In #7170 we found two scenarios where the type checking done during the
`context.Validate()` graph walk was circumvented, and the subsequent
assumption of type safety in the provider's `Diff()` implementation
caused panics.
Both scenarios have to do with interpolations that reference Computed
values. The sentinel we use to indicate that a value is Computed does
not carry any type information with it yet.
That means that an incorrect reference to a list or a map in a string
attribute can "sneak through" validation only to crop up...
1. ...during Plan for Data Source References
2. ...during Apply for Resource references
In order to address this, we:
* add high-level tests for each of these two scenarios in `provider/test`
* add context-level tests for the same two scenarios in `terraform`
(these tests proved _really_ tricky to write!)
* place an `EvalValidateResource` just before `EvalDiff` and `EvalApply` to
catch these errors
* add some plumbing to `Plan()` and `Apply()` to return validation
errors, which were previously only generated during `Validate()`
* wrap unit-tests around `EvalValidateResource`
* add an `IgnoreWarnings` option to `EvalValidateResource` to prevent
active warnings from halting execution on the second-pass validation
Eventually, we might be able to attach type information to Computed
values, which would allow for these errors to be caught earlier. For
now, this solution keeps us safe from panics and raises the proper
errors to the user.
Fixes#7170
I noticed we had two mechanisms for unit test override. One that dropped
a sentinel into the env var, and another with a struct member on
TestCase. This consolidates the two, using the cleaner struct member
internal mechanism and the nicer `resource.UnitTest()` entry point.
This commit adds a flag to acceptance tests in order to make
appropriately named tests work during `make test` irrespective of the
TF_ACC environment variable. This should only be used on tests which are
known to be fast.
When testing destroy, the test harness calls Refresh followed by Plan,
with the expectation that the resulting diff will be empty.
Data resources challenge this expectation, because they will always be
instantiated during refresh if their configuration isn't computed, and so
the subsequent diff will want to destroy what was instantiated.
To work around this, we make an exception that data resource destroy
diffs may appear in the plan but nothing else.
This fixes#6713.
This commit forward ports the changes made for 0.6.17, in order to store
the type and sensitive flag against outputs.
It also refactors the logic of the import for V0 to V1 state, and
fixes up the call sites of the new format for outputs in V2 state.
Finally we fix up tests which did not previously set a state version
where one is required.
This adds a field terraform_version to the state that represents the
Terraform version that wrote that state. If Terraform encounters a state
written by a future version, it will error. You must use at least the
version that wrote that state.
Internally we have fields to override this behavior (StateFutureAllowed),
but I chose not to expose them as CLI flags, since the user can just
modify the state directly. This is tricky, but should be tricky to
represent the horrible disaster that can happen by enabling it.
We didn't have to bump the state format version since the absense of the
field means it was written by version "0.0.0" which will always be
older. In effect though this change will always apply to version 2 of
the state since it appears in 0.7 which bumped the version for other
purposes.
As I've been working through the resources, I'm finding that a lot are
going to need some serious work. Given we have hundreds, I think it
might be prudent to make this opt-in for now and we can revisit
automatic/opt-out at some future point.
Importability will likely be opt-in it appears so this will match up
with that.
Originally I used an empty config module. This caused problems since
important provider configurations weren't available. Instead, I now set
it to use the full config. This isn't an issue since the attributes
themselves aren't available to Refresh anyways.
Here we also introduce a `test` provider meant as an aid to exposing
via automated tests issues involving interactions between
`helper/schema` and Terraform core.
This has been helpful so far in diagnosing `ignore_changes` problems,
and I imagine it will be helpful in other contexts as well.
We'll have to be careful to prevent the `test` provider from becoming a
dumping ground for poorly specified tests that have a clear home
elsewhere. But for bug exposure I think it's useful to have.
Change the `RetryFunc` from a plain `error` return type to a
specialized `RetryError` which must decide whether it is
retryable or not.
Add `RetryableError` / `NonRetryableError` factory functions that
callers are meant to use to build up these errors.
This makes it eminently clear whether or not a given error is
retryable from inside the client code.
Goal here is to _not_ change any behavior, simply reflect the
existing behavior with the new, clearer, API.
In #4700 while fixing a data race I made an incorrect assumption about
the return value of StateChangeConf, and ended up changing the behavior
in the timeout case to always return:
> timeout while waiting for state to become '[success]'
When it used to capture the "most recent error" from the function
itself.
It's much more useful to see that error bubbling up, so here we revert
to pulling it out of the function as we did before, and we protect
against the data race with a good old fashioned mutex.
Helpful when iterating on a drift test.
Eventually I think this assertion could be fanned out to something much
more targeted like:
ExpectAttributeDiff(resource, attr, oldval, newval)
But this is a step in the right direction.
The implementation was attempting to capture the error using a scoped
variable reference, but the error value is already exposed via the
return value of `WaitForState()`. Using that instead fixes the data
race.
Fixes the following data race:
```
==================
WARNING: DATA RACE
Read by goroutine 74:
github.com/hashicorp/terraform/helper/resource.Retry()
/Users/phinze/go/src/github.com/hashicorp/terraform/helper/resource/wait.go:35 +0x284
github.com/hashicorp/terraform/helper/resource.TestRetry_timeout()
/Users/phinze/go/src/github.com/hashicorp/terraform/helper/resource/wait_test.go:35 +0x60
testing.tRunner()
/private/var/folders/vd/7l9ys5k57l91x63sh28wl_kc0000gn/T/workdir/go/src/testing/testing.go:456 +0xdc
Previous write by goroutine 90:
github.com/hashicorp/terraform/helper/resource.Retry.func1()
/Users/phinze/go/src/github.com/hashicorp/terraform/helper/resource/wait.go:20 +0x87
github.com/hashicorp/terraform/helper/resource.(*StateChangeConf).WaitForState.func1()
/Users/phinze/go/src/github.com/hashicorp/terraform/helper/resource/state.go:83 +0x284
Goroutine 74 (running) created at:
testing.RunTests()
/private/var/folders/vd/7l9ys5k57l91x63sh28wl_kc0000gn/T/workdir/go/src/testing/testing.go:561 +0xaa3
testing.(*M).Run()
/private/var/folders/vd/7l9ys5k57l91x63sh28wl_kc0000gn/T/workdir/go/src/testing/testing.go:494 +0xe4
main.main()
github.com/hashicorp/terraform/helper/resource/_test/_testmain.go:84 +0x20f
Goroutine 90 (running) created at:
github.com/hashicorp/terraform/helper/resource.(*StateChangeConf).WaitForState()
/Users/phinze/go/src/github.com/hashicorp/terraform/helper/resource/state.go:127 +0x283
github.com/hashicorp/terraform/helper/resource.Retry()
/Users/phinze/go/src/github.com/hashicorp/terraform/helper/resource/wait.go:34 +0x276
github.com/hashicorp/terraform/helper/resource.TestRetry_timeout()
/Users/phinze/go/src/github.com/hashicorp/terraform/helper/resource/wait_test.go:35 +0x60
testing.tRunner()
/private/var/folders/vd/7l9ys5k57l91x63sh28wl_kc0000gn/T/workdir/go/src/testing/testing.go:456 +0xdc
==================
```
In the acceptance testing framework, it is neccessary to provide a copy
of the state _before_ the destroy is applied to the check in order that
it can loop over resources to verify their destruction. This patch makes
a deep copy of the state prior to applying test steps which have the
Destroy option set and then passes that to the destroy check.
We weren't doing any log setup for acceptance tests, which made it
difficult to wrangle log output in CI.
This moves the log setup functions we use in `main` over into a helper
package so we can use them for acceptance tests as well.
This means that acceptance tests will by default be a _lot_ quieter,
only printing out actual test output. Setting `TF_LOG=trace` will
restore the full prior noise level.
Only minor behavior change is to make `ioutil.Discard` the default
return value rather than a `nil` that needs to be checked for.
The Exists function can run in a context where the contents of the
template have changed, but it uses the old set of variables from the
state. This means that when the set of variables changes, rendering will
fail in Exists. This was returning an error, but really it just needs to
be treated as a scenario where the template needs re-rendering.
fixes#2344 and possibly a few other template issues floating around
This reworks the template lifecycle a bit such that we get nicer diff
behavior.
First, we tick ForceNew on for both filename and vars, so that the diff
indicates that the template will be "replaced" on change. This is mostly
cosmetic, but it also tracks conceptually with the fact that the
identifier we use is a hash of the contents, so any change essentially
makes a "new resource".
Second, we change the Exists implementation to only return `false` when
there has been a change in the rendered template. This lets descendent
resources see the computed value changing so that they'll properly
trigger in the plan.
Fixes#1898
Refs #1866 (but does not fix, there's another deeper issue there)
AccTests like TestAccComputeInstance_basic_deprecated_network were
failing early on "invalid config" when we are explictly testing behavior
that we know generates warnings.
Do directory expansion on filenames.
Add basic acceptance tests. Code coverage is 72.5%.
Uncovered code is uninteresting and/or impossible error cases.
Note that this required adding a knob to
helper/resource.TestStep to allow transient
resources.
I forgot to add `Computed: true` when I made the "key_name" field
optional in #1751.
This made the behavior:
* Name generated in Create and set as ID
* Follow up plan (without refresh) was nice and empty
* During refresh, name gets cleared out on Read, causing a bad diff on
subsequent plans
We can automatically catch bugs like this if we add yet another
verification step to our resource acceptance tests -> a post
Refresh+Plan that we verify is empty.
I left the non-refresh Plan verification in, because it's important that
_both_ of these are empty after an Apply.
Adds an "alias" field to the provider which allows creating multiple instances
of a provider under different names. This provides support for configurations
such as multiple AWS providers for different regions. In each resource, the
provider can be set with the "provider" field.
(thanks to Cisco Cloud for their support)
Each acceptance test step plays a Refresh, Plan, Apply for a given
config. This adds a follow up Plan and fails the test if it does not
come back empty. This will catch issues with perpetual, unresolvable
diffs that crop up here and there.
This is going to cause a lot of our existing acceptance tests to fail -
too many to roll into a single PR. I think the best plan is to land this
in master and then fix the failures (each of which should be catching a
legitimate provider bug) one by one until we get the provider suites
back to green.
Add `-target=resource` flag to core operations, allowing users to
target specific resources in their infrastructure. When `-target` is
used, the operation will only apply to that resource and its
dependencies.
The calculated dependencies are different depending on whether we're
running a normal operation or a `terraform destroy`.
Generally, "dependencies" refers to ancestors: resources falling
_before_ the target in the graph, because their changes are required to
accurately act on the target.
For destroys, "dependencies" are descendents: those resources which fall
_after_ the target. These resources depend on our target, which is going
to be destroyed, so they should also be destroyed.
James Bardin