacheCluster_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/23 11:05:51 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSElasticacheCluster_basic -timeout 120m
=== RUN TestAccAWSElasticacheCluster_basic
--- PASS: TestAccAWSElasticacheCluster_basic (809.25s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 809.267s
```
Fixes#8597
There was sometimes an issue where Terraform was deleting the ECR
repository from the statefile before the reposity was actually deleted.
Added retry logic for Terraform to wait for the repository to be deleted
before proceeding with the statefile update
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEcrRepository_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/26 12:46:57 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSEcrRepository_ -timeout 120m
=== RUN TestAccAWSEcrRepository_importBasic
--- PASS: TestAccAWSEcrRepository_importBasic (17.86s)
=== RUN TestAccAWSEcrRepository_basic
--- PASS: TestAccAWSEcrRepository_basic (16.40s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 34.288s
```
aws_elasticache_replication_group caused a panic
Fixes#9097
The update for `parameter_group_name` was trying to find the incorrect
value to set `cache_parameter_group_name` - this is what was causing the
panic
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElasticacheReplicationGroup_updateParameterGroup'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/28 11:17:30 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSElasticacheReplicationGroup_updateParameterGroup -timeout
120m
=== RUN TestAccAWSElasticacheReplicationGroup_updateParameterGroup
--- PASS: TestAccAWSElasticacheReplicationGroup_updateParameterGroup
(903.90s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws903.931s
```
values
Fixes#8332
Not all option_group parameters have values. For example, when you
enable the MariaDB option_group, some of the settings have empty values
(see screenshot)
This PR adds a safety net on reading those values back to the statefile
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBOptionGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/26 13:55:21 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSDBOptionGroup_ -timeout 120m
=== RUN TestAccAWSDBOptionGroup_importBasic
--- PASS: TestAccAWSDBOptionGroup_importBasic (20.12s)
=== RUN TestAccAWSDBOptionGroup_basic
--- PASS: TestAccAWSDBOptionGroup_basic (18.45s)
=== RUN TestAccAWSDBOptionGroup_basicDestroyWithInstance
--- PASS: TestAccAWSDBOptionGroup_basicDestroyWithInstance (597.90s)
=== RUN TestAccAWSDBOptionGroup_OptionSettings
--- PASS: TestAccAWSDBOptionGroup_OptionSettings (33.27s)
=== RUN TestAccAWSDBOptionGroup_sqlServerOptionsUpdate
--- PASS: TestAccAWSDBOptionGroup_sqlServerOptionsUpdate (33.39s)
=== RUN TestAccAWSDBOptionGroup_multipleOptions
--- PASS: TestAccAWSDBOptionGroup_multipleOptions (19.87s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 723.037s
```
Fixes#6758
We used to throw an error when this was the case - we should refresh
from state so the association can be recreated
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEIPAssociation_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/26 16:42:37 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSEIPAssociation_ -timeout 120m
=== RUN TestAccAWSEIPAssociation_basic
--- PASS: TestAccAWSEIPAssociation_basic (272.92s)
=== RUN TestAccAWSEIPAssociation_disappears
--- PASS: TestAccAWSEIPAssociation_disappears (119.62s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws392.559s
```
Fixes#9025
We were assuming there would always be a changeInfo record and then
dereferencing the ID. This wasn't always the case (As noted in #9025)
where it was a delete rather than a delete / create action
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRoute53Record_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/26 11:26:43 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSRoute53Record_ -timeout 120m
=== RUN TestAccAWSRoute53Record_basic
--- PASS: TestAccAWSRoute53Record_basic (114.99s)
=== RUN TestAccAWSRoute53Record_basic_fqdn
--- PASS: TestAccAWSRoute53Record_basic_fqdn (126.64s)
=== RUN TestAccAWSRoute53Record_txtSupport
--- PASS: TestAccAWSRoute53Record_txtSupport (113.25s)
=== RUN TestAccAWSRoute53Record_spfSupport
--- PASS: TestAccAWSRoute53Record_spfSupport (112.89s)
=== RUN TestAccAWSRoute53Record_generatesSuffix
--- PASS: TestAccAWSRoute53Record_generatesSuffix (113.29s)
=== RUN TestAccAWSRoute53Record_wildcard
--- PASS: TestAccAWSRoute53Record_wildcard (163.05s)
=== RUN TestAccAWSRoute53Record_failover
--- PASS: TestAccAWSRoute53Record_failover (121.15s)
=== RUN TestAccAWSRoute53Record_weighted_basic
--- PASS: TestAccAWSRoute53Record_weighted_basic (117.06s)
=== RUN TestAccAWSRoute53Record_alias
--- PASS: TestAccAWSRoute53Record_alias (116.97s)
=== RUN TestAccAWSRoute53Record_s3_alias
--- PASS: TestAccAWSRoute53Record_s3_alias (138.79s)
=== RUN TestAccAWSRoute53Record_weighted_alias
--- PASS: TestAccAWSRoute53Record_weighted_alias (241.48s)
=== RUN TestAccAWSRoute53Record_geolocation_basic
--- PASS: TestAccAWSRoute53Record_geolocation_basic (132.51s)
=== RUN TestAccAWSRoute53Record_latency_basic
--- PASS: TestAccAWSRoute53Record_latency_basic (121.29s)
=== RUN TestAccAWSRoute53Record_TypeChange
--- PASS: TestAccAWSRoute53Record_TypeChange (189.31s)
=== RUN TestAccAWSRoute53Record_empty
--- PASS: TestAccAWSRoute53Record_empty (127.31s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws
2050.012s
```
This commit adds simple logic which allows for a VPC Peering Connection
that is in a failed state (e.g. due to an overlapping IP address ranges,
etc.), to report such failed state as an error, rather then waiting for
the time out to occur.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
The primary purpose of this data source is to ask the question "what is
my current region?", but it can also be used to retrieve the endpoint
hostname for a particular (possibly non-current) region, should that be
useful for some esoteric case.
This adds a singular data source in addition to the existing plural one.
This allows retrieving data about a specific AZ.
As a helper for writing reusable modules, the AZ letter (without its
usual region name prefix) is exposed so that it can be used in
region-agnostic mappings where a different value is used per AZ, such as
for subnet numbering schemes.
These functions can be used within various EC2 data sources to support
querying by filter. The following cases are supported:
- Filtering by exact equality with single attribute values
- Filtering by EC2 tag key/value pairs
- Explicitly specifying raw EC2 filters in config
This should cover most of the filter use-cases for Terraform data
sources that are built on EC2's 'Describe...' family of functions.
In c244e5a6 this resource was converted to a data source, but that was
a mistake since data sources are expected to produce stable results on
each run, and yet certificate requests contain a random nonce as part of
the signature.
Additionally, using the data source as a managed resource through the
provided compatibility shim was not actually working, since "Read" was
trying to parse the private key out of a SHA1 hash of the key, which is
what we place in state due to the StateFunc on that attribute.
By restoring this we restore Terraform's ability to produce all of the
parts of a basic PKI/CA, which is useful for creating dev environments
and bootstrapping PKI for production environments.
This commit fixes the issues where in a very rare cases the Amazon Machine
Image (AMI) would not have an image name set causing regular expression match
to fail with a nil pointer dereference. Also, the logic of if-else statements
was simplified (reduced branching since return is used a lot).
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Looks like AWS updated their API and now our tests are failing
because QueryStringCacheKeys was not included in the distribution
configuration.
This adds support for specifying query string cache keys in the
CloudFront distribution configuration, which ensures that only a subset
of query string keys are actually cached when forwarding query strings,
possibly improving performance.
This fixes an issue where an empty s3_origin_config could be supplied to
aws_cloudfront_distribution, "correctly" setting an empty default value.
Unfortunately the rest of the CloudFront structure helper functions are
not equipped to deal with this kind of scenario, and TF produces
spurious diffs upon future runs.
This removes the default and makes origin_access_identity required when
specifying s3_origin_config.
Note that it has always been intended behaviour that if someone does not
want to use an origin access identity, that s3_origin_config should not
be specified at all. This behaviour still works, as should be evident by
the (still) passing tests.
Fixeshashicorp/terraform#7930.
Added http_version to aws_cloudfront_distribution, which allows
selection of the maximum HTTP version to use in the distribution.
Defaults to http2.
Fixeshashicorp/terraform#8730.
* provider/aws: Fix importing of EIP by IP address
EIPs are meant to be imported by their allocation id, however, importing
by their EIP *appears* to work because this API actually accepts IP
lookup, despite the documentation asking for the allocation id.
This PR does:
- update docs on how to import EIPs
- fix case if user imported by IP, to switch to using the alloc id for
the resource id
I chose not to document that looking up by IP is a method of import,
because the AWS API docs do not explicitly say that looking up by IP is
OK, so I'd rather people not do it if it's not documented to stay that
way.
Alternatively, we could parse the resource ID and reject it (remove from
state with error/warning) if it doesn't match the `eipalloc-*` format,
but I thought this was a bit better UX.
* fix issue with swapping IDs on EC2 Classic
* update docs
* update comment
* provider/aws: Wait for Spot Fleet to drain before removing from state
Ensures the spot fleet is drained before reporting successful destroy
and moving on
* remove unreachable code
* hack to sleep and test regression/leak
* fix broken english in warning
aws_alb_target_group will ForceNew resource
Fixes#8741
The modify-target-group doesn't allow changes to name, port, protocol or
vpc_id - therefore, they should all be ForceNew: true
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALBTargetGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/22 16:04:29 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSALBTargetGroup_ -timeout 120m
=== RUN TestAccAWSALBTargetGroup_basic
--- PASS: TestAccAWSALBTargetGroup_basic (50.66s)
=== RUN TestAccAWSALBTargetGroup_changeNameForceNew
--- PASS: TestAccAWSALBTargetGroup_changeNameForceNew (84.48s)
=== RUN TestAccAWSALBTargetGroup_changeProtocolForceNew
--- PASS: TestAccAWSALBTargetGroup_changeProtocolForceNew (95.89s)
=== RUN TestAccAWSALBTargetGroup_changePortForceNew
--- PASS: TestAccAWSALBTargetGroup_changePortForceNew (85.77s)
=== RUN TestAccAWSALBTargetGroup_changeVpcForceNew
--- PASS: TestAccAWSALBTargetGroup_changeVpcForceNew (85.00s)
=== RUN TestAccAWSALBTargetGroup_tags
--- PASS: TestAccAWSALBTargetGroup_tags (88.11s)
=== RUN TestAccAWSALBTargetGroup_updateHealthCheck
--- PASS: TestAccAWSALBTargetGroup_updateHealthCheck (82.15s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 572.083s
```
This commits allows for the helper function to return an error which
would bubble up from e.g. JSON parsing, etc.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
This commit also removes unnecessary code from the StateFunc function,
and reduces it so that it only uses the normalizeJsonString helper.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Added the cluster address as a separate attribute to the configuration endpoint. When using the configuration endpoint in conjunction with route 53 it was appending the cluster address with the port and invalidating the route 53 record.
* Add JSON validation to the aws_cloudwatch_event_rule resource.
This commit adds support for new helper function which is used to
normalise and validate JSON string. Also adds new validation function
to wrap around the aforementioned helper.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Re-factor validation function.
This commit changes the logic of the function so that it would check length of
the normalised JSON string over the given string, plus short-circuit early
should JSON would not be valid.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds ValidateFunc to the policy attribute so that JSON parsing
errors can be caught early. Generally, when there is a ValidateFunc set for the
attribute, one can safely assume that before any of the creation and/or update
of the existing resource would happen it would have to succeed validation. Also
adds support for new helper function which is used to normalise JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add normalizeJsonString and validateJsonString functions.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add unit test for the normalizeJsonString helper function.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Fix. Remove incrrect format string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Remove surplus type assertion.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add unit test for the validateJsonStringhelper function.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Remove surplus whitespaces.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This comment corrects a simple typo in the error message issued when the
credentials are not working and/or do not offer access to AzureRM, etc.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Fixes#3605 and adds the functionality suggested in PR #7440.
This PR is using a different appraoch that (IMHO) feels cleaner and (even more important) adds support for Windows at the same time.
When creating a CloudWatch Metric for an Application Load Balancer it is
neccessary to use the suffix of the ARN as the reference to the load
balancer. This commit exposes that as an attribute on the `aws_alb`
resource to prevent the need to use regular expression substitution to
make the reference.
Fixes#8808.
In order to satisify scenarios where a lifecycle is block is used, we
would need the AWS ALB name field to be autogenerated. WE follow the
same work as AWS ELB, we prefix it with `tl-lb-`
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALB_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/08 12:43:40 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALB_ -timeout
120m
=== RUN TestAccAWSALB_basic
--- PASS: TestAccAWSALB_basic (79.81s)
=== RUN TestAccAWSALB_generatedName
--- PASS: TestAccAWSALB_generatedName (93.81s)
=== RUN TestAccAWSALB_namePrefix
--- PASS: TestAccAWSALB_namePrefix (73.48s)
=== RUN TestAccAWSALB_tags
--- PASS: TestAccAWSALB_tags (181.32s)
=== RUN TestAccAWSALB_noSecurityGroup
--- PASS: TestAccAWSALB_noSecurityGroup (66.03s)
=== RUN TestAccAWSALB_accesslogs
--- PASS: TestAccAWSALB_accesslogs (130.82s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 625.285s
```
* fixed vpc rename bug
* Tweak the suggested fix
There was an assertion error in the fix, and after discussing we felt it was better to split the two changes to make them independant.
enhanced monitoring
Fixes#8699
When configuring enhanced monitoring, a user got the following error:
```
* aws_db_instance.db: unexpected state 'configuring-enhanced-monitoring',
wanted target '[available]'``
We have added this to the list of pending states we have when creating
and updating an RDS instance
This change adds a data source to allow declaring IAM policies, as well as a
new resource to represent an existing GCP project. The project resource may
reference an IAM policy, allowing a user to set project-wide permissions.
Fixes#8541
The Update timeout and delete timeouts were a little short. Bumped them
to 60 mins and 90 mins respectively. I have been on the receiving of the
timeout for the Delete function
Previously the provider accepted non-standard environment variables. We
now accept the standard PGHOST/PGUSER/PGPASSWORD variables that psql
uses in addition the older ones.
This fix changes acceptance tests for VPN tunnel to use the correct ports (UDP
500 and 4500). It also changes the documentation to demonstrate using these
port single ports in a `port_range` field.
Some google resources required network be refernced by resource URL (aka self_link), while others required network name.
This change allows either to be supplied.
DRY it out, and add a fix for #5552.
This is a rework of pull request #6213 submitted by @joshuaspence,
adjusted to work with the remote state data source. We also add
a deprecation warning for people using the unsupported API, and retain
the ability to refer to "_local" as well as "local" for users in a mixed
version environment.
This is a requirement for enabling CloudWatch Logging on Kinesis
Firehost
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSCloudWatchLogStream_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/02 16:19:14 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSCloudWatchLogStream_ -timeout 120m
=== RUN TestAccAWSCloudWatchLogStream_basic
--- PASS: TestAccAWSCloudWatchLogStream_basic (22.31s)
=== RUN TestAccAWSCloudWatchLogStream_disappears
--- PASS: TestAccAWSCloudWatchLogStream_disappears (21.21s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 43.538s
This adds a unit test to the test provider that verifies count.index
behaves correctly. Although not ideal this is hard to implement as a
context test without changing around the (non helper/schema)
implementation of the x_data_source.
Update the aws_vpc_peering_connection resource to allow peer_owner_id
to be omitted, defaulting to the connected AWS account ID (ie: for
VPC-to-VPC peers in the same account).
Also included is a doc cleanup and updates to the peer test in
resource_aws_route_table_test.go.
This fixeshashicorp/terraform#6396.
This replaces the previous `role_arn` with a block which looks like
this:
```
provider "aws" {
// secret key, access key etc
assume_role {
role_arn = "<Role ARN>"
session_name = "<Session Name>"
external_id = "<External ID>"
}
}
```
We also modify the configuration structure and read the values from the
block if present into those values and adjust the call to AssumeRole to
include the SessionName and ExternalID based on the values set in the
configuration block.
Finally we clean up the tests and add in missing error checks, and clean
up the error handling logic in the Auth helper functions.
delete
Fixes#6679
When we change the type of a record, it forces a new resource. We never
waited for the recordset to be in-sync after a deletion.
```
% make testacc TEST=./builtin/providers/aws
% TESTARGS='-run=TestAccAWSRoute53Record_'
% ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/03 17:55:03 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSRoute53Record_ -timeout 120m
=== RUN TestAccAWSRoute53Record_basic
--- PASS: TestAccAWSRoute53Record_basic (85.54s)
=== RUN TestAccAWSRoute53Record_basic_fqdn
--- PASS: TestAccAWSRoute53Record_basic_fqdn (101.75s)
=== RUN TestAccAWSRoute53Record_txtSupport
--- PASS: TestAccAWSRoute53Record_txtSupport (84.01s)
=== RUN TestAccAWSRoute53Record_spfSupport
--- PASS: TestAccAWSRoute53Record_spfSupport (85.08s)
=== RUN TestAccAWSRoute53Record_generatesSuffix
--- PASS: TestAccAWSRoute53Record_generatesSuffix (97.12s)
=== RUN TestAccAWSRoute53Record_wildcard
--- PASS: TestAccAWSRoute53Record_wildcard (141.08s)
=== RUN TestAccAWSRoute53Record_failover
--- PASS: TestAccAWSRoute53Record_failover (91.25s)
=== RUN TestAccAWSRoute53Record_weighted_basic
--- PASS: TestAccAWSRoute53Record_weighted_basic (89.01s)
=== RUN TestAccAWSRoute53Record_alias
--- PASS: TestAccAWSRoute53Record_alias (88.91s)
=== RUN TestAccAWSRoute53Record_s3_alias
--- PASS: TestAccAWSRoute53Record_s3_alias (103.10s)
=== RUN TestAccAWSRoute53Record_weighted_alias
--- PASS: TestAccAWSRoute53Record_weighted_alias (174.71s)
=== RUN TestAccAWSRoute53Record_geolocation_basic
--- PASS: TestAccAWSRoute53Record_geolocation_basic (89.50s)
=== RUN TestAccAWSRoute53Record_latency_basic
--- PASS: TestAccAWSRoute53Record_latency_basic (89.12s)
=== RUN TestAccAWSRoute53Record_TypeChange
--- PASS: TestAccAWSRoute53Record_TypeChange (138.09s)
=== RUN TestAccAWSRoute53Record_empty
--- PASS: TestAccAWSRoute53Record_empty (88.51s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws
1684.774s
```
availability zone
Fixes#4752
According to the AWS Documentation, when `describing-vpn-gateways`
```
AvailabilityZone -> (string)
The Availability Zone where the virtual private gateway was created, if applicable. This field may be empty or not returned.
```
Therefore, if we pass an availability zone as part of vpn gateway, then it may come back as an empty string. If we set this empty string back to state, then the next plan will look as follows:
```
-/+ aws_vpn_gateway.vpn_gateway
availability_zone: "" => "us-west-2a" (forces new resource)
tags.%: "1" => "1"
tags.Name: "vpn-us-west-2" => "vpn-us-west-2"
vpc_id: "vpc-1e9da47a" => "vpc-1e9da47a"
Plan: 1 to add, 0 to change, 1 to destroy.
```
If the availability_zone comes back from AWS as an empty string, then we should not set it to state to avoid forcing a new resource for the user
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSVpnGateway_withAvailabilityZoneSetToState'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/03 17:10:57 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSVpnGateway_withAvailabilityZoneSetToState -timeout 120m
=== RUN TestAccAWSVpnGateway_withAvailabilityZoneSetToState
--- FAIL: TestAccAWSVpnGateway_withAvailabilityZoneSetToState (36.11s)
testing.go:265: Step 0 error: Check failed: Check 2/2 error: aws_vpn_gateway.foo: Attribute 'availability_zone' expected "us-west-2a", got ""
FAIL
exit status 1
FAIL github.com/hashicorp/terraform/builtin/providers/aws 36.130s
make: *** [testacc] Error 1
[stacko@Pauls-MacBook-Pro:~/Code/go/src/github.com/hashicorp/terraform on master]
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSVpnGateway_withAvailabilityZoneSetToState' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/03 17:12:25 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSVpnGateway_withAvailabilityZoneSetToState -timeout 120m
=== RUN TestAccAWSVpnGateway_withAvailabilityZoneSetToState
--- PASS: TestAccAWSVpnGateway_withAvailabilityZoneSetToState (46.50s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 46.517s
```
* provider/aws: Refresh `aws_elasticsearch_domain` from state when
RecordNotFoundException
Fixes#3967
When an ElasticSearch domain has been deleted outside of Terraform, the
next Terraform operation would return the following:
```
* aws_elasticsearch_domain.curvelogic_es: ResourceNotFoundException:
* Domain not found: curvelogic-es
status code: 409, request id: 6e4b2371-8e1a-11e5-bd07-7741b705d65c
```
We now refresh the resource from state when it is no longer found
* Update resource_aws_elasticsearch_domain.go
This commit adds a simple validation of the target in the Health Check block in
order to reduce the number of issues related to the type, port and path values,
especially when the TCP and SSL type was used.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit increases the timeout, delay and minimum timeout values in
order to resolve a timeout potentially occurring when the VPC gateway
is being attached.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit enables terraform to utilise the assume role functionality
of sts to execute commands with different privileges than the API
keys specified.
Signed-off-by: Ian Duffy <ian@ianduffy.ie>
This commit adds a new "attachment" style resource for setting the
policy of an AWS S3 bucket. This is desirable such that the ARN of the
bucket can be referenced in an IAM Policy Document.
In addition, we now suppress diffs on the (now-computed) policy in the
S3 bucket for structurally equivalent policies, which prevents flapping
because of whitespace and map ordering changes made by the S3 endpoint.
* provider/aws: Add errcheck to Makefile, error on unchecked errors
* more exceptions
* updates for errcheck to pass
* reformat and spilt out the ignore statements
* narrow down ignores
* fix typo, only ignore Close and Write, instead of close or write
Fixes#8612
The SSL Policy is optional - if you don't add it and create a HTTPS Alb
Listener, AWS will add the policy for you. Without being computed, we
would get a diff
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALBListener_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/02 17:16:33 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALBListener_
-timeout 120m
=== RUN TestAccAWSALBListener_basic
--- PASS: TestAccAWSALBListener_basic (70.45s)
=== RUN TestAccAWSALBListener_https
--- PASS: TestAccAWSALBListener_https (63.20s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 133.667s
```
The timeout was increased to 40 minutes when creating a new cluster in https://github.com/hashicorp/terraform/pull/8052. However when creating a cluster from a snapshot the timeout is still 15 minutes. I've increased this to 40 minutes.
The librator provider is sometimes throwing errors when trying to delete
a space that is already deleted. The nightly tests shows this error:
```
Error: Error applying: 1 error(s) occurred:
* librato_space.foobar: Error deleting space: DELETE
* https://metrics-api.librato.com/v1/spaces/236303: 404
* Request errors: Not Found,.
```
The Delete func should be aware if the space cannot be deleted as it is
already deleted and not error on this usecase
```
% make testacc TEST=./builtin/providers/librato TESTARGS='-run=Test'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/01 09:24:21 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/librato -v -run=Test -timeout 120m
=== RUN TestProvider
--- PASS: TestProvider (0.00s)
=== RUN TestProvider_impl
--- PASS: TestProvider_impl (0.00s)
=== RUN TestAccLibratoAlert_Basic
--- PASS: TestAccLibratoAlert_Basic (1.52s)
=== RUN TestAccLibratoAlert_Full
--- PASS: TestAccLibratoAlert_Full (2.89s)
=== RUN TestAccLibratoAlert_Updated
--- PASS: TestAccLibratoAlert_Updated (1.76s)
=== RUN TestAccLibratoService_Basic
--- PASS: TestAccLibratoService_Basic (2.09s)
=== RUN TestAccLibratoService_Updated
--- PASS: TestAccLibratoService_Updated (2.73s)
=== RUN TestAccLibratoSpaceChart_Basic
--- PASS: TestAccLibratoSpaceChart_Basic (5.08s)
=== RUN TestAccLibratoSpaceChart_Full
--- PASS: TestAccLibratoSpaceChart_Full (13.06s)
=== RUN TestAccLibratoSpaceChart_Updated
--- PASS: TestAccLibratoSpaceChart_Updated (5.90s)
=== RUN TestAccLibratoSpace_Basic
--- PASS: TestAccLibratoSpace_Basic (4.29s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/librato 39.321s
```
This commit adds a new callback, DiffSuppressFunc, to the schema.Schema
structure. If set for a given schema, a callback to the user-supplied
function will be made for each attribute for which the default
type-based diff mechanism produces an attribute diff. Returning `true`
from the callback will suppress the diff (i.e. pretend there was no
diff), and returning false will retain it as part of the plan.
There are a number of motivating examples for this - one of which is
included as an example:
1. On SSH public keys, trailing whitespace does not matter in many
cases - and in some cases it is added by provider APIs. For
digitalocean_ssh_key resources we previously had a StateFunc that
trimmed the whitespace - we now have a DiffSuppressFunc which
verifies whether the trimmed strings are equivalent.
2. IAM policy equivalence for AWS. A good proportion of AWS issues
relate to IAM policies which have been "normalized" (used loosely)
by the IAM API endpoints. This can make the JSON strings differ
from those generated by iam_policy_document resources or template
files, even though the semantics are the same (for example,
reordering of `bucket-prefix/` and `bucket-prefix/*` in an S3
bucket policy. DiffSupressFunc can be used to test for semantic
equivalence rather than pure text equivalence, but without having to
deal with the complexity associated with a full "provider-land" diff
implementation without helper/schema.
running
Each nightly build was leaving multiple instances running. The issue is
that the IAM role we were using didn't have access to Terminate the EC2
instances
The role was missing the ec2 principle
Set default values of truly optional settings to empty strings rather
than nil, since a nil value triggers prompts for the missing values.
Also:
* Set default Consul address to `localhost:8500`
* Set default scheme to `http`
* Accept `CONSUL_HTTP_SCHEME` for consistency with other env var names
* Actively read ACL token from env vars (vs leaving it to client lib)
Should fix issue #8499
* Handle missing EFS mount target in aws_efs_mount_target.
This commit resolves issue where the EFS mount target would be already
deleted (e.g. it was deleted outside of Terraform, etc.). Also, correct
how values are begin set in the ReadFunc to avoid nil pointer dereference.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add EFS mount target DNS helper function.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add EFS mount target response helper.
This commit adds a helper which can be used to check whether the response
contains a valid and non-empty list of EFS file system mount targets.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add acceptance test to check for non-empty plan.
This commit adds a test to verify the condition where the underlying EFS mount
target would be deleted and/or disappear resulting in a new resource to be
created to replace it.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* [WIP] AWS APIGateway Custom Authorizer
* provider/aws: api_gateway_method - Add missing fields to Read+Update
* provider/aws: Make API Gateway name in test more specific
* provider/aws: APIG - Use minimal configuration in create request
terraform run
Fixes#3550
The simple fix here was to check if the Resource was new (to set the
value the first time) then check it has changed each time
I was able to see from the TF log the following:
```
Config
resource "aws_vpc" "foo" {
cidr_block = "10.10.0.0/16"
}
resource "aws_subnet" "foo" {
cidr_block = "10.10.1.0/24"
vpc_id = "${aws_vpc.foo.id}"
}
resource "aws_instance" "foo" {
ami = "ami-4fccb37f"
instance_type = "m1.small"
subnet_id = "${aws_subnet.foo.id}"
source_dest_check = false
disable_api_termination = true
}
```
No longer caused any Modifying source_dest_check entries in the LOG
* provider/aws: Add docs for Default Route Table
* add new default_route_table_id attribute, test to VPC
* stub
* add warning to docs
* rough implementation
* first test
* update test, add swap test
* fix typo
Fixes#8468
If a user wished to bump the `engine_version` of an RDS instance,
Terraform was not sending `allow_major_version_upgrade` to the API
*unless* that value also changed at the same time. This caused the
following error from RDS API:
```
* aws_db_instance.bar: Error modifying DB Instance
* tf-20160825101420910562798obb: InvalidParameterCombination: The
* AllowMajorVersionUpgrade flag must be present when upgrading to a new
* major version.
status code: 400, request id: 20e36364-6ab0-11e6-b794-51f12f4135f1
```
This change will always send the `allow_major_version_upgrade` flag to
the API when the `engine_version` changes.
This still relies on the user setting the correct value i.e. if they are
upgrading from postgres 0.4.7 -> 9.5.2 then the config will need to set
the `allow_major_version_upgrade` flag to be `true`
* provider/aws: add `aws_ssm_document` resource
* provider/aws: Changes to `aws_ssm_document` post code review
The changes are things like using d.Id rather than d.Get("name").(string)
and errwrap.Wrapf rather than fmt.Errorf
* Fix crash when reading VPC Peering Connection options.
This resolves the issue introduced in #8310.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Do not de-reference values when using Set().
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* provider/aws: Update VPC Peering connect accept/request attributes
* change from type list to type set
* provider/aws: Update VPC Peering accept/requst options, tests
* errwrap some things
This commit is changing the `volumes` block from being computed to non-computed.
This change makes the Terraform configuration the source of truth about volumes
attached to the instance and therefore is able to correctly detect when a user
detaches a volume during an update.
One thing to be aware of is that if a user attached a volume out of band of an
instance controlled by Terraform, that volume will be detached upon the next
apply. The best thing to do is add a `volume` entry in the instance's
configuration of any volumes that were attached out of band.
This commit also explicitly detaches volumes from an instance before the
instance terminates. Most Block Storage volume drivers account for this
scenario internally, but there are a few that don't. This change is to support
those that don't.
In addition, when volumes are read by the instance, volumes configured in the
Terraform configuration are the source of truth. Previously, a call was being
made to OpenStack to provide the list of attached volumes.
It also adds a few new tests and fixes existing tests for various volume
attach-related scenarios.
* provider/aws: Refresh `aws_cloudwatch_event_target` from state on
`ResourceNotFoundException`
Fixes#6928
@radeksimko FYI :)
* Update resource_aws_cloudwatch_event_target.go
* provider/aws: Change Spot Fleet Request to allow a combination of
subnet_id and availability_zone
Also added a complete set of tests that reflect all of the use cases
that Amazon document
http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-fleet-examples.html
It is important to note there that Terraform will be suggesting that
users create multiple launch configurations rather than AWS's version of
combing values into CSV based parameters. This will ensure that we are
able to enforce the correct state
Also note that `associate_public_ip_address` now defaults to `false` - a migration has been
included in this PR to migration users of this functionality. This needs
to be noted in the changelog. The last part of changing functionality
here is waiting for the state of the request to become `active`. Before
we get to this state, we cannot guarantee that Amazon have accepted the
request or it could have failed validation.
```
% make testacc TEST=./builtin/providers/aws
% TESTARGS='-run=TestAccAWSSpotFleetRequest_'
% 2 ↵
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/22 15:44:21 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSSpotFleetRequest_ -timeout 120m
=== RUN TestAccAWSSpotFleetRequest_changePriceForcesNewRequest
--- PASS: TestAccAWSSpotFleetRequest_changePriceForcesNewRequest (133.90s)
=== RUN TestAccAWSSpotFleetRequest_lowestPriceAzOrSubnetInRegion
--- PASS: TestAccAWSSpotFleetRequest_lowestPriceAzOrSubnetInRegion (76.67s)
=== RUN TestAccAWSSpotFleetRequest_lowestPriceAzInGivenList
--- PASS: TestAccAWSSpotFleetRequest_lowestPriceAzInGivenList (75.22s)
=== RUN TestAccAWSSpotFleetRequest_lowestPriceSubnetInGivenList
--- PASS: TestAccAWSSpotFleetRequest_lowestPriceSubnetInGivenList (96.95s)
=== RUN TestAccAWSSpotFleetRequest_multipleInstanceTypesInSameAz
--- PASS: TestAccAWSSpotFleetRequest_multipleInstanceTypesInSameAz (74.44s)
=== RUN TestAccAWSSpotFleetRequest_multipleInstanceTypesInSameSubnet
--- PASS: TestAccAWSSpotFleetRequest_multipleInstanceTypesInSameSubnet (97.82s)
=== RUN TestAccAWSSpotFleetRequest_overriddingSpotPrice
--- PASS: TestAccAWSSpotFleetRequest_overriddingSpotPrice (76.22s)
=== RUN TestAccAWSSpotFleetRequest_diversifiedAllocation
--- PASS: TestAccAWSSpotFleetRequest_diversifiedAllocation (79.81s)
=== RUN TestAccAWSSpotFleetRequest_withWeightedCapacity
--- PASS: TestAccAWSSpotFleetRequest_withWeightedCapacity (77.15s)
=== RUN TestAccAWSSpotFleetRequest_CannotUseEmptyKeyName
--- PASS: TestAccAWSSpotFleetRequest_CannotUseEmptyKeyName (0.00s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 788.184s
```
* Update resource_aws_spot_fleet_request.go
* provider/aws: Refresh `aws_autoscaling_policy` from state on 404
Fixes#8386
When an Autoscaling Group Or an Autoscaling Group Policy has been
deleted manually, terraform was throwing an error as follows:
```
* aws_autoscaling_policy.increase: Error retrieving scaling policies: ValidationError: Group sandbox-logs-logstash-wxhsckky3ndpzd7b3kmyontngy not found
status code: 400, request id: 56a89814-6884-11e6-b3a8-d364cf04223b
```
We now refresh from state on a ValidationError - this is a common 4xx error according to AWS documentation http://docs.aws.amazon.com/AutoScaling/latest/APIReference/CommonErrors.html
```
%make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSAutoscalingPolicy_disappears'
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSAutoscalingPolicy_disappears -timeout 120m
=== RUN TestAccAWSAutoscalingPolicy_disappears
--- PASS: TestAccAWSAutoscalingPolicy_disappears (203.61s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 203.633s
```
* Update resource_aws_autoscaling_policy.go
Replication Groups
In order to be able to restore a named snapshot as ElastiCache Cluster
or a Replication Group, the `snapshot_name` parameter was needed to be
passed. Changing the `snapshot_name` will force a new resource to be
created
```
```
resources
Fixes#8420
Adds the ability to update tags on the ALB resource as well as
supporting tags on `aws_alb_target_group`
```
ALB Tests:
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALB_' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/23 19:30:16 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALB_ -timeout 120m
=== RUN TestAccAWSALB_basic
--- PASS: TestAccAWSALB_basic (67.18s)
=== RUN TestAccAWSALB_tags
--- PASS: TestAccAWSALB_tags (99.88s)
=== RUN TestAccAWSALB_noSecurityGroup
--- PASS: TestAccAWSALB_noSecurityGroup (62.49s)
=== RUN TestAccAWSALB_accesslogs
--- PASS: TestAccAWSALB_accesslogs (126.25s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 355.835s
```
```
ALB Target Group Tests:
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALBTargetGroup_'
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/23 19:37:37 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALBTargetGroup_ -timeout 120m
=== RUN TestAccAWSALBTargetGroup_basic
--- PASS: TestAccAWSALBTargetGroup_basic (47.26s)
=== RUN TestAccAWSALBTargetGroup_tags
--- PASS: TestAccAWSALBTargetGroup_tags (81.01s)
=== RUN TestAccAWSALBTargetGroup_updateHealthCheck
--- PASS: TestAccAWSALBTargetGroup_updateHealthCheck (78.74s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 207.025s
```
Renamed the local_name_filter attribute to name_regex and made it clear in the
docs that this runs locally and could have a performance impact on a large set
of AMIs returned from AWS.
`aws_elasticache_replication_group`
Fixes#8377
Now we can output the endpoint of the primary
```
resource "aws_elasticache_replication_group" "bar" {
replication_group_id = "tf-11111"
replication_group_description = "test description"
node_type = "cache.m1.small"
number_cache_clusters = 2
port = 6379
parameter_group_name = "default.redis2.8"
apply_immediately = true
}
output "primary_endpoint_address" {
value = "${aws_elasticache_replication_group.bar.primary_endpoint_address}"
}
```
This gives us:
```
% terraform apply
...................
aws_elasticache_replication_group.bar: Creation complete
Apply complete! Resources: 1 added, 0 changed, 0 destroyed.
Outputs:
primary_endpoint_address = tf-11111.d5jx4z.ng.0001.use1.cache.amazonaws.com
```
This was the addition of a computed field only so the basic test still works as expected:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElasticacheReplicationGroup_basic' ✹
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/22 17:11:13 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSElasticacheReplicationGroup_basic -timeout 120m
=== RUN TestAccAWSElasticacheReplicationGroup_basic
--- PASS: TestAccAWSElasticacheReplicationGroup_basic (741.71s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 741.735s
```
The AWS documentation tells us the following:
```
--replication-group-id (string)
The replication group identifier. This parameter is stored as a
lowercase string.
Constraints:
A name must contain from *1 to 20* alphanumeric characters or hyphens.
The first character must be a letter.
A name cannot end with a hyphen or contain two consecutive hyphens.
```
This is not correct and is causing users errors:
```
* aws_elasticache_replication_group.bar: Error creating Elasticache
* Replication Group: InvalidParameterValue: Replication group id should
* be no more than 16 characters.
status code: 400, request id:
```
Tuning the Validation from 20 to 16 characters to avoid user issues
This commit cleans up the google_compute_firewall resource to the Go
1.5+ style of not requiring map values to declare their type if they can
be inferred.
As part of Terraform 0.7.1 it was observed in issue #8345 that the state
migration for google_compute_firewall did not appear to be running,
causing a panic when an uninitialized member was read. This commit hooks
up the state migration function (which _was_ independently unit tested
but was not actually in place).
There is currently no good test framework for this, I will address this
issue in a future RFC.
In cases where the filters provided by AWS against the name of an AMI are not
sufficient, allow adding a "local_name_filter" which is a regex that is used
to filter the AMIs returned by amazon.
API Gateway allows users to "claim" a domain name for use as a custom
hostname for deployed API endpoints, and then use this base path mapping
resource to expose a particular API deployment at a path on such a domain.
The acceptance tests use certificates from the aws_api_gateway_domain_name
tests which expire in 2026; we'll need to generate some more certificates
before we get there.
API Gateway allows users to "claim" a domain name for use as a custom
hostname for deployed API endpoints. The domain name resource just claims
the domain name; a user would then use a "base path mapping" resource
(to be implemented in a later commit) to map a particular API to a
particular path prefix on that domain.
The acceptance tests contain some TLS certificates that expire in 2026;
we'll need to generate some more certificates before we get there.
NotFound
Fixes#8375
When a Lambda or an associated Event Source Mapping has been removed via
the AWS Console, Terraform throws an error similar to the following:
```
Error refreshing state: 1 error(s) occurred:
* aws_lambda_event_source_mapping.dmp_enrichment_event_source_mapping:
* ResourceNotFoundException: The resource you requested does not exist.
status code: 404, request id: a17c641d-6868-11e6-accf-3d0ea71934fa
```
the resource should be refreshed from the state when this happens so
that subsequent plans show it needs to be recreated
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSLambdaEventSourceMapping_'
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/22 16:15:54 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSLambdaEventSourceMapping_ -timeout 120m
=== RUN TestAccAWSLambdaEventSourceMapping_basic
--- PASS: TestAccAWSLambdaEventSourceMapping_basic (120.81s)
=== RUN TestAccAWSLambdaEventSourceMapping_disappears
--- PASS: TestAccAWSLambdaEventSourceMapping_disappears (104.08s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 224.914s
```
* Add import support
* Add import tests
* Fix tags/thresholds
* The type of the object is a float but the tests were using integers, so the
tests were also adjusted to match.
* Fix Float formatting
* Provide thresholds as map[string]string to deal with formatting issues
* Adjust tests to deal with loss of trailing zeros on floats
This commit adds two optional blocks called "accepter" and "requester" to the
resource allowing for setting desired VPC Peering Connection options for VPCs
that participate in the VPC peering.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds an `arn` field to `aws_alb` and `aws_alb_target_group`
resources, in order to present a more coherant user experience to people
using resource variables in fields suffixed "arn".
* provider/archive: grant more permissions for output directories
* provider/archive: place test output in temp dir
we don't want to pollute terraform source folders…
This commit fixes#8264 by making the security_groups attribute on
aws_alb resources computed, allowing the default security group assigned
by AWS to not generate perpetual plans forcing new resources.
* provider/archive: use output_path instead of FileInfo
FileInfo.Name() returns the basename of the output path, which forces you to
never place archives in subdirectories
* provider/archive: add test for subdirectory output_path
* provider/archive: camelCase output_path variable
Setting the idle_timeout_in_minutes value of the azurerm_public_ip
resource always caused a panic.
This fixes it and adds a test to actually test that particular
attribute.
* provider/consul: first stab at adding prepared query support
* provider/consul: flatten pq resource
* provider/consul: implement updates for PQ's
* provider/consul: implement PQ delete
* provider/consul: add acceptance tests for prepared queries
* provider/consul: add template support to PQ's
* provider/consul: use substructures to express optional related components for PQs
* website: first pass at consul prepared query docs
* provider/consul: PQ's support datacenter option and store_token option
* provider/consul: remove store_token on PQ's for now
* provider/consul: allow specifying a separate stored_token
* website: update consul PQ docs
* website: add link to consul_prepared_query resource
* vendor: update github.com/hashicorp/consul/api
* provider/consul: handle 404's when reading prepared queries
* provider/consul: prepared query failover dcs is a list
* website: update consul PQ example usage
* website: re-order arguments for consul prepared queries
This commit adds a resource, acceptance tests and documentation for the
Target Groups for Application Load Balancers.
This is the second in a series of commits to fully support the new
resources necessary for Application Load Balancers.
This commit adds a resource, acceptance tests and documentation for the
new Application Load Balancer (aws_alb). We choose to use the name alb
over the package name, elbv2, in order to avoid confusion.
This is the first in a series of commits to fully support the new
resources necessary for Application Load Balancers.
* provider/aws: Allow `source_ids` in `aws_db_event_subscription` to be
Updatable
Fixes#7809
This commit adds support for `source_ids` to be updated rather than
forcing new each time. Unfortunately, it must range over the difference
in the source_ids and add and remove them 1 at a time. AWS does not
support batch updating source_ids
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBEventSubscription_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSDBEventSubscription_ -timeout 120m
=== RUN TestAccAWSDBEventSubscription_basicUpdate
--- PASS: TestAccAWSDBEventSubscription_basicUpdate (1277.87s)
=== RUN TestAccAWSDBEventSubscription_withSourceIds
--- PASS: TestAccAWSDBEventSubscription_withSourceIds (1012.96s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws
2290.844s
```
* Update resource_aws_db_event_subscription.go
* provider/aws: Adds an acceptance test that makes sure that manual deletions mean a non-empty plan
* provider/aws: Adds an acceptance test to prove that manual deletion causes a non-empty plan
* provider/aws: Add failing ETC + notifications test
* tidy up the docs some
* provider/aws: Update ElasticTranscoder to allow empty notifications, removing notifications, etc
When you need to enable monitoring for Redshift, you need to create the
correct policy in the bucket for logging. This needs to have the
Redshift Account ID for a given region. This data source provides a
handy lookup for this
http://docs.aws.amazon.com/redshift/latest/mgmt/db-auditing.html#db-auditing-enable-logging
% make testacc TEST=./builtin/providers/aws
% TESTARGS='-run=TestAccAWSRedshiftAccountId_basic' 2 ↵ ✹ ✭
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/16 14:39:35 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSRedshiftAccountId_basic -timeout 120m
=== RUN TestAccAWSRedshiftAccountId_basic
--- PASS: TestAccAWSRedshiftAccountId_basic (19.47s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 19.483s
or availability_zone
Fixes#8000
There was a hard coded panic in the code!!!
```
panic(
fmt.Sprintf(
"Must set one of:\navailability_zone %#v\nsubnet_id: %#v",
m["availability_zone"],
m["subnet_id"])
)
```
This was causing issues when we set neither an availability zone or a subnet id.
This has been removed and is now handled with an error rather than a panic.
This was what happened with the new test before the fix:
```
=== RUN TestAccAWSSpotFleetRequest_brokenLaunchSpecification
panic: Must set one of:
availability_zone ""
subnet_id: ""
goroutine 129 [running]:
panic(0x11377a0, 0xc8202abfc0)
/opt/boxen/homebrew/Cellar/go/1.6.2/libexec/src/runtime/panic.go:481 +0x3e6
github.com/hashicorp/terraform/builtin/providers/aws.hashLaunchSpecification(0x11361a0, 0xc8202e07e0, 0xc800000001)
/Users/stacko/Code/go/src/github.com/hashicorp/terraform/builtin/providers/aws/resource_aws_spot_fleet_request.go:953 +0x685
github.com/hashicorp/terraform/helper/schema.(*Set).hash(0xc82005ae00, 0x11361a0, 0xc8202e07e0, 0x0, 0x0)
/Users/stacko/Code/go/src/github.com/hashicorp/terraform/helper/schema/set.go:180 +0x40
github.com/hashicorp/terraform/helper/schema.(*Set).add(0xc82005ae00, 0x11361a0, 0xc8202e07e0, 0xc820276900, 0x0, 0x0)
```
The test then ran fine after the fix:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSSpotFleetRequest_brokenLaunchSpecification'
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/16 08:03:18 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSSpotFleetRequest_brokenLaunchSpecification -timeout 120m
=== RUN TestAccAWSSpotFleetRequest_brokenLaunchSpecification
--- PASS: TestAccAWSSpotFleetRequest_brokenLaunchSpecification (32.37s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 32.384s
```
Full test run looks as follows:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSSpotFleetRequest_' ✹
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/16 08:04:34 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSSpotFleetRequest_ -timeout 120m
=== RUN TestAccAWSSpotFleetRequest_basic
--- PASS: TestAccAWSSpotFleetRequest_basic (33.78s)
=== RUN TestAccAWSSpotFleetRequest_brokenLaunchSpecification
--- PASS: TestAccAWSSpotFleetRequest_brokenLaunchSpecification (33.59s)
=== RUN TestAccAWSSpotFleetRequest_launchConfiguration
--- PASS: TestAccAWSSpotFleetRequest_launchConfiguration (35.26s)
=== RUN TestAccAWSSpotFleetRequest_CannotUseEmptyKeyName
--- PASS: TestAccAWSSpotFleetRequest_CannotUseEmptyKeyName (0.00s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 102.648s
```
This data source provides access during configuration to the ID of the
AWS account for the connection to AWS. It is primarily useful for
interpolating into policy documents, for example when creating the
policy for an ELB or ALB access log bucket.
This will need revisiting and further testing once the work for
AssumeRole is integrated.
Fixes#7812
All of the options of `aws_db_security_group` ingress rules are
optional. Therefore, when one of them isn't set (and AWS doesn't
calculate the value), Terraform threw a panic
This commit just defensively codes around this fact. It checks to make
sure there is a value returned from the API before adding it to the map
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBSecurityGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSDBSecurityGroup_ -timeout 120m
=== RUN TestAccAWSDBSecurityGroup_basic
--- PASS: TestAccAWSDBSecurityGroup_basic (38.66s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 38.682s
```
* add dep for servicebus client from azure-sdk-for-node
* add servicebus namespaces support
* add docs for servicebus_namespaces
* add Microsoft.ServiceBus to providers list
AWS Lambda VPC config is an optional configuration and which needs to both subnet_ids and
security_group_ids to tie the lambda function to a VPC. We should make it optional if
both subnet_ids and security_group_ids are not net which would add better flexiblity in
creation of more useful modules as there are "if else" checks. Without this we are creating
duplicate modules one with VPC and one without VPC resulting in various anomalies.
The code only waited until one or more IPv4 interfaces came online.
If you only had IPv6 interfaces attached to your machine, then the
machine creation process would completely stall.
IPV6 Addresses are generally case insensitive but it is recommented to
store them as lowercase (https://tools.ietf.org/html/rfc5952#section-4.3)
When Terraform didn't store them as LowerCase, we got the following
error when using in DNS records:
```
-/+ digitalocean_record.web6
domain: "mydomain.com" => "mydomain.com"
fqdn: "web02.in.mydomain.com" => "<computed>"
name: "web02.in" => "web02.in"
port: "0" => "<computed>"
priority: "0" => "<computed>"
type: "AAAA" => "AAAA"
value: "2a03:b0c0:0003:00d0:0000:0000:0b66:6001" => "2A03:B0C0:0003:00D0:0000:0000:0B66:6001" (forces new resource)
weight: "0" => "<computed>"
```
There was no need for this to be the case. We now enforce lowercase on both state and also when responses are returned from the API
in the process
Fixes#7577
7577 discovered that sometimes setting tags at the end of the creation
model doesn't quite work for everyone. We now move that further up the
tree by calling the setTags func a second time.
The setTags func in the Update is not called immediately after creation
as we check for it not being a NewResource
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSSecurityGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSSecurityGroup_ -timeout 120m
=== RUN TestAccAWSSecurityGroup_importBasic
--- PASS: TestAccAWSSecurityGroup_importBasic (60.96s)
=== RUN TestAccAWSSecurityGroup_importSelf
--- PASS: TestAccAWSSecurityGroup_importSelf (72.72s)
=== RUN TestAccAWSSecurityGroup_basic
--- PASS: TestAccAWSSecurityGroup_basic (62.33s)
=== RUN TestAccAWSSecurityGroup_namePrefix
--- PASS: TestAccAWSSecurityGroup_namePrefix (22.12s)
=== RUN TestAccAWSSecurityGroup_self
--- PASS: TestAccAWSSecurityGroup_self (64.26s)
=== RUN TestAccAWSSecurityGroup_vpc
--- PASS: TestAccAWSSecurityGroup_vpc (58.35s)
=== RUN TestAccAWSSecurityGroup_vpcNegOneIngress
--- PASS: TestAccAWSSecurityGroup_vpcNegOneIngress (54.95s)
=== RUN TestAccAWSSecurityGroup_MultiIngress
--- PASS: TestAccAWSSecurityGroup_MultiIngress (64.81s)
=== RUN TestAccAWSSecurityGroup_Change
--- PASS: TestAccAWSSecurityGroup_Change (96.86s)
=== RUN TestAccAWSSecurityGroup_generatedName
--- PASS: TestAccAWSSecurityGroup_generatedName (60.75s)
=== RUN TestAccAWSSecurityGroup_DefaultEgress_VPC
--- PASS: TestAccAWSSecurityGroup_DefaultEgress_VPC (57.05s)
=== RUN TestAccAWSSecurityGroup_DefaultEgress_Classic
--- PASS: TestAccAWSSecurityGroup_DefaultEgress_Classic (20.94s)
=== RUN TestAccAWSSecurityGroup_drift
--- PASS: TestAccAWSSecurityGroup_drift (27.39s)
=== RUN TestAccAWSSecurityGroup_drift_complex
--- PASS: TestAccAWSSecurityGroup_drift_complex (64.62s)
=== RUN TestAccAWSSecurityGroup_tags
--- PASS: TestAccAWSSecurityGroup_tags (87.49s)
=== RUN TestAccAWSSecurityGroup_CIDRandGroups
--- PASS: TestAccAWSSecurityGroup_CIDRandGroups (71.62s)
=== RUN TestAccAWSSecurityGroup_ingressWithCidrAndSGs
--- PASS: TestAccAWSSecurityGroup_ingressWithCidrAndSGs (69.60s)
=== RUN TestAccAWSSecurityGroup_ingressWithCidrAndSGs_classic
--- PASS: TestAccAWSSecurityGroup_ingressWithCidrAndSGs_classic (25.47s)
=== RUN TestAccAWSSecurityGroup_egressWithPrefixList
--- PASS: TestAccAWSSecurityGroup_egressWithPrefixList (64.46s)
=== RUN TestAccAWSSecurityGroup_failWithDiffMismatch
--- PASS: TestAccAWSSecurityGroup_failWithDiffMismatch (60.21s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws
1166.983s
```
An S3 Bucket owner may wish to select a different underlying storage class
for an object. This commit adds an optional "storage_class" attribute to the
aws_s3_bucket_object resource so that the owner of the S3 bucket can specify
an appropriate storage class to use when creating an object.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
- adds "source_uri" field
- "source_uri" expects the URI to an existing blob that you have access
to
- it can be in a different storage account, or in the Azure File service
- the docs have been updated to reflect the change
Signed-off-by: Dan Wendorf <dwendorf@pivotal.io>
* Overriding S3 endpoint - Enable specifying your own
S3 api endpoint to override the default one, under
endpoints.
* Force S3 path style - Expose this option from the aws-sdk-go
configuration to the provider.
This commit fixes an issue where CORS rules would not be read and thus refreshed
correctly should there be a change introduced externally e.g. CORS configuration
was edited outside of Terraform.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* providers/google: Add google_compute_image resource
This change introduces the google_compute_image resource, which allows
Terraform users to create a bootable VM image from a raw disk tarball
stored in Google Cloud Storage. The google_compute_image resource
may be referenced as a boot image for a google_compute_instance.
* providers/google: Support family property in google_compute_image
* provider/google: Idiomatic checking for presence of config val
* vendor: Update Google client libraries
* #7013 add tls config support to consul provider
* #7013 add acceptance tests
* #7013 use GFM tables
* #7013 require one of {CONSUL_ADDRESS,CONSUL_HTTP_ADDR} when running consul acc tests
* provider/aws: Re-implement api gateway parameter handling
this PR cleans up some left overs from PR #4295, namely the parameter handling.
now that GH-2143 is finally closed this PR does away with the ugly
`request_parameters_in_json` and `response_parameters_in_json` hack.
* Add deprecation message and conflictsWith settings
following @radeksimko s advice, keeping the old code around with a deprecation
warning.
this should be cleaned up in a few releases
* provider/aws: fix missing append operation
* provider/aws: mark old parameters clearly as deprecated
* provider/aws work around #8104
following @radeksimko s lead
* provider/aws fix cnp error
- we could've had ConflictsWith between affected fields, but that would make it fail even if skip_requesting_account_id=false and ConflictsWhen is not a thing (yet)
* Skip IAM/STS validation and metadata check
* Skip IAM/STS identity validation - For environments or other api
implementations where there are no IAM/STS endpoints available, this
option lets you opt out from that provider initialization step.
* Skip metdata api check - For environments in which you know ahead of
time there isn't going to be a metadta api endpoint, this option lets
you opt out from that check to save time.
* Allow iam/sts initialization even if skipping account/cred validation
(#7874)
* Split out skip of IAM validation into credentials and account id
(#7874)
An S3 Bucket owner may wish to set a canned ACL (as opposite to explicitly set
grantees, etc.) for an object. This commit adds an optional "acl" attribute to
the aws_s3_bucket_object resource so that the owner of the S3 bucket can
specify an appropriate pre-defined ACL to use when creating an object.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Various string slices are sorted and truncated to strings if they
only contain one element.
* Sids are now included if they are empty.
This is to ensure what is sent to AWS matches what comes back, to
prevent recurring diffs even when the policy has changed.
Any S3 Bucket owner may wish to share data but not incur charges associated
with others accessing the data. This commit adds an optional "request_payer"
attribute to the aws_s3_bucket resource so that the owner of the S3 bucket can
specify who should bear the cost of Amazon S3 data transfer.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Version 1.3.1 deprecates use of `session.New()` in favour of
`session.NewSession()`, which also returns an error. This commit updates
the various call sites previously making use of `session.New()`.
or us-gov
Fixes#7969
`acceleration_status` is not available in China or US-Gov data centers.
Even querying for this will give the following:
```
Error refreshing state: 1 error(s) occurred:
2016/08/04 13:58:52 [DEBUG] plugin: waiting for all plugin processes to
complete...
* aws_s3_bucket.registry_cn: UnsupportedArgument: The request contained
* an unsupported argument.
status code: 400, request id: F74BA6AA0985B103
```
We are going to stop any Read calls for acceleration status from these
data centers
```
% make testacc TEST=./builtin/providers/aws
% TESTARGS='-run=TestAccAWSS3Bucket_' ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSS3Bucket_
-timeout 120m
=== RUN TestAccAWSS3Bucket_Notification
--- PASS: TestAccAWSS3Bucket_Notification (409.46s)
=== RUN TestAccAWSS3Bucket_NotificationWithoutFilter
--- PASS: TestAccAWSS3Bucket_NotificationWithoutFilter (166.84s)
=== RUN TestAccAWSS3Bucket_basic
--- PASS: TestAccAWSS3Bucket_basic (133.48s)
=== RUN TestAccAWSS3Bucket_acceleration
--- PASS: TestAccAWSS3Bucket_acceleration (282.06s)
=== RUN TestAccAWSS3Bucket_Policy
--- PASS: TestAccAWSS3Bucket_Policy (332.14s)
=== RUN TestAccAWSS3Bucket_UpdateAcl
--- PASS: TestAccAWSS3Bucket_UpdateAcl (225.96s)
=== RUN TestAccAWSS3Bucket_Website_Simple
--- PASS: TestAccAWSS3Bucket_Website_Simple (358.15s)
=== RUN TestAccAWSS3Bucket_WebsiteRedirect
--- PASS: TestAccAWSS3Bucket_WebsiteRedirect (380.38s)
=== RUN TestAccAWSS3Bucket_WebsiteRoutingRules
--- PASS: TestAccAWSS3Bucket_WebsiteRoutingRules (258.29s)
=== RUN TestAccAWSS3Bucket_shouldFailNotFound
--- PASS: TestAccAWSS3Bucket_shouldFailNotFound (92.24s)
=== RUN TestAccAWSS3Bucket_Versioning
--- PASS: TestAccAWSS3Bucket_Versioning (654.19s)
=== RUN TestAccAWSS3Bucket_Cors
--- PASS: TestAccAWSS3Bucket_Cors (143.58s)
=== RUN TestAccAWSS3Bucket_Logging
--- PASS: TestAccAWSS3Bucket_Logging (249.79s)
=== RUN TestAccAWSS3Bucket_Lifecycle
--- PASS: TestAccAWSS3Bucket_Lifecycle (259.87s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws
3946.464s
```
thanks to @kwilczynski and @radeksimko for the research on how to handle the generic
errors here
Running these over a 4G tethering connection has been painful :)
* provider/google: Support static private IP addresses
The private address of an instance's network interface may now be specified.
If no value is provided, an address will be chosen by Google Compute Engine
and that value will be read into Terraform state.
* docs: GCE private static IP address information
Add firehose elasticsearch configuration documentation
Adding CRUD for elastic search as firehose destination
Updated the firehose stream documentation to add elastic search as destination example.
Adding testing for es as firehose destination
Update the test case for es
ARNs used to be build using the iamconn.GetUser func call. This wouldn't
work on some scenarios and was changed so that we can expose the
AccountId and Region via meta
This commit just changes the build ARN funcs to use this new way of
doing things
* provider/aws: Fix issue updating ElasticBeanstalk Environment Settings
Fixes the logic that updated settings for Elastic Beanstalk Environments.
Because the update is done in the same API call, we need to split removals /
additions.
Fixes#6890
* add acc test that fails on master
the `aws_iam_group_membership` resource
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSGroupMembership_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSGroupMembership_ -timeout 120m
=== RUN TestAccAWSGroupMembership_basic
--- PASS: TestAccAWSGroupMembership_basic (74.14s)
=== RUN TestAccAWSGroupMembership_paginatedUserList
--- PASS: TestAccAWSGroupMembership_paginatedUserList (273.29s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 347.447s
```
The S3 API has two parameters that can be passed to it (HostName
and Protocol) for the RedirectAllRequestsTo functionality.
HostName is somewhat poorly named because it need not be only a
hostname (it can contain a path too.)
The terraform code for this was treating the API as the parameter
name suggests and was truncating out any paths that were passed.
This commit adds VPN Gateway attachment resource, and also an initial tests and
documentation stubs.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Fixes#7996
The Create func was using the timeout that we were passing to the
resource. Update func was not.
```
% make testacc TEST=./builtin/providers/aws
% TESTARGS='-run=TestAccAWSCloudFormation_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSCloudFormation_ -timeout 120m
=== RUN TestAccAWSCloudFormation_basic
--- PASS: TestAccAWSCloudFormation_basic (120.61s)
=== RUN TestAccAWSCloudFormation_defaultParams
--- PASS: TestAccAWSCloudFormation_defaultParams (121.40s)
=== RUN TestAccAWSCloudFormation_allAttributes
--- PASS: TestAccAWSCloudFormation_allAttributes (263.29s)
=== RUN TestAccAWSCloudFormation_withParams
--- PASS: TestAccAWSCloudFormation_withParams (205.52s)
=== RUN TestAccAWSCloudFormation_withUrl_withParams
--- PASS: TestAccAWSCloudFormation_withUrl_withParams (402.71s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws
1113.552s
```
`elasticsearch_version` 2.3
Fixes#7836
This will allow ElasticSearch domains to be deployed with version 2.3 of
ElasticSearch
The other slight modifications are to stop dereferencing values before
passing to d.Set in the Read func. It is safer to pass the pointer to
d.Set and allow that to dereference if there is a value
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElasticSearchDomain_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSElasticSearchDomain_ -timeout 120m
=== RUN TestAccAWSElasticSearchDomain_basic
--- PASS: TestAccAWSElasticSearchDomain_basic (1611.74s)
=== RUN TestAccAWSElasticSearchDomain_v23
--- PASS: TestAccAWSElasticSearchDomain_v23 (1898.80s)
=== RUN TestAccAWSElasticSearchDomain_complex
--- PASS: TestAccAWSElasticSearchDomain_complex (1802.44s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 5313.006s
```
Update resource_aws_elasticsearch_domain.go
* Improve influxdb provider
- reduce public funcs. We should not make things public that don't need to be public
- improve tests by verifying remote state
- add influxdb_user resource
allows you to manage influxdb users:
```
resource "influxdb_user" "admin" {
name = "administrator"
password = "super-secret"
admin = true
}
```
and also database specific grants:
```
resource "influxdb_user" "ro" {
name = "read-only"
password = "read-only"
grant {
database = "a"
privilege = "read"
}
}
```
* Grant/ revoke admin access properly
* Add continuous_query resource
see
https://docs.influxdata.com/influxdb/v0.13/query_language/continuous_queries/
for the details about continuous queries:
```
resource "influxdb_database" "test" {
name = "terraform-test"
}
resource "influxdb_continuous_query" "minnie" {
name = "minnie"
database = "${influxdb_database.test.name}"
query = "SELECT min(mouse) INTO min_mouse FROM zoo GROUP BY time(30m)"
}
```
This commit resolves the issue where lack of snapshot ID in the device mapping
section of the API response to DescribeImagesResponse would cause Terraform to
crash due to a nil pointer dereference. Usually, the snapshot ID is included,
but in some unique cases (e.g. ECS-enabled AMI from Amazon available on the
Market Place) a volume that is attached might not have it.
The API documentation does not clearly define whether the snapshot ID either
should be or must be included for any volume in the response.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit allows an operator to specify the e-mail address of a service
account to use with a Google Compute Engine instance. If no service account
e-mail is provided, the default service account is used.
Closes#7985
* Add state filter to aws_availability_zones data source.
This commit adds an ability to filter Availability Zones based on state, where
by default it would only list available zones.
Be advised that this does not always works reliably for an older accounts which
have been created in the pre-VPC era of EC2. These accounts tends to retrieve
availability zones that are not VPC-enabled, thus creation of a custom subnet
within such Availability Zone would result in a failure.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Update documentation for aws_availability_zones data source.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Do not filter on state by default.
This commit makes the state filter applicable only when set.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
- adds "source", "parallelism", and "attempts" fields
- supports both block and page type blobs
- uploads run concurrently
- page blobs skip empty byte ranges to efficiently upload large sparse
files
- "source" expects an absolute path to a file on the local file
system
- "parallelism" expects an integer value that indicates the number of
workers per CPU core to run for concurrent uploads
- "attempts" expects an integer value for number of attempts to make per
page or block when uploading
Signed-off-by: Raina Masand <rmasand@pivotal.io>
* Enables copy of files within vSphere
* Can copy files between different datacenters and datastores
* Update can move uploaded or copied files between datacenters and datastores
* Preserves original functionality for backward compatibility
Sean Chittenden