The CloserProviderTransformer requires that the resources be connected
to their provider first, so that it cen get the correct dependencies,
and adding the ProviderTransformer changed the test output slightly.
This turned out to be a big messy commit, since the way providers are
referenced is tightly coupled throughout the code. That starts to unify
how providers are referenced, using the format output node Name method.
Add a new field to the internal resource data types called
ResolvedProvider. This is set by a new setter method SetProvider when a
resource is connected to a provider during graph creation. This allows
us to later lookup the provider instance a resource is connected to,
without requiring it to have the same module path.
The InitProvider context method now takes 2 arguments, one if the
provider type and the second is the full name of the provider. While the
provider type could still be parsed from the full name, this makes it
more explicit and, and changes to the name format won't effect this
code.
The first step in only using the required provider nodes in a graph is
to be able to specifically add them from the configuration.
The MissingProviderTransformer was previously responsible for adding
all providers. Now it is really just adding any that are missing from
the config.
Needed to add more cases to support value comparison exceptions that the
rest of TF expects to work (this fixes tests in various places).
Also moved things to a switch block so that it's a little more compact.
A diff new needs to pass basic value checks to be considered the
"same". Several provisions have been added to ensure that the list, set,
and RequiresNew behaviours that have needed some exceptions in the past
are preserved in this new logic.
This ensures that we are checking for value equality as much as
possible, which will be more important when we transition to the
possibility of diffs being sourced from external data.
While merging the cached Input configs in the correct order prevents
overwriting existing config values, it doesn't prevent an earlier
provider from inserting unwanted values into later provider
configurations.
Diff the key-values returned by Input with the pre-input config, and
store only the "answers" that were added during the Input call.
Always call Input, even if we already have some values, since a
previously cached config may not be complete.
Previously when looking up cached provider input, the Input was taken in
its entirety, and only provider configuration fields that weren't in the
saved input were added. This would cause providers in modules to use the
entire configuration from parent modules, even if they themselves had
entirely different configs.
Note: this is only marginally beter than the old behavior. It may be
slightly more correct, but stil can't account for the user's intent, and
may be adding configured values from one provider into another.
Change the PathCacheKey to just join the path on a non-path character
(|), which makes for easier debugging.
Use the configured providers directly, rather than looking for inherited
provider configuration during graph evaluation.
First remove the provider config cache, and the associated
SetProviderConfig and ParentProviderConfig methods on the eval context.
Every provider must be configured, so there's no need to look for
configuration from other provider instances.
The config.ProviderConfig struct now has a Scope field which stores the
proper path for the interpolation scope. To get this metadata to the
interpolator, we add an EvalInterpolatProvider node which can carry the
ProviderConfig, and an InterpolateProvider context method to carry the
ProviderConfig.Scope into the InterplationScope.
Some of the tests could be adjusted to account for the new inheritance
behavior, and some were simply no longer valid and will be removed.
The remaining tests have questions on how they should work in practice.
This mostly concerns orphaned modules where there is no longer a way to
obtain a provider. In some cases we may require that a minimal provider
config be present to handle the destroy process, but we need further
testing.
All disabled code was commented out in this commit to record any
additional comments. The following commit will be a cleanup pass.
Update all references to the version values to use the new package.
The VersionString function was left in the terraform package
specifically for the aws provider, which is vendored. We can remove that
last call once the provider is updated.
In order to parse provider, resource and data source configuration from
HCL2 config files, we need to know the relevant configuration schema.
This new method allows Terraform Core to request these from a provider.
This is a breaking change to this interface, so all of its implementers
in this package are updated too. This includes concrete implementations
of the new method in helper/schema that use the schema conversion code
added in an earlier commit to produce a configschema.Block automatically.
Plugins compiled against prior versions of helper/schema will not have
support for this method, and so calls to them will fail. Callers of
this new method will therefore need to sniff for support using the
SchemaAvailable field added to both ResourceType and DataSource.
This careful handling will need to persist until next time we increment
the plugin protocol version, at which point we can make the breaking
change of requiring this information to be available.
DestroyValueReferenceTransformer is used during destroy to reverse the
edges for output and local values. Because destruction is going to
remove these from the state, nodes that depend on their value need to be
visited first.
When working on an existing plan, the context always used walkApply,
even if the plan was for a full destroy. Mark in the plan if it was
icreated for a destroy, and transfer that to the context when reading
the plan.
A Targeted graph may include outputs that were transitively included,
but if they are missing any dependencies they will fail to interpolate
later on.
Prune any outputs in the TargetsTransformer that have missing
dependencies, and are not depended on by any resource. This will
maintain the existing behavior of outputs failing silently ni most
cases, but allow errors to be surfaced where the output value is
required.
Module outputs may not have complete information during Input, because
it happens before refresh. Continue process on output interpolation
errors during the Input walk.
Remove the Input flag threaded through the input graph creation process
to prevent interpolation failures on module variables.
Use an EvalOpFilter instead to inset the correct EvalNode during
walkInput. Remove the EvalTryInterpolate type, and use the same
ContinueOnErr flag as the output node for consistency and to try and
keep the number possible eval node types down.
Locals don't need to be evaluated during destroy. Rather than simply
skipping them, remove them from the state as they are encountered. Even
though they are not persisted in the state, it keeps the state up to
date as the destroy happens, and we reduce the chance of other
inconstancies later on.
The fact that we clean up data source state by applying a "destroy" action
for them is an implementation detail, and so should not be visible to
outside callers or to the user.
Signalling these as real destroys creates confusion for users because
they see Terraform say things like:
data.template_file.foo: Refreshing state..."
...which, to an understandably-nervous sysadmin, might make them suspect
that the underlying object was deleted, rather than just Terraform's
record of it.
Previously the rendered plan output was constructed directly from the
core plan and then annotated with counts derived from the count hook.
At various places we applied little adjustments to deal with the fact that
the user-facing diff model is not identical to the internal diff model,
including the special handling of data source reads and destroys. Since
this logic was just muddled into the rendering code, it behaved
inconsistently with the tally of adds, updates and deletes.
This change reworks the plan formatter so that it happens in two stages:
- First, we produce a specialized Plan object that is tailored for use
in the UI. This applies all the relevant logic to transform the
physical model into the user model.
- Second, we do a straightforward visual rendering of the display-oriented
plan object.
For the moment this is slightly overkill since there's only one rendering
path, but it does give us the benefit of letting the counts be derived
from the same data as the full detailed diff, ensuring that they'll stay
consistent.
Later we may choose to have other UIs for plans, such as a
machine-readable output intended to drive a web UI. In that case, we'd
want the web UI to consume a serialization of the _display-oriented_ plan
so that it doesn't need to re-implement all of these UI special cases.
This introduces to core a new diff action type for "refresh". Currently
this is used _only_ in the UI layer, to represent data source reads.
Later it would be good to use this type for the core diff as well, to
improve consistency, but that is left for another day to keep this change
focused on the UI.
The implementation of ResourceAddress.Less was flawed because it was only
testing each field in the "less than" direction, and falling through in
cases where an earlier field compared greater than a later one.
Now we test for inequality first as the selector, and only fall through
if the two values for a given field are equal.
There is some additional, early validation on the "count" meta-argument
that verifies that only suitable variable types are used, and adding local
values to this whitelist was missed in the initial implementation.
It seems that this somehow got lost in the commit/rebase shuffle and
wasn't caught by the tests that _did_ make it because they were all using
just one file.
As a result of this bug, locals would fail to work correctly in any
configuration with more than one .tf file.
Along with restoring the append/merge behavior, this also reworks some of
the tests to exercise the multi-file case as better insurance against
regressions of this sort in future.
This fixes#15969.
Previously we were checking required_version only during "real" operations, and not during initialization. Catching it during init is better because that's the first command users run on a new working directory.
Go 1.9 adds this new function which, when called, marks the caller as
being a "helper function". Helper function stack frames are then skipped
when trying to find a line of test code to blame for a test failure, so
that the code in the main test function appears in the test failure output
rather than a line within the helper function itself.
This covers many -- but probaly not all -- of our test helpers across
various packages.
The shadow graph was incredibly useful during the 0.7 cycle but these days
it is idle, since we're not planning any significant graph-related changes
for the forseeable future.
The shadow graph infrastructure is somewhat burdensome since any change
to the ResourceProvider interface must have shims written. Since we _are_
expecting changes to the ResourceProvider interface in the next few
releases, I'm calling "YAGNI" on the shadow graph support to reduce our
maintenence burden.
If we do end up wanting to use shadow graph again in future, we'll always
be able to pull it out of version control and then make whatever changes
we skipped making in the mean time, but we can avoid that cost in the
mean time while we don't have any evidence that we'll need to pay it.
We stash the locals in the module state in a map that is ignored for JSON
serialization. We don't include locals in the persisted state because they
can be trivially recomputed and this allows us to assume that they will
pass through verbatim, without any normalization or other transforms
caused by the JSON serialization.
From a user standpoint a local is just a named alias for an expression,
so it's desirable that the result passes through here in as raw a form
as possible, so it behaves as closely as possible to simply using the
given expression directly.
A local value is similar to an output in that it exists only within state
and just always evaluates its value as best it can with the current state.
Therefore it has a single graph node type for all walks, which will
deal with that evaluation operation.
Allow module variables to fail interpolation during input. This is OK
since they will be verified again during Plan. Because Input happens
before Refresh, module variable interpolation can fail when referencing
values that aren't yet in the state, but are expected after Refresh.
Forward-port the plan state check from the 0.9 series.
0.10 has improved the serial handling for the state, so this adds
relevant comments and some more test coverage for the case of an
incrementing serial during apply.
The state returned from the testState helper shouldn't rely on any
mutations caused by WriteState. The Init function (which is analogous to
NewState) shoudl set any required fields.
Previously we relied on a constellation of coincidences for everything to
work out correctly with state serials. In particular, callers needed to
be very careful about mutating states (or not) because many different bits
of code shared pointers to the same objects.
Here we move to a model where all of the state managers always use
distinct instances of state, copied when WriteState is called. This means
that they are truly a snapshot of the state as it was at that call, even
if the caller goes on mutating the state that was passed.
We also adjust the handling of serials so that the state managers ignore
any serials in incoming states and instead just treat each Persist as
the next version after what was most recently Refreshed.
(An exception exists for when nothing has been refreshed, e.g. because
we are writing a state to a location for the first time. In that case
we _do_ trust the caller, since the given state is either a new state
or it's a copy of something we're migrating from elsewhere with its
state and lineage intact.)
The intent here is to allow the rest of Terraform to not worry about
serials and state identity, and instead just treat the state as a mutable
structure. We'll just snapshot it occasionally, when WriteState is called,
and deal with serials _only_ at persist time.
This is intended as a more robust version of #15423, which was a quick
hotfix to an issue that resulted from our previous slopping handling
of state serials but arguably makes the problem worse by depending on
an additional coincidental behavior of the local backend's apply
implementation.
Skips checksum validation if the `TF_SKIP_PROVIDER_VERIFY` environment variable is set. Undocumented variable, as the primary goal is to significantly improve the local provider development workflow.
When the InstanceState.Meta fields are marshaled, numeric values may
change types. The timeout system currently inserts integer values, which
will be unmarshal as float64s.
To ensure that a state which has round-tripped through json is equal to
itself, compare the json representation of the Meta values.
Added a new test that ensures that pre/post-diff hooks are not called
when EvalDiff is run with Stub set, tested through a full refresh run.
This helps test the expected behaviour of EvalDiff itself, versus the
end result of the diff being counted in a plan, which is what the
TestLocal_planScaleOutNoDupeCount test in backend/local checks.
Rather than overloading InstanceDiff with a "Stub" attribute that is
going to be largely meaningless, we are just going to skip
pre/post-diff hooks altogether. This is under the notion that we will
eventually not need to "stub" a diff for scale-out, stateless nodes on
refresh at all, so diff behaviour won't be necessary at that point, so
we should not assume that hooks will run at this stage anyway.
Also as part of this removed the CountHook test that is now failing
because CountHook is out of scope of the new behaviour.
This should make things a bit more clear as to what we are doing in the
EvalTree scale-out test - ensuring that we get the correct eval sequence
for a node with no state through EvalTree.
During plan and apply, because the provider constraints need to be built
from a plan, they are not checked until the terraform.Context is
created. Since the context is always requested by the backend during the
Operation, the backend needs to be responsible for generating contextual
error messages for the user.
Instead of formatting the ResolveProviders errors during NewContext,
return a special error type, ResourceProviderError to signal that
init will be required. The backend can then extract and format the
errors.
This is a specialized thin wrapper around parseResourceAddressInternal
that can be used to obtain a ResourceAddress from the keys in
ModuleDiff.Resources.
This is not something we'd ideally expose, but since the internal address
format is already exposed in the ModuleDiff object this ends up being
necessary to process the ModuleDiff from other packages, e.g. for
display in the UI.
Lexicographic sorting by the string form produces the wrong result because
[9] sorts after [10], so this custom comparison function takes that into
account and compares each portion separately to get a more intuitive
result.
This transformer is no longer needed, as we are not transforming
scale-out resource nodes into plannable nodes anymore, but rather just
taking a different eval sequence for resource refresh nodes with no
state.
This test ensures that the right EvalSequence gets set for a refresh
node with no state. This will ultimately assert that nodes on scale out
will not go down the regular refresh path, which would result in an
error due to the nil state - instead, we stub this node so that we get a
diff on it that can be used to effect computed/unknown values on
interpolations that may depend on this node.
Since the transformer that changed stateless nodes in refresh to
NodePlannableResourceInstance is not being used anymore, this test
needed to be adjusted to ensure that the right output was expected.
Changed the language of this field to indicate that this diff is not a
"real" diff, in that it should not be acted on, versus a "quiet" mode,
which would indicate just simply to act silently.
This fixes a bug with the new refresh graph behaviour where a resource
was being counted twice in the UI on part of being scaled out:
* We are no longer transforming refresh nodes without state to
plannable resources (the transformer will be removed shortly)
* A Quiet flag has been added to EvalDiff and InstanceDiff - this
allows for the flagging of a diff that should not be treated as real
diff for purposes of planning
* When there is no state for a refresh node now, a new path is taken
that is similar to plan, but flags Quiet, and does nothing with the
diff afterwards.
Tests pending - light testing has confirmed this should fix the double
count issue, but we should have some tests to actually confirm the bug.
Previously the behavior for -target when given a module address was to
target only resources directly within that module, ignoring any resources
defined in child modules.
This behavior turned out to be counter-intuitive, since users expected
the -target address to be interpreted hierarchically.
We'll now use the new "Contains" function for addresses, which provides
a hierarchical "containment" concept that is more consistent with user
expectations. In particular, it allows module.foo to match
module.foo.module.bar.aws_instance.baz, where before that would not have
been true.
Since Contains isn't commutative (unlike Equals) this requires some
special handling for targeting specific indices. When given an argument
like -target=aws_instance.foo[0], the initial graph construction (for
both plan and refresh) is for the resource nodes from configuration, which
have not yet been expanded to separate indexed instances. Thus we need
to do the first pass of TargetsTransformer in mode where indices are
ignored, with the work then completed by the DynamicExpand method which
re-applies the TargetsTransformer in index-sensitive mode.
This is a breaking change for anyone depending on the previous behavior
of -target, since it will now select more resources than before. There is
no way provided to obtain the previous behavior. Eventually we may support
negative targeting, which could then combine with positive targets to
regain the previous behavior as an explicit choice.
This is similar in purpose to Equals but it takes a hierarchical approach
where modules contain their child modules, resources are contained by
their modules, and indexed resource instances are contained by their
resource names.
Unlike "Equals", Contains is intended to be transitive, so if A contains B
and B contains C, then C necessarily contains A. It is also directional:
if A contains B then B does not also contain A unless A and B are
identical. This results in more intuitive behavior for use-cases where
the goal is to select a portion of the address space for an operation.
As part of our terminology shift, the interpolation variable for the name
of the current workspace changes to terraform.workspace. The old name
continues to be supported for compatibility.
We can't generate a deprecation warning from here so for now we'll just
silently accept terraform.env as an alias, but not mention it at all in
the error message in the hope that its use phases out over time before we
actually remove it.
The information stored in a plan is tightly coupled to the Terraform core
and provider plugins that were used to create it, since we have no
mechanism to "upgrade" a plan to reflect schema changes and so mismatching
versions are likely to lead to the "diffs didn't match during apply"
error.
To allow us to catch this early and return an error message that _doesn't_
say it's a bug in Terraform, we'll remember the Terraform version and
plugin binaries that created a particular plan and then require that
those match when loading the plan in order to apply it.
The planFormatVersion is increased here so that plan files produced by
earlier Terraform versions _without_ this information won't be accepted
by this new version, and also that older versions won't try to process
plans created by newer versions.
When set, this information gets passed on to the provider resolver as
part of the requirements information, causing us to reject any plugins
that do not match during initialization.
Previously one of the errors had a built-in context message and the other
did not, making it hard for callers to present a user-friendly message
in both cases.
Now we generate an error message of the same form in both cases, with one
case providing additional information. Ideally the main case would be
able to give more specific guidance too, but that's hard to achieve with
the current regexp-based parsing implementation.
This is a useful building block for filtering configuration based on a
resource address. It is similar in principle to state filtering, but for
specific resource configuration blocks.
This allows growing the scope of a resource address to include all of the
resources in the same module as the targeted resource. This is useful to
give context in error messages.
The resource address documentation defines a resource address as being in
two parts: the module path and the resource spec. The resource spec can
be omitted, which represents addressing _all_ resources in a module.
In some cases (such as import) it doesn't make sense to address an entire
module, so this helper makes it easy for validation code to check for
this to reject insufficiently-specific resource addresses.
We're going to use config to determine provider dependencies, so we need
to always provide a config when instantiating a context or we'll end up
loading no providers at all.
We previously had a test for running "terraform import -config=''" to
disable the config entirely, but this test is now removed because it makes
no sense. The actual functionality its testing still remains for now,
but it will be removed in a subsequent commit when we start requiring that
a resource to be imported must already exist in configuration.
Rather than providing an already-resolved map of plugins to core, we now
provide a "provider resolver" which knows how to resolve a set of provider
dependencies, to be determined later, and produce that map.
This requires the context to be instantiated in a different way, so this
very noisy diff is a mostly-mechanical update of all of the existing
places where contexts get created for testing, using some adapted versions
of the pre-existing utilities for passing in mock providers.
Previously the set of providers was fixed early on in the command package
processing. In order to be version-aware we need to defer this work until
later, so this interface exists so we can hold on to the possibly-many
versions of plugins we have available and then later, once we've finished
determining the provider dependencies, select the appropriate version of
each provider to produce the final set of providers to use.
This commit establishes the use of this new mechanism, and thus populates
the provider factory map with only the providers that result from the
dependency resolution process.
This disables support for internal provider plugins, though the
mechanisms for building and launching these are still here vestigially,
to be cleaned up in a subsequent commit.
This also adds a new awkward quirk to the "terraform import" workflow
where one can't import a resource from a provider that isn't already
mentioned (implicitly or explicitly) in config. We will do some UX work
in subsequent commits to make this behavior better.
This breaks many tests due to the change in interface, but to keep this
particular diff reasonably easy to read the test fixes are split into
a separate commit.
ResourceProviderResolver is an extra level of indirection before we
get to a map[string]ResourceProviderFactory, which accepts a map of
version constraints and uses it to choose from potentially-many available
versions of each provider to produce a single ResourceProviderFactory
for each one requested.
As of this commit the ResourceProviderResolver interface is not used. In
a future commit the ContextOpts.Providers map will be replaced with a
resolver instance, with the creation of the factory delayed until the
version constraints have been resolved.
Previously the Type of a ResourceState was generally ignored, but we're
now starting to use it to figure out which providers are needed to
support the resources in state so our tests need to set it accurately
in order to get the expected result.
This new private function takes a configuration tree and a state structure
and finds all of the explicit and implied provider dependencies
represented, returning them as a moduledeps.Module tree structure.
It annotates each dependency with a "reason", which is intended to be
useful to a user trying to figure out where a particular dependency is
coming from, though we don't yet have any UI to view this.
Nothing calls this yet, but a subsequent commit will use the result of
this to produce a constraint-conforming map of provider factories during
context initialization.
Previously the logic for inferring a provider type from a resource name
was buried a utility function in the 'terraform' package. Instead here we
lift it up into the 'config' package where we can make broader use of it
and where it's easier to discover.
* core: Add 'UserAgentString' helper function to generate a standard UserAgent string. Example generation: 'Terraform 0.9.7-dev (go1.8.1)'
* provider/openstack: Add Terraform version to UserAgent string
Prior to Terraform 0.7, lists in Terraform were just a shallow abstraction
on top of strings with a magic delimiter between items. Wrapping a single
string in brackets in the configuration was Terraform's prompt that it
needed to split the string on that delimiter during interpolation.
In 0.7, when first-class lists were added, this convention was preserved
by flattening lists-of-lists by one level when they were encountered in
configuration. However, there was an oversight in that change where it
did not correctly handle the case where the inner list was unknown.
In #14135 we removed some code that was flattening partially-unknown lists
into fully-unknown (untyped) values. This inadvertently exposed the missed
case from the previous paragraph, causing issues for list-wrapped splat
expressions with unknown members. While this worked fine for resources,
due to some fixup done inside helper/schema, this did not work for other
interpolation contexts such as module blocks.
Various attempts to fix this up and restore the flattening behavior
selectively were unsuccessful, due to a proliferation of assumptions all
over the core code that would be too risky to change just to fix this bug.
This change, then, takes the different approach of removing the
requirement that splats be presented inside list brackets. This
requirement didn't make much sense anymore anyway, since no other
list-returning expression had this constraint and so the rest of Terraform
was already successfully dealing with both cases.
This leaves us with two different scenarios:
- For resource arguments, existing normalization code in helper/schema
does its own flattening that preserves compatibility with the common
practice of using bracketed splats. This change proves this with a test
within the "test" provider that exercises the whole Terraform core and
helper/schema stack that assigns bracketed splats to list and set
attributes.
- For arguments in other blocks, such as in module callsites, the
interpolator's own flattening behavior applies to known lists,
preserving compatibility with configurations from before
partially-computed splats were possible, but those wishing to use
partially-computed splats are required to drop the surrounding brackets.
This is less concerning because this scenario was introduced only in
0.9.5, so the scope for breakage is limited to those who adopted this
new feature quickly after upgrading.
As of this commit, the recommendation is to stop using brackets around
splats but the old form continues to be supported for backward
compatibility. In a future _major_ version of Terraform we will probably
phase out this legacy form to improve consistency, but for now both
forms are acceptable at the expense of some (pre-existing) weird behavior
when _actual_ lists-of-lists are used.
This addresses #14521 by officially adopting the suggested workaround of
dropping the brackets around the splat. However, it doesn't yet allow
passing of a partially-unknown list between modules: that still violates
assumptions in Terraform's core, so for the moment partially-unknown lists
work only within a _single_ interpolation expression, and cannot be
passed around between expressions. Until more holistic work is done to
improve Terraform's type handling, passing a partially-unknown splat
through to a module will result in a fully-unknown list emerging on
the other side, just as was the case before #14135; this change just
addresses the fact that this was failing with an error in 0.9.5.
Instead of using a hardcoded version prerelease string, which makes release automation difficult, set the version prerelease string from an environment variable via the go linker tool during compile time.
The environment variable `TF_RELEASE` should only be set via the `make bin` target, and thus leaves the version prerelease string unset. Otherwise, when running a local compile of terraform via the `make dev` makefile target, the version prerelease string is set to `"dev"`, as usual.
This also requires some changes to both the circonus and postgresql providers, as they directly used the `VersionPrerelease` constant. We now simply call the `VersionString()` function, which returns the proper interpolated version string with the prerelease string populated correctly.
`TF_RELEASE` is unset:
```sh
$ make dev
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/05/22 10:38:19 Generated command/internal_plugin_list.go
==> Removing old directory...
==> Building...
Number of parallel builds: 3
--> linux/amd64: github.com/hashicorp/terraform
==> Results:
total 209M
-rwxr-xr-x 1 jake jake 209M May 22 10:39 terraform
$ terraform version
Terraform v0.9.6-dev (fd472e4a86500606b03c314f70d11f2bc4bc84e5+CHANGES)
```
`TF_RELEASE` is set (mimicking the `make bin` target):
```sh
$ TF_RELEASE=1 make dev
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/05/22 10:40:39 Generated command/internal_plugin_list.go
==> Removing old directory...
==> Building...
Number of parallel builds: 3
--> linux/amd64: github.com/hashicorp/terraform
==> Results:
total 121M
-rwxr-xr-x 1 jake jake 121M May 22 10:42 terraform
$ terraform version
Terraform v0.9.6
```
For child modules, a ModuleState isn't allocated until the first time a
module instance is inserted into the state under the module's path.
Normally interpolations of resource attributes are delayed until at least
one resource has been created due to the nature of the dependency graph,
but if the interpolation value is a multi-var (splat) then it is possible
that the referenced resource has count=0 and thus created _no_ resource
states when it was visited.
Previously we would crash when trying to access the resource map for the
nil module in order to count how many instances are present. Since we know
there can't be any instances present in a nil module, we now preempt
this crash by returning zero early.
This edge-case does not apply to the root module because its ModuleState
is allocated as part of initializing the main State instance.
This fixes#14438.
Currently, the refresh graph uses the resources from state as a base,
with data sources then layered on. Config is not consulted for resources
and hence new resources that are added with count (or any new resource
from config, for that matter) do not get added to the graph during
refresh.
This is leading to issues with scale in and scale out when the same
value for count is used in both resources, and data sources that may
depend on that resource (and possibly vice versa). While the resources
exist in config and can be used, the fact that ConfigTransformer for
resources is missing means that they don't get added into the graph,
leading to "index out of range" errors and what not.
Further to that, if we add these new resources to the graph for scale
out, considerations need to be taken for scale in as well, which are not
being caught 100% by the current implementation of
NodeRefreshableDataResource. Scale-in resources should be treated as
orphans, which according to the instance-form NodeRefreshableResource
node, should be NodeDestroyableDataResource nodes, but this this logic
is currently not rolled into NodeRefreshableDataResource. This causes
issues on scale-in in the form of race-ish "index out of range" errors
again.
This commit updates the refresh graph so that StateTransformer is no
longer used as the base of the graph. Instead, we add resources from the
state and config in a hybrid fashion:
* First off, resource nodes are added from config, but only if
resources currently exist in state. NodeRefreshableManagedResource
is a new expandable resource node that will expand count and add
orphans from state. Any count-expanded node that has config but no
state is also transformed into a plannable resource, via a new
ResourceRefreshPlannableTransformer.
* The NodeRefreshableDataResource node type will now add count orphans
as NodeDestroyableDataResource nodes. This achieves the same effect
as if the data sources were added by StateTransformer, but ensures
there are no races in the dependency chain, with the added benefit of
directing these nodes straight to the proper
NodeDestroyableDataResource node.
* Finally, config orphans (nodes that don't exist in config anymore
period) are then added, to complete the graph.
This should ensure as much as possible that there is a refresh graph
that best represents both the current state and config with updated
variables and counts.
The previous behavior of targets was that targeting a particular node
would implicitly target everything it depends on. This makes sense when
the dependencies in question are between resources, since we need to
make sure all of a resource's dependencies are in place before we can
create or update it.
However, it had the undesirable side-effect that targeting a resource
would _exclude_ any outputs referring to it, since the dependency edge
goes from output to resource. This then causes the output to be "stale",
which is problematic when outputs are being consumed by downstream
configs using terraform_remote_state.
GraphNodeTargetDownstream allows nodes to opt-in to a new behavior where
they can be targeted by _inverted_ dependency edges. That is, it allows
outputs to be considered targeted if anything they directly depend on
is targeted.
This is different than the implied targeting behavior in the other
direction because transitive dependencies are not considered unless the
intermediate nodes themselves have TargetDownstream. This means that
an output1→output2→resource chain can implicitly target both outputs, but
an output→resource1→resource2 chain _won't_ target the output if only
resource2 is targeted.
This behavior creates a scenario where an output can be visited before
all of its dependencies are ready, since it may have a mixture of both
targeted and untargeted dependencies. This is fine for outputs because
they silently ignore any errors encountered during interpolation anyway,
but other hypothetical future implementers of this interface may need to
be more careful.
This fixes#14186.
This was actually redundant anyway since HIL itself applied a similar
rule where any partially-unknown list would be automatically flattened
to a single unknown value.
However, now we're changing HIL to explicitly permit partially-unknown
lists so that we can allow the index operator [...] to succeed when
applied to one of the elements that _is_ known.
This, in conjunction with hashicorp/hil#51 and hashicorp/hil#52,
fixes#3449.
stringer has changed the boilerplate it generates in a recent version.
We'd previously updated to the new format but accientally rolled back
to the old while merging a long-running feature branch.
This restores us back to the new format again.
Moving the transformer wholesale looks like it broke some tests, with
some actually doing legit work in normalizing singular resources from a
foo.0 notation to just foo.
Adjusted the TestPlanGraphBuilder to account for the extra
meta.count-boundary nodes in the graph output now, as well as added
another context test that tests this case. It appears the issue happens
during validate, as this is where the state can be altered to a broken
state if things are not properly transformed in the plan graph.
This fixes interpolation issues on grandchild data sources that have
multiple instances (ie: counts). For example, baz depends on bar, which
depends on foo.
In this instance, after an initial TF run is done and state is saved,
the next refresh/plan is not properly transformed, and instead of the
graph/state coming through as data.x.bar.0, it comes through as
data.x.bar. This breaks interpolations that rely on splat operators -
ie: data.x.bar.*.out.
* Revert #11245, #11321, #11498 and #11757
These PR’s are all related to issue #11170 for which I would like to propose a different solution then the one currently implemented.
* A different approach to solve #11170
This approach has (IMHO) a few advantages with regards to the solution currently implemented. I will elaborate on this in the PR.
The documentation for Refresh indicates that it will always return a
valid state, but that wasn't true in the case of a graph builder error.
While this same concept wasn't documented for Apply, it was still
assumed in the terraform apply code.
Since the helper testing framework relies on the absence of a state to
determine if it can call Destroy, the Context can't can't start
returning a state in all cases. Document this, and use the State method
to fetch the correct state value after Apply.
Add a nil check to the WriteState function, so that writing a nil state
is a noop.
Make sure to init before sorting the state, to make sure we're not
attempting to sort nil values. This isn't technically needed with the
current code, but it's just safer in general.
Make sure duplicate depends_on entries are pruned from existing states
on read.
Make sure new state built from configs with multiple references to the
same resource only add it once to the Dependencies.
duplicate entries could end up in "depends_on" in the state, which could
possible lead to erroneous state comparisons. Remove them when walking
the graph, and remove existing duplicates when pruning the state.
Previously this function was depending on the mapstructure behavior of
failing with an error when trying to decode a map into a list or
vice-versa, but mapstructure's WeakDecode behavior changed so that it
will go to greater lengths to coerce the given value to fit into the
target type, causing us to mis-handle certain ambigous cases.
Here we exert a bit more control over what's going on by using 'reflect'
to first check whether we have a slice or map value and only then try
to decode into one with mapstructure. This allows us to still rely on
mapstructure's ability to decode nested structures but ensure that lists
and maps never get implicitly converted to each other.
Since the validation of connection blocks is delegated to the communicator
selected by "type", we were not previously doing any validation of the
attribute names in these blocks until running provisioners during apply.
Proper validation here requires us to already have the instance state,
since the final connection info is a merge of values provided in config
with values assigned automatically by the resource. However, we can do
some basic name validation to catch typos during the validation pass, even
though semantic validation and checking for missing attributes will still
wait until the provisioner is instantiated.
This fixes#6582 as much as we reasonably can.
This previously lacked tests altogether. This new test verifies the
"happy path", ensuring that both literal and computed values pass through
correctly into the VariableValues map.
This crash resulted because the type switch checked for either of two
types but the type assertion within it assumed only one of them.
A straightforward (if inelegant) fix is to simply duplicate the relevant
case block and change the type assertion, thus allowing the types to match
up in all cases.
This fixes#13297.
During the input walk we stash the values resulting from user input
(if any) in the eval context for use when later walks need to resolve
the provider config.
However, this repository of input results is only able to represent
literal values, since it does not retain the record of which of the keys
have values that are "computed".
Previously we were blindly stashing all of the results, failing to
consider that some of them might be computed. That resulted in the
UnknownValue placeholder being misinterpreted as a literal value when
the data is used later, which ultimately resulted in it clobbering the
actual expression evaluation result and thus causing the provider to
fail to configure itself.
Now we are careful to only retain in this repository the keys whose values
are known statically during the input phase. This eventually gets merged
with the dynamic evaluation results on subsequent walks, with the dynamic
keys left untouched due to their absence from the stored input map.
This fixes#11264.
This method mirrors that of config.Backend, so we can compare the
configration of a backend read from a config vs that of a backend read
from a state. This will prevent init from reinitializing when using
`-backend-config` options that match the existing state.
golang/tools commit 23ca8a263 changed the format of the leading comment
to comply with some new standards discussed here:
https://golang.org/issue/13560
This is the result of running generate with the latest version of
stringer. Everyone working on Terraform will need to update stringer
after this is merged, to avoid reverting this:
go get -u golang.org/x/tools/cmd/stringer
It appears there are no tests for this as far as I can find.
We change V1 states (very old) to assume a nil path is a root path.
Staet.Validate() later will catch any duplicate paths.
When transforming a diff from DestroyCreate to a simple Update,
ignore_changes can cause keys from flatmapped objects to be filtered
form the diff. We need to filter each flatmapped container as a whole to
ensure that unchanged keys aren't lost in the update.
ignore_changes is causing changes in other flatmapped sets to be
filtered out incorrectly.
This required fixing the testDiffFn to create diffs which include the
old value, breaking one other test.
Fixes#12836
Realistically, these should be caught during validation anyways. In this
case, this was causing 12386 because refresh with a data source will
attempt to use module variables. I don't see any clear logic to prune
those module variables or not add them so its easier to return unknown
to cause the data to be computed and not run.
the terraform package doesn't know about TestProvider, so don't put the
hooks in terraform.MockResourceProvider. Wrap the mock in the test where
we need to check the TestProvider functionality.
Always wait for watchStop to return during context.walk.
Context.walk would often complete immediately after sending the close
signal to watchStop, which would in turn call the deferred releaseRun
cancelling the runContext.
Without any synchronization points after the select statement in
watchStop, that goroutine was not guaranteed to be scheduled
immediately, and in fact it often didn't continue until after the
runContext was canceled. This in turn left the select statement with
multiple successful cases, and half the time it would chose to Stop the
providers.
Stopping the providers after the walk of course didn't cause any
immediate failures, but if there was another walk performed, the
provider StopContext would no longer be valid and could cause
cancellation errors in the provider.
Starting with Go 1.8 betas, we've periodically received SIGQUITs on our
tests in Travis. The stack trace looks like this:
https://gist.github.com/mitchellh/abf09b0980f8ea01269f8d9d6133884d
The tests are timing out! This is a test that hasn't been touched really
in a very long time and has always passed. I've **reproduced this
locally** by setting `GOMAXPROCS=1` and running the test. By yielding
the scheduler in the hot loop, it now passes almost instantly every
time.
Perhaps the test can be written in a different way, but this gets tests
passing and I think will fix our periodic errors.
A couple interpolation tests were using invalid state that didn't match
the config. These will still pass but were flushed out by an attempt to
make this an error. The repl however still required interpolation
without a config, and tests there will provide a indication if this
behavior changes.
It turns out that a few use cases depend on not finding a resource
without an error.
The other code paths had sufficient nil checks for this, but there was
one place where we called Count() that needed to be checked. If the
existence of the resource matters, it would be caught at a higher level
and still return an "unknown resource" error to the user.
Module resource were being sorted lexically by name by the state filter.
If there are 10 or more resources, the order won't match the index
order, and resources will have different indexes in their new location.
Sort the FilterResults by index numerically when the names match.
Clean up the module String output for visual inspection by sorting
Resource name parts numerically when they are an integer value.
Due to the change to `interface{}` we need to use `reflect.DeepEqual`
here. With the restriction of primitive types this should always be
safe. We'll never get functions, channels, etc.
This changes the type of values in Meta for InstanceState to
`interface{}`. They were `string` before.
This will allow richer structures to be persisted to this without
flatmapping them (down with flatmap!). The documentation clearly states
that only primitives/collections are allowed here.
The only thing using this was helper/schema for schema versioning.
Appropriate type checking was added to make this change safe.
The timeout work @catsby is doing will use this for a richer structure.
Fixes#12183
The fix is in flatmap for this but the entire issue is a bit more
complex. Given a schema with a computed set, if you reference it like
this:
lookup(attr[0], "field")
And "attr" contains a computed set within it, it would panic even though
"field" is available. There were a couple avenues I could've taken to
fix this:
1.) Any complex value containing any unknown value at any point is
entirely unknown.
2.) Only the specific part of the complex value is unknown.
I took route 2 so that the above works without any computed (since
"name" is not computed but something else is). This may actually have an
effect on other parts of Terraform configs, however those similar
configs would've simply crashed previously so it shouldn't break any
pre-existing configs.
Fixes#10911
Outputs that aren't targeted shouldn't be included in the graph.
This requires passing targets to the apply graph. This is unfortunate
but long term should be removable since I'd like to move output changes
to the diff as well.
During backend initialization, especially during a migration, there is a
chance that an existing state could be overwritten.
Attempt to get a locks when writing the new state. It would be nice to
always have a lock when reading the states, but the recursive structure
of the Meta.Backend config functions makes that quite complex.
Fixes#11749
I'm **really** surprised this didn't come up earlier.
When only the state is available for a node, the advertised
referenceable name (the name used for dependency connections) included
the module path. This module path is automatically prepended to the
name. This means that probably every non-root resource for state-only
operations (destroys) didn't order properly.
This fixes that by omitting the path properly.
Multiple tests added to verify both graph correctness as well as a
higher level context test.
Will backport to 0.8.x
To avoid chasing down issues like #11635 I'm proposing we disable the
shadow graph for end users now that we have merged in all the new
graphs. I've kept it around and default-on for tests so that we can use
it to test new features as we build them. I think it'll still have value
going forward but I don't want to hold us for making it work 100% with
all of Terraform at all times.
I propose backporting this to 0-8-stable, too.
Fixes#11349
I tracked this bug back to the early 0.7 days so this has been around a
really long time. I wanted to confirm that this wasn't introduced by any
new graph changes and it appears to predate all of that. I couldn't find
a single 0.7.x release where this worked, and I didn't want to go back
to 0.6.x since it was pre-vendoring.
The test case shows the logic the best, but the basic idea is: for
collections that go to zero elements, the "RequiresNew" sameness check
should be ignored, since the new diff can choose to not have that at all
in the diff.
This adds a Meta field (similar to InstanceState.Meta) to InstanceDiff.
This allows providers to store arbitrary k/v data as part of a diff and
have it persist through to the Apply. This will be used by helper/schema
for timeout storage being done by @catsby.
The type here is `map[string]interface{}`. A couple notes:
* **Not using `string`**: The Meta field of InstanceState is a string
value. We've learned that forcing things to strings is bad. Let's
just allow types.
* **Primitives only**: Even though it is type `interface{}`, it must
be able to cleanly pass the go-plugin RPC barrier as well as be
encoded to a file as Gob. Given these constraints, the value must
only comprise of primitive types and collections. No structs,
functions, channels, etc.
Read state would assume that having a reader meant there should be a
valid state. Check for an empty file and return ErrNoState to
differentiate a bad file from an empty one.
This disables the computed value check for `count` during the validation
pass. This enables partial support for #3888 or #1497: as long as the
value is non-computed during the plan, complex values will work in
counts.
**Notably, this allows data source values to be present in counts!**
The "count" value can be disabled during validation safely because we
can treat it as if any field that uses `count.index` is computed for
validation. We then validate a single instance (as if `count = 1`) just
to make sure all required fields are set.
This switches to the Go "context" package for cancellation and threads
the context through all the way to evaluation to allow behavior based on
stopping deep within graph execution.
This also adds the Stop API to provisioners so they can quickly exit
when stop is called.
Fixes#11212
The import graph builder was missing the transform to setup links to
parent providers, so provider inheritance didn't work properly. This
adds that.
This also removes the `PruneProviderTransform` since that has no value
in this graph since we'll never add an unused provider.
This was possible with test fixtures but it is also conceiably possible
with older states or corrupted states. We can also extract the type from
the key so we do that now so that StateFilter is more robust.
Removal of empty nested containers from a flatmap would sometimes fail a
sanity check when removed in the wrong order. This would only fail
sometimes due to map iteration. There was also an off-by-one error in
the prefix check which could match the incorrect keys.
When a InstanceState is merged with an InstanceDiff, any maps arrays or
sets that no longer exist are shown as empty with a count of 0. If these
are left in the flatmap structure, they will cause errors during
expansion because their existing in the map affects the counts for
parent structures.
The change in #10787 used flatmap.Expand to fix interpolation of nested
maps, but it broke interpolation of sets such that their elements were
not represented. For example, the expected string representation of a
splatted aws_network_interface.whatever.*.private_ips should be:
```
[{Variable (TypeList): [{Variable (TypeString): 10.41.17.25}]} {Variable (TypeList): [{Variable (TypeString): 10.41.22.236}]}]
```
But instead it became:
```
[{Variable (TypeList): [{Variable (TypeString): }]} {Variable (TypeList): [{Variable (TypeString): }]}]
```
This is because the expandArray function of expand.go treated arrays to
exclusively be lists, e.g. not sets. The old code used to match for
numeric keys, so it would work for sets, whereas expandArray just
assumed keys started at 0 and ascended incrementally. Remember that
sets' keys are numeric, but since they are hashes, they can be any
integer. The result of assuming that the keys start at 0 led to the
recursive call to flatmap.Expand not matching any keys of the set, and
returning nil, which is why the above example has nothing where the IP
addresses used to be.
So we bring back that matching behavior, but we move it to expandArray
instead. We've modified it to not reconstruct the data structures like
it used to when it was in the Interpolator, and to use the standard int
sorter rather than implementing a custom sorter since a custom one is no
longer necessary thanks to the use of flatmap.Expand.
Fixes#10908, and restores the viability of the workaround I posted in #8696.
Big thanks to @jszwedko for helping me with this fix. I was able to
diagnose the problem along, but couldn't fix it without his help.
Fixes#10729
Destruction ordering wasn't taking into account ordering implied through
variables across module boundaries.
This is because to build the destruction ordering we create a
non-destruction graph to determine the _creation_ ordering (to properly
flip edges). This creation graph we create wasn't including module
variables. This PR adds that transform to the graph.
Fixes#10711
The `ModuleVariablesTransformer` only adds module variables in use. This
was missing module variables used by providers since we ran the provider
too late. This moves the transformer and adds a test for this.
Fixes#10680
This moves TargetsTransformer to run after the transforms that add
module variables is run. This makes targeting work across modules (test
added).
This is a bug that only exists in the new graph, but was caught by a
shadow error in #10680. Tests were added to protect against regressions.
If a data source has explicit dependencies in `depends_on`, we can
assume the user has added those because of a dependency not tracked
directly in the config. If there are any entries in `depends_on`, don't
apply the data source early during Refresh.
Fixes#4645
This is something that never worked (even in legacy graphs), but as we
push forward towards encouraging multi-provider usage especially with
things like the Vault data source, I want to make sure we have this
right for 0.8.
When you have a config like this:
```
resource "foo_type" "name" {}
provider "bar" { attr = "${foo_type.name.value}" }
resource "bar_type" "name" {}
```
Then the destruction ordering MUST be:
1. `bar_type`
2. `foo_type`
Since configuring the client for `bar_type` requires accessing data from
`foo_type`. Prior to this PR, these two would be done in parallel. This
properly pushes forward the dependency.
There are more cases I want to test but this is a basic case that is
fixed.
Fixes#8695
When a list count was computed in a multi-resource access
(foo.bar.*.list), we were returning the value as empty string. I don't
actually know the histocal reasoning for this but this can't be correct:
we must return unknown.
When changing this to unknown, the new tests passed and none of the old
tests failed. This leads me further to believe that the return empty
string is probably a holdover from long ago to just avoid crashes or
UUIDs in the plan output and not actually the correct behavior.
Related to #8036
We have had this behavior for a _long_ time now (since 0.7.0) but it
seems people are still periodically getting bit by it. This adds an
explicit error message that explains that this kind of override isn't
allowed anymore.
* "external" provider for gluing in external logic
This provider will become a bit of glue to help people interface external
programs with Terraform without writing a full Terraform provider.
It will be nowhere near as capable as a first-class provider, but is
intended as a light-touch way to integrate some pre-existing or custom
system into Terraform.
* Unit test for the "resourceProvider" utility function
This small function determines the dependable name of a provider for
a given resource name and optional provider alias. It's simple but it's
a key part of how resource nodes get connected to provider nodes so
worth specifying the intended behavior in the form of a test.
* Allow a provider to export a resource with the provider's name
If a provider only implements one resource of each type (managed vs. data)
then it can be reasonable for the resource names to exactly match the
provider name, if the provider name is descriptive enough for the
purpose of the each resource to be obvious.
* provider/external: data source
A data source that executes a child process, expecting it to support a
particular gateway protocol, and exports its result. This can be used as
a straightforward way to retrieve data from sources that Terraform
doesn't natively support..
* website: documentation for the "external" provider
Fixes#10440
This updates the behavior of "apply" resources to depend on the
destroy versions of their dependencies.
We make an exception to this behavior when the "apply" resource is CBD.
This is odd and not 100% correct, but it mimics the behavior of the
legacy graphs and avoids us having to do major core work to support the
100% correct solution.
I'll explain this in examples...
Given the following configuration:
resource "null_resource" "a" {
count = "${var.count}"
}
resource "null_resource" "b" {
triggers { key = "${join(",", null_resource.a.*.id)}" }
}
Assume we've successfully created this configuration with count = 2.
When going from count = 2 to count = 1, `null_resource.b` should wait
for `null_resource.a.1` to destroy.
If it doesn't, then it is a race: depending when we interpolate the
`triggers.key` attribute of `null_resource.b`, we may get 1 value or 2.
If `null_resource.a.1` is destroyed, we'll get 1. Otherwise, we'll get
2. This was the root cause of #10440
In the legacy graphs, `null_resource.b` would depend on the destruction
of any `null_resource.a` (orphans, tainted, anything!). This would
ensure proper ordering. We mimic that behavior here.
The difference is CBD. If `null_resource.b` has CBD enabled, then the
ordering **in the legacy graph** becomes:
1. null_resource.b (create)
2. null_resource.b (destroy)
3. null_resource.a (destroy)
In this case, the update would always have 2 values for `triggers.key`,
even though we were destroying a resource later! This scenario required
two `terraform apply` operations.
This is what the CBD check is for in this PR. We do this to mimic the
behavior of the legacy graph.
The correct solution to do one day is to allow splat references
(`null_resource.a.*.id`) to happen in parallel and only read up to to
the `count` amount in the state. This requires some fairly significant
work close to the 0.8 release date, so we can defer this to later and
adopt the 0.7.x behavior for now.
Init should only _add_ values, not remove them.
During graph execution, there are steps that expect that a state isn't
being actively pruned out from under it. Namely: writing deposed states.
Writing deposed states has no way to handle if a state changes
underneath it because the only way to uniquely identify a deposed state
is its index in the deposed array. When destroying deposed resources, we
set the value to `<nil>`. If the array is pruned before the next deposed
destroy, then the indexes have changed, and this can cause a crash.
This PR does the following (with more details below):
* `init()` no longer prunes.
* `ReadState()` always prunes before returning. I can't think of a
scenario where this is unsafe since generally we can always START
from a pruned state, its just causing problems to prune
mid-execution.
* Exported State APIs updated to be robust against nil ModuleStates.
Instead, I think we should adopt the following semantics for init/prune
in our structures that support it (Diff, for example). By having
consistent semantics around these functions, we can avoid this in the
future and have set expectations working with them.
* `init()` (in anything) will only ever be additive, and won't change
ordering or existing values. It won't remove values.
* `prune()` is destructive, expectedly.
* Functions on a structure must not assume a pruned structure 100% of
the time. They must be robust to handle nils. This is especially
important because in many cases values such as `Modules` in state
are exported so end users can simply modify them outside of the
exported APIs.
This PR may expose us to unknown crashes but I've tried to cover our
cases in exposed APIs by checking for nil.
Fixes#10439
When a CBD resource depends on a non-CBD resource, the non-CBD resource
is auto-promoted to CBD. This was done in
cf3a259. This PR makes it so that we
also set the config CBD to true. This causes the proper runtime
execution behavior to occur where we depose state and so on.
So in addition to simple graph edge tricks we also treat the non-CBD
resources as CBD resources.
Fixes#10412
The context wasn't properly adding variable values to the Interpolator
instance which made it so that the `console` command couldn't access
variables set via tfvars and the CLI.
This also adds better test coverage in command itself for this.
Fixes#10338
The destruction step for a resource was included the deposed resources
for _all_ resources with that name (ignoring the "index"). For example:
`aws_instance.foo.0` was including destroying deposed for
`aws_instance.foo.1`.
This changes the config to the deposed transformer to properly include
that index.
This change includes a larger change of changing `stateId` to include
the index. This affected more parts but was ultimately the issue in
question.
When referencing a list of maps variable from within a resource, only
the first list element is included the plan. This is because GetRaw
can't access the interpolated values. Add some tests to document this
behavior for both Get and GetRaw.
Fixes#10313
The new graph wasn't properly recording resource dependencies to a
specific index of itself. For example: `foo.bar.2` depending on
`foo.bar.0` wasn't shown in the state when it should've been.
This adds a test to verify this and fixes it.
ResourceAddr.Mode wasn't properly set when moving a module, so data
sources would lose the "data." prefix when their module was moved within
the State.
ResourceConfig.Get could previously return (nil, true) when looking up
an interpolated map in a list because of the indexing ambiguity. Make
sure we test that a non-existent value always returns false.
It makes for sense for this to happen in State.prune(). Also move a
redundant pruning from ResourceState.init, and make sure
ResourceState.prune is called from the parent's prune method.
Fixes a case where ResourceConfig.get inadvertently returns a nil value.
Add an integration test where assigning a map to a list via
interpolation would panic.
Setting variables happens before context validation, so it's possible
that the user could be trying to set an incorrect variable type to a
map. Return a useful error rather than panicking.
Ensure that each instance of BasucGraphBuilder gets a name corresponding
to the Builder which created it. This allows us to differentiate the
graphs in the logs.
This doesn't cause any practical issues as far as I'm aware (couldn't
get any test to fail), but caused shadow errors since it wasn't matching
the prior behavior.
Fixes#10122
The simple fix was that we forgot to close `ReadDataApply` for the
provider. But I've always felt that this section of the code was brittle
and I wanted to put in a more robust solution. The `shadow.Close` method
uses reflection to automatically close all values.
People with `uuid()` usage in their configurations would receive shadow
errors every time on plan because the UUID would change.
This is hacky fix but I also believe correct: if a shadow error contains
uuid() then we ignore the shadow error completely. This feels wrong but
I'll explain why it is likely right:
The "right" feeling solution is to create deterministic random output
across graph runs. This would require using math/rand and seeding it
with the same value each run. However, this alone probably won't work
due to Terraform's parallelism and potential to call uuid() in different
orders. In addition to this, you can't seed crypto/rand and its unlikely
that we'll NEVER use crypto/rand in the future even if we switched
uuid() to use math/rand.
Therefore, the solution is simple: if there is no shadow error, no
problem. If there is a shadow error and it contains uuid(), then ignore
it.
The method marks the start of a set of operations on the Graph, with
extra information optionally provided in the second paramter. This
returns a function with a single End method to mark the end of the set
in the logs.
Refactor the existing graph Begin/End Operation calls to use this single
method. Remove the *string types in the marshal structs, these are
strictly informational and don't need to differentiate empty vs unset
strings.
Add calls to DebugOperation for each step while building the graph.
To maintain the same output, the Graph.Dot implementation needs to be
aware of GraphNodeDotter. Copy the interface into the dag package, and
make the Dot marshaler aware of which nodes implemented the interface.
This way we can remove most of the remaining dot code from terraform.
The dot format generation was done with a mix of code from the terraform
package and the dot package. Unify the dot generation code, and it into
the dag package.
Use an intermediate structure to allow a dag.Graph to marshal itself
directly. This structure will be ablt to marshal directly to JSON, or be
translated to dot format. This was we can record more information about
the graph in the debug logs, and provide a way to translate those logged
structures to dot, which is convenient for viewing the graphs.
This fixes: `TestContext2Apply_moduleDestroyOrder`
The new destroy graph wasn't properly creating edges that happened
_through_ an output, it was only created the edges for _direct_
dependents.
To fix this, the DestroyEdgeTransformer now creates the full transitive
list of destroy edges by walking all ancestors. This will create more
edges than are necessary but also will no longer miss resources through
an output.
This will detect computed counts (which we don't currently support) and
change the error to be more informative that we don't allow computed
counts. Prior to this, the error would instead be something like
`strconv.ParseInt: "${var.foo}" cannot be parsed as int`.
This turns the new graphs on by default and puts the old graphs behind a
flag `-Xlegacy-graph`. This effectively inverts the current 0.7.x
behavior with the new graphs.
We've incubated most of these for a few weeks now. We've found issues
and we've fixed them and we've been using these graphs internally for
awhile without any major issue. Its time to default them on and get them
part of a beta.
Because we now rely on HIL to do the computed calculation, we must make
sure the type is correct (TypeUnknown). Before, we'd just check for the
UUID in the string.
This changes all variable returns in the interpolater to run it through
`hil.InterfaceToVariable` which handles this lookup for us.
This uses the new NodeApplyableProvider graph nodes. This will just make
it easier for us in the future to adopt new graph transforms by starting
to use the new ones here.
The primary change here is to expect that Config contains computed
values. This introduces `unknownCheckWalker` that does a really basic
reflectwalk to look for computed values and use that for IsComputed.
We had a weird mixture before checking whether c.Config was simply
missing values to determine where to look. Now we rely on IsComputed
heavily.
This makes all the computed stuff "just work" since HIL uses the same
computed sentinel value (string UUID) and the type differentiates it
from a regular string.
The map output from the module "mod" loses the computed value from the
template when we validate. If the "extra" field is removed from the map,
the validation fails earlier with map "does not have any elements so
cannot determine type".
Apply will work, because the computed value will exist in the map.
terraform: more specific resource references
terraform: outputs need to know about the new reference format
terraform: resources w/o a config still have a referencable name
This makes the old graph also prune orphan outputs in modules.
This will fix shadow graph errors such as #9905 since the old graph will
also behave correctly in these scenarios.
Luckily, because orphan outputs don't rely on anything, we were able to
simply use the same transformer!
Fixes#9920
This was an issue caught with the shadow graph. Self references in
provisioners were causing a self-edge on destroy apply graphs.
We need to explicitly check that we're not creating an edge to ourself.
This is also how the reference transformer works.
Fixes a shadow graph error found during usage.
The new apply graph was only adding module variables that referenced
data that existed _in the graph_. This isn't a valid optimization since
the data it is referencing may be in the state with no diff, and
therefore available but not in the graph.
This just removes that optimization logic, which causes no failing
tests. It also adds a test that exposes the bug if we had the pruning
logic.
Found via a shadow graph failure:
Provider aliases weren't being configured by the new apply graph.
This was caused by the transform that attaches configs to provider nodes
not being able to handle aliases and therefore not attaching a config.
Added a test to this and fixed it.
Fixes#9444
This appears to be a regression from 0.7.0, but there were no tests
covering it so we missed it and changed the behavior at some point! Oh
no.
This PR make the ordering of multi-var access: `resource.name.*.attr`
consistent: it is the ordering of the count, not the lexical ordering of
the value. This allows behavior where two lists are indexed by count
index and can be assumed to be related (for example user data for an aws
instance, as shown in the above referenced issue).
Two new context tests added to cover this case.
Implement debugInfo and the DebugGraph
DebugInfo will be a global variable through which graph debug
information can we written to a compressed archive. The DebugInfo
methods are all safe for concurrent use, and noop with a nil receiver.
The API outside of the terraform package will be to call SetDebugInfo
to create the archive, and CloseDebugInfo() to properly close the file.
Each write to the archive will be flushed and sync'ed individually, so
in the event of a crash or a missing call to Close, the archive can
still be recovered.
The DebugGraph is a representation of a terraform Graph to be written to
the debug archive, currently in dot format. The DebugGraph also contains
an internal buffer with Printf and Write methods to add to this buffer.
The buffer will be written to an accompanying file in the debug archive
along with the graph.
This also adds a GraphNodeDebugger interface. Any node implementing
`NodeDebug() string` can output information to annotate the debug graph
node, and add the data to the log. This interface may change or be
removed to provide richer options for debugging graph nodes.
The new graph builders all delegate the build to the BasicGraphBuilder.
Having a Name field lets us differentiate the actual builder
implementation in the debug graphs.
The graph transformation we implement around create_before_destroy
need to re-order all resources that depend on the create_before_destroy
resource. Up until now, we've requires that users mark all of these
resources as create_before_destroy. Data soruces however don't have a
lifecycle block for create_before_destroy, and could not be marked this
way.
This PR checks each DestroyNode that doesn't implement CreateBeforeDestroy
for any ancestors that do implement CreateBeforeDestroy. If there are
any, we inherit the behavior and re-order the graph as such.
Fixes#9840
The new apply graph wasn't properly nesting provisioners. This resulted
in reading the provisioners being nil on apply in the shadow graph which
caused the crash in the above issue.
The actual cause of this is that the new graphs we're moving towards do
not have any "flattening" (they are flat to begin with): all modules are
in the root graph from the beginning of construction versus building a
number of different graphs and flattening them. The transform that adds
the provisioners wasn't modified to handle already-flat graphs and so
was only adding provisioners to the root module, not children.
The change modifies the `MissingProvisionerTransformer` (primarily) to
support already-flat graphs and add provisioners for all module levels.
Tests are there to cover this as well.
**NOTE:** This PR focuses on fixing that specific issue. I'm going to follow up
this PR with another PR that is more focused on being robust against
crashing (more nil checks, recover() for shadow graph, etc.). In the
interest of focus and keeping a PR reviewable this focuses only on the
issue itself.
Fixes#7975
This changes the InputMode for the CLI to always be:
InputModeProvider | InputModeVar | InputModeVarUnset
Which means:
* Ask for provider variables
* Ask for user variables _that are not already set_
The change is the latter point. Before, we'd only ask for variables if
zero were given. This forces the user to either have no variables set
via the CLI, env vars, tfvars or ALL variables, but no in between. As
reported in #7975, this isn't expected behavior.
The new change makes is so that unset variables are always asked for.
Users can retain the previous behavior by setting `-input=false`. This
would ensure that variables set by external sources cover all cases.
For #9618, we added the ability to ignore old diffs that were computed
and removed (because the ultimate value ended up being the same). This
ended up breaking computed list/set logic.
The correct behavior, as is evident by how the other "skip" logics work,
is to set `ok = true` so that the remainder of the logic can run which
handles stuff such as computed lists and sets.
Fixes#6447
This ensures that all variables of type string are consistently
converted to a string value upon running Terraform.
The place this is done is in the `Variables()` call within the
`terraform` package. This is the function responsible for loading and
merging the variables from the various sources and seems ideal for
proper conversion to consistent values for various types. We actually
already had tests to this effect.
This also adds docs that talk about the fake-ish boolean variables
Terraform currently has and about how in future versions we'll likely
support them properly, which can cause BC issues so beware.
This was causing flaky behavior in our tests because `TF_VAR_x=""` is
actually a valid env var. For tests, we need to actually unset env vars
that haven't been set before.
Fixes#6327
Deposed instances weren't calling PostApply which was causing the counts
for what happened during `apply` to be wrong. This was a simple fix to
ensure we call that hook.
Fixes#5342
The dynamically expanded subgraph wasn't being validated so cycles
weren't being caught here and Terraform would just hang. This fixes
that.
Note that it may make sense to validate higher level when the graph is
expanded but there are certain cases we actually expect the graph to
potentially be invalid, so this seems safer for now.
Fixes#5826
The `prevent_destroy` lifecycle configuration was not being checked when
the count was decreased for a resource with a count. It was only
checking when attributes changed on pre-existing resources.
This fixes that.
Fixes#5338 (and I'm sure many others)
There is no use case for "simple" variables in Terraform at all so
anytime one is found it should be an error.
There is a _huge_ backwards incompatibility here that was not supposed
to be by design but I'm sure a lot of people are relying on: in the
`template_file` datasource, this bug allowed you to not escape your
interpolations and have the work. For example:
```
data "template_file" "foo" {
template = "${a}"
vars { a = 12 }
}
```
The above would work, but it shouldn't. The template should have to be
`"$${a}"` (to escape the interpolation).
Because of this BC, I recommend holding this until Terraform 0.8.0 and
documenting it carefully. As part of this PR, I've added some special
error message notes.
This creates a standard package and interface for defining, querying,
setting experiments (`-X` flags).
I expect we'll want to continue to introduce various features behind
experimental flags. I want to make doing this as easy as possible and I
want to make _removing_ experiments as easy as possible as well.
The goal with this packge has been to rely on the compiler enforcing our
experiment references as much as possible. This means that every
experiment is a global variable that must be referenced directly, so
when it is removed you'll get compiler errors where the experiment is
referenced.
This also unifies and makes it easy to grab CLI flags to enable/disable
experiments as well as env vars! This way defining an experiment is just
a couple lines of code (documented on the package).
Fixes#3309
There are two primary changes, one to how helper/schema creates diffs
and one to how Terraform compares diffs. Both require careful
understanding.
== 1. helper/schema Changes
helper/schema, given any primitive field (string, int, bool, etc.)
_used to_ create a basic diff when given a computed new value (i.e. from
an unkown interpolation). This would put in the plan that the old value
is whatever the old value was, and the new value was the actual
interpolation. For example, from #3309, the diff showed the following:
```
~ module.test.aws_eip.test-instance.0
instance: "<INSTANCE ID>" => "${element(aws_instance.test-instance.*.id, count.index)}"
```
Then, when running `apply`, the diff would be realized and you would get
a diff mismatch error because it would realize the final value is the
same and remove it from the diff.
**The change:** `helper/schema` now marks unknown primitive values with
`NewComputed` set to true. Semantically this is correct for the diff to
have this information.
== 2. Terraform Diff.Same Changes
Next, the way Terraform compares diffs needed to be updated
Specifically, the case where the diff from the plan had a NewComputed
primitive and the diff from the apply _no longer has that value_. This
is possible if the computed value ended up being the same as the old
value. This is allowed to pass through.
Together, these fix#3309.
This reverts commit c3a4cff133, reversing
changes made to 791a02e6e4.
This change requires plugin recompilation and we should hold off until a
minor release for that.
This enables the shadow graph since all tests pass!
We also change the destroy node to check the resource type using the
addr since that is always available and reliable. The configuration can
be nil for orphans.
This is necessary to get the shadow working properly with the destroy
graph since the destroy graph doesn't set this field but the end state
is still the same.
This is something that should be determined and done during an apply. It
doesn't make a lot of sense that the plan is doing it (in its current
form at least).
Since it is still very much possible for this to cause problems, this
can be used to disable the shadow graph. We'll purposely not document
this since the goal is to remove this flag as we become more confident
with it.
This enables the new apply graph's resource node to apply data sources.
Data sources appear to only be tested for "refresh" which is likely
where they're set but they've also been implemented (not my code, not
trying to edit code) within the "apply" operation as well.
This adds an apply test to ensure data sources work, and then modifies
the new apply node to support data sources.
It appears data sources have always been coded to work during apply, as
can be verified with this test (no impl. changes were necessary to make
it pass).
This test should be added to ensure our apply graph always works with
data sources as well.
This adds the proper logic for "disabling" providers to the new apply
graph: interolating and storing the config for inheritance but not
actually initializing and configuring the provider.
This is important since parent modules will often contain incomplete
provider configurations for the purpose of inheritance that would error
if they were actually attempted to be configured (since they're
incomplete). If the provider is not used, it should be "disabled".
This doesn't explicitly set `rs.Provider` on destroy nodes.
To be honest, I'm not sure why this was done in the first place (git
blame points to 6fda7bb5483a155b8ae1e1e4e4b7b7c4073bc1d9). Tests always
passed without it, and by adding it it causes other tests to fail. I
should've never changed those other tests.
Removing it now to get tests passing, this also reverts the test changes
made in 8213824962f085279810f04b60b95d1176a3a3f2.
This is a requirement for the parallelism of Terraform to work sanely.
We could deep copy every result but I think this would be unrealistic
and impose a performance cost when it isn't necessary in most cases.
Related to #5254
If the count of a resource is interpolated (i.e. `${var.c}`), then it
must be interpolated before any splat variable using that resource can
be used (i.e. `type.name.*.attr`). The original fix for #5254 is to
always ensure that this is the case.
While working on a new apply builder based on the diff in
`f-apply-builder`, this truth no longer always holds. Rather than always
include such a resource, I believe the correct behavior instead is to
use the state as a source of truth during `walkApply` operations.
This change specifically is scoped to `walkApply` operation
interpolations since we know the state of any multi-variable should be
available. The behavior is less clear for other operations so I left the
logic unchanged from prior versions.
The Deposed slice wasn't being normalized and nil values could be read
in from a state file. Filter out the nils during init. There is
still a bug in copystructure, but that will be addressed separately.
A nil InstanceState within State/Modules/Resources/Deposed will panic
during a deep copy. The panic needs to be fixed in copystructure, but
the nil probably should have been normalized out before we got here too.
There were races with ValidateResource in the provider initializing the
data which resulting in lost data for the shadow. A new "Init" function
has been added to the shadow structs to support safe concurrent
initialization.
This adds a new function to get a unique identifier scoped to the graph
walk in order to identify operations against the same instance. This is
used by the shadow to namespace provider function calls.
James Bardin