The flatmapped representation of state prior to this commit encoded maps
and lists (and therefore by extension, sets) with a key corresponding to
the number of elements, or the unknown variable indicator under a .# key
and then individual items. For example, the list ["a", "b", "c"] would
have been encoded as:
listname.# = 3
listname.0 = "a"
listname.1 = "b"
listname.2 = "c"
And the map {"key1": "value1", "key2", "value2"} would have been encoded
as:
mapname.# = 2
mapname.key1 = "value1"
mapname.key2 = "value2"
Sets use the hash code as the key - for example a set with a (fictional)
hashcode calculation may look like:
setname.# = 2
setname.12312512 = "value1"
setname.56345233 = "value2"
Prior to the work done to extend the type system, this was sufficient
since the internal representation of these was effectively the same.
However, following the separation of maps and lists into distinct
first-class types, this encoding presents a problem: given a state file,
it is impossible to tell the encoding of an empty list and an empty map
apart. This presents problems for the type checker during interpolation,
as many interpolation functions will operate on only one of these two
structures.
This commit therefore changes the representation in state of maps to use
a "%" as the key for the number of elements. Consequently the map above
will now be encoded as:
mapname.% = 2
mapname.key1 = "value1"
mapname.key2 = "value2"
This has the effect of an empty list (or set) now being encoded as:
listname.# = 0
And an empty map now being encoded as:
mapname.% = 0
Therefore we can eliminate some nasty guessing logic from the resource
variable supplier for interpolation, at the cost of having to migrate
state up front (to follow in a subsequent commit).
In order to reduce the number of potential situations in which resources
would be "forced new", we continue to accept "#" as the count key when
reading maps via helper/schema. There is no situation under which we can
allow "#" as an actual map key in any case, as it would not be
distinguishable from a list or set in state.
This an effort to address hashicorp/terraform#516.
Adding the Sensitive attribute to the resource schema, opening up the
ability for resource maintainers to mark some fields as sensitive.
Sensitive fields are hidden in the output, and, possibly in the future,
could be encrypted.
This means it’s shown correctly in a plan and takes into account any
actions that are dependant on the tainted resource and, vice verse, any
actions that the tainted resource depends on.
So this changes the behaviour from saying this resource is tainted so
just forget about it and make sure it gets deleted in the background,
to saying I want that resource to be recreated (taking into account the
existing resource and it’s place in the graph).
In the "schema" layer a Resource is just any "thing" that has a schema
and supports some or all of the CRUD operations. Data sources introduce
a new use of Resource to represent read-only resources, which require
some different InternalValidate logic.
This adds a test and the support necessary to read from native maps
passed as variables via interpolation - for example:
```
resource ...... {
mapValue = "${var.map}"
}
```
We also add support for interpolating maps from the flat-mapped resource
config, which is necessary to support assignment of computed maps, which
is now valid.
Unfortunately there is no good way to distinguish between a list and a
map in the flatmap. In lieu of changing that representation (which is
risky), we assume that if all the keys are numeric, this is intended to
be a list, and if not it is intended to be a map. This does preclude
maps which have purely numeric keys, which should be noted as a
backwards compatibility concern.
For a long time now, the diff logic has relied on the behavior of
`mapstructure.WeakDecode` to determine how various primitives are
converted into strings. The `schema.DiffString` function is used for
all primitive field types: TypeBool, TypeInt, TypeFloat, and TypeString.
The `mapstructure` library's string representation of booleans is "0"
and "1", which differs from `strconv.FormatBool`'s "false" and "true"
(which is used in writing out boolean fields to the state).
Because of this difference, diffs have long had the potential for
cosmetically odd but semantically neutral output like:
"true" => "1"
"false" => "0"
So long as `mapstructure.Decode` or `strconv.ParseBool` are used to
interpret these strings, there's no functional problem.
We had our first clear functional problem with #6005 and friends, where
users noticed diffs like the above showing up unexpectedly and causing
troubles when `ignore_changes` was in play.
This particular bug occurs down in Terraform core's EvalIgnoreChanges.
There, the diff is modified to account for ignored attributes, and
special logic attempts to handle properly the situation where the
ignored attribute was going to trigger a resource replacement. That
logic relies on the string representations of the Old and New fields in
the diff to be the same so that it filters properly.
So therefore, we now get a bug when a diff includes `Old: "0", New:
"false"` since the strings do not match, and `ignore_changes` is not
properly handled.
Here, we introduce `TypeBool`-specific normalizing into `finalizeDiff`.
I spiked out a full `diffBool` function, but figuring out which pieces
of `diffString` to duplicate there got hairy. This seemed like a simpler
and more direct solution.
Fixes#6005 (and potentially others!)
* MaxItems defines a maximum amount of items that can exist within a
TypeSet or TypeList. Specific use cases would be if a TypeSet is being
used to wrap a complex structure, however more than one instance would
cause instability.
Changing the Set internals makes a lot of sense as it saves doing
conversions in multiple places and gives a central place to alter
the key when a item is computed.
This will have no side effects other then that the ordering is now
based on strings instead on integers, so the order will be different.
This will however have no effect on existing configs as these will
use the individual codes/keys and not the ordering to determine if
there is a diff or not.
Lastly (but I think also most importantly) there is a fix in this PR
that makes diffing sets extremely more performand. Before a full diff
required reading the complete Set for every single parameter/attribute
you wanted to diff, while now it only gets that specific parameter.
We have a use case where we have a Set that has 18 parameters and the
set consist of about 600 items (don't ask 😉). So when doing a diff
it would take 100% CPU of all cores and stay that way for almost an
hour before being able to complete the diff.
Debugging this we learned that for retrieving every single parameter
it made over 52.000 calls to `func (c *ResourceConfig) get(..)`. In
this function a slice is created and used only for the duration of the
call, so the time needed to create all needed slices and on the other
hand the time the garbage collector needed to clean them up again caused
the system to cripple itself. Next to that there are also some expensive
reflect calls in this function which also claimed a fair amount of CPU
time.
After this fix the number of calls needed to get a single parameter
dropped from 52.000+ to only 2! 😃
Previous this would return the following sort of error:
expected type 'string', got unconvertible type '[]interface {}'
This is the raw error returned by the underlying mapstructure library.
This is not a helpful error message for anyone who doesn't know Go's
type system, and it exposes Terraform's internals to the UI.
Instead we'll catch these cases before we try to use mapstructure and
return a more straightforward message.
By checking the type before the IsComputed exception this also avoids
a crash caused when the assigned value is a computed list. Otherwise
the list of interpolations is allowed through here and then crashes later
during Diff when the value is not a primitive as expected.
A common issue with new resource implementations is not considering parts
of a complex structure that's used inside a set, which causes quirky
behavior.
The schema helper has enough information to provide a default reasonable
implementation of a set function that includes all non-computed attributes
in a deterministic way. Here we implement such a function and use it
when no explicit hashing function is provided.
In order to achieve this we encapsulate the construction of the zero
value for a schema in a new method schema.ZeroValue, which allows us to
put the fallback logic to the new default function in a single spot.
It is no longer valid to use &Set{F: schema.Set} and all uses of that
construct should be replaced with schema.ZeroValue().(*Set) .
I couldn't see a simple path get this working for Maps, Sets,
and Lists, so lets land it as a primitive-only schema feature.
I think validation on primitives comprises 80% of the use cases anyways.
Guarantees that the `interface{}` arg to ValidateFunc is the proper
type, allowing implementations to be simpler.
Finish the docstring on `ValidateFunc` to call this out.
/cc @mitchellh
The runtime impl of ConfictsWith uses Resource.Get(), which makes it
work with any other attribute of the resource - the InternalValidate was
only checking against the local schemaMap though, preventing subResource
from using ConflictsWith properly.
It's a lot of wiring and it's a bit ugly, but it's not runtime code, so
I'm a bit less concerned about that aspect.
This should take care of the problem mentioned in #1909
Removed fields show a customizable error message to the user when they
are used in a Terraform config. This is a tool that provider authors can
use for user feedback as they evolve their Schemas.
refs #957
Deprecated fields show a customizable warning message to the user when
they are used in a Terraform config. This is a tool that provider
authors can use for user feedback as they evolve their Schemas.
fixes#957
We were waiting until the higher-level (m schemaMap) diffString method
to apply defaults, which was messing with set hashcode evaluation for
cases when a field with a default is included in the hash function.
fixes#824
/cc @phinze - This is pretty straightforward, almost magically so. The
reason this works is because in `diffString` we use mapstructure[1] with
"weak decode mode" to just be responisble for turning anything into a
string.
[1]: https://github.com/mitchellh/mapstructure
Don't check if the root key is being computed for composite types.
Instead, continue recursing the composite type in order to check if
the sub-key, key.N, for each individual element is being computed.
Fixes a panic which occurs when validating a composite type where
the value is an unknown kind for the schema.
This adds "field.#" values to the state/diff with the element count of a
map. This fixes a major issue around not knowing when child elements are
computed when doing variable access of a computed map.
Example, if you have a schema like this:
"foo": &Schema{
Type: TypeMap,
Computed: true,
}
And you access it like this in a resource:
${type.name.foo.computed-field}
Then Terraform will error that "field foo could not be found on resource
type.name". By adding that "foo.#" is computed, Terraform core will pick
up that it WILL exist, so its okay.
This is a refactored solution for PR #616. Functionally this is still
the same change, but it’s implemented a lot cleaner with less code and
less changes to existing parts of TF.
It’s not enough to only check if no new value is set. It can also be
that a new value is set, but contains a variable that cannot be
interpolated until a depending resource is created during the apply
fase.
I actually found this one as one of the acceptance tests for the AWS
ELB resource was failing. It failed with the following error:
```
--- FAIL: TestAccAWSELB_InstanceAttaching (177.83 seconds)
testing.go:121: Step 1 error: Error applying: aws_elb.bar: diffs
didn't match during apply. This is a bug with the resource provider,
please report a bug.
FAIL
exit status 1
FAIL github.com/hashicorp/terraform/builtin/providers/aws 177.882s
```
After a quick look I noticed it was actually a bug in core TF so added
the test and made sure all unit tests and AWS acceptance tests are now
running successfully.
builtin/providers/aws/tags_test.go:56: unrecognized printf verb 'i'
builtin/providers/aws/tags_test.go:59: unrecognized printf verb 'i'
config/config_test.go:101: possible formatting directive in Fatal call
config/config_test.go:157: possible formatting directive in Fatal call
config/module/get_file_test.go:91: missing argument for Fatalf(%s): format reads arg 1, have only 0 args
helper/schema/schema.go:341: arg v.Type for printf verb %s of wrong type: schema.ValueType
helper/schema/schema.go:656: missing argument for Errorf(%s): format reads arg 2, have only 1 args
helper/schema/schema.go:912: arg schema.Type for printf verb %s of wrong type: schema.ValueType
terraform/context.go:178: arg v.Type() for printf verb %s of wrong type: github.com/hashicorp/terraform/config.VariableType
terraform/context.go:486: arg c.Operation for printf verb %s of wrong type: terraform.walkOperation
terraform/diff_test.go💯 arg actual for printf verb %s of wrong type: terraform.DiffChangeType
terraform/diff_test.go:235: arg actual for printf verb %s of wrong type: terraform.DiffChangeType
Prior to this, the diff only contained changed set elements. The issue
with this is that `getSet`, the internal function that reads a set from
the ResourceData, expects that each level (state, config, diff, etc.)
has the _full set_ information. This change was done to fix merging
issues.
Because of this, we need to make sure the full set is visible in the
diff.
This fixes a seemingly minor issue (GH-255) around plans showing changes
when in fact there are none. But in reality this turned out to uncover a
really terrible bug.
The effect of what was happening was that multiple items in a set were
being merged. Now, they were being merged in the right order, so if you
didn't have rich types (lists in a set) then you never saw the effect
since the later value would overwrite the earlier. But with lists (such
as in security groups), you would end up with the lists merging. So, if
you had one ingress rule with CIDR blocks and one with SGs, then after
the merge both ingress rules would have BOTH CIDR and SGs, resulting in
an incorrect plan (GH-255).
This fixes the issue by introducing a `getSourceExact` bitflag to the
ResourceData source. When this is set, ALL data must come from this
level, instead of merging lower levels. In the case of sets and diffs,
this is exactly what you want: "Get me the set 'foo' from the config and
the config ONLY (not the state or diff or w/e)".
Andddddd its fixed.
GH-255
James Nugent