This check was accidentally typo'd in #396 from `%` to `&`. Restore the
correct functionality here (we want to do the check every "PromoteEvery"
count packets).
This is how Prometheus recommends you do it, and how they do it
themselves in their client. This makes it easy to see which versions you
have deployed in your fleet, and query over it too.
Currently, if you use the remote allow list config, as soon as you attempt to create a tunnel to a node that has a blocked IP address, a mutex is locked and never unlocked. This happens even if the node has an allowed remote IP address in addition to the blocked remote IP address.
This pull request ensures that the lighthouse mutex is unlocked whenever we attempt to add a remote IP.
The change for #401 incorrectly called HostInfo.ForcePromoteBest in
stage2, when we really we want to pick the remote that we received the
response from.
There are some subtle race conditions with the previous handshake_ix implementation, mostly around collisions with localIndexId. This change refactors it so that we have a "commit" phase during the handshake where we grab the lock for the hostmap and ensure that we have a unique local index before storing it. We also now avoid using the pending hostmap at all for receiving stage1 packets, since we have everything we need to just store the completed handshake.
Co-authored-by: Nate Brown <nbrown.us@gmail.com>
Co-authored-by: Ryan Huber <rhuber@gmail.com>
Co-authored-by: forfuncsake <drussell@slack-corp.com>
We missed this race with #396 (and I think this is also the crash in
issue #226). We need to lock a little higher in the getOrHandshake
method, before we reset hostinfo.ConnectionInfo. Previously, two
routines could enter this section and confuse the handshake process.
This could result in the other side sending a recv_error that also has
a race with setting hostinfo.ConnectionInfo back to nil. So we make sure
to grab the lock in handleRecvError as well.
Neither of these code paths are in the hot path (handling packets
between two hosts over an active tunnel) so there should be no
performance concerns.
* Do not allow someone to run a nebula lighthouse with an ephemeral port
* derp - we discover the port so we have to check the config setting
* No context needed for this error
* gofmt yourself
* Revert "gofmt yourself"
This reverts commit c01423498e3792f7acd69d7e691dce1edad81bcb.
* Revert "No context needed for this error"
This reverts commit 6792af6846d1200c564a4ad601a637535dd56c5b.
* snip snap snip snap
This change fixes all of the known data races that `make smoke-docker-race` finds, except for one.
Most of these races are around the handshake phase for a hostinfo, so we add a RWLock to the hostinfo and Lock during each of the handshake stages.
Some of the other races are around consistently using `atomic` around the `messageCounter` field. To make this harder to mess up, I have renamed the field to `atomicMessageCounter` (I also removed the unnecessary extra pointer deference as we can just point directly to the struct field).
The last remaining data race is around reading `ConnectionInfo.ready`, which is a boolean that is only written to once when the handshake has finished. Due to it being in the hot path for packets and the rare case that this could actually be an issue, holding off on fixing that one for now.
here is the results of `make smoke-docker-race`:
before:
lighthouse1: Found 2 data race(s)
host2: Found 36 data race(s)
host3: Found 17 data race(s)
host4: Found 31 data race(s)
after:
host2: Found 1 data race(s)
host4: Found 1 data race(s)
Fixes: #147Fixes: #226Fixes: #283Fixes: #316
Previously, every packet we see gets a lock on the conntrack table and updates it. When running with multiple routines, this can cause heavy lock contention and limit our ability for the threads to run independently. This change caches reads from the conntrack table for a very short period of time to reduce this lock contention. This cache will currently default to disabled unless you are running with multiple routines, in which case the default cache delay will be 1 second. This means that entries in the conntrack table may be up to 1 second out of date and remain in a routine local cache for up to 1 second longer than the global table.
Instead of calling time.Now() for every packet, this cache system relies on a tick thread that updates the current cache "version" each tick. Every packet we check if the cache version is out of date, and reset the cache if so.
We are currently seeing some cases where we are not deleting entries
correctly from the pending hostmap. I believe this is a case of
an inbound timer tick firing and deleting the Hosts map entry for
a newer handshake attempt than intended, thus leaving the old Indexes
entry orphaned. This change adds some extra checking when deleteing from
the Indexes and Hosts maps to ensure we clean everything up correctly.
This makes it easier to use the docker container smoke test that
GitHub actions runs. There is also `make smoke-docker-race` that runs the
smoke test with `-race` enabled.
This change allows a server running with `tun.disabled: true` (usually
a lighthouse) to still reply to ICMP EchoRequest packets. This allows
you to "ping" the lighthouse Nebula IP as a quick check to make sure the
tunnel is up, even when running with tun.disabled.
This is still gated by allowing `icmp` packets in the inbound firewall
rules.
This change is for Linux only.
Previously, when running with multiple tun.routines, we would only have one file descriptor. This change instead sets IFF_MULTI_QUEUE and opens a file descriptor for each routine. This allows us to process with multiple threads while preventing out of order packet reception issues.
To attempt to distribute the flows across the queues, we try to write to the tun/UDP queue that corresponds with the one we read from. So if we read a packet from tun queue "2", we will write the outgoing encrypted packet to UDP queue "2". Because of the nature of how multi queue works with flows, a given host tunnel will be sticky to a given routine (so if you try to performance benchmark by only using one tunnel between two hosts, you are only going to be using a max of one thread for each direction).
Because this system works much better when we can correlate flows between the tun and udp routines, we are deprecating the undocumented "tun.routines" and "listen.routines" parameters and introducing a new "routines" parameter that sets the value for both. If you use the old undocumented parameters, the max of the values will be used and a warning logged.
Co-authored-by: Nate Brown <nbrown.us@gmail.com>
The change introduced by #320 incorrectly re-uses the output buffer for
sending punchBack packets. Since we are currently spawning a new
goroutine for each send here, we need to allocate a new buffer each
time. We can come back and optimize this in the future, but for now we
should fix the regression.
This change adds an index based on HostInfo.remoteIndexId. This allows
us to use HostMap.QueryReverseIndex without having to loop over all
entries in the map (this can be a bottleneck under high traffic
lighthouses).
Without this patch, a high traffic lighthouse server receiving recv_error
packets and lots of handshakes, cpu pprof trace can look like this:
flat flat% sum% cum cum%
2000ms 32.26% 32.26% 3040ms 49.03% github.com/slackhq/nebula.(*HostMap).QueryReverseIndex
870ms 14.03% 46.29% 1060ms 17.10% runtime.mapiternext
Which shows 50% of total cpu time is being spent in QueryReverseIndex.
We noticed that the number of memory allocations LightHouse.HandleRequest creates for each call can seriously impact performance for high traffic lighthouses. This PR introduces a benchmark in the first commit and then optimizes memory usage by creating a LightHouseHandler struct. This struct allows us to re-use memory between each lighthouse request (one instance per UDP listener go-routine).
Packet 1 is always a stage 1 handshake and packet 2 is always stage 2.
Normal packets don't start flowing until the message counter is 3 or
higher.
Currently we only receive either packet 1 or 2 depending on if
we are the initiator or responder for the handshake, so we end up
marking one of these as "lost". We should mark these packets as "seen"
when we are the one sending them, since we don't expect to see them from
the other side.
During shutdown, this will keep Nebula alive until after sshd is finished. This cleanly terminates ssh clients accessing a server over a Nebula tunnel.
* this brings in the new version of kardianos/service which properly
outputs logs from launchd services
* add go sum
* is it really this easy?
* Update CHANGELOG.md
Port 22 is blocked as a safety mechanism. In a case where nebula is
started before sshd, a system may be rendered unreachable if nebula
is holding the system ssh port and there is no other connectivity.
This commit enforces the restriction, which could previously be worked
around by listening on an IPv6 address, e.g. "[::]:22".
* Remove unused (*udpConn).Read method
* Align linux UDP performance optimizations with configuration
While attempting to run nebula on an older Synology NAS, it became
apparent that some of the performance optimizations effectively
block support for older kernels. The recvmmsg syscall was added in
linux kernel 2.6.33, and the Synology DS212j (among other models)
is pinned to 2.6.32.12.
Similarly, SO_REUSEPORT was added to the kernel in the 3.9 cycle.
While this option has been backported into some older trees, it
is also missing from the Synology kernel.
This commit allows nebula to be run on linux devices with older
kernels if the config options are set up with a single listener
and a UDP batch size of 1.
This commit adds support for Nebula to be started without creating
a tun device. A node started in this mode still has a full "control
plane", but no effective "data plane". Its use is suited to a
lighthouse that has no need to partake in the mesh VPN.
Consequently, creation of the tun device is the only reason nebula
neesd to be started with elevated privileged, so this example
lighthouse can also be run as a non-root user.
Nathan Brown