terraform/website/docs/cli/commands/plan.html.md

16 KiB

layout page_title sidebar_current description
docs Command: plan docs-commands-plan The terraform plan command creates an execution plan.

Command: plan

Hands-on: Try the Terraform: Get Started collection on HashiCorp Learn.

The terraform plan command creates an execution plan. By default, creating a plan consists of:

  • Reading the current state of any already-existing remote objects to make sure that the Terraform state is up-to-date.
  • Comparing the current configuration to the prior state and noting any differences.
  • Proposing a set of change actions that should, if applied, make the remote objects match the configuration.

The plan command alone will not actually carry out the proposed changes, and so you can use this command to check whether the proposed changes match what you expected before you apply the changes or share your changes with your team for broader review.

If Terraform detects that no changes are needed to resource instances or to root module output values, terraform plan will report that no actions need to be taken.

If you are using Terraform directly in an interactive terminal and you expect to apply the changes Terraform proposes, you can alternatively run terraform apply directly. By default, the "apply" command automatically generates a new plan and prompts for you to approve it.

You can use the optional -out=FILE option to save the generated plan to a file on disk, which you can later execute by passing the file to terraform apply as an extra argument. This two-step workflow is primarily intended for when running Terraform in automation.

If you run terraform plan without the -out=FILE option then it will create a speculative plan, which is a description of the effect of the plan but without any intent to actually apply it.

In teams that use a version control and code review workflow for making changes to real infrastructure, developers can use speculative plans to verify the effect of their changes before submitting them for code review. However, it's important to consider that other changes made to the target system in the meantime might cause the final effect of a configuration change to be different than what an earlier speculative plan indicated, so you should always re-check the final non-speculative plan before applying to make sure that it still matches your intent.

Usage

Usage: terraform plan [options]

The plan subcommand looks in the current working directory for the root module configuration.

Because the plan command is one of the main commands of Terraform, it has a variety of different options, described in the following sections. However, most of the time you should not need to set any of these options, because a Terraform configuration should typically be designed to work with no special additional options for routine work.

The remaining sections on this page describe the various options:

  • Planning Modes: There are some special alternative planning modes that you can use for some special situations where your goal is not just to change the remote system to match your configuration.
  • Planning Options: Alongside the special planning modes, there are also some options you can set in order to customize the planning process for unusual needs.
    • Resource Targeting is one particular special planning option that has some important caveats associated with it.
  • Other Options: These change the behavior of the planning command itself, rather than customizing the content of the generated plan.

Planning Modes

The section above described Terraform's default planning behavior, which is intended for changing the remote system to match with changes you've made to your configuration.

Terraform has two alternative planning modes, each of which creates a plan with a different intended outcome:

  • Destroy mode: creates a plan whose goal is to destroy all remote objects that currently exist, leaving an empty Terraform state. This can be useful for situations like transient development environments, where the managed objects cease to be useful once the development task is complete.

    Activate destroy mode using the -destroy command line option.

  • Refresh-only mode: creates a plan whose goal is only to update the Terraform state and any root module output values to match changes made to remote objects outside of Terraform. This can be useful if you've intentionally changed one or more remote objects outside of the usual workflow (e.g. while responding to an incident) and you now need to reconcile Terraform's records with those changes.

    Activate refresh-only mode using the -refresh-only command line option.

In situations where we need to discuss the default planning mode that Terraform uses when none of the alternative modes are selected, we refer to it as "Normal mode". Because these alternative modes are for specialized situations only, some other Terraform documentation only discusses the normal planning mode.

The planning modes are all mutually-exclusive, so activating any non-default planning mode disables the "normal" planning mode, and you can't use more than one alternative mode at the same time.

-> Note: In Terraform v0.15 and earlier, the -destroy option is supported only by the terraform plan command, and not by the terraform apply command. To create and apply a plan in destroy mode in earlier versions you must run terraform destroy.

-> Note: The -refresh-only option is available only in Terraform v0.15.4 and later.

Planning Options

In addition to the planning modes described above, there are also several additional options that can modify details of the behavior of the planning step.

When you use terraform apply without passing it a saved plan file, it incorporates the terraform plan command functionality and so the planning options in this section, along with the planning mode selection options in the previous section, are also available with the same meanings on terraform apply.

  • -refresh=false - Disables the default behavior of synchronizing the Terraform state with remote objects before checking for configuration changes.

    This option can potentially make the planning operation faster by reducing the number of remote API requests, but it comes at the expense of having Terraform not take into account any changes that might've happened outside of Terraform, and thus the resulting plan may not be complete or correct.

    This option is not available in the "refresh only" planning mode, because it would effectively disable the entirety of the planning operation in that case.

  • -replace=ADDRESS - Instructs Terraform to plan to replace the single resource instance with the given address. If the given instance would normally have caused only an "update" action, or no action at all, then Terraform will choose a "replace" action instead.

    You can use this option if you have learned that a particular remote object has become degraded in some way. If you are using immutable infrastructure patterns then you may wish to respond to that by replacing the malfunctioning object with a new object that has the same configuration.

    This option is allowed only in the normal planning mode, so this option is incompatible with the -destroy option.

    The -replace=... option is available only from Terraform v0.15.2 onwards. For earlier versions, you can achieve a similar effect (with some caveats) using terraform taint.

  • -target=ADDRESS - Instructs Terraform to focus its planning efforts only on resource instances which match the given address and on any objects that those instances depend on.

    This command is for exceptional use only. See Resource Targeting below for more information.

  • -var 'NAME=VALUE - Sets a value for a single input variable declared in the root module of the configuration. Use this option multiple times to set more than one variable.

  • -var-file=FILENAME - Sets values for potentially many input variables declared in the root module of the configuration, using definitions from a "tfvars" file. Use this option multiple times to include values from more than one file.

There are several other ways to set values for input variables in the root module, aside from the -var and -var-file options. For more information, see Assigning Values to Root Module Variables.

Resource Targeting

Hands-on: Try the Target resources tutorial on HashiCorp Learn.

You can use the -target option to focus Terraform's attention on only a subset of resources. You can use resource address syntax to specify the constraint. Terraform interprets the resource address as follows:

  • If the given address identifies one specific resource instance, Terraform will select that instance alone. For resources with either count or for_each set, a resource instance address must include the instance index part, like aws_instance.example[0].

  • If the given address identifies a resource as a whole, Terraform will select all of the instances of that resource. For resources with either count or for_each set, this means selecting all instance indexes currently associated with that resource. For single-instance resources (without either count or for_each), the resource address and the resource instance address are identical, so this possibility does not apply.

  • If the given address identifies an entire module instance, Terraform will select all instances of all resources that belong to that module instance and all of its child module instances.

Once Terraform has selected one or more resource instances that you've directly targeted, it will also then extend the selection to include all other objects that those selections depend on either directly or indirectly.

This targeting capability is provided for exceptional circumstances, such as recovering from mistakes or working around Terraform limitations. It is not recommended to use -target for routine operations, since this can lead to undetected configuration drift and confusion about how the true state of resources relates to configuration.

Instead of using -target as a means to operate on isolated portions of very large configurations, prefer instead to break large configurations into several smaller configurations that can each be independently applied. Data sources can be used to access information about resources created in other configurations, allowing a complex system architecture to be broken down into more manageable parts that can be updated independently.

Other Options

The terraform plan command also has some other options that are related to the input and output of the planning command, rather than customizing what sort of plan Terraform will create. These commands are not necessarily also available on terraform apply, unless otherwise stated in the documentation for that command.

The available options are:

  • -compact-warnings - Shows any warning messages in a compact form which includes only the summary messages, unless the warnings are accompanied by at least one error and thus the warning text might be useful context for the errors.

  • -detailed-exitcode - Returns a detailed exit code when the command exits. When provided, this argument changes the exit codes and their meanings to provide more granular information about what the resulting plan contains:

    • 0 = Succeeded with empty diff (no changes)
    • 1 = Error
    • 2 = Succeeded with non-empty diff (changes present)
  • -input=false - Disables Terraform's default behavior of prompting for input for root module input variables that have not otherwise been assigned a value. This option is particularly useful when running Terraform in non-interactive automation systems.

  • -json - Enables the machine readable JSON UI output. This implies -input=false, so the configuration must have no unassigned variable values to continue.

  • -lock=false - Don't hold a state lock during the operation. This is dangerous if others might concurrently run commands against the same workspace.

  • -lock-timeout=DURATION - Unless locking is disabled with -lock=false, instructs Terraform to retry acquiring a lock for a period of time before returning an error. The duration syntax is a number followed by a time unit letter, such as "3s" for three seconds.

  • -no-color - Disables terminal formatting sequences in the output. Use this if you are running Terraform in a context where its output will be rendered by a system that cannot interpret terminal formatting.

  • -out=FILENAME - Writes the generated plan to the given filename in an opaque file format that you can later pass to terraform apply to execute the planned changes, and to some other Terraform commands that can work with saved plan files.

    Terraform will allow any filename for the plan file, but a typical convention is to name it tfplan. Do not name the file with a suffix that Terraform recognizes as another file format; if you use a .tf suffix then Terraform will try to interpret the file as a configuration source file, which will then cause syntax errors for subsequent commands.

    The generated file is not in any standard format intended for consumption by other software, but the file does contain your full configuration, all of the values associated with planned changes, and all of the plan options including the input variables. If your plan includes any sort of sensitive data, even if obscured in Terraform's terminal output, it will be saved in cleartext in the plan file. You should therefore treat any saved plan files as potentially-sensitive artifacts.

  • -parallelism=n - Limit the number of concurrent operations as Terraform walks the graph. Defaults to 10.

For configurations using the local backend only, terraform plan accepts the legacy command line option -state.

Passing a Different Configuration Directory

Terraform v0.13 and earlier accepted an additional positional argument giving a directory path, in which case Terraform would use that directory as the root module instead of the current working directory.

That usage was deprecated in Terraform v0.14 and removed in Terraform v0.15. If your workflow relies on overriding the root module directory, use the -chdir global option instead, which works across all commands and makes Terraform consistently look in the given directory for all files it would normally read or write in the current working directory.

If your previous use of this legacy pattern was also relying on Terraform writing the .terraform subdirectory into the current working directory even though the root module directory was overridden, use the TF_DATA_DIR environment variable to direct Terraform to write the .terraform directory to a location other than the current working directory.