The responsibility for actually instantiating a single plugin and reading
out its schema now belongs to the contextPlugins type, which memoizes the
results by each plugin's unique identifier so that we can avoid retrieving
the same schemas multiple times when working with the same context.
This doesn't change the API of Context.Schemas but it does restore the
spirit of an earlier version of terraform.Context which did all of the
schema loading proactively inside terraform.NewContext. In an earlier
commit we reduced the scope of terraform.NewContext, making schema loading
a separate step, but in the process of doing that removed the effective
memoization of the schema results that terraform.NewContext was providing.
The memoization here will play out in a different way than before, because
we'll be treating each plugin call as separate rather than proactively
loading them all up front, but this is effectively the same because all
of our operation methods on Context call Context.Schemas early in their
work and thus end up forcing all of the necessary schemas to load up
front nonetheless.
In the v0.12 timeframe we made contextComponentFactory an interface with
the expectation that we'd write mocks of it for tests, but in practice we
ended up just always using the same "basicComponentFactory" implementation
throughout.
In the interests of simplification then, here we replace that interface
and its sole implementation with a new concrete struct type
contextPlugins.
Along with the general benefit that this removes an unneeded indirection,
this also means that we can add additional methods to the struct type
without the usual restriction that interface types prefer to be small.
In particular, in a future commit I'm planning to add methods for loading
provider and provisioner schemas, working with the currently-unused new
fields this commit has included in contextPlugins, as compared to its
predecessor basicComponentFactory.
In earlier Terraform versions we used the set of all available plugins of
each type to make graph-building decisions, but in modern Terraform we
make those decisions based entirely on the configuration.
Consequently, we no longer need the methods which can enumerate all of the
known plugin components of a given type. Instead, we just try to
instantiate each of the plugins that the configuration refers to and then
handle the error when that fails, which typically means that the user
needs to run "terraform init" to install some new plugins.
In earlier incarnations of these transformers we used the set of all
available providers for tasks such as generating implied provider
configuration nodes.
However, in modern Terraform we can extract all of the information we need
from the configuration itself, and so these transformers weren't actually
using this set of provider addresses.
These also ended up getting left behind as sets of string rather than sets
of addrs.Provider in our earlier refactoring work, which didn't really
matter because the result wasn't used anywhere anyway.
Rather than updating these to use addrs.Provider instead, I've just
removed the unused arguments entirely in the hope of making it easier to
see what inputs these transformers use to make their decisions.
The public interface for loading schemas is Context.Schemas, which can
take into account the context's records of which plugin versions and
checksums we're expecting. loadSchemas is an implementation detail of
that, representing the part we run only after we've verified all of the
plugins.
For resources which are planned to move, render the previous run address
as additional information in the plan UI. For the case of a move-only
resource (which otherwise is unchanged), we also render that as a
planned change, but without any corresponding action symbol.
If all changes in the plan are moves without changes, the plan is no
longer considered "empty". In this case, we skip rendering the action
symbols in the UI.
This package level variable can be overridden at link time to allow
temporarily disabling the UI warning when experimental features are
enabled. This makes it easier to understand how UI will render when the
feature is no longer experimental.
This change is only for those developing Terraform.
This is the first test exercising the basic functionality of config-driven
move. We previously had it skipped because Terraform's previous design
of treating all three of the state artifacts as mutable attributes of
terraform.Context meant that it was too late during planning to deal with
the move operations, and thus this test was failing.
Thanks to the previous commit, which changes the terraform.Context API
such that we can defer creating the three state artifacts until we're
already doing planning, this test now works and shows Terraform correctly
handling a resource that was formerly called "a" and is now called "b",
with a "moved" block recording that renaming.
Previously terraform.Context was built in an unfortunate way where all of
the data was provided up front in terraform.NewContext and then mutated
directly by subsequent operations. That made the data flow hard to follow,
commonly leading to bugs, and also meant that we were forced to take
various actions too early in terraform.NewContext, rather than waiting
until a more appropriate time during an operation.
This (enormous) commit changes terraform.Context so that its fields are
broadly just unchanging data about the execution context (current
workspace name, available plugins, etc) whereas the main data Terraform
works with arrives via individual method arguments and is returned in
return values.
Specifically, this means that terraform.Context no longer "has-a" config,
state, and "planned changes", instead holding on to those only temporarily
during an operation. The caller is responsible for propagating the outcome
of one step into the next step so that the data flow between operations is
actually visible.
However, since that's a change to the main entry points in the "terraform"
package, this commit also touches every file in the codebase which
interacted with those APIs. Most of the noise here is in updating tests
to take the same actions using the new API style, but this also affects
the main-code callers in the backends and in the command package.
My goal here was to refactor without changing observable behavior, but in
practice there are a couple externally-visible behavior variations here
that seemed okay in service of the broader goal:
- The "terraform graph" command is no longer hooked directly into the
core graph builders, because that's no longer part of the public API.
However, I did include a couple new Context functions whose contract
is to produce a UI-oriented graph, and _for now_ those continue to
return the physical graph we use for those operations. There's no
exported API for generating the "validate" and "eval" graphs, because
neither is particularly interesting in its own right, and so
"terraform graph" no longer supports those graph types.
- terraform.NewContext no longer has the responsibility for collecting
all of the provider schemas up front. Instead, we wait until we need
them. However, that means that some of our error messages now have a
slightly different shape due to unwinding through a differently-shaped
call stack. As of this commit we also end up reloading the schemas
multiple times in some cases, which is functionally acceptable but
likely represents a performance regression. I intend to rework this to
use caching, but I'm saving that for a later commit because this one is
big enough already.
The proximal reason for this change is to resolve the chicken/egg problem
whereby there was previously no single point where we could apply "moved"
statements to the previous run state before creating a plan. With this
change in place, we can now do that as part of Context.Plan, prior to
forking the input state into the three separate state artifacts we use
during planning.
However, this is at least the third project in a row where the previous
API design led to piling more functionality into terraform.NewContext and
then working around the incorrect order of operations that produces, so
I intend that by paying the cost/risk of this large diff now we can in
turn reduce the cost/risk of future projects that relate to our main
workflow actions.
Here we wire through the "move results" into the graph walk data
structures so that all of the the nodes which produce
plans.ResourceInstanceChange values can capture the "PrevRunAddr" for
each resource instance.
This doesn't actually quite work yet, because the logic in Context.Plan
isn't actually correct and so the updated state from
refactoring.ApplyMoves isn't actually visible as the "previous run state".
For that reason, the context test in this commit is currently skipped,
with the intent of re-enabling it once the updated state is properly
propagating into the plan graph walk and thus we can actually react to
the result of the move while choosing actions for those addresses.
In order to expose the effect of any relevant "moved" statements we dealt
with prior to creating the plan, we'll record with each
ResourceInstanceChange both is current address and the address it was
tracked at for the previous run.
To save consumers of these objects from having to special-case the
situation where there _was_ no previous run (e.g. because this is a Create
change), we'll just pretend the previous run address was the same as the
current address in that case, the same as for an update without any
renaming in effect.
This includes a breaking change to the plan file format, but one that
doesn't require a version number increment because there is no ambiguity
between the two formats and so mismatched parsers will already fail with
an error message.
As of this commit we've just added the new field but not yet populated it
with any useful information: it always just matches Addr. A future commit
will wire this up to the result of applying the moves so that we can
populate it correctly. We also don't yet expose this new information
anywhere in the UI layer.
While blocks were not allowed to be computed by the provider, nested
objects can be. Remove the errors regarding blocks and verify unknown
values are valid.
We have a few different .proto files in this repository that all need to
get recompiled into .pb.go files each time we change them, but we were
previously handling that with some scripts that just assumed that protoc
and the relevant plugins were already installed on the system somewhere,
at the right versions.
In practice we've been constantly flopping between different versions of
these tools due to folks having different versions installed in their
development environments. In particular, the state of the .pb.go files
in the prior commit wasn't reproducible by any single version of the tools
because they've all slightly diverged from one another.
In the interests of being more consistent here and avoiding accidental
inconsistencies, we'll now centralize the protocol buffer compile steps
all into a single tool that knows how to fetch and install the expected
versions of the various tools we need and then run those tools with the
right options to get a stable result.
If we want to upgrade to either a newer protoc or a newer protoc-gen-go
in future then we'll do that in a central location and update all of the
.pb.go files at the same time, so that we're always consistently tracking
the same version of protocol buffers everywhere.
While doing this I attempted to keep as close as possible to the toolchain
we'd most recently used, but since they were not consistent with each
other they've now all changed which version numbers they record at minimum,
and the planproto stub in particular now also has a slightly different
descriptor serialization but is otherwise offering the same API.
CanChainFrom needs to be able to handle move statements from different
relative modules, re-implementing with addrs.anyKey
Add the anyKey InstanceKey value to the addrs package to simplify module
path comparison. This allows all combinations of module path
representation to be normalized into a ModuleInstance which can be
compared directly, rather than dealing with multiple levels of different
prefix types.
The -force-copy flag to init should automatically migrate state.
Previously this was not applied to one case: when migrating from
a backend with multiple workspaces to another backend supporting
multiple workspaces. I believe this was an oversight so this commit
fixes that.
We're aware of several quirks of this command's current design, which
result from some existing architectural limitations that we can't address
immediately.
However, we do still want to make this command available in its current
capacity as an incremental improvement, so as a compromise we'll document
it as experimental. Our intent here is to exclude it from the
Terraform 1.0 Compatibility Promises so that we can have the space to
continue to improve the design as other parts of the overall Terraform
system gain new capabilities.
We don't currently have any concrete plan for this command to be
stabilized and subject to compatibility promises. That decision will
follow from ongoing discussions with other teams whose systems may need to
change in order to support the final design of "terraform add".
The code adopted from block diffs was not set to handle null and unknown
values, as those are not allowed for blocks.
We also revert the change to formatting nested object types as single
attributes, because the attribute formatter cannot handle sensitive
values from the schema. This presents some awkward syntax for diffs for
now, but should suffice until the entire formatter can be refactored to
better handle these new nested types.
Go 1.17 includes a breaking change to both net.ParseIP and net.ParseCIDR
functions to reject IPv4 address octets written with leading zeros.
Our use of these functions as part of the various CIDR functions in the
Terraform language doesn't have the same security concerns that the Go
team had in evaluating this change to the standard library, and so we
can't justify an exception to our v1.0 compatibility promises on the same
sort of security grounds that the Go team used to justify their
compatibility exception.
For that reason, we'll now use our own fork of the Go library functions
which has the new check disabled in order to preserve the prior behavior.
We're taking this path, rather than pre-normalizing the IP address before
calling into the standard library, because an additional normalization
layer would be entirely new code and additional complexity, whereas this
fork is relatively minor in terms of code size and avoids any significant
changes to our own calls to these functions.
Thanks to the Kubernetes team for their prior work on carving out a subset
of the "net" package for their similar backward-compatibility concern.
Our "ipaddr" package here is a lightly-modified fork of their fork, with
only the comments changed to talk about Terraform instead of Kubernetes.
This fork is not intended for use in any other future feature
implementations, because they wouldn't be subject to the same
compatibility constraints as our existing functions. We will use these
forked implementations for new callers only if consistency with the
behavior of the existing functions is a key requirement.
This includes the addition of the new "//go:build" comment form in addition
to the legacy "// +build" notation, as produced by gofmt to ensure
consistent behavior between Go versions. The new directives are all
equivalent to what was present before, so there's no change in behavior.
Go 1.17 continues to use the Unicode 13 tables as in Go 1.16, so this
upgrade does not require also upgrading our Unicode-related dependencies.
This upgrade includes the following breaking changes which will also
appear as breaking changes for Terraform users, but that are consistent
with the Terraform v1.0 compatibility promises.
- On MacOS, Terraform now requires macOS 10.13 High Sierra or later.
This upgrade also includes the following breaking changes which will
appear as breaking changes for Terraform users that are inconsistent with
our compatibility promises, but have justified exceptions as follows:
- cidrsubnet, cidrhost, and cidrnetmask will now reject IPv4 CIDR
addresses whose decimal components have leading zeros, where previously
they would just silently ignore those leading zeros.
This is a security-motivated exception to our compatibility promises,
because some external systems interpret zero-prefixed octets as octal
numbers rather than decimal, and thus the previous lenient parsing could
lead to a different interpretation of the address between systems, and
thus potentially allow bypassing policy when configuring firewall rules
etc.
This upgrade also includes the following breaking changes which could
_potentially_ appear as breaking changes for Terraform users, but that do
not in practice for the reasons given:
- The Go net/url package no longer allows query strings with pairs
separated by semicolons instead of ampersands. This primarily affects
HTTP servers written in Go, and Terraform includes a special temporary
HTTP server as part of its implementation of OAuth for "terraform login",
but that server only needs to accept URLs created by Terraform itself
and Terraform does not generate any URLs that would be rejected.
Add implementations of CanChainFrom and NestedWithin for
MoveEndpointInModule.
CanChainFrom allows the linking of move statements of the same address,
which means the prior destination address must equal the following
source address. If the destination and source addresses are of different
types, they must be covered by NestedWithin rather than CanChainFrom.
NestedWithin checks if the destination contains the source address. Any
matching types would be covered by CanChainFrom.
Extend the outputs JSON log message to support an `action` field (and
make the `type` and `value` fields optional). This allows us to emit a
useful output change summary as part of the plan, bringing the JSON log
output into parity with the text output.
While we do have access to the before/after values in the output
changes, attempting to wedge those into a structured log message is not
appropriate. That level of detail can be extracted from the JSON plan
output from `terraform show -json`.
This is a first pass at implementing refactoring.ValidateMoves, covering
the main validation rules.
This is not yet complete. A couple situations not yet covered are
represented by commented test cases in TestValidateMoves, although that
isn't necessarily comprehensive. We'll do a further pass of filling this
out with any other subtleties before we ship this feature.
As of this commit, refactoring.ValidateMoves doesn't actually do anything
yet (always returns nil) but the goal here is to wire in the set of all
declared instances so that refactoring.ValidateMoves will then have all
of the information it needs to encapsulate our validation rules.
The actual implementation of refactoring.ValidateMoves will follow in
subsequent commits.
In order to precisely implement the validation rules for "moved"
statements we need to be able to test whether particular instances were
declared in the configuration.
The instance expander is the source of record for which instances we
decided while creating a plan, but it's API is far more involved than what
our validation rules need, so this new AllInstances method returns a
wrapper object with a more straightforward API that provides read-only
access to just the question of whether particular instances got registered
in the expander already.
This API covers all three of the kinds of objects that move statements can
refer to. It includes module calls and resources, even though they aren't
_themselves_ "instances" in the sense we usually mean, because the module
instance addresses they are contained within _are_ instances and so we
need to take their dynamic instance keys into account when answering these
queries.
All of our MoveDestination methods have the common problem of deciding
whether the receiver is even potentially in the scope of a particular
MoveEndpointInModule, which requires that the receiver belong to an
instance of the module where the move statement was found.
Previously we had this logic inline in all three cases, but now we'll
factor it out into a shared helper function.
At first it seemed like there ought to be more factoring possible for
the AbsResource vs. AbsResourceInstance implementations, since textually
they look very similar, but in practice they only look similar because
those two types have a lot of method names in common, but the Go compiler
sees them as completely distinct and thus we must write the same logic
out twice. I did try some further refactoring to address that but it
made the resulting code significantly more complicated and, by my
judgement, harder to follow. Consequently I decided that a little
duplication was okay and warranted here because this logic is already
quite fiddly to read through and isn't likely to change significantly once
released (due to backward-compatibility promises).
Previously our MoveDestination methods only honored move statements whose
endpoints were module calls, module instances, or resources.
Now we'll additionally handle when the endpoints are individual resource
instances. This situation only applies to
AbsResourceInstance.MoveDestination because no other objects can be
contained inside of a resource instance.
This completes all of the MoveDestination cases for all supported move
statement types and moveable object types.
Previously our MoveDestination methods only honored move statements whose
endpoints were module calls or module instances.
Now we'll additionally handle when the endpoints are whole resource
addresses. This includes both renaming resource blocks and moving resource
blocks into or out of child modules.
This doesn't yet include endpoints that are specific resource _instances_,
which will follow in a subsequent commit. For the moment that situation
will always indicate a non-match.
This is a subset of the MoveDestination behavior for AbsResource and
AbsResourceInstance which deals with source and destination addresses that
refer to module calls or module instances.
They both work by delegating to ModuleInstance.MoveDestination and then
applying the same resource or resource instance address to the
newly-chosen module instance address, thus ensuring that when we move
a module we also move all of the resources inside that module in the same
way.
This doesn't yet include support for moving between specific resource or
resource instance addresses; that'll follow later. This commit should have
enough logic to support moving between module names and module instance
keys, including any module calls or resources nested within.
This method encapsulates the move-processing rules for applying move
statements to ModuleInstance addresses. It honors both module call moves
and module instance moves by trying to find a subsequence of the input
that matches the "from" endpoint and then, if found, replacing it with
the "to" endpoint while preserving the prefix and suffix around the match,
if any.
* configs/configschema: extend block.AttributeByPath to descend into Objects
This commit adds a recursive Object.AttributeByPath function which will step through Attributes with NestedTypes. If an Attribute without a NestedType is encountered while there is still more to the path, it will return nil.
The etcdv3 client has a default request send limit of 2.0 MiB. This change
exposes the configuration option to increase that limit enabling larger
state using the etcdv3 backend.
This also requires that the corresponding --max-request-bytes flag be
increased on the server side. The default there is 1.5 MiB.
Fixes https://github.com/hashicorp/terraform/issues/25745
etcd rewrote its import path from coreos/etcd to go.etcd.io/etcd.
Changed the imports path in this commit, which also updates the code
version.
This lets us remove the github.com/ugorji/go/codec dependency, which
was pinned to a fairly old version. The net change is a loss of 30,000
lines of code in the vendor directory. (I first noticed this problem
because the outdated go/codec dependency was causing a dependency
failure when I tried to put Terraform and another project in the same
vendor directory.)
Note the version shows up funkily in go.mod, but I verified
visually it's the same commit as the "release-3.4" tag in
github.com/coreos/etcd. The etcd team plans to fix the release version
tagging in v3.5, which should be released soon.
The current usage of internal remote state backends requires that
`StateMgr` be able to return an instance of `statemgr.Full` even if the
state is currently locked.
Up until now marks were not considered by `ignore_changes`, that however
means changes to sensitivity within a configuration cannot ignored, even
though they are planned as changes.
Rather than separating the marks and tracking their paths, we can easily
update the processIgnoreChanges routine to handle the marked values
directly. Moving the `processIgnoreChanges` call also cleans up some of
the variable naming, making it more consistent through the body of the
function.
* configs/configschema: fix missing "computed" attributes from NestedObject's ImpliedType
listOptionalAttrsFromObject was not including "computed" attributes in the list of optional object attributes. This is now fixed. I've also added some tests and fixed some panics and otherwise bad behavior when bad input is given. One natable change is in ImpliedType, which was panicking on an invalid nesting mode. The comment expressly states that it will return a result even when the schema is inconsistent, so I removed the panic and instead return an empty object.
Update the version constraints for what providers will be downloaded
from the registry, allowing protocol 6 providers to be downloaded from
the registry.
This test would previously fail randomly due to the use of multiple
resource instances. Instance keys are iterated over as a map for
presentation, which has intentionally inconsistent ordering.
To fix this, I changed the test to use different resource addresses for
the three drift cases. I also extracted them to a separate test, and
tweaked the test helper functions to reduce the number of fatal exit
points, to make failed test debugging easier.
This is a whole lot of nothing right now, just stubbing out some control
flow that ultimately just leads to TODOs that cause it to do nothing at
all.
My intent here is to get this cross-cutting skeleton in place and thus
make it easier for us to collaborate on adding the meat to it, so that
it's more likely we can work on different parts separately and still get
a result that tessellates.
We previously built out addrs.UnifyMoveEndpoints with a different
implementation strategy in mind, but that design turns out to not be
viable because it forces us to move to AbsMoveable addresses too soon,
before we've done the analysis required to identify chained and nested
moves.
Instead, UnifyMoveEndpoints will return a new type MoveEndpointInModule
which conceptually represents a matching pattern which either matches or
doesn't match a particular AbsMoveable. It does this by just binding the
unified relative address from the MoveEndpoint to the module where it
was declared, and thus allows us to distinguish between the part of the
module path which applies to any instances of the given modules vs. the
user-specified part which must identify particular module instances.
Since these address types are not directly comparable themselves, we use
an unexported named type around the string representation, whereby the
special type can avoid any ambiguity between string representations of
different types and thus each type only needs to worry about possible
ambiguity of its _own_ string representation.
Many times now we've seen situations where we need to use addresses
as map keys, but not all of our address types are comparable and thus
we tend to end up using string representations as keys instead.
That's problematic because conversion to string uses type information
and some of the address types have string representations that are
ambiguous with one another.
UniqueKey therefore represents an opaque key that is unique for each
functionally-distinct address across all types that implement
UniqueKeyer.
For this initial commit I've implemented UniqueKeyer only for the
Referenceable family of types. These are an easy case because they
were all already comparable (intentionally) anyway. Later commits
can implement UniqueKeyer for other types that are not naturally
comparable, such as any which include a ModuleInstance.
This also includes a new type addrs.Set which wraps a map as a set
of addresses, using the unique keys to ensure that there can be only
one element for each distinct address.
Some users would want to use Consul namespaces when using the Consul
backend but the version of the Consul API client we use is too old and
don't support them. In preparation for this change this patch just update
it the client and replace testutil.NewTestServerConfig() by
testutil.NewTestServerConfigT() in the tests.
* states: add MoveAbsResource and MoveAbsResourceInstance state functions and corresponding syncState wrapper functions.
* states: add MoveModuleInstance and MaybeMoveModuleInstance
* addrs: adding a new function, ModuleInstance.IsDeclaredByCall, which returns true if the receiver is an instance of the given AbsModuleCall.
The logic behind this code took me a while to understand, so I wrote
down what I understand to be the reasoning behind how it works. The
trickiest part is rendering changing objects as updates. I think the
other pieces are fairly common to LCS sequence diff rendering, so I
didn't explain those in detail.
Martin Atkins