The init error was output deep in the backend by detecting a
special ResourceProviderError and formatted directly to the CLI.
Create some Diagnostics closer to where the problem is detected, and
passed that back through the normal diagnostic flow. While the output
isn't as nice yet, this restores the helpful error message and makes the
code easier to maintain. Better formatting can be handled later.
The API surface area is much smaller when we use the remote backend for remote state only.
So in order to try and prevent any backwards incompatibilities when TF runs inside of TFE, we’ve split up the discovery services into `state.v2` (which can be used for remote state only configurations, so when running in TFE) and `tfe.v2.1` (which can be used for all remote configurations).
This changes the contract for `PlanResourceChange` so that the provider is now responsible
for populating all default values during plan, including inserting any unknown values for
defaults it will fill in at apply time.
We've changed the contract for PlanResourceChange to now require the
provider to populate any default values (including unknowns) it wants to
set for computed arguments, so our mock provider here now needs to be a
little more complex to deal with that.
This fixes several of the tests in this package. A minor change to
TestLocal_applyEmptyDirDestroy was required to make it properly configure
the mock provider so PlanResourceChange can access the schema.
In Terraform 0.11 and earlier we just silently ignored undeclared
variables in -var-file and the automatically-loaded .tfvars files. This
was a bad user experience for anyone who made a typo in a variable name
and got no feedback about it, so we made this an error for 0.12.
However, several users are now relying on the silent-ignore behavior for
automation scenarios where they pass the same .tfvars file to all
configurations in their organization and expect Terraform to ignore any
settings that are not relevant to a specific configuration. We never
intentionally supported that, but we don't want to immediately break that
workflow during 0.12 upgrade.
As a compromise, then, we'll make this a warning for v0.12.0 that contains
a deprecation notice suggesting to move to using environment variables
for this "cross-configuration variables" use-case. We don't produce errors
for undeclared variables in environment variables, even though that
potentially causes the same UX annoyance as ignoring them in vars files,
because environment variables are assumed to live in the user's session
and this it would be very inconvenient to have to unset such variables
when moving between directories. Their "ambientness" makes them a better
fit for these automatically-assigned general variable values that may or
may not be used by a particular configuration.
This can revert to being an error in a future major release, after users
have had the opportunity to migrate their automation solutions over to
use environment variables.
We don't seem to have any tests covering this specific situation right
now. That isn't ideal, but this change is so straightforward that it would
be relatively expensive to build new targeted test cases for it and so
I instead just hand-tested that it is indeed now producing a warning where
we were previously producing an error. Hopefully if there is any more
substantial work done on this codepath in future that will be our prompt
to add some unit tests for this.
The AWS Go SDK automatically provides a default request retryer with exponential backoff that is invoked via setting `MaxRetries` or leaving it `nil` will default to 3. The terraform-aws-provider `config.Client()` sets `MaxRetries` to 0 unless explicitly configured above 0. Previously, we were not overriding this behavior by setting the configuration and therefore not invoking the default request retryer.
The default retryer already handles HTTP error codes above 500, including S3's InternalError response, so the extraneous handling can be removed. This will also start automatically retrying many additional cases, such as temporary networking issues or other retryable AWS service responses.
Changes:
* s3/backend: Add `max_retries` argument
* s3/backend: Enhance S3 NoSuchBucket error to include additional information
* Upgrading to 2.0.0 of github.com/hashicorp/go-azure-helpers
* Support for authenticating using Azure CLI
* backend/azurerm: support for authenticating using the Azure CLI
This PR improves the error handling so we can provide better feedback about any service discovery errors that occured.
Additionally it adds logic to test for specific versions when discovering a service using `service.vN`. This will enable more informational errors which can indicate any version incompatibilities.
This change enables a few related use cases:
* AWS has partitions outside Commercial, GovCloud (US), and China, which are the only endpoints automatically handled by the AWS Go SDK. DynamoDB locking and credential verification can not currently be enabled in those regions.
* Allows usage of any DynamoDB-compatible API for state locking
* Allows usage of any IAM/STS-compatible API for credential verification
Use the entitlements to a) determine if the organization exists, and b) as a means to select which backend to use (the local backend with remote state, or the remote backend).
Variables values are marshalled with an explicit type of
cty.DynamicPseudoType, but were being decoded using `Implied Type` to
try and guess the type. This was causing errors because `Implied Type`
does not expect to find a late-bound value.
If an instance object in state has an earlier schema version number then
it is likely that the schema we're holding won't be able to decode the
raw data that is stored. Instead, we must ask the provider to upgrade it
for us first, which might also include translating it from flatmap form
if it was last updated with a Terraform version earlier than v0.12.
This ends up being a "seam" between our use of int64 for schema versions
in the providers package and uint64 everywhere else. We intend to
standardize on int64 everywhere eventually, but for now this remains
consistent with existing usage in each layer to keep the type conversion
noise contained here and avoid mass-updates to other Terraform components
at this time.
This also includes a minor change to the test helpers for the
backend/local package, which were inexplicably setting a SchemaVersion of
1 on the basic test state but setting the mock schema version to zero,
creating an invalid situation where the state would need to be downgraded.
Add support for the new `force-unlock` API and at the same time improve
performance a bit by reducing the amount of API calls made when using
the remote backend for state storage only.
Previously we were fetching these from the provider but then immediately
discarding the version numbers because the schema API had nowhere to put
them.
To avoid a late-breaking change to the internal structure of
terraform.ProviderSchema (which is constructed directly all over the
tests) we're retaining the resource type schemas in a new map alongside
the existing one with the same keys, rather than just switching to
using the providers.Schema struct directly there.
The methods that return resource type schemas now return two arguments,
intentionally creating a little API friction here so each new caller can
be reminded to think about whether they need to do something with the
schema version, though it can be ignored by many callers.
Since this was a breaking change to the Schemas API anyway, this also
fixes another API wart where there was a separate method for fetching
managed vs. data resource types and thus every caller ended up having a
switch statement on "mode". Now we just accept mode as an argument and
do the switch statement within the single SchemaForResourceType method.
* backend/azurerm: removing the `arm_` prefix from keys
* removing the deprecated fields test because the deprecation makes it fail
* authentication: support for custom resource manager endpoints
* Adding debug prefixes to the log statements
* adding acceptance tests for msi auth
* including the resource group name in the tests
* backend/azurerm: support for authenticating using a SAS Token
* resolving merge conflicts
* moving the defer to prior to the error
* backend/azurerm: support for authenticating via msi
* adding acceptance tests for msi auth
* including the resource group name in the tests
* support for using the test client via msi
* vendor updates
- updating to v21.3.0 of github.com/Azure/azure-sdk-for-go
- updating to v10.15.4 of github.com/Azure/go-autorest
- vendoring github.com/hashicorp/go-azure-helpers @ 0.1.1
* backend/azurerm: refactoring to use the new auth package
- refactoring the backend to use a shared client via the new auth package
- adding tests covering both Service Principal and Access Key auth
- support for authenticating using a proxy
- rewriting the backend documentation to include examples of both authentication types
* switching to use the build-in logging function
* documenting it's also possible to retrieve the access key from an env var
In order to support free organizations, we need a way to load the `remote` backend and then, depending on the used offering/plan, enable or disable remote operations.
In other words, we should be able to dynamically fall back to the `local` backend if needed, after first configuring the `remote` backend.
To make this works we need to change the way this was done previously when the env var `TF_FORCE_LOCAL_BACKEND` was set. The clear difference of course being that the env var would be available on startup, while the used offering/plan is only known after being able to connect to TFE.
The changes to how we handle setting the state path on the local backend
broke the heuristic we were using here for detecting migration from one
local backend to another with the same state path, which would by default
end up deleting the state altogether after migration.
We now use the StatePaths method to do this, which takes into account
both the default values and any settings that have been set.
Additionally this addresses a flaw in the old method which could
potentially have deleted all non-default workspace state files if the
"path" setting were changed without also changing the "workspace_dir"
setting. This new approach is conservative because it will preserve all
of the files if any one overlaps.
This was failing because we now handle the settings for the local backend
a little differently as a result of decoding it with the HCL2 machinery.
Specifically, the backend.State* fields are now assumed to be what is
given in configuration, and any CLI overrides are maintained separately
in OverrideState* fields so that they can be imposed "just in time" in
StatePaths.
This is particularly important because OverrideStatePath (when set) is
used regardless of workspace name, while StatePath is a suitable value
only for the "default" workspace, with others needing to be constructed
from StateWorkspaceDir instead.
Newer versions of the retryablehttp package use a context, so we need to
add that in our custom `CheckRetry` function.
In addition I removed the `return true, nil` to continue retrying in
case of an error, and instead directly call the `DefaultRetryPolicy`.
This is because the `DefaultRetryPolicy` will now also take the context
into consideration.
This new source type should be used for variables loaded from .tfvars files that were explicitly passed as command line arguments (e.g. -var-file=foo.tfvars)
This work was done against APIs that were already changed in the branch
before work began, and so it doesn't apply to the v0.12 development work.
To allow v0.12 to merge down to master, we'll revert this work out for now
and then re-introduce equivalent functionality in later commits that works
against the new APIs.
There are several steps here and a number of them can include reaching out
to remote servers or executing local processes, so it's helpful to have
some trace logs to better narrow down causes of errors and hangs during
this step.
In earlier refactoring we skipped implementing prior state safety checks,
propagating the target addresses from plan, and verifying that all of
the providers are exactly the same from the plan being created.
This change reinstates those checks, including a new error message for
the "stale plan" situation.
If we don't do this, we can't produce any output when applying a saved
plan file.
Here we also introduce a check to the local backend's ReportResult
function so that it won't panic if CLI init is skipped, although that
will no longer happen in the apply-from-file case due to the change
described in the previous paragraph.
We can't generate a valid plan file without a backend configuration to
write into it, but it's the responsibility of the caller (the command
package) to manage the backend configuration mechanism, so we require it
to tell us what to write here.
This feels a little strange because the backend in principle knows its
own config, but in practice the backend only knows the _processed_ version
of the config, not the raw configuration value that was used to configure
it.
converted the existing testPlanState() from terraform.State to
states.State to fix various plan tests.
reverted the "bandaid" in plans/planfile/tfplan.go - at this moment the
backend tests do not include backend configuration, and so the planfile
package can write the plan file but not read it back in. That will be
revisted in a separate track of work.
I have no confidence in the change to plans/planfile/tfplan.go. The
tests were passing an empty backend config, which planfile was able to
write to a file but not read from the same file. This change let me move
past that and it did not break any tests in the planfile package, but I
am concerned that it introduces undesired behavior.
The state manager refactoring in an earlier commit was reflected in the
implementations of these backends, but not in their tests. This gets us
back to a state where the backend tests will compile, and gets _most_ of
them passing again, with a few exceptions that will be addressed in a
subsequent commit.
incoming values
Addresses an odd state where the priorV of an object to be changed is
known but null.
While this situation should not happen, it seemed prudent to ensure that
core is resilient to providers sending incorrect values (which might
also occur with manually edited state).
Previously we used a single plan action "Replace" to represent both the
destroy-before-create and the create-before-destroy variants of replacing.
However, this forces the apply graph builder to jump through a lot of
hoops to figure out which nodes need it forced on and rebuild parts of
the graph to represent that.
If we instead decide between these two cases at plan time, the actual
determination of it is more straightforward because each resource is
represented by only one node in the plan graph, and then we can ensure
we put the right nodes in the graph during DiffTransformer and thus avoid
the logic for dealing with deposed instances being spread across various
different transformers and node types.
As a nice side-effect, this also allows us to show the difference between
destroy-then-create and create-then-destroy in the rendered diff in the
CLI, although this change doesn't fully implement that yet.
We're not yet showing outputs in the rendered diff, so it doesn't make
sense to count them for the purpose of deciding which change action
symbols to include in the legend.
This is a light adaptation of our earlier prototype of structural diff
rendering, as a starting point for what we'll actually ship. This is not
consistent with the latest mocks, so will need some additional work before
it is ready, but integrating this allows us to at least see the plan
contents while fixing up remaining issues elsewhere.
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.
The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.
The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.
Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
The "config" package is no longer used and will be removed as part
of the 0.12 release cleanup. Since configschema is part of the
"new world" of configuration modelling, it makes more sense for
it to live as a subdirectory of the newer "configs" package.
Due to how deeply the configuration types go into Terraform Core, there
isn't a great way to switch out to HCL2 gradually. As a consequence, this
huge commit gets us from the old state to a _compilable_ new state, but
does not yet attempt to fix any tests and has a number of known missing
parts and bugs. We will continue to iterate on this in forthcoming
commits, heading back towards passing tests and making Terraform
fully-functional again.
The three main goals here are:
- Use the configuration models from the "configs" package instead of the
older models in the "config" package, which is now deprecated and
preserved only to help us write our migration tool.
- Do expression inspection and evaluation using the functionality of the
new "lang" package, instead of the Interpolator type and related
functionality in the main "terraform" package.
- Represent addresses of various objects using types in the addrs package,
rather than hand-constructed strings. This is not critical to support
the above, but was a big help during the implementation of these other
points since it made it much more explicit what kind of address is
expected in each context.
Since our new packages are built to accommodate some future planned
features that are not yet implemented (e.g. the "for_each" argument on
resources, "count"/"for_each" on modules), and since there's still a fair
amount of functionality still using old-style APIs, there is a moderate
amount of shimming here to connect new assumptions with old, hopefully in
a way that makes it easier to find and eliminate these shims later.
I apologize in advance to the person who inevitably just found this huge
commit while spelunking through the commit history.
This is a rather-messy, complex change to get the "command" package
building again against the new backend API that was updated for
the new configuration loader.
A lot of this is mechanical rewriting to the new API, but
meta_config.go and meta_backend.go in particular saw some major
changes to interface with the new loader APIs and to deal with
the change in order of steps in the backend API.
The new config loader requires some steps to happen in a different
order, particularly in regard to knowing the schema in order to
decode the configuration.
Here we lean directly on the configschema package, rather than
on helper/schema.Backend as before, because it's generally
sufficient for our needs here and this prepares us for the
helper/schema package later moving out into its own repository
to seed a "plugin SDK".
If we get a diagnostic message that references a source range, and if the
source code for the referenced file is available, we'll show a snippet of
the source code with the source range highlighted.
At the moment we have no cache of source code, so in practice this
codepath can never be visited. Callers to format.Diagnostic will be
gradually updated in subsequent commits.
In some cases this is needed to keep the UX clean and to make sure any remote exit codes are passed through to the local process.
The most obvious example for this is when using the "remote" backend. This backend runs Terraform remotely and stream the output back to the local terminal.
When an error occurs during the remote execution, all the needed error information will already be in the streamed output. So if we then return an error ourselves, users will get the same errors twice.
By allowing the backend to specify the correct exit code, the UX remains the same while preserving the correct exit codes.
This is a bit of a hack to support the `-no-color` flag while we don’t have an option to set run variables.
That is also the reason why the orginal method is commented out instead of deleted. This will be reverted when the TFE starts supporting run variables.
If the policy passes, only show that instead of the full check output to prevent cluttering the output. So a passing policy will only show:
-----------------------------------------------
Organization policy check: passed
-----------------------------------------------
This commit adds:
- support for `-lock-timeout`
- custom error message when a 404 is received
- canceling a pending run when TF is Ctrl-C’ed
- discard a run when the apply is not approved
The pagination info of a list call that returns an empty list contains:
```go
CurrentPage: 1
TotalPages: 0
```
So checking if we have seen all pages using `CurrentPage == TotalPages` will not work and will result in an endless loop.
The tests are updated so they will fail (timeout after 1m) if this is handled incorreclty.
To prevent making unnecessary heavy calls to the backend, we should use a search query to limit the result.
But even if we use a search query, we should still use the pagination details to make sure we retrieved all items.
In TFE you can configure a workspace to use a custom working directory. When determining which directory that needs to be uploaded to TFE, this working directory should be taken into account to make sure we are uploading the correct root directory for the workspace.
Certain backends (currently only the `remote` backend) do not support using both the default and named workspaces at the same time.
To make the migration easier for users that currently use both types of workspaces, this commit adds logic to ask the user for a new workspace name during the migration process.
* cli: show workspace name in destroy confirmation
If the workspace name is not "default", include it in the confirmation
message for `terraform destroy`.
Fixes#15480
This was already added to triton-go and is now making its way to
the manta backend
```
% acctests backend/remote-state/manta
=== RUN TestBackend_impl
--- PASS: TestBackend_impl (0.00s)
=== RUN TestBackend
--- PASS: TestBackend (27.36s)
=== RUN TestBackendLocked
--- PASS: TestBackendLocked (16.24s)
=== RUN TestRemoteClient_impl
--- PASS: TestRemoteClient_impl (0.00s)
=== RUN TestRemoteClient
--- PASS: TestRemoteClient (3.40s)
=== RUN TestRemoteClientLocks
--- PASS: TestRemoteClientLocks (7.17s)
PASS
ok github.com/hashicorp/terraform/backend/remote-state/manta
```
Fixes: #17314
We now deal correctly with the creation of the state file - we were
not dealing well with a ResourceNotFound error
Now that this has been changed around, we try and create the statefile
and if there is an error, we look for an existing statefile - previously
this was not the order of operations
Simplify the use of clistate.Lock by creating a clistate.Locker
instance, which stores the context of locking a state, to allow unlock
to be called without knowledge of how the state was locked.
This alows the backend code to bring the needed UI methods to the point
where the state is locked, and still unlock the state from an outer
scope.
Provide a NoopLocker as well, so that callers can always call Unlock
without verifying the status of the lock.
Add the StateLocker field to the backend.Operation, so that the state
lock can be carried between the different function scopes of the backend
code. This will allow the backend context to lock the state before it's
read, while allowing the different operations to unlock the state when
they complete.
Fix the now failing state unlock test by reporting the correct ID.
The ID used by GCS is the generation number of the info object, which
isn't known until the info is already written out. While we can't get
the correct ID from the info data for the error rmessage, we can update
it with the generation number after it's read.
This adds a general test to verify that a remote state backend returns
the expected error type when it cannot lock a state. It then extracts
the ID reported in the error, and attempts to unlock the state using
that ID, which simulated the force-unlock scenario. This is a separate
test, since not all backends have persistent locks that can be unlocked
later.
We also split out the backend test to be called individually as needed.
Moves the nested select statements for backend operations into a single
function. The only difference in this part was that apply called
PersistState, which should be harmless regardless of the type of
operation being run.
If the user wishes to interrupt the running operation, only the first
interrupt was communicated to the operation by canceling the provided
context. A second interrupt would start the shutdown process, but not
communicate this to the running operation. This order of event could
cause partial writes of state.
What would happen is that once the command returns, the plugin system
would stop the provider processes. Once the provider processes dies, all
pending Eval operations would return return with an error, and quickly
cause the operation to complete. Since the backend code didn't know that
the process was shutting down imminently, it would continue by
attempting to write out the last known state. Under the right
conditions, the process would exit part way through the writing of the
state file.
Add Stop and Cancel CancelFuncs to the RunningOperation, to allow it to
easily differentiate between the two signals. The backend will then be
able to detect a shutdown and abort more gracefully.
In order to ensure that the backend is not in the process of writing the
state out, the command will always attempt to wait for the process to
complete after cancellation.
Since an early version of Terraform, the `destroy` command has always
had the `-force` flag to allow an auto approval of the interactive
prompt. 0.11 introduced `-auto-approve` as default to `false` when using
the `apply` command.
The `-auto-approve` flag was introduced to reduce ambiguity of it's
function, but the `-force` flag was never updated for a destroy.
People often use wrappers when automating commands in Terraform, and the
inconsistency between `apply` and `destroy` means that additional logic
must be added to the wrappers to do similar functions. Both commands are
more or less able to run with similar syntax, and also heavily share
their code.
This commit updates the command in `destroy` to use the `-auto-approve` flag
making working with the Terraform CLI a more consistent experience.
We leave in `-force` in `destroy` for the time-being and flag it as
deprecated to ensure a safe switchover period.
Internally, triton-go has changed how it handles errors. We can now get rid of
checking strings for errors, and we have introduced an errors library that
wraps some of the major errors we encounter and test for
Triton Manta allows an account other than the main triton account to be used via RBAC.
Here we expose the SDC_USER / TRITON_USER options to the backend so that a user can be specified.
This creates a unique bucket name for each test, so that the tests in
parallel don't collide, and buckets left over from interrupted tests
don't cause future failures.
Also make sure that buckets are removed, regardless of content.
The backend was creating bucket named in the configuration if it didn't
exist. We don't allow other backends to do this, because these are not
managed resources that terraform can control.
Previously there was a problem with double-locking when using the GCS backend with the terraform_remote_state data source.
Here we adjust the locking methodology to avoid that problem.
Validation is the best time to return detailed diagnostics
to the user since we're much more likely to have source
location information, etc than we are in later operations.
This change doesn't actually add any detail to the messages
yet, but it changes the interface so that we can gradually
introduce more detailed diagnostics over time.
While here there are some minor adjustments to some of the
messages to improve their consistency with terminology we
use elsewhere.
This PR changes manta from being a legacy remote state client to a new backend type. This also includes creating a simple lock within manta
This PR also unifies the way the triton client is configured (the schema) and also uses the same env vars to set the backend up
It is important to note that if the remote state path does not exist, then the backend will create that path. This means the user doesn't need to fall into a chicken and egg situation of creating the directory in advance before interacting with it
Reuse the running consul server for all tests.
Update the lostLockConnection package, since the api client should no
longer lose a lock immediately on network errors.
This is from a commit just after the v1.0.0 release, because it removes
the Porter service dependency for tests. The client api package was not
changed.
Previously we forced all remote state backends to be wrapped in a
BackupState wrapper that generates a local "terraform.tfstate.backup"
file before updating the remote state.
This backup mechanism was motivated by allowing users to recover a
previous state if user error caused an undesirable change such as loss
of the record of one or more resources. However, it also has the downside
of flushing a possibly-sensitive state to local disk in a location where
users may not realize its purpose and accidentally check it into version
control. Those using remote state would generally prefer that state never
be flushed to local disk at all.
The use-case of recovering older states can be dealt with for remote
backends by selecting a backend that has preservation of older versions
as a first-class feature, such as S3 versioning or Terraform Enterprise's
first-class historical state versioning mechanism.
There remains still one case where state can be flushed to local disk: if
a write to the remote backend fails during "terraform apply" then we will
still create the "errored.tfstate" file to allow the user to recover. This
seems like a reasonable compromise because this is done only in an
_exceptional_ case, and the console output makes it very clear that this
file has been created.
Fixes#15339.
Since bucket names must be *globally* unique. By including the project
ID in the bucket name we ensure that people don't step on each other's
feet when testing.
This calls backend.TestBackend() and remote.TestRemoteLocks() for
standardized acceptance tests. It removes custom listing tests since
those are performed by backend.TestBackend(), too.
Since each tests uses its own bucket, all tests can be run in parallel.
This resurrects the previously documented but unused "project" option.
This option is required to create buckets (so they are associated with the
right cloud project) but not to access the buckets later on (because their
names are globally unique).
The code is loosely based on state/remote/gcs_test.go. If the
GOOGLE_PROJECT environment variable is set, this test will
1) create a new bucket; error out if the bucket already exists.
2) create a new state
3) list states and ensure that the newly created state is listed
4) ensure that an object with the expected name exists
5) rum "state/remote".TestClient()
6) delete the state
The bucket is deleted when the test exits, though this may fail if the
bucket it not empty.
This config option was used by the legacy "gcs" client. If set, we're
using it for the default state -- all other states still use the
"state_dir" setting.
Calling context.Background() from outside the main() function is
discouraged. The configure functions are only called from
"…/helper/schema".Backend.Configure which provides the Background context,
i.e. a long-living context we can use for backend communication.
While #16243 added the ability to retry getting a state from S3, Put can
return the same InternalError status. Use the same retry logic when
uploading state to S3.
Add a way to inject network errors by setting an immediate deadline on
open consul connections. The consul client currently doesn't retry on
some errors, and will force us to lose our lock.
Once the consul api client is fixed, this test will fail.
The consul Client is analogous to an http.Client, and we really don't
need more than 1. Configure a single client and store it in the backend.
Replace the default Transport's Dialer to reduce the KeepAlive setting
from 30s to 17s. This avoids racing with the common network timeout
value of 30s, and is also coprime to other common intervals.
Internal errors from S3 are usually transient, and can be immediately retried.
Make 2 attempts at retreiving the state object before returning an error.
In #15884 we adjusted the plan output to give an explicit command to run
to apply a plan, whereas before this command was just alluded to in the
prose.
Since releasing that, we've got good feedback that it's confusing to
include such instructions when Terraform is running in a workflow
automation tool, because such tools usually abstract away exactly what
commands are run and require users to take different actions to
proceed through the workflow.
To accommodate such environments while retaining helpful messages for
normal CLI usage, here we introduce a new environment variable
TF_IN_AUTOMATION which, when set to a non-empty value, is a hint to
Terraform that it isn't being run in an interactive command shell and
it should thus tone down the "next steps" messaging.
The documentation for this setting is included as part of the "...in
automation" guide since it's not generally useful in other cases. We also
intentionally disclaim comprehensive support for this since we want to
avoid creating an extreme number of "if running in automation..."
codepaths that would increase the testing matrix and hurt maintainability.
The focus is specifically on the output of the three commands we give in
the automation guide, which at present means the following two situations:
* "terraform init" does not include the final paragraphs that suggest
running "terraform plan" and tell you in what situations you might need
to re-run "terraform init".
* "terraform plan" does not include the final paragraphs that either
warn about not specifying "-out=..." or instruct to run
"terraform apply" with the generated plan file.
The previous diff presentation was rather "wordy", and not very friendly
to those who can't see color either because they have color-blindness or
because they don't have a color-supporting terminal.
This new presentation uses the actual symbols used in the plan output
and tries to be more concise. It also uses some framing characters to
try to separate the different stages of "terraform plan" to make it
easier to visually navigate.
The apply command also adopts this new plan presentation, in preparation
for "terraform apply" (with interactive plan confirmation) becoming the
primary, safe workflow in the next major release.
Finally, we standardize on the terminology "perform" and "actions" rather
than "execute" and "changes" to reflect the fact that reading is now an
action and that isn't actually a _change_.
Previously the rendered plan output was constructed directly from the
core plan and then annotated with counts derived from the count hook.
At various places we applied little adjustments to deal with the fact that
the user-facing diff model is not identical to the internal diff model,
including the special handling of data source reads and destroys. Since
this logic was just muddled into the rendering code, it behaved
inconsistently with the tally of adds, updates and deletes.
This change reworks the plan formatter so that it happens in two stages:
- First, we produce a specialized Plan object that is tailored for use
in the UI. This applies all the relevant logic to transform the
physical model into the user model.
- Second, we do a straightforward visual rendering of the display-oriented
plan object.
For the moment this is slightly overkill since there's only one rendering
path, but it does give us the benefit of letting the counts be derived
from the same data as the full detailed diff, ensuring that they'll stay
consistent.
Later we may choose to have other UIs for plans, such as a
machine-readable output intended to drive a web UI. In that case, we'd
want the web UI to consume a serialization of the _display-oriented_ plan
so that it doesn't need to re-implement all of these UI special cases.
This introduces to core a new diff action type for "refresh". Currently
this is used _only_ in the UI layer, to represent data source reads.
Later it would be good to use this type for the core diff as well, to
improve consistency, but that is left for another day to keep this change
focused on the UI.
A TLS config was being assigned to a Transport in a nil http.Client. The
Transport is built in the consul config by default, but the http.Client
is not built until later in NewClient.
Go 1.9 adds this new function which, when called, marks the caller as
being a "helper function". Helper function stack frames are then skipped
when trying to find a line of test code to blame for a test failure, so
that the code in the main test function appears in the test failure output
rather than a line within the helper function itself.
This covers many -- but probaly not all -- of our test helpers across
various packages.
Added locking support via blob leasing (requires that an empty state is
created before any lock can be acquired.
Added support for "environments" in much the same way as the S3 backend.
S3 accepts objects with a leading slash and strips them off. This works
fine except in our workspace hierarchy, which then can no longer find
suffixes matching the full key name.
When remote backend imeplemtations create a new named state, they may
need to acquire a lock and/or save an actual empty state to the backend.
Copy this behavior in the inmem backend for testing.
Updated the vendored consul which no longer requires the channel adapter
to convert a `chan stuct{}` to a `<-chan struct{}`.
Call testutil.NewTestServerConfigT with the new signature.
Forward-port the plan state check from the 0.9 series.
0.10 has improved the serial handling for the state, so this adds
relevant comments and some more test coverage for the case of an
incrementing serial during apply.
When a consul lock is lost, there is a possibility that the associated
session is still active. Most commonly, the long request to watch the
lock key may error out, while the session is continually refreshed at a
rate of TTL/2.
First have the lock monitor retry the lock internally for at least 10
seconds (5 attempts with the default 2 second wait time). In most cases
this will reconnect on the first try, keeping the lock channel open.
If the consul lock can't recover itself, then cancel the session as soon
as possible (terminating the PreiodicRenew will call Session.Destroy),
and start over. In the worse case, the consul agents were split, and the
session still exists on the leader so we may need to wait for the old
session TTL, plus the LockWait time to renew the lock.
We use a Context for the cancellation channels here, because that
removes the need to worry about double-closes and nil channels. It
requires an awkward adapter goroutine for now to convert the Done()
`<-chan` to a `chan` for PeriodicRenew, but makes the rest of the code
safer in the long run.
Remote state implementations may initialize a lineage when creating a
new named state (i.e. "workspace"). The tests were ignoring that initial
lineage to write a new state to the backend.
A common reason to want to use `terraform plan` is to have a chance to
review and confirm a plan before running it. If in fact that is the
only reason you are running plan, this new `terraform apply -auto-approve=false`
flag provides an easier alternative to
P=$(mktemp -t plan)
terraform refresh
terraform plan -refresh=false -out=$P
terraform apply $P
rm $P
The flag defaults to true for now, but in a future version of Terraform it will
default to false.
Rather than overloading InstanceDiff with a "Stub" attribute that is
going to be largely meaningless, we are just going to skip
pre/post-diff hooks altogether. This is under the notion that we will
eventually not need to "stub" a diff for scale-out, stateless nodes on
refresh at all, so diff behaviour won't be necessary at that point, so
we should not assume that hooks will run at this stage anyway.
Also as part of this removed the CountHook test that is now failing
because CountHook is out of scope of the new behaviour.
We are changing the behaviour of the "stub" diff operation to just have
the pre/post-diff hooks skipped on eval, meaning that the test against
CountHook will ultimately be meaningless and fail, hence we need a
different test here that tests it on a more general level.
The s3.Backend was using it's own code for DeleteState, but the dynamo
entries are only handled through the RemoteClient. Have DeleteState use
a RemoteClient for delete.
During plan and apply, because the provider constraints need to be built
from a plan, they are not checked until the terraform.Context is
created. Since the context is always requested by the backend during the
Operation, the backend needs to be responsible for generating contextual
error messages for the user.
Instead of formatting the ResolveProviders errors during NewContext,
return a special error type, ResourceProviderError to signal that
init will be required. The backend can then extract and format the
errors.
Changed the language of this field to indicate that this diff is not a
"real" diff, in that it should not be acted on, versus a "quiet" mode,
which would indicate just simply to act silently.
This fixes a bug with the new refresh graph behaviour where a resource
was being counted twice in the UI on part of being scaled out:
* We are no longer transforming refresh nodes without state to
plannable resources (the transformer will be removed shortly)
* A Quiet flag has been added to EvalDiff and InstanceDiff - this
allows for the flagging of a diff that should not be treated as real
diff for purposes of planning
* When there is no state for a refresh node now, a new path is taken
that is similar to plan, but flags Quiet, and does nothing with the
diff afterwards.
Tests pending - light testing has confirmed this should fix the double
count issue, but we should have some tests to actually confirm the bug.
Move the Swift State from a legacy remote state to an official backend.
Add `container` and `archive_container` configuration variables, and deprecate `path` and `archive_path` variables.
Future improvements: Add support for locking and environments.
We're shifting terminology from "environment" to "workspace". This takes
care of some of the main internal API surface that was using the old
terminology, though is not intended to be entirely comprehensive and is
mainly just to minimize the amount of confusion for maintainers as we
continue moving towards eliminating the old terminology.
This allows you to run multiple concurrent terraform operations against
different environments from the same source directory.
Fixes#14447.
Also removes some dead code which appears to do the same thing as the function I
modified.
Rather than providing an already-resolved map of plugins to core, we now
provide a "provider resolver" which knows how to resolve a set of provider
dependencies, to be determined later, and produce that map.
This requires the context to be instantiated in a different way, so this
very noisy diff is a mostly-mechanical update of all of the existing
places where contexts get created for testing, using some adapted versions
of the pre-existing utilities for passing in mock providers.
This reverts commit b73d037761.
This commit seems to have introduced a race condition where we can
concurrently keep updating state after we've checked if we need to
increase the serial, and thus end up writing partial changes
to the state backend.
In the case of Terraform Enterprise, this fails altogether because
of the state hash consistency check it does.
Since the DynamoDB table used by the S3 backend is no longer only used
for locks, rename it in the config to remove any confusion about it
being lock-specific.
Consul locks are based on liveness, and may be lost due timeouts,
network issued, etc. If the client determines the lock was lost, attempt
to reacquire the lock immediately.
The client was also not using the `lock` config option. Disable locks if
that is not set.
The S3 client can return (nil, nil) when the remote state doesn't exist.
The caused a nil pointer dereference when checking the payload.MD5
against the expected value.
This can happen if the remote state was manually removed, but the digest
entry was left in the DynamoDB table.
When the backend operation is cancelled, immediately call PersistState.
The is a high likelihood that the user is going to terminate the process
early if the provider doesn't return in a timely manner, so persist as
much state as possible.
Have StateHook periodically call PersistState to flush any cached state
to permanent storage. This uses a minimal 10 second interval between
calls to PersistState.
Updates to objects in S3 are only eventually consistent. If the
RemoteClient has a DynamoDB table available, use that to store a
checksum of the last written state, so the object can be verified by the
next client to call Get.
Terraform currently doesn't have any sort of user feedback around
RefreshState/Get, so we poll only for a short time before returning an
error.
In the old remote state system we had the idea of a local backup, which
is actually still present for the legacy backends but no longer applies
for the new-style backends like the s3 backend.
It's problematic when an apply runs for long enough that someone's
time-limited AWS STS credentials expire and then Terraform fails and can't
persist state to S3.
To reduce the risk of lost state, here we add some extra fallback code
for the local apply operation in particular. If either state writing
or state persisting fail then we attempt to write the state to a special
backup file errored.tfstate, and produce an error message that guides the
user on how to retry uploading this state.
In the unlikely event that we can't write to local disk either (e.g.
permissions problems) we take a last-ditch attempt to dump the JSON onto
stdout and advise the user to manually copy it into a file for import.
If even that doesn't work for some reason, we assume a critical Terraform
bug (JSON-serialization problem with states?) and bail out with an
apologetic error message.
This is implemented for the apply command in particular because this is
the one command where new objects are created in real APIs that we don't
want to lose track of. For other operations it's less bad to just generate
a simple error message and have the user retry.
This fixes#14298.
The backend apply operation doesn't need to output the same text as the
cli itself. Instead notify the user that we are in the process of
stopping the operation.
stringer has changed the boilerplate it generates in a recent version.
We'd previously updated to the new format but accientally rolled back
to the old while merging a long-running feature branch.
This restores us back to the new format again.
The documentation for Refresh indicates that it will always return a
valid state, but that wasn't true in the case of a graph builder error.
While this same concept wasn't documented for Apply, it was still
assumed in the terraform apply code.
Since the helper testing framework relies on the absence of a state to
determine if it can call Destroy, the Context can't can't start
returning a state in all cases. Document this, and use the State method
to fetch the correct state value after Apply.
Add a nil check to the WriteState function, so that writing a nil state
is a noop.
Make sure to init before sorting the state, to make sure we're not
attempting to sort nil values. This isn't technically needed with the
current code, but it's just safer in general.
Prevent extra keys in the s3 envPrefix path from showing up as
listed environments.
Better handle keys containing slashes
Add tests for unexpected keys in s3.
This matches the consul cli behavior, where locks are cleaned up after
use.
Return an error from re-locking the state. This isn't required by the
Locker interface, but it's an added sanity check for state operations.
What was incorrect here was returning an empty ID and error, which would
indicate that Lock/Unlock isn't supported.
Use the aws provider code to create the clients for the s3 backend, so
that all the behavior matches that of the provider.
Remove the fake creds from the test, as the aws provider will attempt to
validate them.
Add fields required to create an appropriate context for all calls to
clistate.Lock.
Add missing checks for Meta.stateLock, where we would attempt to lock,
even if locking should be skipped.
- Have the ui Lock helper use state.LockWithContext.
- Rename the message package to clistate, since that's how it's imported
everywhere.
- Use a more idiomatic placement of the Context in the LockWithContext
args.
James Bardin