gophercloud/gophercloud no longer supports the APIKey authentication
attribute. Removal of this attribute may impact users who were using
the Terraform OpenStack provider in with vendor-modified clouds.
- The name cannot be empty
- The name cannot be more than 80 characters
- The name must begin with a letter or number
- The name must end with a letter, number, or underscore
- The name must only contain letters, numbers, underscores, periods, or hyphens
This commit is a maintenance change aimed at aligning file names so that they
fall in line with the established naming convention.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit changes the behaviour of the `ExistsFunc`, where by default
lack of a route table (e.g. already removed, etc.) would cause an error
to be thrown. This makes is hard to carry out any action e.g. plan,
refresh, or destroy, that rely on the route table existance check.
Also, make error messages a little better in terms of wording, etc.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
The check for ARM_SUBSCRIPTION_ID breaks the PR testing. The PR
testing isn't trying to check acceptance tests anyway.
There will still be a correct failure for missing ARM_SUBSCRIPTION_ID
when running the acceptance test due to the later testAccPreCheck().
bootscripts allow you to start Scaleway servers with a specific kernel version.
The `scaleway_server` has always had a bootscript parameter, and the
`scaleway_bootscript` datasource allows you to lookup bootscripts to be used in
conjunction with the `scaleway_server` resource.
This commit tests whether an interface is nil before type asserting it
to string - this should fix the panic reported in #8609.
We also clean up the schema definition to the newer style without
redundant type declarations.
Make sure to hash base64 decoded value since user_data might be given
either raw bytes or base64 value.
This helps https://github.com/hashicorp/terraform/issues/1887 somewhat
as now you can:
1) Update user_data in AWS console.
2) Respectively update user_data in terraform code.
3) Just refresh terraform state and it should not report any changes.
This commit adds a missing unit test for the API Gateway integration type
attribute validation helper, plus changes the way how value is inspected
to a simple lookup table. Additionally, changes the wording of the error
message, and adds invalid test cases to the HTTP method validation helper.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This pull request is intended to add a temporary control to Terraform to
output more verbose logging in the case of an AuthFailure error being
returned by the AWS API.
The tag schema was changed in #9199, setting the Computed flag, this was causing
the plan to not be empty for resources which support tags but none were set, as
no value would be set by flattenAndSetTags.
Setting an empty map instead fixes the issue, ran original failing test and an
update tags test to ensure nothing else was broken.
Depends on #9305.
```
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMCdnProfile -timeout 120m
=== RUN TestAccAzureRMCdnProfile_importWithTags
--- PASS: TestAccAzureRMCdnProfile_importWithTags (171.64s)
=== RUN TestAccAzureRMCdnProfile_basic
--- PASS: TestAccAzureRMCdnProfile_basic (162.70s)
=== RUN TestAccAzureRMCdnProfile_withTags
--- PASS: TestAccAzureRMCdnProfile_withTags (203.12s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 537.538s
```
cdn_profile resource was using `Profiles` instead of `profiles` to gather the
name in the read and delete methods, added importing capability with test to
confirm read now works as expected.
```
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMCdnProfile -timeout 120m
=== RUN TestAccAzureRMCdnProfile_importWithTags
--- PASS: TestAccAzureRMCdnProfile_importWithTags (170.00s)
=== RUN TestAccAzureRMCdnProfile_basic
--- PASS: TestAccAzureRMCdnProfile_basic (166.33s)
=== RUN TestAccAzureRMCdnProfile_withTags
--- PASS: TestAccAzureRMCdnProfile_withTags (185.94s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 522.333s
```
This commits changes the behaviour in a case there was an error while
interacting with EC2 tags related to the CloudFormation Distribution
resource, fixing the issue with nil pointer dereference when despite
an error being present code path to handle tags was executed.
Also, a small re-factor of the `validateHTTP` helper method,
and a unit test added for it.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
panic on the Read func
Fixes#8995
The Diagnostics profile was a badly laid out resource. All we needed to
set was whether it was enabled and the storage account to save the logs
to. The old schema parameter was deprecated and replaced with a much
simplier structure
```
% make testacc TEST=./builtin/providers/azurerm TESTARGS='-run=TestAccAzureRMVirtualMachine_diagnosticsProfile'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/29 12:21:04 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/azurerm -v
-run=TestAccAzureRMVirtualMachine_diagnosticsProfile -timeout 120m
=== RUN TestAccAzureRMVirtualMachine_diagnosticsProfile
--- PASS: TestAccAzureRMVirtualMachine_diagnosticsProfile (1066.76s)
PASS
ok
github.com/hashicorp/terraform/builtin/providers/azurerm1066.776s
```
The Read func of the EIP has changed to set the `vpc` boolean value on
the response object having an Address. This is required as an EIP that
was specified, without a domain and then imported, would cause a
perpetual plan.
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEIP_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/23 09:28:32 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSEIP_ -timeout
120m
=== RUN TestAccAWSEIP_importEc2Classic
--- PASS: TestAccAWSEIP_importEc2Classic (116.16s)
=== RUN TestAccAWSEIP_importVpc
--- PASS: TestAccAWSEIP_importVpc (61.89s)
=== RUN TestAccAWSEIP_basic
--- PASS: TestAccAWSEIP_basic (18.86s)
=== RUN TestAccAWSEIP_instance
--- PASS: TestAccAWSEIP_instance (185.95s)
=== RUN TestAccAWSEIP_network_interface
--- PASS: TestAccAWSEIP_network_interface (63.20s)
=== RUN TestAccAWSEIP_twoEIPsOneNetworkInterface
--- PASS: TestAccAWSEIP_twoEIPsOneNetworkInterface (65.64s)
=== RUN TestAccAWSEIP_associated_user_private_ip
--- PASS: TestAccAWSEIP_associated_user_private_ip (201.34s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 713.072s
```
This commit resolves a regression introduced in #9033 that caused an
unfiltered image to be returned despite a search criteria being set
accordingly.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This allows Storage Service Encryption to be enabled.
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMStorageAccount -timeout 120m
=== RUN TestAccAzureRMStorageAccount_importBasic
--- PASS: TestAccAzureRMStorageAccount_importBasic (139.00s)
=== RUN TestAccAzureRMStorageAccount_basic
--- PASS: TestAccAzureRMStorageAccount_basic (151.03s)
=== RUN TestAccAzureRMStorageAccount_blobEncryption
--- PASS: TestAccAzureRMStorageAccount_blobEncryption (149.94s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 440.051s
This commit adds a new HTTP method to a list of valid HTTP methods which
is now accepted by API Gateway.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
A default authorization rule is created by Azure which, if present is exported by
the resource.
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMServiceBusNamespace -timeout 120m
=== RUN TestAccAzureRMServiceBusNamespaceCapacity_validation
--- PASS: TestAccAzureRMServiceBusNamespaceCapacity_validation (0.00s)
=== RUN TestAccAzureRMServiceBusNamespaceSku_validation
--- PASS: TestAccAzureRMServiceBusNamespaceSku_validation (0.00s)
=== RUN TestAccAzureRMServiceBusNamespace_basic
--- PASS: TestAccAzureRMServiceBusNamespace_basic (352.03s)
=== RUN TestAccAzureRMServiceBusNamespace_readDefaultKeys
--- PASS: TestAccAzureRMServiceBusNamespace_readDefaultKeys (349.17s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 701.278s
use us-west-2 region in tests
update test with working config
provider/aws: Update EMR contribution with passing test, polling for instance in DELETE method
remove defaulted role
document emr_cluster
rename aws_emr -> aws_emr_cluster
update docs for name change
update delete timeout/polling
rename emr taskgroup to emr instance group
default instance group count to 0, down from 60
update to ref emr_cluster, emr_instance_group
more cleanups for instance groups; need to read and update
add read, delete method for instance groups
refactor the read method to seperate out the fetching of the specific group
more refactoring for finding instance groups
update emr instance group docs
err check on reading HTTP. Dont' return the error, just log it
refactor the create method to catch optionals
additional cleanups, added a read method
update test to be non-master-only
wrap up the READ method for clusters
poll for instance group to be running after a modification
patch up a possible deref
provider/aws: EMR cleanups
fix test naming
remove outdated docs
randomize emr_profile names
quick emr resize implementation
ass task group
not force new
add task group
check empty slices
clean up
rename to initial_instance_count
add task instance group as resource
cluster resize core group
clean up
add name option
log info
clean up
change log debug format
clean up
add missing security groups for master and slave
add bootstrap actions
add options for bootstrap action
add tags option
clean up
fix for tags array
support delimiters : =
bootstrap actions fix
add configurations item
load local or remote config
rename function
support multiple bootstrap actions
default value 0 for core group
follow aws api able to create a master only
tags use terraform tag schema
option item for log_uri
ec2_attribute as option
add emr task group accTests
add embedded json config
add embedded json config
add service_role and instance_profile
add partial state support for either the "TERMINATED" or "TERMINATED_WITH_ERRORS" state
not allowing to change name or instance_type for task group
"core_instance_type" change into "Optional" and "Computed"
apply MaxItems for ec2Attributes
remove all debug "fmt.Println"
clean up debug info and useless variable
Expose visible_to_all_users as an option, default will be true
remove debug info
logging should happen before setId("")
add hanChange checking first
clean up debug log
add some force new
double check the core group existed
add waiting and polling, until cluster up
testcase add EMR cluster id and status checking
clean up using common way to read ec2_attributes
This new struct avoids requiring to repeat the struct definition in this
code here. It avoids duplication and makes it more flexible so more
options can be added to the struct without breaking the code here.
Fixes#9194
Removes the validation for the types and adds an acceptance test to make
sure we get a successful Sql Database created
```
% make testacc TEST=./builtin/providers/azurerm TESTARGS='-run=TestAccAzureRMSqlDatabase_datawarehouse'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/03 21:57:16 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/azurerm -v
-run=TestAccAzureRMSqlDatabase_datawarehouse -timeout 120m
=== RUN TestAccAzureRMSqlDatabase_datawarehouse
--- PASS: TestAccAzureRMSqlDatabase_datawarehouse (307.95s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm307.963s
```
The casing on the test name was causing it not to run with the entire
test suite
```
% make testacc TEST=./builtin/providers/aws
% TESTARGS='-run=TestAccAWSOpsworksStack' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/03 16:43:07 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSOpsworksStack
-timeout 120m
=== RUN TestAccAWSOpsworksStackImportBasic
--- PASS: TestAccAWSOpsworksStackImportBasic (49.00s)
=== RUN TestAccAWSOpsworksStackNoVpc
--- PASS: TestAccAWSOpsworksStackNoVpc (36.10s)
=== RUN TestAccAWSOpsworksStackVpc
--- PASS: TestAccAWSOpsworksStackVpc (73.27s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws158.385s
```
As noticed in the acceptance tests, we were expecting the document to be
deleted but it was still found
```
=== RUN TestAccAWSSSMDocument_permission
--- FAIL: TestAccAWSSSMDocument_permission (5.60s)
testing.go:329: Error destroying resource! WARNING: Dangling
resources
may exist. The full state and error is shown below.
Error: Check failed: Expected AWS SSM
Document to be gone, but was still found
State: <no state>
```
Some azurerm resources store resource_group_name in lowercase only.
Other store resource_group_name using lower and upper case.
Ensure that all test cases use capitalisation in resource_group_name
to find errors in diffs due to capitalisation.
Some resource_group_name were refactored to match naming scheme
across the azurerm tests.
Regressions were introduced when fixing
https://github.com/hashicorp/terraform/pull/8607 . Specifically when
resources in the statefile are deleted or missing in real life, then
terraform plan would exit with an error when it recieved a 404 not
found. The correct behaviour would be to show a plan with the offer to
create the missing resources.
If a resource ID has more than one subscriptions key, as is the case for Service
Bus subscriptions the Azure SubscriptionID field was overwritten by the second
value.
TF_ACC= go test ./builtin/providers/azurerm -run TestParseAzureResourceID -timeout=30s -parallel=4
ok github.com/hashicorp/terraform/builtin/providers/azurerm 0.060s
Fixes#9108
When an aws_route53_record alias is created with terraform and then
modified via cli or console, terraform wasn't picking up the changes. I
had the following config:
```
resource "aws_route53_record" "alias" {
zone_id = "${aws_route53_zone.main.zone_id}"
name = "www"
type = "A"
alias {
zone_id = "${aws_elb.main.zone_id}"
name = "${aws_elb.main.dns_name}"
evaluate_target_health = true
}
}
```
I changed the evaluate_health_target on the AWS console and terraform plan showed me this:
```
% terraform plan
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but
will not be persisted to local or remote state storage.
aws_route53_zone.main: Refreshing state... (ID: Z32Z9B1UPAIP6X)
aws_elb.main: Refreshing state... (ID: foobar-terraform-elb-1111)
aws_route53_record.alias: Refreshing state... (ID: Z32Z9B1UPAIP6X_www_A)
No changes. Infrastructure is up-to-date. This means that Terraform
could not detect any differences between your configuration and
the real physical resources that exist. As a result, Terraform
doesn't need to do anything.
```
When rebuilding the provider with the changes in the PR, a terraform plan then looks as follows:
```
% terraform plan
[WARN] /Users/stacko/Code/go/bin/terraform-provider-aws overrides an internal plugin for aws-provider.
If you did not expect to see this message you will need to remove the old plugin.
See https://www.terraform.io/docs/internals/internal-plugins.html
[WARN] /Users/stacko/Code/go/bin/terraform-provider-azurerm overrides an internal plugin for azurerm-provider.
If you did not expect to see this message you will need to remove the old plugin.
See https://www.terraform.io/docs/internals/internal-plugins.html
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but
will not be persisted to local or remote state storage.
aws_route53_zone.main: Refreshing state... (ID: Z32Z9B1UPAIP6X)
aws_elb.main: Refreshing state... (ID: foobar-terraform-elb-1111)
aws_route53_record.alias: Refreshing state... (ID: Z32Z9B1UPAIP6X_www_A)
The Terraform execution plan has been generated and is shown below.
Resources are shown in alphabetical order for quick scanning. Green resources
will be created (or destroyed and then created if an existing resource
exists), yellow resources are being changed in-place, and red resources
will be destroyed. Cyan entries are data sources to be read.
Note: You didn't specify an "-out" parameter to save this plan, so when
"apply" is called, Terraform can't guarantee this is what will execute.
~ aws_route53_record.alias
alias.1050468691.evaluate_target_health: "" => "true"
alias.1050468691.name: "" => "foobar-terraform-elb-1111-522021794.us-west-2.elb.amazonaws.com"
alias.1050468691.zone_id: "" => "Z1H1FL5HABSF5"
alias.2906616344.evaluate_target_health: "false" => "false"
alias.2906616344.name: "foobar-terraform-elb-1111-522021794.us-west-2.elb.amazonaws.com." => ""
alias.2906616344.zone_id: "Z1H1FL5HABSF5" => ""
Plan: 0 to add, 1 to change, 0 to destroy.
```
the apply then changed the target back to true
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRoute53Record_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/29 18:17:23 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSRoute53Record_ -timeout 120m
=== RUN TestAccAWSRoute53Record_basic
--- PASS: TestAccAWSRoute53Record_basic (120.63s)
=== RUN TestAccAWSRoute53Record_basic_fqdn
--- PASS: TestAccAWSRoute53Record_basic_fqdn (131.81s)
=== RUN TestAccAWSRoute53Record_txtSupport
--- PASS: TestAccAWSRoute53Record_txtSupport (128.40s)
=== RUN TestAccAWSRoute53Record_spfSupport
--- PASS: TestAccAWSRoute53Record_spfSupport (120.06s)
=== RUN TestAccAWSRoute53Record_generatesSuffix
--- PASS: TestAccAWSRoute53Record_generatesSuffix (114.02s)
=== RUN TestAccAWSRoute53Record_wildcard
--- PASS: TestAccAWSRoute53Record_wildcard (165.54s)
=== RUN TestAccAWSRoute53Record_failover
--- PASS: TestAccAWSRoute53Record_failover (118.10s)
=== RUN TestAccAWSRoute53Record_weighted_basic
--- PASS: TestAccAWSRoute53Record_weighted_basic (128.10s)
=== RUN TestAccAWSRoute53Record_alias
--- PASS: TestAccAWSRoute53Record_alias (132.62s)
=== RUN TestAccAWSRoute53Record_s3_alias
--- PASS: TestAccAWSRoute53Record_s3_alias (132.12s)
=== RUN TestAccAWSRoute53Record_weighted_alias
--- PASS: TestAccAWSRoute53Record_weighted_alias (237.92s)
=== RUN TestAccAWSRoute53Record_geolocation_basic
--- PASS: TestAccAWSRoute53Record_geolocation_basic (121.95s)
=== RUN TestAccAWSRoute53Record_latency_basic
--- PASS: TestAccAWSRoute53Record_latency_basic (123.40s)
=== RUN TestAccAWSRoute53Record_TypeChange
--- PASS: TestAccAWSRoute53Record_TypeChange (198.24s)
=== RUN TestAccAWSRoute53Record_empty
--- PASS: TestAccAWSRoute53Record_empty (119.68s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws2092.597s
```
Initial tests were failing as follows:
```
=== RUN TestAccAWSElasticacheCluster_importBasic
--- FAIL: TestAccAWSElasticacheCluster_importBasic (362.66s)
testing.go:265: Step 1 error: ImportStateVerify attributes not
equivalent. Difference is shown below. Top is actual, bottom is
expected.
(map[string]string) {
}
(map[string]string) (len=2) {
(string) (len=20) "parameter_group_name": (string) (len=20)
"default.memcached1.4",
(string) (len=22) "security_group_names.#":
(string) (len=1) "0"
}
FAIL
exit status 1
```
The import of ElastiCache clusters helped to point out 3 things:
1. Currently, we were trying to set the parameter_group_name as follows:
```
d.Set("parameter_group_name", c.CacheParameterGroup)
```
Unfortunately, c.CacheParameterGroup is a struct not a string. This was
causing the test import failure. So this had to be replaced as follows:
```
if c.CacheParameterGroup != nil {
d.Set("parameter_group_name", c.CacheParameterGroup.CacheParameterGroupName)
}
```
2. We were trying to set the security_group_names as follows:
```
d.Set("security_group_names", c.CacheSecurityGroups)
```
The CacheSecurityGroups was actually a []* so had to be changed to work
as follows:
```
if len(c.CacheSecurityGroups) > 0 {
d.Set("security_group_names",
flattenElastiCacheSecurityGroupNames(c.CacheSecurityGroups))
}
```
3. We were trying to set the security_group_ids as follows:
```
d.Set("security_group_ids", c.SecurityGroups)
```
This is another []* and needs to be changed as follows:
```
if len(c.SecurityGroups) > 0 {
d.Set("security_group_ids",
flattenElastiCacheSecurityGroupIds(c.SecurityGroups))
}
```
This then allows the import test to pass as expected:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElasticacheCluster_importBasic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/23 10:59:01 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSElasticacheCluster_importBasic -timeout 120m
=== RUN TestAccAWSElasticacheCluster_importBasic
--- PASS: TestAccAWSElasticacheCluster_importBasic (351.96s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 351.981s
```
As a final test, I ran the basic ElastiCache cluster creation to make
sure all passed as expected:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElasticacheCluster_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/23 11:05:51 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSElasticacheCluster_basic -timeout 120m
=== RUN TestAccAWSElasticacheCluster_basic
--- PASS: TestAccAWSElasticacheCluster_basic (809.25s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 809.267s
```
Fixes#8597
There was sometimes an issue where Terraform was deleting the ECR
repository from the statefile before the reposity was actually deleted.
Added retry logic for Terraform to wait for the repository to be deleted
before proceeding with the statefile update
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEcrRepository_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/26 12:46:57 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSEcrRepository_ -timeout 120m
=== RUN TestAccAWSEcrRepository_importBasic
--- PASS: TestAccAWSEcrRepository_importBasic (17.86s)
=== RUN TestAccAWSEcrRepository_basic
--- PASS: TestAccAWSEcrRepository_basic (16.40s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 34.288s
```
aws_elasticache_replication_group caused a panic
Fixes#9097
The update for `parameter_group_name` was trying to find the incorrect
value to set `cache_parameter_group_name` - this is what was causing the
panic
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElasticacheReplicationGroup_updateParameterGroup'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/28 11:17:30 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSElasticacheReplicationGroup_updateParameterGroup -timeout
120m
=== RUN TestAccAWSElasticacheReplicationGroup_updateParameterGroup
--- PASS: TestAccAWSElasticacheReplicationGroup_updateParameterGroup
(903.90s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws903.931s
```
values
Fixes#8332
Not all option_group parameters have values. For example, when you
enable the MariaDB option_group, some of the settings have empty values
(see screenshot)
This PR adds a safety net on reading those values back to the statefile
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBOptionGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/26 13:55:21 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSDBOptionGroup_ -timeout 120m
=== RUN TestAccAWSDBOptionGroup_importBasic
--- PASS: TestAccAWSDBOptionGroup_importBasic (20.12s)
=== RUN TestAccAWSDBOptionGroup_basic
--- PASS: TestAccAWSDBOptionGroup_basic (18.45s)
=== RUN TestAccAWSDBOptionGroup_basicDestroyWithInstance
--- PASS: TestAccAWSDBOptionGroup_basicDestroyWithInstance (597.90s)
=== RUN TestAccAWSDBOptionGroup_OptionSettings
--- PASS: TestAccAWSDBOptionGroup_OptionSettings (33.27s)
=== RUN TestAccAWSDBOptionGroup_sqlServerOptionsUpdate
--- PASS: TestAccAWSDBOptionGroup_sqlServerOptionsUpdate (33.39s)
=== RUN TestAccAWSDBOptionGroup_multipleOptions
--- PASS: TestAccAWSDBOptionGroup_multipleOptions (19.87s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 723.037s
```
Fixes#6758
We used to throw an error when this was the case - we should refresh
from state so the association can be recreated
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEIPAssociation_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/26 16:42:37 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSEIPAssociation_ -timeout 120m
=== RUN TestAccAWSEIPAssociation_basic
--- PASS: TestAccAWSEIPAssociation_basic (272.92s)
=== RUN TestAccAWSEIPAssociation_disappears
--- PASS: TestAccAWSEIPAssociation_disappears (119.62s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws392.559s
```
Fixes#9025
We were assuming there would always be a changeInfo record and then
dereferencing the ID. This wasn't always the case (As noted in #9025)
where it was a delete rather than a delete / create action
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRoute53Record_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/26 11:26:43 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSRoute53Record_ -timeout 120m
=== RUN TestAccAWSRoute53Record_basic
--- PASS: TestAccAWSRoute53Record_basic (114.99s)
=== RUN TestAccAWSRoute53Record_basic_fqdn
--- PASS: TestAccAWSRoute53Record_basic_fqdn (126.64s)
=== RUN TestAccAWSRoute53Record_txtSupport
--- PASS: TestAccAWSRoute53Record_txtSupport (113.25s)
=== RUN TestAccAWSRoute53Record_spfSupport
--- PASS: TestAccAWSRoute53Record_spfSupport (112.89s)
=== RUN TestAccAWSRoute53Record_generatesSuffix
--- PASS: TestAccAWSRoute53Record_generatesSuffix (113.29s)
=== RUN TestAccAWSRoute53Record_wildcard
--- PASS: TestAccAWSRoute53Record_wildcard (163.05s)
=== RUN TestAccAWSRoute53Record_failover
--- PASS: TestAccAWSRoute53Record_failover (121.15s)
=== RUN TestAccAWSRoute53Record_weighted_basic
--- PASS: TestAccAWSRoute53Record_weighted_basic (117.06s)
=== RUN TestAccAWSRoute53Record_alias
--- PASS: TestAccAWSRoute53Record_alias (116.97s)
=== RUN TestAccAWSRoute53Record_s3_alias
--- PASS: TestAccAWSRoute53Record_s3_alias (138.79s)
=== RUN TestAccAWSRoute53Record_weighted_alias
--- PASS: TestAccAWSRoute53Record_weighted_alias (241.48s)
=== RUN TestAccAWSRoute53Record_geolocation_basic
--- PASS: TestAccAWSRoute53Record_geolocation_basic (132.51s)
=== RUN TestAccAWSRoute53Record_latency_basic
--- PASS: TestAccAWSRoute53Record_latency_basic (121.29s)
=== RUN TestAccAWSRoute53Record_TypeChange
--- PASS: TestAccAWSRoute53Record_TypeChange (189.31s)
=== RUN TestAccAWSRoute53Record_empty
--- PASS: TestAccAWSRoute53Record_empty (127.31s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws
2050.012s
```
This commit adds simple logic which allows for a VPC Peering Connection
that is in a failed state (e.g. due to an overlapping IP address ranges,
etc.), to report such failed state as an error, rather then waiting for
the time out to occur.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
The primary purpose of this data source is to ask the question "what is
my current region?", but it can also be used to retrieve the endpoint
hostname for a particular (possibly non-current) region, should that be
useful for some esoteric case.
This adds a singular data source in addition to the existing plural one.
This allows retrieving data about a specific AZ.
As a helper for writing reusable modules, the AZ letter (without its
usual region name prefix) is exposed so that it can be used in
region-agnostic mappings where a different value is used per AZ, such as
for subnet numbering schemes.
These functions can be used within various EC2 data sources to support
querying by filter. The following cases are supported:
- Filtering by exact equality with single attribute values
- Filtering by EC2 tag key/value pairs
- Explicitly specifying raw EC2 filters in config
This should cover most of the filter use-cases for Terraform data
sources that are built on EC2's 'Describe...' family of functions.
In c244e5a6 this resource was converted to a data source, but that was
a mistake since data sources are expected to produce stable results on
each run, and yet certificate requests contain a random nonce as part of
the signature.
Additionally, using the data source as a managed resource through the
provided compatibility shim was not actually working, since "Read" was
trying to parse the private key out of a SHA1 hash of the key, which is
what we place in state due to the StateFunc on that attribute.
By restoring this we restore Terraform's ability to produce all of the
parts of a basic PKI/CA, which is useful for creating dev environments
and bootstrapping PKI for production environments.
This commit fixes the issues where in a very rare cases the Amazon Machine
Image (AMI) would not have an image name set causing regular expression match
to fail with a nil pointer dereference. Also, the logic of if-else statements
was simplified (reduced branching since return is used a lot).
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Looks like AWS updated their API and now our tests are failing
because QueryStringCacheKeys was not included in the distribution
configuration.
This adds support for specifying query string cache keys in the
CloudFront distribution configuration, which ensures that only a subset
of query string keys are actually cached when forwarding query strings,
possibly improving performance.
This fixes an issue where an empty s3_origin_config could be supplied to
aws_cloudfront_distribution, "correctly" setting an empty default value.
Unfortunately the rest of the CloudFront structure helper functions are
not equipped to deal with this kind of scenario, and TF produces
spurious diffs upon future runs.
This removes the default and makes origin_access_identity required when
specifying s3_origin_config.
Note that it has always been intended behaviour that if someone does not
want to use an origin access identity, that s3_origin_config should not
be specified at all. This behaviour still works, as should be evident by
the (still) passing tests.
Fixeshashicorp/terraform#7930.
Added http_version to aws_cloudfront_distribution, which allows
selection of the maximum HTTP version to use in the distribution.
Defaults to http2.
Fixeshashicorp/terraform#8730.
* provider/aws: Fix importing of EIP by IP address
EIPs are meant to be imported by their allocation id, however, importing
by their EIP *appears* to work because this API actually accepts IP
lookup, despite the documentation asking for the allocation id.
This PR does:
- update docs on how to import EIPs
- fix case if user imported by IP, to switch to using the alloc id for
the resource id
I chose not to document that looking up by IP is a method of import,
because the AWS API docs do not explicitly say that looking up by IP is
OK, so I'd rather people not do it if it's not documented to stay that
way.
Alternatively, we could parse the resource ID and reject it (remove from
state with error/warning) if it doesn't match the `eipalloc-*` format,
but I thought this was a bit better UX.
* fix issue with swapping IDs on EC2 Classic
* update docs
* update comment
* provider/aws: Wait for Spot Fleet to drain before removing from state
Ensures the spot fleet is drained before reporting successful destroy
and moving on
* remove unreachable code
* hack to sleep and test regression/leak
* fix broken english in warning
aws_alb_target_group will ForceNew resource
Fixes#8741
The modify-target-group doesn't allow changes to name, port, protocol or
vpc_id - therefore, they should all be ForceNew: true
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALBTargetGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/09/22 16:04:29 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSALBTargetGroup_ -timeout 120m
=== RUN TestAccAWSALBTargetGroup_basic
--- PASS: TestAccAWSALBTargetGroup_basic (50.66s)
=== RUN TestAccAWSALBTargetGroup_changeNameForceNew
--- PASS: TestAccAWSALBTargetGroup_changeNameForceNew (84.48s)
=== RUN TestAccAWSALBTargetGroup_changeProtocolForceNew
--- PASS: TestAccAWSALBTargetGroup_changeProtocolForceNew (95.89s)
=== RUN TestAccAWSALBTargetGroup_changePortForceNew
--- PASS: TestAccAWSALBTargetGroup_changePortForceNew (85.77s)
=== RUN TestAccAWSALBTargetGroup_changeVpcForceNew
--- PASS: TestAccAWSALBTargetGroup_changeVpcForceNew (85.00s)
=== RUN TestAccAWSALBTargetGroup_tags
--- PASS: TestAccAWSALBTargetGroup_tags (88.11s)
=== RUN TestAccAWSALBTargetGroup_updateHealthCheck
--- PASS: TestAccAWSALBTargetGroup_updateHealthCheck (82.15s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 572.083s
```
This commits allows for the helper function to return an error which
would bubble up from e.g. JSON parsing, etc.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
This commit also removes unnecessary code from the StateFunc function,
and reduces it so that it only uses the normalizeJsonString helper.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Added the cluster address as a separate attribute to the configuration endpoint. When using the configuration endpoint in conjunction with route 53 it was appending the cluster address with the port and invalidating the route 53 record.
* Add JSON validation to the aws_cloudwatch_event_rule resource.
This commit adds support for new helper function which is used to
normalise and validate JSON string. Also adds new validation function
to wrap around the aforementioned helper.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Re-factor validation function.
This commit changes the logic of the function so that it would check length of
the normalised JSON string over the given string, plus short-circuit early
should JSON would not be valid.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds ValidateFunc to the policy attribute so that JSON parsing
errors can be caught early. Generally, when there is a ValidateFunc set for the
attribute, one can safely assume that before any of the creation and/or update
of the existing resource would happen it would have to succeed validation. Also
adds support for new helper function which is used to normalise JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This commit adds support for new helper function which is used to
normalise and validate JSON string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add normalizeJsonString and validateJsonString functions.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add unit test for the normalizeJsonString helper function.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Fix. Remove incrrect format string.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Remove surplus type assertion.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Add unit test for the validateJsonStringhelper function.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Remove surplus whitespaces.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This comment corrects a simple typo in the error message issued when the
credentials are not working and/or do not offer access to AzureRM, etc.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Fixes#3605 and adds the functionality suggested in PR #7440.
This PR is using a different appraoch that (IMHO) feels cleaner and (even more important) adds support for Windows at the same time.
When creating a CloudWatch Metric for an Application Load Balancer it is
neccessary to use the suffix of the ARN as the reference to the load
balancer. This commit exposes that as an attribute on the `aws_alb`
resource to prevent the need to use regular expression substitution to
make the reference.
Fixes#8808.
Joe Topjian