The default value for `source_dest_check` needs to remain the same, so as not to break any backwards compatibility, however, adding a new `network_interface` parameter with a pre-configured network_interface that has `source_dest_check` set to false throws a diff after initial apply. Since we don't want to change `source_dest_check` to computed in order to not break sane defaults, ignore the diff thrown if `network_interface` attributes are configured on an instance.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS="-run=TestAccAWSInstance_primaryNetworkInterfaceSourceDestCheck"
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/04/28 16:26:02 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSInstance_primaryNetworkInterfaceSourceDestCheck -timeout 120m
=== RUN TestAccAWSInstance_primaryNetworkInterfaceSourceDestCheck
--- PASS: TestAccAWSInstance_primaryNetworkInterfaceSourceDestCheck (134.20s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 134.211s
```
```
$ make testacc TEST=./builtin/providers/aws TESTARGS="-run=TestAccAWSInstance_sourceDestCheck"
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/04/28 16:15:14 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSInstance_sourceDestCheck -timeout 120m
=== RUN TestAccAWSInstance_sourceDestCheck
--- PASS: TestAccAWSInstance_sourceDestCheck (179.81s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 179.815s
```
Fixes: #14068
This commit adds an option to skip TLS verification of the Triton
endpoint, which can be useful for private or temporary installations not
using a certificate signed by a trusted root CA.
Fixes#13722.
Fixes: #14049
The China and Gov regions do not support the new way of tagging
instances and volumes on creation. Therefore, we need to hack this to
make sure we don't try and set these on instance creation
The introduction of volume_tags was causing a ForceNew on
spot_instance_requests
This has now been treated the same way as tags
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSSpotInstanceRequest_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/04/28 05:17:42 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSSpotInstanceRequest_ -timeout 120m
=== RUN TestAccAWSSpotInstanceRequest_basic
--- PASS: TestAccAWSSpotInstanceRequest_basic (213.75s)
=== RUN TestAccAWSSpotInstanceRequest_withBlockDuration
--- PASS: TestAccAWSSpotInstanceRequest_withBlockDuration (212.14s)
=== RUN TestAccAWSSpotInstanceRequest_vpc
--- PASS: TestAccAWSSpotInstanceRequest_vpc (130.44s)
=== RUN TestAccAWSSpotInstanceRequest_SubnetAndSG
--- PASS: TestAccAWSSpotInstanceRequest_SubnetAndSG (234.43s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 790.791s
```
When you specify the ID of an image that has a slug, terraform would
store its slug to the state, hence it would always recreate the image.
This commit fixes it by storing the image as an ID when it is specified
by and ID by the user, ignoring the slug.
Closes#12751.
Fixes#12255.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Update our project metadata tests to stand up their own projects, so
they don't trample all over each other anymore.
The fixes for this were more invasive than I had hoped they would be,
but the tests all pass now (when run sequentially) and there's no reason
for them not to pass when run in parallel.
We have tests failing because we hard-coded the network name in our
network data source test. By randomizing it, we don't fix the dangling
resource problem, but do make the tests pass again.
Federated users calling `iam:GetUser` will get the error code `InvalidClientTokenId` so this shouldn't bail out but instead continue on to try `sts:GetCallerIdentity`.
Reverts #13883.
Quoting @radeksimko: "We actually refresh the state
as part of every test step, so this is not necessary"
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Fixes: #14003
When an EBS volume was created and tags were specified on that resource
and NOT the aws_instance it was attached to, the tags would be removed
on subsequent Terraform runs.
We need to set volume_tags to be Computed to allow for changes to EBS
volumes not created as part of the instance but that are attached to the
instance
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSInstance_volumeTagsComputed'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/04/27 07:33:36 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSInstance_volumeTagsComputed -timeout 120m
=== RUN TestAccAWSInstance_volumeTagsComputed
--- PASS: TestAccAWSInstance_volumeTagsComputed (151.37s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 151.411s
```
Fixes: #12496
When an EBS volume was attached to an instance and the user tried to
resize, they would get an error as follows:
```
* aws_ebs_volume.ebs_data_volume: Error waiting for Volume (vol-027e83f7) to become available: unexpected state 'in-use', wanted target 'available'. last error: %!s(<nil>)
```
`available` is a state *only* when creating an EBS volume that is not attached. When an instance is attached, it will go into the state `in-use`. Therefore `in-use` is a valid state when modifying an EBS volume that is attached:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEBSVolume_' ✹ ✭
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/04/27 07:08:18 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSEBSVolume_ -timeout 120m
=== RUN TestAccAWSEBSVolume_importBasic
--- PASS: TestAccAWSEBSVolume_importBasic (41.10s)
=== RUN TestAccAWSEBSVolume_basic
--- PASS: TestAccAWSEBSVolume_basic (38.22s)
=== RUN TestAccAWSEBSVolume_updateAttachedEbsVolume
--- PASS: TestAccAWSEBSVolume_updateAttachedEbsVolume (199.11s)
=== RUN TestAccAWSEBSVolume_updateSize
--- PASS: TestAccAWSEBSVolume_updateSize (70.53s)
=== RUN TestAccAWSEBSVolume_updateType
--- PASS: TestAccAWSEBSVolume_updateType (69.75s)
=== RUN TestAccAWSEBSVolume_updateIops
--- PASS: TestAccAWSEBSVolume_updateIops (70.38s)
=== RUN TestAccAWSEBSVolume_kmsKey
--- PASS: TestAccAWSEBSVolume_kmsKey (76.64s)
=== RUN TestAccAWSEBSVolume_NoIops
--- PASS: TestAccAWSEBSVolume_NoIops (39.80s)
=== RUN TestAccAWSEBSVolume_withTags
--- PASS: TestAccAWSEBSVolume_withTags (38.04s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 643.609s
```
The Triton CLI tools have been using TRITON_* as their configuration
environment variables for some time now. This commit makes Terraform use
them in preference to any SDC_* variables set, and allows Terraform to
work with the credentials set by the `triton env` in the CLI.
We can only ever have 5 cloudtrails in an AWS account so we want to make
sure we run these tests serially to make sure we don't exhaust limits
and get non-deterministic failures
* Make dnsimple_records importable
terraform 0.7 supports importing a resource into the local state, and
this adds that feature to the dnsimple_record resource.
Unfortunately, the DNSimple v1 API requires a domain name and record ID
to fetch a record, so the import command accepts both pieces of data as
a slash-delimted string like so:
terraform import dnsimple_record.test example.com/1234
* add an acceptance test for importing a dnsimple_record
Gareth Oakley