Use a slightly modified value renderer from terraform-provider-testing
to display values in the console REPL, as well as outputs from the apply
and outputs subcommands.
Derived from code in this repository, MIT licensed:
https://github.com/apparentlymart/terraform-provider-testing
Note that this is technically a breaking change for the console
subcommand, which would previously error if the user attempted to render
an unknown value (such as an unset variable). This was marked as an
unintentional side effect, with the goal being the new behaviour of
rendering "(unknown)", which is why I changed the behaviour in this
commit.
* helper/resource: remove provider resolver test
* repl tests passing
* helper/resource: add some extra shimming to ShimLegacyState
Some of the tests in helper/resource have to shim between legacy and
modern states. Terraform expects modern states to have the Provider set
for each resource (and not be a legacy provider). This PR adds a wrapper
around terraform.ShimLegacyState which iterates through the resources
in the state (after the shim) and adds the provider FQN.
a large refactor to addrs.AbsProviderConfig, embedding the addrs.Provider instead of a Type string. I've added and updated tests, added some Legacy functions to support older state formats and shims, and added a normalization step when reading v4 (current) state files (not the added tests under states/statefile/roundtrip which work with both current and legacy-style AbsProviderConfig strings).
The remaining 'fixme' and 'todo' comments are mostly going to be addressed in a subsequent PR and involve looking up a given local provider config's FQN. This is fine for now as we are only working with default assumption.
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
* huge change to weave new addrs.Provider into addrs.ProviderConfig
* terraform: do not include an empty string in the returned Providers /
Provisioners
- Fixed a minor bug where results included an extra empty string
* terraform/context: use new addrs.Provider as map key in provider factories
* added NewLegacyProviderType and LegacyString funcs to make it explicit that these are temporary placeholders
This PR introduces a new concept, provider fully-qualified name (FQN), encapsulated by the `addrs.Provider` struct.
Previously we were using the experimental HCL 2 repository, but now we'll
shift over to the v2 import path within the main HCL repository as part of
actually releasing HCL 2.0 as stable.
This is a mechanical search/replace to the new import paths. It also
switches to the v2.0.0 release of HCL, which includes some new code that
Terraform didn't previously have but should not change any behavior that
matters for Terraform's purposes.
For the moment the experimental HCL2 repository is still an indirect
dependency via terraform-config-inspect, so it remains in our go.sum and
vendor directories for the moment. Because terraform-config-inspect uses
a much smaller subset of the HCL2 functionality, this does still manage
to prune the vendor directory a little. A subsequent release of
terraform-config-inspect should allow us to completely remove that old
repository in a future commit.
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
Previously we were making an invalid assumption in evaluating module call
references (like module.foo) that the module must exist, which is
incorrect for that particular case because it's a reference to a child
module, not to an object within the current module.
However, now that we have the mechanism for static validation of
references, we'll deal with this one there so it can be caught sooner.
That then makes the original assumption valid, though for a different
reason.
This is verified by two new context tests for validation:
- TestContext2Validate_invalidModuleRef
- TestContext2Validate_invalidModuleOutputRef
In the initial move to HCL2 we started relying only on full expression
evaluation to catch attribute errors, but that's not sufficient for
resource attributes in practice because during validation we can't know
yet whether a resource reference evaluates to a single object or to a
list of objects (if count is set).
To address this, here we reinstate some static validation of resource
references by analyzing directly the reference objects, disregarding any
instance index if present, and produce errors if the remaining subsequent
traversal steps do not correspond to items within the resource type
schema.
This also allows us to produce some more specialized error messages for
certain situations. In particular, we can recognize a reference like
aws_instance.foo.count, which in 0.11 and prior was a weird special case
for determining the count value of a resource block, and offer a helpful
error showing the new length(aws_instance.foo) usage pattern.
This eventually delegates to the static traversal validation logic that
was added to the configschema package in a previous commit, which also
includes some specialized error messages that distinguish between
attributes and block types in the schema so that the errors relate more
directly to constructs the user can see in the configuration.
In future we could potentially move more of the checks from the dynamic
schema construction step to the static validation step, but resources
are the reference type that most needs this immediately due to the
ambiguity caused by the instance indexing syntax. We can safely refactor
other reference types to be statically validated in later releases.
This is verified by two pre-existing context validate tests which we
temporarily disabled during earlier work (now re-enabled) and also by a
new validate test aimed specifically at the special case for the "count"
attribute.
The test suite was not updated to deal with the new assumptions of the
HCL2-based expression evaluator, which requires configuration to exist
as well as state. Therefore we add a simple configuration fixture to have
it validate expressions against.
This also includes updates to expect the different error messages that the
new evaluator produces.
There are still some errors left, because our expression evaluator now
does more validation than before and so we'll need to (in a subsequent
commit) actually use a fixture configuration for these tests so that the
validations will allow the expressions to be validated.
This now uses the HCL2 parser and evaluator APIs and evaluates in terms
of a new-style *lang.Scope, rather than the old terraform.Interpolator
type that is no longer functional.
The Context.Eval method used here behaves differently than the
Context.Interpolater method used previously: it performs a graph walk
to populate transient values such as input variables, local values, and
output values, and produces its scope in terms of the result of that
graph walk. Because of this, it is a lot more robust than the prior method
when asked to resolve references other than those that are persisted
in the state.
The indent function was stripping out newlines, causing multi-element
lists and maps to be rendered incorrectly.
We were also not quoting strings in these nested structures, leading to
weird behavior if any expression punctuation or newlines were present in
these strings.
This part of Terraform will get a more serious overhaul as part of
switching to the new parser/interpreter implementation but this is a
tactical fix to make the results of this command more usable in the
short term.
Pam Selle