Found in testing that a timeout of 30 seconds didn't allow for the error
message that codebuild wasn't supported in eu-west-2
Discussed this with @radeksimko and he suggested a timeout raise
Storing error values to atomic.Value may fail if they have different
dynamic types. Wrap error value in a consistent struct type to avoid
panics.
Make sure we return a nil error on success
Previously the db_event_subscription import would only work if there was a single db_event_subscription resource. This fixes the import, allowing it to work as expected.
Also fixes the acceptance test for the resource to reflect this.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBEventSubscription_importBasic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/07 10:38:10 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSDBEventSubscription_importBasic -timeout 120m
=== RUN TestAccAWSDBEventSubscription_importBasic
--- PASS: TestAccAWSDBEventSubscription_importBasic (633.33s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 633.353s
```
* Adds schema for fastly healthcheck
* Handles changes to the fastly healthcheck
* Flattens and refreshed fastly healthchecks
* Adds testing for fastly healthcheck
* Adds website documentation for fastly healthcheck
* Fixes terraform syntax in test examples
Fixes the `TestAccAWSDBEventSubscription_basicUpdate` acceptance test
`TestAccAWSDBEventSubscription_importBasic` is still failing, but has been failing since November.
This changes removes read of the deprecated `policy_data` attr in
the `google_project` resource.
0.8.5 introduced new behavior that incorrectly read the `policy_data`
field during the read lifecycle event. This caused Terraform to
assume it owned not just policy defined in the data source, but
everything that was associated with the project. Migrating from 0.8.4
to 0.8.5, this would cause the config (partial) to be compared to the
state (complete, as it was read from the API) and assume some
policies had been explicitly deleted. Terraform would then delete them.
Fixes#11556
Allows the user to specify the log format version when setting up `s3logging` on the fastly service resource.
Requires an update to the vendored `go-fastly` dependency.
Also adds an additional acceptance test for the new attribute.
```
$ make testacc TEST=./builtin/providers/fastly TESTARGS='-run=TestAccFastlyServiceV1_s3logging'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/06 14:51:55 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/fastly -v -run=TestAccFastlyServiceV1_s3logging -timeout 120m
=== RUN TestAccFastlyServiceV1_s3logging_basic
--- PASS: TestAccFastlyServiceV1_s3logging_basic (36.11s)
=== RUN TestAccFastlyServiceV1_s3logging_s3_env
--- PASS: TestAccFastlyServiceV1_s3logging_s3_env (15.35s)
=== RUN TestAccFastlyServiceV1_s3logging_formatVersion
--- PASS: TestAccFastlyServiceV1_s3logging_formatVersion (15.71s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/fastly 67.186s
```
- OpenStack provider now supports either a path or the file contents for
`cacert_file`, `cert`, and `key`
- Makes it easier to automate TF by passing in certs as environment
variables
- set `OS_SSL_TESTS=true` to run the acceptance tests
Updates vendored Nomad jobspec parser such that parameterized nomad job files can no be parsed and used with Terraform.
Also fixes tests to adhere to new jobspec version, and update documentation to reflect such as well.
Discovered after #11619 was fixed, and while fixing acceptance tests for the `aws_spot_instance_request` resource.
Previously the `aws_spot_instance_request` resource wouldn't populate any of the block device attributes from the resulting instance's metadata. This fixes that issue, and also fixes the `aws_spot_instance_request` acceptance tests to be more equipped for running in parallel.
```
make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSSpotInstanceRequest_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/02 18:02:37 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSSpotInstanceRequest_ -timeout 120m
=== RUN TestAccAWSSpotInstanceRequest_basic
--- PASS: TestAccAWSSpotInstanceRequest_basic (111.96s)
=== RUN TestAccAWSSpotInstanceRequest_withBlockDuration
--- PASS: TestAccAWSSpotInstanceRequest_withBlockDuration (105.12s)
=== RUN TestAccAWSSpotInstanceRequest_vpc
--- PASS: TestAccAWSSpotInstanceRequest_vpc (115.81s)
=== RUN TestAccAWSSpotInstanceRequest_SubnetAndSG
--- PASS: TestAccAWSSpotInstanceRequest_SubnetAndSG (130.46s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 463.377s
```
Better handle parallel testing of the `aws_spot_fleet_request` resource. Previously we were catching a lot of errors due to naming the policy_attachment resource the same between tests.
* Terraform ProfitBricks Builder
* make fmt
* Merge remote-tracking branch 'upstream/master' into terraform-provider-profitbricks
# Conflicts:
# command/internal_plugin_list.go
* Addressing PR remarks
* Removed importers
* Added ProfitBricks Data Sources
* Added documentation
* Updated to REST v3:
- nat parameter for Nics
- availabilityZone for Volumes
Minor code clean up
* Minor code clean up
* Fixed typo in volume documentation
* make fmt
* Addressing requested changes
* Added a step in load balancer tests in CheckDestroy where we are making sure that the test doesn't leave dangling resources in ProfitBricks
* Changed expected image name
* Fixed data center test
Code clean up
* Add aws dms vendoring
* Add aws dms endpoint resource
* Add aws dms replication instance resource
* Add aws dms replication subnet group resource
* Add aws dms replication task resource
* Fix aws dms resource go vet errors
* Review fixes: Add id validators for all resources. Add validator for endpoint engine_name.
* Add aws dms resources to importability list
* Review fixes: Add aws dms iam role dependencies to test cases
* Review fixes: Adjustments for handling input values
* Add aws dms replication subnet group tagging
* Fix aws dms subnet group doesn't use standard error for resource not found
* Missed update of aws dms vendored version
* Add aws dms certificate resource
* Update aws dms resources to force new for immutable attributes
* Fix tests failing on subnet deletion by adding explicit dependencies. Combine import tests with basic tests to cut down runtime.
* provider/aws: Update Application Auto Scaling service model
- Add support for automatically scaling an Amazon EC2 Spot fleet.
* Remove duplicate policy_type check.
* Test creating a scalable target for a splot fleet request.
* Test creating a scaling policy for a splot fleet request.
* Update resource docs to support scaling an Amazon EC2 Spot fleet.
- aws_appautoscaling_policy
- aws_appautoscaling_target
* Remove arn attribute from aws_appautoscaling_target
- No arn is generated or returned for this resource.
* Remove optional name attribute from aws_appautoscaling_target
- ScalableTargets do not have a name
- I think this was copied from aws_appautoscaling_policy
* AWS Application Autoscaling resource documentation tweaks
- include a target resource in the policy example
- sort attributes by alpha
- fixup markdown
- add spaces to test config
Previously the `root_block_device` config map was a `schema.TypeSet` with an empty `Set` function, and a hard-limit of 1 on the attribute block.
This prevented a user from making any real changes inside the attribute block, thus leaving the user with a `Apply complete!` message, and nothing changed.
The schema API has since been updated, and we can now specify the `root_block_device` as a `schema.TypeList` with `MaxItems` set to `1`. This fixes the issue, and allows the user to update the `aws_instance`'s `root_block_device` attribute, and see changes actually propagate.
Adds tag support to the `aws_dynamodb_table` resource. Also adds a test for the resource, and a test to ensure that the tags are populated correctly from a resource import.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDynamoDBTable_tags'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/01 15:35:00 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSDynamoDBTable_tags -timeout 120m
=== RUN TestAccAWSDynamoDBTable_tags
--- PASS: TestAccAWSDynamoDBTable_tags (28.69s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 28.713s
```
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDynamoDbTable_importTags'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/01 15:39:49 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSDynamoDbTable_importTags -timeout 120m
=== RUN TestAccAWSDynamoDbTable_importTags
--- PASS: TestAccAWSDynamoDbTable_importTags (30.62s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 30.645s
```
I believe that if no VPC Endpoints were returned from the AWS API, we
were not guarding against a panic. We were strill trying to inspect the
RouteTableIds. This commit will ensure that no errors are thrown before
trying to use the RouteTableIds
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSVpcEndpointRouteTableAssociation_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/01 18:06:29 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSVpcEndpointRouteTableAssociation_ -timeout 120m
=== RUN TestAccAWSVpcEndpointRouteTableAssociation_basic
--- PASS: TestAccAWSVpcEndpointRouteTableAssociation_basic (42.83s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 42.859s
```
Fixes the beanstalk env tests such that they can run in parallel better. Previously, only the beanstalk application was randomized, now the beanstalk environment is also randomized to help better facilitate running our tests in parallel.
```
=== RUN TestAccAWSBeanstalkEnv_outputs
--- PASS: TestAccAWSBeanstalkEnv_outputs (388.74s)
=== RUN TestAccAWSBeanstalkEnv_cname_prefix
--- PASS: TestAccAWSBeanstalkEnv_cname_prefix (386.78s)
=== RUN TestAccAWSBeanstalkEnv_config
--- PASS: TestAccAWSBeanstalkEnv_config (532.56s)
=== RUN TestAccAWSBeanstalkEnv_resource
--- PASS: TestAccAWSBeanstalkEnv_resource (420.47s)
=== RUN TestAccAWSBeanstalkEnv_vpc
--- PASS: TestAccAWSBeanstalkEnv_vpc (516.02s)
=== RUN TestAccAWSBeanstalkEnv_template_change
--- PASS: TestAccAWSBeanstalkEnv_template_change (623.38s)
=== RUN TestAccAWSBeanstalkEnv_basic_settings_update
--- PASS: TestAccAWSBeanstalkEnv_basic_settings_update (705.32s)
```
If the shell spawns a subprocess which doesn't close the output file
descriptors, the exec.Cmd will block on Wait() (see
golang.org/issue/18874). Use an os.Pipe to provide the command with a
real file descriptor so the exec package doesn't need to do the copy
manually. This in turn may block our own reading goroutine, but we can
select on that and leave it for cleanup later.
If an `aws_volume_attachment` is identical to one that already exists in
the API, don't attempt to re-create it (which fails), simply act as
though the creation command had already been run and continue.
This allows Terraform to cleanly recover from a situation where a volume
attachment action hangs indefinitely, possibly due to a bad instance
state, requiring manual intervention such as an instance reboot. In such
a situation, Terraform believes the attachment has failed, when in fact
it succeeded after the timeout had expired. On the subsequent retry run,
attempting to re-create the attachment will fail outright, due to the
AttachVolume API call being non-idempotent. This patch implements the
idempotency client-side by matching the (name, vID, iID) tuple.
Note that volume attachments are not assigned an ID by the API.
message
Fixes: #11568
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRDSCluster_missingUserNameCausesError'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/01 12:11:14 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRDSCluster_missingUserNameCausesError -timeout 120m
=== RUN TestAccAWSRDSCluster_missingUserNameCausesError
--- PASS: TestAccAWSRDSCluster_missingUserNameCausesError (3.22s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 3.243s
```
The error message for a required parameter being missing has a wrong parameter baked into it. Therefore, when the error message tried to fire, it was throwing a panic. Added a test to make sure that we know the condition still fires and with a correct message
Fixes: #11549
When a user passes the wrong argument to a route53_record import, they
got a crash. This was because we expected the ID to parse correctly. The
crash looked like this:
```
% terraform import aws_route53_record.import1 mike.westredd.com
aws_route53_record.import1: Importing from ID "mike.westredd.com"...
aws_route53_record.import1: Import complete!
Imported aws_route53_record (ID: mike.westredd.com)
aws_route53_record.import1: Refreshing state... (ID: mike.westredd.com)
Error importing: 1 error(s) occurred:
* aws_route53_record.import1: unexpected EOF
panic: runtime error: index out of range
```
Rather than throwing a panic to the user, we should present them with a more useful message that tells them what the error is:
```
% terraform import aws_route53_record.import mike.westredd.com
aws_route53_record.import: Importing from ID "mike.westredd.com"...
aws_route53_record.import: Import complete!
Imported aws_route53_record (ID: mike.westredd.com)
aws_route53_record.import: Refreshing state... (ID: mike.westredd.com)
Error importing: 1 error(s) occurred:
* aws_route53_record.import: Error Importing aws_route_53 record. Please make sure the record ID is in the form ZONEID_RECORDNAME_TYPE (i.e. Z4KAPRWWNC7JR_dev_A
```
At least they can work out what the problem is in this case
Cloud SQL Gen 2 instances come with a default 'root'@'%' user on
creation. This change automatically deletes that user after creation. A
Terraform user must use the google_sql_user to create a user with
appropriate host and password.
The `aws_availability_zones` data source test was panicking. This fixes both tests
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSAvailabilityZones'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/31 15:47:39 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSAvailabilityZones -timeout 120m
=== RUN TestAccAWSAvailabilityZones_basic
--- PASS: TestAccAWSAvailabilityZones_basic (12.56s)
=== RUN TestAccAWSAvailabilityZones_stateFilter
--- PASS: TestAccAWSAvailabilityZones_stateFilter (13.59s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 26.187s
```
* Added Step Function Activity & Step Function State Machine
* Added SFN State Machine documentation
* Added aws_sfn_activity & documentation
* Allowed import of sfn resources
* Added more checks on tests, fixed documentation
* Handled the update case of a SFN function (might be already deleting)
* Removed the State Machine import test file
* Fixed the eventual consistency of the read after delete for SFN functions
The API asks you to send lower case values, but returns uppercase ones.
Here we lowercase the returned API values.
There is no migration here because the field in question is nested in a
set, so the hash will change regardless. Anyone using this feature now
has it broken anyway.
Radek Simko