Adds `GetOkRaw` as a schema function. This should only be used to verify
boolean attributes are either set or not set, regardless of their zero
value for their type. There are a few small use cases outside of the boolean
type where this will be helpful as well.
Overall, this shouldn't detract from the zero-value checks that `GetOK()`
currently has, and should only be used when absolutely needed. However,
there are enough use-cases for this addition without checking for the
zero-value of the type, that this is needed.
Primary use case is for a boolean attribute that is `Optional` and `Computed`,
without a default value. There's currently no way to verify that the boolean
attribute was explicitly set to the zero-value literal with the current
`GetOk()` function. This new function allows for that check, keeping the
`Computed` check for the returned `exists` boolean.
```
$ make test TEST=./helper/schema TESTARGS="-run=TestResourceDataGetOkRaw"
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/08/02 11:17:32 Generated command/internal_plugin_list.go
go test -i ./helper/schema || exit 1
echo ./helper/schema | \
xargs -t -n4 go test -run=TestResourceDataGetOkRaw -timeout=60s -parallel=4
go test -run=TestResourceDataGetOkRaw -timeout=60s -parallel=4 ./helper/schema
ok github.com/hashicorp/terraform/helper/schema 0.005s
```
The field reader code path is extremely inefficient, but refactoring
it all is much to invasive a change at the moment.
Have DiffFieldReader internally cache results for ReadField.
Provider import tests previously didn't have to supply a config, but
terraform now requires the provider to be declared for discovery.
testProviderConfig returns a stub config with provider blocks based
on the TestCase Providers. This allows basic import tests in providers
to remain unchanged.
The Close methods on shadow.Values require pointer receivers because
they contain a sync.Mutex, but that value was being copied through
Value.Interface by the closeWalker. Because reflectwalk passes the
struct fields to the StructField method as they are defined in the
struct, and they may have been read as a value, we can't immediately
call Interface() to check the method set without possibly copying the
internal mutex values. Use the Implements method to first check if we
need to call Interface, and if it's not, then we can check if the value
is addressable.
Because of this use of reflection, we can't vet for the copying of these
locks. The minimal amount of code in the Close method left us only with
a race detected within the mutex itself, which leads to a stacktrace
pointing to the runtime rather than our code.
It turns out that `d.GetOk` also returns `false` when the user _did_ actually supply a value for it in the config, but the value itself needs to be evaluated before it can be used.
So instead of passing a `ResourceData` we now pass a `ResourceConfig`
which makes much more sense for doing the validation anyway.
The timestamp prefix added in #8249 was removed in #10152 to ensure that
returned IDs really are properly ordered. However, this meant that IDs were no
longer ordered over multiple invocations of terraform, which was the main
motivation for adding the timestamp in the first place. This commit does a
hybrid: timestamp-plus-incrementing-counter instead of just incrementing counter
or timestamp-plus-random.
Rather than providing an already-resolved map of plugins to core, we now
provide a "provider resolver" which knows how to resolve a set of provider
dependencies, to be determined later, and produce that map.
This requires the context to be instantiated in a different way, so this
very noisy diff is a mostly-mechanical update of all of the existing
places where contexts get created for testing, using some adapted versions
of the pre-existing utilities for passing in mock providers.
Previously having a config was mutually exclusive with running an import,
but we need to provide a config so that the provider is declared, or else
we can't actually complete the import in the future world where providers
are installed dynamically based on their declarations.
* provider/aws: Add Sweeper setup, Sweepers for DB Option Group, Key Pair
* provider/google: Add sweeper for any leaked databases
* more recursion and added LC sweeper, to test out the Dependency path
* implement a dependency example
* implement sweep-run flag to filter runs
* stub a test for TestMain
* test for multiple -sweep-run list
GH-14784 allowed nested structures to be validate, rather than relying
on the raw value. However this still returns the same validation error
if the structures contain a computed value, since Get will return the
raw string in that case.
This simply skips the validation in the IsComputed case, since there's
nothing that can be checked.
When interpreting a nested object, we were validating against the "raw"
value, and not the interpolated value, causing incorrect errors.
This affects structures such as:
```tf
tags = "${list(map("foo", "bar"))}"
```
Prior to this, a complaint about "expected object, got string" since the
raw value is obviously a string, when the interpolated value is the
correct shape.
The tests did pass, but that was because they only tested part of the changes. By using the `schema.TestResourceDataRaw` function the schema and config are better tested and so they pointed out a problem with the schema of the Chef provisioner.
The `Elem` fields did not have a `*schema.Schema` but a `schema.Schema` and in an `Elem` schema only the `Type` field may (and must) be set. Any other fields like `Optional` are not allowed here.
Next to fixing that problem I also did a little refactoring and cleaning up. Mainly making the `ProvisionerS` private (`provisioner`) and removing the deprecated fields.
1. Migrate `chef` provisioner to `schema.Provisioner`:
* `chef.Provisioner` structure was renamed to `ProvisionerS`and now it's decoded from `schema.ResourceData` instead of `terraform.ResourceConfig` using simple copy-paste-based solution;
* Added simple schema without any validation yet.
2. Support `ValidateFunc` validate function : implemented in `file` and `chef` provisioners.
Besides the support for DO certificates themselves, this commit also
includes:
1) A new `RandTLSCert` function that generates a valid, self-signed TLS
certificate to be used in the test
2) A fix for the PEM encoding of the private key generated in
`RandSSHKeyPair`: the PEM was always empty
If a schema.TypeList had a Schema with ForceNew, and if that list was
NewComputed, the diff would not have RequiresNew set. This causes apply
to fail when the diffs didn't match because of the change to
RequiresNew.
Set the RequiresNew field on the list's ResourceAttrDiff based on the
Schema value.
stringer has changed the boilerplate it generates in a recent version.
We'd previously updated to the new format but accientally rolled back
to the old while merging a long-running feature branch.
This restores us back to the new format again.
A couple tests require lowering the grace period to keep the test from
taking the full 30s timeout.
The Retry_hang test also needed to be removed from the Parallel group,
becuase it modifies the global refreshGracePeriod variable.
Refresh calls may have side effects that need to be recorded if it
succeeds, especially common when when WaitForState is called from
resource.Retry.
If the WaitForState timeout is reached and there is a Refresh call
in-flight, wait up to refreshGracePeriod (set to 30s) for it to
complete.
This test unfortunately relies on the timing of the loops in
WaitForState, and the text of the error message. Adjust the timing so
the timeout isn't an even multiple of the poll interval, and make sure
we reach a minimum number of retries.
Make sure that we can cancel the WaitForState refresh loop when reaching
a timeout, otherwise it may run indefinitely. There's no need to try and
store and read the Result concurrently, just pass the value over a
channel.
* Revert #11245, #11321, #11498 and #11757
These PR’s are all related to issue #11170 for which I would like to propose a different solution then the one currently implemented.
* A different approach to solve #11170
This approach has (IMHO) a few advantages with regards to the solution currently implemented. I will elaborate on this in the PR.
* provider/aws: Add failing test for EMR Bootstrap Actions
* aws_emr_cluster: Fix bootstrap action parameter ordering
* provider/aws: Fix EMR Bootstrap arguments
* provider/aws: Args needs to be ForceNew, because we can't update them
Discussion in #9512 revealed that some of the comments here were
inaccurate and that the comments here did not paint a complete enough
picture of the behavior and expectations of Default and DefaultFunc.
This is a comments-only change that aims to clarify the situation and
call attention to the fact that the defaults only affect the handling of
the configuration and that changes to defaults may require migration of
existing resource states.
This closes#9512.
Adds the `ImportStateIdPrefix` field for import acceptance tests. There are (albeit fairly rare) import cases where a resource needs to be imported with a combination of the resource's ID and a known string prefix. This allows the developer to specify the known prefix, and omit the `ImportStateId` field.
```
$ make test TEST=./helper/resource TESTARGS="-run=TestTest_importStateIdPrefix"
==> Checking that code complies with gofmt requirements...
==> Checking AWS provider for unchecked errors...
==> NOTE: at this time we only look for uncheck errors in the AWS package
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/30 18:08:36 Generated command/internal_plugin_list.go
go test -i ./helper/resource || exit 1
echo ./helper/resource | \
xargs -t -n4 go test -run=TestTest_importStateIdPrefix -timeout=60s -parallel=4
go test -run=TestTest_importStateIdPrefix -timeout=60s -parallel=4 ./helper/resource
ok github.com/hashicorp/terraform/helper/resource 0.025s
```
golang/tools commit 23ca8a263 changed the format of the leading comment
to comply with some new standards discussed here:
https://golang.org/issue/13560
This is the result of running generate with the latest version of
stringer. Everyone working on Terraform will need to update stringer
after this is merged, to avoid reverting this:
go get -u golang.org/x/tools/cmd/stringer
Sometimes when waiting on a target state, the set of valid states
through which a value will transition is unknown. This commit adds
support for an empty Pending slice and will treat any states that are not
the target as valid provided the timeouts are not exceeded.
This commit adds a new RandIntRange function to the helper/acctest
package for generating random integers in a given range. This is useful
when randomizing test spaces with a constrained range (e.g. 0-4095).
If the list was marked as computed, all values will be raw config
values. Fetch the individual keys from the config to get any known
values before validating.
Many cloud services prevent duplicate key pairs with different names.
Among them are Digital Ocean, Joyent Triton and Packet. Consequently, if
tests leave dangling resources it is not enough to simply randomise the
name, the entire key material must be regenerated.
This commit adds a helper method that returns a new randomly generated
key pair, where the public key material is formatted in OpenSSH
"authorized keys" format, and the private key material is PEM encoded.
The Required||Optional logic in schemaMap.Input was incorrect, causing
it to always request input. Fix the logic, and the associated tests
which were passing "just because".
This augments backend-config to also accept key=value pairs.
This should make Terraform easier to script rather than having to
generate a JSON file.
You must still specify the backend type as a minimal amount in
configurations, example:
```
terraform { backend "consul" {} }
```
This is required because Terraform needs to be able to detect the
_absense_ of that value for unsetting, if that is necessary at some
point.
helper/schema: Rename Timeout resource block to Timeouts
- Pluralize configuration argument name to better represent that there is
one block for many timeouts
- use a const for the configuration timeouts key
- update docs
the terraform package doesn't know about TestProvider, so don't put the
hooks in terraform.MockResourceProvider. Wrap the mock in the test where
we need to check the TestProvider functionality.
Call all ResourceProviderFactories and reset the providers before tests.
Store the provider and/or the error in a fixed factory function to be
returned again later.
Provider.TestReset resets the internal state of the Provider at the
start of a test. This also adds a MetaReset function field to
schema.Provider, which is called by TestReset and can be used to reset
any other tsated stored in the provider metadata.
This is currently used to reset the internal Context returned by
StopContext between tests, and should be implemented by a provider if
it stores a Context from a previous test.
* helper/schema: Add custom Timeout block for resources
* refactor DefaultTimeout to suuport multiple types. Load meta in Refresh from Instance State
* update vpc but it probably wont last anyway
* refactor test into table test for more cases
* rename constant keys
* refactor configdecode
* remove VPC demo
* remove comments
* remove more comments
* refactor some
* rename timeKeys to timeoutKeys
* remove note
* documentation/resources: Document the Timeout block
* document timeouts
* have a test case that covers 'hours'
* restore a System default timeout of 20 minutes, instead of 0
* restore system default timeout of 20 minutes, refactor tests, add test method to handle system default
* rename timeout key constants
* test applying timeout to state
* refactor test
* Add resource Diff test
* clarify docs
* update to use constants
This changes the type of values in Meta for InstanceState to
`interface{}`. They were `string` before.
This will allow richer structures to be persisted to this without
flatmapping them (down with flatmap!). The documentation clearly states
that only primitives/collections are allowed here.
The only thing using this was helper/schema for schema versioning.
Appropriate type checking was added to make this change safe.
The timeout work @catsby is doing will use this for a richer structure.
Fixes#12183
The fix is in flatmap for this but the entire issue is a bit more
complex. Given a schema with a computed set, if you reference it like
this:
lookup(attr[0], "field")
And "attr" contains a computed set within it, it would panic even though
"field" is available. There were a couple avenues I could've taken to
fix this:
1.) Any complex value containing any unknown value at any point is
entirely unknown.
2.) Only the specific part of the complex value is unknown.
I took route 2 so that the above works without any computed (since
"name" is not computed but something else is). This may actually have an
effect on other parts of Terraform configs, however those similar
configs would've simply crashed previously so it shouldn't break any
pre-existing configs.
To avoid chasing down issues like #11635 I'm proposing we disable the
shadow graph for end users now that we have merged in all the new
graphs. I've kept it around and default-on for tests so that we can use
it to test new features as we build them. I think it'll still have value
going forward but I don't want to hold us for making it work 100% with
all of Terraform at all times.
I propose backporting this to 0-8-stable, too.
Before this patch it was not possible to test for a key in a map where
the value is an empty string. With this patch, however, it is now
possible to write a check like:
```
resource.TestCheckResourceAttr("res.name", "mymap.KeyWithEmptyValue", ""),
```
To test that `KeyWithEmptyValue` is a valid key in `mymap`.
Fixes#10716
This trims whitespace around the key in the `-var` flag.
This is a regression from 0.7.x.
The value is whitespace sensitive unless double-quoted. This is the same
behavior as 0.7.x. I considered rejecting whitespace around the '='
completely but I don't want to introduce BC and the behavior actually
seems quite obvious to me.
This commit extracts the GPG code used for aws_iam_user_login_profile
into a library that can be reused for other resources, and updates the
call sites appropriately.
Accessing an interpolated value in a map through ConfigFieldReader can
fail, because GetRaw can't access interpolated values, so check if the
value exists at all by looking in the config. If the config has a value,
assume our map's value is interpolated and proceed as such.
We also need to lookup the correct schema to properly read a field from
a nested structure.
- Maps previously always defaulted to TypeString. Now check if Elem is a
ValueType and use that if applicable
- Lists now return the schema for nested element types, defaulting to a
TypeString like maps.
This only allows maps and lists to be nested one level deep, and the
inner map or list must only contain string values.
Fixes#10266
panicwrap was using Extrafiles to get the original standard streams for
`terraform console`. This doesn't work on Windows. Instead, we must use
the Win32 APIs to get the exact handles.
Needed due to work done in 95d37ea, we may need to adjust
hasComputedSubKeys to propagate NewComputed in the same way that we
have added "~", however will wait for comment from @mitchellh.
This covers:
* Complex sets with computed fields in a set
* Complex lists with computed fields in a set
Adding a test to test basic lists with computed fields seemed to fail,
but possibly for an unrelated reason (the list returned as nil). The fix
to this inparticular case may be out of the scope of this specific
issue.
Reference gist and details in hashicorp/terraform#9171.
This fixes some edge-ish cases where a set in a config has a set or list
in it that contains computed values, but non-set or list values in the
parent do not.
This can cause "diffs didn't match during apply" errors in a scenario
such as when a set's hash is calculated off of child items (including
any sub-lists or sets, as it should be), and the hash changes between
the plan and apply diffs due to the computed values present in the
sub-list or set items. These will be marked as computed, but due to the
fact that the function was not iterating over the list or set items
properly (ie: not adding the item number to the address, so
set.0.set.foo was being yielded instead of set.0.set.0.foo), these
computed values were not being properly propagated to the parent set to
be marked as computed.
Fixeshashicorp/terraform#6527.
Fixeshashicorp/terraform#8271.
This possibly fixes other non-CloudFront related issues too.
UniqueId attempted to provide an ordered unique id by using a nanosecond
timestamp, but doesn't take into account that time is not monotonic
increasing. This provides an implementation that will always be
increasing.
Fixes#10125
If the elements are computed and the field is ForceNew, then we should
mark the computed count as potentially forcing a new operation.
Example, assuming `groups` forces new...
**Step 1:**
groups = ["1", "2", "3"]
At this point, the resource isn't create, so this should result in a
diff like:
CREATE resource:
groups: "" => ["1", "2", "3"]
**Step 2:**
groups = ["${computedvar}"]
The OLD behavior was:
UPDATE resource
groups.#: "3" => "computed"
This would cause a diff mismatch because if `${computedvar}` was
different then it should force new. The NEW behavior is:
DESTROY/CREATE resource:
groups.#: "3" => "computed" (forces new)
Fixes#10122
The simple fix was that we forgot to close `ReadDataApply` for the
provider. But I've always felt that this section of the code was brittle
and I wanted to put in a more robust solution. The `shadow.Close` method
uses reflection to automatically close all values.
This turns the new graphs on by default and puts the old graphs behind a
flag `-Xlegacy-graph`. This effectively inverts the current 0.7.x
behavior with the new graphs.
We've incubated most of these for a few weeks now. We've found issues
and we've fixed them and we've been using these graphs internally for
awhile without any major issue. Its time to default them on and get them
part of a beta.
Fixes#2748
This changes the diff to only mark "forces new resource" on the fields
that actually caused the new resource, not every field that changed.
This makes diffs much more accurate.
I'd like to request a review but I'm going to defer merging until
Terraform 0.8. Changes like this are very possible to cause "diffs
didn't match" errors and I want some real world testing in a beta before
we hit prod with this.
Fixes#7715
If a bool field was computed and the raw value was not convertable to a
boolean, helper/schema would crash. The correct behavior is to try not
to read the raw value when the value is computed and to simply mark that
it is computed. This does that (and matches the behavior of the other
primitives).
Fixes#5138
If an item is optional and is removed completely from the configuration,
it should still trigger a destroy/create if the field itself was marked
as "ForceNew".
See the example in #5138.
This creates a standard package and interface for defining, querying,
setting experiments (`-X` flags).
I expect we'll want to continue to introduce various features behind
experimental flags. I want to make doing this as easy as possible and I
want to make _removing_ experiments as easy as possible as well.
The goal with this packge has been to rely on the compiler enforcing our
experiment references as much as possible. This means that every
experiment is a global variable that must be referenced directly, so
when it is removed you'll get compiler errors where the experiment is
referenced.
This also unifies and makes it easy to grab CLI flags to enable/disable
experiments as well as env vars! This way defining an experiment is just
a couple lines of code (documented on the package).
Fixes#3309
There are two primary changes, one to how helper/schema creates diffs
and one to how Terraform compares diffs. Both require careful
understanding.
== 1. helper/schema Changes
helper/schema, given any primitive field (string, int, bool, etc.)
_used to_ create a basic diff when given a computed new value (i.e. from
an unkown interpolation). This would put in the plan that the old value
is whatever the old value was, and the new value was the actual
interpolation. For example, from #3309, the diff showed the following:
```
~ module.test.aws_eip.test-instance.0
instance: "<INSTANCE ID>" => "${element(aws_instance.test-instance.*.id, count.index)}"
```
Then, when running `apply`, the diff would be realized and you would get
a diff mismatch error because it would realize the final value is the
same and remove it from the diff.
**The change:** `helper/schema` now marks unknown primitive values with
`NewComputed` set to true. Semantically this is correct for the diff to
have this information.
== 2. Terraform Diff.Same Changes
Next, the way Terraform compares diffs needed to be updated
Specifically, the case where the diff from the plan had a NewComputed
primitive and the diff from the apply _no longer has that value_. This
is possible if the computed value ended up being the same as the old
value. This is allowed to pass through.
Together, these fix#3309.
This reverts commit c3a4cff133, reversing
changes made to 791a02e6e4.
This change requires plugin recompilation and we should hold off until a
minor release for that.
This commit implements reusable functions for when resources have no
need to implement a particular operation:
- Noop - does nothing and returns no error.
- RemoveFromState - sets the resource ID to empty string (removing it
from state) and returns no error.
This is required for the times when the configuration cannot have an
empty configuration. An example would be in AzureRM, when you create a
LoadBalancer with a configuration, you can delete *all* but 1 of these
configurations
This changes the key for the storage to be the _raw_ source from the
module, not the fully expanded source. Example: it'll be a relative path
instead of an absolute path.
This allows the ".terraform/modules" directory to be portable when
moving to other machines. This was a behavior that existed in <= 0.7.2
and was broken with #8398. This amends that and adds a test to verify.
This commit adds a new callback, DiffSuppressFunc, to the schema.Schema
structure. If set for a given schema, a callback to the user-supplied
function will be made for each attribute for which the default
type-based diff mechanism produces an attribute diff. Returning `true`
from the callback will suppress the diff (i.e. pretend there was no
diff), and returning false will retain it as part of the plan.
There are a number of motivating examples for this - one of which is
included as an example:
1. On SSH public keys, trailing whitespace does not matter in many
cases - and in some cases it is added by provider APIs. For
digitalocean_ssh_key resources we previously had a StateFunc that
trimmed the whitespace - we now have a DiffSuppressFunc which
verifies whether the trimmed strings are equivalent.
2. IAM policy equivalence for AWS. A good proportion of AWS issues
relate to IAM policies which have been "normalized" (used loosely)
by the IAM API endpoints. This can make the JSON strings differ
from those generated by iam_policy_document resources or template
files, even though the semantics are the same (for example,
reordering of `bucket-prefix/` and `bucket-prefix/*` in an S3
bucket policy. DiffSupressFunc can be used to test for semantic
equivalence rather than pure text equivalence, but without having to
deal with the complexity associated with a full "provider-land" diff
implementation without helper/schema.
The WaitForState method can't read the result values in a timeout
because they are still owned by the running goroutine. Keep all values
scoped inside the goroutine, and save them into an atomic.Value to be
returned.
Fixes race introduced in #8510
This means that two resources created by the same rule will get names
which sort in the order they are created.
The rest of the ID is still random base32 characters; we no longer set
the bit values that denote UUIDv4.
The length of the ID returned by PrefixedUniqueId is not changed by this
commit; that way we don't break any resources where the underlying
resource has a name length limit.
Fixes#8143.
This commit adds a function which composes a series of TestFuncs, but
will run all tests before returning an error, unlike ComposeTestFunc.
This is useful when verifying contents of state in acceptance tests and
it is desirable to see all the failing cases in one run for slow
resources.
Jake Champlin