If we get a diagnostic message that references a source range, and if the
source code for the referenced file is available, we'll show a snippet of
the source code with the source range highlighted.
At the moment we have no cache of source code, so in practice this
codepath can never be visited. Callers to format.Diagnostic will be
gradually updated in subsequent commits.
In some cases this is needed to keep the UX clean and to make sure any remote exit codes are passed through to the local process.
The most obvious example for this is when using the "remote" backend. This backend runs Terraform remotely and stream the output back to the local terminal.
When an error occurs during the remote execution, all the needed error information will already be in the streamed output. So if we then return an error ourselves, users will get the same errors twice.
By allowing the backend to specify the correct exit code, the UX remains the same while preserving the correct exit codes.
Certain backends (currently only the `remote` backend) do not support using both the default and named workspaces at the same time.
To make the migration easier for users that currently use both types of workspaces, this commit adds logic to ask the user for a new workspace name during the migration process.
This commit fixes a bug that (in the case of the `local` backend) would only check if the selected workspace had a state when deciding to preform a migration.
When the selected workspace didn’t have a state (but other existing workspace(s) did), the migration would not be preformed and the other workspaces would be ignored.
By adding this method you now only have to pass a `*disco.Disco` object around in order to do discovery and use any configured credentials for the discovered hosts.
Of course you can also still pass around both a `*disco.Disco` and a `auth.CredentialsSource` object if there is a need or a reason for that!
- Fixes#11696
- This changes makes `terraform output -json` return '{}' instead of
throwing an error about "no outputs defined"
- If `-json` is not set, the user will receive an error as before
- This UX helps new users to understand how outputs are used
- Allows for easier automation of TF CLI as an empty set of outputs is
usually acceptable, but any other error from `output` would be
re-raised to the user.
Rather than try to modify all the hundreds of calls to the temp helper
functions, and cleanup the temp files at every call site, have all tests
work within a single temp directory that is removed at the end of
TestMain.
The state locking improvements for the regular command had the side
effect of locking the state in the console, import, graph and push
commands. Those commands had been updated to get a state via the
Backend.Context method, which locks the state whenever possible, and now
need to call Unlock directly.
Add Unlock calls to all commands that call Context directly.
Use the new StateLocker field to provide a wrapper for locking the state
during terraform.Context creation in the commands that directly
manipulate the state.
Simplify the use of clistate.Lock by creating a clistate.Locker
instance, which stores the context of locking a state, to allow unlock
to be called without knowledge of how the state was locked.
This alows the backend code to bring the needed UI methods to the point
where the state is locked, and still unlock the state from an outer
scope.
Provide a NoopLocker as well, so that callers can always call Unlock
without verifying the status of the lock.
Add the StateLocker field to the backend.Operation, so that the state
lock can be carried between the different function scopes of the backend
code. This will allow the backend context to lock the state before it's
read, while allowing the different operations to unlock the state when
they complete.
Use the new StateLocker field to provide a wrapper for locking the state
during terraform.Context creation in the commands that directly
manipulate the state.
Simplify the use of clistate.Lock by creating a clistate.Locker
instance, which stores the context of locking a state, to allow unlock
to be called without knowledge of how the state was locked.
This alows the backend code to bring the needed UI methods to the point
where the state is locked, and still unlock the state from an outer
scope.
The error was being silently dropped before.
There is an interpolation error, because the plan is canceled before
some of the resources can be evaluated. There might be a better way to
handle this in the walk cancellation, but the behavior has not changed.
Make the plan and apply shutdown match implementation-wise
If the user wishes to interrupt the running operation, only the first
interrupt was communicated to the operation by canceling the provided
context. A second interrupt would start the shutdown process, but not
communicate this to the running operation. This order of event could
cause partial writes of state.
What would happen is that once the command returns, the plugin system
would stop the provider processes. Once the provider processes dies, all
pending Eval operations would return return with an error, and quickly
cause the operation to complete. Since the backend code didn't know that
the process was shutting down imminently, it would continue by
attempting to write out the last known state. Under the right
conditions, the process would exit part way through the writing of the
state file.
Add Stop and Cancel CancelFuncs to the RunningOperation, to allow it to
easily differentiate between the two signals. The backend will then be
able to detect a shutdown and abort more gracefully.
In order to ensure that the backend is not in the process of writing the
state out, the command will always attempt to wait for the process to
complete after cancellation.
Since an early version of Terraform, the `destroy` command has always
had the `-force` flag to allow an auto approval of the interactive
prompt. 0.11 introduced `-auto-approve` as default to `false` when using
the `apply` command.
The `-auto-approve` flag was introduced to reduce ambiguity of it's
function, but the `-force` flag was never updated for a destroy.
People often use wrappers when automating commands in Terraform, and the
inconsistency between `apply` and `destroy` means that additional logic
must be added to the wrappers to do similar functions. Both commands are
more or less able to run with similar syntax, and also heavily share
their code.
This commit updates the command in `destroy` to use the `-auto-approve` flag
making working with the Terraform CLI a more consistent experience.
We leave in `-force` in `destroy` for the time-being and flag it as
deprecated to ensure a safe switchover period.
The plan shutdown test often fail on slow CI hosts, becase the plan
completes befor the main thread can cancel it. Since attempting to make
the MockProvider concurrent proved too invasive for now, just slow the
test down a bit to help ensure Stop gets called.
To avoid breaking automation where plugin-path was assumed to be set
permanently, only remove the plugin-path record if it was explicitly set
to and empty string.
The existing prompts were worded as if backend configurations were
named, but they can only really be referenced by their type. Change the
wording to reference them as type "X backend". When migrating state,
refer to the backends as the "previously configured" and "newly
configured", since they will often have the same type.
Rather than relying on interrupting Diff, just make sure Stop was called
on the provider. The DiffFn is protected by a mutex in the mock
provider, which means that the tests can't rely on concurent calls to
diff working.
There's no point in trying to track these, they're lost after each test.
Kill them after a short delay so we don't have goroutines from every single
command test to wade through if we have a stack dump.
Only check for input twice in the meta.confirm method. This prevents an
errant newline from aborting the run while allowing Terraform to exit if
there is no input available. We don't just check for a tty, since we
still rely on being able to pipe input in for testing.
Remove the redundant confirmation loops in the migration code, and only
use the confirm method.
Make sure the init inputFalse test actually errors from missing input,
since skipping input will still fail later during provider
initialization. We need to make sure there are two different states that
aren't a noop for migration, and reset the command struct for each run.
Also verify that we don't go into an infinite loop if there is no input.
The duplicate prompts can be confusing when the user confirms that a
migration should happen and we immediately prompt a second time for the
same thing with slightly different wording. The extra hand-holding that
this provides for legacy remote states is less critical now, since it's
been 2 major release cycles since those were removed.
The init command needs to parse the state to resolve providers, but
changes to the state format can cause that to fail with difficult to
understand errors. Check the terraform version during init and provide
the same error that would be returned by plan or apply.
If users run "terraform import" in a directory with no Terraform
configuration files, it's likely that they've made a mistake either by
being in the wrong directory or forgetting to use the -config option
on the command line.
To help users find their mistake in this case, we'll now produce a
specialized error message for this situation:
Error: No Terraform configuration files
The directory /home/user/example does not contain any Terraform
configuration files (.tf or .tf.json). To specify a different
configuration directory, use the -config="..." command line option.
While here, this also converts some of the other existing messages to
diagnostics so that we can show any configuration warnings along with
the error message, and move towards the new standard error presentation.
Previously we required callers to separately call .Validate on the root
module to determine if there were any value errors, but we did that
inconsistently and would thus see crashes in some cases where later code
would try to use invalid configuration as if it were valid.
Now we run .Validate automatically after config loading, returning the
resulting diagnostics. Since we return a diagnostics here, it's possible
to return both warnings and errors.
We return the loaded module even if it's invalid, so callers are free to
ignore returned errors and try to work with the config anyway, though they
will need to be defensive against invalid configuration themselves in
that case.
As a result of this, all of the commands that load configuration now need
to use diagnostic printing to signal errors. For the moment this just
allows us to return potentially-multiple config errors/warnings in full
fidelity, but also sets us up for later when more subsystems are able
to produce rich diagnostics so we can show them all together.
Finally, this commit also removes some stale, commented-out code for the
"legacy" (pre-0.8) graph implementation, which has not been available
for some time.
Now that the local backend can be cancelled during plan and refresh, we
don't really need the testShutdownHook. Simplify the tests by just
checking for Stop being called on the provider.
Add a shutdown hook to verify that a context has been correctly
cancelled, so we can remove the sleep and stop guessing.
Add a plan version of the shutdown test as well.
There was no cancellation context for a plan, so it would always have to
run to completion as SIGINT was being swallowed.
Move the shutdown channel to the command Meta since it's used in
multiple commands.
Validation is the best time to return detailed diagnostics
to the user since we're much more likely to have source
location information, etc than we are in later operations.
This change doesn't actually add any detail to the messages
yet, but it changes the interface so that we can gradually
introduce more detailed diagnostics over time.
While here there are some minor adjustments to some of the
messages to improve their consistency with terminology we
use elsewhere.
As part of the 0.10 core/provider split we moved this provider, along with
all the others, out into its own repository.
In retrospect, the "terraform" provider doesn't really make sense to be
separated since it's just a thin wrapper around some core code anyway,
and so re-integrating it into core avoids the confusion that results when
Terraform Core and the terraform provider have inconsistent versions of
the backend code and dependencies.
There is no good reason to use a different version of the backend code
in the provider than in core, so this new "internal provider" mechanism
is stricter than the old one: it's not possible to use an external build
of this provider at all, and version constraints for it are rejected as
a result.
This provider is also run in-process rather than in a child process, since
again it's just a very thin wrapper around code that's already running
in Terraform core anyway, and so the process barrier between the two does
not create enough advantage to warrant the additional complexity.
Change "Downloading" to 'Initializing" to match the provider loading
dialog.
List each module being loaded.
If a regisry module is being downloaded, list the registry host, and the
version discovered.
Show the source string from the config that is being fetched, rather
than the go-getter url. The full source can be found in the logs for
debugging.
Add much more extensive logging
This allows the user to customize the location where Terraform stores
the files normally placed in the ".terraform" subdirectory, if e.g. the
current working directory is not writable.
In the 0.10 release we added an opt-in mode where Terraform would prompt
interactively for confirmation during apply. We made this opt-in to give
those who wrap Terraform in automation some time to update their scripts
to explicitly opt out of this behavior where appropriate.
Here we switch the default so that a "terraform apply" with no arguments
will -- if it computes a non-empty diff -- display the diff and wait for
the user to type "yes" in similar vein to the "terraform destroy" command.
This makes the commonly-used "terraform apply" a safe workflow for
interactive use, so "terraform plan" is now mainly for use in automation
where a separate planning step is used. The apply command remains
non-interactive when given an explicit plan file.
The previous behavior -- though not recommended -- can be obtained by
explicitly setting the -auto-approve option on the apply command line,
and indeed that is how all of the tests are updated here so that they can
continue to run non-interactively.
Update the command package to use the new module storage. Move the old
command output strings into the module storage itself. This could be
moved back later either by using ui callbacks, or designing a module
storage interface once we know what the final requirements will look
like.
We encourage users to share the "terraform version" output as part of
filing an issue, but previously it only printed the core Terraform version
and this left provider maintainers with no information about which
_provider_ version an issue relates to.
Here we make a best effort to show versions for providers, though we will
omit some or all of them if either "terraform init" hasn't been run (and
so no providers were selected yet) or if there are other inconsistencies
that would cause Terraform to object on startup and require a re-run of
"terraform init".
Two different errors here caused this test to pass even though it was
incorrect: the wanted version string was incorrect, but the test for it
was also inverted, and so together this made the test pass even though
it was actually not testing the output at all.
Update all references to the version values to use the new package.
The VersionString function was left in the terraform package
specifically for the aws provider, which is vendored. We can remove that
last call once the provider is updated.
The command package is the main place we need access to these, so that
we can use them during init (to install packages, for example) and so that
we can use them to configure remote backends.
For the moment we're just providing an empty credentials object, which
will start to include both statically-configured and
helper-program-provided credentials sources in subsequent commits.
This uses the new diagnostics printer for config-related errors in the
main five commands that deal with config.
The immediate motivation for this is to allow HCL2-produced diagnostics
to be printed out in their full fidelity, though it also slightly changes
the presentation of other errors so that they are not presented in all
red text, which can be hard to read on some terminals.
This new method showDiagnostics takes any value that would be accepted by
tfdiags.Append and renders it to the UI.
This is intended to encourage consistent handling of the different kinds
of errors and diagnostics that can be produced, and allow richer error
objects like the HCL2 diagnostics to be easily unwrapped and shown in
their full-fidelity.
Previously we were using fmt.Sprintf and thus forcing the stringification
of the wrapped error.
Using errwrap allows us to unpack the original error at the top of the
stack, which is useful when the wrapped error is really a hcl.Diagnostics
containing potentially-multiple errors and possibly warnings.
This is a tough one to unit tests because the behavior is tangled up in
the code that hits releases.hashicorp.com, so we'll add this e2etest as
some extra insurance that this works end-to-end.
Since we now have a guide that recommends some specific ways to run
Terraform in automation, we can mimic those suggestions in an e2e test and
thus ensure they keep working.
Here we test the three different approaches suggested in the guide:
- init, plan, apply (main case)
- init, apply (e.g. for deploying to a QA/staging environment)
- init, plan (e.g. for verifying a pull request)
Martin Atkins