* command/console: return in case of errors before trying to unlock remote
state
The remote backend `Context` would exit without an active lock if there
was an error, while the local backend `Context` exited *with* a lock. This
caused a problem in `terraform console`, which would call unlock
regardless of error status.
This commit makes the local and remote backend consistently unlock the
state incase of error, and updates terraform console to check for errors
before trying to unlock the state.
* adding tests for remote and local backends
* command/init: return an error with invalid -backend-config files
The -backend-config flag expects a set of key-value pairs or a file
containing key-value pairs. If the file instead contains a full backend
configuration block, it was silently ignored. This commit adds a check
for blocks in the file and returns an error if they are encountered.
Fixes#24845
* emphasize backend configuration file in docs
This is for consistency with other commands which use prompts, all of
which require "yes" rather than "y" to confirm.
We also migrate the login command to use UIInput, which now supports
securely asking for passwords or secrets via the speakeasy library.
* internal/getproviders: decode and return any registry warnings
The public registry may include a list of warnings in the "versions"
response for any given provider. This PR adds support for warnings from
the registry and an installer event to return those warnings to the
user.
Previously, any comments inside the required provider configuration for
a given provider would be wiped out upon rerunning the 0.13upgrade
command. This commit attempts to preserve those comments if the existing
entry is semantically equivalent to the entry we are about to write.
* command: adjust exit code of state rm and state mv
Commands `state rm` and `state mv` will now exit with code 1 when the
target resource is not found in the current state.
This is consistent with `terraform state show non_existent_resource`.
Fixes#17800
We previously intentionally removed support for the allow-missing-config
option to terraform import, requiring that all imported resources have
matching config. See #24412.
However, the option was not removed from the import command, and it is
widely used. This commit reintroduces support for importing with a
missing configuration by falling back to implying the provider FQN based
on the resource type.
When using `-flag=value` with Powershell, unquoted values are broken
into separate arguments. This means that the following command:
terraform init -backend-config=./backend.conf
is interpreted by Terraform as:
terraform init -backend-config= ./backend.conf
This results in an empty backend-config setting (which is semantically
valid!) followed by a custom configuration path (pointing at a file).
Due to a bug where we could exit without printing diagnostics, this
would result in a silent failure that was very difficult to diagnose.
Some of the tests in the command package were running directly on the
fixture directories, and modifying or locking files within them. This
could cause state to leak between tests.
This commit cleans up all such cases that I could find.
We globally support a -v/-version/--version flag, which triggers the
version subcommand. The recent introduction of JSON output support meant
we started parsing the flags for the first time, but we didn't add flags
for these global version arguments.
This commit adds those flags (but doesn't check them, since they have no
effect on the version command itself). Also adds usage information for
terraform version.
The positional argument passed to apply was once used to specify a
source for a Terraform module to fetch and initialize (#337). This
functionality was removed from the init command later (#15032) but not
completely removed from apply.
This code was non-functional but largely not harmful, except for a very
specific case: when passing an absolute path to a plan file as the
positional argument on Windows, the getter.Detect code would incorrectly
interpret the path as a URL. This caused init to fail and the apply
command would exit with code 1 but without diagnostics.
This commit removes this codepath, which fixes this bug, and should
otherwise have no effect on the supported behaviour of apply.
This new version permits omitting the space between the operator and the
boundary in a ruby-style version constraint, like ">1.0.0" instead of
"> 1.0.0".
When initializing a configuration which refers to re-namespaced legacy
providers, we attempt to detect this and display a diagnostic message.
Previously this message would direct the user to run the 0.13upgrade
command, but without specifying in which directories.
This commit detects which modules are using the providers in question,
and for local modules displays a list of upgrade commands which specify
the source directories of these modules.
For remote modules, we display a separate list noting that they need to
be upgraded elsewhere, providing both the local module call name and the
module source address.
Providers can be required from multiple sources. The previous
implementation of the providers sub-command displayed only a flat list
of provider requirements, which made it difficult to see which modules
required each provider.
This commit reintroduces the tree display of provider requirements, and
adds a separate output block for providers required by existing state.
I feel the current confirmation prompt for 0.13upgrade command is
ambiguous what is expected. Actually, when I used it for the first time,
I cancelled it by typing `y` instead of `yes`.
I believe it would be great if the 0.13upgrade command tell us the
expected value for confirmation like 0.12upgrade.
Diagnostics where the highlight range has an empty overlap with a line
would skip lines of the output. This is because if two ranges abut each
other, they can be considered to overlap, but that overlap is empty.
This results in an edge case in the diagnostic printer which causes the
line not to be printed.
This new command is intended to make it easy to create or update a mirror
directory containing suitable providers for the current configuration,
producing a layout that is appropriate both for a filesystem mirror or,
if copied into the document root of an HTTP server, a network mirror.
This initial version is not customizable aside from being able to select
multiple platforms to install packages for.
Future iterations of this could include commands to turn the JSON index
generation on and off, or to instruct it to produce the unpacked directory
layout instead of the packed directory layout as it currently does. Both
of those options would make the generated directory unsuitable to be
a network mirror, but it would still work as a filesystem mirror.
In the long run this will hopefully form part of a replacement workflow to
terraform-bundle as a way to put copies of providers somewhere so we don't
need to re-download them every time, but some other changes will be needed
outside of just this command before that'd be true, such as adding support
for network and/or filesystem mirrors in Terraform Enterprise.
This is a baby-step towards an intended future where all Terraform actions
which have side-effects in either remote objects or the Terraform state
can go through the plan+apply workflow.
This initial change is focused only on allowing plan+apply for changes to
root module output values, so that these can be written into a new state
snapshot (for consumption by terraform_remote_state elsewhere) without
having to go outside of the primary workflow by running
"terraform refresh".
This is also better than "terraform refresh" because it gives an
opportunity to review the proposed changes before applying them, as we're
accustomed to with resource changes.
The downside here is that Terraform Core was not designed to produce
accurate changesets for root module outputs. Although we added a place for
it in the plan model in Terraform 0.12, Terraform Core currently produces
inaccurate changesets there which don't properly track the prior values.
We're planning to rework Terraform Core's evaluation approach in a
forthcoming release so it would itself be able to distinguish between the
prior state and the planned new state to produce an accurate changeset,
but this commit introduces a temporary stop-gap solution of implementing
the logic up in the local backend code, where we can freeze a snapshot of
the prior state before we take any other actions and then use that to
produce an accurate output changeset to decide whether the plan has
externally-visible side-effects and render any changes to output values.
This temporary approach should be replaced by a more appropriately-placed
solution in Terraform Core in a release, which should then allow further
behaviors in similar vein, such as user-visible drift detection for
resource instances.
Fetching a default namespace provider from the public registry can
result in 404 Not Found error. This might be caused by a previously-
default provider moving to a new namespace, which means that the
configuration needs to be upgraded to use an explicit provider source.
This commit adds a more detailed diagnostic for this situation,
suggesting that the intended provider might be in a new namespace. The
recommended course of action is to run the 0.13upgrade command to
generate the correct required_providers configuration.
This adds supports for "unmanaged" providers, or providers with process
lifecycles not controlled by Terraform. These providers are assumed to
be started before Terraform is launched, and are assumed to shut
themselves down after Terraform has finished running.
To do this, we must update the go-plugin dependency to v1.3.0, which
added support for the "test mode" plugin serving that powers all this.
As a side-effect of not needing to manage the process lifecycle anymore,
Terraform also no longer needs to worry about the provider's binary, as
it won't be used for anything anymore. Because of this, we can disable
the init behavior that concerns itself with downloading that provider's
binary, checking its version, and otherwise managing the binary.
This is all managed on a per-provider basis, so managed providers that
Terraform downloads, starts, and stops can be used in the same commands
as unmanaged providers. The TF_REATTACH_PROVIDERS environment variable
is added, and is a JSON encoding of the provider's address to the
information we need to connect to it.
This change enables two benefits: first, delve and other debuggers can
now be attached to provider server processes, and Terraform can connect.
This allows for attaching debuggers to provider processes, which before
was difficult to impossible. Second, it allows the SDK test framework to
host the provider in the same process as the test driver, while running
a production Terraform binary against the provider. This allows for Go's
built-in race detector and test coverage tooling to work as expected in
provider tests.
Unmanaged providers are expected to work in the exact same way as
managed providers, with one caveat: Terraform kills provider processes
and restarts them once per graph walk, meaning multiple times during
most Terraform CLI commands. As unmanaged providers can't be killed by
Terraform, and have no visibility into graph walks, unmanaged providers
are likely to have differences in how their global mutable state behaves
when compared to managed providers. Namely, unmanaged providers are
likely to retain global state when managed providers would have reset
it. Developers relying on global state should be aware of this.
Relying on the early config for provider requirements was necessary in
Terraform 0.12, to allow the 0.12upgrade command to run after init
installs providers.
However in 0.13, the same restrictions do not apply, and the detection
of provider requirements has changed. As a result, the early config
loader gives incorrect provider requirements in some circumstances,
such as those in the new test in this commit.
Therefore we are changing the init command to use the requirements found
by the full configuration loader. This also means that we can remove the
internal initwd CheckCoreVersionRequirements function.
provider is not found.
Previously a user would see the following error even if terraform was
only searching the local filesystem:
"provider registry registry.terraform.io does not have a provider named
...."
This PR adds a registry-specific error type and modifies the MultiSource
installer to check for registry errors. It will return the
registry-specific error message if there is one, but if not the error
message will list all locations searched.
Kristin Laemmert