When checking if a ResourceDiff key is valid, allow for keys that exist
on sub-blocks. This allows things like diff.Clear to be called on
sub-block fields, instead of just on top-level fields.
The `remote` backend config contains an attribute that is defined as a `*schema.Set`, but currently only `string` values are accepted as the `config` attribute is defined as a `schema.TypeMap`.
Additionally the `b.Validate()` method wasn’t called to prevent a possible panic in case of unexpected configurations being passed to `b.Configure()`.
This commit is a bit of a hack to be able to support this in the 0.11 series. The 0.12 series will have proper support, so when merging 0.12 this should be reverted again.
We already had the functionality to make resources deprecated, which was
used when migrating resources to data sources, but the functionality was
unexported, so only the schema package could do it. Now it's exported,
meaning providers can mark entire resources as deprecated. I also added
a test in hopefully-the-right place?
A couple of bugs have been discovered in ResourceDiff.ForceNew:
* NewRemoved is not preserved when a diff for a key is already present.
This is because the second diff that happens after customization
performs a second getChange on not just state and config, but also on
the pre-existing diff. This results in Exists == true, meaning nil is
never returned as a new value.
* ForceNew was doing the work of adding the key to the list of changed
keys by doing a full SetNew on the existing value. This has a side
effect of fetching zero values from what were otherwise undefined values
and creating diffs for these values where there should not have been
(example: "" => "0").
This update fixes these scenarios by:
* Adding a new private function to check the existing diff for
NewRemoved keys. This is included in the check on new values in
diffChange.
* Keys that have been flagged as ForceNew (or parent keys of lists and
sets that have been flagged as ForceNew) are now maintained in a
separate map. UpdatedKeys now returns the results of both of these maps,
but otherwise these keys are ignored by ResourceDiff.
* Pursuant the above, values are no longer pushed into the newDiff
writer by ForceNew. This prevents the zero value problem, and makes for
a cleaner implementation where the provider has to "manually" SetNew to
update the appropriate values in the writer. It also prevents
non-computed keys from winding up in the diff, which ResourceDiff
normally blocks by design.
There are also a couple of tests for cases that should never come up
right now involving Optional/Computed values and NewRemoved, for which
explanations are given in annotations of each test. These are here to
guard against future regressions.
Added some more context to GetOkExists, moved Computed to NewValueKnown
to accommodate some changes that will be coming up in HCL2 that may make
"Computed" less intuitive of a function name, and updated the docs for
NewValueKnown as well.
This adds a new method to ResourceDiff: Computed, which exposes the
computed read result field to ResourceDiff. In the context of
customizing the diff, this is important as interpolated and otherwise
computed values will show up in the diff as blank, with no way of
determining if the value is actually blank or if it's a computed value
not available at diff customization time. Currently assumptions need to
be made on this, but this does not help in validation scenarios where
one needs to differentiate between an actual blank value and a value
that will be available later.
This is exposed for the most part via NewComputed in the diff, but the
tests cover both the config reader as well (with no diff, even though
this should not come up in normal operation) and also the newDiff reader
when someone sets a new value using SetNew and SetNewComputed.
This commit also exposes GetOkExists. The tests were mostly pulled from
ResourceData but a few were added to ensure that config was being
properly covered as well, in addition to covering SetNew and
SetNewComputed.
Return the global default timeout if the ResourceData timeouts are nil.
Set the timeouts from the Resource when calling Resource.Data, so that
the config values are always available.
For historical reasons, the handling of element types for maps is inconsistent with other collection types.
Here we begin a multi-step process to make it consistent, starting by supporting both the "consistent" form of using a schema.Schema and an existing erroneous form of using a schema.Type directly. In subsequent commits we will phase out the erroneous form and require the schema.Schema approach, the same as we do for TypeList and TypeSet.
This new codepath with the getDiff "customzed" return value, along with
the associated test need to be removed as soon as we can support unset
fields from the config, so we don't continue to carry this broken
behavior forward any longer than needed.
This extends the internal diffChange method so that ResourceDiff's
implementation of it can report back whether or not the value came from
a customized diff.
This is an effort to work to preserve the pre-ResourceDiff behaviour
that ignores the diff for computed keys when the old value was populated
but the new value wasn't - this behaviour is actually being depended on
by users that are using it to exploit using zero values in modules. This
should allow both scenarios to co-exist by shifting the NewComputed
exemption over to exempting values that come from diff customization.
This reverts one of the changes from 6a4f7b0, which broke empty strings
being seen as unset for computed values.
This breaks a number of other tests, and is only an intermediate change
for evaluating other solutions.
This case should be expected to fail with the current diff algorithm,
but the existing behavior was widely relied upon so we need to roll this
back until there is a representable nil value.
There are situations where one may need to write to a set, list, or map
more than once per single TF operation (apply/refresh/etc). In these
cases, further writes using Set (example: d.Set("some_set", newSet))
currently create unstable results in the set writer (the name of the
writer layer that holds the data set by these calls) because old keys
are not being cleared out first.
This bug is most visible when using sets. Example: First write to set
writes elements that have been hashed at 10 and 20, and the second write
writes elements that have been hashed at 30 and 40. While the set length
has been correctly set at 2, since a set is basically a map (as is the
entire map writer) and map results are non-deterministic, reads to this
set will now deliver unstable results in a random but predictable
fashion as the map results are delivered to the caller non-deterministic
- sometimes you may correctly get 30 and 40, but sometimes you may get
10 and 20, or even 10 and 30, etc.
This problem propagates to state which is even more damaging as unstable
results are set to state where they become part of the permanent data
set going forward.
The problem also applies to lists and maps. This is probably more of an
issue with maps as a map can contain any key/value combination and hence
there is no predictable pattern where keys would be overwritten with
default or zero values. This is contrary to complex lists, which has
this problem as well, but since lists are deterministic and the length
of a list properly gets updated during the overwrite, the problem is
masked by the fact that a read will only read to the boundary of the
list, skipping any bad data that may still be available due past the
list boundary.
This update clears the child contents of any set, list, or map before
beginning a new write to address this issue. Tests are included for all
three data types.
This keeps CustomizeDiff from being defined on data sources, where it
would be useless. We just catch this in InternalValidate like the rest
of the CRUD functions that are not used in data sources.
Added some more detailed comments to CustomizeDiff's comments. The new
comments detail how CustomizeDiff will be called in the event of
different scenarios like creating a new resource, diffing an existing
one, diffing an existing resource that has a change that requires a new
resource, and destroy/tainted resources.
Also added similar detail to ForceNew in ResourceDiff.
This should help mitigate any confusion that may come up when using
CustomizeDiff, especially in the ForceNew scenario when the second run
happens with no state.
setDiff does not make use of its new parameter anymore, so it has been
removed. Also, as there is no more SetDiff (exported) function, mentions
of that have been removed from comments too.
This fixes nil pointer issues that could come up if an invalid key was
referenced (ie: not one in the schema). Also ships a helper validation
function to streamline things.
Restoring the naming of this field in the resource back to
CustomizeDiff, as this is generally more descriptive of the process
that's happening, despite the lengthy name.
The old comments said that this interface was API compatible with
terraform.ResourceProvider's Diff method - with the addition of passing
down meta to it, this is no longer the case.
Not too sure if this is really a big deal - schema.Resource never fully
implemented terraform.ResourceProvider, from what I can see, and the
path from Provdier.Diff to Resource.Diff is still pretty clear. Just
wanted to remove an outdated comment.
This could panic if we sent a parent that was actually longer than the
child (should almost never come up, but the guard will make it safe
anyway).
Also fixed a slice style lint warning in UpdatedKeys.
The consensus is that it's a generally better idea to move setting the
functionality of old values completely to the refresh/read process,
hence it's moot to have this function around anymore. This also means we
don't need the old value reader/writer anymore, which simplifies things.
When working on this initially, I think I thought that since NewComputed
values in the diff were empty strings, that it was using the zero value.
After review, it doesn't seem like this is the case - so I have adjusted
NewComputed to pass nil values. There is also a guard now that keeps the
new value writer from accepting computed fields with non-nil values.
To keep with the current convention of most other schema.Resource
functional fields being fairly short, CustomizeDiff has been changed to
"Review". It would be "Diff", however it is already used by existing
functions in schema.Provider and schema.Resource.
Both Destroy and DestroyDeposed are not propagated down the diff stack,
meaning that there is no way we can tell at this point if an instance is
being destroyed or deposed, so this check would never be used.
In this regard, Destroy never runs a diff down the stack at all, and a
deposition check is not run until *after* the provider's diff function
is called. To answer this question and close it off, we could either
determine if a resource is deposed earlier, and propagate that down, or
treat deposed resources like full destroy nodes, and not diff them at
all (but rather making a diff with the only thing in it being
DestroyDeposed flagged).
Added a few more test cases for CustomizeDiff, caught another error in
the process. I think this is ready for review now, and possibly some
real-world testing of the waters by way of porting some resources that
would benefit from the feature.
Paddy