* Fix taint and untaint commands when in a workspace
Fixes#22157. Removes DefaultStateFilepath as the default for the
-state flag, allowing workspaces to be used properly.
* update test with modern state types
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
In Terraform 0.11 and earlier, the "terraform fmt" command was very
opinionated in the interests of consistency. While that remains its goal,
for pragmatic reasons Terraform 0.12 significantly reduced the number
of formatting behaviors in the fmt command. We've held off on introducing
0.12-and-later-flavored cleanups out of concern it would make it harder
to maintain modules that are cross-compatible with both Terraform 0.11
and 0.12, but with this aimed to land in 0.14 -- two major releases
later -- our new goal is to help those who find older Terraform language
examples learn about the more modern idiom.
More rules may follow later, now that the implementation is set up to
allow modifications to tokens as well as modifications to whitespace, but
for this initial pass the command will now apply the following formatting
conventions:
- 0.11-style quoted variable type constraints will be replaced with their
0.12 syntax equivalents. For example, "string" becomes just string.
(This change quiets a deprecation warning.)
- Collection type constraints that don't specify an element type will
be rewritten to specify the "any" element type explicitly, so
list becomes list(any).
- Arguments whose expressions consist of a quoted string template with
only a single interpolation sequence inside will be "unwrapped" to be
the naked expression instead, which is functionally equivalent.
(This change quiets a deprecation warning.)
- Block labels are given in quotes.
Two of the rules above are coming from a secondary motivation of
continuing down the deprecation path for two existing warnings, so authors
can have two active deprecation warnings quieted automatically by
"terraform fmt", without the need to run any third-party tools.
All of these rules match with current documented idiom as shown in the
Terraform documentation, so anyone who follows the documented style should
see no changes as a result of this. Those who have adopted other local
style will see their configuration files rewritten to the standard
Terraform style, but it should not make any changes that affect the
functionality of the configuration.
There are some further similar rewriting rules that could be added in
future, such as removing 0.11-style quotes around various keyword or
static reference arguments, but this initial pass focused only on some
rules that have been proven out in the third-party tool
terraform-clean-syntax, from which much of this commit is a direct port.
For now this doesn't attempt to re-introduce any rules about vertical
whitespace, even though the 0.11 "terraform fmt" would previously apply
such changes. We'll be more cautious about those because the results of
those rules in Terraform 0.11 were often sub-optimal and so we'd prefer
to re-introduce those with some care to the implications for those who
may be using vertical formatting differences for some semantic purpose,
like grouping together related arguments.
Previously we were just using hclwrite.Format, a token-only formatting
pass. Now we'll do that via the full hclwrite parser, getting the
formatting as a side-effect of the parsing and re-serialization.
This should have no change in observable behavior as-is, but in a future
commit we'll add some additional processing rules that modify the syntax
tree before re-serializing it.
Previously formatting was just a simple wrapper around hclwrite.Format.
That remains true here, but the call is factored out into a separate
method in preparation for making it also do some Terraform-specific
cleanups in a future commit.
Sensitive values may not be used in outputs which are not also marked
as sensitive. This includes values nested within complex structures.
Note that sensitive values are unmarked before writing to state. This
means that sensitive values used in module outputs will have the
sensitive mark removed. At the moment, we have not implemented
sensitivity propagation from module outputs back to value marks.
This commit also reworks the tests for NodeApplyableOutput to cover
more existing behaviour, as well as this change.
Add a written bug triage process and link to it in README.md
Bug process
Remove goals, edit for brevity, and move how to write a good issue report to bug report template
link HashiCorp GPG key in bug report template
add summary links for triage process
A data source referencing another data source through depends_on should
not be forced to defer until apply. Data sources have no side effects,
so nothing should need to be applied. If the dependency has a
planned change due to a managed resource, the original data source will
also encounter that further down the list of dependencies.
This prevents a data source being read during plan for any reason from
causing other data sources to be deferred until apply. It does not
change the behavior noticeably in 0.14, but because 0.13 still had
separate refresh and plan phases which could read the data source, the
deferral could cause many things downstream to become unexpectedly
unknown until apply.
When a sensitive variable has a complex type, any traversal of the
variable should still result in a sensitive value. This test uses a
sensitive `map(string)` and verifies that both plan and state output
include the appropriate sensitive marks for the resource attribute.
NodePlannableResource and NodeApplyableResource EvalTree()s have been
replaced with Execute() nodes and straight-through code. Both called
EvalWriteResourceState and were the only functions to use it, so I chose
to replace EvalWriteResourceState entirely with straight-through code
(by copying the contents into the two locations).
As we continue iterating towards saving valid hashes for a package in a
depsfile lock file after installation and verifying them on future
installation, this prepares getproviders for the possibility of having
multiple valid hashes per package.
This will arise in future commits for two reasons:
- We will need to support both the legacy "zip hash" hashing scheme and
the new-style content-based hashing scheme because currently the
registry protocol is only able to produce the legacy scheme, but our
other installation sources prefer the content-based scheme. Therefore
packages will typically have a mixture of hashes of both types.
- Installing from an upstream registry will save the hashes for the
packages across all supported platforms, rather than just the current
platform, and we'll consider all of those valid for future installation
if we see both successful matching of the current platform checksum and
a signature verification for the checksums file as a whole.
This also includes some more preparation for the second case above in that
signatureAuthentication now supports AcceptableHashes and returns all of
the zip-based hashes it can find in the checksums file. This is a bit of
an abstraction leak because previously that authenticator considered its
"document" to just be opaque bytes, but we want to make sure that we can
only end up trusting _all_ of the hashes if we've verified that the
document is signed. Hopefully we'll make this better in a future commit
with some refactoring, but that's deferred for now in order to minimize
disruption to existing codepaths while we work towards a provider locking
MVP.
The logic for what constitutes a valid hash and how different hash schemes
are represented was starting to get sprawled over many different files and
packages.
Consistently with other cases where we've used named types to gather the
definition of a particular string into a single place and have the Go
compiler help us use it properly, this introduces both getproviders.Hash
representing a hash value and getproviders.HashScheme representing the
idea of a particular hash scheme.
Most of this changeset is updating existing uses of primitive strings to
uses of getproviders.Hash. The new type definitions are in
internal/getproviders/hash.go.
Although origin registries return specific [filename, hash] pairs, our
various different installation methods can't produce a structured mapping
from platform to hash without breaking changes.
Therefore, as a compromise, we'll continue to do platform-specific checks
against upstream data in the cases where that's possible (installation
from origin registry or network mirror) but we'll treat the lock file as
just a flat set of equally-valid hashes, at least one of which must match
after we've completed whatever checks we've made against the
upstream-provided checksums/signatures.
This includes only the minimal internal/getproviders updates required to
make this compile. A subsequent commit will update that package to
actually support the idea of verifying against multiple hashes.
The "acceptable hashes" for a package is a set of hashes that the upstream
source considers to be good hashes for checking whether future installs
of the same provider version are considered to match this one.
Because the acceptable hashes are a package authentication concern and
they already need to be known (at least in part) to implement the
authenticators, here we add AcceptableHashes as an optional extra method
that an authenticator can implement.
Because these are hashes chosen by the upstream system, the caller must
make its own determination about their trustworthiness. The result of
authentication is likely to be an input to that, for example by
distrusting hashes produced by an authenticator that succeeds but doesn't
report having validated anything.
This is the pre-existing hashing scheme that was initially built for
releases.hashicorp.com and then later reused for the provider registry
protocol, which takes a SHA256 hash of the official distribution .zip file
and formats it as lowercase hex.
This is a non-ideal hash scheme because it works only for
PackageLocalArchive locations, and so we can't verify package directories
on local disk against such hashes. However, the registry protocol is now
a compatibility constraint and so we're going to need to support this
hashing scheme for the foreseeable future.
* Add creation test and simplify in-place test
* Add deletion test
* Start adding marking from state
Start storing paths that should be marked
when pulled out of state. Implements deep
copy for attr paths. This commit also includes some
comment noise from investigations, and fixing the diff test
* Fix apply stripping marks
* Expand diff tests
* Basic apply test
* Update comments on equality checks to clarify current understanding
* Add JSON serialization for sensitive paths
We need to serialize a slice of cty.Path values to be used to re-mark
the sensitive values of a resource instance when loading the state file.
Paths consist of a list of steps, each of which may be either getting an
attribute value by name, or indexing into a collection by string or
number.
To serialize these without building a complex parser for a compact
string form, we render a nested array of small objects, like so:
[
[
{ type: "get_attr", value: "foo" },
{ type: "index", value: { "type": "number", "value": 2 } }
]
]
The above example is equivalent to a path `foo[2]`.
* Format diffs with map types
Comparisons need unmarked values to operate on,
so create unmarked values for those operations. Additionally,
change diff to cover map types
* Remove debugging printing
* Fix bug with marking non-sensitive values
When pulling a sensitive value from state,
we were previously using those marks to remark
the planned new value, but that new value
might *not* be sensitive, so let's not do that
* Fix apply test
Apply was not passing the second state
through to the third pass at apply
* Consistency in checking for length of paths vs inspecting into value
* In apply, don't mark with before paths
* AttrPaths test coverage for DeepCopy
* Revert format changes
Reverts format changes in format/diff for this
branch so those changes can be discussed on a separate PR
* Refactor name of AttrPaths to AttrSensitivePaths
* Rename AttributePaths/attributePaths for naming consistency
Co-authored-by: Alisdair McDiarmid <alisdair@users.noreply.github.com>
In order to save any changes to lifecycle options, we need to record
those changes during refresh, otherwise they would only be updated when
there is a change in the resource to be applied.
Nick McClendon