We need to share a single config loader across all callers because that
allows us to maintain the source code cache we'll use for snippets in
error messages.
Nothing calls this yet. Callers will be gradually updated away from Module
and Config in subsequent commits.
If we get a diagnostic message that references a source range, and if the
source code for the referenced file is available, we'll show a snippet of
the source code with the source range highlighted.
At the moment we have no cache of source code, so in practice this
codepath can never be visited. Callers to format.Diagnostic will be
gradually updated in subsequent commits.
By adding this method you now only have to pass a `*disco.Disco` object around in order to do discovery and use any configured credentials for the discovered hosts.
Of course you can also still pass around both a `*disco.Disco` and a `auth.CredentialsSource` object if there is a need or a reason for that!
There's no point in trying to track these, they're lost after each test.
Kill them after a short delay so we don't have goroutines from every single
command test to wade through if we have a stack dump.
Only check for input twice in the meta.confirm method. This prevents an
errant newline from aborting the run while allowing Terraform to exit if
there is no input available. We don't just check for a tty, since we
still rely on being able to pipe input in for testing.
Remove the redundant confirmation loops in the migration code, and only
use the confirm method.
Now that the local backend can be cancelled during plan and refresh, we
don't really need the testShutdownHook. Simplify the tests by just
checking for Stop being called on the provider.
Add a shutdown hook to verify that a context has been correctly
cancelled, so we can remove the sleep and stop guessing.
Add a plan version of the shutdown test as well.
There was no cancellation context for a plan, so it would always have to
run to completion as SIGINT was being swallowed.
Move the shutdown channel to the command Meta since it's used in
multiple commands.
This allows the user to customize the location where Terraform stores
the files normally placed in the ".terraform" subdirectory, if e.g. the
current working directory is not writable.
Update the command package to use the new module storage. Move the old
command output strings into the module storage itself. This could be
moved back later either by using ui callbacks, or designing a module
storage interface once we know what the final requirements will look
like.
The command package is the main place we need access to these, so that
we can use them during init (to install packages, for example) and so that
we can use them to configure remote backends.
For the moment we're just providing an empty credentials object, which
will start to include both statically-configured and
helper-program-provided credentials sources in subsequent commits.
This new method showDiagnostics takes any value that would be accepted by
tfdiags.Append and renders it to the UI.
This is intended to encourage consistent handling of the different kinds
of errors and diagnostics that can be produced, and allow richer error
objects like the HCL2 diagnostics to be easily unwrapped and shown in
their full-fidelity.
This new option allows importing without configuration present.
Configuration is required by default as a confirmation that the provided resource name is correct, but it can be useful to override this in tools that wrap Terraform to do more involved operations.
In #15884 we adjusted the plan output to give an explicit command to run
to apply a plan, whereas before this command was just alluded to in the
prose.
Since releasing that, we've got good feedback that it's confusing to
include such instructions when Terraform is running in a workflow
automation tool, because such tools usually abstract away exactly what
commands are run and require users to take different actions to
proceed through the workflow.
To accommodate such environments while retaining helpful messages for
normal CLI usage, here we introduce a new environment variable
TF_IN_AUTOMATION which, when set to a non-empty value, is a hint to
Terraform that it isn't being run in an interactive command shell and
it should thus tone down the "next steps" messaging.
The documentation for this setting is included as part of the "...in
automation" guide since it's not generally useful in other cases. We also
intentionally disclaim comprehensive support for this since we want to
avoid creating an extreme number of "if running in automation..."
codepaths that would increase the testing matrix and hurt maintainability.
The focus is specifically on the output of the three commands we give in
the automation guide, which at present means the following two situations:
* "terraform init" does not include the final paragraphs that suggest
running "terraform plan" and tell you in what situations you might need
to re-run "terraform init".
* "terraform plan" does not include the final paragraphs that either
warn about not specifying "-out=..." or instruct to run
"terraform apply" with the generated plan file.
Meta.process was relying on the system readdir to order the arguments,
but readdir doesn't guarantee any ordering. Read the directory contents
as a whole and sort them in place before adding the tfvars files.
Skips checksum validation if the `TF_SKIP_PROVIDER_VERIFY` environment variable is set. Undocumented variable, as the primary goal is to significantly improve the local provider development workflow.
The "confirm" method was directly checking the meta struct's input field,
but that only represents the -input command line flag, and doesn't
respect the TF_INPUT environment variable.
By calling the Input method instead, we check both.
This fixes#15338.
Now that init can take a directory for configuration, the old behavior
of writing the .terraform data directory into the target path no longer
makes sense. Don't change the dataDir field during init, and write to
the default location.
Clean up all references to Meta.dataDir, and only use the getter method
in case we chose to dynamically override this at some point.
We're shifting terminology from "environment" to "workspace". This takes
care of some of the main internal API surface that was using the old
terminology, though is not intended to be entirely comprehensive and is
mainly just to minimize the amount of confusion for maintainers as we
continue moving towards eliminating the old terminology.
Feedback after 0.9 was that the term "environment" was confusing due to
it colliding with several other concepts, such as OS environment
variables, a non-aligned Terraform Enterprise concept, and differing ideas
of "environment" within various organizations.
This new term "workspace" is intended to ease some of that confusion. This
term is not used anywhere else in Terraform today, and we expect it to not
be used in a manner that would be confusing within user organizations.
This begins a deprecation cycle for the "terraform env" family of commands,
instead moving to an equivalent set of "terraform workspace" commands.
There are some remaining references to the old "environment" concept in
the code, which will be cleaned up in a separate change. This change is
instead focused on text visible in the UI and wording within code comments
for the benefit of human maintainers of the code.
This allows you to run multiple concurrent terraform operations against
different environments from the same source directory.
Fixes#14447.
Also removes some dead code which appears to do the same thing as the function I
modified.
This was added with the idea of using it to override the SHA256 hashes
to match those hypothetically stored in a plan, but we already have a
mechanism elsewhere for populating context fields from plan fields, so
this is not actually necessary.
By reading our lock file and passing this into the context, we ensure that
only the plugins referenced in the lock file can be used. As of this
commit there is no way to create that lock file, but that will follow soon
as part of "terraform init".
We also provide a way to force a particular set of SHA256s. The main use
for this is to allow us to persist a set of plugins in the plan and
check the same plugins are used during apply, but it may also be useful
for automated tests.
Previously the set of providers was fixed early on in the command package
processing. In order to be version-aware we need to defer this work until
later, so this interface exists so we can hold on to the possibly-many
versions of plugins we have available and then later, once we've finished
determining the provider dependencies, select the appropriate version of
each provider to produce the final set of providers to use.
This commit establishes the use of this new mechanism, and thus populates
the provider factory map with only the providers that result from the
dependency resolution process.
This disables support for internal provider plugins, though the
mechanisms for building and launching these are still here vestigially,
to be cleaned up in a subsequent commit.
This also adds a new awkward quirk to the "terraform import" workflow
where one can't import a resource from a provider that isn't already
mentioned (implicitly or explicitly) in config. We will do some UX work
in subsequent commits to make this behavior better.
This breaks many tests due to the change in interface, but to keep this
particular diff reasonably easy to read the test fixes are split into
a separate commit.
Previously we did plugin discovery in the main package, but as we move
towards versioned plugins we need more information available in order to
resolve plugins, so we move this responsibility into the command package
itself.
For the moment this is just preserving the existing behavior as long as
there are only internal and unversioned plugins present. This is the
final state for provisioners in 0.10, since we don't want to support
versioned provisioners yet. For providers this is just a checkpoint along
the way, since further work is required to apply version constraints from
configuration and support additional plugin search directories.
The automatic plugin discovery behavior is not desirable for tests because
we want to mock the plugins there, so we add a new backdoor for the tests
to use to skip the plugin discovery and just provide their own mock
implementations. Most of this diff is thus noisy rework of the tests to
use this new mechanism.
The reconfigure flag will force init to ignore any saved backend state.
This is useful when a user does not want any backend migration to
happen, or if the saved configuration can't be loaded at all for some
reason.
Add fields required to create an appropriate context for all calls to
clistate.Lock.
Add missing checks for Meta.stateLock, where we would attempt to lock,
even if locking should be skipped.
The `-force-copy` option will suppress confirmation for copying state
data.
Modify some tests to use the option, making sure to leave coverage of
the Input code path.
Add Env and SetEnv methods to command.Meta to retrieve the current
environment name inside any command.
Make sure all calls to Backend.State contain an environment name, and
make the package compile against the update backend package.
Martin Atkins