The workspace name can be overridden by setting a TF_WORKSPACE
environment variable. If this is done, we should still validate the
resulting workspace name; otherwise, we could end up with an invalid and
unselectable workspace.
This change updates the Meta.Workspace function to return an error, and
handles that error wherever necessary.
Any command using meta.defaultFlagSet *might* occasionally exit before
the flag package's output got written. This caused flag error messages
to get lost. This PR discards the flag package output in favor of
directly returning the error to the end user.
A lot of commands used `c.Meta.flagSet()` to create the initial flagset for the command, while quite a few of them didn’t actually use or support the flags that are then added.
So I updated a few commands to use `flag.NewFlagSet()` instead to only add the flags that are actually needed/supported.
Additionally this prevents a few commands from using locking while they actually don’t need locking (as locking is enabled as a default in `c.Meta.flagSet()`.
We temporarily disabled this because it needed some further work to update
it for the new state models, which has now been done.
We no longer need the configuration objects for the outputs because the
state itself contains all of the information needed for displaying these.
We previously stubbed most of this out because it hadn't yet been updated
to support the new state types, etc.
This restores all of the previous behavior as covered by the tests.
We intentionally remove one behavior that was not covered by the tests:
we used to allow retrieval of outputs from non-root modules using the
-module option, but since we no longer persist non-root outputs in the
state we can no longer support this without a full expression evaluation
walk, and that'd be overkill for this otherwise-simple command. Descendant
module outputs are not part of the public interface of a configuration
anyway, so accessing them from outside in this way is an anti-pattern.
(For debugging scenarios it is still possible to access these from
"terraform console", which _does_ do a full evaluation graph walk to
prepare its evaluation scope.)
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.
The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.
The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.
Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
Due to how deeply the configuration types go into Terraform Core, there
isn't a great way to switch out to HCL2 gradually. As a consequence, this
huge commit gets us from the old state to a _compilable_ new state, but
does not yet attempt to fix any tests and has a number of known missing
parts and bugs. We will continue to iterate on this in forthcoming
commits, heading back towards passing tests and making Terraform
fully-functional again.
The three main goals here are:
- Use the configuration models from the "configs" package instead of the
older models in the "config" package, which is now deprecated and
preserved only to help us write our migration tool.
- Do expression inspection and evaluation using the functionality of the
new "lang" package, instead of the Interpolator type and related
functionality in the main "terraform" package.
- Represent addresses of various objects using types in the addrs package,
rather than hand-constructed strings. This is not critical to support
the above, but was a big help during the implementation of these other
points since it made it much more explicit what kind of address is
expected in each context.
Since our new packages are built to accommodate some future planned
features that are not yet implemented (e.g. the "for_each" argument on
resources, "count"/"for_each" on modules), and since there's still a fair
amount of functionality still using old-style APIs, there is a moderate
amount of shimming here to connect new assumptions with old, hopefully in
a way that makes it easier to find and eliminate these shims later.
I apologize in advance to the person who inevitably just found this huge
commit while spelunking through the commit history.
This is a rather-messy, complex change to get the "command" package
building again against the new backend API that was updated for
the new configuration loader.
A lot of this is mechanical rewriting to the new API, but
meta_config.go and meta_backend.go in particular saw some major
changes to interface with the new loader APIs and to deal with
the change in order of steps in the backend API.
- Fixes#11696
- This changes makes `terraform output -json` return '{}' instead of
throwing an error about "no outputs defined"
- If `-json` is not set, the user will receive an error as before
- This UX helps new users to understand how outputs are used
- Allows for easier automation of TF CLI as an empty set of outputs is
usually acceptable, but any other error from `output` would be
re-raised to the user.
We're shifting terminology from "environment" to "workspace". This takes
care of some of the main internal API surface that was using the old
terminology, though is not intended to be entirely comprehensive and is
mainly just to minimize the amount of confusion for maintainers as we
continue moving towards eliminating the old terminology.
Add Env and SetEnv methods to command.Meta to retrieve the current
environment name inside any command.
Make sure all calls to Backend.State contain an environment name, and
make the package compile against the update backend package.
Terraform can't tell the difference between an empty output and an
undefined output. This is often confusing for folks using interpolation.
As much as it would be great to fix upstream, changing this error
message to be a bit more helpful is a good stop-gap to avoid
frustration.
The behaviour whereby outputs for a particular nested module can be
output was broken by the changes for lists and maps. This commit
restores the previous behaviour by passing the module path into the
outputsAsString function.
We also add a new test of this since the code path for indivdual output
vs all outputs for a module has diverged.
This commit removes the ability to index into complex output types using
`terraform output a_list 1` (for example), and adds a `-json` flag to
the `terraform output` command, such that the output can be piped
through a post-processor such as jq or json. This removes the need to
allow arbitrary traversal of nested structures.
It also adds tests of human readable ("normal") output with nested lists
and maps, and of the new JSON output.
This commit forward ports the changes made for 0.6.17, in order to store
the type and sensitive flag against outputs.
It also refactors the logic of the import for V0 to V1 state, and
fixes up the call sites of the new format for outputs in V2 state.
Finally we fix up tests which did not previously set a state version
where one is required.
- Fix sensitive outputs for lists and maps
- Fix test prelude which was missed during conflict resolution
- Fix `terraform output` to match old behaviour and not have outputs
header and colouring
- Bump timeout on TestAtlasClient_UnresolvableConflict
This changes the representation of maps in the interpolator from the
dotted flatmap form of a string variable named "var.variablename.key"
per map element to use native HIL maps instead.
This involves porting some of the interpolation functions in order to
keep the tests green, and adding support for map outputs.
There is one backwards incompatibility: as a result of an implementation
detail of maps, one could access an indexed map variable using the
syntax "${var.variablename.key}".
This is no longer possible - instead HIL native syntax -
"${var.variablename["key"]}" must be used. This was previously
documented, (though not heavily used) so it must be noted as a backward
compatibility issue for Terraform 0.7.
This commit adds the groundwork for supporting module outputs of types
other than string. In order to do so, the state version is increased
from 1 to 2 (though the "public-facing" state version is actually as the
first state file was binary).
Tests are added to ensure that V2 (1) state is upgraded to V3 (2) state,
though no separate read path is required since the V2 JSON will
unmarshal correctly into the V3 structure.
Outputs in a ModuleState are now of type map[string]interface{}, and a
test covers round-tripping string, []string and map[string]string, which
should cover all of the types in question.
Type switches have been added where necessary to deal with the
interface{} value, but they currently default to panicking when the input
is not a string.
* core: Add support for marking outputs as sensitive
This commit allows an output to be marked "sensitive", in which case the
value is redacted in the post-refresh and post-apply list of outputs.
For example, the configuration:
```
variable "input" {
default = "Hello world"
}
output "notsensitive" {
value = "${var.input}"
}
output "sensitive" {
sensitive = true
value = "${var.input}"
}
```
Would result in the output:
```
terraform apply
Apply complete! Resources: 0 added, 0 changed, 0 destroyed.
Outputs:
notsensitive = Hello world
sensitive = <sensitive>
```
The `terraform output` command continues to display the value as before.
Limitations: Note that sensitivity is not tracked internally, so if the
output is interpolated in another module into a resource, the value will
be displayed. The value is still present in the state.
Alisdair McDiarmid