terraform/vendor/github.com/aws/aws-sdk-go/service/dynamodb/api.go

// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT.

// Package dynamodb provides a client for Amazon DynamoDB.
package dynamodb

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/aws/request"
)

const opBatchGetItem = "BatchGetItem"

// BatchGetItemRequest generates a "aws/request.Request" representing the
// client's request for the BatchGetItem operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the BatchGetItem method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the BatchGetItemRequest method.
//    req, resp := client.BatchGetItemRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) BatchGetItemRequest(input *BatchGetItemInput) (req *request.Request, output *BatchGetItemOutput) {
	op := &request.Operation{
		Name:       opBatchGetItem,
		HTTPMethod: "POST",
		HTTPPath:   "/",
		Paginator: &request.Paginator{
			InputTokens:     []string{"RequestItems"},
			OutputTokens:    []string{"UnprocessedKeys"},
			LimitToken:      "",
			TruncationToken: "",
		},
	}

	if input == nil {
		input = &BatchGetItemInput{}
	}

	req = c.newRequest(op, input, output)
	output = &BatchGetItemOutput{}
	req.Data = output
	return
}

// The BatchGetItem operation returns the attributes of one or more items from
// one or more tables. You identify requested items by primary key.
//
// A single operation can retrieve up to 16 MB of data, which can contain as
// many as 100 items. BatchGetItem will return a partial result if the response
// size limit is exceeded, the table's provisioned throughput is exceeded, or
// an internal processing failure occurs. If a partial result is returned, the
// operation returns a value for UnprocessedKeys. You can use this value to
// retry the operation starting with the next item to get.
//
//  If you request more than 100 items BatchGetItem will return a ValidationException
// with the message "Too many items requested for the BatchGetItem call".
//
//  For example, if you ask to retrieve 100 items, but each individual item
// is 300 KB in size, the system returns 52 items (so as not to exceed the 16
// MB limit). It also returns an appropriate UnprocessedKeys value so you can
// get the next page of results. If desired, your application can include its
// own logic to assemble the pages of results into one data set.
//
// If none of the items can be processed due to insufficient provisioned throughput
// on all of the tables in the request, then BatchGetItem will return a ProvisionedThroughputExceededException.
// If at least one of the items is successfully processed, then BatchGetItem
// completes successfully, while returning the keys of the unread items in UnprocessedKeys.
//
//  If DynamoDB returns any unprocessed items, you should retry the batch operation
// on those items. However, we strongly recommend that you use an exponential
// backoff algorithm. If you retry the batch operation immediately, the underlying
// read or write requests can still fail due to throttling on the individual
// tables. If you delay the batch operation using exponential backoff, the individual
// requests in the batch are much more likely to succeed.
//
// For more information, see Batch Operations and Error Handling (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ErrorHandling.html#BatchOperations)
// in the Amazon DynamoDB Developer Guide.
//
//  By default, BatchGetItem performs eventually consistent reads on every
// table in the request. If you want strongly consistent reads instead, you
// can set ConsistentRead to true for any or all tables.
//
// In order to minimize response latency, BatchGetItem retrieves items in parallel.
//
// When designing your application, keep in mind that DynamoDB does not return
// items in any particular order. To help parse the response by item, include
// the primary key values for the items in your request in the AttributesToGet
// parameter.
//
// If a requested item does not exist, it is not returned in the result. Requests
// for nonexistent items consume the minimum read capacity units according to
// the type of read. For more information, see Capacity Units Calculations (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithTables.html#CapacityUnitCalculations)
// in the Amazon DynamoDB Developer Guide.
func (c *DynamoDB) BatchGetItem(input *BatchGetItemInput) (*BatchGetItemOutput, error) {
	req, out := c.BatchGetItemRequest(input)
	err := req.Send()
	return out, err
}

// BatchGetItemPages iterates over the pages of a BatchGetItem operation,
// calling the "fn" function with the response data for each page. To stop
// iterating, return false from the fn function.
//
// See BatchGetItem method for more information on how to use this operation.
//
// Note: This operation can generate multiple requests to a service.
//
//    // Example iterating over at most 3 pages of a BatchGetItem operation.
//    pageNum := 0
//    err := client.BatchGetItemPages(params,
//        func(page *BatchGetItemOutput, lastPage bool) bool {
//            pageNum++
//            fmt.Println(page)
//            return pageNum <= 3
//        })
//
func (c *DynamoDB) BatchGetItemPages(input *BatchGetItemInput, fn func(p *BatchGetItemOutput, lastPage bool) (shouldContinue bool)) error {
	page, _ := c.BatchGetItemRequest(input)
	page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator"))
	return page.EachPage(func(p interface{}, lastPage bool) bool {
		return fn(p.(*BatchGetItemOutput), lastPage)
	})
}

const opBatchWriteItem = "BatchWriteItem"

// BatchWriteItemRequest generates a "aws/request.Request" representing the
// client's request for the BatchWriteItem operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the BatchWriteItem method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the BatchWriteItemRequest method.
//    req, resp := client.BatchWriteItemRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) BatchWriteItemRequest(input *BatchWriteItemInput) (req *request.Request, output *BatchWriteItemOutput) {
	op := &request.Operation{
		Name:       opBatchWriteItem,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &BatchWriteItemInput{}
	}

	req = c.newRequest(op, input, output)
	output = &BatchWriteItemOutput{}
	req.Data = output
	return
}

// The BatchWriteItem operation puts or deletes multiple items in one or more
// tables. A single call to BatchWriteItem can write up to 16 MB of data, which
// can comprise as many as 25 put or delete requests. Individual items to be
// written can be as large as 400 KB.
//
//   BatchWriteItem cannot update items. To update items, use the UpdateItem
// API.
//
//  The individual PutItem and DeleteItem operations specified in BatchWriteItem
// are atomic; however BatchWriteItem as a whole is not. If any requested operations
// fail because the table's provisioned throughput is exceeded or an internal
// processing failure occurs, the failed operations are returned in the UnprocessedItems
// response parameter. You can investigate and optionally resend the requests.
// Typically, you would call BatchWriteItem in a loop. Each iteration would
// check for unprocessed items and submit a new BatchWriteItem request with
// those unprocessed items until all items have been processed.
//
// Note that if none of the items can be processed due to insufficient provisioned
// throughput on all of the tables in the request, then BatchWriteItem will
// return a ProvisionedThroughputExceededException.
//
//  If DynamoDB returns any unprocessed items, you should retry the batch operation
// on those items. However, we strongly recommend that you use an exponential
// backoff algorithm. If you retry the batch operation immediately, the underlying
// read or write requests can still fail due to throttling on the individual
// tables. If you delay the batch operation using exponential backoff, the individual
// requests in the batch are much more likely to succeed.
//
// For more information, see Batch Operations and Error Handling (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ErrorHandling.html#BatchOperations)
// in the Amazon DynamoDB Developer Guide.
//
//  With BatchWriteItem, you can efficiently write or delete large amounts
// of data, such as from Amazon Elastic MapReduce (EMR), or copy data from another
// database into DynamoDB. In order to improve performance with these large-scale
// operations, BatchWriteItem does not behave in the same way as individual
// PutItem and DeleteItem calls would. For example, you cannot specify conditions
// on individual put and delete requests, and BatchWriteItem does not return
// deleted items in the response.
//
// If you use a programming language that supports concurrency, you can use
// threads to write items in parallel. Your application must include the necessary
// logic to manage the threads. With languages that don't support threading,
// you must update or delete the specified items one at a time. In both situations,
// BatchWriteItem provides an alternative where the API performs the specified
// put and delete operations in parallel, giving you the power of the thread
// pool approach without having to introduce complexity into your application.
//
// Parallel processing reduces latency, but each specified put and delete request
// consumes the same number of write capacity units whether it is processed
// in parallel or not. Delete operations on nonexistent items consume one write
// capacity unit.
//
// If one or more of the following is true, DynamoDB rejects the entire batch
// write operation:
//
//   One or more tables specified in the BatchWriteItem request does not exist.
//
//   Primary key attributes specified on an item in the request do not match
// those in the corresponding table's primary key schema.
//
//   You try to perform multiple operations on the same item in the same BatchWriteItem
// request. For example, you cannot put and delete the same item in the same
// BatchWriteItem request.
//
//   There are more than 25 requests in the batch.
//
//   Any individual item in a batch exceeds 400 KB.
//
//   The total request size exceeds 16 MB.
func (c *DynamoDB) BatchWriteItem(input *BatchWriteItemInput) (*BatchWriteItemOutput, error) {
	req, out := c.BatchWriteItemRequest(input)
	err := req.Send()
	return out, err
}

const opCreateTable = "CreateTable"

// CreateTableRequest generates a "aws/request.Request" representing the
// client's request for the CreateTable operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the CreateTable method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the CreateTableRequest method.
//    req, resp := client.CreateTableRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) CreateTableRequest(input *CreateTableInput) (req *request.Request, output *CreateTableOutput) {
	op := &request.Operation{
		Name:       opCreateTable,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &CreateTableInput{}
	}

	req = c.newRequest(op, input, output)
	output = &CreateTableOutput{}
	req.Data = output
	return
}

// The CreateTable operation adds a new table to your account. In an AWS account,
// table names must be unique within each region. That is, you can have two
// tables with same name if you create the tables in different regions.
//
//  CreateTable is an asynchronous operation. Upon receiving a CreateTable
// request, DynamoDB immediately returns a response with a TableStatus of CREATING.
// After the table is created, DynamoDB sets the TableStatus to ACTIVE. You
// can perform read and write operations only on an ACTIVE table.
//
// You can optionally define secondary indexes on the new table, as part of
// the CreateTable operation. If you want to create multiple tables with secondary
// indexes on them, you must create the tables sequentially. Only one table
// with secondary indexes can be in the CREATING state at any given time.
//
// You can use the DescribeTable API to check the table status.
func (c *DynamoDB) CreateTable(input *CreateTableInput) (*CreateTableOutput, error) {
	req, out := c.CreateTableRequest(input)
	err := req.Send()
	return out, err
}

const opDeleteItem = "DeleteItem"

// DeleteItemRequest generates a "aws/request.Request" representing the
// client's request for the DeleteItem operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the DeleteItem method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the DeleteItemRequest method.
//    req, resp := client.DeleteItemRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) DeleteItemRequest(input *DeleteItemInput) (req *request.Request, output *DeleteItemOutput) {
	op := &request.Operation{
		Name:       opDeleteItem,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &DeleteItemInput{}
	}

	req = c.newRequest(op, input, output)
	output = &DeleteItemOutput{}
	req.Data = output
	return
}

// Deletes a single item in a table by primary key. You can perform a conditional
// delete operation that deletes the item if it exists, or if it has an expected
// attribute value.
//
// In addition to deleting an item, you can also return the item's attribute
// values in the same operation, using the ReturnValues parameter.
//
// Unless you specify conditions, the DeleteItem is an idempotent operation;
// running it multiple times on the same item or attribute does not result in
// an error response.
//
// Conditional deletes are useful for deleting items only if specific conditions
// are met. If those conditions are met, DynamoDB performs the delete. Otherwise,
// the item is not deleted.
func (c *DynamoDB) DeleteItem(input *DeleteItemInput) (*DeleteItemOutput, error) {
	req, out := c.DeleteItemRequest(input)
	err := req.Send()
	return out, err
}

const opDeleteTable = "DeleteTable"

// DeleteTableRequest generates a "aws/request.Request" representing the
// client's request for the DeleteTable operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the DeleteTable method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the DeleteTableRequest method.
//    req, resp := client.DeleteTableRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) DeleteTableRequest(input *DeleteTableInput) (req *request.Request, output *DeleteTableOutput) {
	op := &request.Operation{
		Name:       opDeleteTable,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &DeleteTableInput{}
	}

	req = c.newRequest(op, input, output)
	output = &DeleteTableOutput{}
	req.Data = output
	return
}

// The DeleteTable operation deletes a table and all of its items. After a DeleteTable
// request, the specified table is in the DELETING state until DynamoDB completes
// the deletion. If the table is in the ACTIVE state, you can delete it. If
// a table is in CREATING or UPDATING states, then DynamoDB returns a ResourceInUseException.
// If the specified table does not exist, DynamoDB returns a ResourceNotFoundException.
// If table is already in the DELETING state, no error is returned.
//
//  DynamoDB might continue to accept data read and write operations, such
// as GetItem and PutItem, on a table in the DELETING state until the table
// deletion is complete.
//
//  When you delete a table, any indexes on that table are also deleted.
//
// If you have DynamoDB Streams enabled on the table, then the corresponding
// stream on that table goes into the DISABLED state, and the stream is automatically
// deleted after 24 hours.
//
// Use the DescribeTable API to check the status of the table.
func (c *DynamoDB) DeleteTable(input *DeleteTableInput) (*DeleteTableOutput, error) {
	req, out := c.DeleteTableRequest(input)
	err := req.Send()
	return out, err
}

const opDescribeLimits = "DescribeLimits"

// DescribeLimitsRequest generates a "aws/request.Request" representing the
// client's request for the DescribeLimits operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the DescribeLimits method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the DescribeLimitsRequest method.
//    req, resp := client.DescribeLimitsRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) DescribeLimitsRequest(input *DescribeLimitsInput) (req *request.Request, output *DescribeLimitsOutput) {
	op := &request.Operation{
		Name:       opDescribeLimits,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &DescribeLimitsInput{}
	}

	req = c.newRequest(op, input, output)
	output = &DescribeLimitsOutput{}
	req.Data = output
	return
}

// Returns the current provisioned-capacity limits for your AWS account in a
// region, both for the region as a whole and for any one DynamoDB table that
// you create there.
//
// When you establish an AWS account, the account has initial limits on the
// maximum read capacity units and write capacity units that you can provision
// across all of your DynamoDB tables in a given region. Also, there are per-table
// limits that apply when you create a table there. For more information, see
// Limits (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
// page in the Amazon DynamoDB Developer Guide.
//
// Although you can increase these limits by filing a case at AWS Support Center
// (https://console.aws.amazon.com/support/home#/), obtaining the increase is
// not instantaneous. The DescribeLimits API lets you write code to compare
// the capacity you are currently using to those limits imposed by your account
// so that you have enough time to apply for an increase before you hit a limit.
//
// For example, you could use one of the AWS SDKs to do the following:
//
//  Call DescribeLimits for a particular region to obtain your current account
// limits on provisioned capacity there.
//
//  Create a variable to hold the aggregate read capacity units provisioned
// for all your tables in that region, and one to hold the aggregate write capacity
// units. Zero them both.
//
//  Call ListTables to obtain a list of all your DynamoDB tables.
//
//   For each table name listed by ListTables, do the following:
//
//  Call DescribeTable with the table name.
//
//  Use the data returned by DescribeTable to add the read capacity units and
// write capacity units provisioned for the table itself to your variables.
//
//  If the table has one or more global secondary indexes (GSIs), loop over
// these GSIs and add their provisioned capacity values to your variables as
// well.
//
//    Report the account limits for that region returned by DescribeLimits,
// along with the total current provisioned capacity levels you have calculated.
//
//   This will let you see whether you are getting close to your account-level
// limits.
//
// The per-table limits apply only when you are creating a new table. They
// restrict the sum of the provisioned capacity of the new table itself and
// all its global secondary indexes.
//
// For existing tables and their GSIs, DynamoDB will not let you increase provisioned
// capacity extremely rapidly, but the only upper limit that applies is that
// the aggregate provisioned capacity over all your tables and GSIs cannot exceed
// either of the per-account limits.
//
//   DescribeLimits should only be called periodically. You can expect throttling
// errors if you call it more than once in a minute.
//
//  The DescribeLimits Request element has no content.
func (c *DynamoDB) DescribeLimits(input *DescribeLimitsInput) (*DescribeLimitsOutput, error) {
	req, out := c.DescribeLimitsRequest(input)
	err := req.Send()
	return out, err
}

const opDescribeTable = "DescribeTable"

// DescribeTableRequest generates a "aws/request.Request" representing the
// client's request for the DescribeTable operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the DescribeTable method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the DescribeTableRequest method.
//    req, resp := client.DescribeTableRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) DescribeTableRequest(input *DescribeTableInput) (req *request.Request, output *DescribeTableOutput) {
	op := &request.Operation{
		Name:       opDescribeTable,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &DescribeTableInput{}
	}

	req = c.newRequest(op, input, output)
	output = &DescribeTableOutput{}
	req.Data = output
	return
}

// Returns information about the table, including the current status of the
// table, when it was created, the primary key schema, and any indexes on the
// table.
//
//  If you issue a DescribeTable request immediately after a CreateTable request,
// DynamoDB might return a ResourceNotFoundException. This is because DescribeTable
// uses an eventually consistent query, and the metadata for your table might
// not be available at that moment. Wait for a few seconds, and then try the
// DescribeTable request again.
func (c *DynamoDB) DescribeTable(input *DescribeTableInput) (*DescribeTableOutput, error) {
	req, out := c.DescribeTableRequest(input)
	err := req.Send()
	return out, err
}

const opGetItem = "GetItem"

// GetItemRequest generates a "aws/request.Request" representing the
// client's request for the GetItem operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the GetItem method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the GetItemRequest method.
//    req, resp := client.GetItemRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) GetItemRequest(input *GetItemInput) (req *request.Request, output *GetItemOutput) {
	op := &request.Operation{
		Name:       opGetItem,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &GetItemInput{}
	}

	req = c.newRequest(op, input, output)
	output = &GetItemOutput{}
	req.Data = output
	return
}

// The GetItem operation returns a set of attributes for the item with the given
// primary key. If there is no matching item, GetItem does not return any data.
//
//  GetItem provides an eventually consistent read by default. If your application
// requires a strongly consistent read, set ConsistentRead to true. Although
// a strongly consistent read might take more time than an eventually consistent
// read, it always returns the last updated value.
func (c *DynamoDB) GetItem(input *GetItemInput) (*GetItemOutput, error) {
	req, out := c.GetItemRequest(input)
	err := req.Send()
	return out, err
}

const opListTables = "ListTables"

// ListTablesRequest generates a "aws/request.Request" representing the
// client's request for the ListTables operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the ListTables method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the ListTablesRequest method.
//    req, resp := client.ListTablesRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) ListTablesRequest(input *ListTablesInput) (req *request.Request, output *ListTablesOutput) {
	op := &request.Operation{
		Name:       opListTables,
		HTTPMethod: "POST",
		HTTPPath:   "/",
		Paginator: &request.Paginator{
			InputTokens:     []string{"ExclusiveStartTableName"},
			OutputTokens:    []string{"LastEvaluatedTableName"},
			LimitToken:      "Limit",
			TruncationToken: "",
		},
	}

	if input == nil {
		input = &ListTablesInput{}
	}

	req = c.newRequest(op, input, output)
	output = &ListTablesOutput{}
	req.Data = output
	return
}

// Returns an array of table names associated with the current account and endpoint.
// The output from ListTables is paginated, with each page returning a maximum
// of 100 table names.
func (c *DynamoDB) ListTables(input *ListTablesInput) (*ListTablesOutput, error) {
	req, out := c.ListTablesRequest(input)
	err := req.Send()
	return out, err
}

// ListTablesPages iterates over the pages of a ListTables operation,
// calling the "fn" function with the response data for each page. To stop
// iterating, return false from the fn function.
//
// See ListTables method for more information on how to use this operation.
//
// Note: This operation can generate multiple requests to a service.
//
//    // Example iterating over at most 3 pages of a ListTables operation.
//    pageNum := 0
//    err := client.ListTablesPages(params,
//        func(page *ListTablesOutput, lastPage bool) bool {
//            pageNum++
//            fmt.Println(page)
//            return pageNum <= 3
//        })
//
func (c *DynamoDB) ListTablesPages(input *ListTablesInput, fn func(p *ListTablesOutput, lastPage bool) (shouldContinue bool)) error {
	page, _ := c.ListTablesRequest(input)
	page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator"))
	return page.EachPage(func(p interface{}, lastPage bool) bool {
		return fn(p.(*ListTablesOutput), lastPage)
	})
}

const opPutItem = "PutItem"

// PutItemRequest generates a "aws/request.Request" representing the
// client's request for the PutItem operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the PutItem method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the PutItemRequest method.
//    req, resp := client.PutItemRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) PutItemRequest(input *PutItemInput) (req *request.Request, output *PutItemOutput) {
	op := &request.Operation{
		Name:       opPutItem,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &PutItemInput{}
	}

	req = c.newRequest(op, input, output)
	output = &PutItemOutput{}
	req.Data = output
	return
}

// Creates a new item, or replaces an old item with a new item. If an item that
// has the same primary key as the new item already exists in the specified
// table, the new item completely replaces the existing item. You can perform
// a conditional put operation (add a new item if one with the specified primary
// key doesn't exist), or replace an existing item if it has certain attribute
// values.
//
// In addition to putting an item, you can also return the item's attribute
// values in the same operation, using the ReturnValues parameter.
//
// When you add an item, the primary key attribute(s) are the only required
// attributes. Attribute values cannot be null. String and Binary type attributes
// must have lengths greater than zero. Set type attributes cannot be empty.
// Requests with empty values will be rejected with a ValidationException exception.
//
// You can request that PutItem return either a copy of the original item (before
// the update) or a copy of the updated item (after the update). For more information,
// see the ReturnValues description below.
//
//  To prevent a new item from replacing an existing item, use a conditional
// expression that contains the attribute_not_exists function with the name
// of the attribute being used as the partition key for the table. Since every
// record must contain that attribute, the attribute_not_exists function will
// only succeed if no matching item exists.
//
//  For more information about using this API, see Working with Items (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithItems.html)
// in the Amazon DynamoDB Developer Guide.
func (c *DynamoDB) PutItem(input *PutItemInput) (*PutItemOutput, error) {
	req, out := c.PutItemRequest(input)
	err := req.Send()
	return out, err
}

const opQuery = "Query"

// QueryRequest generates a "aws/request.Request" representing the
// client's request for the Query operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the Query method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the QueryRequest method.
//    req, resp := client.QueryRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) QueryRequest(input *QueryInput) (req *request.Request, output *QueryOutput) {
	op := &request.Operation{
		Name:       opQuery,
		HTTPMethod: "POST",
		HTTPPath:   "/",
		Paginator: &request.Paginator{
			InputTokens:     []string{"ExclusiveStartKey"},
			OutputTokens:    []string{"LastEvaluatedKey"},
			LimitToken:      "Limit",
			TruncationToken: "",
		},
	}

	if input == nil {
		input = &QueryInput{}
	}

	req = c.newRequest(op, input, output)
	output = &QueryOutput{}
	req.Data = output
	return
}

// A Query operation uses the primary key of a table or a secondary index to
// directly access items from that table or index.
//
// Use the KeyConditionExpression parameter to provide a specific value for
// the partition key. The Query operation will return all of the items from
// the table or index with that partition key value. You can optionally narrow
// the scope of the Query operation by specifying a sort key value and a comparison
// operator in KeyConditionExpression. You can use the ScanIndexForward parameter
// to get results in forward or reverse order, by sort key.
//
// Queries that do not return results consume the minimum number of read capacity
// units for that type of read operation.
//
// If the total number of items meeting the query criteria exceeds the result
// set size limit of 1 MB, the query stops and results are returned to the user
// with the LastEvaluatedKey element to continue the query in a subsequent operation.
// Unlike a Scan operation, a Query operation never returns both an empty result
// set and a LastEvaluatedKey value. LastEvaluatedKey is only provided if you
// have used the Limit parameter, or if the result set exceeds 1 MB (prior to
// applying a filter).
//
// You can query a table, a local secondary index, or a global secondary index.
// For a query on a table or on a local secondary index, you can set the ConsistentRead
// parameter to true and obtain a strongly consistent result. Global secondary
// indexes support eventually consistent reads only, so do not specify ConsistentRead
// when querying a global secondary index.
func (c *DynamoDB) Query(input *QueryInput) (*QueryOutput, error) {
	req, out := c.QueryRequest(input)
	err := req.Send()
	return out, err
}

// QueryPages iterates over the pages of a Query operation,
// calling the "fn" function with the response data for each page. To stop
// iterating, return false from the fn function.
//
// See Query method for more information on how to use this operation.
//
// Note: This operation can generate multiple requests to a service.
//
//    // Example iterating over at most 3 pages of a Query operation.
//    pageNum := 0
//    err := client.QueryPages(params,
//        func(page *QueryOutput, lastPage bool) bool {
//            pageNum++
//            fmt.Println(page)
//            return pageNum <= 3
//        })
//
func (c *DynamoDB) QueryPages(input *QueryInput, fn func(p *QueryOutput, lastPage bool) (shouldContinue bool)) error {
	page, _ := c.QueryRequest(input)
	page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator"))
	return page.EachPage(func(p interface{}, lastPage bool) bool {
		return fn(p.(*QueryOutput), lastPage)
	})
}

const opScan = "Scan"

// ScanRequest generates a "aws/request.Request" representing the
// client's request for the Scan operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the Scan method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the ScanRequest method.
//    req, resp := client.ScanRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) ScanRequest(input *ScanInput) (req *request.Request, output *ScanOutput) {
	op := &request.Operation{
		Name:       opScan,
		HTTPMethod: "POST",
		HTTPPath:   "/",
		Paginator: &request.Paginator{
			InputTokens:     []string{"ExclusiveStartKey"},
			OutputTokens:    []string{"LastEvaluatedKey"},
			LimitToken:      "Limit",
			TruncationToken: "",
		},
	}

	if input == nil {
		input = &ScanInput{}
	}

	req = c.newRequest(op, input, output)
	output = &ScanOutput{}
	req.Data = output
	return
}

// The Scan operation returns one or more items and item attributes by accessing
// every item in a table or a secondary index. To have DynamoDB return fewer
// items, you can provide a ScanFilter operation.
//
// If the total number of scanned items exceeds the maximum data set size limit
// of 1 MB, the scan stops and results are returned to the user as a LastEvaluatedKey
// value to continue the scan in a subsequent operation. The results also include
// the number of items exceeding the limit. A scan can result in no table data
// meeting the filter criteria.
//
// By default, Scan operations proceed sequentially; however, for faster performance
// on a large table or secondary index, applications can request a parallel
// Scan operation by providing the Segment and TotalSegments parameters. For
// more information, see Parallel Scan (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html#QueryAndScanParallelScan)
// in the Amazon DynamoDB Developer Guide.
//
// By default, Scan uses eventually consistent reads when accessing the data
// in a table; therefore, the result set might not include the changes to data
// in the table immediately before the operation began. If you need a consistent
// copy of the data, as of the time that the Scan begins, you can set the ConsistentRead
// parameter to true.
func (c *DynamoDB) Scan(input *ScanInput) (*ScanOutput, error) {
	req, out := c.ScanRequest(input)
	err := req.Send()
	return out, err
}

// ScanPages iterates over the pages of a Scan operation,
// calling the "fn" function with the response data for each page. To stop
// iterating, return false from the fn function.
//
// See Scan method for more information on how to use this operation.
//
// Note: This operation can generate multiple requests to a service.
//
//    // Example iterating over at most 3 pages of a Scan operation.
//    pageNum := 0
//    err := client.ScanPages(params,
//        func(page *ScanOutput, lastPage bool) bool {
//            pageNum++
//            fmt.Println(page)
//            return pageNum <= 3
//        })
//
func (c *DynamoDB) ScanPages(input *ScanInput, fn func(p *ScanOutput, lastPage bool) (shouldContinue bool)) error {
	page, _ := c.ScanRequest(input)
	page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator"))
	return page.EachPage(func(p interface{}, lastPage bool) bool {
		return fn(p.(*ScanOutput), lastPage)
	})
}

const opUpdateItem = "UpdateItem"

// UpdateItemRequest generates a "aws/request.Request" representing the
// client's request for the UpdateItem operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the UpdateItem method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the UpdateItemRequest method.
//    req, resp := client.UpdateItemRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) UpdateItemRequest(input *UpdateItemInput) (req *request.Request, output *UpdateItemOutput) {
	op := &request.Operation{
		Name:       opUpdateItem,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &UpdateItemInput{}
	}

	req = c.newRequest(op, input, output)
	output = &UpdateItemOutput{}
	req.Data = output
	return
}

// Edits an existing item's attributes, or adds a new item to the table if it
// does not already exist. You can put, delete, or add attribute values. You
// can also perform a conditional update on an existing item (insert a new attribute
// name-value pair if it doesn't exist, or replace an existing name-value pair
// if it has certain expected attribute values).
//
// You can also return the item's attribute values in the same UpdateItem operation
// using the ReturnValues parameter.
func (c *DynamoDB) UpdateItem(input *UpdateItemInput) (*UpdateItemOutput, error) {
	req, out := c.UpdateItemRequest(input)
	err := req.Send()
	return out, err
}

const opUpdateTable = "UpdateTable"

// UpdateTableRequest generates a "aws/request.Request" representing the
// client's request for the UpdateTable operation. The "output" return
// value can be used to capture response data after the request's "Send" method
// is called.
//
// Creating a request object using this method should be used when you want to inject
// custom logic into the request's lifecycle using a custom handler, or if you want to
// access properties on the request object before or after sending the request. If
// you just want the service response, call the UpdateTable method directly
// instead.
//
// Note: You must call the "Send" method on the returned request object in order
// to execute the request.
//
//    // Example sending a request using the UpdateTableRequest method.
//    req, resp := client.UpdateTableRequest(params)
//
//    err := req.Send()
//    if err == nil { // resp is now filled
//        fmt.Println(resp)
//    }
//
func (c *DynamoDB) UpdateTableRequest(input *UpdateTableInput) (req *request.Request, output *UpdateTableOutput) {
	op := &request.Operation{
		Name:       opUpdateTable,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &UpdateTableInput{}
	}

	req = c.newRequest(op, input, output)
	output = &UpdateTableOutput{}
	req.Data = output
	return
}

// Modifies the provisioned throughput settings, global secondary indexes, or
// DynamoDB Streams settings for a given table.
//
// You can only perform one of the following operations at once:
//
//   Modify the provisioned throughput settings of the table.
//
//   Enable or disable Streams on the table.
//
//   Remove a global secondary index from the table.
//
//   Create a new global secondary index on the table. Once the index begins
// backfilling, you can use UpdateTable to perform other operations.
//
//    UpdateTable is an asynchronous operation; while it is executing, the
// table status changes from ACTIVE to UPDATING. While it is UPDATING, you cannot
// issue another UpdateTable request. When the table returns to the ACTIVE state,
// the UpdateTable operation is complete.
func (c *DynamoDB) UpdateTable(input *UpdateTableInput) (*UpdateTableOutput, error) {
	req, out := c.UpdateTableRequest(input)
	err := req.Send()
	return out, err
}

// Represents an attribute for describing the key schema for the table and indexes.
type AttributeDefinition struct {
	_ struct{} `type:"structure"`

	// A name for the attribute.
	AttributeName *string `min:"1" type:"string" required:"true"`

	// The data type for the attribute, where:
	//
	//   S - the attribute is of type String
	//
	//   N - the attribute is of type Number
	//
	//   B - the attribute is of type Binary
	AttributeType *string `type:"string" required:"true" enum:"ScalarAttributeType"`
}

// String returns the string representation
func (s AttributeDefinition) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s AttributeDefinition) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *AttributeDefinition) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "AttributeDefinition"}
	if s.AttributeName == nil {
		invalidParams.Add(request.NewErrParamRequired("AttributeName"))
	}
	if s.AttributeName != nil && len(*s.AttributeName) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("AttributeName", 1))
	}
	if s.AttributeType == nil {
		invalidParams.Add(request.NewErrParamRequired("AttributeType"))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the data for an attribute. You can set one, and only one, of the
// elements.
//
// Each attribute in an item is a name-value pair. An attribute can be single-valued
// or multi-valued set. For example, a book item can have title and authors
// attributes. Each book has one title but can have many authors. The multi-valued
// attribute is a set; duplicate values are not allowed.
type AttributeValue struct {
	_ struct{} `type:"structure"`

	// A Binary data type.
	//
	// B is automatically base64 encoded/decoded by the SDK.
	B []byte `type:"blob"`

	// A Boolean data type.
	BOOL *bool `type:"boolean"`

	// A Binary Set data type.
	BS [][]byte `type:"list"`

	// A List of attribute values.
	L []*AttributeValue `type:"list"`

	// A Map of attribute values.
	M map[string]*AttributeValue `type:"map"`

	// A Number data type.
	N *string `type:"string"`

	// A Number Set data type.
	NS []*string `type:"list"`

	// A Null data type.
	NULL *bool `type:"boolean"`

	// A String data type.
	S *string `type:"string"`

	// A String Set data type.
	SS []*string `type:"list"`
}

// String returns the string representation
func (s AttributeValue) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s AttributeValue) GoString() string {
	return s.String()
}

// For the UpdateItem operation, represents the attributes to be modified, the
// action to perform on each, and the new value for each.
//
//  You cannot use UpdateItem to update any primary key attributes. Instead,
// you will need to delete the item, and then use PutItem to create a new item
// with new attributes.
//
//  Attribute values cannot be null; string and binary type attributes must
// have lengths greater than zero; and set type attributes must not be empty.
// Requests with empty values will be rejected with a ValidationException exception.
type AttributeValueUpdate struct {
	_ struct{} `type:"structure"`

	// Specifies how to perform the update. Valid values are PUT (default), DELETE,
	// and ADD. The behavior depends on whether the specified primary key already
	// exists in the table.
	//
	//  If an item with the specified Key is found in the table:
	//
	//    PUT - Adds the specified attribute to the item. If the attribute already
	// exists, it is replaced by the new value.
	//
	//    DELETE - If no value is specified, the attribute and its value are removed
	// from the item. The data type of the specified value must match the existing
	// value's data type.
	//
	// If a set of values is specified, then those values are subtracted from the
	// old set. For example, if the attribute value was the set [a,b,c] and the
	// DELETE action specified [a,c], then the final attribute value would be [b].
	// Specifying an empty set is an error.
	//
	//    ADD - If the attribute does not already exist, then the attribute and
	// its values are added to the item. If the attribute does exist, then the behavior
	// of ADD depends on the data type of the attribute:
	//
	//   If the existing attribute is a number, and if Value is also a number,
	// then the Value is mathematically added to the existing attribute. If Value
	// is a negative number, then it is subtracted from the existing attribute.
	//
	//   If you use ADD to increment or decrement a number value for an item that
	// doesn't exist before the update, DynamoDB uses 0 as the initial value.
	//
	// In addition, if you use ADD to update an existing item, and intend to increment
	// or decrement an attribute value which does not yet exist, DynamoDB uses 0
	// as the initial value. For example, suppose that the item you want to update
	// does not yet have an attribute named itemcount, but you decide to ADD the
	// number 3 to this attribute anyway, even though it currently does not exist.
	// DynamoDB will create the itemcount attribute, set its initial value to 0,
	// and finally add 3 to it. The result will be a new itemcount attribute in
	// the item, with a value of 3.
	//
	//    If the existing data type is a set, and if the Value is also a set, then
	// the Value is added to the existing set. (This is a set operation, not mathematical
	// addition.) For example, if the attribute value was the set [1,2], and the
	// ADD action specified [3], then the final attribute value would be [1,2,3].
	// An error occurs if an Add action is specified for a set attribute and the
	// attribute type specified does not match the existing set type.
	//
	// Both sets must have the same primitive data type. For example, if the existing
	// data type is a set of strings, the Value must also be a set of strings. The
	// same holds true for number sets and binary sets.
	//
	//   This action is only valid for an existing attribute whose data type is
	// number or is a set. Do not use ADD for any other data types.
	//
	//    If no item with the specified Key is found:
	//
	//    PUT - DynamoDB creates a new item with the specified primary key, and
	// then adds the attribute.
	//
	//    DELETE - Nothing happens; there is no attribute to delete.
	//
	//    ADD - DynamoDB creates an item with the supplied primary key and number
	// (or set of numbers) for the attribute value. The only data types allowed
	// are number and number set; no other data types can be specified.
	Action *string `type:"string" enum:"AttributeAction"`

	// Represents the data for an attribute. You can set one, and only one, of the
	// elements.
	//
	// Each attribute in an item is a name-value pair. An attribute can be single-valued
	// or multi-valued set. For example, a book item can have title and authors
	// attributes. Each book has one title but can have many authors. The multi-valued
	// attribute is a set; duplicate values are not allowed.
	Value *AttributeValue `type:"structure"`
}

// String returns the string representation
func (s AttributeValueUpdate) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s AttributeValueUpdate) GoString() string {
	return s.String()
}

// Represents the input of a BatchGetItem operation.
type BatchGetItemInput struct {
	_ struct{} `type:"structure"`

	// A map of one or more table names and, for each table, a map that describes
	// one or more items to retrieve from that table. Each table name can be used
	// only once per BatchGetItem request.
	//
	// Each element in the map of items to retrieve consists of the following:
	//
	//    ConsistentRead - If true, a strongly consistent read is used; if false
	// (the default), an eventually consistent read is used.
	//
	//    ExpressionAttributeNames - One or more substitution tokens for attribute
	// names in the ProjectionExpression parameter. The following are some use cases
	// for using ExpressionAttributeNames:
	//
	//   To access an attribute whose name conflicts with a DynamoDB reserved word.
	//
	//   To create a placeholder for repeating occurrences of an attribute name
	// in an expression.
	//
	//   To prevent special characters in an attribute name from being misinterpreted
	// in an expression.
	//
	//   Use the # character in an expression to dereference an attribute name.
	// For example, consider the following attribute name:
	//
	//    Percentile
	//
	//   The name of this attribute conflicts with a reserved word, so it cannot
	// be used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    {"#P":"Percentile"}
	//
	//   You could then use this substitution in an expression, as in this example:
	//
	//    #P = :val
	//
	//    Tokens that begin with the : character are expression attribute values,
	// which are placeholders for the actual value at runtime.
	//
	//  For more information on expression attribute names, see Accessing Item
	// Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//    Keys - An array of primary key attribute values that define specific
	// items in the table. For each primary key, you must provide all of the key
	// attributes. For example, with a simple primary key, you only need to provide
	// the partition key value. For a composite key, you must provide both the partition
	// key value and the sort key value.
	//
	//    ProjectionExpression - A string that identifies one or more attributes
	// to retrieve from the table. These attributes can include scalars, sets, or
	// elements of a JSON document. The attributes in the expression must be separated
	// by commas.
	//
	// If no attribute names are specified, then all attributes will be returned.
	// If any of the requested attributes are not found, they will not appear in
	// the result.
	//
	// For more information, see Accessing Item Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//    AttributesToGet -
	//
	//  This is a legacy parameter, for backward compatibility. New applications
	// should use ProjectionExpression instead. Do not combine legacy parameters
	// and expression parameters in a single API call; otherwise, DynamoDB will
	// return a ValidationException exception.
	//
	// This parameter allows you to retrieve attributes of type List or Map; however,
	// it cannot retrieve individual elements within a List or a Map.
	//
	//  The names of one or more attributes to retrieve. If no attribute names
	// are provided, then all attributes will be returned. If any of the requested
	// attributes are not found, they will not appear in the result.
	//
	// Note that AttributesToGet has no effect on provisioned throughput consumption.
	// DynamoDB determines capacity units consumed based on item size, not on the
	// amount of data that is returned to an application.
	RequestItems map[string]*KeysAndAttributes `min:"1" type:"map" required:"true"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    INDEXES - The response includes the aggregate ConsumedCapacity for the
	// operation, together with ConsumedCapacity for each table and secondary index
	// that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	// any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity
	// information for table(s).
	//
	//    TOTAL - The response includes only the aggregate ConsumedCapacity for
	// the operation.
	//
	//    NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`
}

// String returns the string representation
func (s BatchGetItemInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s BatchGetItemInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *BatchGetItemInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "BatchGetItemInput"}
	if s.RequestItems == nil {
		invalidParams.Add(request.NewErrParamRequired("RequestItems"))
	}
	if s.RequestItems != nil && len(s.RequestItems) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("RequestItems", 1))
	}
	if s.RequestItems != nil {
		for i, v := range s.RequestItems {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "RequestItems", i), err.(request.ErrInvalidParams))
			}
		}
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of a BatchGetItem operation.
type BatchGetItemOutput struct {
	_ struct{} `type:"structure"`

	// The read capacity units consumed by the operation.
	//
	// Each element consists of:
	//
	//    TableName - The table that consumed the provisioned throughput.
	//
	//    CapacityUnits - The total number of capacity units consumed.
	ConsumedCapacity []*ConsumedCapacity `type:"list"`

	// A map of table name to a list of items. Each object in Responses consists
	// of a table name, along with a map of attribute data consisting of the data
	// type and attribute value.
	Responses map[string][]map[string]*AttributeValue `type:"map"`

	// A map of tables and their respective keys that were not processed with the
	// current response. The UnprocessedKeys value is in the same form as RequestItems,
	// so the value can be provided directly to a subsequent BatchGetItem operation.
	// For more information, see RequestItems in the Request Parameters section.
	//
	// Each element consists of:
	//
	//    Keys - An array of primary key attribute values that define specific
	// items in the table.
	//
	//    AttributesToGet - One or more attributes to be retrieved from the table
	// or index. By default, all attributes are returned. If a requested attribute
	// is not found, it does not appear in the result.
	//
	//    ConsistentRead - The consistency of a read operation. If set to true,
	// then a strongly consistent read is used; otherwise, an eventually consistent
	// read is used.
	//
	//   If there are no unprocessed keys remaining, the response contains an empty
	// UnprocessedKeys map.
	UnprocessedKeys map[string]*KeysAndAttributes `min:"1" type:"map"`
}

// String returns the string representation
func (s BatchGetItemOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s BatchGetItemOutput) GoString() string {
	return s.String()
}

// Represents the input of a BatchWriteItem operation.
type BatchWriteItemInput struct {
	_ struct{} `type:"structure"`

	// A map of one or more table names and, for each table, a list of operations
	// to be performed (DeleteRequest or PutRequest). Each element in the map consists
	// of the following:
	//
	//    DeleteRequest - Perform a DeleteItem operation on the specified item.
	// The item to be deleted is identified by a Key subelement:
	//
	//    Key - A map of primary key attribute values that uniquely identify the
	// ! item. Each entry in this map consists of an attribute name and an attribute
	// value. For each primary key, you must provide all of the key attributes.
	// For example, with a simple primary key, you only need to provide a value
	// for the partition key. For a composite primary key, you must provide values
	// for both the partition key and the sort key.
	//
	//      PutRequest - Perform a PutItem operation on the specified item. The
	// item to be put is identified by an Item subelement:
	//
	//    Item - A map of attributes and their values. Each entry in this map consists
	// of an attribute name and an attribute value. Attribute values must not be
	// null; string and binary type attributes must have lengths greater than zero;
	// and set type attributes must not be empty. Requests that contain empty values
	// will be rejected with a ValidationException exception.
	//
	// If you specify any attributes that are part of an index key, then the data
	// types for those attributes must match those of the schema in the table's
	// attribute definition.
	RequestItems map[string][]*WriteRequest `min:"1" type:"map" required:"true"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    INDEXES - The response includes the aggregate ConsumedCapacity for the
	// operation, together with ConsumedCapacity for each table and secondary index
	// that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	// any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity
	// information for table(s).
	//
	//    TOTAL - The response includes only the aggregate ConsumedCapacity for
	// the operation.
	//
	//    NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// Determines whether item collection metrics are returned. If set to SIZE,
	// the response includes statistics about item collections, if any, that were
	// modified during the operation are returned in the response. If set to NONE
	// (the default), no statistics are returned.
	ReturnItemCollectionMetrics *string `type:"string" enum:"ReturnItemCollectionMetrics"`
}

// String returns the string representation
func (s BatchWriteItemInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s BatchWriteItemInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *BatchWriteItemInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "BatchWriteItemInput"}
	if s.RequestItems == nil {
		invalidParams.Add(request.NewErrParamRequired("RequestItems"))
	}
	if s.RequestItems != nil && len(s.RequestItems) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("RequestItems", 1))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of a BatchWriteItem operation.
type BatchWriteItemOutput struct {
	_ struct{} `type:"structure"`

	// The capacity units consumed by the operation.
	//
	// Each element consists of:
	//
	//    TableName - The table that consumed the provisioned throughput.
	//
	//    CapacityUnits - The total number of capacity units consumed.
	ConsumedCapacity []*ConsumedCapacity `type:"list"`

	// A list of tables that were processed by BatchWriteItem and, for each table,
	// information about any item collections that were affected by individual DeleteItem
	// or PutItem operations.
	//
	// Each entry consists of the following subelements:
	//
	//    ItemCollectionKey - The partition key value of the item collection. This
	// is the same as the partition key value of the item.
	//
	//    SizeEstimateRange - An estimate of item collection size, expressed in
	// GB. This is a two-element array containing a lower bound and an upper bound
	// for the estimate. The estimate includes the size of all the items in the
	// table, plus the size of all attributes projected into all of the local secondary
	// indexes on the table. Use this estimate to measure whether a local secondary
	// index is approaching its size limit.
	//
	// The estimate is subject to change over time; therefore, do not rely on the
	// precision or accuracy of the estimate.
	ItemCollectionMetrics map[string][]*ItemCollectionMetrics `type:"map"`

	// A map of tables and requests against those tables that were not processed.
	// The UnprocessedItems value is in the same form as RequestItems, so you can
	// provide this value directly to a subsequent BatchGetItem operation. For more
	// information, see RequestItems in the Request Parameters section.
	//
	// Each UnprocessedItems entry consists of a table name and, for that table,
	// a list of operations to perform (DeleteRequest or PutRequest).
	//
	//    DeleteRequest - Perform a DeleteItem operation on the specified item.
	// The item to be deleted is identified by a Key subelement:
	//
	//    Key - A map of primary key attribute values that uniquely identify the
	// item. Each entry in this map consists of an attribute name and an attribute
	// value.
	//
	//      PutRequest - Perform a PutItem operation on the specified item. The
	// item to be put is identified by an Item subelement:
	//
	//    Item - A map of attributes and their values. Each entry in this map consists
	// of an attribute name and an attribute value. Attribute values must not be
	// null; string and binary type attributes must have lengths greater than zero;
	// and set type attributes must not be empty. Requests that contain empty values
	// will be rejected with a ValidationException exception.
	//
	// If you specify any attributes that are part of an index key, then the data
	// types for those attributes must match those of the schema in the table's
	// attribute definition.
	//
	//     If there are no unprocessed items remaining, the response contains an
	// empty UnprocessedItems map.
	UnprocessedItems map[string][]*WriteRequest `min:"1" type:"map"`
}

// String returns the string representation
func (s BatchWriteItemOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s BatchWriteItemOutput) GoString() string {
	return s.String()
}

// Represents the amount of provisioned throughput capacity consumed on a table
// or an index.
type Capacity struct {
	_ struct{} `type:"structure"`

	// The total number of capacity units consumed on a table or an index.
	CapacityUnits *float64 `type:"double"`
}

// String returns the string representation
func (s Capacity) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s Capacity) GoString() string {
	return s.String()
}

// Represents the selection criteria for a Query or Scan operation:
//
//   For a Query operation, Condition is used for specifying the KeyConditions
// to use when querying a table or an index. For KeyConditions, only the following
// comparison operators are supported:
//
//  EQ | LE | LT | GE | GT | BEGINS_WITH | BETWEEN
//
//  Condition is also used in a QueryFilter, which evaluates the query results
// and returns only the desired values.
//
//   For a Scan operation, Condition is used in a ScanFilter, which evaluates
// the scan results and returns only the desired values.
type Condition struct {
	_ struct{} `type:"structure"`

	// One or more values to evaluate against the supplied attribute. The number
	// of values in the list depends on the ComparisonOperator being used.
	//
	// For type Number, value comparisons are numeric.
	//
	// String value comparisons for greater than, equals, or less than are based
	// on ASCII character code values. For example, a is greater than A, and a is
	// greater than B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
	// (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters).
	//
	// For Binary, DynamoDB treats each byte of the binary data as unsigned when
	// it compares binary values.
	AttributeValueList []*AttributeValue `type:"list"`

	// A comparator for evaluating attributes. For example, equals, greater than,
	// less than, etc.
	//
	// The following comparison operators are available:
	//
	//  EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS
	// | BEGINS_WITH | IN | BETWEEN
	//
	// The following are descriptions of each comparison operator.
	//
	//    EQ : Equal. EQ is supported for all datatypes, including lists and maps.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, Binary, String Set, Number Set, or Binary Set. If an item
	// contains an AttributeValue element of a different type than the one provided
	// in the request, the value does not match. For example, {"S":"6"} does not
	// equal {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//     NE : Not equal. NE is supported for all datatypes, including lists and
	// maps.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, Binary, String Set, Number Set, or Binary Set. If an item contains
	// an AttributeValue of a different type than the one provided in the request,
	// the value does not match. For example, {"S":"6"} does not equal {"N":"6"}.
	// Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//     LE : Less than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     LT : Less than.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GE : Greater than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GT : Greater than.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes,
	// including lists and maps.
	//
	//  This operator tests for the existence of an attribute, not its data type.
	// If the data type of attribute "a" is null, and you evaluate it using NOT_NULL,
	// the result is a Boolean true. This result is because the attribute "a" exists;
	// its data type is not relevant to the NOT_NULL comparison operator.
	//
	//     NULL : The attribute does not exist. NULL is supported for all datatypes,
	// including lists and maps.
	//
	//  This operator tests for the nonexistence of an attribute, not its data
	// type. If the data type of attribute "a" is null, and you evaluate it using
	// NULL, the result is a Boolean false. This is because the attribute "a" exists;
	// its data type is not relevant to the NULL comparison operator.
	//
	//     CONTAINS : Checks for a subsequence, or value in a set.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If the target attribute of the
	// comparison is of type String, then the operator checks for a substring match.
	// If the target attribute of the comparison is of type Binary, then the operator
	// looks for a subsequence of the target that matches the input. If the target
	// attribute of the comparison is a set ("SS", "NS", or "BS"), then the operator
	// evaluates to true if it finds an exact match with any member of the set.
	//
	// CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a" can
	// be a list; however, "b" cannot be a set, a map, or a list.
	//
	//    NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value
	// in a set.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If the target attribute of the
	// comparison is a String, then the operator checks for the absence of a substring
	// match. If the target attribute of the comparison is Binary, then the operator
	// checks for the absence of a subsequence of the target that matches the input.
	// If the target attribute of the comparison is a set ("SS", "NS", or "BS"),
	// then the operator evaluates to true if it does not find an exact match with
	// any member of the set.
	//
	// NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b",
	// "a" can be a list; however, "b" cannot be a set, a map, or a list.
	//
	//    BEGINS_WITH : Checks for a prefix.
	//
	//  AttributeValueList can contain only one AttributeValue of type String or
	// Binary (not a Number or a set type). The target attribute of the comparison
	// must be of type String or Binary (not a Number or a set type).
	//
	//     IN : Checks for matching elements within two sets.
	//
	//  AttributeValueList can contain one or more AttributeValue elements of type
	// String, Number, or Binary (not a set type). These attributes are compared
	// against an existing set type attribute of an item. If any elements of the
	// input set are present in the item attribute, the expression evaluates to
	// true.
	//
	//    BETWEEN : Greater than or equal to the first value, and less than or
	// equal to the second value.
	//
	//  AttributeValueList must contain two AttributeValue elements of the same
	// type, either String, Number, or Binary (not a set type). A target attribute
	// matches if the target value is greater than, or equal to, the first element
	// and less than, or equal to, the second element. If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not compare to {"N":"6"}. Also,
	// {"N":"6"} does not compare to {"NS":["6", "2", "1"]}
	//
	//   For usage examples of AttributeValueList and ComparisonOperator, see Legacy
	// Conditional Parameters (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.html)
	// in the Amazon DynamoDB Developer Guide.
	ComparisonOperator *string `type:"string" required:"true" enum:"ComparisonOperator"`
}

// String returns the string representation
func (s Condition) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s Condition) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *Condition) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "Condition"}
	if s.ComparisonOperator == nil {
		invalidParams.Add(request.NewErrParamRequired("ComparisonOperator"))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// The capacity units consumed by an operation. The data returned includes the
// total provisioned throughput consumed, along with statistics for the table
// and any indexes involved in the operation. ConsumedCapacity is only returned
// if the request asked for it. For more information, see Provisioned Throughput
// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
// in the Amazon DynamoDB Developer Guide.
type ConsumedCapacity struct {
	_ struct{} `type:"structure"`

	// The total number of capacity units consumed by the operation.
	CapacityUnits *float64 `type:"double"`

	// The amount of throughput consumed on each global index affected by the operation.
	GlobalSecondaryIndexes map[string]*Capacity `type:"map"`

	// The amount of throughput consumed on each local index affected by the operation.
	LocalSecondaryIndexes map[string]*Capacity `type:"map"`

	// The amount of throughput consumed on the table affected by the operation.
	Table *Capacity `type:"structure"`

	// The name of the table that was affected by the operation.
	TableName *string `min:"3" type:"string"`
}

// String returns the string representation
func (s ConsumedCapacity) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s ConsumedCapacity) GoString() string {
	return s.String()
}

// Represents a new global secondary index to be added to an existing table.
type CreateGlobalSecondaryIndexAction struct {
	_ struct{} `type:"structure"`

	// The name of the global secondary index to be created.
	IndexName *string `min:"3" type:"string" required:"true"`

	// The key schema for the global secondary index.
	KeySchema []*KeySchemaElement `min:"1" type:"list" required:"true"`

	// Represents attributes that are copied (projected) from the table into an
	// index. These are in addition to the primary key attributes and index key
	// attributes, which are automatically projected.
	Projection *Projection `type:"structure" required:"true"`

	// Represents the provisioned throughput settings for a specified table or index.
	// The settings can be modified using the UpdateTable operation.
	//
	// For current minimum and maximum provisioned throughput values, see Limits
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	ProvisionedThroughput *ProvisionedThroughput `type:"structure" required:"true"`
}

// String returns the string representation
func (s CreateGlobalSecondaryIndexAction) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s CreateGlobalSecondaryIndexAction) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *CreateGlobalSecondaryIndexAction) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "CreateGlobalSecondaryIndexAction"}
	if s.IndexName == nil {
		invalidParams.Add(request.NewErrParamRequired("IndexName"))
	}
	if s.IndexName != nil && len(*s.IndexName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("IndexName", 3))
	}
	if s.KeySchema == nil {
		invalidParams.Add(request.NewErrParamRequired("KeySchema"))
	}
	if s.KeySchema != nil && len(s.KeySchema) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("KeySchema", 1))
	}
	if s.Projection == nil {
		invalidParams.Add(request.NewErrParamRequired("Projection"))
	}
	if s.ProvisionedThroughput == nil {
		invalidParams.Add(request.NewErrParamRequired("ProvisionedThroughput"))
	}
	if s.KeySchema != nil {
		for i, v := range s.KeySchema {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "KeySchema", i), err.(request.ErrInvalidParams))
			}
		}
	}
	if s.Projection != nil {
		if err := s.Projection.Validate(); err != nil {
			invalidParams.AddNested("Projection", err.(request.ErrInvalidParams))
		}
	}
	if s.ProvisionedThroughput != nil {
		if err := s.ProvisionedThroughput.Validate(); err != nil {
			invalidParams.AddNested("ProvisionedThroughput", err.(request.ErrInvalidParams))
		}
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the input of a CreateTable operation.
type CreateTableInput struct {
	_ struct{} `type:"structure"`

	// An array of attributes that describe the key schema for the table and indexes.
	AttributeDefinitions []*AttributeDefinition `type:"list" required:"true"`

	// One or more global secondary indexes (the maximum is five) to be created
	// on the table. Each global secondary index in the array includes the following:
	//
	//    IndexName - The name of the global secondary index. Must be unique only
	// for this table.
	//
	//     KeySchema - Specifies the key schema for the global secondary index.
	//
	//    Projection - Specifies attributes that are copied (projected) from the
	// table into the index. These are in addition to the primary key attributes
	// and index key attributes, which are automatically projected. Each attribute
	// specification is composed of:
	//
	//    ProjectionType - One of the following:
	//
	//    KEYS_ONLY - Only the index and primary keys are projected into the index.
	//
	//    INCLUDE - Only the specified table attributes are projected into the
	// index. The list of projected attributes are in NonKeyAttributes.
	//
	//    ALL - All of the table attributes are projected into the index.
	//
	//      NonKeyAttributes - A list of one or more non-key attribute names that
	// are projected into the secondary index. The total count of attributes provided
	// in NonKeyAttributes, summed across all of the secondary indexes, must not
	// exceed 20. If you project the same attribute into two different indexes,
	// this counts as two distinct attributes when determining the total.
	//
	//      ProvisionedThroughput - The provisioned throughput settings for the
	// global secondary index, consisting of read and write capacity units.
	GlobalSecondaryIndexes []*GlobalSecondaryIndex `type:"list"`

	// Specifies the attributes that make up the primary key for a table or an index.
	// The attributes in KeySchema must also be defined in the AttributeDefinitions
	// array. For more information, see Data Model (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DataModel.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	// Each KeySchemaElement in the array is composed of:
	//
	//    AttributeName - The name of this key attribute.
	//
	//    KeyType - The role that the key attribute will assume:
	//
	//    HASH - partition key
	//
	//    RANGE - sort key
	//
	//      The partition key of an item is also known as its hash attribute. The
	// term "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	//
	//  For a simple primary key (partition key), you must provide exactly one
	// element with a KeyType of HASH.
	//
	// For a composite primary key (partition key and sort key), you must provide
	// exactly two elements, in this order: The first element must have a KeyType
	// of HASH, and the second element must have a KeyType of RANGE.
	//
	// For more information, see Specifying the Primary Key (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithTables.html#WorkingWithTables.primary.key)
	// in the Amazon DynamoDB Developer Guide.
	KeySchema []*KeySchemaElement `min:"1" type:"list" required:"true"`

	// One or more local secondary indexes (the maximum is five) to be created on
	// the table. Each index is scoped to a given partition key value. There is
	// a 10 GB size limit per partition key value; otherwise, the size of a local
	// secondary index is unconstrained.
	//
	// Each local secondary index in the array includes the following:
	//
	//    IndexName - The name of the local secondary index. Must be unique only
	// for this table.
	//
	//     KeySchema - Specifies the key schema for the local secondary index.
	// The key schema must begin with the same partition key as the table.
	//
	//    Projection - Specifies attributes that are copied (projected) from the
	// table into the index. These are in addition to the primary key attributes
	// and index key attributes, which are automatically projected. Each attribute
	// specification is composed of:
	//
	//    ProjectionType - One of the following:
	//
	//    KEYS_ONLY - Only the index and primary keys are projected into the index.
	//
	//    INCLUDE - Only the specified table attributes are projected into the
	// index. The list of projected attributes are in NonKeyAttributes.
	//
	//    ALL - All of the table attributes are projected into the index.
	//
	//      NonKeyAttributes - A list of one or more non-key attribute names that
	// are projected into the secondary index. The total count of attributes provided
	// in NonKeyAttributes, summed across all of the secondary indexes, must not
	// exceed 20. If you project the same attribute into two different indexes,
	// this counts as two distinct attributes when determining the total.
	LocalSecondaryIndexes []*LocalSecondaryIndex `type:"list"`

	// Represents the provisioned throughput settings for a specified table or index.
	// The settings can be modified using the UpdateTable operation.
	//
	// For current minimum and maximum provisioned throughput values, see Limits
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	ProvisionedThroughput *ProvisionedThroughput `type:"structure" required:"true"`

	// The settings for DynamoDB Streams on the table. These settings consist of:
	//
	//    StreamEnabled - Indicates whether Streams is to be enabled (true) or
	// disabled (false).
	//
	//    StreamViewType - When an item in the table is modified, StreamViewType
	// determines what information is written to the table's stream. Valid values
	// for StreamViewType are:
	//
	//    KEYS_ONLY - Only the key attributes of the modified item are written
	// to the stream.
	//
	//    NEW_IMAGE - The entire item, as it appears after it was modified, is
	// written to the stream.
	//
	//    OLD_IMAGE - The entire item, as it appeared before it was modified, is
	// written to the stream.
	//
	//    NEW_AND_OLD_IMAGES - Both the new and the old item images of the item
	// are written to the stream.
	StreamSpecification *StreamSpecification `type:"structure"`

	// The name of the table to create.
	TableName *string `min:"3" type:"string" required:"true"`
}

// String returns the string representation
func (s CreateTableInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s CreateTableInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *CreateTableInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "CreateTableInput"}
	if s.AttributeDefinitions == nil {
		invalidParams.Add(request.NewErrParamRequired("AttributeDefinitions"))
	}
	if s.KeySchema == nil {
		invalidParams.Add(request.NewErrParamRequired("KeySchema"))
	}
	if s.KeySchema != nil && len(s.KeySchema) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("KeySchema", 1))
	}
	if s.ProvisionedThroughput == nil {
		invalidParams.Add(request.NewErrParamRequired("ProvisionedThroughput"))
	}
	if s.TableName == nil {
		invalidParams.Add(request.NewErrParamRequired("TableName"))
	}
	if s.TableName != nil && len(*s.TableName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("TableName", 3))
	}
	if s.AttributeDefinitions != nil {
		for i, v := range s.AttributeDefinitions {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "AttributeDefinitions", i), err.(request.ErrInvalidParams))
			}
		}
	}
	if s.GlobalSecondaryIndexes != nil {
		for i, v := range s.GlobalSecondaryIndexes {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "GlobalSecondaryIndexes", i), err.(request.ErrInvalidParams))
			}
		}
	}
	if s.KeySchema != nil {
		for i, v := range s.KeySchema {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "KeySchema", i), err.(request.ErrInvalidParams))
			}
		}
	}
	if s.LocalSecondaryIndexes != nil {
		for i, v := range s.LocalSecondaryIndexes {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "LocalSecondaryIndexes", i), err.(request.ErrInvalidParams))
			}
		}
	}
	if s.ProvisionedThroughput != nil {
		if err := s.ProvisionedThroughput.Validate(); err != nil {
			invalidParams.AddNested("ProvisionedThroughput", err.(request.ErrInvalidParams))
		}
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of a CreateTable operation.
type CreateTableOutput struct {
	_ struct{} `type:"structure"`

	// Represents the properties of a table.
	TableDescription *TableDescription `type:"structure"`
}

// String returns the string representation
func (s CreateTableOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s CreateTableOutput) GoString() string {
	return s.String()
}

// Represents a global secondary index to be deleted from an existing table.
type DeleteGlobalSecondaryIndexAction struct {
	_ struct{} `type:"structure"`

	// The name of the global secondary index to be deleted.
	IndexName *string `min:"3" type:"string" required:"true"`
}

// String returns the string representation
func (s DeleteGlobalSecondaryIndexAction) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DeleteGlobalSecondaryIndexAction) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *DeleteGlobalSecondaryIndexAction) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "DeleteGlobalSecondaryIndexAction"}
	if s.IndexName == nil {
		invalidParams.Add(request.NewErrParamRequired("IndexName"))
	}
	if s.IndexName != nil && len(*s.IndexName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("IndexName", 3))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the input of a DeleteItem operation.
type DeleteItemInput struct {
	_ struct{} `type:"structure"`

	// A condition that must be satisfied in order for a conditional DeleteItem
	// to succeed.
	//
	// An expression can contain any of the following:
	//
	//   Functions: attribute_exists | attribute_not_exists | attribute_type |
	// contains | begins_with | size
	//
	// These function names are case-sensitive.
	//
	//   Comparison operators:  = | &#x3C;&#x3E; | &#x3C; | &#x3E; | &#x3C;= |
	// &#x3E;= | BETWEEN | IN
	//
	//    Logical operators: AND | OR | NOT
	//
	//   For more information on condition expressions, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//   ConditionExpression replaces the legacy ConditionalOperator and Expected
	// parameters.
	ConditionExpression *string `type:"string"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use ConditionExpression instead. Do not combine legacy parameters
	// and expression parameters in a single API call; otherwise, DynamoDB will
	// return a ValidationException exception.
	//
	//  A logical operator to apply to the conditions in the Expected map:
	//
	//    AND - If all of the conditions evaluate to true, then the entire map
	// evaluates to true.
	//
	//    OR - If at least one of the conditions evaluate to true, then the entire
	// map evaluates to true.
	//
	//   If you omit ConditionalOperator, then AND is the default.
	//
	// The operation will succeed only if the entire map evaluates to true.
	//
	//  This parameter does not support attributes of type List or Map.
	ConditionalOperator *string `type:"string" enum:"ConditionalOperator"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use ConditionExpression instead. Do not combine legacy parameters
	// and expression parameters in a single API call; otherwise, DynamoDB will
	// return a ValidationException exception.
	//
	//  A map of attribute/condition pairs. Expected provides a conditional block
	// for the DeleteItem operation.
	//
	// Each element of Expected consists of an attribute name, a comparison operator,
	// and one or more values. DynamoDB compares the attribute with the value(s)
	// you supplied, using the comparison operator. For each Expected element, the
	// result of the evaluation is either true or false.
	//
	// If you specify more than one element in the Expected map, then by default
	// all of the conditions must evaluate to true. In other words, the conditions
	// are ANDed together. (You can use the ConditionalOperator parameter to OR
	// the conditions instead. If you do this, then at least one of the conditions
	// must evaluate to true, rather than all of them.)
	//
	// If the Expected map evaluates to true, then the conditional operation succeeds;
	// otherwise, it fails.
	//
	//  Expected contains the following:
	//
	//    AttributeValueList - One or more values to evaluate against the supplied
	// attribute. The number of values in the list depends on the ComparisonOperator
	// being used.
	//
	// For type Number, value comparisons are numeric.
	//
	// String value comparisons for greater than, equals, or less than are based
	// on ASCII character code values. For example, a is greater than A, and a is
	// greater than B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
	// (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters).
	//
	// For type Binary, DynamoDB treats each byte of the binary data as unsigned
	// when it compares binary values.
	//
	//    ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList.
	// When performing the comparison, DynamoDB uses strongly consistent reads.
	//
	// The following comparison operators are available:
	//
	//  EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS
	// | BEGINS_WITH | IN | BETWEEN
	//
	// The following are descriptions of each comparison operator.
	//
	//    EQ : Equal. EQ is supported for all datatypes, including lists and maps.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, Binary, String Set, Number Set, or Binary Set. If an item
	// contains an AttributeValue element of a different type than the one provided
	// in the request, the value does not match. For example, {"S":"6"} does not
	// equal {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//     NE : Not equal. NE is supported for all datatypes, including lists and
	// maps.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, Binary, String Set, Number Set, or Binary Set. If an item contains
	// an AttributeValue of a different type than the one provided in the request,
	// the value does not match. For example, {"S":"6"} does not equal {"N":"6"}.
	// Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//     LE : Less than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     LT : Less than.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GE : Greater than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GT : Greater than.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes,
	// including lists and maps.
	//
	//  This operator tests for the existence of an attribute, not its data type.
	// If the data type of attribute "a" is null, and you evaluate it using NOT_NULL,
	// the result is a Boolean true. This result is because the attribute "a" exists;
	// its data type is not relevant to the NOT_NULL comparison operator.
	//
	//     NULL : The attribute does not exist. NULL is supported for all datatypes,
	// including lists and maps.
	//
	//  This operator tests for the nonexistence of an attribute, not its data
	// type. If the data type of attribute "a" is null, and you evaluate it using
	// NULL, the result is a Boolean false. This is because the attribute "a" exists;
	// its data type is not relevant to the NULL comparison operator.
	//
	//     CONTAINS : Checks for a subsequence, or value in a set.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If the target attribute of the
	// comparison is of type String, then the operator checks for a substring match.
	// If the target attribute of the comparison is of type Binary, then the operator
	// looks for a subsequence of the target that matches the input. If the target
	// attribute of the comparison is a set ("SS", "NS", or "BS"), then the operator
	// evaluates to true if it finds an exact match with any member of the set.
	//
	// CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a" can
	// be a list; however, "b" cannot be a set, a map, or a list.
	//
	//    NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value
	// in a set.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If the target attribute of the
	// comparison is a String, then the operator checks for the absence of a substring
	// match. If the target attribute of the comparison is Binary, then the operator
	// checks for the absence of a subsequence of the target that matches the input.
	// If the target attribute of the comparison is a set ("SS", "NS", or "BS"),
	// then the operator evaluates to true if it does not find an exact match with
	// any member of the set.
	//
	// NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b",
	// "a" can be a list; however, "b" cannot be a set, a map, or a list.
	//
	//    BEGINS_WITH : Checks for a prefix.
	//
	//  AttributeValueList can contain only one AttributeValue of type String or
	// Binary (not a Number or a set type). The target attribute of the comparison
	// must be of type String or Binary (not a Number or a set type).
	//
	//     IN : Checks for matching elements within two sets.
	//
	//  AttributeValueList can contain one or more AttributeValue elements of type
	// String, Number, or Binary (not a set type). These attributes are compared
	// against an existing set type attribute of an item. If any elements of the
	// input set are present in the item attribute, the expression evaluates to
	// true.
	//
	//    BETWEEN : Greater than or equal to the first value, and less than or
	// equal to the second value.
	//
	//  AttributeValueList must contain two AttributeValue elements of the same
	// type, either String, Number, or Binary (not a set type). A target attribute
	// matches if the target value is greater than, or equal to, the first element
	// and less than, or equal to, the second element. If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not compare to {"N":"6"}. Also,
	// {"N":"6"} does not compare to {"NS":["6", "2", "1"]}
	//
	//     For usage examples of AttributeValueList and ComparisonOperator, see
	// Legacy Conditional Parameters (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	// For backward compatibility with previous DynamoDB releases, the following
	// parameters can be used instead of AttributeValueList and ComparisonOperator:
	//
	//    Value - A value for DynamoDB to compare with an attribute.
	//
	//    Exists - A Boolean value that causes DynamoDB to evaluate the value before
	// attempting the conditional operation:
	//
	//   If Exists is true, DynamoDB will check to see if that attribute value
	// already exists in the table. If it is found, then the condition evaluates
	// to true; otherwise the condition evaluate to false.
	//
	//   If Exists is false, DynamoDB assumes that the attribute value does not
	// exist in the table. If in fact the value does not exist, then the assumption
	// is valid and the condition evaluates to true. If the value is found, despite
	// the assumption that it does not exist, the condition evaluates to false.
	//
	//   Note that the default value for Exists is true.
	//
	//   The Value and Exists parameters are incompatible with AttributeValueList
	// and ComparisonOperator. Note that if you use both sets of parameters at once,
	// DynamoDB will return a ValidationException exception.
	//
	//  This parameter does not support attributes of type List or Map.
	Expected map[string]*ExpectedAttributeValue `type:"map"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//   To access an attribute whose name conflicts with a DynamoDB reserved word.
	//
	//   To create a placeholder for repeating occurrences of an attribute name
	// in an expression.
	//
	//   To prevent special characters in an attribute name from being misinterpreted
	// in an expression.
	//
	//   Use the # character in an expression to dereference an attribute name.
	// For example, consider the following attribute name:
	//
	//    Percentile
	//
	//   The name of this attribute conflicts with a reserved word, so it cannot
	// be used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    {"#P":"Percentile"}
	//
	//   You could then use this substitution in an expression, as in this example:
	//
	//    #P = :val
	//
	//    Tokens that begin with the : character are expression attribute values,
	// which are placeholders for the actual value at runtime.
	//
	//  For more information on expression attribute names, see Accessing Item
	// Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// One or more values that can be substituted in an expression.
	//
	// Use the : (colon) character in an expression to dereference an attribute
	// value. For example, suppose that you wanted to check whether the value of
	// the ProductStatus attribute was one of the following:
	//
	//  Available | Backordered | Discontinued
	//
	// You would first need to specify ExpressionAttributeValues as follows:
	//
	//  { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"}
	// }
	//
	// You could then use these values in an expression, such as this:
	//
	//  ProductStatus IN (:avail, :back, :disc)
	//
	// For more information on expression attribute values, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeValues map[string]*AttributeValue `type:"map"`

	// A map of attribute names to AttributeValue objects, representing the primary
	// key of the item to delete.
	//
	// For the primary key, you must provide all of the attributes. For example,
	// with a simple primary key, you only need to provide a value for the partition
	// key. For a composite primary key, you must provide values for both the partition
	// key and the sort key.
	Key map[string]*AttributeValue `type:"map" required:"true"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    INDEXES - The response includes the aggregate ConsumedCapacity for the
	// operation, together with ConsumedCapacity for each table and secondary index
	// that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	// any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity
	// information for table(s).
	//
	//    TOTAL - The response includes only the aggregate ConsumedCapacity for
	// the operation.
	//
	//    NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// Determines whether item collection metrics are returned. If set to SIZE,
	// the response includes statistics about item collections, if any, that were
	// modified during the operation are returned in the response. If set to NONE
	// (the default), no statistics are returned.
	ReturnItemCollectionMetrics *string `type:"string" enum:"ReturnItemCollectionMetrics"`

	// Use ReturnValues if you want to get the item attributes as they appeared
	// before they were deleted. For DeleteItem, the valid values are:
	//
	//    NONE - If ReturnValues is not specified, or if its value is NONE, then
	// nothing is returned. (This setting is the default for ReturnValues.)
	//
	//    ALL_OLD - The content of the old item is returned.
	//
	//    The ReturnValues parameter is used by several DynamoDB operations; however,
	// DeleteItem does not recognize any values other than NONE or ALL_OLD.
	ReturnValues *string `type:"string" enum:"ReturnValue"`

	// The name of the table from which to delete the item.
	TableName *string `min:"3" type:"string" required:"true"`
}

// String returns the string representation
func (s DeleteItemInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DeleteItemInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *DeleteItemInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "DeleteItemInput"}
	if s.Key == nil {
		invalidParams.Add(request.NewErrParamRequired("Key"))
	}
	if s.TableName == nil {
		invalidParams.Add(request.NewErrParamRequired("TableName"))
	}
	if s.TableName != nil && len(*s.TableName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("TableName", 3))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of a DeleteItem operation.
type DeleteItemOutput struct {
	_ struct{} `type:"structure"`

	// A map of attribute names to AttributeValue objects, representing the item
	// as it appeared before the DeleteItem operation. This map appears in the response
	// only if ReturnValues was specified as ALL_OLD in the request.
	Attributes map[string]*AttributeValue `type:"map"`

	// The capacity units consumed by an operation. The data returned includes the
	// total provisioned throughput consumed, along with statistics for the table
	// and any indexes involved in the operation. ConsumedCapacity is only returned
	// if the request asked for it. For more information, see Provisioned Throughput
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// Information about item collections, if any, that were affected by the operation.
	// ItemCollectionMetrics is only returned if the request asked for it. If the
	// table does not have any local secondary indexes, this information is not
	// returned in the response.
	//
	// Each ItemCollectionMetrics element consists of:
	//
	//    ItemCollectionKey - The partition key value of the item collection. This
	// is the same as the partition key value of the item itself.
	//
	//    SizeEstimateRange - An estimate of item collection size, in gigabytes.
	// This value is a two-element array containing a lower bound and an upper bound
	// for the estimate. The estimate includes the size of all the items in the
	// table, plus the size of all attributes projected into all of the local secondary
	// indexes on that table. Use this estimate to measure whether a local secondary
	// index is approaching its size limit.
	//
	// The estimate is subject to change over time; therefore, do not rely on the
	// precision or accuracy of the estimate.
	ItemCollectionMetrics *ItemCollectionMetrics `type:"structure"`
}

// String returns the string representation
func (s DeleteItemOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DeleteItemOutput) GoString() string {
	return s.String()
}

// Represents a request to perform a DeleteItem operation on an item.
type DeleteRequest struct {
	_ struct{} `type:"structure"`

	// A map of attribute name to attribute values, representing the primary key
	// of the item to delete. All of the table's primary key attributes must be
	// specified, and their data types must match those of the table's key schema.
	Key map[string]*AttributeValue `type:"map" required:"true"`
}

// String returns the string representation
func (s DeleteRequest) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DeleteRequest) GoString() string {
	return s.String()
}

// Represents the input of a DeleteTable operation.
type DeleteTableInput struct {
	_ struct{} `type:"structure"`

	// The name of the table to delete.
	TableName *string `min:"3" type:"string" required:"true"`
}

// String returns the string representation
func (s DeleteTableInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DeleteTableInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *DeleteTableInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "DeleteTableInput"}
	if s.TableName == nil {
		invalidParams.Add(request.NewErrParamRequired("TableName"))
	}
	if s.TableName != nil && len(*s.TableName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("TableName", 3))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of a DeleteTable operation.
type DeleteTableOutput struct {
	_ struct{} `type:"structure"`

	// Represents the properties of a table.
	TableDescription *TableDescription `type:"structure"`
}

// String returns the string representation
func (s DeleteTableOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DeleteTableOutput) GoString() string {
	return s.String()
}

// Represents the input of a DescribeLimits operation. Has no content.
type DescribeLimitsInput struct {
	_ struct{} `type:"structure"`
}

// String returns the string representation
func (s DescribeLimitsInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DescribeLimitsInput) GoString() string {
	return s.String()
}

// Represents the output of a DescribeLimits operation.
type DescribeLimitsOutput struct {
	_ struct{} `type:"structure"`

	// The maximum total read capacity units that your account allows you to provision
	// across all of your tables in this region.
	AccountMaxReadCapacityUnits *int64 `min:"1" type:"long"`

	// The maximum total write capacity units that your account allows you to provision
	// across all of your tables in this region.
	AccountMaxWriteCapacityUnits *int64 `min:"1" type:"long"`

	// The maximum read capacity units that your account allows you to provision
	// for a new table that you are creating in this region, including the read
	// capacity units provisioned for its global secondary indexes (GSIs).
	TableMaxReadCapacityUnits *int64 `min:"1" type:"long"`

	// The maximum write capacity units that your account allows you to provision
	// for a new table that you are creating in this region, including the write
	// capacity units provisioned for its global secondary indexes (GSIs).
	TableMaxWriteCapacityUnits *int64 `min:"1" type:"long"`
}

// String returns the string representation
func (s DescribeLimitsOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DescribeLimitsOutput) GoString() string {
	return s.String()
}

// Represents the input of a DescribeTable operation.
type DescribeTableInput struct {
	_ struct{} `type:"structure"`

	// The name of the table to describe.
	TableName *string `min:"3" type:"string" required:"true"`
}

// String returns the string representation
func (s DescribeTableInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DescribeTableInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *DescribeTableInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "DescribeTableInput"}
	if s.TableName == nil {
		invalidParams.Add(request.NewErrParamRequired("TableName"))
	}
	if s.TableName != nil && len(*s.TableName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("TableName", 3))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of a DescribeTable operation.
type DescribeTableOutput struct {
	_ struct{} `type:"structure"`

	// Represents the properties of a table.
	Table *TableDescription `type:"structure"`
}

// String returns the string representation
func (s DescribeTableOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DescribeTableOutput) GoString() string {
	return s.String()
}

// Represents a condition to be compared with an attribute value. This condition
// can be used with DeleteItem, PutItem or UpdateItem operations; if the comparison
// evaluates to true, the operation succeeds; if not, the operation fails. You
// can use ExpectedAttributeValue in one of two different ways:
//
//   Use AttributeValueList to specify one or more values to compare against
// an attribute. Use ComparisonOperator to specify how you want to perform the
// comparison. If the comparison evaluates to true, then the conditional operation
// succeeds.
//
//   Use Value to specify a value that DynamoDB will compare against an attribute.
// If the values match, then ExpectedAttributeValue evaluates to true and the
// conditional operation succeeds. Optionally, you can also set Exists to false,
// indicating that you do not expect to find the attribute value in the table.
// In this case, the conditional operation succeeds only if the comparison evaluates
// to false.
//
//    Value and Exists are incompatible with AttributeValueList and ComparisonOperator.
// Note that if you use both sets of parameters at once, DynamoDB will return
// a ValidationException exception.
type ExpectedAttributeValue struct {
	_ struct{} `type:"structure"`

	// One or more values to evaluate against the supplied attribute. The number
	// of values in the list depends on the ComparisonOperator being used.
	//
	// For type Number, value comparisons are numeric.
	//
	// String value comparisons for greater than, equals, or less than are based
	// on ASCII character code values. For example, a is greater than A, and a is
	// greater than B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
	// (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters).
	//
	// For Binary, DynamoDB treats each byte of the binary data as unsigned when
	// it compares binary values.
	//
	// For information on specifying data types in JSON, see JSON Data Format (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DataFormat.html)
	// in the Amazon DynamoDB Developer Guide.
	AttributeValueList []*AttributeValue `type:"list"`

	// A comparator for evaluating attributes in the AttributeValueList. For example,
	// equals, greater than, less than, etc.
	//
	// The following comparison operators are available:
	//
	//  EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS
	// | BEGINS_WITH | IN | BETWEEN
	//
	// The following are descriptions of each comparison operator.
	//
	//    EQ : Equal. EQ is supported for all datatypes, including lists and maps.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, Binary, String Set, Number Set, or Binary Set. If an item
	// contains an AttributeValue element of a different type than the one provided
	// in the request, the value does not match. For example, {"S":"6"} does not
	// equal {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//     NE : Not equal. NE is supported for all datatypes, including lists and
	// maps.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, Binary, String Set, Number Set, or Binary Set. If an item contains
	// an AttributeValue of a different type than the one provided in the request,
	// the value does not match. For example, {"S":"6"} does not equal {"N":"6"}.
	// Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//     LE : Less than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     LT : Less than.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GE : Greater than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GT : Greater than.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes,
	// including lists and maps.
	//
	//  This operator tests for the existence of an attribute, not its data type.
	// If the data type of attribute "a" is null, and you evaluate it using NOT_NULL,
	// the result is a Boolean true. This result is because the attribute "a" exists;
	// its data type is not relevant to the NOT_NULL comparison operator.
	//
	//     NULL : The attribute does not exist. NULL is supported for all datatypes,
	// including lists and maps.
	//
	//  This operator tests for the nonexistence of an attribute, not its data
	// type. If the data type of attribute "a" is null, and you evaluate it using
	// NULL, the result is a Boolean false. This is because the attribute "a" exists;
	// its data type is not relevant to the NULL comparison operator.
	//
	//     CONTAINS : Checks for a subsequence, or value in a set.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If the target attribute of the
	// comparison is of type String, then the operator checks for a substring match.
	// If the target attribute of the comparison is of type Binary, then the operator
	// looks for a subsequence of the target that matches the input. If the target
	// attribute of the comparison is a set ("SS", "NS", or "BS"), then the operator
	// evaluates to true if it finds an exact match with any member of the set.
	//
	// CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a" can
	// be a list; however, "b" cannot be a set, a map, or a list.
	//
	//    NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value
	// in a set.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If the target attribute of the
	// comparison is a String, then the operator checks for the absence of a substring
	// match. If the target attribute of the comparison is Binary, then the operator
	// checks for the absence of a subsequence of the target that matches the input.
	// If the target attribute of the comparison is a set ("SS", "NS", or "BS"),
	// then the operator evaluates to true if it does not find an exact match with
	// any member of the set.
	//
	// NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b",
	// "a" can be a list; however, "b" cannot be a set, a map, or a list.
	//
	//    BEGINS_WITH : Checks for a prefix.
	//
	//  AttributeValueList can contain only one AttributeValue of type String or
	// Binary (not a Number or a set type). The target attribute of the comparison
	// must be of type String or Binary (not a Number or a set type).
	//
	//     IN : Checks for matching elements within two sets.
	//
	//  AttributeValueList can contain one or more AttributeValue elements of type
	// String, Number, or Binary (not a set type). These attributes are compared
	// against an existing set type attribute of an item. If any elements of the
	// input set are present in the item attribute, the expression evaluates to
	// true.
	//
	//    BETWEEN : Greater than or equal to the first value, and less than or
	// equal to the second value.
	//
	//  AttributeValueList must contain two AttributeValue elements of the same
	// type, either String, Number, or Binary (not a set type). A target attribute
	// matches if the target value is greater than, or equal to, the first element
	// and less than, or equal to, the second element. If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not compare to {"N":"6"}. Also,
	// {"N":"6"} does not compare to {"NS":["6", "2", "1"]}
	ComparisonOperator *string `type:"string" enum:"ComparisonOperator"`

	// Causes DynamoDB to evaluate the value before attempting a conditional operation:
	//
	//   If Exists is true, DynamoDB will check to see if that attribute value
	// already exists in the table. If it is found, then the operation succeeds.
	// If it is not found, the operation fails with a ConditionalCheckFailedException.
	//
	//   If Exists is false, DynamoDB assumes that the attribute value does not
	// exist in the table. If in fact the value does not exist, then the assumption
	// is valid and the operation succeeds. If the value is found, despite the assumption
	// that it does not exist, the operation fails with a ConditionalCheckFailedException.
	//
	//   The default setting for Exists is true. If you supply a Value all by itself,
	// DynamoDB assumes the attribute exists: You don't have to set Exists to true,
	// because it is implied.
	//
	// DynamoDB returns a ValidationException if:
	//
	//    Exists is true but there is no Value to check. (You expect a value to
	// exist, but don't specify what that value is.)
	//
	//    Exists is false but you also provide a Value. (You cannot expect an attribute
	// to have a value, while also expecting it not to exist.)
	Exists *bool `type:"boolean"`

	// Represents the data for an attribute. You can set one, and only one, of the
	// elements.
	//
	// Each attribute in an item is a name-value pair. An attribute can be single-valued
	// or multi-valued set. For example, a book item can have title and authors
	// attributes. Each book has one title but can have many authors. The multi-valued
	// attribute is a set; duplicate values are not allowed.
	Value *AttributeValue `type:"structure"`
}

// String returns the string representation
func (s ExpectedAttributeValue) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s ExpectedAttributeValue) GoString() string {
	return s.String()
}

// Represents the input of a GetItem operation.
type GetItemInput struct {
	_ struct{} `type:"structure"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use ProjectionExpression instead. Do not combine legacy parameters
	// and expression parameters in a single API call; otherwise, DynamoDB will
	// return a ValidationException exception.
	//
	// This parameter allows you to retrieve attributes of type List or Map; however,
	// it cannot retrieve individual elements within a List or a Map.
	//
	//  The names of one or more attributes to retrieve. If no attribute names
	// are provided, then all attributes will be returned. If any of the requested
	// attributes are not found, they will not appear in the result.
	//
	// Note that AttributesToGet has no effect on provisioned throughput consumption.
	// DynamoDB determines capacity units consumed based on item size, not on the
	// amount of data that is returned to an application.
	AttributesToGet []*string `min:"1" type:"list"`

	// Determines the read consistency model: If set to true, then the operation
	// uses strongly consistent reads; otherwise, the operation uses eventually
	// consistent reads.
	ConsistentRead *bool `type:"boolean"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//   To access an attribute whose name conflicts with a DynamoDB reserved word.
	//
	//   To create a placeholder for repeating occurrences of an attribute name
	// in an expression.
	//
	//   To prevent special characters in an attribute name from being misinterpreted
	// in an expression.
	//
	//   Use the # character in an expression to dereference an attribute name.
	// For example, consider the following attribute name:
	//
	//    Percentile
	//
	//   The name of this attribute conflicts with a reserved word, so it cannot
	// be used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    {"#P":"Percentile"}
	//
	//   You could then use this substitution in an expression, as in this example:
	//
	//    #P = :val
	//
	//    Tokens that begin with the : character are expression attribute values,
	// which are placeholders for the actual value at runtime.
	//
	//  For more information on expression attribute names, see Accessing Item
	// Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// A map of attribute names to AttributeValue objects, representing the primary
	// key of the item to retrieve.
	//
	// For the primary key, you must provide all of the attributes. For example,
	// with a simple primary key, you only need to provide a value for the partition
	// key. For a composite primary key, you must provide values for both the partition
	// key and the sort key.
	Key map[string]*AttributeValue `type:"map" required:"true"`

	// A string that identifies one or more attributes to retrieve from the table.
	// These attributes can include scalars, sets, or elements of a JSON document.
	// The attributes in the expression must be separated by commas.
	//
	// If no attribute names are specified, then all attributes will be returned.
	// If any of the requested attributes are not found, they will not appear in
	// the result.
	//
	// For more information, see Accessing Item Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//   ProjectionExpression replaces the legacy AttributesToGet parameter.
	ProjectionExpression *string `type:"string"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    INDEXES - The response includes the aggregate ConsumedCapacity for the
	// operation, together with ConsumedCapacity for each table and secondary index
	// that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	// any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity
	// information for table(s).
	//
	//    TOTAL - The response includes only the aggregate ConsumedCapacity for
	// the operation.
	//
	//    NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// The name of the table containing the requested item.
	TableName *string `min:"3" type:"string" required:"true"`
}

// String returns the string representation
func (s GetItemInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s GetItemInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *GetItemInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "GetItemInput"}
	if s.AttributesToGet != nil && len(s.AttributesToGet) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("AttributesToGet", 1))
	}
	if s.Key == nil {
		invalidParams.Add(request.NewErrParamRequired("Key"))
	}
	if s.TableName == nil {
		invalidParams.Add(request.NewErrParamRequired("TableName"))
	}
	if s.TableName != nil && len(*s.TableName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("TableName", 3))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of a GetItem operation.
type GetItemOutput struct {
	_ struct{} `type:"structure"`

	// The capacity units consumed by an operation. The data returned includes the
	// total provisioned throughput consumed, along with statistics for the table
	// and any indexes involved in the operation. ConsumedCapacity is only returned
	// if the request asked for it. For more information, see Provisioned Throughput
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// A map of attribute names to AttributeValue objects, as specified by AttributesToGet.
	Item map[string]*AttributeValue `type:"map"`
}

// String returns the string representation
func (s GetItemOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s GetItemOutput) GoString() string {
	return s.String()
}

// Represents the properties of a global secondary index.
type GlobalSecondaryIndex struct {
	_ struct{} `type:"structure"`

	// The name of the global secondary index. The name must be unique among all
	// other indexes on this table.
	IndexName *string `min:"3" type:"string" required:"true"`

	// The complete key schema for a global secondary index, which consists of one
	// or more pairs of attribute names and key types:
	//
	//    HASH - partition key
	//
	//    RANGE - sort key
	//
	//    The partition key of an item is also known as its hash attribute. The
	// term "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	KeySchema []*KeySchemaElement `min:"1" type:"list" required:"true"`

	// Represents attributes that are copied (projected) from the table into an
	// index. These are in addition to the primary key attributes and index key
	// attributes, which are automatically projected.
	Projection *Projection `type:"structure" required:"true"`

	// Represents the provisioned throughput settings for a specified table or index.
	// The settings can be modified using the UpdateTable operation.
	//
	// For current minimum and maximum provisioned throughput values, see Limits
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	ProvisionedThroughput *ProvisionedThroughput `type:"structure" required:"true"`
}

// String returns the string representation
func (s GlobalSecondaryIndex) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s GlobalSecondaryIndex) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *GlobalSecondaryIndex) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "GlobalSecondaryIndex"}
	if s.IndexName == nil {
		invalidParams.Add(request.NewErrParamRequired("IndexName"))
	}
	if s.IndexName != nil && len(*s.IndexName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("IndexName", 3))
	}
	if s.KeySchema == nil {
		invalidParams.Add(request.NewErrParamRequired("KeySchema"))
	}
	if s.KeySchema != nil && len(s.KeySchema) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("KeySchema", 1))
	}
	if s.Projection == nil {
		invalidParams.Add(request.NewErrParamRequired("Projection"))
	}
	if s.ProvisionedThroughput == nil {
		invalidParams.Add(request.NewErrParamRequired("ProvisionedThroughput"))
	}
	if s.KeySchema != nil {
		for i, v := range s.KeySchema {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "KeySchema", i), err.(request.ErrInvalidParams))
			}
		}
	}
	if s.Projection != nil {
		if err := s.Projection.Validate(); err != nil {
			invalidParams.AddNested("Projection", err.(request.ErrInvalidParams))
		}
	}
	if s.ProvisionedThroughput != nil {
		if err := s.ProvisionedThroughput.Validate(); err != nil {
			invalidParams.AddNested("ProvisionedThroughput", err.(request.ErrInvalidParams))
		}
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the properties of a global secondary index.
type GlobalSecondaryIndexDescription struct {
	_ struct{} `type:"structure"`

	// Indicates whether the index is currently backfilling. Backfilling is the
	// process of reading items from the table and determining whether they can
	// be added to the index. (Not all items will qualify: For example, a partition
	// key cannot have any duplicate values.) If an item can be added to the index,
	// DynamoDB will do so. After all items have been processed, the backfilling
	// operation is complete and Backfilling is false.
	//
	//  For indexes that were created during a CreateTable operation, the Backfilling
	// attribute does not appear in the DescribeTable output.
	Backfilling *bool `type:"boolean"`

	// The Amazon Resource Name (ARN) that uniquely identifies the index.
	IndexArn *string `type:"string"`

	// The name of the global secondary index.
	IndexName *string `min:"3" type:"string"`

	// The total size of the specified index, in bytes. DynamoDB updates this value
	// approximately every six hours. Recent changes might not be reflected in this
	// value.
	IndexSizeBytes *int64 `type:"long"`

	// The current state of the global secondary index:
	//
	//    CREATING - The index is being created.
	//
	//    UPDATING - The index is being updated.
	//
	//    DELETING - The index is being deleted.
	//
	//    ACTIVE - The index is ready for use.
	IndexStatus *string `type:"string" enum:"IndexStatus"`

	// The number of items in the specified index. DynamoDB updates this value approximately
	// every six hours. Recent changes might not be reflected in this value.
	ItemCount *int64 `type:"long"`

	// The complete key schema for a global secondary index, which consists of one
	// or more pairs of attribute names and key types:
	//
	//    HASH - partition key
	//
	//    RANGE - sort key
	//
	//    The partition key of an item is also known as its hash attribute. The
	// term "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	KeySchema []*KeySchemaElement `min:"1" type:"list"`

	// Represents attributes that are copied (projected) from the table into an
	// index. These are in addition to the primary key attributes and index key
	// attributes, which are automatically projected.
	Projection *Projection `type:"structure"`

	// Represents the provisioned throughput settings for the table, consisting
	// of read and write capacity units, along with data about increases and decreases.
	ProvisionedThroughput *ProvisionedThroughputDescription `type:"structure"`
}

// String returns the string representation
func (s GlobalSecondaryIndexDescription) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s GlobalSecondaryIndexDescription) GoString() string {
	return s.String()
}

// Represents one of the following:
//
//   A new global secondary index to be added to an existing table.
//
//   New provisioned throughput parameters for an existing global secondary
// index.
//
//   An existing global secondary index to be removed from an existing table.
type GlobalSecondaryIndexUpdate struct {
	_ struct{} `type:"structure"`

	// The parameters required for creating a global secondary index on an existing
	// table:
	//
	//    IndexName
	//
	//    KeySchema
	//
	//    AttributeDefinitions
	//
	//    Projection
	//
	//    ProvisionedThroughput
	Create *CreateGlobalSecondaryIndexAction `type:"structure"`

	// The name of an existing global secondary index to be removed.
	Delete *DeleteGlobalSecondaryIndexAction `type:"structure"`

	// The name of an existing global secondary index, along with new provisioned
	// throughput settings to be applied to that index.
	Update *UpdateGlobalSecondaryIndexAction `type:"structure"`
}

// String returns the string representation
func (s GlobalSecondaryIndexUpdate) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s GlobalSecondaryIndexUpdate) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *GlobalSecondaryIndexUpdate) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "GlobalSecondaryIndexUpdate"}
	if s.Create != nil {
		if err := s.Create.Validate(); err != nil {
			invalidParams.AddNested("Create", err.(request.ErrInvalidParams))
		}
	}
	if s.Delete != nil {
		if err := s.Delete.Validate(); err != nil {
			invalidParams.AddNested("Delete", err.(request.ErrInvalidParams))
		}
	}
	if s.Update != nil {
		if err := s.Update.Validate(); err != nil {
			invalidParams.AddNested("Update", err.(request.ErrInvalidParams))
		}
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Information about item collections, if any, that were affected by the operation.
// ItemCollectionMetrics is only returned if the request asked for it. If the
// table does not have any local secondary indexes, this information is not
// returned in the response.
type ItemCollectionMetrics struct {
	_ struct{} `type:"structure"`

	// The partition key value of the item collection. This value is the same as
	// the partition key value of the item.
	ItemCollectionKey map[string]*AttributeValue `type:"map"`

	// An estimate of item collection size, in gigabytes. This value is a two-element
	// array containing a lower bound and an upper bound for the estimate. The estimate
	// includes the size of all the items in the table, plus the size of all attributes
	// projected into all of the local secondary indexes on that table. Use this
	// estimate to measure whether a local secondary index is approaching its size
	// limit.
	//
	// The estimate is subject to change over time; therefore, do not rely on the
	// precision or accuracy of the estimate.
	SizeEstimateRangeGB []*float64 `type:"list"`
}

// String returns the string representation
func (s ItemCollectionMetrics) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s ItemCollectionMetrics) GoString() string {
	return s.String()
}

// Represents a single element of a key schema. A key schema specifies the attributes
// that make up the primary key of a table, or the key attributes of an index.
//
// A KeySchemaElement represents exactly one attribute of the primary key.
// For example, a simple primary key would be represented by one KeySchemaElement
// (for the partition key). A composite primary key would require one KeySchemaElement
// for the partition key, and another KeySchemaElement for the sort key.
//
// A KeySchemaElement must be a scalar, top-level attribute (not a nested attribute).
// The data type must be one of String, Number, or Binary. The attribute cannot
// be nested within a List or a Map.
type KeySchemaElement struct {
	_ struct{} `type:"structure"`

	// The name of a key attribute.
	AttributeName *string `min:"1" type:"string" required:"true"`

	// The role that this key attribute will assume:
	//
	//    HASH - partition key
	//
	//    RANGE - sort key
	//
	//    The partition key of an item is also known as its hash attribute. The
	// term "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	KeyType *string `type:"string" required:"true" enum:"KeyType"`
}

// String returns the string representation
func (s KeySchemaElement) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s KeySchemaElement) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *KeySchemaElement) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "KeySchemaElement"}
	if s.AttributeName == nil {
		invalidParams.Add(request.NewErrParamRequired("AttributeName"))
	}
	if s.AttributeName != nil && len(*s.AttributeName) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("AttributeName", 1))
	}
	if s.KeyType == nil {
		invalidParams.Add(request.NewErrParamRequired("KeyType"))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents a set of primary keys and, for each key, the attributes to retrieve
// from the table.
//
// For each primary key, you must provide all of the key attributes. For example,
// with a simple primary key, you only need to provide the partition key. For
// a composite primary key, you must provide both the partition key and the
// sort key.
type KeysAndAttributes struct {
	_ struct{} `type:"structure"`

	// One or more attributes to retrieve from the table or index. If no attribute
	// names are specified then all attributes will be returned. If any of the specified
	// attributes are not found, they will not appear in the result.
	AttributesToGet []*string `min:"1" type:"list"`

	// The consistency of a read operation. If set to true, then a strongly consistent
	// read is used; otherwise, an eventually consistent read is used.
	ConsistentRead *bool `type:"boolean"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//   To access an attribute whose name conflicts with a DynamoDB reserved word.
	//
	//   To create a placeholder for repeating occurrences of an attribute name
	// in an expression.
	//
	//   To prevent special characters in an attribute name from being misinterpreted
	// in an expression.
	//
	//   Use the # character in an expression to dereference an attribute name.
	// For example, consider the following attribute name:
	//
	//    Percentile
	//
	//   The name of this attribute conflicts with a reserved word, so it cannot
	// be used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    {"#P":"Percentile"}
	//
	//   You could then use this substitution in an expression, as in this example:
	//
	//    #P = :val
	//
	//    Tokens that begin with the : character are expression attribute values,
	// which are placeholders for the actual value at runtime.
	//
	//  For more information on expression attribute names, see Accessing Item
	// Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// The primary key attribute values that define the items and the attributes
	// associated with the items.
	Keys []map[string]*AttributeValue `min:"1" type:"list" required:"true"`

	// A string that identifies one or more attributes to retrieve from the table.
	// These attributes can include scalars, sets, or elements of a JSON document.
	// The attributes in the ProjectionExpression must be separated by commas.
	//
	// If no attribute names are specified, then all attributes will be returned.
	// If any of the requested attributes are not found, they will not appear in
	// the result.
	//
	// For more information, see Accessing Item Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//   ProjectionExpression replaces the legacy AttributesToGet parameter.
	ProjectionExpression *string `type:"string"`
}

// String returns the string representation
func (s KeysAndAttributes) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s KeysAndAttributes) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *KeysAndAttributes) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "KeysAndAttributes"}
	if s.AttributesToGet != nil && len(s.AttributesToGet) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("AttributesToGet", 1))
	}
	if s.Keys == nil {
		invalidParams.Add(request.NewErrParamRequired("Keys"))
	}
	if s.Keys != nil && len(s.Keys) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("Keys", 1))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the input of a ListTables operation.
type ListTablesInput struct {
	_ struct{} `type:"structure"`

	// The first table name that this operation will evaluate. Use the value that
	// was returned for LastEvaluatedTableName in a previous operation, so that
	// you can obtain the next page of results.
	ExclusiveStartTableName *string `min:"3" type:"string"`

	// A maximum number of table names to return. If this parameter is not specified,
	// the limit is 100.
	Limit *int64 `min:"1" type:"integer"`
}

// String returns the string representation
func (s ListTablesInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s ListTablesInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *ListTablesInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "ListTablesInput"}
	if s.ExclusiveStartTableName != nil && len(*s.ExclusiveStartTableName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("ExclusiveStartTableName", 3))
	}
	if s.Limit != nil && *s.Limit < 1 {
		invalidParams.Add(request.NewErrParamMinValue("Limit", 1))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of a ListTables operation.
type ListTablesOutput struct {
	_ struct{} `type:"structure"`

	// The name of the last table in the current page of results. Use this value
	// as the ExclusiveStartTableName in a new request to obtain the next page of
	// results, until all the table names are returned.
	//
	// If you do not receive a LastEvaluatedTableName value in the response, this
	// means that there are no more table names to be retrieved.
	LastEvaluatedTableName *string `min:"3" type:"string"`

	// The names of the tables associated with the current account at the current
	// endpoint. The maximum size of this array is 100.
	//
	// If LastEvaluatedTableName also appears in the output, you can use this value
	// as the ExclusiveStartTableName parameter in a subsequent ListTables request
	// and obtain the next page of results.
	TableNames []*string `type:"list"`
}

// String returns the string representation
func (s ListTablesOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s ListTablesOutput) GoString() string {
	return s.String()
}

// Represents the properties of a local secondary index.
type LocalSecondaryIndex struct {
	_ struct{} `type:"structure"`

	// The name of the local secondary index. The name must be unique among all
	// other indexes on this table.
	IndexName *string `min:"3" type:"string" required:"true"`

	// The complete key schema for the local secondary index, consisting of one
	// or more pairs of attribute names and key types:
	//
	//    HASH - partition key
	//
	//    RANGE - sort key
	//
	//    The partition key of an item is also known as its hash attribute. The
	// term "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	KeySchema []*KeySchemaElement `min:"1" type:"list" required:"true"`

	// Represents attributes that are copied (projected) from the table into an
	// index. These are in addition to the primary key attributes and index key
	// attributes, which are automatically projected.
	Projection *Projection `type:"structure" required:"true"`
}

// String returns the string representation
func (s LocalSecondaryIndex) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s LocalSecondaryIndex) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *LocalSecondaryIndex) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "LocalSecondaryIndex"}
	if s.IndexName == nil {
		invalidParams.Add(request.NewErrParamRequired("IndexName"))
	}
	if s.IndexName != nil && len(*s.IndexName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("IndexName", 3))
	}
	if s.KeySchema == nil {
		invalidParams.Add(request.NewErrParamRequired("KeySchema"))
	}
	if s.KeySchema != nil && len(s.KeySchema) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("KeySchema", 1))
	}
	if s.Projection == nil {
		invalidParams.Add(request.NewErrParamRequired("Projection"))
	}
	if s.KeySchema != nil {
		for i, v := range s.KeySchema {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "KeySchema", i), err.(request.ErrInvalidParams))
			}
		}
	}
	if s.Projection != nil {
		if err := s.Projection.Validate(); err != nil {
			invalidParams.AddNested("Projection", err.(request.ErrInvalidParams))
		}
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the properties of a local secondary index.
type LocalSecondaryIndexDescription struct {
	_ struct{} `type:"structure"`

	// The Amazon Resource Name (ARN) that uniquely identifies the index.
	IndexArn *string `type:"string"`

	// Represents the name of the local secondary index.
	IndexName *string `min:"3" type:"string"`

	// The total size of the specified index, in bytes. DynamoDB updates this value
	// approximately every six hours. Recent changes might not be reflected in this
	// value.
	IndexSizeBytes *int64 `type:"long"`

	// The number of items in the specified index. DynamoDB updates this value approximately
	// every six hours. Recent changes might not be reflected in this value.
	ItemCount *int64 `type:"long"`

	// The complete key schema for the local secondary index, consisting of one
	// or more pairs of attribute names and key types:
	//
	//    HASH - partition key
	//
	//    RANGE - sort key
	//
	//    The partition key of an item is also known as its hash attribute. The
	// term "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	KeySchema []*KeySchemaElement `min:"1" type:"list"`

	// Represents attributes that are copied (projected) from the table into an
	// index. These are in addition to the primary key attributes and index key
	// attributes, which are automatically projected.
	Projection *Projection `type:"structure"`
}

// String returns the string representation
func (s LocalSecondaryIndexDescription) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s LocalSecondaryIndexDescription) GoString() string {
	return s.String()
}

// Represents attributes that are copied (projected) from the table into an
// index. These are in addition to the primary key attributes and index key
// attributes, which are automatically projected.
type Projection struct {
	_ struct{} `type:"structure"`

	// Represents the non-key attribute names which will be projected into the index.
	//
	// For local secondary indexes, the total count of NonKeyAttributes summed
	// across all of the local secondary indexes, must not exceed 20. If you project
	// the same attribute into two different indexes, this counts as two distinct
	// attributes when determining the total.
	NonKeyAttributes []*string `min:"1" type:"list"`

	// The set of attributes that are projected into the index:
	//
	//    KEYS_ONLY - Only the index and primary keys are projected into the index.
	//
	//    INCLUDE - Only the specified table attributes are projected into the
	// index. The list of projected attributes are in NonKeyAttributes.
	//
	//    ALL - All of the table attributes are projected into the index.
	ProjectionType *string `type:"string" enum:"ProjectionType"`
}

// String returns the string representation
func (s Projection) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s Projection) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *Projection) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "Projection"}
	if s.NonKeyAttributes != nil && len(s.NonKeyAttributes) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("NonKeyAttributes", 1))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the provisioned throughput settings for a specified table or index.
// The settings can be modified using the UpdateTable operation.
//
// For current minimum and maximum provisioned throughput values, see Limits
// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
// in the Amazon DynamoDB Developer Guide.
type ProvisionedThroughput struct {
	_ struct{} `type:"structure"`

	// The maximum number of strongly consistent reads consumed per second before
	// DynamoDB returns a ThrottlingException. For more information, see Specifying
	// Read and Write Requirements (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithTables.html#ProvisionedThroughput)
	// in the Amazon DynamoDB Developer Guide.
	ReadCapacityUnits *int64 `min:"1" type:"long" required:"true"`

	// The maximum number of writes consumed per second before DynamoDB returns
	// a ThrottlingException. For more information, see Specifying Read and Write
	// Requirements (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithTables.html#ProvisionedThroughput)
	// in the Amazon DynamoDB Developer Guide.
	WriteCapacityUnits *int64 `min:"1" type:"long" required:"true"`
}

// String returns the string representation
func (s ProvisionedThroughput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s ProvisionedThroughput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *ProvisionedThroughput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "ProvisionedThroughput"}
	if s.ReadCapacityUnits == nil {
		invalidParams.Add(request.NewErrParamRequired("ReadCapacityUnits"))
	}
	if s.ReadCapacityUnits != nil && *s.ReadCapacityUnits < 1 {
		invalidParams.Add(request.NewErrParamMinValue("ReadCapacityUnits", 1))
	}
	if s.WriteCapacityUnits == nil {
		invalidParams.Add(request.NewErrParamRequired("WriteCapacityUnits"))
	}
	if s.WriteCapacityUnits != nil && *s.WriteCapacityUnits < 1 {
		invalidParams.Add(request.NewErrParamMinValue("WriteCapacityUnits", 1))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the provisioned throughput settings for the table, consisting
// of read and write capacity units, along with data about increases and decreases.
type ProvisionedThroughputDescription struct {
	_ struct{} `type:"structure"`

	// The date and time of the last provisioned throughput decrease for this table.
	LastDecreaseDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The date and time of the last provisioned throughput increase for this table.
	LastIncreaseDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The number of provisioned throughput decreases for this table during this
	// UTC calendar day. For current maximums on provisioned throughput decreases,
	// see Limits (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	NumberOfDecreasesToday *int64 `min:"1" type:"long"`

	// The maximum number of strongly consistent reads consumed per second before
	// DynamoDB returns a ThrottlingException. Eventually consistent reads require
	// less effort than strongly consistent reads, so a setting of 50 ReadCapacityUnits
	// per second provides 100 eventually consistent ReadCapacityUnits per second.
	ReadCapacityUnits *int64 `min:"1" type:"long"`

	// The maximum number of writes consumed per second before DynamoDB returns
	// a ThrottlingException.
	WriteCapacityUnits *int64 `min:"1" type:"long"`
}

// String returns the string representation
func (s ProvisionedThroughputDescription) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s ProvisionedThroughputDescription) GoString() string {
	return s.String()
}

// Represents the input of a PutItem operation.
type PutItemInput struct {
	_ struct{} `type:"structure"`

	// A condition that must be satisfied in order for a conditional PutItem operation
	// to succeed.
	//
	// An expression can contain any of the following:
	//
	//   Functions: attribute_exists | attribute_not_exists | attribute_type |
	// contains | begins_with | size
	//
	// These function names are case-sensitive.
	//
	//   Comparison operators:  = | &#x3C;&#x3E; | &#x3C; | &#x3E; | &#x3C;= |
	// &#x3E;= | BETWEEN | IN
	//
	//    Logical operators: AND | OR | NOT
	//
	//   For more information on condition expressions, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//   ConditionExpression replaces the legacy ConditionalOperator and Expected
	// parameters.
	ConditionExpression *string `type:"string"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use ConditionExpression instead. Do not combine legacy parameters
	// and expression parameters in a single API call; otherwise, DynamoDB will
	// return a ValidationException exception.
	//
	//  A logical operator to apply to the conditions in the Expected map:
	//
	//    AND - If all of the conditions evaluate to true, then the entire map
	// evaluates to true.
	//
	//    OR - If at least one of the conditions evaluate to true, then the entire
	// map evaluates to true.
	//
	//   If you omit ConditionalOperator, then AND is the default.
	//
	// The operation will succeed only if the entire map evaluates to true.
	//
	//  This parameter does not support attributes of type List or Map.
	ConditionalOperator *string `type:"string" enum:"ConditionalOperator"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use ConditionExpression instead. Do not combine legacy parameters
	// and expression parameters in a single API call; otherwise, DynamoDB will
	// return a ValidationException exception.
	//
	//  A map of attribute/condition pairs. Expected provides a conditional block
	// for the PutItem operation.
	//
	//  This parameter does not support attributes of type List or Map.
	//
	//  Each element of Expected consists of an attribute name, a comparison operator,
	// and one or more values. DynamoDB compares the attribute with the value(s)
	// you supplied, using the comparison operator. For each Expected element, the
	// result of the evaluation is either true or false.
	//
	// If you specify more than one element in the Expected map, then by default
	// all of the conditions must evaluate to true. In other words, the conditions
	// are ANDed together. (You can use the ConditionalOperator parameter to OR
	// the conditions instead. If you do this, then at least one of the conditions
	// must evaluate to true, rather than all of them.)
	//
	// If the Expected map evaluates to true, then the conditional operation succeeds;
	// otherwise, it fails.
	//
	//  Expected contains the following:
	//
	//    AttributeValueList - One or more values to evaluate against the supplied
	// attribute. The number of values in the list depends on the ComparisonOperator
	// being used.
	//
	// For type Number, value comparisons are numeric.
	//
	// String value comparisons for greater than, equals, or less than are based
	// on ASCII character code values. For example, a is greater than A, and a is
	// greater than B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
	// (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters).
	//
	// For type Binary, DynamoDB treats each byte of the binary data as unsigned
	// when it compares binary values.
	//
	//    ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList.
	// When performing the comparison, DynamoDB uses strongly consistent reads.
	//
	// The following comparison operators are available:
	//
	//  EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS
	// | BEGINS_WITH | IN | BETWEEN
	//
	// The following are descriptions of each comparison operator.
	//
	//    EQ : Equal. EQ is supported for all datatypes, including lists and maps.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, Binary, String Set, Number Set, or Binary Set. If an item
	// contains an AttributeValue element of a different type than the one provided
	// in the request, the value does not match. For example, {"S":"6"} does not
	// equal {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//     NE : Not equal. NE is supported for all datatypes, including lists and
	// maps.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, Binary, String Set, Number Set, or Binary Set. If an item contains
	// an AttributeValue of a different type than the one provided in the request,
	// the value does not match. For example, {"S":"6"} does not equal {"N":"6"}.
	// Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//     LE : Less than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     LT : Less than.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GE : Greater than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GT : Greater than.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes,
	// including lists and maps.
	//
	//  This operator tests for the existence of an attribute, not its data type.
	// If the data type of attribute "a" is null, and you evaluate it using NOT_NULL,
	// the result is a Boolean true. This result is because the attribute "a" exists;
	// its data type is not relevant to the NOT_NULL comparison operator.
	//
	//     NULL : The attribute does not exist. NULL is supported for all datatypes,
	// including lists and maps.
	//
	//  This operator tests for the nonexistence of an attribute, not its data
	// type. If the data type of attribute "a" is null, and you evaluate it using
	// NULL, the result is a Boolean false. This is because the attribute "a" exists;
	// its data type is not relevant to the NULL comparison operator.
	//
	//     CONTAINS : Checks for a subsequence, or value in a set.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If the target attribute of the
	// comparison is of type String, then the operator checks for a substring match.
	// If the target attribute of the comparison is of type Binary, then the operator
	// looks for a subsequence of the target that matches the input. If the target
	// attribute of the comparison is a set ("SS", "NS", or "BS"), then the operator
	// evaluates to true if it finds an exact match with any member of the set.
	//
	// CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a" can
	// be a list; however, "b" cannot be a set, a map, or a list.
	//
	//    NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value
	// in a set.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If the target attribute of the
	// comparison is a String, then the operator checks for the absence of a substring
	// match. If the target attribute of the comparison is Binary, then the operator
	// checks for the absence of a subsequence of the target that matches the input.
	// If the target attribute of the comparison is a set ("SS", "NS", or "BS"),
	// then the operator evaluates to true if it does not find an exact match with
	// any member of the set.
	//
	// NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b",
	// "a" can be a list; however, "b" cannot be a set, a map, or a list.
	//
	//    BEGINS_WITH : Checks for a prefix.
	//
	//  AttributeValueList can contain only one AttributeValue of type String or
	// Binary (not a Number or a set type). The target attribute of the comparison
	// must be of type String or Binary (not a Number or a set type).
	//
	//     IN : Checks for matching elements within two sets.
	//
	//  AttributeValueList can contain one or more AttributeValue elements of type
	// String, Number, or Binary (not a set type). These attributes are compared
	// against an existing set type attribute of an item. If any elements of the
	// input set are present in the item attribute, the expression evaluates to
	// true.
	//
	//    BETWEEN : Greater than or equal to the first value, and less than or
	// equal to the second value.
	//
	//  AttributeValueList must contain two AttributeValue elements of the same
	// type, either String, Number, or Binary (not a set type). A target attribute
	// matches if the target value is greater than, or equal to, the first element
	// and less than, or equal to, the second element. If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not compare to {"N":"6"}. Also,
	// {"N":"6"} does not compare to {"NS":["6", "2", "1"]}
	//
	//     For usage examples of AttributeValueList and ComparisonOperator, see
	// Legacy Conditional Parameters (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	// For backward compatibility with previous DynamoDB releases, the following
	// parameters can be used instead of AttributeValueList and ComparisonOperator:
	//
	//    Value - A value for DynamoDB to compare with an attribute.
	//
	//    Exists - A Boolean value that causes DynamoDB to evaluate the value before
	// attempting the conditional operation:
	//
	//   If Exists is true, DynamoDB will check to see if that attribute value
	// already exists in the table. If it is found, then the condition evaluates
	// to true; otherwise the condition evaluate to false.
	//
	//   If Exists is false, DynamoDB assumes that the attribute value does not
	// exist in the table. If in fact the value does not exist, then the assumption
	// is valid and the condition evaluates to true. If the value is found, despite
	// the assumption that it does not exist, the condition evaluates to false.
	//
	//   Note that the default value for Exists is true.
	//
	//   The Value and Exists parameters are incompatible with AttributeValueList
	// and ComparisonOperator. Note that if you use both sets of parameters at once,
	// DynamoDB will return a ValidationException exception.
	Expected map[string]*ExpectedAttributeValue `type:"map"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//   To access an attribute whose name conflicts with a DynamoDB reserved word.
	//
	//   To create a placeholder for repeating occurrences of an attribute name
	// in an expression.
	//
	//   To prevent special characters in an attribute name from being misinterpreted
	// in an expression.
	//
	//   Use the # character in an expression to dereference an attribute name.
	// For example, consider the following attribute name:
	//
	//    Percentile
	//
	//   The name of this attribute conflicts with a reserved word, so it cannot
	// be used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    {"#P":"Percentile"}
	//
	//   You could then use this substitution in an expression, as in this example:
	//
	//    #P = :val
	//
	//    Tokens that begin with the : character are expression attribute values,
	// which are placeholders for the actual value at runtime.
	//
	//  For more information on expression attribute names, see Accessing Item
	// Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// One or more values that can be substituted in an expression.
	//
	// Use the : (colon) character in an expression to dereference an attribute
	// value. For example, suppose that you wanted to check whether the value of
	// the ProductStatus attribute was one of the following:
	//
	//  Available | Backordered | Discontinued
	//
	// You would first need to specify ExpressionAttributeValues as follows:
	//
	//  { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"}
	// }
	//
	// You could then use these values in an expression, such as this:
	//
	//  ProductStatus IN (:avail, :back, :disc)
	//
	// For more information on expression attribute values, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeValues map[string]*AttributeValue `type:"map"`

	// A map of attribute name/value pairs, one for each attribute. Only the primary
	// key attributes are required; you can optionally provide other attribute name-value
	// pairs for the item.
	//
	// You must provide all of the attributes for the primary key. For example,
	// with a simple primary key, you only need to provide a value for the partition
	// key. For a composite primary key, you must provide both values for both the
	// partition key and the sort key.
	//
	// If you specify any attributes that are part of an index key, then the data
	// types for those attributes must match those of the schema in the table's
	// attribute definition.
	//
	// For more information about primary keys, see Primary Key (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DataModel.html#DataModelPrimaryKey)
	// in the Amazon DynamoDB Developer Guide.
	//
	// Each element in the Item map is an AttributeValue object.
	Item map[string]*AttributeValue `type:"map" required:"true"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    INDEXES - The response includes the aggregate ConsumedCapacity for the
	// operation, together with ConsumedCapacity for each table and secondary index
	// that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	// any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity
	// information for table(s).
	//
	//    TOTAL - The response includes only the aggregate ConsumedCapacity for
	// the operation.
	//
	//    NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// Determines whether item collection metrics are returned. If set to SIZE,
	// the response includes statistics about item collections, if any, that were
	// modified during the operation are returned in the response. If set to NONE
	// (the default), no statistics are returned.
	ReturnItemCollectionMetrics *string `type:"string" enum:"ReturnItemCollectionMetrics"`

	// Use ReturnValues if you want to get the item attributes as they appeared
	// before they were updated with the PutItem request. For PutItem, the valid
	// values are:
	//
	//    NONE - If ReturnValues is not specified, or if its value is NONE, then
	// nothing is returned. (This setting is the default for ReturnValues.)
	//
	//    ALL_OLD - If PutItem overwrote an attribute name-value pair, then the
	// content of the old item is returned.
	//
	//    The ReturnValues parameter is used by several DynamoDB operations; however,
	// PutItem does not recognize any values other than NONE or ALL_OLD.
	ReturnValues *string `type:"string" enum:"ReturnValue"`

	// The name of the table to contain the item.
	TableName *string `min:"3" type:"string" required:"true"`
}

// String returns the string representation
func (s PutItemInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s PutItemInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *PutItemInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "PutItemInput"}
	if s.Item == nil {
		invalidParams.Add(request.NewErrParamRequired("Item"))
	}
	if s.TableName == nil {
		invalidParams.Add(request.NewErrParamRequired("TableName"))
	}
	if s.TableName != nil && len(*s.TableName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("TableName", 3))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of a PutItem operation.
type PutItemOutput struct {
	_ struct{} `type:"structure"`

	// The attribute values as they appeared before the PutItem operation, but only
	// if ReturnValues is specified as ALL_OLD in the request. Each element consists
	// of an attribute name and an attribute value.
	Attributes map[string]*AttributeValue `type:"map"`

	// The capacity units consumed by an operation. The data returned includes the
	// total provisioned throughput consumed, along with statistics for the table
	// and any indexes involved in the operation. ConsumedCapacity is only returned
	// if the request asked for it. For more information, see Provisioned Throughput
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// Information about item collections, if any, that were affected by the operation.
	// ItemCollectionMetrics is only returned if the request asked for it. If the
	// table does not have any local secondary indexes, this information is not
	// returned in the response.
	//
	// Each ItemCollectionMetrics element consists of:
	//
	//    ItemCollectionKey - The partition key value of the item collection. This
	// is the same as the partition key value of the item itself.
	//
	//    SizeEstimateRange - An estimate of item collection size, in gigabytes.
	// This value is a two-element array containing a lower bound and an upper bound
	// for the estimate. The estimate includes the size of all the items in the
	// table, plus the size of all attributes projected into all of the local secondary
	// indexes on that table. Use this estimate to measure whether a local secondary
	// index is approaching its size limit.
	//
	// The estimate is subject to change over time; therefore, do not rely on the
	// precision or accuracy of the estimate.
	ItemCollectionMetrics *ItemCollectionMetrics `type:"structure"`
}

// String returns the string representation
func (s PutItemOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s PutItemOutput) GoString() string {
	return s.String()
}

// Represents a request to perform a PutItem operation on an item.
type PutRequest struct {
	_ struct{} `type:"structure"`

	// A map of attribute name to attribute values, representing the primary key
	// of an item to be processed by PutItem. All of the table's primary key attributes
	// must be specified, and their data types must match those of the table's key
	// schema. If any attributes are present in the item which are part of an index
	// key schema for the table, their types must match the index key schema.
	Item map[string]*AttributeValue `type:"map" required:"true"`
}

// String returns the string representation
func (s PutRequest) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s PutRequest) GoString() string {
	return s.String()
}

// Represents the input of a Query operation.
type QueryInput struct {
	_ struct{} `type:"structure"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use ProjectionExpression instead. Do not combine legacy parameters
	// and expression parameters in a single API call; otherwise, DynamoDB will
	// return a ValidationException exception.
	//
	// This parameter allows you to retrieve attributes of type List or Map; however,
	// it cannot retrieve individual elements within a List or a Map.
	//
	//  The names of one or more attributes to retrieve. If no attribute names
	// are provided, then all attributes will be returned. If any of the requested
	// attributes are not found, they will not appear in the result.
	//
	// Note that AttributesToGet has no effect on provisioned throughput consumption.
	// DynamoDB determines capacity units consumed based on item size, not on the
	// amount of data that is returned to an application.
	//
	// You cannot use both AttributesToGet and Select together in a Query request,
	// unless the value for Select is SPECIFIC_ATTRIBUTES. (This usage is equivalent
	// to specifying AttributesToGet without any value for Select.)
	//
	// If you query a local secondary index and request only attributes that are
	// projected into that index, the operation will read only the index and not
	// the table. If any of the requested attributes are not projected into the
	// local secondary index, DynamoDB will fetch each of these attributes from
	// the parent table. This extra fetching incurs additional throughput cost and
	// latency.
	//
	// If you query a global secondary index, you can only request attributes that
	// are projected into the index. Global secondary index queries cannot fetch
	// attributes from the parent table.
	AttributesToGet []*string `min:"1" type:"list"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use FilterExpression instead. Do not combine legacy parameters and
	// expression parameters in a single API call; otherwise, DynamoDB will return
	// a ValidationException exception.
	//
	//  A logical operator to apply to the conditions in a QueryFilter map:
	//
	//    AND - If all of the conditions evaluate to true, then the entire map
	// evaluates to true.
	//
	//    OR - If at least one of the conditions evaluate to true, then the entire
	// map evaluates to true.
	//
	//   If you omit ConditionalOperator, then AND is the default.
	//
	// The operation will succeed only if the entire map evaluates to true.
	//
	//  This parameter does not support attributes of type List or Map.
	ConditionalOperator *string `type:"string" enum:"ConditionalOperator"`

	// Determines the read consistency model: If set to true, then the operation
	// uses strongly consistent reads; otherwise, the operation uses eventually
	// consistent reads.
	//
	// Strongly consistent reads are not supported on global secondary indexes.
	// If you query a global secondary index with ConsistentRead set to true, you
	// will receive a ValidationException.
	ConsistentRead *bool `type:"boolean"`

	// The primary key of the first item that this operation will evaluate. Use
	// the value that was returned for LastEvaluatedKey in the previous operation.
	//
	// The data type for ExclusiveStartKey must be String, Number or Binary. No
	// set data types are allowed.
	ExclusiveStartKey map[string]*AttributeValue `type:"map"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//   To access an attribute whose name conflicts with a DynamoDB reserved word.
	//
	//   To create a placeholder for repeating occurrences of an attribute name
	// in an expression.
	//
	//   To prevent special characters in an attribute name from being misinterpreted
	// in an expression.
	//
	//   Use the # character in an expression to dereference an attribute name.
	// For example, consider the following attribute name:
	//
	//    Percentile
	//
	//   The name of this attribute conflicts with a reserved word, so it cannot
	// be used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    {"#P":"Percentile"}
	//
	//   You could then use this substitution in an expression, as in this example:
	//
	//    #P = :val
	//
	//    Tokens that begin with the : character are expression attribute values,
	// which are placeholders for the actual value at runtime.
	//
	//  For more information on expression attribute names, see Accessing Item
	// Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// One or more values that can be substituted in an expression.
	//
	// Use the : (colon) character in an expression to dereference an attribute
	// value. For example, suppose that you wanted to check whether the value of
	// the ProductStatus attribute was one of the following:
	//
	//  Available | Backordered | Discontinued
	//
	// You would first need to specify ExpressionAttributeValues as follows:
	//
	//  { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"}
	// }
	//
	// You could then use these values in an expression, such as this:
	//
	//  ProductStatus IN (:avail, :back, :disc)
	//
	// For more information on expression attribute values, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeValues map[string]*AttributeValue `type:"map"`

	// A string that contains conditions that DynamoDB applies after the Query operation,
	// but before the data is returned to you. Items that do not satisfy the FilterExpression
	// criteria are not returned.
	//
	//  A FilterExpression is applied after the items have already been read; the
	// process of filtering does not consume any additional read capacity units.
	//
	//  For more information, see Filter Expressions (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html#FilteringResults)
	// in the Amazon DynamoDB Developer Guide.
	//
	//   FilterExpression replaces the legacy QueryFilter and ConditionalOperator
	// parameters.
	FilterExpression *string `type:"string"`

	// The name of an index to query. This index can be any local secondary index
	// or global secondary index on the table. Note that if you use the IndexName
	// parameter, you must also provide TableName.
	IndexName *string `min:"3" type:"string"`

	// The condition that specifies the key value(s) for items to be retrieved by
	// the Query action.
	//
	// The condition must perform an equality test on a single partition key value.
	// The condition can also perform one of several comparison tests on a single
	// sort key value. Query can use KeyConditionExpression to retrieve one item
	// with a given partition key value and sort key value, or several items that
	// have the same partition key value but different sort key values.
	//
	// The partition key equality test is required, and must be specified in the
	// following format:
	//
	//  partitionKeyName = :partitionkeyval
	//
	// If you also want to provide a condition for the sort key, it must be combined
	// using AND with the condition for the sort key. Following is an example, using
	// the = comparison operator for the sort key:
	//
	//  partitionKeyName = :partitionkeyval AND sortKeyName = :sortkeyval
	//
	// Valid comparisons for the sort key condition are as follows:
	//
	//    sortKeyName = :sortkeyval - true if the sort key value is equal to :sortkeyval.
	//
	//    sortKeyName < :sortkeyval - true if the sort key value is less than :sortkeyval.
	//
	//    sortKeyName <= :sortkeyval - true if the sort key value is less than
	// or equal to :sortkeyval.
	//
	//    sortKeyName > :sortkeyval - true if the sort key value is greater than
	// :sortkeyval.
	//
	//    sortKeyName >=  :sortkeyval - true if the sort key value is greater than
	// or equal to :sortkeyval.
	//
	//    sortKeyName BETWEEN :sortkeyval1 AND :sortkeyval2 - true if the sort
	// key value is greater than or equal to :sortkeyval1, and less than or equal
	// to :sortkeyval2.
	//
	//    begins_with ( sortKeyName, :sortkeyval ) - true if the sort key value
	// begins with a particular operand. (You cannot use this function with a sort
	// key that is of type Number.) Note that the function name begins_with is case-sensitive.
	//
	//   Use the ExpressionAttributeValues parameter to replace tokens such as
	// :partitionval and :sortval with actual values at runtime.
	//
	// You can optionally use the ExpressionAttributeNames parameter to replace
	// the names of the partition key and sort key with placeholder tokens. This
	// option might be necessary if an attribute name conflicts with a DynamoDB
	// reserved word. For example, the following KeyConditionExpression parameter
	// causes an error because Size is a reserved word:
	//
	//   Size = :myval
	//
	//   To work around this, define a placeholder (such a #S) to represent the
	// attribute name Size. KeyConditionExpression then is as follows:
	//
	//   #S = :myval
	//
	//   For a list of reserved words, see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	// For more information on ExpressionAttributeNames and ExpressionAttributeValues,
	// see Using Placeholders for Attribute Names and Values (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ExpressionPlaceholders.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//   KeyConditionExpression replaces the legacy KeyConditions parameter.
	KeyConditionExpression *string `type:"string"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use KeyConditionExpression instead. Do not combine legacy parameters
	// and expression parameters in a single API call; otherwise, DynamoDB will
	// return a ValidationException exception.
	//
	//  The selection criteria for the query. For a query on a table, you can have
	// conditions only on the table primary key attributes. You must provide the
	// partition key name and value as an EQ condition. You can optionally provide
	// a second condition, referring to the sort key.
	//
	//  If you don't provide a sort key condition, all of the items that match
	// the partition key will be retrieved. If a FilterExpression or QueryFilter
	// is present, it will be applied after the items are retrieved.
	//
	//  For a query on an index, you can have conditions only on the index key
	// attributes. You must provide the index partition key name and value as an
	// EQ condition. You can optionally provide a second condition, referring to
	// the index sort key.
	//
	// Each KeyConditions element consists of an attribute name to compare, along
	// with the following:
	//
	//    AttributeValueList - One or more values to evaluate against the supplied
	// attribute. The number of values in the list depends on the ComparisonOperator
	// being used.
	//
	// For type Number, value comparisons are numeric.
	//
	// String value comparisons for greater than, equals, or less than are based
	// on ASCII character code values. For example, a is greater than A, and a is
	// greater than B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
	// (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters).
	//
	// For Binary, DynamoDB treats each byte of the binary data as unsigned when
	// it compares binary values.
	//
	//    ComparisonOperator - A comparator for evaluating attributes, for example,
	// equals, greater than, less than, and so on.
	//
	// For KeyConditions, only the following comparison operators are supported:
	//
	//  EQ | LE | LT | GE | GT | BEGINS_WITH | BETWEEN
	//
	// The following are descriptions of these comparison operators.
	//
	//    EQ : Equal.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one specified in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not equal {"NS":["6", "2", "1"]}.
	//
	//     LE : Less than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     LT : Less than.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GE : Greater than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GT : Greater than.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     BEGINS_WITH : Checks for a prefix.
	//
	//  AttributeValueList can contain only one AttributeValue of type String or
	// Binary (not a Number or a set type). The target attribute of the comparison
	// must be of type String or Binary (not a Number or a set type).
	//
	//     BETWEEN : Greater than or equal to the first value, and less than or
	// equal to the second value.
	//
	//  AttributeValueList must contain two AttributeValue elements of the same
	// type, either String, Number, or Binary (not a set type). A target attribute
	// matches if the target value is greater than, or equal to, the first element
	// and less than, or equal to, the second element. If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not compare to {"N":"6"}. Also,
	// {"N":"6"} does not compare to {"NS":["6", "2", "1"]}
	//
	//     For usage examples of AttributeValueList and ComparisonOperator, see
	// Legacy Conditional Parameters (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.html)
	// in the Amazon DynamoDB Developer Guide.
	KeyConditions map[string]*Condition `type:"map"`

	// The maximum number of items to evaluate (not necessarily the number of matching
	// items). If DynamoDB processes the number of items up to the limit while processing
	// the results, it stops the operation and returns the matching values up to
	// that point, and a key in LastEvaluatedKey to apply in a subsequent operation,
	// so that you can pick up where you left off. Also, if the processed data set
	// size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation
	// and returns the matching values up to the limit, and a key in LastEvaluatedKey
	// to apply in a subsequent operation to continue the operation. For more information,
	// see Query and Scan (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html)
	// in the Amazon DynamoDB Developer Guide.
	Limit *int64 `min:"1" type:"integer"`

	// A string that identifies one or more attributes to retrieve from the table.
	// These attributes can include scalars, sets, or elements of a JSON document.
	// The attributes in the expression must be separated by commas.
	//
	// If no attribute names are specified, then all attributes will be returned.
	// If any of the requested attributes are not found, they will not appear in
	// the result.
	//
	// For more information, see Accessing Item Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//   ProjectionExpression replaces the legacy AttributesToGet parameter.
	ProjectionExpression *string `type:"string"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use FilterExpression instead. Do not combine legacy parameters and
	// expression parameters in a single API call; otherwise, DynamoDB will return
	// a ValidationException exception.
	//
	//  A condition that evaluates the query results after the items are read and
	// returns only the desired values.
	//
	// This parameter does not support attributes of type List or Map.
	//
	//  A QueryFilter is applied after the items have already been read; the process
	// of filtering does not consume any additional read capacity units.
	//
	//  If you provide more than one condition in the QueryFilter map, then by
	// default all of the conditions must evaluate to true. In other words, the
	// conditions are ANDed together. (You can use the ConditionalOperator parameter
	// to OR the conditions instead. If you do this, then at least one of the conditions
	// must evaluate to true, rather than all of them.)
	//
	// Note that QueryFilter does not allow key attributes. You cannot define a
	// filter condition on a partition key or a sort key.
	//
	// Each QueryFilter element consists of an attribute name to compare, along
	// with the following:
	//
	//    AttributeValueList - One or more values to evaluate against the supplied
	// attribute. The number of values in the list depends on the operator specified
	// in ComparisonOperator.
	//
	// For type Number, value comparisons are numeric.
	//
	// String value comparisons for greater than, equals, or less than are based
	// on ASCII character code values. For example, a is greater than A, and a is
	// greater than B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
	// (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters).
	//
	// For type Binary, DynamoDB treats each byte of the binary data as unsigned
	// when it compares binary values.
	//
	// For information on specifying data types in JSON, see JSON Data Format (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DataFormat.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//    ComparisonOperator - A comparator for evaluating attributes. For example,
	// equals, greater than, less than, etc.
	//
	// The following comparison operators are available:
	//
	//  EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS
	// | BEGINS_WITH | IN | BETWEEN
	//
	// For complete descriptions of all comparison operators, see the Condition
	// (http://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_Condition.html)
	// data type.
	QueryFilter map[string]*Condition `type:"map"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    INDEXES - The response includes the aggregate ConsumedCapacity for the
	// operation, together with ConsumedCapacity for each table and secondary index
	// that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	// any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity
	// information for table(s).
	//
	//    TOTAL - The response includes only the aggregate ConsumedCapacity for
	// the operation.
	//
	//    NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// Specifies the order for index traversal: If true (default), the traversal
	// is performed in ascending order; if false, the traversal is performed in
	// descending order.
	//
	// Items with the same partition key value are stored in sorted order by sort
	// key. If the sort key data type is Number, the results are stored in numeric
	// order. For type String, the results are stored in order of ASCII character
	// code values. For type Binary, DynamoDB treats each byte of the binary data
	// as unsigned.
	//
	// If ScanIndexForward is true, DynamoDB returns the results in the order in
	// which they are stored (by sort key value). This is the default behavior.
	// If ScanIndexForward is false, DynamoDB reads the results in reverse order
	// by sort key value, and then returns the results to the client.
	ScanIndexForward *bool `type:"boolean"`

	// The attributes to be returned in the result. You can retrieve all item attributes,
	// specific item attributes, the count of matching items, or in the case of
	// an index, some or all of the attributes projected into the index.
	//
	//    ALL_ATTRIBUTES - Returns all of the item attributes from the specified
	// table or index. If you query a local secondary index, then for each matching
	// item in the index DynamoDB will fetch the entire item from the parent table.
	// If the index is configured to project all item attributes, then all of the
	// data can be obtained from the local secondary index, and no fetching is required.
	//
	//    ALL_PROJECTED_ATTRIBUTES - Allowed only when querying an index. Retrieves
	// all attributes that have been projected into the index. If the index is configured
	// to project all attributes, this return value is equivalent to specifying
	// ALL_ATTRIBUTES.
	//
	//    COUNT - Returns the number of matching items, rather than the matching
	// items themselves.
	//
	//    SPECIFIC_ATTRIBUTES - Returns only the attributes listed in AttributesToGet.
	// This return value is equivalent to specifying AttributesToGet without specifying
	// any value for Select.
	//
	// If you query a local secondary index and request only attributes that are
	// projected into that index, the operation will read only the index and not
	// the table. If any of the requested attributes are not projected into the
	// local secondary index, DynamoDB will fetch each of these attributes from
	// the parent table. This extra fetching incurs additional throughput cost and
	// latency.
	//
	// If you query a global secondary index, you can only request attributes that
	// are projected into the index. Global secondary index queries cannot fetch
	// attributes from the parent table.
	//
	//   If neither Select nor AttributesToGet are specified, DynamoDB defaults
	// to ALL_ATTRIBUTES when accessing a table, and ALL_PROJECTED_ATTRIBUTES when
	// accessing an index. You cannot use both Select and AttributesToGet together
	// in a single request, unless the value for Select is SPECIFIC_ATTRIBUTES.
	// (This usage is equivalent to specifying AttributesToGet without any value
	// for Select.)
	//
	//  If you use the ProjectionExpression parameter, then the value for Select
	// can only be SPECIFIC_ATTRIBUTES. Any other value for Select will return an
	// error.
	Select *string `type:"string" enum:"Select"`

	// The name of the table containing the requested items.
	TableName *string `min:"3" type:"string" required:"true"`
}

// String returns the string representation
func (s QueryInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s QueryInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *QueryInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "QueryInput"}
	if s.AttributesToGet != nil && len(s.AttributesToGet) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("AttributesToGet", 1))
	}
	if s.IndexName != nil && len(*s.IndexName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("IndexName", 3))
	}
	if s.Limit != nil && *s.Limit < 1 {
		invalidParams.Add(request.NewErrParamMinValue("Limit", 1))
	}
	if s.TableName == nil {
		invalidParams.Add(request.NewErrParamRequired("TableName"))
	}
	if s.TableName != nil && len(*s.TableName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("TableName", 3))
	}
	if s.KeyConditions != nil {
		for i, v := range s.KeyConditions {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "KeyConditions", i), err.(request.ErrInvalidParams))
			}
		}
	}
	if s.QueryFilter != nil {
		for i, v := range s.QueryFilter {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "QueryFilter", i), err.(request.ErrInvalidParams))
			}
		}
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of a Query operation.
type QueryOutput struct {
	_ struct{} `type:"structure"`

	// The capacity units consumed by an operation. The data returned includes the
	// total provisioned throughput consumed, along with statistics for the table
	// and any indexes involved in the operation. ConsumedCapacity is only returned
	// if the request asked for it. For more information, see Provisioned Throughput
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// The number of items in the response.
	//
	// If you used a QueryFilter in the request, then Count is the number of items
	// returned after the filter was applied, and ScannedCount is the number of
	// matching items before the filter was applied.
	//
	// If you did not use a filter in the request, then Count and ScannedCount
	// are the same.
	Count *int64 `type:"integer"`

	// An array of item attributes that match the query criteria. Each element in
	// this array consists of an attribute name and the value for that attribute.
	Items []map[string]*AttributeValue `type:"list"`

	// The primary key of the item where the operation stopped, inclusive of the
	// previous result set. Use this value to start a new operation, excluding this
	// value in the new request.
	//
	// If LastEvaluatedKey is empty, then the "last page" of results has been processed
	// and there is no more data to be retrieved.
	//
	// If LastEvaluatedKey is not empty, it does not necessarily mean that there
	// is more data in the result set. The only way to know when you have reached
	// the end of the result set is when LastEvaluatedKey is empty.
	LastEvaluatedKey map[string]*AttributeValue `type:"map"`

	// The number of items evaluated, before any QueryFilter is applied. A high
	// ScannedCount value with few, or no, Count results indicates an inefficient
	// Query operation. For more information, see Count and ScannedCount (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html#Count)
	// in the Amazon DynamoDB Developer Guide.
	//
	// If you did not use a filter in the request, then ScannedCount is the same
	// as Count.
	ScannedCount *int64 `type:"integer"`
}

// String returns the string representation
func (s QueryOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s QueryOutput) GoString() string {
	return s.String()
}

// Represents the input of a Scan operation.
type ScanInput struct {
	_ struct{} `type:"structure"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use ProjectionExpression instead. Do not combine legacy parameters
	// and expression parameters in a single API call; otherwise, DynamoDB will
	// return a ValidationException exception.
	//
	// This parameter allows you to retrieve attributes of type List or Map; however,
	// it cannot retrieve individual elements within a List or a Map.
	//
	//  The names of one or more attributes to retrieve. If no attribute names
	// are provided, then all attributes will be returned. If any of the requested
	// attributes are not found, they will not appear in the result.
	//
	// Note that AttributesToGet has no effect on provisioned throughput consumption.
	// DynamoDB determines capacity units consumed based on item size, not on the
	// amount of data that is returned to an application.
	AttributesToGet []*string `min:"1" type:"list"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use FilterExpression instead. Do not combine legacy parameters and
	// expression parameters in a single API call; otherwise, DynamoDB will return
	// a ValidationException exception.
	//
	//  A logical operator to apply to the conditions in a ScanFilter map:
	//
	//    AND - If all of the conditions evaluate to true, then the entire map
	// evaluates to true.
	//
	//    OR - If at least one of the conditions evaluate to true, then the entire
	// map evaluates to true.
	//
	//   If you omit ConditionalOperator, then AND is the default.
	//
	// The operation will succeed only if the entire map evaluates to true.
	//
	//  This parameter does not support attributes of type List or Map.
	ConditionalOperator *string `type:"string" enum:"ConditionalOperator"`

	// A Boolean value that determines the read consistency model during the scan:
	//
	//   If ConsistentRead is false, then the data returned from Scan might not
	// contain the results from other recently completed write operations (PutItem,
	// UpdateItem or DeleteItem).
	//
	//   If ConsistentRead is true, then all of the write operations that completed
	// before the Scan began are guaranteed to be contained in the Scan response.
	//
	//   The default setting for ConsistentRead is false.
	//
	// The ConsistentRead parameter is not supported on global secondary indexes.
	// If you scan a global secondary index with ConsistentRead set to true, you
	// will receive a ValidationException.
	ConsistentRead *bool `type:"boolean"`

	// The primary key of the first item that this operation will evaluate. Use
	// the value that was returned for LastEvaluatedKey in the previous operation.
	//
	// The data type for ExclusiveStartKey must be String, Number or Binary. No
	// set data types are allowed.
	//
	// In a parallel scan, a Scan request that includes ExclusiveStartKey must
	// specify the same segment whose previous Scan returned the corresponding value
	// of LastEvaluatedKey.
	ExclusiveStartKey map[string]*AttributeValue `type:"map"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//   To access an attribute whose name conflicts with a DynamoDB reserved word.
	//
	//   To create a placeholder for repeating occurrences of an attribute name
	// in an expression.
	//
	//   To prevent special characters in an attribute name from being misinterpreted
	// in an expression.
	//
	//   Use the # character in an expression to dereference an attribute name.
	// For example, consider the following attribute name:
	//
	//    Percentile
	//
	//   The name of this attribute conflicts with a reserved word, so it cannot
	// be used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    {"#P":"Percentile"}
	//
	//   You could then use this substitution in an expression, as in this example:
	//
	//    #P = :val
	//
	//    Tokens that begin with the : character are expression attribute values,
	// which are placeholders for the actual value at runtime.
	//
	//  For more information on expression attribute names, see Accessing Item
	// Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// One or more values that can be substituted in an expression.
	//
	// Use the : (colon) character in an expression to dereference an attribute
	// value. For example, suppose that you wanted to check whether the value of
	// the ProductStatus attribute was one of the following:
	//
	//  Available | Backordered | Discontinued
	//
	// You would first need to specify ExpressionAttributeValues as follows:
	//
	//  { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"}
	// }
	//
	// You could then use these values in an expression, such as this:
	//
	//  ProductStatus IN (:avail, :back, :disc)
	//
	// For more information on expression attribute values, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeValues map[string]*AttributeValue `type:"map"`

	// A string that contains conditions that DynamoDB applies after the Scan operation,
	// but before the data is returned to you. Items that do not satisfy the FilterExpression
	// criteria are not returned.
	//
	//  A FilterExpression is applied after the items have already been read; the
	// process of filtering does not consume any additional read capacity units.
	//
	//  For more information, see Filter Expressions (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html#FilteringResults)
	// in the Amazon DynamoDB Developer Guide.
	//
	//   FilterExpression replaces the legacy ScanFilter and ConditionalOperator
	// parameters.
	FilterExpression *string `type:"string"`

	// The name of a secondary index to scan. This index can be any local secondary
	// index or global secondary index. Note that if you use the IndexName parameter,
	// you must also provide TableName.
	IndexName *string `min:"3" type:"string"`

	// The maximum number of items to evaluate (not necessarily the number of matching
	// items). If DynamoDB processes the number of items up to the limit while processing
	// the results, it stops the operation and returns the matching values up to
	// that point, and a key in LastEvaluatedKey to apply in a subsequent operation,
	// so that you can pick up where you left off. Also, if the processed data set
	// size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation
	// and returns the matching values up to the limit, and a key in LastEvaluatedKey
	// to apply in a subsequent operation to continue the operation. For more information,
	// see Query and Scan (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html)
	// in the Amazon DynamoDB Developer Guide.
	Limit *int64 `min:"1" type:"integer"`

	// A string that identifies one or more attributes to retrieve from the specified
	// table or index. These attributes can include scalars, sets, or elements of
	// a JSON document. The attributes in the expression must be separated by commas.
	//
	// If no attribute names are specified, then all attributes will be returned.
	// If any of the requested attributes are not found, they will not appear in
	// the result.
	//
	// For more information, see Accessing Item Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//   ProjectionExpression replaces the legacy AttributesToGet parameter.
	ProjectionExpression *string `type:"string"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    INDEXES - The response includes the aggregate ConsumedCapacity for the
	// operation, together with ConsumedCapacity for each table and secondary index
	// that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	// any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity
	// information for table(s).
	//
	//    TOTAL - The response includes only the aggregate ConsumedCapacity for
	// the operation.
	//
	//    NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use FilterExpression instead. Do not combine legacy parameters and
	// expression parameters in a single API call; otherwise, DynamoDB will return
	// a ValidationException exception.
	//
	//  A condition that evaluates the scan results and returns only the desired
	// values.
	//
	//  This parameter does not support attributes of type List or Map.
	//
	//  If you specify more than one condition in the ScanFilter map, then by default
	// all of the conditions must evaluate to true. In other words, the conditions
	// are ANDed together. (You can use the ConditionalOperator parameter to OR
	// the conditions instead. If you do this, then at least one of the conditions
	// must evaluate to true, rather than all of them.)
	//
	// Each ScanFilter element consists of an attribute name to compare, along
	// with the following:
	//
	//    AttributeValueList - One or more values to evaluate against the supplied
	// attribute. The number of values in the list depends on the operator specified
	// in ComparisonOperator .
	//
	// For type Number, value comparisons are numeric.
	//
	// String value comparisons for greater than, equals, or less than are based
	// on ASCII character code values. For example, a is greater than A, and a is
	// greater than B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
	// (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters).
	//
	// For Binary, DynamoDB treats each byte of the binary data as unsigned when
	// it compares binary values.
	//
	// For information on specifying data types in JSON, see JSON Data Format (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DataFormat.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//    ComparisonOperator - A comparator for evaluating attributes. For example,
	// equals, greater than, less than, etc.
	//
	// The following comparison operators are available:
	//
	//  EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS
	// | BEGINS_WITH | IN | BETWEEN
	//
	// For complete descriptions of all comparison operators, see Condition (http://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_Condition.html).
	ScanFilter map[string]*Condition `type:"map"`

	// For a parallel Scan request, Segment identifies an individual segment to
	// be scanned by an application worker.
	//
	// Segment IDs are zero-based, so the first segment is always 0. For example,
	// if you want to use four application threads to scan a table or an index,
	// then the first thread specifies a Segment value of 0, the second thread specifies
	// 1, and so on.
	//
	// The value of LastEvaluatedKey returned from a parallel Scan request must
	// be used as ExclusiveStartKey with the same segment ID in a subsequent Scan
	// operation.
	//
	// The value for Segment must be greater than or equal to 0, and less than
	// the value provided for TotalSegments.
	//
	// If you provide Segment, you must also provide TotalSegments.
	Segment *int64 `type:"integer"`

	// The attributes to be returned in the result. You can retrieve all item attributes,
	// specific item attributes, or the count of matching items.
	//
	//    ALL_ATTRIBUTES - Returns all of the item attributes.
	//
	//    ALL_PROJECTED_ATTRIBUTES - Allowed only when querying an index. Retrieves
	// all attributes that have been projected into the index. If the index is configured
	// to project all attributes, this return value is equivalent to specifying
	// ALL_ATTRIBUTES.
	//
	//    COUNT - Returns the number of matching items, rather than the matching
	// items themselves.
	//
	//    SPECIFIC_ATTRIBUTES - Returns only the attributes listed in AttributesToGet.
	// This return value is equivalent to specifying AttributesToGet without specifying
	// any value for Select.
	//
	//   If neither Select nor AttributesToGet are specified, DynamoDB defaults
	// to ALL_ATTRIBUTES. You cannot use both AttributesToGet and Select together
	// in a single request, unless the value for Select is SPECIFIC_ATTRIBUTES.
	// (This usage is equivalent to specifying AttributesToGet without any value
	// for Select.)
	Select *string `type:"string" enum:"Select"`

	// The name of the table containing the requested items; or, if you provide
	// IndexName, the name of the table to which that index belongs.
	TableName *string `min:"3" type:"string" required:"true"`

	// For a parallel Scan request, TotalSegments represents the total number of
	// segments into which the Scan operation will be divided. The value of TotalSegments
	// corresponds to the number of application workers that will perform the parallel
	// scan. For example, if you want to use four application threads to scan a
	// table or an index, specify a TotalSegments value of 4.
	//
	// The value for TotalSegments must be greater than or equal to 1, and less
	// than or equal to 1000000. If you specify a TotalSegments value of 1, the
	// Scan operation will be sequential rather than parallel.
	//
	// If you specify TotalSegments, you must also specify Segment.
	TotalSegments *int64 `min:"1" type:"integer"`
}

// String returns the string representation
func (s ScanInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s ScanInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *ScanInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "ScanInput"}
	if s.AttributesToGet != nil && len(s.AttributesToGet) < 1 {
		invalidParams.Add(request.NewErrParamMinLen("AttributesToGet", 1))
	}
	if s.IndexName != nil && len(*s.IndexName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("IndexName", 3))
	}
	if s.Limit != nil && *s.Limit < 1 {
		invalidParams.Add(request.NewErrParamMinValue("Limit", 1))
	}
	if s.TableName == nil {
		invalidParams.Add(request.NewErrParamRequired("TableName"))
	}
	if s.TableName != nil && len(*s.TableName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("TableName", 3))
	}
	if s.TotalSegments != nil && *s.TotalSegments < 1 {
		invalidParams.Add(request.NewErrParamMinValue("TotalSegments", 1))
	}
	if s.ScanFilter != nil {
		for i, v := range s.ScanFilter {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "ScanFilter", i), err.(request.ErrInvalidParams))
			}
		}
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of a Scan operation.
type ScanOutput struct {
	_ struct{} `type:"structure"`

	// The capacity units consumed by an operation. The data returned includes the
	// total provisioned throughput consumed, along with statistics for the table
	// and any indexes involved in the operation. ConsumedCapacity is only returned
	// if the request asked for it. For more information, see Provisioned Throughput
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// The number of items in the response.
	//
	// If you set ScanFilter in the request, then Count is the number of items
	// returned after the filter was applied, and ScannedCount is the number of
	// matching items before the filter was applied.
	//
	// If you did not use a filter in the request, then Count is the same as ScannedCount.
	Count *int64 `type:"integer"`

	// An array of item attributes that match the scan criteria. Each element in
	// this array consists of an attribute name and the value for that attribute.
	Items []map[string]*AttributeValue `type:"list"`

	// The primary key of the item where the operation stopped, inclusive of the
	// previous result set. Use this value to start a new operation, excluding this
	// value in the new request.
	//
	// If LastEvaluatedKey is empty, then the "last page" of results has been processed
	// and there is no more data to be retrieved.
	//
	// If LastEvaluatedKey is not empty, it does not necessarily mean that there
	// is more data in the result set. The only way to know when you have reached
	// the end of the result set is when LastEvaluatedKey is empty.
	LastEvaluatedKey map[string]*AttributeValue `type:"map"`

	// The number of items evaluated, before any ScanFilter is applied. A high ScannedCount
	// value with few, or no, Count results indicates an inefficient Scan operation.
	// For more information, see Count and ScannedCount (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html#Count)
	// in the Amazon DynamoDB Developer Guide.
	//
	// If you did not use a filter in the request, then ScannedCount is the same
	// as Count.
	ScannedCount *int64 `type:"integer"`
}

// String returns the string representation
func (s ScanOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s ScanOutput) GoString() string {
	return s.String()
}

// Represents the DynamoDB Streams configuration for a table in DynamoDB.
type StreamSpecification struct {
	_ struct{} `type:"structure"`

	// Indicates whether DynamoDB Streams is enabled (true) or disabled (false)
	// on the table.
	StreamEnabled *bool `type:"boolean"`

	// The DynamoDB Streams settings for the table. These settings consist of:
	//
	//    StreamEnabled - Indicates whether DynamoDB Streams is enabled (true)
	// or disabled (false) on the table.
	//
	//    StreamViewType - When an item in the table is modified, StreamViewType
	// determines what information is written to the stream for this table. Valid
	// values for StreamViewType are:
	//
	//    KEYS_ONLY - Only the key attributes of the modified item are written
	// to the stream.
	//
	//    NEW_IMAGE - The entire item, as it appears after it was modified, is
	// written to the stream.
	//
	//    OLD_IMAGE - The entire item, as it appeared before it was modified, is
	// written to the stream.
	//
	//    NEW_AND_OLD_IMAGES - Both the new and the old item images of the item
	// are written to the stream.
	StreamViewType *string `type:"string" enum:"StreamViewType"`
}

// String returns the string representation
func (s StreamSpecification) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s StreamSpecification) GoString() string {
	return s.String()
}

// Represents the properties of a table.
type TableDescription struct {
	_ struct{} `type:"structure"`

	// An array of AttributeDefinition objects. Each of these objects describes
	// one attribute in the table and index key schema.
	//
	// Each AttributeDefinition object in this array is composed of:
	//
	//    AttributeName - The name of the attribute.
	//
	//    AttributeType - The data type for the attribute.
	AttributeDefinitions []*AttributeDefinition `type:"list"`

	// The date and time when the table was created, in UNIX epoch time (http://www.epochconverter.com/)
	// format.
	CreationDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The global secondary indexes, if any, on the table. Each index is scoped
	// to a given partition key value. Each element is composed of:
	//
	//    Backfilling - If true, then the index is currently in the backfilling
	// phase. Backfilling occurs only when a new global secondary index is added
	// to the table; it is the process by which DynamoDB populates the new index
	// with data from the table. (This attribute does not appear for indexes that
	// were created during a CreateTable operation.)
	//
	//    IndexName - The name of the global secondary index.
	//
	//    IndexSizeBytes - The total size of the global secondary index, in bytes.
	// DynamoDB updates this value approximately every six hours. Recent changes
	// might not be reflected in this value.
	//
	//    IndexStatus - The current status of the global secondary index:
	//
	//    CREATING - The index is being created.
	//
	//    UPDATING - The index is being updated.
	//
	//    DELETING - The index is being deleted.
	//
	//    ACTIVE - The index is ready for use.
	//
	//      ItemCount - The number of items in the global secondary index. DynamoDB
	// updates this value approximately every six hours. Recent changes might not
	// be reflected in this value.
	//
	//    KeySchema - Specifies the complete index key schema. The attribute names
	// in the key schema must be between 1 and 255 characters (inclusive). The key
	// schema must begin with the same partition key as the table.
	//
	//    Projection - Specifies attributes that are copied (projected) from the
	// table into the index. These are in addition to the primary key attributes
	// and index key attributes, which are automatically projected. Each attribute
	// specification is composed of:
	//
	//    ProjectionType - One of the following:
	//
	//    KEYS_ONLY - Only the index and primary keys are projected into the index.
	//
	//    INCLUDE - Only the specified table attributes are projected into the
	// index. The list of projected attributes are in NonKeyAttributes.
	//
	//    ALL - All of the table attributes are projected into the index.
	//
	//      NonKeyAttributes - A list of one or more non-key attribute names that
	// are projected into the secondary index. The total count of attributes provided
	// in NonKeyAttributes, summed across all of the secondary indexes, must not
	// exceed 20. If you project the same attribute into two different indexes,
	// this counts as two distinct attributes when determining the total.
	//
	//      ProvisionedThroughput - The provisioned throughput settings for the
	// global secondary index, consisting of read and write capacity units, along
	// with data about increases and decreases.
	//
	//   If the table is in the DELETING state, no information about indexes will
	// be returned.
	GlobalSecondaryIndexes []*GlobalSecondaryIndexDescription `type:"list"`

	// The number of items in the specified table. DynamoDB updates this value approximately
	// every six hours. Recent changes might not be reflected in this value.
	ItemCount *int64 `type:"long"`

	// The primary key structure for the table. Each KeySchemaElement consists of:
	//
	//    AttributeName - The name of the attribute.
	//
	//    KeyType - The role of the attribute:
	//
	//    HASH - partition key
	//
	//    RANGE - sort key
	//
	//    The partition key of an item is also known as its hash attribute. The
	// term "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	//
	//    For more information about primary keys, see Primary Key (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DataModel.html#DataModelPrimaryKey)
	// in the Amazon DynamoDB Developer Guide.
	KeySchema []*KeySchemaElement `min:"1" type:"list"`

	// The Amazon Resource Name (ARN) that uniquely identifies the latest stream
	// for this table.
	LatestStreamArn *string `min:"37" type:"string"`

	// A timestamp, in ISO 8601 format, for this stream.
	//
	// Note that LatestStreamLabel is not a unique identifier for the stream, because
	// it is possible that a stream from another table might have the same timestamp.
	// However, the combination of the following three elements is guaranteed to
	// be unique:
	//
	//   the AWS customer ID.
	//
	//   the table name.
	//
	//   the StreamLabel.
	LatestStreamLabel *string `type:"string"`

	// Represents one or more local secondary indexes on the table. Each index is
	// scoped to a given partition key value. Tables with one or more local secondary
	// indexes are subject to an item collection size limit, where the amount of
	// data within a given item collection cannot exceed 10 GB. Each element is
	// composed of:
	//
	//    IndexName - The name of the local secondary index.
	//
	//    KeySchema - Specifies the complete index key schema. The attribute names
	// in the key schema must be between 1 and 255 characters (inclusive). The key
	// schema must begin with the same partition key as the table.
	//
	//    Projection - Specifies attributes that are copied (projected) from the
	// table into the index. These are in addition to the primary key attributes
	// and index key attributes, which are automatically projected. Each attribute
	// specification is composed of:
	//
	//    ProjectionType - One of the following:
	//
	//    KEYS_ONLY - Only the index and primary keys are projected into the index.
	//
	//    INCLUDE - Only the specified table attributes are projected into the
	// index. The list of projected attributes are in NonKeyAttributes.
	//
	//    ALL - All of the table attributes are projected into the index.
	//
	//      NonKeyAttributes - A list of one or more non-key attribute names that
	// are projected into the secondary index. The total count of attributes provided
	// in NonKeyAttributes, summed across all of the secondary indexes, must not
	// exceed 20. If you project the same attribute into two different indexes,
	// this counts as two distinct attributes when determining the total.
	//
	//      IndexSizeBytes - Represents the total size of the index, in bytes.
	// DynamoDB updates this value approximately every six hours. Recent changes
	// might not be reflected in this value.
	//
	//    ItemCount - Represents the number of items in the index. DynamoDB updates
	// this value approximately every six hours. Recent changes might not be reflected
	// in this value.
	//
	//   If the table is in the DELETING state, no information about indexes will
	// be returned.
	LocalSecondaryIndexes []*LocalSecondaryIndexDescription `type:"list"`

	// The provisioned throughput settings for the table, consisting of read and
	// write capacity units, along with data about increases and decreases.
	ProvisionedThroughput *ProvisionedThroughputDescription `type:"structure"`

	// The current DynamoDB Streams configuration for the table.
	StreamSpecification *StreamSpecification `type:"structure"`

	// The Amazon Resource Name (ARN) that uniquely identifies the table.
	TableArn *string `type:"string"`

	// The name of the table.
	TableName *string `min:"3" type:"string"`

	// The total size of the specified table, in bytes. DynamoDB updates this value
	// approximately every six hours. Recent changes might not be reflected in this
	// value.
	TableSizeBytes *int64 `type:"long"`

	// The current state of the table:
	//
	//    CREATING - The table is being created.
	//
	//    UPDATING - The table is being updated.
	//
	//    DELETING - The table is being deleted.
	//
	//    ACTIVE - The table is ready for use.
	TableStatus *string `type:"string" enum:"TableStatus"`
}

// String returns the string representation
func (s TableDescription) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s TableDescription) GoString() string {
	return s.String()
}

// Represents the new provisioned throughput settings to be applied to a global
// secondary index.
type UpdateGlobalSecondaryIndexAction struct {
	_ struct{} `type:"structure"`

	// The name of the global secondary index to be updated.
	IndexName *string `min:"3" type:"string" required:"true"`

	// Represents the provisioned throughput settings for a specified table or index.
	// The settings can be modified using the UpdateTable operation.
	//
	// For current minimum and maximum provisioned throughput values, see Limits
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	ProvisionedThroughput *ProvisionedThroughput `type:"structure" required:"true"`
}

// String returns the string representation
func (s UpdateGlobalSecondaryIndexAction) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s UpdateGlobalSecondaryIndexAction) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *UpdateGlobalSecondaryIndexAction) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "UpdateGlobalSecondaryIndexAction"}
	if s.IndexName == nil {
		invalidParams.Add(request.NewErrParamRequired("IndexName"))
	}
	if s.IndexName != nil && len(*s.IndexName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("IndexName", 3))
	}
	if s.ProvisionedThroughput == nil {
		invalidParams.Add(request.NewErrParamRequired("ProvisionedThroughput"))
	}
	if s.ProvisionedThroughput != nil {
		if err := s.ProvisionedThroughput.Validate(); err != nil {
			invalidParams.AddNested("ProvisionedThroughput", err.(request.ErrInvalidParams))
		}
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the input of an UpdateItem operation.
type UpdateItemInput struct {
	_ struct{} `type:"structure"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use UpdateExpression instead. Do not combine legacy parameters and
	// expression parameters in a single API call; otherwise, DynamoDB will return
	// a ValidationException exception.
	//
	// This parameter can be used for modifying top-level attributes; however,
	// it does not support individual list or map elements.
	//
	//  The names of attributes to be modified, the action to perform on each,
	// and the new value for each. If you are updating an attribute that is an index
	// key attribute for any indexes on that table, the attribute type must match
	// the index key type defined in the AttributesDefinition of the table description.
	// You can use UpdateItem to update any non-key attributes.
	//
	// Attribute values cannot be null. String and Binary type attributes must
	// have lengths greater than zero. Set type attributes must not be empty. Requests
	// with empty values will be rejected with a ValidationException exception.
	//
	// Each AttributeUpdates element consists of an attribute name to modify, along
	// with the following:
	//
	//    Value - The new value, if applicable, for this attribute.
	//
	//    Action - A value that specifies how to perform the update. This action
	// is only valid for an existing attribute whose data type is Number or is a
	// set; do not use ADD for other data types.
	//
	// If an item with the specified primary key is found in the table, the following
	// values perform the following actions:
	//
	//    PUT - Adds the specified attribute to the item. If the attribute already
	// exists, it is replaced by the new value.
	//
	//    DELETE - Removes the attribute and its value, if no value is specified
	// for DELETE. The data type of the specified value must match the existing
	// value's data type.
	//
	// If a set of values is specified, then those values are subtracted from the
	// old set. For example, if the attribute value was the set [a,b,c] and the
	// DELETE action specifies [a,c], then the final attribute value is [b]. Specifying
	// an empty set is an error.
	//
	//    ADD - Adds the specified value to the item, if the attribute does not
	// already exist. If the attribute does exist, then the behavior of ADD depends
	// on the data type of the attribute:
	//
	//   If the existing attribute is a number, and if Value is also a number,
	// then Value is mathematically added to the existing attribute. If Value is
	// a negative number, then it is subtracted from the existing attribute.
	//
	//  If you use ADD to increment or decrement a number value for an item that
	// doesn't exist before the update, DynamoDB uses 0 as the initial value.
	//
	// Similarly, if you use ADD for an existing item to increment or decrement
	// an attribute value that doesn't exist before the update, DynamoDB uses 0
	// as the initial value. For example, suppose that the item you want to update
	// doesn't have an attribute named itemcount, but you decide to ADD the number
	// 3 to this attribute anyway. DynamoDB will create the itemcount attribute,
	// set its initial value to 0, and finally add 3 to it. The result will be a
	// new itemcount attribute, with a value of 3.
	//
	//    If the existing data type is a set, and if Value is also a set, then
	// Value is appended to the existing set. For example, if the attribute value
	// is the set [1,2], and the ADD action specified [3], then the final attribute
	// value is [1,2,3]. An error occurs if an ADD action is specified for a set
	// attribute and the attribute type specified does not match the existing set
	// type.
	//
	// Both sets must have the same primitive data type. For example, if the existing
	// data type is a set of strings, Value must also be a set of strings.
	//
	//     If no item with the specified key is found in the table, the following
	// values perform the following actions:
	//
	//    PUT - Causes DynamoDB to create a new item with the specified primary
	// key, and then adds the attribute.
	//
	//    DELETE - Nothing happens, because attributes cannot be deleted from a
	// nonexistent item. The operation succeeds, but DynamoDB does not create a
	// new item.
	//
	//    ADD - Causes DynamoDB to create an item with the supplied primary key
	// and number (or set of numbers) for the attribute value. The only data types
	// allowed are Number and Number Set.
	//
	//     If you provide any attributes that are part of an index key, then the
	// data types for those attributes must match those of the schema in the table's
	// attribute definition.
	AttributeUpdates map[string]*AttributeValueUpdate `type:"map"`

	// A condition that must be satisfied in order for a conditional update to succeed.
	//
	// An expression can contain any of the following:
	//
	//   Functions: attribute_exists | attribute_not_exists | attribute_type |
	// contains | begins_with | size
	//
	// These function names are case-sensitive.
	//
	//   Comparison operators:  = | &#x3C;&#x3E; | &#x3C; | &#x3E; | &#x3C;= |
	// &#x3E;= | BETWEEN | IN
	//
	//    Logical operators: AND | OR | NOT
	//
	//   For more information on condition expressions, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//   ConditionExpression replaces the legacy ConditionalOperator and Expected
	// parameters.
	ConditionExpression *string `type:"string"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use ConditionExpression instead. Do not combine legacy parameters
	// and expression parameters in a single API call; otherwise, DynamoDB will
	// return a ValidationException exception.
	//
	//  A logical operator to apply to the conditions in the Expected map:
	//
	//    AND - If all of the conditions evaluate to true, then the entire map
	// evaluates to true.
	//
	//    OR - If at least one of the conditions evaluate to true, then the entire
	// map evaluates to true.
	//
	//   If you omit ConditionalOperator, then AND is the default.
	//
	// The operation will succeed only if the entire map evaluates to true.
	//
	//  This parameter does not support attributes of type List or Map.
	ConditionalOperator *string `type:"string" enum:"ConditionalOperator"`

	// This is a legacy parameter, for backward compatibility. New applications
	// should use  ConditionExpression  instead. Do not combine legacy parameters
	// and expression parameters in a single API call; otherwise, DynamoDB will
	// return a ValidationException exception.
	//
	//  A map of attribute/condition pairs. Expected provides a conditional block
	// for the UpdateItem operation.
	//
	// Each element of Expected consists of an attribute name, a comparison operator,
	// and one or more values. DynamoDB compares the attribute with the value(s)
	// you supplied, using the comparison operator. For each Expected element, the
	// result of the evaluation is either true or false.
	//
	// If you specify more than one element in the Expected map, then by default
	// all of the conditions must evaluate to true. In other words, the conditions
	// are ANDed together. (You can use the ConditionalOperator parameter to OR
	// the conditions instead. If you do this, then at least one of the conditions
	// must evaluate to true, rather than all of them.)
	//
	// If the Expected map evaluates to true, then the conditional operation succeeds;
	// otherwise, it fails.
	//
	//  Expected contains the following:
	//
	//    AttributeValueList - One or more values to evaluate against the supplied
	// attribute. The number of values in the list depends on the ComparisonOperator
	// being used.
	//
	// For type Number, value comparisons are numeric.
	//
	// String value comparisons for greater than, equals, or less than are based
	// on ASCII character code values. For example, a is greater than A, and a is
	// greater than B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
	// (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters).
	//
	// For type Binary, DynamoDB treats each byte of the binary data as unsigned
	// when it compares binary values.
	//
	//    ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList.
	// When performing the comparison, DynamoDB uses strongly consistent reads.
	//
	// The following comparison operators are available:
	//
	//  EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS
	// | BEGINS_WITH | IN | BETWEEN
	//
	// The following are descriptions of each comparison operator.
	//
	//    EQ : Equal. EQ is supported for all datatypes, including lists and maps.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, Binary, String Set, Number Set, or Binary Set. If an item
	// contains an AttributeValue element of a different type than the one provided
	// in the request, the value does not match. For example, {"S":"6"} does not
	// equal {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//     NE : Not equal. NE is supported for all datatypes, including lists and
	// maps.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, Binary, String Set, Number Set, or Binary Set. If an item contains
	// an AttributeValue of a different type than the one provided in the request,
	// the value does not match. For example, {"S":"6"} does not equal {"N":"6"}.
	// Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//     LE : Less than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     LT : Less than.
	//
	//  AttributeValueList can contain only one AttributeValue of type String,
	// Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GE : Greater than or equal.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     GT : Greater than.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	//     NOT_NULL : The attribute exists. NOT_NULL is supported for all datatypes,
	// including lists and maps.
	//
	//  This operator tests for the existence of an attribute, not its data type.
	// If the data type of attribute "a" is null, and you evaluate it using NOT_NULL,
	// the result is a Boolean true. This result is because the attribute "a" exists;
	// its data type is not relevant to the NOT_NULL comparison operator.
	//
	//     NULL : The attribute does not exist. NULL is supported for all datatypes,
	// including lists and maps.
	//
	//  This operator tests for the nonexistence of an attribute, not its data
	// type. If the data type of attribute "a" is null, and you evaluate it using
	// NULL, the result is a Boolean false. This is because the attribute "a" exists;
	// its data type is not relevant to the NULL comparison operator.
	//
	//     CONTAINS : Checks for a subsequence, or value in a set.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If the target attribute of the
	// comparison is of type String, then the operator checks for a substring match.
	// If the target attribute of the comparison is of type Binary, then the operator
	// looks for a subsequence of the target that matches the input. If the target
	// attribute of the comparison is a set ("SS", "NS", or "BS"), then the operator
	// evaluates to true if it finds an exact match with any member of the set.
	//
	// CONTAINS is supported for lists: When evaluating "a CONTAINS b", "a" can
	// be a list; however, "b" cannot be a set, a map, or a list.
	//
	//    NOT_CONTAINS : Checks for absence of a subsequence, or absence of a value
	// in a set.
	//
	//  AttributeValueList can contain only one AttributeValue element of type
	// String, Number, or Binary (not a set type). If the target attribute of the
	// comparison is a String, then the operator checks for the absence of a substring
	// match. If the target attribute of the comparison is Binary, then the operator
	// checks for the absence of a subsequence of the target that matches the input.
	// If the target attribute of the comparison is a set ("SS", "NS", or "BS"),
	// then the operator evaluates to true if it does not find an exact match with
	// any member of the set.
	//
	// NOT_CONTAINS is supported for lists: When evaluating "a NOT CONTAINS b",
	// "a" can be a list; however, "b" cannot be a set, a map, or a list.
	//
	//    BEGINS_WITH : Checks for a prefix.
	//
	//  AttributeValueList can contain only one AttributeValue of type String or
	// Binary (not a Number or a set type). The target attribute of the comparison
	// must be of type String or Binary (not a Number or a set type).
	//
	//     IN : Checks for matching elements within two sets.
	//
	//  AttributeValueList can contain one or more AttributeValue elements of type
	// String, Number, or Binary (not a set type). These attributes are compared
	// against an existing set type attribute of an item. If any elements of the
	// input set are present in the item attribute, the expression evaluates to
	// true.
	//
	//    BETWEEN : Greater than or equal to the first value, and less than or
	// equal to the second value.
	//
	//  AttributeValueList must contain two AttributeValue elements of the same
	// type, either String, Number, or Binary (not a set type). A target attribute
	// matches if the target value is greater than, or equal to, the first element
	// and less than, or equal to, the second element. If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not compare to {"N":"6"}. Also,
	// {"N":"6"} does not compare to {"NS":["6", "2", "1"]}
	//
	//     For usage examples of AttributeValueList and ComparisonOperator, see
	// Legacy Conditional Parameters (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	// For backward compatibility with previous DynamoDB releases, the following
	// parameters can be used instead of AttributeValueList and ComparisonOperator:
	//
	//    Value - A value for DynamoDB to compare with an attribute.
	//
	//    Exists - A Boolean value that causes DynamoDB to evaluate the value before
	// attempting the conditional operation:
	//
	//   If Exists is true, DynamoDB will check to see if that attribute value
	// already exists in the table. If it is found, then the condition evaluates
	// to true; otherwise the condition evaluate to false.
	//
	//   If Exists is false, DynamoDB assumes that the attribute value does not
	// exist in the table. If in fact the value does not exist, then the assumption
	// is valid and the condition evaluates to true. If the value is found, despite
	// the assumption that it does not exist, the condition evaluates to false.
	//
	//   Note that the default value for Exists is true.
	//
	//   The Value and Exists parameters are incompatible with AttributeValueList
	// and ComparisonOperator. Note that if you use both sets of parameters at once,
	// DynamoDB will return a ValidationException exception.
	//
	//  This parameter does not support attributes of type List or Map.
	Expected map[string]*ExpectedAttributeValue `type:"map"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//   To access an attribute whose name conflicts with a DynamoDB reserved word.
	//
	//   To create a placeholder for repeating occurrences of an attribute name
	// in an expression.
	//
	//   To prevent special characters in an attribute name from being misinterpreted
	// in an expression.
	//
	//   Use the # character in an expression to dereference an attribute name.
	// For example, consider the following attribute name:
	//
	//    Percentile
	//
	//   The name of this attribute conflicts with a reserved word, so it cannot
	// be used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    {"#P":"Percentile"}
	//
	//   You could then use this substitution in an expression, as in this example:
	//
	//    #P = :val
	//
	//    Tokens that begin with the : character are expression attribute values,
	// which are placeholders for the actual value at runtime.
	//
	//  For more information on expression attribute names, see Accessing Item
	// Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// One or more values that can be substituted in an expression.
	//
	// Use the : (colon) character in an expression to dereference an attribute
	// value. For example, suppose that you wanted to check whether the value of
	// the ProductStatus attribute was one of the following:
	//
	//  Available | Backordered | Discontinued
	//
	// You would first need to specify ExpressionAttributeValues as follows:
	//
	//  { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"}
	// }
	//
	// You could then use these values in an expression, such as this:
	//
	//  ProductStatus IN (:avail, :back, :disc)
	//
	// For more information on expression attribute values, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeValues map[string]*AttributeValue `type:"map"`

	// The primary key of the item to be updated. Each element consists of an attribute
	// name and a value for that attribute.
	//
	// For the primary key, you must provide all of the attributes. For example,
	// with a simple primary key, you only need to provide a value for the partition
	// key. For a composite primary key, you must provide values for both the partition
	// key and the sort key.
	Key map[string]*AttributeValue `type:"map" required:"true"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    INDEXES - The response includes the aggregate ConsumedCapacity for the
	// operation, together with ConsumedCapacity for each table and secondary index
	// that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	// any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity
	// information for table(s).
	//
	//    TOTAL - The response includes only the aggregate ConsumedCapacity for
	// the operation.
	//
	//    NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// Determines whether item collection metrics are returned. If set to SIZE,
	// the response includes statistics about item collections, if any, that were
	// modified during the operation are returned in the response. If set to NONE
	// (the default), no statistics are returned.
	ReturnItemCollectionMetrics *string `type:"string" enum:"ReturnItemCollectionMetrics"`

	// Use ReturnValues if you want to get the item attributes as they appeared
	// either before or after they were updated. For UpdateItem, the valid values
	// are:
	//
	//    NONE - If ReturnValues is not specified, or if its value is NONE, then
	// nothing is returned. (This setting is the default for ReturnValues.)
	//
	//    ALL_OLD - If UpdateItem overwrote an attribute name-value pair, then
	// the content of the old item is returned.
	//
	//    UPDATED_OLD - The old versions of only the updated attributes are returned.
	//
	//    ALL_NEW - All of the attributes of the new version of the item are returned.
	//
	//    UPDATED_NEW - The new versions of only the updated attributes are returned.
	//
	//   There is no additional cost associated with requesting a return value
	// aside from the small network and processing overhead of receiving a larger
	// response. No Read Capacity Units are consumed.
	//
	// Values returned are strongly consistent
	ReturnValues *string `type:"string" enum:"ReturnValue"`

	// The name of the table containing the item to update.
	TableName *string `min:"3" type:"string" required:"true"`

	// An expression that defines one or more attributes to be updated, the action
	// to be performed on them, and new value(s) for them.
	//
	// The following action values are available for UpdateExpression.
	//
	//    SET - Adds one or more attributes and values to an item. If any of these
	// attribute already exist, they are replaced by the new values. You can also
	// use SET to add or subtract from an attribute that is of type Number. For
	// example: SET myNum = myNum + :val
	//
	//  SET supports the following functions:
	//
	//    if_not_exists (path, operand) - if the item does not contain an attribute
	// at the specified path, then if_not_exists evaluates to operand; otherwise,
	// it evaluates to path. You can use this function to avoid overwriting an attribute
	// that may already be present in the item.
	//
	//    list_append (operand, operand) - evaluates to a list with a new element
	// added to it. You can append the new element to the start or the end of the
	// list by reversing the order of the operands.
	//
	//   These function names are case-sensitive.
	//
	//    REMOVE - Removes one or more attributes from an item.
	//
	//    ADD - Adds the specified value to the item, if the attribute does not
	// already exist. If the attribute does exist, then the behavior of ADD depends
	// on the data type of the attribute:
	//
	//   If the existing attribute is a number, and if Value is also a number,
	// then Value is mathematically added to the existing attribute. If Value is
	// a negative number, then it is subtracted from the existing attribute.
	//
	//  If you use ADD to increment or decrement a number value for an item that
	// doesn't exist before the update, DynamoDB uses 0 as the initial value.
	//
	// Similarly, if you use ADD for an existing item to increment or decrement
	// an attribute value that doesn't exist before the update, DynamoDB uses 0
	// as the initial value. For example, suppose that the item you want to update
	// doesn't have an attribute named itemcount, but you decide to ADD the number
	// 3 to this attribute anyway. DynamoDB will create the itemcount attribute,
	// set its initial value to 0, and finally add 3 to it. The result will be a
	// new itemcount attribute in the item, with a value of 3.
	//
	//    If the existing data type is a set and if Value is also a set, then Value
	// is added to the existing set. For example, if the attribute value is the
	// set [1,2], and the ADD action specified [3], then the final attribute value
	// is [1,2,3]. An error occurs if an ADD action is specified for a set attribute
	// and the attribute type specified does not match the existing set type.
	//
	// Both sets must have the same primitive data type. For example, if the existing
	// data type is a set of strings, the Value must also be a set of strings.
	//
	//    The ADD action only supports Number and set data types. In addition,
	// ADD can only be used on top-level attributes, not nested attributes.
	//
	//     DELETE - Deletes an element from a set.
	//
	// If a set of values is specified, then those values are subtracted from the
	// old set. For example, if the attribute value was the set [a,b,c] and the
	// DELETE action specifies [a,c], then the final attribute value is [b]. Specifying
	// an empty set is an error.
	//
	//  The DELETE action only supports set data types. In addition, DELETE can
	// only be used on top-level attributes, not nested attributes.
	//
	//    You can have many actions in a single expression, such as the following:
	// SET a=:value1, b=:value2 DELETE :value3, :value4, :value5
	//
	// For more information on update expressions, see Modifying Items and Attributes
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.Modifying.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	//   UpdateExpression replaces the legacy AttributeUpdates parameter.
	UpdateExpression *string `type:"string"`
}

// String returns the string representation
func (s UpdateItemInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s UpdateItemInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *UpdateItemInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "UpdateItemInput"}
	if s.Key == nil {
		invalidParams.Add(request.NewErrParamRequired("Key"))
	}
	if s.TableName == nil {
		invalidParams.Add(request.NewErrParamRequired("TableName"))
	}
	if s.TableName != nil && len(*s.TableName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("TableName", 3))
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of an UpdateItem operation.
type UpdateItemOutput struct {
	_ struct{} `type:"structure"`

	// A map of attribute values as they appeared before the UpdateItem operation.
	// This map only appears if ReturnValues was specified as something other than
	// NONE in the request. Each element represents one attribute.
	Attributes map[string]*AttributeValue `type:"map"`

	// The capacity units consumed by an operation. The data returned includes the
	// total provisioned throughput consumed, along with statistics for the table
	// and any indexes involved in the operation. ConsumedCapacity is only returned
	// if the request asked for it. For more information, see Provisioned Throughput
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// Information about item collections, if any, that were affected by the operation.
	// ItemCollectionMetrics is only returned if the request asked for it. If the
	// table does not have any local secondary indexes, this information is not
	// returned in the response.
	ItemCollectionMetrics *ItemCollectionMetrics `type:"structure"`
}

// String returns the string representation
func (s UpdateItemOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s UpdateItemOutput) GoString() string {
	return s.String()
}

// Represents the input of an UpdateTable operation.
type UpdateTableInput struct {
	_ struct{} `type:"structure"`

	// An array of attributes that describe the key schema for the table and indexes.
	// If you are adding a new global secondary index to the table, AttributeDefinitions
	// must include the key element(s) of the new index.
	AttributeDefinitions []*AttributeDefinition `type:"list"`

	// An array of one or more global secondary indexes for the table. For each
	// index in the array, you can request one action:
	//
	//    Create - add a new global secondary index to the table.
	//
	//    Update - modify the provisioned throughput settings of an existing global
	// secondary index.
	//
	//    Delete - remove a global secondary index from the table.
	//
	//   For more information, see Managing Global Secondary Indexes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GSI.OnlineOps.html)
	// in the Amazon DynamoDB Developer Guide.
	GlobalSecondaryIndexUpdates []*GlobalSecondaryIndexUpdate `type:"list"`

	// Represents the provisioned throughput settings for a specified table or index.
	// The settings can be modified using the UpdateTable operation.
	//
	// For current minimum and maximum provisioned throughput values, see Limits
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	ProvisionedThroughput *ProvisionedThroughput `type:"structure"`

	// Represents the DynamoDB Streams configuration for the table.
	//
	//  You will receive a ResourceInUseException if you attempt to enable a stream
	// on a table that already has a stream, or if you attempt to disable a stream
	// on a table which does not have a stream.
	StreamSpecification *StreamSpecification `type:"structure"`

	// The name of the table to be updated.
	TableName *string `min:"3" type:"string" required:"true"`
}

// String returns the string representation
func (s UpdateTableInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s UpdateTableInput) GoString() string {
	return s.String()
}

// Validate inspects the fields of the type to determine if they are valid.
func (s *UpdateTableInput) Validate() error {
	invalidParams := request.ErrInvalidParams{Context: "UpdateTableInput"}
	if s.TableName == nil {
		invalidParams.Add(request.NewErrParamRequired("TableName"))
	}
	if s.TableName != nil && len(*s.TableName) < 3 {
		invalidParams.Add(request.NewErrParamMinLen("TableName", 3))
	}
	if s.AttributeDefinitions != nil {
		for i, v := range s.AttributeDefinitions {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "AttributeDefinitions", i), err.(request.ErrInvalidParams))
			}
		}
	}
	if s.GlobalSecondaryIndexUpdates != nil {
		for i, v := range s.GlobalSecondaryIndexUpdates {
			if v == nil {
				continue
			}
			if err := v.Validate(); err != nil {
				invalidParams.AddNested(fmt.Sprintf("%s[%v]", "GlobalSecondaryIndexUpdates", i), err.(request.ErrInvalidParams))
			}
		}
	}
	if s.ProvisionedThroughput != nil {
		if err := s.ProvisionedThroughput.Validate(); err != nil {
			invalidParams.AddNested("ProvisionedThroughput", err.(request.ErrInvalidParams))
		}
	}

	if invalidParams.Len() > 0 {
		return invalidParams
	}
	return nil
}

// Represents the output of an UpdateTable operation.
type UpdateTableOutput struct {
	_ struct{} `type:"structure"`

	// Represents the properties of a table.
	TableDescription *TableDescription `type:"structure"`
}

// String returns the string representation
func (s UpdateTableOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s UpdateTableOutput) GoString() string {
	return s.String()
}

// Represents an operation to perform - either DeleteItem or PutItem. You can
// only request one of these operations, not both, in a single WriteRequest.
// If you do need to perform both of these operations, you will need to provide
// two separate WriteRequest objects.
type WriteRequest struct {
	_ struct{} `type:"structure"`

	// A request to perform a DeleteItem operation.
	DeleteRequest *DeleteRequest `type:"structure"`

	// A request to perform a PutItem operation.
	PutRequest *PutRequest `type:"structure"`
}

// String returns the string representation
func (s WriteRequest) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s WriteRequest) GoString() string {
	return s.String()
}

const (
	// @enum AttributeAction
	AttributeActionAdd = "ADD"
	// @enum AttributeAction
	AttributeActionPut = "PUT"
	// @enum AttributeAction
	AttributeActionDelete = "DELETE"
)

const (
	// @enum ComparisonOperator
	ComparisonOperatorEq = "EQ"
	// @enum ComparisonOperator
	ComparisonOperatorNe = "NE"
	// @enum ComparisonOperator
	ComparisonOperatorIn = "IN"
	// @enum ComparisonOperator
	ComparisonOperatorLe = "LE"
	// @enum ComparisonOperator
	ComparisonOperatorLt = "LT"
	// @enum ComparisonOperator
	ComparisonOperatorGe = "GE"
	// @enum ComparisonOperator
	ComparisonOperatorGt = "GT"
	// @enum ComparisonOperator
	ComparisonOperatorBetween = "BETWEEN"
	// @enum ComparisonOperator
	ComparisonOperatorNotNull = "NOT_NULL"
	// @enum ComparisonOperator
	ComparisonOperatorNull = "NULL"
	// @enum ComparisonOperator
	ComparisonOperatorContains = "CONTAINS"
	// @enum ComparisonOperator
	ComparisonOperatorNotContains = "NOT_CONTAINS"
	// @enum ComparisonOperator
	ComparisonOperatorBeginsWith = "BEGINS_WITH"
)

const (
	// @enum ConditionalOperator
	ConditionalOperatorAnd = "AND"
	// @enum ConditionalOperator
	ConditionalOperatorOr = "OR"
)

const (
	// @enum IndexStatus
	IndexStatusCreating = "CREATING"
	// @enum IndexStatus
	IndexStatusUpdating = "UPDATING"
	// @enum IndexStatus
	IndexStatusDeleting = "DELETING"
	// @enum IndexStatus
	IndexStatusActive = "ACTIVE"
)

const (
	// @enum KeyType
	KeyTypeHash = "HASH"
	// @enum KeyType
	KeyTypeRange = "RANGE"
)

const (
	// @enum ProjectionType
	ProjectionTypeAll = "ALL"
	// @enum ProjectionType
	ProjectionTypeKeysOnly = "KEYS_ONLY"
	// @enum ProjectionType
	ProjectionTypeInclude = "INCLUDE"
)

// Determines the level of detail about provisioned throughput consumption that
// is returned in the response:
//
//    INDEXES - The response includes the aggregate ConsumedCapacity for the
// operation, together with ConsumedCapacity for each table and secondary index
// that was accessed.
//
// Note that some operations, such as GetItem and BatchGetItem, do not access
// any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity
// information for table(s).
//
//    TOTAL - The response includes only the aggregate ConsumedCapacity for
// the operation.
//
//    NONE - No ConsumedCapacity details are included in the response.
const (
	// @enum ReturnConsumedCapacity
	ReturnConsumedCapacityIndexes = "INDEXES"
	// @enum ReturnConsumedCapacity
	ReturnConsumedCapacityTotal = "TOTAL"
	// @enum ReturnConsumedCapacity
	ReturnConsumedCapacityNone = "NONE"
)

const (
	// @enum ReturnItemCollectionMetrics
	ReturnItemCollectionMetricsSize = "SIZE"
	// @enum ReturnItemCollectionMetrics
	ReturnItemCollectionMetricsNone = "NONE"
)

const (
	// @enum ReturnValue
	ReturnValueNone = "NONE"
	// @enum ReturnValue
	ReturnValueAllOld = "ALL_OLD"
	// @enum ReturnValue
	ReturnValueUpdatedOld = "UPDATED_OLD"
	// @enum ReturnValue
	ReturnValueAllNew = "ALL_NEW"
	// @enum ReturnValue
	ReturnValueUpdatedNew = "UPDATED_NEW"
)

const (
	// @enum ScalarAttributeType
	ScalarAttributeTypeS = "S"
	// @enum ScalarAttributeType
	ScalarAttributeTypeN = "N"
	// @enum ScalarAttributeType
	ScalarAttributeTypeB = "B"
)

const (
	// @enum Select
	SelectAllAttributes = "ALL_ATTRIBUTES"
	// @enum Select
	SelectAllProjectedAttributes = "ALL_PROJECTED_ATTRIBUTES"
	// @enum Select
	SelectSpecificAttributes = "SPECIFIC_ATTRIBUTES"
	// @enum Select
	SelectCount = "COUNT"
)

const (
	// @enum StreamViewType
	StreamViewTypeNewImage = "NEW_IMAGE"
	// @enum StreamViewType
	StreamViewTypeOldImage = "OLD_IMAGE"
	// @enum StreamViewType
	StreamViewTypeNewAndOldImages = "NEW_AND_OLD_IMAGES"
	// @enum StreamViewType
	StreamViewTypeKeysOnly = "KEYS_ONLY"
)

const (
	// @enum TableStatus
	TableStatusCreating = "CREATING"
	// @enum TableStatus
	TableStatusUpdating = "UPDATING"
	// @enum TableStatus
	TableStatusDeleting = "DELETING"
	// @enum TableStatus
	TableStatusActive = "ACTIVE"
)