NodeDestroyResource does not require a provider, and to avoid this a
temporary GraphNodeNoProvider was used to differentiate it from other
resource nodes. We can now de-couple the destroy node from the abstract
resource which was adding the ProvidedBy method, and remove the
NoProvider method.
Remove the shims where they aren't necessary from the Init and Close
provider nodes. This also removed some provider path checks from the
builtin eval context, which cannot be resolved since the context may not
be created with a ModuleInstance path.
* terraform: large refactor to use Provider from configs.Resource
configs.Resource.ImpliedProvider() now returns a string; it is the
callers' responsibility to turn that into an addrs.Provider if needed.
GraphNodeProviderConsumer ProvidedBy() no longer returns nil (reverting
to earlier, pre-provider-fqn behavior): it will return either the
provider set in config, provider set in state, or the default provider.
* add Config to AttachSchemaTransformer for providerFqn lookup
* terraform: refactor ProvidedBy() to return nil when provider is not set
in config or state
* terraform: refactor ProvidedBy() to return an addrs.ProviderConfig
interface
This refactor allows terraform to indicate whether a specific provider
configuration was found for the resource or if it is instead returning
the assumed default.
With that additional information the provider transformer can check if
there is a specific (non-default) provider FQN.
configs.Module is accessible.
Continuing the work of removing all calls to addrs.NewLegacyProvider,
this commit uses configs.Module.ProviderForLocalConfig wherever the
caller has access to that Module.
Added configs.Module.ProviderForLocalProviderConfig which allows
terraform.ProviderTransformer to get the provider FQN from the module,
instead of assuming NewLegacyProvider.
* fix outdated syntax in comments
* test for non-strings in ParseAbsProviderConfig
* ProviderConfigDefault and ProviderConfigAliased now take Providers
instead of strings
a large refactor to addrs.AbsProviderConfig, embedding the addrs.Provider instead of a Type string. I've added and updated tests, added some Legacy functions to support older state formats and shims, and added a normalization step when reading v4 (current) state files (not the added tests under states/statefile/roundtrip which work with both current and legacy-style AbsProviderConfig strings).
The remaining 'fixme' and 'todo' comments are mostly going to be addressed in a subsequent PR and involve looking up a given local provider config's FQN. This is fine for now as we are only working with default assumption.
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
While the NodeDestroyResource type should not be a
GraphNodeProviderConsumer, we're going to avoid uncovering more hidden
behavior by explicitly skipping provider creation and connections in the
provider transformers.
This should be removed when more in-depth testing can be done during a
major release cycle.
* huge change to weave new addrs.Provider into addrs.ProviderConfig
* terraform: do not include an empty string in the returned Providers /
Provisioners
- Fixed a minor bug where results included an extra empty string
Previously we were using the experimental HCL 2 repository, but now we'll
shift over to the v2 import path within the main HCL repository as part of
actually releasing HCL 2.0 as stable.
This is a mechanical search/replace to the new import paths. It also
switches to the v2.0.0 release of HCL, which includes some new code that
Terraform didn't previously have but should not change any behavior that
matters for Terraform's purposes.
For the moment the experimental HCL2 repository is still an indirect
dependency via terraform-config-inspect, so it remains in our go.sum and
vendor directories for the moment. Because terraform-config-inspect uses
a much smaller subset of the HCL2 functionality, this does still manage
to prune the vendor directory a little. A subsequent release of
terraform-config-inspect should allow us to completely remove that old
repository in a future commit.
This error message appears in a situation that is often confusing for
users, since the connection between resources and their providers in the
state is not something we draw attention to in the user experience of
Terraform.
This new error message tries to be a bit clearer about what the user must
do to resolve it. It's still not perfect since it doesn't cover the
variant of this problem where an entire module containing a provider block
and resources has been removed at the same time, but since there isn't
an easily-summarizable way to continue in that state this will need to
do for the moment, until we find a way to file off that rough edge in
the workflow.
Configuration blocks can contain sensitive information, so better to just
talk about them by reference (in this case, source location) rather than
embedding them directly, to reduce the risk of accidental information
leakage through sharing logs for debug purposes.
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.
The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.
The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.
Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
The prior commit changed the schema-access model so that all schemas are
fetched up front during context creation and are then readily available
for use throughout graph building and evaluation.
As a result, we no longer need to create dependency edges to a provider
when one of its resources is referenced by another node, and so the
ProviderTransformer needs only to worry about direct ownership
dependencies.
This also avoids the need for us to run AttachSchemaTransformer twice,
since ProviderTransformer no longer needs schema and we can therefore
defer attaching until just before ReferenceTransformer, when all of the
referencable and referencing nodes are already present in the graph.
Previously we'd create the stub provider in any case where we didn't need
a configured provider, but we also need to skip creating it if there's
already a provider node present, or else we can end up with multiple
stub nodes in the graph.
The provider schema cache is keyed by provider configuration address
rather than provider type, so we need to do the same inheritance logic
to resolve providers needed because of reference as we do for providers
needed for direct use.
This allows resources that override "provider" or resources in child
modules that have their own provider configurations to be associated
with the provider config they will eventually get schema from, rather
than (as before) always the default configuration for the provider in
the root module.
Eventually it'd probably be better to switch to using a provider cache
that is keyed by provider _type_ rather than provider config, but since
it's currently fetched by visiting the individual provider graph nodes
we currently visit each provider configuration separately and fetch a
schema for each.
Any non-resource (outputs, variables, locals) that references a resource
type must also be connected to that resources provider. This is required
during apply, because the graph built from the diff may not include the
referenced resources because they are being evaluated from the state.
If the provider isn't present already, add a NodeEvalableProvider to
fetch the provider schema.
The provider transformers now need to happen after the outputs, locals,
and variables are transformed.
The final "<resource> provided by <provider>" message was showing the
original selection made by the resource itself rather than the provider
address finally resolved after inheritance, which caused the log to
misrepresent what was actually being created in the graph.
The prior implementation of this function (before the rewrite to use
addrs.AbsProviderConfig values) was relying on some implicit behavior of
our provider address normalization to generate an address in the root
module. Since that wasn't explicit, I introduced a bug here when
introducing the new address type, where I generated an address in the
node's own module, rather than in the root as expected.
This new implementation is functionally equivalent to the prior, but is
written to make the intent more obvious: take _just_ the type from the
node's provider address and create an implicit configuration for it
_in the root module_.
Along with the change in approach, this new implementation also has an
updated documentation comment that better describes its current intent
(previously it was outdated) and hopefully clearer trace logging to
better communicate what it's doing.
In the change to using addrs types rather than string keys directly here
I incorrectly made this use the _relative_ provider config instead of
the absolute one, causing MissingProviderTransformer to only match
providers defined in the root module (due to ambiguity in the string
representations of these address types).
The rest of this change is improved logging and test output that helped
with debugging this issue.
Some of the objects that are referencable from expressions are transient
values computed only during a graph walk, and not persisted in state. In
order to support arbitrary evaluation of expressions, such as in the
"terraform console" CLI command, it's necessary to be able to evaluate
these values before we start evaluating.
This new Eval method achieves this by performing a special graph walk that
ignores resources (except for dependency resolution) and just focuses on
evaluating all of these transient values, before returning an evaluation
scope that can then resolve expressions in terms of that result.
This replaces the Context.Interpolator method, which was fraught with
various issues due to it not properly priming the state before evaluating.
Due to a logic error here we were trying to find our our module's parent
as a descendent of itself, rather than as a descendent of the root. It
turns out that we can do this even more simply by just accessing the
Parent field on the given config, avoiding the need to traverse the tree
down from the root at all.
While here, this also switches to using the path.Call helper method rather
than manually slicing the path array, since this better communicates our
intent.
Due to how deeply the configuration types go into Terraform Core, there
isn't a great way to switch out to HCL2 gradually. As a consequence, this
huge commit gets us from the old state to a _compilable_ new state, but
does not yet attempt to fix any tests and has a number of known missing
parts and bugs. We will continue to iterate on this in forthcoming
commits, heading back towards passing tests and making Terraform
fully-functional again.
The three main goals here are:
- Use the configuration models from the "configs" package instead of the
older models in the "config" package, which is now deprecated and
preserved only to help us write our migration tool.
- Do expression inspection and evaluation using the functionality of the
new "lang" package, instead of the Interpolator type and related
functionality in the main "terraform" package.
- Represent addresses of various objects using types in the addrs package,
rather than hand-constructed strings. This is not critical to support
the above, but was a big help during the implementation of these other
points since it made it much more explicit what kind of address is
expected in each context.
Since our new packages are built to accommodate some future planned
features that are not yet implemented (e.g. the "for_each" argument on
resources, "count"/"for_each" on modules), and since there's still a fair
amount of functionality still using old-style APIs, there is a moderate
amount of shimming here to connect new assumptions with old, hopefully in
a way that makes it easier to find and eliminate these shims later.
I apologize in advance to the person who inevitably just found this huge
commit while spelunking through the commit history.
The provider name coming from ProvidedBy may be resolved if it only
exists in the state. Make sure to strip the module and provider
prefixes for the provider name when adding missing providers.
It's become apparent that passing in a provider config for an implicitly
used provider would be very useful. While the ProviderConfigTransformer
efficiently added providers to the graph, the algorithm was reversed
from what would be needed to allow overriding implicit providers.
Change the ProviderConfigTransformer to fist add all configured
provider, even if they are empty stubs. Then run through all providers
being passed in from the parent, and replace the provider nodes we
created with proxies, and add implicit proxies where none existed. The
extra nodes will then be pruned later.
Our new resource-to-provider matching is stricter about explicitly
matching aliases when config is present (no longer automatically
inherited) and with locating providers to destroy removed resources.
With this in mind, this is an attempt to expand slightly on this error
message now that users are more likely to see it.
In future it would be nice to do some explicit validation of this a bit
closer to the UI, so we can have room for more explanatory text, but this
additional messaging is intended to help users understand why they might
be seeing this message after removing a provider configuration block from
configuration, whether directly or as a side-effect of removing a module.
Use the ResourceState.Provider field to store the full name of the
provider used during apply. This field is only used when a resource is
removed from the config, and will allow that resource to be removed by
the exact same provider with which it was created.
Modify the locations which might accept the alue of the
ResourceState.Provider field to detect that the name is resolved.
Here we complete the passing of providers between modules via the
module/providers configuration, add another test and update broken test
outputs.
The DisbableProviderTransformer is being removed, since it was really
only for provider configuration inheritance. Since configuration is no
longer inherited, there's no need to keep around unused providers. The
actually shouldn't be any unused providers going into the graph any
longer, but put off verifying that condition for later. Replace it's
usage with the PruneProviderTransformer, and use that to also remove the
unneeded proxy provider nodes.
Implement the adding of provider through the module/providers map in the
configuration.
The way this works is that we start walking the module tree from the
top, and for any instance of a provider that can accept a configuration
through the parent's module/provider map, we add a proxy node that
provides the real name and a pointer to the actual parent provider node.
Multiple proxies can be chained back to the original provider. When
connecting resources to providers, if that provider is a proxy, we can
then connect the resource directly to the proxied node. The proxies are
later removed by the DisabledProviderTransformer.
This should re-instate the 0.11 beta inheritance behavior, but will
allow us to later store the actual concrete provider used by a resource,
so that it can be re-connected if it's orphaned by removing its module
configuration.
A missing provider alias should not be implicitly added to the graph.
Run the AttachaProviderConfigTransformer immediately after adding the
providers, since the ProviderConfigTransformer should have just added
these nodes.
We can remove the AllowAny option which is no longer used, and providers
don't need to be connected to their resources at this stage, since that
will happen in the ProviderTransformer.
Simplify the MissingProviderTransformer so that it only adds missing
providers at the root level. There's no need for the multitple providers
added at every level of the path
ParentProviderTransformer then only needs to connect providers with the
equivalent type at the root level.
James Bardin