Set the default log package output to iotuil.Discard during tests if the
`-v` flag isn't set. If we are verbose, then apply the filter according
to the TF_LOG env variable.
The concat interpolation function now only accepts list arguments.
Strings are no longer supported, for concatenation or appending to
lists. All arguments must be a list, and single elements can be promoted
with the `list` interpolation function.
Fixes the following error when cross compiling:
```
--> freebsd/amd64 error: exit status 2
Stderr: # github.com/hashicorp/terraform/config/module
config/module/inode.go:18: cannot use st.Ino (type uint32) as type uint64 in return argument
```
* `map(key, value, ...)` - Returns a map consisting of the key/value pairs
specified as arguments. Every odd argument must be a string key, and every
even argument must have the same type as the other values specified.
Duplicate keys are not allowed. Examples:
* `map("hello", "world")`
* `map("us-east", list("a", "b", "c"), "us-west", list("b", "c", "d"))`
This will allow the concat interpolation function to accept lists of
lists, and lists of maps as well as strings. We still allow bare strings
for backwards compatibility, but remove some of the old comment wording
as it could cause confusion of this function with actual string
concatenation.
Since maps are now supported in the config, this removes the superfluous
(and failing) TestInterpolationFuncConcatListOfMaps.
Allow lists and maps within the list interpolation function via variable
interpolation. Since this requires setting the variadic type to TypeAny,
we check for non-heterogeneous lists in the callback.
The list() interpolation function provides a way to add support for list
literals (of strings) to HIL without having to invent new syntax for it
and modify the HIL parser.
It presents as a function, thus:
- list() -> []
- list("a") -> ["a"]
- list("a", "b") -> ["a", "b"]
Thanks to @wr0ngway for the idea of this approach, fixes#7460.
Part of the interpolation walk is to detect keys which involve computed
values and therefore cannot be resolved at this time. The interplation
walker keeps sufficient state to be able to populate the ResourceConfig
with a slice of such keys.
Previously they didn't take slice indexes into account, so in the
following case:
```
"services": []interface{}{
map[string]interface{}{
"elb": "___something computed___",
},
map[string]interface{}{
"elb": "___something else computed___",
},
map[string]interface{}{
"elb": "not computed",
},
}
```
Unknown keys would be populated as follows:
```
services.elb
services.elb
```
This is not sufficient information to be useful, as it is impossible to
distinguish which of the `services.elb`s are unknown vs not.
This commit therefore retains the slice indexes as part of the key for
unknown keys - producing for the example above:
```
services.0.elb
services.1.elb
```
When copying a config module, make sure the full path for src and dst
files don't match, and also check the inode in case we resolved a
different path to the same file.
Make a note about the unsafe usage of reusing a tempDir path.
Escaped quotes are no longer supported as HIL syntax (as of the last
update to HIL), so this commit changes the Terraform config-layer test
to verify the non-presence of this behaviour for 0.7.
The `concat()` interpolation function does not yet support types other
than strings / lists of strings. Make it an error message instead of a
panic when a list of non-primitives is supplied.
Fixes the panic in #7030
Dot indexing worked in the "regexps and strings" world of 0.6.x, but it
no longer works on the 0.7 series w/ proper List / Map types.
There is plenty of dot-indexed config out in the wild, so we need to do
what we can to point users to the new syntax.
Here is one place we can do it for user variables (`var.somemap`). We'll
also need to address Resource Variables and Module Variables in a
separate PR.
This fixes the panic in #7103 - a proper error message is now returned.
This commit changes config parsing from weak decoding lists and maps
into []string and map[string]string respectively to decode into
[]interface{} and map[string]interface{} respectively. This is in order
to take advantage of the work integrated in #7082 to defeat the backward
compatibility features of the mapstructure library.
Test coverage of loading empty variables and validating their default
types against expectation.
The mapstructure library has a regrettable backward compatibility
concern whereby a WeakDecode of []interface{}{} into a target of
map[string]interface{} yields an empty map rather than an error. One
possibility is to switch to using Decode instead of WeakDecode, but this
loses the nice handling of type conversion, requiring a large volume of
code to be added to Terraform or HIL in order to retain that behaviour.
Instead we add a DecodeHook to our usage of the mapstructure library
which checks for decoding []interface{}{} or []string{} into a map and
returns an error instead.
This has the effect of defeating the code added to retain backwards
compatibility in mapstructure, giving us the correct (for our
circumstances) behaviour of Decode for empty structures and the type
conversion of WeakDecode.
The code is identical to that in the HIL library, and packaged into a
helper.
Fixes#4474, where lookup() calls fail out the entire interpolation when
the provided key value is not found in the map. This will allow using
coalesce() along with lookup() to greatly improve module flexibility.
Since the data resource lifecycle contains no steps to deal with tainted
instances, we must make sure that they never get created.
Doing this out in the command layer is not the best, but this is currently
the only layer that has enough information to make this decision and so
this simple solution was preferred over a more disruptive refactoring,
under the assumption that this taint functionality eventually gets
reworked in terms of StateFilter anyway.
This allows ${data.TYPE.NAME.FIELD} interpolation syntax at the
configuration level, though since there is no special handling of them
in the core package this currently just acts as an alias for
${TYPE.NAME.FIELD}.
This allows the config loader to read "data" blocks from the config and
turn them into DataSource objects.
This just reads the data from the config file. It doesn't validate the
data nor do anything useful with it.
Previously resources were assumed to always support the full set of
create, read, update and delete operations, and Terraform's resource
management lifecycle.
Data sources introduce a new kind of resource that only supports the
"read" operation. To support this, a new "Mode" field is added to
the Resource concept within the config layer, which can be set to
ManagedResourceMode (to indicate the only mode previously possible) or
DataResourceMode (to indicate that only "read" is supported).
To support both managed and data resources in the tests, the
stringification of resources in config_string.go is adjusted slightly
to use the Id() method rather than the unusual type[name] serialization
from before, causing a simple mechanical adjustment to the loader tests'
expected result strings.
This commit adds support for native list variables and outputs, building
up on the previous change to state. Interpolation functions now return
native lists in preference to StringList.
List variables are defined like this:
variable "test" {
# This can also be inferred
type = "list"
default = ["Hello", "World"]
}
output "test_out" {
value = "${var.a_list}"
}
This results in the following state:
```
...
"outputs": {
"test_out": [
"hello",
"world"
]
},
...
```
And the result of terraform output is as follows:
```
$ terraform output
test_out = [
hello
world
]
```
Using the output name, an xargs-friendly representation is output:
```
$ terraform output test_out
hello
world
```
The output command also supports indexing into the list (with
appropriate range checking and no wrapping):
```
$ terraform output test_out 1
world
```
Along with maps, list outputs from one module may be passed as variables
into another, removing the need for the `join(",", var.list_as_string)`
and `split(",", var.list_as_string)` which was previously necessary in
Terraform configuration.
This commit also updates the tests and implementations of built-in
interpolation functions to take and return native lists where
appropriate.
A backwards compatibility note: previously the concat interpolation
function was capable of concatenating either strings or lists. The
strings use case was deprectated a long time ago but still remained.
Because we cannot return `ast.TypeAny` from an interpolation function,
this use case is no longer supported for strings - `concat` is only
capable of concatenating lists. This should not be a huge issue - the
type checker picks up incorrect parameters, and the native HIL string
concatenation - or the `join` function - can be used to replicate the
missing behaviour.
This changes the representation of maps in the interpolator from the
dotted flatmap form of a string variable named "var.variablename.key"
per map element to use native HIL maps instead.
This involves porting some of the interpolation functions in order to
keep the tests green, and adding support for map outputs.
There is one backwards incompatibility: as a result of an implementation
detail of maps, one could access an indexed map variable using the
syntax "${var.variablename.key}".
This is no longer possible - instead HIL native syntax -
"${var.variablename["key"]}" must be used. This was previously
documented, (though not heavily used) so it must be noted as a backward
compatibility issue for Terraform 0.7.
* core: Add support for marking outputs as sensitive
This commit allows an output to be marked "sensitive", in which case the
value is redacted in the post-refresh and post-apply list of outputs.
For example, the configuration:
```
variable "input" {
default = "Hello world"
}
output "notsensitive" {
value = "${var.input}"
}
output "sensitive" {
sensitive = true
value = "${var.input}"
}
```
Would result in the output:
```
terraform apply
Apply complete! Resources: 0 added, 0 changed, 0 destroyed.
Outputs:
notsensitive = Hello world
sensitive = <sensitive>
```
The `terraform output` command continues to display the value as before.
Limitations: Note that sensitivity is not tracked internally, so if the
output is interpolated in another module into a resource, the value will
be displayed. The value is still present in the state.
hil.Eval() now returns (hil.EvaluationResult, error) instead of (value,
type, error). This commit updates the call sites, but retains all
previous behaviour. Tests are also updated.
These tests demonstrates a problem where the types to a module input are
not checked. For example, if a module - inner - defines a variable
"should_be_a_map" as a map, or with a default variable of map, we do not
fail if the user sets the variable value in the outer module to a string
value. This is also a problem in nested modules.
The implementation changes add a type checking step into the graph
evaluation process to ensure invalid types are not passed.
James Bardin