Commit Graph

248 Commits

Author SHA1 Message Date
Martin Atkins ef017345f1 configs/configupgrade: Upgrade the resource "lifecycle" nested block
The main tricky thing here is ignore_changes, which contains strings that
are better given as naked traversals in 0.12. We also handle here mapping
the old special case ["*"] value to the new "all" keyword.
2018-12-05 10:25:01 -08:00
Martin Atkins 4b52148262 configs/configupgrade: Upgrade provider addresses
Both resource blocks and module blocks contain references to providers
that are expressed as short-form provider addresses ("aws.foo" rather than
"provider.aws.foo").

These rules call for those to be unwrapped as naked identifiers during
upgrade, rather than appearing as quoted strings. This also introduces
some further rules for other simpler meta-arguments that are required
for the test fixtures for this feature.
2018-12-05 10:25:01 -08:00
Martin Atkins ea3b8b364c configs/configupgrade: Initial passthrough mapping for module blocks
Some further rules are required here to deal with the meta-arguments we
accept inside these blocks, but this is good enough to pass through most
module blocks using the standard attribute-expression-based mapping.
2018-12-05 10:25:01 -08:00
Martin Atkins 4b5d31d35d configs/configupgrade: Rules-based upgrade for "locals" block
Previously we were handling this one as a special case, effectively
duplicating most of the logic from upgradeBlockBody.

By doing some prior analysis of the block we can produce a "rules" that
just passes through all of the attributes as-is, allowing us to reuse
upgradeBlockBody. This is a little weird for the locals block since
everything in it is user-selected names, but this facility will also be
useful in a future commit for dealing with module blocks, which contain
a mixture of user-chosen and reserved argument names.
2018-12-05 10:25:01 -08:00
Martin Atkins 76221a3a4a configs/configupgrade: Retain any .tf.json files unchanged
We don't change JSON files at all and instead just emit a warning about
them since JSON files are usually generated rather than hand-written and
so any updates need to happen in the generator program rather than in its
output.

However, we do still need to copy them verbatim into the output map so
that we can keep track of them through any subsequent steps.
2018-12-04 11:37:39 -08:00
Martin Atkins 8490fc36f7 configs/configupgrade: Fix up references to counted/uncounted resources
Prior to v0.12 Terraform was liberal about these and allowed them to
mismatch, but now it's important to get this right so that resources
and resource instances can be used directly as object values, and so
we'll fix up any sloppy existing references so things keep working as
expected.

This is particularly important for the pattern of using count to create
conditional resources, since previously the "true" case would create one
instance and Terraform would accept an unindexed reference to that.
2018-12-04 11:37:39 -08:00
Martin Atkins ceedeb69a9 configs/configupgrade: Normalize and upgrade reference expressions
The reference syntax is not significantly changed, but there are some
minor additional restrictions on identifiers in HCL2 and as a special case
we need to rewrite references to data.terraform_remote_state .

Along with those mandatory upgrades, we will also switch references to
using normal index syntax where it's safe to do so, as part of
de-emphasizing the old strange integer attribute syntax (like foo.0.bar).
2018-12-04 11:37:39 -08:00
Martin Atkins e83976c008 configs/configupgrade: Print trailing comments inside blocks
Previously we were erroneously moving these out of their original block
into the surrounding body. Now we'll make sure to collect up any remaining
ad-hoc comments inside a nested block body before closing it.
2018-12-04 11:37:39 -08:00
Martin Atkins de0eb9ea30 configs/configupgrade: Distinguish data resources in analysis
Early on it looked like we wouldn't need to distinguish these since we
were only analyzing for provider types, but we're now leaning directly
on the resource addresses later on and so we need to make sure we produce
valid ones when data resources are present.
2018-12-04 11:37:39 -08:00
Martin Atkins 6596d031d9 configs/configupgrade: Convert block-as-attr to dynamic blocks
Users discovered that they could exploit some missing validation in
Terraform v0.11 and prior to treat block types as if they were attributes
and assign dynamic expressions to them, with some significant caveats and
gotchas resulting from the fact that this was never intended to work.

However, since such patterns are in use in the wild we'll convert them
to a dynamic block during upgrade. With only static analysis we must
unfortunately generate a very conservative, ugly dynamic block with
every possible argument set. Users ought to then clean up the generated
configuration after confirming which arguments are actually required.
2018-12-04 11:37:39 -08:00
Martin Atkins f96d702d4f configs/configupgrade: Upgrading of simple nested blocks 2018-12-04 11:37:39 -08:00
Martin Atkins 39c3e7112f configs/configupgrade: Use break to cancel default function rendering
We're using break elsewhere in here so it was weird to have a small set
of situations that return instead, which could then cause confusion for
future maintenance if a reader doesn't notice that control doesn't always
leave the outer switch statement.
2018-12-04 11:37:39 -08:00
Martin Atkins 48f1245e6b configs/configupgrade: Replace lookup(...) with index syntax
If lookup is being used with only two arguments then it is equivalent to
index syntax and more readable that way, so we'll replace it.

Ideally we'd do similarly for element(...) here but sadly we cannot
because we can't prove in static analysis that the user is not relying
on the modulo wraparound behavior of that function.
2018-12-04 11:37:39 -08:00
Martin Atkins 4927a4105b configs/configupgrade: Replace calls to list() and map()
We now have native language features for declaring tuples and objects,
which are the idiomatic way to construct sequence and mapping values that
can then be converted to list, set, and map types as needed.
2018-12-04 11:37:39 -08:00
Martin Atkins 8cf024d45a configs/configupgrade: Upgrade expressions nested in HCL list/object
In the old world, lists and maps could be created either using functions
in HIL or list/object constructs in HCL. Here we ensure that in the HCL
case we'll apply any required expression transformations to the individual
items within HCL's compound constructs.
2018-12-04 11:37:39 -08:00
Martin Atkins e49d993d89 configs/configupgrade: Decide on blank lines by ends of items
Previously we were using the line count difference between the start of
one item and the next to decide whether to insert a blank line between
two items, but that is incorrect for multi-line items.

Instead, we'll now count the difference from the final line of the
previous item to the first line of the next, as best we can with the
limited position info recorded by the HCL1 parser.
2018-12-04 11:37:39 -08:00
Martin Atkins bdb724562c configs/configupgrade: Test that map attrs as blocks are fixed
The old parser was forgiving in allowing the use of block syntax where a
map attribute was expected, but the new parser is not (in order to allow
for dynamic map keys, for expressions, etc) and so the upgrade tool must
fix these to use attribute syntax.
2018-12-04 11:37:39 -08:00
Martin Atkins 1aa368d0d8 configs/configupgrade: Add some logging and enable it for tests 2018-12-04 11:37:39 -08:00
Martin Atkins e8999eefdc configs/configupgrade: Populate the test provider schema
This will allow us to test some schema-sensitive migration rules.
2018-12-04 11:37:39 -08:00
Martin Atkins 8e594f32aa configs/configupgrade: Upgrade rules for the "terraform" block type
This includes the backend configuration, so we need to load the requested
backend and migrate the included configuration per that schema.
2018-12-04 11:37:39 -08:00
Martin Atkins 302b29557f configs/configupgrade: Pass through diagnostics from body upgrades 2018-12-04 11:37:39 -08:00
Martin Atkins c755745285 configs/configupgrade: Generalize migration of block bodies
The main area of interest in upgrading is dealing with special cases for
individual block items, so this generalization allows us to use the same
overall body-processing logic for everything but to specialize just how
individual items are dealt with, which we match by their names as given
in the original input source code.
2018-12-04 11:37:39 -08:00
Martin Atkins cf52e224f6 configs/configupgrade: Basic migration of provider blocks
This involved some refactoring of how block bodies are migrated, which
still needs some additional work to deal with meta-arguments but is now
at least partially generalized to support both resource and provider
blocks.
2018-12-04 11:37:39 -08:00
Radek Simko 9e5677adeb
Merge pull request #19453 from hashicorp/b-whole-body-diag-rendering
command/format: Fix rendering of attribute-agnostic diagnostics
2018-11-26 23:52:21 +00:00
Radek Simko 501fcd1e21
Fix tests after upgrading hcl 2018-11-26 23:38:37 +00:00
Martin Atkins bbbf22d8e4 configs/configschema: Block.StaticValidateTraversal method
This allows basic static validation of a traversal against a schema, to
verify that it represents a valid path through the structural parts of
the schema.

The main purpose of this is to produce better error messages (using our
knowledge of the schema) than we'd be able to achieve by just relying
on HCL expression evaluation errors. This is particularly important for
nested blocks because it may not be obvious whether one is represented
internally by a set or a list, and incorrect usage would otherwise produce
a confusing HCL-oriented error message.
2018-11-26 08:25:03 -08:00
Martin Atkins 0681935df5 configs: Reserve various names for future use
We want the forthcoming v0.12.0 release to be the last significant
breaking change to our main configuration constructs for a long time, but
not everything could be implemented in that release.

As a compromise then, we reserve various names we have some intent of
using in a future release so that such future uses will not be a further
breaking change later.

Some of these names are associated with specific short-term plans, while
others are reserved conservatively for possible later work and may be
"un-reserved" in a later release if we don't end up using them. The ones
that we expect to use in the near future were already being handled, so
we'll continue to decode them at the config layer but also produce an
error so that we don't get weird behavior downstream where the
corresponding features don't work yet.
2018-11-26 08:25:03 -08:00
James Bardin ebc9745788 fix "too many items" error message 2018-11-13 18:41:53 -05:00
Martin Atkins f001cb8654 command: Fix terraform init -from-module with relative paths
Since our new approach here works by installing with a synthetic module
configuration block, we need to treat relative paths as a special case
for two reasons:

- Relative paths in module addresses are relative to the file containing
  the call rather than the working directory, but -from-module uses the
  working directory (and the call is in a synthetic "file" anyway)

- We need to force Terraform to pass the path through to go-getter rather
  than just treating it as a relative reference, since we really do want
  a copy of the directory in this case, even if it is local.

To address both of these things, we'll detect a relative path and turn it
into an absolute path before beginning installation. This is a bit hacky,
but this is consistent with the general philosophy of the -from-module
implementation where it does hacky things so that the rest of the
installer code can be spared of dealing with its special cases.

This is covered by a couple of existing tests that run init -from-module,
including TestInit_fromModule_dstInSrc which now passes.
2018-11-09 09:48:03 -08:00
James Bardin b3a491d035 use correct block types in CoerceValue
When creating Null or Unknown values during CoerceValue, the the outer
block type was being used rather than the current block type.
2018-10-18 18:09:43 -04:00
Martin Atkins 1a654e9e1c configs/configupgrade: Disable the tests for now
The tests in here are illustrating that this package is not yet finished,
but we plan to run a release before we finish this and so we'll skip those
tests for now with the intent of reinstating this again once we return
to finish this up.
2018-10-16 19:14:11 -07:00
Martin Atkins 741d334ee4 command: Even more fixes for "apply" command tests 2018-10-16 19:14:11 -07:00
Martin Atkins 961056c08d configs/configupgrade: Use mock provider instead of test provider
The test provider comes with a lot of baggage since it's designed to be
used as a plugin, so instead we'll just use the mock provider
implementation directly, and so we can (in a later commit) configure it
appropriately for what our tests need here.
2018-10-16 19:14:11 -07:00
Martin Atkins 85aa8769db configs/configupgrade: Partially fix TestUpgradeValid
This is still not compileable because the test provider needs to be
updated to the new provider interface, but all the rest of the types are
now correct so we can update the test provider in a later commit to make
this work again.
2018-10-16 19:14:11 -07:00
Martin Atkins 7d0be84300 configload: Don't fail if one module is a child directory of another
Given a module foo and a module foo/bar, the previous code might
incorrectly treat "bar" as a file within "foo" rather than as a module
directory in its own right.
2018-10-16 19:14:11 -07:00
Martin Atkins 44bc7519a6 terraform: More wiring in of new provider types
This doesn't actually work yet, but it builds and then panics in a pretty
satisfying way.
2018-10-16 19:12:54 -07:00
Martin Atkins 549544f201 configschema: Handle nested blocks containing dynamic-typed attributes
We need to make the collection itself be a tuple or object rather than
list or map in this case, since otherwise all of the elements of the
collection are constrained to be of the same type and that isn't the
intent of a provider indicating that it accepts any type.
2018-10-16 19:11:09 -07:00
Martin Atkins 0317da9911 plans/objchange: logic for merging prior state with config
This produces a "proposed new state", which already has prior computed
values propagated into it (since that behavior is standard for all
resource types) but could be customized further by the provider to make
the "_planned_ new state".

In the process of implementing this it became clear that our configschema
DecoderSpec behavior is incorrect, since it's producing list values for
NestingList and map values for NestingMap. While that seems like it should
be right, we should actually be using tuple and object types respectively
to allow each block to have a different runtime type in situations where
an attribute is given the type cty.DynamicPseudoType. That's not fixed
here, and so without a further fix list and map blocks will panic here.
The DecoderSpec implementation will be fixed in a subsequent commit.
2018-10-16 19:11:09 -07:00
Martin Atkins a3403f2766 terraform: Ugly huge change to weave in new State and Plan types
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.

The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.

The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.

Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
2018-10-16 19:11:09 -07:00
Kristin Laemmert d1f27ce8c2 registry: renaming module-specific registry functions 2018-10-16 18:56:50 -07:00
James Bardin 8f295fcb22 CoerceValue should insert Null for unset attrs
This matches the decoder spec, where a value unset in the configuration
is always Null.
2018-10-16 18:53:51 -07:00
James Bardin 50e099ad10 don't set Unknown for computed values
Any value that is not set in the configuration should decode as a Null
value. Unknown should still be returned if a computed value expression
is unknown.
2018-10-16 18:53:51 -07:00
Martin Atkins d8bf3cc4e0 configschema: Fix ConfigSchema bugs with nested blocks
We were iterating over the wrong value to recursively coerce content for
nested blocks, and also incorrectly constructing the cty.Path used in
errors.
2018-10-16 18:53:51 -07:00
Martin Atkins 479c6b2466 move "configschema" from "config" to "configs"
The "config" package is no longer used and will be removed as part
of the 0.12 release cleanup. Since configschema is part of the
"new world" of configuration modelling, it makes more sense for
it to live as a subdirectory of the newer "configs" package.
2018-10-16 18:50:29 -07:00
Martin Atkins adb88eaa16 configupgrade: Analysis of input configuration
In order to properly migrate the contents of resource, data, provider and
provisioner blocks we will need the provider's schema in order to
understand what is expected, so we can resolve some ambiguities inherent
in the legacy HCL AST.

This includes an initial prototype of migrating the content of resource
blocks just to verify that the information is being gathered correctly.
As with the rest of the upgrade_native.go file, this will be reorganized
significantly once the basic end-to-end flow is established and we can
see how to organize this code better.
2018-10-16 18:50:29 -07:00
Martin Atkins f77e7a61b0 various: helpers for collecting necessary provider types
Since schemas are required to interpret provider, resource, and
provisioner attributes in configs, states, and plans, these helpers intend
to make it easier to gather up the the necessary provider types in order
to preload all of the needed schemas before beginning further processing.

Config.ProviderTypes returns directly the list of provider types, since
at this level further detail is not useful: we've not yet run the
provider allocation algorithm, and so the only thing we can reliably
extract here is provider types themselves.

State.ProviderAddrs and Plan.ProviderAddrs each return a list of
absolute provider addresses, which can then be turned into a list of
provider types using the new helper providers.AddressedTypesAbs.

Since we're already using configs.Config throughout core, this also
updates the terraform.LoadSchemas helper to use Config.ProviderTypes
to find the necessary providers, rather than implementing its own
discovery logic. states.State is not yet plumbed in, so we cannot yet
use State.ProviderAddrs to deal with the state but there's a TODO comment
to remind us to update that in a later commit when we swap out
terraform.State for states.State.

A later commit will probably refactor this further so that we can easily
obtain schema for the providers needed to interpret a plan too, but that
is deferred here because further work is required to make core work with
the new plan types first. At that point, terraform.LoadSchemas may become
providers.LoadSchemas with a different interface that just accepts lists
of provider and provisioner names that have been gathered by the caller
using these new helpers.
2018-10-16 18:50:29 -07:00
Martin Atkins ffe5f7c4e6 command: 0.12upgrade command
This is the frontend to the work-in-progress codepath for upgrading the
source code for a module written for Terraform v0.11 or earlier to use
the new syntax and idiom of v0.12.

The underlying upgrade code is not yet complete as of this commit, and
so the command is not yet very useful. We will continue to iterate on
the upgrade code in subsequent commits.
2018-10-16 18:50:29 -07:00
Martin Atkins 95b7b883a3 configupgrade: Basic expression formatting
This covers all of the expression node types in HIL's AST, and also
includes initial support for some of our top-level blocks so that we can
easily test that.

The initial implementations of the "variable" and "output" blocks are
pretty redundant and messy, so we can hopefully improve on these in a
later pass.
2018-10-16 18:50:29 -07:00
Martin Atkins a345533573 configupgrade: Beginnings of Upgrade function
This function is the main functionality of this package. So far it just
deals with detecting and renaming JSON files that are mislabeled as
native syntax files. Other functionality will follow in later commits.
2018-10-16 18:50:29 -07:00
Martin Atkins 1132898fbc configupgrade: Load source code for a module and detect already upgraded
This package will do all of its work in-memory so that it can avoid making
partial updates and then failing, so we need to be able to load the
sources files from a particular directory into memory.

The upgrade process isn't idempotent, so we also attempt to detect
heuristically whether an upgrade has already been performed (can parse
with the new parser and has a version constraint that prevents versions
earlier than 0.12) so that the CLI tool that will eventually wrap this
will be able to produce a warning and prompt for confirmation in that
case.
2018-10-16 18:50:29 -07:00
Martin Atkins 2f85b47586 configupgrade: new package for upgrading configs for 0.12
Although the new HCL implementation and configuration loader is broadly
compatible with the prior implementation, it has a number of new idiomatic
forms and it also cannot parse some more extreme non-idiomatic usages
that were possible under the old parser.

To help users migrate to the new implementation, this package will rewrite
configuration to comply with the new idiom and fix as many cases as
possible where the legacy parser was too liberal or exposed implementation
details.
2018-10-16 18:50:29 -07:00
Martin Atkins fc0e28b2b4 configload: Don't download the same module source multiple times
It is common for the same module source package to be referenced multiple
times in the same configuration, either because there are literally
multiple instances of the same module source or because a single package
(or repository) contains multiple modules in sub-directories and many
of them are referenced.

To optimize this, here we introduce a simple caching behavior where the
module installer will detect if it's asked to install multiple times from
the same source and produce the second and subsequent directories by
copying the first, rather than by downloading again over the network.

This optimization is applied once all of the go-getter detection has
completed and sub-directory portions have been trimmed, so it is also
able to normalize differently-specified source addresses that all
ultimately detect to the same resolved address. When installing, we
always extract the entire specified package (or repository) and then
reference the specified sub-directory, so we can safely re-use existing
directories when the base package is the same, even if the sub-directory
is different.

However, as a result we do not yet address the fact that the same package
will be stored multiple times _on disk_, which may still be problematic
when referencing large repositories multiple times in
disk-storage-constrained environments. We could address this in a
subsequent change by investigating the use of symlinks where possible.

Since the Registry installer is implemented just as an extra resolution
step in front of go-getter, this optimization applies to registry
modules too. This does not apply to local relative references, which will
continue to just resolve into the already-prepared directory of their
parent module.

The cache of previously installed paths lives only for the duration of
one call to InstallModules, so we will never re-use directories that
were created by previous runs of "terraform init" and there is no risk
that older versions will pollute the cache when attempting an upgrade
from a source address that doesn't explicitly specify a version.

No additional tests are added here because the existing module installer
tests (when TF_ACC=1) already cover the case of installing multiple
modules from the same source.
2018-10-16 18:50:29 -07:00
Martin Atkins eb7aaf2414 configload: Configuration snapshots
Here we introduce a new idea of a "configuration snapshot", which is an
in-memory copy of the source code of each of the files that make up
the configuration. The primary intended purpose for this is as an
intermediate step before writing the configuration files into a plan file,
and then reading them out when that plan file is later applied.

During earlier configs package development we expected to use an afero vfs
implementation to read directly from the zip file, but that doesn't work
in practice because we need to preserve module paths from the source file
system that might include parent directory traversals (../) while
retaining the original path for use in error messages.

The result, for now, is a bit of an abstraction inversion: we implement
a specialized afero vfs implementation that makes the sparse filesystem
representation from a snapshot appear like a normal filesystem just well
enough that the config loader and parser can work with it.

In future we may wish to rework the internals here so that the main
abstraction is at a similar level to the snapshot and then that API is
mapped to the native filesystem in the normal case, removing afero. For
now though, this approach avoids the need for a significant redesign
of the parser/loader internals, at the expense of some trickiness in the
case where we're reading from a snapshot.

This commit does not yet include the reading and writing of snapshots into
plan files. That will follow in a subsequent commit.
2018-10-16 18:50:29 -07:00
James Bardin e0e177374f don't hanlde "type" when parsing connection blocks
There's no provisioner schema yet, and we need to handle the type
dynamically during evaluation.
2018-10-16 18:49:20 -07:00
Martin Atkins 1f859ba8d4 configs: Handle object constructor keys when shimming traversals
This is important in particular for shimming the "providers" map in module
blocks:

    providers = {
        "aws" = "aws.foo"
    }

We call this shim for both the key and the value here, and the value would
previously have worked. However, the key is wrapped up by the parser in
an ObjectConsKeyExpr container, which deals with the fact that in normal
use an object constructor key that is just a bare identifier is actually
interpreted as a string. We don't care about that interpretation for our
shimming purposes, and so we can just unwrap it here.
2018-10-16 18:49:20 -07:00
Martin Atkins c4fac74371 configs: Fix crasher in provider configuration reference parsing
Due to a logic error, this would panic if given an empty traversal.
2018-10-16 18:46:46 -07:00
Martin Atkins cd584309b9 configs: Fix typo in the deprecation warning about ignore_changes = ["*"] 2018-10-16 18:46:46 -07:00
Martin Atkins 5cf791861f configs: Allow looking up resources by resource addresses.
Throughout the main "terraform" package we identify resources using the
address types, and so this helper is useful to make concise transitions
between the address types and the configuration types.

As part of this, we use the address types to produce the keys used in our
resource maps. This has no visible change in behavior since the prior
implementation produced an equal result, but this change ensures that
ResourceByAddr cannot be broken by hypothetical future changes to the
key serialization.
2018-10-16 18:46:46 -07:00
Martin Atkins 70f1635416 configs: record the source directory for modules
We can only do this when modules are loaded with Parser.LoadConfigDir,
but in practice this is the common case anyway.

This is important to support the path.module and path.root expressions in
configuration.
2018-10-16 18:46:46 -07:00
Martin Atkins fa2a76fa23 configs: use addrs.Module for module path, rather than []string
addrs.Module is itself internally just []string, but this better
communicates our intent here and makes this integrate better with other
code which is using this type for this purposes.
2018-10-16 18:46:46 -07:00
Martin Atkins 24dce0c624 configs: Helper methods to integrate with "addrs" package
Our new "addrs" package gives us some nice representations of various
kinds of "address" within Terraform. To talk to APIs that use these, it's
convenient to be able to easily derive such addresses from the
configuration objects.

These new methods, along with a recasting of the existing
Resource.ProviderConfigKey method to Resource.ProviderConfigAddr, give us
some key integration points to support the configuration graph transforms
in the main "terraform" package.
2018-10-16 18:44:26 -07:00
Martin Atkins b6fdd0446e configs: parse the "providers" map for module calls
This was accidentally missed on the first pass of module call decoding.
As before, this is a map from child provider config address to parent
provider config address, allowing the set of providers to be projected in
arbitrary ways into a child module.
2018-10-16 18:44:26 -07:00
Martin Atkins dd62cd97c9 configs: DisabledModuleWalker
This is a built-in implementation of ModuleWalker that just returns an
error any time it's asked for a module. This is intended for simple unit
tests where no child modules are needed anyway.
2018-10-16 18:44:26 -07:00
Martin Atkins 2eba023537 configs: NewEmptyConfig function
This is useful for creating a valid placeholder configuration, but not
much else. Most callers should use BuildConfig to build a configuration
that actually has something in it.
2018-10-16 18:44:26 -07:00
Martin Atkins c07b0a7806 configs: Re-unify the ManagedResource and DataResource types
Initially the intent here was to tease these apart a little more since
they don't really share much behavior in common in core, but in practice
it'll take a lot of refactoring to tease apart these assumptions in core
right now and so we'll keep these things unified at the configuration
layer in the interests of minimizing disruption at the core layer.

The two types are still kept in separate maps to help reinforce the fact
that they are separate concepts with some behaviors in common, rather than
the same concept.
2018-10-16 18:44:26 -07:00
Martin Atkins cd51864d84 configs: Start using the new "addrs" package types for modules
We initially just mimicked our old practice of using []string for module
paths here, but the addrs package now gives us a pair of types that better
capture the two different kinds of module addresses we are dealing with:
static addresses (nodes in the configuration tree) and dynamic/instance
addresses (which can represent the situation where multiple instances are
created from a single module call).

This distinction still remains rather artificial since we don't yet have
support for count or for_each on module calls, but this is intended to lay
the foundations for that to be added later, and in the mean time just
gives us some handy helper functions for parsing and formatting these
address types.
2018-10-16 18:44:26 -07:00
Martin Atkins 4ed06a9227 terraform: HCL2-flavored module dependency resolver
For the moment this is just a lightly-adapted copy of
ModuleTreeDependencies named ConfigTreeDependencies, with the goal that
the two can live concurrently for the moment while not all callers are yet
updated and then we can drop ModuleTreeDependencies and its helper
functions altogether in a later commit.

This can then be used to make "terraform init" and "terraform providers"
work properly with the HCL2-powered configuration loader.
2018-10-16 18:44:26 -07:00
Martin Atkins ebafa51723 command: Various updates for the new backend package API
This is a rather-messy, complex change to get the "command" package
building again against the new backend API that was updated for
the new configuration loader.

A lot of this is mechanical rewriting to the new API, but
meta_config.go and meta_backend.go in particular saw some major
changes to interface with the new loader APIs and to deal with
the change in order of steps in the backend API.
2018-10-16 18:44:26 -07:00
Martin Atkins 591aaf1e6a configload: helper functions for tests
These utility functions are intended to allow concisely loading a
configuration from a fixture directory in a test, bailing out early if
there are any unexpected errors.
2018-10-16 18:24:47 -07:00
Martin Atkins 6cf9346dfd configs/configload: Helper for recognizing a config dir (or not)
This is just a small wrapper around the parser's IsConfigDir method, for
convenience and for law of demeter.
2018-10-16 18:24:47 -07:00
Martin Atkins 5dd6b839d0 configs: Export MergeBodies and new SynthBody function
We have a few special use-cases in Terraform where an object is
constructed from a mixture of different sources, such as a configuration
file, command line arguments, and environment variables.

To represent this within the HCL model, we introduce a new "synthetic"
HCL body type that just represents a map of values that are interpreted
as attributes.

We then export the previously-private MergeBodies function to allow the
synthetic body to be used as an override for a "real" body, which then
allows us to combine these various sources together while still retaining
the proper source location information for each individual attribute.

Since a synthetic body doesn't actually exist in configuration, it does
not produce source locations that can be turned into source snippets but
we can still use placeholder strings to help the user to understand
which of the many different sources a particular value came from.
2018-10-16 18:24:47 -07:00
Sander van Harmelen 179b32d426 Add a `CredentialsForHost` method to disco.Disco
By adding this method you now only have to pass a `*disco.Disco` object around in order to do discovery and use any configured credentials for the discovered hosts.

Of course you can also still pass around both a `*disco.Disco` and a `auth.CredentialsSource` object if there is a need or a reason for that!
2018-08-03 11:29:11 +02:00
Martin Atkins 5661ab5991 configs: allow full type constraints for variables
Previously we just ported over the simple "string", "list", and "map" type
hint keywords from the old loader, which exist primarily as hints to the
CLI for whether to treat -var=... arguments and environment variables as
literal strings or as HCL expressions.

However, we've been requested before to allow more specific constraints
here because it's generally better UX for a type error to be detected
within an expression in a calling "module" block rather than at some point
deep inside a third-party module.

To allow for more specific constraints, here we use the type constraint
expression syntax defined as an extension within HCL, which uses the
variable and function call syntaxes to represent types rather than values,
like this:
 - string
 - number
 - bool
 - list(string)
 - list(any)
 - list(map(string))
 - object({id=string,name=string})

In native HCL syntax this looks like:

    variable "foo" {
      type = map(string)
    }

In JSON, this looks like:

    {
      "variable": {
        "foo": {
          "type": "map(string)"
        }
      }
    }

The selection of literal processing or HCL parsing of CLI-set values is
now explicit in the model and separate from the type, though it's still
derived from the type constraint and thus not directly controllable in
configuration.

Since this syntax is more complex than the keywords that replaced it, for
now the simpler keywords are still supported and "list" and "map" are
interpreted as list(any) and map(any) respectively, mimicking how they
were interpreted by Terraform 0.11 and earlier. For the time being our
documentation should continue to recommend these shorthand versions until
we gain more experience with the more-specific type constraints; most
users should just make use of the additional primitive type constraints
this enables: bool and number.

As a result of these more-complete type constraints, we can now type-check
the default value at config load time, which has the nice side-effect of
allowing us to produce a tailored error message if an override file
produces an invalid situation; previously the result was rather confusing
because the error message referred to the original definition of the
variable and not the overridden parts.
2018-03-08 16:23:35 -08:00
Martin Atkins c05a1050fc configs: Disable deprecation warning for quoted keywords/references
Although we do still consider these deprecated for 0.12, we'll defer
actually generating warnings for them until a later minor release so that
module authors can retain their quoted identifiers for a period after 0.12
release for backward-compatibility with Terraform 0.11.
2018-03-08 15:42:47 -08:00
Martin Atkins a26ff56f01 configs: highlight resource name in diags when invalid
Previously we were erroneously highlighting the resource type name instead.
2018-03-08 15:41:19 -08:00
Martin Atkins 7549ce15f0 configs: update values file invalid syntax test for new HCL behavior
The error-handling behavior of the HCL parser was improved, which causes
the number of diagnostics and the diagnostics messages to be different
in cases where a block-like introduction is given but without any
following body.
2018-03-08 11:17:39 -08:00
Martin Atkins 4fa8c16ead configs: support ignore_changes wildcards
The initial pass of implementation here missed the special case where
ignore_changes can, in the old parser, be set to ["*"] to ignore changes
to all attributes.

Since that syntax is awkward and non-obvious, our new decoder will instead
expect ignore_changes = all, using HCL2's capability to interpret an
expression as a literal keyword. For compatibility with old configurations
we will still accept the ["*"] form but emit a deprecation warning to
encourage moving to the new form.
2018-02-15 15:56:39 -08:00
Martin Atkins c5f5340b15 configs: Additional guidance in doc.go
There's quite a lot in this package, so hopefully this additional
paragraph will help readers get oriented.
2018-02-15 15:56:39 -08:00
Martin Atkins 36fb5b52e7 configs: quoted keywords/references are warnings, not errors
In our new loader we are changing certain values in configuration to be
naked keywords or references rather than quoted strings as before. Since
many of these have been shown in books, tutorials, and our own
documentation we will make the old forms generate deprecation warnings
rather than errors so that newcomers starting from older documentation
can be eased into the new syntax, rather than getting blocked.

This will also avoid creating a hard compatibility wall for reusable
modules that are already published, allowing them to still be used in
spite of these warnings and then fixed when the maintainer is able.
2018-02-15 15:56:39 -08:00
Martin Atkins ea868026b8 configs/configload: installer tests inspect their result
Previously we were just loading the module and asserting no diagnostics,
but that is not really good enough since if we install modules incorrectly
it's possible that we are still able to load an empty configuration
successfully.

Now we'll do some basic inspecetion of the module tree that results from
loading what we installed, to ensure that all of the expected modules
are present at the right locations in the tree.
2018-02-15 15:56:39 -08:00
Martin Atkins d859bacbdd configs/configload: InitDirFromModule
This will provide the functionality of "terraform init -from-module=...",
which uses the contents of a given module to populate the working
directory.

This mechanism is intended for installing e.g. examples from Terraform
Registry or elsewhere. It's not fully-general since it can't reasonably
install a module from a subdir that refers up to a parent directory, but
that isn't an issue for all reasonable uses of this option.
2018-02-15 15:56:39 -08:00
Martin Atkins 74afcb4a7f configs/configload: some loaders can't install modules
Originally the hope was to use the afero filesystem abstraction for all
loader operations, but since we install modules using go-getter we cannot
(without a lot of refactoring) support vfs for installation.

The vfs use-case is for reading configuration from plan zip files anyway,
and so we have no real reason to support installation into a vfs. For now
at least we will just add the possibility that a loader might not be
install-capable. At the moment we have no non-install-capable loaders, but
we'll add one later once we get to loading configuration from plan files.
2018-02-15 15:56:39 -08:00
Martin Atkins 59939cf320 configs/configload: installation from registry and go-getter
Unlike the old installer in config/module, this uses new-style
installation directories that include the static module path so that paths
we show in diagnostics will be more meaningful to the user.

As before, we retrieve the entire "package" associated with the given
source string, rather than any given subdirectory directly, because the
retrieved module may contain ../ references into parent directories which
must be resolvable after extraction.
2018-02-15 15:56:39 -08:00
Martin Atkins 3d551e25e0 configs: BuildConfig sorts child modules by name
This is not strictly necessary, but since this is not a
performance-critical codepath we'll do this because it makes life easier
for callers that want to print out user-facing logs about build process,
or who are logging actions taken as part of a unit test.
2018-02-15 15:56:38 -08:00
Martin Atkins 7feef98517 configs/configload: installation of local modules
Enough of the InstallModules method to install local modules (those with
relative paths). "Install" is actually a bit of an exaggeration for these
since we actually just record them in our manifest after verifying that
the source directory exists.

This is a change of behavior relative to the old module installer since
we no longer create a symlink to the module directory inside the
.terraform/modules directory. Instead, we record the module's true
location in our manifest so that the loader will find it later.

The use of a symlink here predated the manifest file. Now that we have a
manifest file the symlinks are redundant. Using the "natural" location of
the module leads to more helpful error messages, since we'll refer to
the module path as the user expects it, rather than to an internal alias.
2018-02-15 15:56:38 -08:00
Martin Atkins 72ad927c4d configs/configload: package for loading configurations
Previously the behavior for loading and installing modules was included in
the same package as the representation of the module tree (in the
config/module package).

In our new world, the model of a module tree (now called a "Config") is
included in "configs" along with the Module and File structs. This new
package replaces the loading and installation functionality previously
in config/module with new equivalents that work with the model objects
in "configs".

As of this commit, only the loading functionality is implemented. The
installation functionality will follow in subsequent commits.
2018-02-15 15:56:38 -08:00
Martin Atkins 9153bb448e configs: include the module call source range in our module tree 2018-02-15 15:56:38 -08:00
Martin Atkins 8929eca405 configs: BuildConfig function
BuildConfig creates a module tree by recursively walking through module
calls in the root module and any descendent modules. This is intended to
be used both for the simple case of loading already-installed modules and
the more complex case of installing modules inside "terraform init", both
of which will be dealt with in a separate package.
2018-02-15 15:56:38 -08:00
Martin Atkins cc38e91612 configs: Implementation of mergeBody
mergeBody is a hcl.Body implementation that deals with our override file
merging behavior for the portions of the configuration that are not
processed until full eval time.

Mimicking the behavior of our old config merge implementation from the
"config" package, the rules here are:

- Attributes in the override body hide attributes of the same name in
  the base body.
- Any block in the override body hides all blocks with the same type name
  that appear in the base body.

This is tested by a new test for the overriding of module arguments, which
asserts the correct behavior of the merged body as part of its work.
2018-02-15 15:56:38 -08:00
Martin Atkins 7c8efe103e configs: allow overrides files to omit args that primary files can't
Some of the fields in our config structs are either mandatory in primary
files or there is a default value that we apply if absent.

Unfortunately override files impose the additional constraint that we
be allowed to omit required fields (which have presumably already been
set in the primary files) and that we are able to distinguish between a
default value and omitting a value entirely.

Since most of our fields were already acceptable for override files, here
we just add some new fields to deal with the few cases where special
handling is required and a helper function to disable the "Required" flag
on attributes in a given schema.
2018-02-15 15:56:38 -08:00
Martin Atkins 4e5efa498a configs: Parser.LoadConfigDir
This method wraps LoadConfigFile to load all of the .tf and .tf.json files
in a given directory and then bundle them together into a Module object.

This function also deals with the distinction between primary and override
files, first appending together the primary files in lexicographic order
by filename, and then merging in override files in the same order.

The merging behavior is not fully implemented as of this commit, and so
will be expanded in future commits.
2018-02-15 15:56:37 -08:00
Martin Atkins 9be399d49c configs: Another simple test for _invalid_ config files
Much like TestParserLoadConfigFileSuccess, this is intended to be an
easy-to-maintain collection of bad examples to test different permutations
of our error handling.

As with TestParserLoadConfigFileSuccess, we should also have more specific
tests alongside this that check that the error outcome is what was
expected, since this test just accepts any error and may thus not be
testing what we think it is.
2018-02-15 15:56:37 -08:00
Martin Atkins e524d1eb95 configs: Simple test of loading valid configuration files
This test is intended to be an easy-to-maintain catalog of good examples
that we can use to catch certain parsing or decoding regressions easily.

It's not a fully-comprehensive test since it doesn't check the result
of decoding, instead just accepting any decode that completes without
errors. However, an easy-to-maintain test like this is a good complement
to some more specialized tests since we can easily collect good examples
over time and just add them in here.
2018-02-15 15:56:37 -08:00
Martin Atkins e15ec486bf configs: Parser.LoadConfigFile
This is a first pass of decoding of the main Terraform configuration file
format. It hasn't yet been tested with any real-world configurations, so
it will need to be revised further as we test it more thoroughly.
2018-02-15 15:56:37 -08:00
Martin Atkins 13fa73c63e configs: stub out main configuration structs
These types represent the individual elements within configuration, the
modules a configuration is made of, and the configuration (static module
tree) itself.
2018-02-15 15:56:37 -08:00
Martin Atkins 05e3b47ba1 configs: Parser.LoadValuesFile
This method loads a "values file" -- also known as a "tfvars file" -- and
returns the values found inside.

A values file is an HCL file (in either native or JSON syntax) whose
top-level body is treated as a set of arbitrary key/value pairs whose
values may not depend on any variables or functions.

We will load values files through a configs.Parser -- even though values
files are not strictly-speaking part of configuration -- because this
causes them to be registered in our source code cache so that we can
generate source code snippets if we need to report any diagnostics.
2018-02-15 15:56:37 -08:00
Martin Atkins a0f4a313ef configs: Parser type
configs.Parser is the entry-point for this package, providing functions to
load and parse HCL-based configuration files.

We use the library "afero" to decouple the parser from the physical OS
filesystem, which here allows us to easily use an in-memory filesystem
for testing and will, in future, allow us to read files from more unusual
places, such as configuration embedded in a plan file.
2018-02-15 15:56:36 -08:00
Martin Atkins 7987a2fdb2 configs: new package for HCL2-based configuration
There's a lot of complexity in our existing "config" package that results
from our approach to handling configuration with HCL and HIL. A lot of
that functionality is no longer needed -- or must work in a significantly
different way -- for HCL2.

The new package "configs", which is named following the convention of some
Go standard library packages like "strings", is a re-imagination of some
of the functionality from the "config" package for an HCL2-only world.

The scope of this package will be slightly smaller than "config", since
it only deals with config loading and not with expression evaluation.
Another package "lang" (mentioned in the docstring here but not yet added)
will deal with the more dynamic portions of of configuration handling,
including populating an hcl.EvalContext to evaluate expressions.
2018-02-15 15:10:01 -08:00