Commit Graph

82 Commits

Author SHA1 Message Date
Radek Simko 2496bc2b1e
internal/registry: Add URL to error message for clarity (#29298) 2021-08-10 15:20:40 +01:00
Paddy 8bdea502ab
Add support for protocol 6 providers during init. (#29153)
Update the version constraints for what providers will be downloaded
from the registry, allowing protocol 6 providers to be downloaded from
the registry.
2021-07-15 09:39:40 -07:00
Martin Atkins e5f52e56f8 addrs: Rename DefaultRegistryHost to DefaultProviderRegistryHost
As the comment notes, this hostname is the default for provide source
addresses. We'll shortly be adding some address types to represent module
source addresses too, and so we'll also have DefaultModuleRegistryHost
for that situation.

(They'll actually both contain the the same hostname, but that's a
coincidence rather than a requirement.)
2021-06-03 08:50:34 -07:00
Kristin Laemmert 649095c602
providers subcommand tests (#28744)
* getproviders ParsePlatform: add check for invalid platform strings with too many parts

The existing logic would not catch things like a platform string containing multiple underscores. I've added an explicit check for exactly 2 parts and some basic tests to prove it.

* command/providers-lock: add tests

This commit adds some simple tests for the providers lock command. While adding this test I noticed that there was a mis-copied error message, so I replaced that with a more specific message. I also added .terraform.lock.hcl to our gitignore for hopefully obvious reasons.

getproviders.ParsePlatform: use parts in place of slice range, since it's available

* command: Providers mirror tests

The providers mirror command is already well tested in e2e tests, so this includes only the most absolutely basic test case.
2021-05-19 12:56:16 -04:00
Martin Atkins b9a93a0fe7 Move addrs/ to internal/addrs/
This is part of a general effort to move all of Terraform's non-library
package surface under internal in order to reinforce that these are for
internal use within Terraform only.

If you were previously importing packages under this prefix into an
external codebase, you could pin to an earlier release tag as an interim
solution until you've make a plan to achieve the same functionality some
other way.
2021-05-17 14:09:07 -07:00
Martin Atkins 4c254cc2be Move httpclient/ to internal/httpclient/
This is part of a general effort to move all of Terraform's non-library
package surface under internal in order to reinforce that these are for
internal use within Terraform only.

If you were previously importing packages under this prefix into an
external codebase, you could pin to an earlier release tag as an interim
solution until you've make a plan to achieve the same functionality some
other way.
2021-05-17 14:09:07 -07:00
James Bardin a4a6b40bee update getproviders tests for new key 2021-04-23 11:18:58 -04:00
James Bardin e1d790be61 update HC PublicKey 2021-04-23 11:18:58 -04:00
Pam Selle 242f319638
Give suggestions & remind users to use required_providers when provider not in registry (#28014)
* Add helper suggestion when failed registry err

When someone has a failed registry error on init, remind them that
they should have required_providers in every module

* Give suggestion for a provider based on reqs

Suggest another provider on a registry error, from the list of
requirements we have on init. This skips the legacy lookup
process if there is a similar provider existing in requirements.
2021-03-11 08:54:18 -05:00
Alex Chan 4ec80fa18d Correct the spelling of heirarchy/hierarchy throughout 2021-02-05 15:07:04 +00:00
Romain Philibert 5ae5c99ba0 fix: do not fail when provider symlink is broken. Only print a warning.
fix https://github.com/hashicorp/terraform/issues/27445
2021-01-08 12:51:09 +01:00
Martin Atkins 4b3e237668 command/init: Hint about providers in other namespaces
If a user forgets to specify the source address for a provider, Terraform
will assume they meant a provider in the registry.terraform.io/hashicorp/
namespace. If that ultimately doesn't exist, we'll now try to see if
there's some other provider source address recorded in the registry's
legacy provider lookup table, and suggest it if so.

The error message here is a terse one addressed primarily to folks who are
already somewhat familiar with provider source addresses and how to
specify them. Terraform v0.13 had a more elaborate version of this error
message which directed the user to try the v0.13 automatic upgrade tool,
but we no longer have that available in v0.14 and later so the user must
make the fix themselves.
2020-12-10 10:11:27 -08:00
James Bardin f0c3ddf5a1 internal/getproviders: staticcheck 2020-12-02 13:59:19 -05:00
Alisdair McDiarmid b1bc0e5d92 getproviders: Normalize versions before dedupe
When rendering a set of version constraints to a string, we normalize
partially-constrained versions. This means converting a version
like 2.68.* to 2.68.0.

Prior to this commit, this normalization was done after deduplication.
This could result in a version constraints string with duplicate
entries, if multiple partially-constrained versions are equivalent. This
commit fixes this by normalizing before deduplicating and sorting.
2020-11-02 10:45:45 -05:00
Martin Atkins 430318e262 getproviders: Consistent ordering of terms in VersionConstraintsString
An earlier commit made this remove duplicates, which set the precedent
that this function is trying to canonically represent the _meaning_ of
the version constraints rather than exactly how they were expressed in
the configuration.

Continuing in that vein, now we'll also apply a consistent (though perhaps
often rather arbitrary) ordering to the terms, so that it doesn't change
due to irrelevant details like declarations being written in a different
order in the configuration.

The ordering here is intended to be reasonably intuitive for simple cases,
but constraint strings with many different constraints are hard to
interpret no matter how we order them so the main goal is consistency,
so those watching how the constraints change over time (e.g. in logs of
Terraform output, or in the dependency log file) will see fewer noisy
changes that don't actually mean anything.
2020-10-26 12:44:15 -07:00
Alisdair McDiarmid fe9a9fadfb internal: Suppress duplicate version constraints
A set of version constraints can contain duplicates. This can happen if
multiple identical constraints are specified throughout a configuration.

When rendering the set, it is confusing to display redundant
constraints. This commit changes the string renderer to only show the
first instance of a given constraint, and adds unit tests for this
function to cover this change.

This also fixes a bug with the locks file generation: previously, a
configuration with redundant constraints would result in this error on
second init:

Error: Invalid provider version constraints

  on .terraform.lock.hcl line 6:
  (source code not available)

The recorded version constraints for provider
registry.terraform.io/hashicorp/random must be written in normalized form:
"3.0.0".
2020-10-22 12:08:00 -04:00
Alisdair McDiarmid 7a31e56cb7
Merge pull request #26637 from hashicorp/alisdair/fix-locksfile-unconstrained-versions
internal: Fix lockfile constraint output for 1.2.*
2020-10-21 12:05:19 -04:00
Martin Atkins 1fe314b70b getproviders: Don't log if EvalSymlinks changes nothing
Previously this codepath was generating a confusing message in the absense
of any symlinks, because filepath.EvalSymlinks returns a successful result
if the target isn't a symlink.

Now we'll emit the log line only if filepath.EvalSymlinks returns a
result that's different in a way that isn't purely syntactic (which
filepath.Clean would "fix").

The new message is a little more generic because technically we've not
actually ensured that a difference here was caused by a symlink and so
we shouldn't over-promise and generate something potentially misleading.
2020-10-21 07:49:11 -07:00
Alisdair McDiarmid 9576a5b2d8 internal: Fix lockfile constraint output for 1.2.*
If a configuration requires a partial provider version (with some parts
unspecified), Terraform considers this as a constrained-to-zero version.
For example, a version constraint of 1.2 will result in an attempt to
install version 1.2.0, even if 1.2.1 is available.

When writing the dependency locks file, we previously would write 1.2.*,
as this is the in-memory representation of 1.2. This would then cause an
error on re-reading the locks file, as this is not a valid constraint
format.

Instead, we now explicitly convert the constraint to its zero-filled
representation before writing the locks file. This ensures that it
correctly round-trips.

Because this change is made in getproviders.VersionConstraintsString, it
also affects the output of the providers sub-command.
2020-10-20 10:14:03 -04:00
James Bardin 0b31ffa587 use a single log writer
Use a single log writer instance for all std library logging.

Setup the std log writer in the logging package, and remove boilerplate
from test packages.
2020-10-19 14:29:54 -04:00
James Bardin 6ca477f042 move helper/logging to internal
remove a dead code file too
2020-10-19 14:27:53 -04:00
Martin Atkins b3f5c7f1e6 command/init: Read, respect, and update provider dependency locks
This changes the approach used by the provider installer to remember
between runs which selections it has previously made, using the lock file
format implemented in internal/depsfile.

This means that version constraints in the configuration are considered
only for providers we've not seen before or when -upgrade mode is active.
2020-10-09 09:26:23 -07:00
Martin Atkins 59b116f7bf command/init: Remove support for legacy provider addresses
We no longer need to support 0.12-and-earlier-style provider addresses
because users should've upgraded their existing configurations and states
on Terraform 0.13 already.

For now this is only checked in the "init" command, because various test
shims are still relying on the idea of legacy providers the core layer.
However, rejecting these during init is sufficient grounds to avoid
supporting legacy provider addresses in the new dependency lock file
format, and thus sets the stage for a more severe removal of legacy
provider support in a later commit.
2020-09-30 08:54:57 -07:00
Martin Atkins 0b734a2803 command: Make provider installation interruptible
In earlier commits we started to make the installation codepath
context-aware so that it could be canceled in the event of a SIGINT, but
we didn't complete wiring that through the API of the getproviders
package.

Here we make the getproviders.Source interface methods, along with some
other functions that can make network requests, take a context.Context
argument and act appropriately if that context is cancelled.

The main providercache.Installer.EnsureProviderVersions method now also
has some context-awareness so that it can abort its work early if its
context reports any sort of error. That avoids waiting for the process
to wind through all of the remaining iterations of the various loops,
logging each request failure separately, and instead returns just
a single aggregate "canceled" error.

We can then set things up in the "terraform init" and
"terraform providers mirror" commands so that the context will be
cancelled if we get an interrupt signal, allowing provider installation
to abort early while still atomically completing any local-side effects
that may have started.
2020-09-29 10:00:35 -07:00
Martin Atkins ef64df950c getproviders: Prepare for having multiple valid hashes per package
As we continue iterating towards saving valid hashes for a package in a
depsfile lock file after installation and verifying them on future
installation, this prepares getproviders for the possibility of having
multiple valid hashes per package.

This will arise in future commits for two reasons:
- We will need to support both the legacy "zip hash" hashing scheme and
  the new-style content-based hashing scheme because currently the
  registry protocol is only able to produce the legacy scheme, but our
  other installation sources prefer the content-based scheme. Therefore
  packages will typically have a mixture of hashes of both types.
- Installing from an upstream registry will save the hashes for the
  packages across all supported platforms, rather than just the current
  platform, and we'll consider all of those valid for future installation
  if we see both successful matching of the current platform checksum and
  a signature verification for the checksums file as a whole.

This also includes some more preparation for the second case above in that
signatureAuthentication now supports AcceptableHashes and returns all of
the zip-based hashes it can find in the checksums file. This is a bit of
an abstraction leak because previously that authenticator considered its
"document" to just be opaque bytes, but we want to make sure that we can
only end up trusting _all_ of the hashes if we've verified that the
document is signed. Hopefully we'll make this better in a future commit
with some refactoring, but that's deferred for now in order to minimize
disruption to existing codepaths while we work towards a provider locking
MVP.
2020-09-24 14:01:54 -07:00
Martin Atkins 6694cfaa0e getproviders: Add a real type Hash for package hashes
The logic for what constitutes a valid hash and how different hash schemes
are represented was starting to get sprawled over many different files and
packages.

Consistently with other cases where we've used named types to gather the
definition of a particular string into a single place and have the Go
compiler help us use it properly, this introduces both getproviders.Hash
representing a hash value and getproviders.HashScheme representing the
idea of a particular hash scheme.

Most of this changeset is updating existing uses of primitive strings to
uses of getproviders.Hash. The new type definitions are in
internal/getproviders/hash.go.
2020-09-24 14:01:54 -07:00
Martin Atkins 264a3cf031 depsfile: Flatten the "hashes" locks to a single set of strings
Although origin registries return specific [filename, hash] pairs, our
various different installation methods can't produce a structured mapping
from platform to hash without breaking changes.

Therefore, as a compromise, we'll continue to do platform-specific checks
against upstream data in the cases where that's possible (installation
from origin registry or network mirror) but we'll treat the lock file as
just a flat set of equally-valid hashes, at least one of which must match
after we've completed whatever checks we've made against the
upstream-provided checksums/signatures.

This includes only the minimal internal/getproviders updates required to
make this compile. A subsequent commit will update that package to
actually support the idea of verifying against multiple hashes.
2020-09-24 14:01:54 -07:00
Martin Atkins b2c0ccdf96 internal/getproviders: Allow PackageMeta to carry acceptable hashes
The "acceptable hashes" for a package is a set of hashes that the upstream
source considers to be good hashes for checking whether future installs
of the same provider version are considered to match this one.

Because the acceptable hashes are a package authentication concern and
they already need to be known (at least in part) to implement the
authenticators, here we add AcceptableHashes as an optional extra method
that an authenticator can implement.

Because these are hashes chosen by the upstream system, the caller must
make its own determination about their trustworthiness. The result of
authentication is likely to be an input to that, for example by
distrusting hashes produced by an authenticator that succeeds but doesn't
report having validated anything.
2020-09-24 14:01:54 -07:00
Martin Atkins e843097e52 internal/getproviders: Formalize the "ziphash" hashing scheme
This is the pre-existing hashing scheme that was initially built for
releases.hashicorp.com and then later reused for the provider registry
protocol, which takes a SHA256 hash of the official distribution .zip file
and formats it as lowercase hex.

This is a non-ideal hash scheme because it works only for
PackageLocalArchive locations, and so we can't verify package directories
on local disk against such hashes. However, the registry protocol is now
a compatibility constraint and so we're going to need to support this
hashing scheme for the foreseeable future.
2020-09-24 14:01:54 -07:00
Martin Atkins 92723661d0 internal/depsfile: Loading locks from HCL files on disk
This is the initial implementation of the parser/decoder portion of the
new dependency lock file handler. It's currently dead code because the
caller isn't written yet. We'll continue to build out this functionality
here until we have the basic level of both load and save functionality
before introducing this into the provider installer codepath.
2020-09-08 09:50:58 -07:00
Martin Atkins 6993ecb0a6 internal/getproviders: VersionConstraintsString for "~> 2" input
The version constraint parser allows "~> 2", but it behavior is identical
to "~> 2.0". Due to a quirk of the constraint parser (caused by the fact
that it supports both Ruby-style and npm/cargo-style constraints), it
ends up returning "~> 2" with the minor version marked as "unconstrained"
rather than as zero, but that means the same thing as zero in this context
anyway and so we'll prefer to stringify as "~> 2.0" so that we can be
clearer about how Terraform is understanding that version constraint.
2020-09-08 09:50:58 -07:00
Alisdair McDiarmid fc7e467d19 command: Add redirect support to 0.13upgrade
If a provider changes namespace in the registry, we can detect this when
running the 0.13upgrade command. As long as there is a version matching
the user's constraints, we now use the provider's new source address.
Otherwise, warn the user that the provider has moved and a version
upgrade is necessary to move to it.
2020-08-31 14:53:35 -04:00
Martin Atkins 2bd2a9a923 internal/getproviders: HTTPMirrorSource implementation
We previously had this just stubbed out because it was a stretch goal for
the v0.13.0 release and it ultimately didn't make it in.

Here we fill out the existing stub -- with a minor change to its interface
so it can access credentials -- with a client implementation that is
compatible with the directory structure produced by the
"terraform providers mirror" subcommand, were the result to be published
on a static file server.
2020-08-26 13:18:08 -07:00
Martin Atkins 146e983c36 internal/getproviders: package authenticator for our new-style hashes
Earlier we introduced a new package hashing mechanism that is compatible
with both packed and unpacked packages, because it's a hash of the
contents of the package rather than of the archive it's delivered in.
However, we were using that only for the local selections file and not
for any remote package authentication yet.

The provider network mirrors protocol includes new-style hashes as a step
towards transitioning over to the new hash format in all cases, so this
new authenticator is here in preparation for verifying the checksums of
packages coming from network mirrors, for mirrors that support them.

For now this leaves us in a kinda confusing situation where we have both
NewPackageHashAuthentication for the new style and
NewArchiveChecksumAuthentication for the old style, which for the moment
is represented only by a doc comment on the latter. Hopefully we can
remove NewArchiveChecksumAuthentication in a future commit, if we can
get the registry updated to use the new hashing format.
2020-08-26 13:18:08 -07:00
Martin Atkins ce67a818db internal/getproviders: Allow basedir for local search to be symlink
The SearchLocalDirectory function was intentionally written to only
support symlinks at the leaves so that it wouldn't risk getting into an
infinite loop traversing intermediate symlinks, but that rule was also
applying to the base directory itself.

It's pretty reasonable to put your local plugins in some location
Terraform wouldn't normally search (e.g. because you want to get them from
a shared filesystem mounted somewhere) and creating a symlink from one
of the locations Terraform _does_ search is a convenient way to help
Terraform find those without going all in on the explicit provider
installation methods configuration that is intended for more complicated
situations.

To allow for that, here we make a special exception for the base
directory, resolving that first before we do any directory walking.

In order to help with debugging a situation where there are for some
reason symlinks at intermediate levels inside the search tree, we also now
emit a WARN log line in that case to be explicit that symlinks are not
supported there and to hint to put the symlink at the top-level if you
want to use symlinks at all.

(The support for symlinks at the deepest level of search is not mentioned
in this message because we allow it primarily for our own cache linking
behavior.)
2020-08-18 14:28:50 -07:00
Alisdair McDiarmid a18b531b14 getproviders: FakeInstallablePackageMeta filename
Add an optional execFilename argument to the test helper function
FakeInstallablePackageMeta, which allows the creation of invalid
packages.
2020-07-07 15:18:30 -04:00
Kristin Laemmert 47e657c611
internal/getproviders: decode and return any registry warnings (#25337)
* internal/getproviders: decode and return any registry warnings

The public registry may include a list of warnings in the "versions"
response for any given provider. This PR adds support for warnings from
the registry and an installer event to return those warnings to the
user.
2020-06-25 10:49:48 -04:00
Martin Atkins 85af77386c internal/getproviders: PackageFilePathForPackage
This is the equivalent of UnpackedDirectoryPathForPackage when working
with the packed directory layout. It returns a path to a .zip file with
a name that would be detected by SearchLocalDirectory as a
PackageLocalArchive package.
2020-06-01 14:49:43 -07:00
Martin Atkins 9489672d54 internal/getproviders: Package hashing for local filesystem packages
We previously had this functionality available for cached packages in the
providercache package. This moves the main implementation of this over
to the getproviders package and then implements it also for PackageMeta,
allowing us to compute hashes in a consistent way across both of our
representations of a provider package.

The new methods on PackageMeta will only be effective for packages in the
local filesystem because we need direct access to the contents in order
to produce the hash. Hopefully in future the registry protocol will be
able to also provide hashes using this content-based (rather than
archive-based) algorithm and then we'll be able to make this work for
PackageMeta referring to a package obtained from a registry too, but
hashes for local packages only are still useful for some cases right now,
such as generating mirror directories in the "terraform providers mirror"
command.
2020-06-01 14:49:43 -07:00
Paul Tyng 22ef5cc99c Modify language for reporting signing state
Be more explicit about the signing status of fetched plugins and provide documentation about the different signing options.
2020-05-26 13:14:05 -04:00
Kristin Laemmert eead4c49fe command/init: add e2e tests for provider not found messages 2020-05-20 11:04:11 -04:00
Kristin Laemmert 8d28d73de3 getproviders: add a registry-specific error and modify output when a
provider is not found.

Previously a user would see the following error even if terraform was
only searching the local filesystem:

"provider registry registry.terraform.io does not have a provider named
...."

This PR adds a registry-specific error type and modifies the MultiSource
installer to check for registry errors. It will return the
registry-specific error message if there is one, but if not the error
message will list all locations searched.
2020-05-20 11:04:11 -04:00
Kristin Laemmert d350818126
internal/getproviders: fix panic with invalid path parts (#24940)
* internal/getproviders: fix panic with invalid path parts

If the search path is missing a directory, the provider installer would
try to create an addrs.Provider with the wrong parts. For example if the
hostname was missing (as in the test case), it would call
addrs.NewProvider with (namespace, typename, version). This adds a
validation step for each part before calling addrs.NewProvider to avoid
the panic.
2020-05-13 13:16:09 -04:00
Alisdair McDiarmid e27a36cafd internal/getproviders: Retry failed HTTP requests
This is a port of the retry/timeout logic added in #24260 and #24259,
using the same environment variables to configure the retry and timeout
settings.
2020-05-13 09:48:41 -04:00
Kristin Laemmert 60321b41e8
getproviders: move protocol compatibility functions into registry client (#24846)
* internal/registry source: return error if requested provider version protocols are not supported

* getproviders: move responsibility for protocol compatibility checks into the registry client

The original implementation had the providercache checking the provider
metadata for protocol compatibility, but this is only relevant for the
registry source so it made more sense to move the logic into
getproviders.

This also addresses an issue where we were pulling the metadata for
every provider version until we found one that was supported. I've
extended the registry client to unmarshal the protocols in
`ProviderVersions` so we can filter through that list, instead of
pulling each version's metadata.
2020-05-11 13:49:12 -04:00
Alisdair McDiarmid 62b0cbed12 internal: Fix LookupLegacyProvider
When looking up the namespace for a legacy provider source, we need to
use the /v1/providers/-/{name}/versions endpoint. For non-HashiCorp
providers, the /v1/providers/-/{name} endpoint returns a 404.

This commit updates the LegacyProviderDefaultNamespace method and the
mock registry servers accordingly.
2020-05-08 12:29:25 -04:00
Alisdair McDiarmid ae98bd12a7 command: Rework 0.13upgrade sub-command
This commit implements most of the intended functionality of the upgrade
command for rewriting configurations.

For a given module, it makes a list of all providers in use. Then it
attempts to detect the source address for providers without an explicit
source.

Once this step is complete, the tool rewrites the relevant configuration
files. This results in a single "required_providers" block for the
module, with a source for each provider.

Any providers for which the source cannot be detected (for example,
unofficial providers) will need a source to be defined by the user. The
tool writes an explanatory comment to the configuration to help with
this.
2020-05-07 11:38:55 -04:00
Kristin Laemmert 320fcf4942
internal/getproviders: apply case normalizations in ParseMultiSourceMatchingPatterns (#24753)
* internal/getproviders: apply case normalizations in ParseMultiSourceMatchingPatterns

This is a very minor refactor which takes advantage of addrs.ParseProviderPart case normalization to normalize non-wildcard sources.
2020-04-23 14:50:47 -04:00
Martin Atkins 1ce3c60693
command/cliconfig: Explicit provider installation method configuration
This set of commits allows explicit configuration of provider installation methods
in the CLI config, overriding the implicit method selections.
2020-04-23 10:58:00 -07:00
Martin Atkins 8b75d1498f command/cliconfig: Use existing HTTP mirror source rather than new stub
An earlier commit added a redundant stub for a new network mirror source
that was already previously stubbed as HTTPMirrorSource.

This commit removes the unnecessary extra stub and changes the CLI config
handling to use it instead. Along the way this also switches to using a
full base URL rather than just a hostname for the mirror, because using
the usual "Terraform-native service discovery" protocol here doesn't isn't
as useful as in the places we normally use it (the mirror mechanism is
already serving as an indirection over the registry protocol) and using
a direct base URL will make it easier to deploy an HTTP mirror under
a path prefix on an existing static file server.
2020-04-23 10:52:01 -07:00