Example addons_config was supposed to show how to disable addons (http_load_balancing and horizontal_pod_autoscaling), but it was enabling them instead.
panic on the Read func
Fixes#8995
The Diagnostics profile was a badly laid out resource. All we needed to
set was whether it was enabled and the storage account to save the logs
to. The old schema parameter was deprecated and replaced with a much
simplier structure
```
% make testacc TEST=./builtin/providers/azurerm TESTARGS='-run=TestAccAzureRMVirtualMachine_diagnosticsProfile'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/29 12:21:04 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/azurerm -v
-run=TestAccAzureRMVirtualMachine_diagnosticsProfile -timeout 120m
=== RUN TestAccAzureRMVirtualMachine_diagnosticsProfile
--- PASS: TestAccAzureRMVirtualMachine_diagnosticsProfile (1066.76s)
PASS
ok
github.com/hashicorp/terraform/builtin/providers/azurerm1066.776s
```
This adds a note in the `aws_iam_policy_document` documentation that
`resources` is required by AWS if used on an IAM policy. Also added a
note on `aws_iam_policy` that `aws_iam_policy_document` is a good thing
to use when configuring.
Closes#9002
This allows Storage Service Encryption to be enabled.
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMStorageAccount -timeout 120m
=== RUN TestAccAzureRMStorageAccount_importBasic
--- PASS: TestAccAzureRMStorageAccount_importBasic (139.00s)
=== RUN TestAccAzureRMStorageAccount_basic
--- PASS: TestAccAzureRMStorageAccount_basic (151.03s)
=== RUN TestAccAzureRMStorageAccount_blobEncryption
--- PASS: TestAccAzureRMStorageAccount_blobEncryption (149.94s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 440.051s
This commit adds a new HTTP method to a list of valid HTTP methods which
is now accepted by API Gateway.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
A default authorization rule is created by Azure which, if present is exported by
the resource.
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMServiceBusNamespace -timeout 120m
=== RUN TestAccAzureRMServiceBusNamespaceCapacity_validation
--- PASS: TestAccAzureRMServiceBusNamespaceCapacity_validation (0.00s)
=== RUN TestAccAzureRMServiceBusNamespaceSku_validation
--- PASS: TestAccAzureRMServiceBusNamespaceSku_validation (0.00s)
=== RUN TestAccAzureRMServiceBusNamespace_basic
--- PASS: TestAccAzureRMServiceBusNamespace_basic (352.03s)
=== RUN TestAccAzureRMServiceBusNamespace_readDefaultKeys
--- PASS: TestAccAzureRMServiceBusNamespace_readDefaultKeys (349.17s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 701.278s
use us-west-2 region in tests
update test with working config
provider/aws: Update EMR contribution with passing test, polling for instance in DELETE method
remove defaulted role
document emr_cluster
rename aws_emr -> aws_emr_cluster
update docs for name change
update delete timeout/polling
rename emr taskgroup to emr instance group
default instance group count to 0, down from 60
update to ref emr_cluster, emr_instance_group
more cleanups for instance groups; need to read and update
add read, delete method for instance groups
refactor the read method to seperate out the fetching of the specific group
more refactoring for finding instance groups
update emr instance group docs
err check on reading HTTP. Dont' return the error, just log it
refactor the create method to catch optionals
additional cleanups, added a read method
update test to be non-master-only
wrap up the READ method for clusters
poll for instance group to be running after a modification
patch up a possible deref
provider/aws: EMR cleanups
fix test naming
remove outdated docs
randomize emr_profile names
Fixes#9194
Removes the validation for the types and adds an acceptance test to make
sure we get a successful Sql Database created
```
% make testacc TEST=./builtin/providers/azurerm TESTARGS='-run=TestAccAzureRMSqlDatabase_datawarehouse'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/03 21:57:16 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/azurerm -v
-run=TestAccAzureRMSqlDatabase_datawarehouse -timeout 120m
=== RUN TestAccAzureRMSqlDatabase_datawarehouse
--- PASS: TestAccAzureRMSqlDatabase_datawarehouse (307.95s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm307.963s
```
* Parameter is Objective, not Object
* Clarify what resource group needs to be used
* Name paramter is the database name
* Link to Azure docs for SQL Database Tiers/Editions/Size limits
The primary purpose of this data source is to ask the question "what is
my current region?", but it can also be used to retrieve the endpoint
hostname for a particular (possibly non-current) region, should that be
useful for some esoteric case.
This adds a singular data source in addition to the existing plural one.
This allows retrieving data about a specific AZ.
As a helper for writing reusable modules, the AZ letter (without its
usual region name prefix) is exposed so that it can be used in
region-agnostic mappings where a different value is used per AZ, such as
for subnet numbering schemes.
In c244e5a6 this resource was converted to a data source, but that was
a mistake since data sources are expected to produce stable results on
each run, and yet certificate requests contain a random nonce as part of
the signature.
Additionally, using the data source as a managed resource through the
provided compatibility shim was not actually working, since "Read" was
trying to parse the private key out of a SHA1 hash of the key, which is
what we place in state due to the StateFunc on that attribute.
By restoring this we restore Terraform's ability to produce all of the
parts of a basic PKI/CA, which is useful for creating dev environments
and bootstrapping PKI for production environments.
Looks like AWS updated their API and now our tests are failing
because QueryStringCacheKeys was not included in the distribution
configuration.
This adds support for specifying query string cache keys in the
CloudFront distribution configuration, which ensures that only a subset
of query string keys are actually cached when forwarding query strings,
possibly improving performance.
Added http_version to aws_cloudfront_distribution, which allows
selection of the maximum HTTP version to use in the distribution.
Defaults to http2.
Fixeshashicorp/terraform#8730.
* provider/aws: Fix importing of EIP by IP address
EIPs are meant to be imported by their allocation id, however, importing
by their EIP *appears* to work because this API actually accepts IP
lookup, despite the documentation asking for the allocation id.
This PR does:
- update docs on how to import EIPs
- fix case if user imported by IP, to switch to using the alloc id for
the resource id
I chose not to document that looking up by IP is a method of import,
because the AWS API docs do not explicitly say that looking up by IP is
OK, so I'd rather people not do it if it's not documented to stay that
way.
Alternatively, we could parse the resource ID and reject it (remove from
state with error/warning) if it doesn't match the `eipalloc-*` format,
but I thought this was a bit better UX.
* fix issue with swapping IDs on EC2 Classic
* update docs
* update comment
Based on support case with AWS, CloudWatch Events invoking Lambda should also specify the `source_arn`
Example, the resulting policy needs to be like:
```
{
"Condition": {
"ArnLike": {
"AWS:SourceArn": "arn:aws:events:us-east-1:0123456789:rule/my-cloudwatch-events-rule"
}
},
"Action": "lambda:InvokeFunction",
"Resource": "arn:aws:lambda:us-east-1:0123456789:function:my-lambda-function",
"Effect": "Allow",
"Principal": {
"Service": "events.amazonaws.com"
},
"Sid": "AllowMyCloudWatchEventRuleToCallMyLambda"
}
```
aws_alb_target_group will ForceNew resource
Fixes#8741
The modify-target-group doesn't allow changes to name, port, protocol or
vpc_id - therefore, they should all be ForceNew: true
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALBTargetGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/22 16:04:29 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSALBTargetGroup_ -timeout 120m
=== RUN TestAccAWSALBTargetGroup_basic
--- PASS: TestAccAWSALBTargetGroup_basic (50.66s)
=== RUN TestAccAWSALBTargetGroup_changeNameForceNew
--- PASS: TestAccAWSALBTargetGroup_changeNameForceNew (84.48s)
=== RUN TestAccAWSALBTargetGroup_changeProtocolForceNew
--- PASS: TestAccAWSALBTargetGroup_changeProtocolForceNew (95.89s)
=== RUN TestAccAWSALBTargetGroup_changePortForceNew
--- PASS: TestAccAWSALBTargetGroup_changePortForceNew (85.77s)
=== RUN TestAccAWSALBTargetGroup_changeVpcForceNew
--- PASS: TestAccAWSALBTargetGroup_changeVpcForceNew (85.00s)
=== RUN TestAccAWSALBTargetGroup_tags
--- PASS: TestAccAWSALBTargetGroup_tags (88.11s)
=== RUN TestAccAWSALBTargetGroup_updateHealthCheck
--- PASS: TestAccAWSALBTargetGroup_updateHealthCheck (82.15s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 572.083s
```
Clarified that to send notifications to more than one Lambda function requires a single `s3_bucket_notification` element with multiple `lambda_function` configuration elements.
If multiple `s3_bucket_notification` elements, each with a single `lambda_function` element are used, one of the configurations is applied, seemingly at random.
When creating a CloudWatch Metric for an Application Load Balancer it is
neccessary to use the suffix of the ARN as the reference to the load
balancer. This commit exposes that as an attribute on the `aws_alb`
resource to prevent the need to use regular expression substitution to
make the reference.
Fixes#8808.
I noticed that Terraform is not (anymore) parsing the value of environment variable `AWS_SECURITY_TOKEN` (which was re-added in May 2015: https://github.com/hashicorp/terraform/pull/1785)
Example ENV:
```
AWS_SECURITY_TOKEN="FQo...vgU="
AWS_ACCESS_KEY_ID="A...A"
AWS_SECRET_ACCESS_KEY="I...t"
AWS_DEFAULT_REGION="eu-west-1"
```
This errors with messages akin to "AWS was not able to validate the provided access credentials".
Setting `AWS_SESSION_TOKEN` instead of `AWS_SECURITY_TOKEN` on the other hand works just fine and seems to be in line with what is suggested in the code: d1ac7d3b2e/vendor/github.com/aws/aws-sdk-go/aws/credentials/env_provider.go (L69), making this whole thing a documentation change.
Happy to provide test cases or additional insights though!
In order to satisify scenarios where a lifecycle is block is used, we
would need the AWS ALB name field to be autogenerated. WE follow the
same work as AWS ELB, we prefix it with `tl-lb-`
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALB_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/08 12:43:40 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALB_ -timeout
120m
=== RUN TestAccAWSALB_basic
--- PASS: TestAccAWSALB_basic (79.81s)
=== RUN TestAccAWSALB_generatedName
--- PASS: TestAccAWSALB_generatedName (93.81s)
=== RUN TestAccAWSALB_namePrefix
--- PASS: TestAccAWSALB_namePrefix (73.48s)
=== RUN TestAccAWSALB_tags
--- PASS: TestAccAWSALB_tags (181.32s)
=== RUN TestAccAWSALB_noSecurityGroup
--- PASS: TestAccAWSALB_noSecurityGroup (66.03s)
=== RUN TestAccAWSALB_accesslogs
--- PASS: TestAccAWSALB_accesslogs (130.82s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 625.285s
```
This fix changes acceptance tests for VPN tunnel to use the correct ports (UDP
500 and 4500). It also changes the documentation to demonstrate using these
port single ports in a `port_range` field.
Some google resources required network be refernced by resource URL (aka self_link), while others required network name.
This change allows either to be supplied.
DRY it out, and add a fix for #5552.
This is a requirement for enabling CloudWatch Logging on Kinesis
Firehost
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSCloudWatchLogStream_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/02 16:19:14 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSCloudWatchLogStream_ -timeout 120m
=== RUN TestAccAWSCloudWatchLogStream_basic
--- PASS: TestAccAWSCloudWatchLogStream_basic (22.31s)
=== RUN TestAccAWSCloudWatchLogStream_disappears
--- PASS: TestAccAWSCloudWatchLogStream_disappears (21.21s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 43.538s
Update the aws_vpc_peering_connection resource to allow peer_owner_id
to be omitted, defaulting to the connected AWS account ID (ie: for
VPC-to-VPC peers in the same account).
Also included is a doc cleanup and updates to the peer test in
resource_aws_route_table_test.go.
This fixeshashicorp/terraform#6396.
This replaces the previous `role_arn` with a block which looks like
this:
```
provider "aws" {
// secret key, access key etc
assume_role {
role_arn = "<Role ARN>"
session_name = "<Session Name>"
external_id = "<External ID>"
}
}
```
We also modify the configuration structure and read the values from the
block if present into those values and adjust the call to AssumeRole to
include the SessionName and ExternalID based on the values set in the
configuration block.
Finally we clean up the tests and add in missing error checks, and clean
up the error handling logic in the Auth helper functions.
This commit enables terraform to utilise the assume role functionality
of sts to execute commands with different privileges than the API
keys specified.
Signed-off-by: Ian Duffy <ian@ianduffy.ie>
This commit adds a new "attachment" style resource for setting the
policy of an AWS S3 bucket. This is desirable such that the ARN of the
bucket can be referenced in an IAM Policy Document.
In addition, we now suppress diffs on the (now-computed) policy in the
S3 bucket for structurally equivalent policies, which prevents flapping
because of whitespace and map ordering changes made by the S3 endpoint.
* [WIP] AWS APIGateway Custom Authorizer
* provider/aws: api_gateway_method - Add missing fields to Read+Update
* provider/aws: Make API Gateway name in test more specific
* provider/aws: APIG - Use minimal configuration in create request
In this example, principal "AWS": "*" tells IAM that any user in the world can assume that role as long as they know the account ID + role name.
In my testing, "Service": "ec2.amazonaws.com" is sufficiently permissive to allow the instance_profile to work without allowing global accesses.
* provider/aws: Add docs for Default Route Table
* add new default_route_table_id attribute, test to VPC
* stub
* add warning to docs
* rough implementation
* first test
* update test, add swap test
* fix typo
Fixes#8468
If a user wished to bump the `engine_version` of an RDS instance,
Terraform was not sending `allow_major_version_upgrade` to the API
*unless* that value also changed at the same time. This caused the
following error from RDS API:
```
* aws_db_instance.bar: Error modifying DB Instance
* tf-20160825101420910562798obb: InvalidParameterCombination: The
* AllowMajorVersionUpgrade flag must be present when upgrading to a new
* major version.
status code: 400, request id: 20e36364-6ab0-11e6-b794-51f12f4135f1
```
This change will always send the `allow_major_version_upgrade` flag to
the API when the `engine_version` changes.
This still relies on the user setting the correct value i.e. if they are
upgrading from postgres 0.4.7 -> 9.5.2 then the config will need to set
the `allow_major_version_upgrade` flag to be `true`
* provider/aws: add `aws_ssm_document` resource
* provider/aws: Changes to `aws_ssm_document` post code review
The changes are things like using d.Id rather than d.Get("name").(string)
and errwrap.Wrapf rather than fmt.Errorf
* Fix crash when reading VPC Peering Connection options.
This resolves the issue introduced in #8310.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Do not de-reference values when using Set().
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* provider/aws: Update VPC Peering connect accept/request attributes
* change from type list to type set
* provider/aws: Update VPC Peering accept/requst options, tests
* errwrap some things
* provider/aws: Change Spot Fleet Request to allow a combination of
subnet_id and availability_zone
Also added a complete set of tests that reflect all of the use cases
that Amazon document
http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-fleet-examples.html
It is important to note there that Terraform will be suggesting that
users create multiple launch configurations rather than AWS's version of
combing values into CSV based parameters. This will ensure that we are
able to enforce the correct state
Also note that `associate_public_ip_address` now defaults to `false` - a migration has been
included in this PR to migration users of this functionality. This needs
to be noted in the changelog. The last part of changing functionality
here is waiting for the state of the request to become `active`. Before
we get to this state, we cannot guarantee that Amazon have accepted the
request or it could have failed validation.
```
% make testacc TEST=./builtin/providers/aws
% TESTARGS='-run=TestAccAWSSpotFleetRequest_'
% 2 ↵
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/22 15:44:21 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSSpotFleetRequest_ -timeout 120m
=== RUN TestAccAWSSpotFleetRequest_changePriceForcesNewRequest
--- PASS: TestAccAWSSpotFleetRequest_changePriceForcesNewRequest (133.90s)
=== RUN TestAccAWSSpotFleetRequest_lowestPriceAzOrSubnetInRegion
--- PASS: TestAccAWSSpotFleetRequest_lowestPriceAzOrSubnetInRegion (76.67s)
=== RUN TestAccAWSSpotFleetRequest_lowestPriceAzInGivenList
--- PASS: TestAccAWSSpotFleetRequest_lowestPriceAzInGivenList (75.22s)
=== RUN TestAccAWSSpotFleetRequest_lowestPriceSubnetInGivenList
--- PASS: TestAccAWSSpotFleetRequest_lowestPriceSubnetInGivenList (96.95s)
=== RUN TestAccAWSSpotFleetRequest_multipleInstanceTypesInSameAz
--- PASS: TestAccAWSSpotFleetRequest_multipleInstanceTypesInSameAz (74.44s)
=== RUN TestAccAWSSpotFleetRequest_multipleInstanceTypesInSameSubnet
--- PASS: TestAccAWSSpotFleetRequest_multipleInstanceTypesInSameSubnet (97.82s)
=== RUN TestAccAWSSpotFleetRequest_overriddingSpotPrice
--- PASS: TestAccAWSSpotFleetRequest_overriddingSpotPrice (76.22s)
=== RUN TestAccAWSSpotFleetRequest_diversifiedAllocation
--- PASS: TestAccAWSSpotFleetRequest_diversifiedAllocation (79.81s)
=== RUN TestAccAWSSpotFleetRequest_withWeightedCapacity
--- PASS: TestAccAWSSpotFleetRequest_withWeightedCapacity (77.15s)
=== RUN TestAccAWSSpotFleetRequest_CannotUseEmptyKeyName
--- PASS: TestAccAWSSpotFleetRequest_CannotUseEmptyKeyName (0.00s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 788.184s
```
* Update resource_aws_spot_fleet_request.go
Replication Groups
In order to be able to restore a named snapshot as ElastiCache Cluster
or a Replication Group, the `snapshot_name` parameter was needed to be
passed. Changing the `snapshot_name` will force a new resource to be
created
```
```
resources
Fixes#8420
Adds the ability to update tags on the ALB resource as well as
supporting tags on `aws_alb_target_group`
```
ALB Tests:
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALB_' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/23 19:30:16 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALB_ -timeout 120m
=== RUN TestAccAWSALB_basic
--- PASS: TestAccAWSALB_basic (67.18s)
=== RUN TestAccAWSALB_tags
--- PASS: TestAccAWSALB_tags (99.88s)
=== RUN TestAccAWSALB_noSecurityGroup
--- PASS: TestAccAWSALB_noSecurityGroup (62.49s)
=== RUN TestAccAWSALB_accesslogs
--- PASS: TestAccAWSALB_accesslogs (126.25s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 355.835s
```
```
ALB Target Group Tests:
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALBTargetGroup_'
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/23 19:37:37 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALBTargetGroup_ -timeout 120m
=== RUN TestAccAWSALBTargetGroup_basic
--- PASS: TestAccAWSALBTargetGroup_basic (47.26s)
=== RUN TestAccAWSALBTargetGroup_tags
--- PASS: TestAccAWSALBTargetGroup_tags (81.01s)
=== RUN TestAccAWSALBTargetGroup_updateHealthCheck
--- PASS: TestAccAWSALBTargetGroup_updateHealthCheck (78.74s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 207.025s
```
Renamed the local_name_filter attribute to name_regex and made it clear in the
docs that this runs locally and could have a performance impact on a large set
of AMIs returned from AWS.
`aws_elasticache_replication_group`
Fixes#8377
Now we can output the endpoint of the primary
```
resource "aws_elasticache_replication_group" "bar" {
replication_group_id = "tf-11111"
replication_group_description = "test description"
node_type = "cache.m1.small"
number_cache_clusters = 2
port = 6379
parameter_group_name = "default.redis2.8"
apply_immediately = true
}
output "primary_endpoint_address" {
value = "${aws_elasticache_replication_group.bar.primary_endpoint_address}"
}
```
This gives us:
```
% terraform apply
...................
aws_elasticache_replication_group.bar: Creation complete
Apply complete! Resources: 1 added, 0 changed, 0 destroyed.
Outputs:
primary_endpoint_address = tf-11111.d5jx4z.ng.0001.use1.cache.amazonaws.com
```
This was the addition of a computed field only so the basic test still works as expected:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElasticacheReplicationGroup_basic' ✹
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/22 17:11:13 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSElasticacheReplicationGroup_basic -timeout 120m
=== RUN TestAccAWSElasticacheReplicationGroup_basic
--- PASS: TestAccAWSElasticacheReplicationGroup_basic (741.71s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 741.735s
```
In cases where the filters provided by AWS against the name of an AMI are not
sufficient, allow adding a "local_name_filter" which is a regex that is used
to filter the AMIs returned by amazon.
The Terraform documentation, rather correctly, refers to a list of options
you can pass to an Elastic Load Balancer from the AWS documentation. All but
one of these options works; 'Server Order Preference' doesn't work, because
the API refers to it as 'Server-Defined-Cipher-Order'.
Add a note to explain this, at least as a temporary solution.
Fixes#8340.
This commit adds two optional blocks called "accepter" and "requester" to the
resource allowing for setting desired VPC Peering Connection options for VPCs
that participate in the VPC peering.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds an `arn` field to `aws_alb` and `aws_alb_target_group`
resources, in order to present a more coherant user experience to people
using resource variables in fields suffixed "arn".
* provider/consul: first stab at adding prepared query support
* provider/consul: flatten pq resource
* provider/consul: implement updates for PQ's
* provider/consul: implement PQ delete
* provider/consul: add acceptance tests for prepared queries
* provider/consul: add template support to PQ's
* provider/consul: use substructures to express optional related components for PQs
* website: first pass at consul prepared query docs
* provider/consul: PQ's support datacenter option and store_token option
* provider/consul: remove store_token on PQ's for now
* provider/consul: allow specifying a separate stored_token
* website: update consul PQ docs
* website: add link to consul_prepared_query resource
* vendor: update github.com/hashicorp/consul/api
* provider/consul: handle 404's when reading prepared queries
* provider/consul: prepared query failover dcs is a list
* website: update consul PQ example usage
* website: re-order arguments for consul prepared queries
This commit adds a resource, acceptance tests and documentation for the
Target Groups for Application Load Balancers.
This is the second in a series of commits to fully support the new
resources necessary for Application Load Balancers.
This commit adds a resource, acceptance tests and documentation for the
new Application Load Balancer (aws_alb). We choose to use the name alb
over the package name, elbv2, in order to avoid confusion.
This is the first in a series of commits to fully support the new
resources necessary for Application Load Balancers.
* provider/aws: Add failing ETC + notifications test
* tidy up the docs some
* provider/aws: Update ElasticTranscoder to allow empty notifications, removing notifications, etc
When you need to enable monitoring for Redshift, you need to create the
correct policy in the bucket for logging. This needs to have the
Redshift Account ID for a given region. This data source provides a
handy lookup for this
http://docs.aws.amazon.com/redshift/latest/mgmt/db-auditing.html#db-auditing-enable-logging
% make testacc TEST=./builtin/providers/aws
% TESTARGS='-run=TestAccAWSRedshiftAccountId_basic' 2 ↵ ✹ ✭
==> Checking that code complies with gofmt requirements...
/Users/stacko/Code/go/bin/stringer
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/08/16 14:39:35 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSRedshiftAccountId_basic -timeout 120m
=== RUN TestAccAWSRedshiftAccountId_basic
--- PASS: TestAccAWSRedshiftAccountId_basic (19.47s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 19.483s
The whitespace in the documentation for `aws_appautoscaling_policy` was very confusing. I believe it was due to a mix up of tabs and spaces. It's much prettier and easier to read now.
This data source provides access during configuration to the ID of the
AWS account for the connection to AWS. It is primarily useful for
interpolating into policy documents, for example when creating the
policy for an ELB or ALB access log bucket.
This will need revisiting and further testing once the work for
AssumeRole is integrated.
* add dep for servicebus client from azure-sdk-for-node
* add servicebus namespaces support
* add docs for servicebus_namespaces
* add Microsoft.ServiceBus to providers list
AWS Lambda VPC config is an optional configuration and which needs to both subnet_ids and
security_group_ids to tie the lambda function to a VPC. We should make it optional if
both subnet_ids and security_group_ids are not net which would add better flexiblity in
creation of more useful modules as there are "if else" checks. Without this we are creating
duplicate modules one with VPC and one without VPC resulting in various anomalies.
An S3 Bucket owner may wish to select a different underlying storage class
for an object. This commit adds an optional "storage_class" attribute to the
aws_s3_bucket_object resource so that the owner of the S3 bucket can specify
an appropriate storage class to use when creating an object.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
- adds "source_uri" field
- "source_uri" expects the URI to an existing blob that you have access
to
- it can be in a different storage account, or in the Azure File service
- the docs have been updated to reflect the change
Signed-off-by: Dan Wendorf <dwendorf@pivotal.io>
* Overriding S3 endpoint - Enable specifying your own
S3 api endpoint to override the default one, under
endpoints.
* Force S3 path style - Expose this option from the aws-sdk-go
configuration to the provider.
* providers/google: Add google_compute_image resource
This change introduces the google_compute_image resource, which allows
Terraform users to create a bootable VM image from a raw disk tarball
stored in Google Cloud Storage. The google_compute_image resource
may be referenced as a boot image for a google_compute_instance.
* providers/google: Support family property in google_compute_image
* provider/google: Idiomatic checking for presence of config val
* vendor: Update Google client libraries
* #7013 add tls config support to consul provider
* #7013 add acceptance tests
* #7013 use GFM tables
* #7013 require one of {CONSUL_ADDRESS,CONSUL_HTTP_ADDR} when running consul acc tests
* provider/aws: Re-implement api gateway parameter handling
this PR cleans up some left overs from PR #4295, namely the parameter handling.
now that GH-2143 is finally closed this PR does away with the ugly
`request_parameters_in_json` and `response_parameters_in_json` hack.
* Add deprecation message and conflictsWith settings
following @radeksimko s advice, keeping the old code around with a deprecation
warning.
this should be cleaned up in a few releases
* provider/aws: fix missing append operation
* provider/aws: mark old parameters clearly as deprecated
* provider/aws work around #8104
following @radeksimko s lead
* provider/aws fix cnp error
An S3 Bucket owner may wish to set a canned ACL (as opposite to explicitly set
grantees, etc.) for an object. This commit adds an optional "acl" attribute to
the aws_s3_bucket_object resource so that the owner of the S3 bucket can
specify an appropriate pre-defined ACL to use when creating an object.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Any S3 Bucket owner may wish to share data but not incur charges associated
with others accessing the data. This commit adds an optional "request_payer"
attribute to the aws_s3_bucket resource so that the owner of the S3 bucket can
specify who should bear the cost of Amazon S3 data transfer.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
### Explanation for this change
Recently, I've been using Terraform to manage AWS API GWs with Lambda backends.
It appears that an explicit dependency is required. Not setting it would lead to this error:
```
[...] Error creating API Gateway Integration Response: NotFoundException: No integration defined for method
```
Thus, I found the thread below which exposes the problem too.
Relevant Terraform version: checked against 0.6.16
Thread issue: https://github.com/hashicorp/terraform/issues/6128
or us-gov
Fixes#7969
`acceleration_status` is not available in China or US-Gov data centers.
Even querying for this will give the following:
```
Error refreshing state: 1 error(s) occurred:
2016/08/04 13:58:52 [DEBUG] plugin: waiting for all plugin processes to
complete...
* aws_s3_bucket.registry_cn: UnsupportedArgument: The request contained
* an unsupported argument.
status code: 400, request id: F74BA6AA0985B103
```
We are going to stop any Read calls for acceleration status from these
data centers
```
% make testacc TEST=./builtin/providers/aws
% TESTARGS='-run=TestAccAWSS3Bucket_' ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSS3Bucket_
-timeout 120m
=== RUN TestAccAWSS3Bucket_Notification
--- PASS: TestAccAWSS3Bucket_Notification (409.46s)
=== RUN TestAccAWSS3Bucket_NotificationWithoutFilter
--- PASS: TestAccAWSS3Bucket_NotificationWithoutFilter (166.84s)
=== RUN TestAccAWSS3Bucket_basic
--- PASS: TestAccAWSS3Bucket_basic (133.48s)
=== RUN TestAccAWSS3Bucket_acceleration
--- PASS: TestAccAWSS3Bucket_acceleration (282.06s)
=== RUN TestAccAWSS3Bucket_Policy
--- PASS: TestAccAWSS3Bucket_Policy (332.14s)
=== RUN TestAccAWSS3Bucket_UpdateAcl
--- PASS: TestAccAWSS3Bucket_UpdateAcl (225.96s)
=== RUN TestAccAWSS3Bucket_Website_Simple
--- PASS: TestAccAWSS3Bucket_Website_Simple (358.15s)
=== RUN TestAccAWSS3Bucket_WebsiteRedirect
--- PASS: TestAccAWSS3Bucket_WebsiteRedirect (380.38s)
=== RUN TestAccAWSS3Bucket_WebsiteRoutingRules
--- PASS: TestAccAWSS3Bucket_WebsiteRoutingRules (258.29s)
=== RUN TestAccAWSS3Bucket_shouldFailNotFound
--- PASS: TestAccAWSS3Bucket_shouldFailNotFound (92.24s)
=== RUN TestAccAWSS3Bucket_Versioning
--- PASS: TestAccAWSS3Bucket_Versioning (654.19s)
=== RUN TestAccAWSS3Bucket_Cors
--- PASS: TestAccAWSS3Bucket_Cors (143.58s)
=== RUN TestAccAWSS3Bucket_Logging
--- PASS: TestAccAWSS3Bucket_Logging (249.79s)
=== RUN TestAccAWSS3Bucket_Lifecycle
--- PASS: TestAccAWSS3Bucket_Lifecycle (259.87s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws
3946.464s
```
thanks to @kwilczynski and @radeksimko for the research on how to handle the generic
errors here
Running these over a 4G tethering connection has been painful :)
* provider/google: Support static private IP addresses
The private address of an instance's network interface may now be specified.
If no value is provided, an address will be chosen by Google Compute Engine
and that value will be read into Terraform state.
* docs: GCE private static IP address information
Add firehose elasticsearch configuration documentation
Adding CRUD for elastic search as firehose destination
Updated the firehose stream documentation to add elastic search as destination example.
Adding testing for es as firehose destination
Update the test case for es
This commit adds VPN Gateway attachment resource, and also an initial tests and
documentation stubs.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
`elasticsearch_version` 2.3
Fixes#7836
This will allow ElasticSearch domains to be deployed with version 2.3 of
ElasticSearch
The other slight modifications are to stop dereferencing values before
passing to d.Set in the Read func. It is safer to pass the pointer to
d.Set and allow that to dereference if there is a value
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElasticSearchDomain_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSElasticSearchDomain_ -timeout 120m
=== RUN TestAccAWSElasticSearchDomain_basic
--- PASS: TestAccAWSElasticSearchDomain_basic (1611.74s)
=== RUN TestAccAWSElasticSearchDomain_v23
--- PASS: TestAccAWSElasticSearchDomain_v23 (1898.80s)
=== RUN TestAccAWSElasticSearchDomain_complex
--- PASS: TestAccAWSElasticSearchDomain_complex (1802.44s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 5313.006s
```
Update resource_aws_elasticsearch_domain.go
* Improve influxdb provider
- reduce public funcs. We should not make things public that don't need to be public
- improve tests by verifying remote state
- add influxdb_user resource
allows you to manage influxdb users:
```
resource "influxdb_user" "admin" {
name = "administrator"
password = "super-secret"
admin = true
}
```
and also database specific grants:
```
resource "influxdb_user" "ro" {
name = "read-only"
password = "read-only"
grant {
database = "a"
privilege = "read"
}
}
```
* Grant/ revoke admin access properly
* Add continuous_query resource
see
https://docs.influxdata.com/influxdb/v0.13/query_language/continuous_queries/
for the details about continuous queries:
```
resource "influxdb_database" "test" {
name = "terraform-test"
}
resource "influxdb_continuous_query" "minnie" {
name = "minnie"
database = "${influxdb_database.test.name}"
query = "SELECT min(mouse) INTO min_mouse FROM zoo GROUP BY time(30m)"
}
```
This commit allows an operator to specify the e-mail address of a service
account to use with a Google Compute Engine instance. If no service account
e-mail is provided, the default service account is used.
Closes#7985
* Add state filter to aws_availability_zones data source.
This commit adds an ability to filter Availability Zones based on state, where
by default it would only list available zones.
Be advised that this does not always works reliably for an older accounts which
have been created in the pre-VPC era of EC2. These accounts tends to retrieve
availability zones that are not VPC-enabled, thus creation of a custom subnet
within such Availability Zone would result in a failure.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Update documentation for aws_availability_zones data source.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Do not filter on state by default.
This commit makes the state filter applicable only when set.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Enables copy of files within vSphere
* Can copy files between different datacenters and datastores
* Update can move uploaded or copied files between datacenters and datastores
* Preserves original functionality for backward compatibility
This test overrides the AWS_DEFAULT_REGION parameter as the security
groups are created in us-east-1 (due to classic VPC requirements)
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBSecurityGroup_importBasic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSDBSecurityGroup_importBasic -timeout 120m
=== RUN TestAccAWSDBSecurityGroup_importBasic
--- PASS: TestAccAWSDBSecurityGroup_importBasic (49.46s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 49.487s
```
* Auto-detect the API version
and update the endpoint URL accordingly
* Typo fix
* Make client and resource work with the 4.X API
* Update documentation
* Fix typos
* 204 now counts as a "success" response
See
f0e76cee2c
for the change in the pdns repository.
* Add a note about a possible pitfall when defining some records
* Add ability to set Performance Mode in aws_efs_file_system.
The Elastic File System (EFS) allows for setting a Performance Mode during
creation, thus enabling anyone to chose performance of the file system according
to their particular needs. This commit adds an optional "performance_mode"
attribte to the aws_efs_file_system resource so that an appropriate mode can be
set as needed.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add test coverage for the ValidateFunc used.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add "creation_token" and deprecate "reference_name".
Add the "creation_token" attribute so that the resource follows the API more
closely (as per the convention), thus deprecate the "reference_name" attribute.
Update tests and documentation accordingly.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
If you specify just a bare ID, then the initial application works but
subsequent applications may end up doing bad things, like:
```
-/+ aws_ebs_volume.vol_1
availability_zone: "us-east-1a" => "us-east-1a"
encrypted: "true" => "true"
iops: "" => "<computed>"
kms_key_id: "arn:aws:kms:us-east-1:123456789:key/59faf88b-0912-4cca-8b6c-bd107a6ba8c4" => "59faf88b-0912-4cca-8b6c-bd107a6ba8c4" (forces new resource)
size: "100" => "100"
snapshot_id: "" => "<computed>"
```
Fixes#7423
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRedshiftCluster_loggingEnabled'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSRedshiftCluster_loggingEnabled -timeout 120m
=== RUN TestAccAWSRedshiftCluster_loggingEnabled
--- PASS: TestAccAWSRedshiftCluster_loggingEnabled (675.21s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 675.233s
```
* provider/mysql: User Resource
This commit introduces a mysql_user resource. It includes basic
functionality of adding a user@host along with a password.
* provider/mysql: Grant Resource
This commit introduces a mysql_grant resource. It can grant a set
of privileges to a user against a whole database.
* provider/mysql: Adding documentation for user and grant resources
Previously the consul_keys resource did double-duty as both a reader and
writer of values from the Consul key/value store, but that made its
interface rather confusing and complex, as well as having all of the other
general problems associated with read-only resources.
Here we split the functionality such that reading is done with the
consul_keys data source while writing is done with the consul_keys
resource.
The old read behavior of the resource is still supported, but it's no
longer documented (except as a deprecation note) and will generate
deprecation warnings when used.
In future it should be possible to simplify the consul_keys resource by
removing all of the read support, but that is deferred for now to give
users a chance to gracefully migrate to the new data source.
Expose the network interface ID that is created with a new instance.
This can be useful when associating an existing elastic IP to the
default interface on an instance that has multiple network interfaces.
* provider/scaleway: update api version
* provider/scaleway: expose ipv6 support, rename ip attributes
since it can be both ipv4 and ipv6, choose a more generic name.
* provider/scaleway: allow servers in different SGs
* provider/scaleway: update documentation
* provider/scaleway: Update docs with security group
* provider/scaleway: add testcase for server security groups
* provider/scaleway: make deleting of security rules more resilient
* provider/scaleway: make deletion of security group more resilient
* provider/scaleway: guard against missing server
* provider/aws: Delete access keys before deleting IAM user
* provider/aws: Put IAM key removal behind force_destroy option
* provider/aws: Move all access key deletion under force_destroy
* Add iam_user force_destroy to website
* provider/aws: Improve clarity of looping over pages in delete IAM user
Sidebar:
- Rename "Azure (Resource Manager)" to "Microsoft Azure" and sort
accordingly
- Rename "Azure (Service Management)" to "Microsoft Azure (Legacy ASM)"
and sort accordingly
ARM provider docs:
- Name changes everywhere to Microsoft Azure Provider
- Mention and link to "legacy Azure Service Management Provider" in opening paragraph
- Sidebar gains link at bottom to Azure Service Management Provider
ASM provider docs:
- Name changes everywhere to Azure Service Management Provider
- Sidebar gains link at bottom to Microsoft Azure Provider
- Every page gets a header with the following
- "NOTE: The Azure Service Management provider is no longer being actively developed by HashiCorp employees. It continues to be supported by the community. We recommend using the Azure Resource Manager based [Microsoft Azure Provider] instead if possible."
* add opsworks permission resource
* add docs
* remove permission from state if the permission object could not be found
* remove nil validate function. validation is done in schema.Resource.
* add id to the list of exported values
* renge over permission to check that we have found got the correct one
* removed comment
* removed set id
* fix unknown region us-east-1c
* add user_profile resource
* add docs
* add default value
* provider/aws: Support kms_key_id for `aws_rds_cluster`
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRDSCluster_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRDSCluster_
-timeout 120m
=== RUN TestAccAWSRDSCluster_basic
--- PASS: TestAccAWSRDSCluster_basic (127.57s)
=== RUN TestAccAWSRDSCluster_kmsKey
--- PASS: TestAccAWSRDSCluster_kmsKey (323.72s)
=== RUN TestAccAWSRDSCluster_encrypted
--- PASS: TestAccAWSRDSCluster_encrypted (173.25s)
=== RUN TestAccAWSRDSCluster_backupsUpdate
--- PASS: TestAccAWSRDSCluster_backupsUpdate (264.07s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 888.638s
```
* provider/aws: Add KMS Key ID to `aws_rds_cluster_instance`
```
```
Fixes#7299 where it was found that computer_name is not optional (as
the msdn documentation states)
```
make testacc TEST=./builtin/providers/azurerm TESTARGS='-run=TestAccAzureRMVirtualMachine_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /vendor/)
TF_ACC=1 go test ./builtin/providers/azurerm -v -run=TestAccAzureRMVirtualMachine_ -timeout 120m
=== RUN TestAccAzureRMVirtualMachine_basicLinuxMachine
--- PASS: TestAccAzureRMVirtualMachine_basicLinuxMachine (403.53s)
=== RUN TestAccAzureRMVirtualMachine_tags
--- PASS: TestAccAzureRMVirtualMachine_tags (488.46s)
=== RUN TestAccAzureRMVirtualMachine_updateMachineSize
--- PASS: TestAccAzureRMVirtualMachine_updateMachineSize (601.82s)
=== RUN TestAccAzureRMVirtualMachine_basicWindowsMachine
--- PASS: TestAccAzureRMVirtualMachine_basicWindowsMachine (646.75s)
=== RUN TestAccAzureRMVirtualMachine_windowsUnattendedConfig
--- PASS: TestAccAzureRMVirtualMachine_windowsUnattendedConfig (891.42s)
=== RUN TestAccAzureRMVirtualMachine_winRMConfig
--- PASS: TestAccAzureRMVirtualMachine_winRMConfig (768.73s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 3800.734s
```
* docs/digitalocean: Adding an import section to the bottom of the DO
importable resources
* docs/azurerm: Adding the Import sections for the AzureRM Importable resources
* docs/aws: Adding the import sections to the AWS provider pages
* Add scaleway provider
this PR allows the entire scaleway stack to be managed with terraform
example usage looks like this:
```
provider "scaleway" {
api_key = "snap"
organization = "snip"
}
resource "scaleway_ip" "base" {
server = "${scaleway_server.base.id}"
}
resource "scaleway_server" "base" {
name = "test"
# ubuntu 14.04
image = "aecaed73-51a5-4439-a127-6d8229847145"
type = "C2S"
}
resource "scaleway_volume" "test" {
name = "test"
size_in_gb = 20
type = "l_ssd"
}
resource "scaleway_volume_attachment" "test" {
server = "${scaleway_server.base.id}"
volume = "${scaleway_volume.test.id}"
}
resource "scaleway_security_group" "base" {
name = "public"
description = "public gateway"
}
resource "scaleway_security_group_rule" "http-ingress" {
security_group = "${scaleway_security_group.base.id}"
action = "accept"
direction = "inbound"
ip_range = "0.0.0.0/0"
protocol = "TCP"
port = 80
}
resource "scaleway_security_group_rule" "http-egress" {
security_group = "${scaleway_security_group.base.id}"
action = "accept"
direction = "outbound"
ip_range = "0.0.0.0/0"
protocol = "TCP"
port = 80
}
```
Note that volume attachments require the server to be stopped, which can lead to
downtimes of you attach new volumes to already used servers
* Update IP read to handle 404 gracefully
* Read back resource on update
* Ensure IP detachment works as expected
Sadly this is not part of the official scaleway api just yet
* Adjust detachIP helper
based on feedback from @QuentinPerez in
https://github.com/scaleway/scaleway-cli/pull/378
* Cleanup documentation
* Rename api_key to access_key
following @stack72 suggestion and rename the provider api_key for more clarity
* Make tests less chatty by using custom logger
We cannot use the "id" field to represent policy ID, because it is used
internally by Terraform. Also change the "id" field within a statement
to "sid" for consistency with the generated JSON.
The template resources don't actually need to retain any state, so they
are good candidates to be data sources.
This includes a few tweaks to the acceptance tests -- now configured to
run as unit tests -- since it seems that they have been slightly broken
for a while now. In particular, the "update" cases are no longer tested
because updating is not a meaningful operation for a data source.
When adding multiple notifications from one S3 bucket to one SQS queue, it wasn't immediately intuitive how to do this.
At first I created two `aws_s3_bucket_notification` configs and it seemed to work fine, however the config for one event
will overwrite the other. In order to have multiple events, you can defined the `queue` key twice, or use an array if you're
working with the JSON syntax. I tried to make this more clear in the documentation.
This fixes#7157. It doesn't change the way aws_ami works
```
make testacc TEST=./builtin/providers/aws
TESTARGS='-run=TestAccAWSAMICopy'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSAMICopy
-timeout 120m
=== RUN TestAccAWSAMICopy
--- PASS: TestAccAWSAMICopy (479.75s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 479.769s
```
allows load balancer policies and their assignment to backend servers or listeners to be configured independently.
this gives flexibility to configure additional policies on aws elastic load balancers aside from the already provided "convenience" wrappers for cookie stickiness
This resource (unlike the others in this provider) isn't stateful, so it
is a good candidate to be a data source.
The old resource form is preserved via the standard shim in helper/schema,
which will generate a deprecation warning but will still allow the
resource to be used.
When applying or removing 2+ security groups from an instance, an EOF
error will be triggered even though the action was successful. This
patch accounts for and ignores the EOF error. It also adds a test
case.
Security Group and Port documentation are also updated in this
commit.
* small doc update
* provider/atlas: Add docs for Artifact Data Source
* provider/atlas: Remove a test method that isn't used
* provider/atlas: Add Data Source for Atlas Artifact
* provider/atlas: Show deprecation error on atlas_artifact resource
* Added support for redshift destination to firehose delivery streams
* Small documentation fix
* go fmt after rebase
* small fixes after rebase
* provider/aws: Firehose test cleanups
* provider/aws: Update docs
* Convert Redshift and S3 blocks to TypeList
* provider/aws: Add migration for S3 Configuration in Kinesis firehose
* providers/aws: Safety first when building Redshift config options
* restore commented out log statements in the migration
* provider/aws: use MaxItems in schema
* added additional error info for when memory swap assert fails.
related to https://github.com/hashicorp/terraform/pull/7392
* updated docker_container documentation
reflect recent changes to docker provider around tests, dns options and
dns search support.
* Grammar and punctuation changes
Docker container documentation.
* Spell checking, grammar and punctuation.
Docker container documentation.
* Markdown change sto docker container documentation
* Add SES resource
* Detect ReceiptRule deletion outside of Terraform
* Handle order of rule actions
* Add position field to docs
* Fix hashes, add log messages, and other small cleanup
* Fix rebase issue
* Fix formatting
In CloudStack you can dynamically start using an ACL and once you use
an ACL you can dynamically swap ACL’s. But once your using an ACL, you
can no longer stop using an ACL without rebuilding the network.
This change makes the `ForceNew` value dynamic so that it only returns
`true` if you are reverting from using an ACL to not using an ACL
anymore, making this functionally inline with the behaviour CloudStack
offers.
this datasource allows terraform to work with externally modified state, e.g.
when you're using an ECS service which is continously updated by your CI via the
AWS CLI.
right now you'd have to wrap terraform into a shell script which looks up the
current image digest, so running terraform won't change the updated service.
using the aws_ecs_container_definition data source you can now leverage
terraform, removing the wrapper entirely.
Since this resource produces a list it feels more intuitive to give its
attribute a plural name, and since the noun "instance" already means
something specific in the AWS provider that doesn't apply here we use
"names" to indicate that these are availability zone names.
Also includes updating the docs to not show a dynamic count example for
now, since we don't support that yet.
false
Fixes#7035
A known issue in Terraform means that d.GetOk() on a bool which is false
will mean it doesn't get evaulated. Therefore, when people set
publicly_accessible to false, it will never get evaluated on the Create
We are going to make it default to false now
The documentation wording implies that in all cases you have to manually accept peering requests. This change is intended to clarify where this is required. The documentation also separates between "basic usage" and "basic usage with tags", but the expanded usage didn't actually provide much additional useful information. Expanded a bit to show the use of auto_accept since both VPCs are created by the content and to show setting the Name tag for proper display in the console.
resize
When resizing a DO droplet, you can only increase the size not
descrease. If you try and go down in size, the API will return this
error:
```
* digitalocean_droplet.foobar: Error resizing droplet (17090364):
POST https://api.digitalocean.com/v2/droplets/17090364/actions:
422 Size can not decrease size of Droplet's disk image
```
Since the custom_configuration_parameters can't take dots, we cannot
set 'disk.EnableUUID'. This adds a parameter for this options that gets
added to a configSpec. This option causes the vm to mount disks by uuid
on the guest OS.
* Adding debug functionality to log debug api calls
* adding debug and refactoring tests
* more tweaks with tests
* updating documentation
* more refactoring of tests
* working through factor for testing
* removing logging that displays username and password
* more work on getting tests stable
The example is referencing a non-existent variable, `allocation_id`, within the `aws_eip` resource. I believe this should actually be `aws_eip.example.id` instead of `aws_eip.example.allocation_id`.
Add the iam_arn attribute to aws_cloudfront_origin_access_identity,
which computes the IAM ARN for a certain CloudFront origin access
identity.
This is necessary because S3 modifies the bucket policy if CanonicalUser
is sent, causing spurious diffs with aws_s3_bucket resources.
This brings over the work done by @apparentlymart and @radeksimko in
PR #3124, and converts it into a data source for the AWS provider:
This commit adds a helper to construct IAM policy documents using
familiar Terraform concepts. It makes Terraform-style interpolations
easier and resolves the syntax conflict between Terraform interpolations
and IAM policy variables by changing the latter to use &{...} for its
interpolations.
Its use is completely optional and users are free to go on using literal
heredocs, file interpolations or whatever else; this just adds another
option that fits more naturally into a Terraform config.
This data source allows one to look up the most recent AMI for a specific
set of parameters, much like aws ec2 describe-images in the AWS CLI.
Basically a refresh of hashicorp/terraform#4396, in data source form.
* Add per user, role and group policy attachment
* Add docs for new IAM policy attachment resources.
* Make policy attachment resources manage only 1 entity<->policy attachment
* provider/aws: Tidy up IAM Group/User/Role attachments
This commit adds a data source with a single list, `instance` for the
schema which gets populated with the availability zones to which an
account has access.
Allow a cloud admin to target a specific tenant in which to allocate
a floating IP. This is useful when the cloud admin does not want to
delegate network privileges to the tenants or various Q&A scenarios.
resource
We had a line on the Update func that said:
```
Hash key can only be specified at creation, you cannot modify it.
```
The resource has now been changed to ForceNew on the hashkey
```
aws_dynamodb_table.demo-user-table: Refreshing state... (ID: Users)
aws_dynamodb_table.demo-user-table: Destroying...
aws_dynamodb_table.demo-user-table: Destruction complete
aws_dynamodb_table.demo-user-table: Creating...
aws_dynamodb_table.demo-user-table: Creation complete
```
Changed schema type for disks to support dynamic non-ordered disk
swapping. All Disk attributes have been made non ForceNew since
any changes should be handled in the upgrade() function.
Added 'name' attribute to disks to act as a unique
identifier for when users request for new disks. It is also used as
the filename for the new disk. Templates are considered immutable.
The openstack_networking_subnet_v2 resource was originally designed
to have DHCP disabled by default; however, a bug in the original
implementation caused DHCP to always be enabled and never be
disabled. This bug was fixed in #6052.
Recent discussions have shown that users prefer if DHCP is enabled
by default. This commit implements makes the change.
When stage_name is not passed to the resource
aws_api_gateway_deployment a terraform apply will fail. This is
because the stage_name is required and not optional.
* Grafana provider
* grafana_data_source resource.
Allows data sources to be created in Grafana. Supports all data source
types that are accepted in the current version of Grafana, and will
support any future ones that fit into the existing structure.
* Vendoring of apparentlymart/go-grafana-api
This is in anticipation of adding a Grafana provider plugin.
* grafana_dashboard resource
* Website documentation for the Grafana provider.
* provider/datadog Update go-datadog-api.
* provider/datadog Add support for "require_full_window" and "locked".
* provider/datadog Update tests, update doco, gofmt.
* provider/datadog Add options to update resource.
* provider/datadog "require_full_window" defaults to True, "locked" to False. Use
those initial values as the starting configuration.
* provider/datadog Update notify_audit tests to use the default value for
testAccCheckDatadogMonitorConfig and a custom value for
testAccCheckDatadogMonitorConfigUpdated.
This catches a situation where the code ignores setting the option on creation,
and the update function merely asserts the default value, versus actually changing
the value.
`azurerm_storage_account` access keys
Please note that we do NOT have the ability to manage the access keys -
we are just getting the keys that the account creates for us. To manage
the keys, you would need to use the azure portal still
Martin Atkins