Fixed the problem where the root_block_device could cause an apply error
by reading back an "encrypted" parameter that was meant for an
ebs_block_device. "encrypted" is not part of the root_block_device
schema, since it can't be set explicitly.
Added a check in Create to fail when the root device is incorrectly
specified as an ebs_block_device, as this causes continual refreshing
due to mismatched state between root_block_device and ebs_block_device.
"encrypted" and "snapshot_id" should be guarded with ConflictsWith, but
that doesn't appear to work on nested resources despite #1926.
Fixes#7062
make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElasticacheSubnetGroup'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSElasticacheSubnetGroup -timeout 120m
=== RUN TestAccAWSElasticacheSubnetGroup_basic
--- PASS: TestAccAWSElasticacheSubnetGroup_basic (44.62s)
=== RUN TestAccAWSElasticacheSubnetGroup_update
--- PASS: TestAccAWSElasticacheSubnetGroup_update (73.74s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 118.379s
* pr-6865:
provider/aws: Add db_param group to RDS Cluster Instance test
remove status attribute
support aurora instance's parameter group and modifyinstance
When VPC is detached from VPN gateway, its VpcAttachment stays in place
just with state changed to "detached". Since terraform was not checking
attachment state, it used to think VPC gateway was still attached.
Add the iam_arn attribute to aws_cloudfront_origin_access_identity,
which computes the IAM ARN for a certain CloudFront origin access
identity.
This is necessary because S3 modifies the bucket policy if CanonicalUser
is sent, causing spurious diffs with aws_s3_bucket resources.
This brings over the work done by @apparentlymart and @radeksimko in
PR #3124, and converts it into a data source for the AWS provider:
This commit adds a helper to construct IAM policy documents using
familiar Terraform concepts. It makes Terraform-style interpolations
easier and resolves the syntax conflict between Terraform interpolations
and IAM policy variables by changing the latter to use &{...} for its
interpolations.
Its use is completely optional and users are free to go on using literal
heredocs, file interpolations or whatever else; this just adds another
option that fits more naturally into a Terraform config.
This an effort to address hashicorp/terraform#516.
Adding the Sensitive attribute to the resource schema, opening up the
ability for resource maintainers to mark some fields as sensitive.
Sensitive fields are hidden in the output, and, possibly in the future,
could be encrypted.
Closing off my other AWS availability zone branch, I'm adding tests for
the existing aws_availability_zones data source.
This closeshashicorp/terraform#4848.
This data source allows one to look up the most recent AMI for a specific
set of parameters, much like aws ec2 describe-images in the AWS CLI.
Basically a refresh of hashicorp/terraform#4396, in data source form.
* Add per user, role and group policy attachment
* Add docs for new IAM policy attachment resources.
* Make policy attachment resources manage only 1 entity<->policy attachment
* provider/aws: Tidy up IAM Group/User/Role attachments
When two rules differ only in source security group, EC2 APIs return
them as a single rule, but Terraform requires separate
aws_security_group_rule resources.
6bdab07174 changed Read to set source_security_group_id (and
cidr_blocks) from the rule returned from EC2 and chose the first
source_security_group_id arbitrarily, which is wrong.
Makes TestAccAWSSecurityGroupRule_PartialMatching_Source pass again.
Also adds a comment noting that there is a bug in the new resource
importing feature.
Fixes#6728.
This commit adds a data source with a single list, `instance` for the
schema which gets populated with the availability zones to which an
account has access.
resource
We had a line on the Update func that said:
```
Hash key can only be specified at creation, you cannot modify it.
```
The resource has now been changed to ForceNew on the hashkey
```
aws_dynamodb_table.demo-user-table: Refreshing state... (ID: Users)
aws_dynamodb_table.demo-user-table: Destroying...
aws_dynamodb_table.demo-user-table: Destruction complete
aws_dynamodb_table.demo-user-table: Creating...
aws_dynamodb_table.demo-user-table: Creation complete
```
When stage_name is not passed to the resource
aws_api_gateway_deployment a terraform apply will fail. This is
because the stage_name is required and not optional.
As requested in #4822, add support for a KMS Key ID (ARN) for Db
Instance
```
make testacc TEST=./builtin/providers/aws
TESTARGS='-run=TestAccAWSDBInstance_kmsKey' 2>~/tf.log
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSDBInstance_kmsKey -timeout 120m
=== RUN TestAccAWSDBInstance_basic
--- PASS: TestAccAWSDBInstance_basic (587.37s)
=== RUN TestAccAWSDBInstance_kmsKey
--- PASS: TestAccAWSDBInstance_kmsKey (625.31s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 1212.684s
```
missing
Fixes#6625
When an SNS topic subscription was created with TF and then removed via
the AWS Console, Terraform threw an error:
```
* aws_sns_topic_subscription.testme: NotFound: Subscription does not
* exist
status code: 404, request id: a22e7ed7-3630-5a8a-b767-317ac1440e24
```
This PR will remove the topic subscription from state on a NotFound and
will then readd the subscripton
`on_premises_instance_tag_filter`
When setting `on_premises_instance_tag_filter`, Terraform was not
pushing the changes on the cReate (due to a spelling mistake). A second
apply would push the tags and then cause a panic. Terraform was building
a ec2.Tagfilter struct without checking for optional values. When the
TagFilter was being dereferenced, it caused a panic
The `name` attribute will always be normalized to a FQDN, with a trailing "dot"
at the end when returned from the API.
We store the name as it's provided in the configuration, so "www" stays as "www"
and "www.terraformtesting.io." stays as "www.terraformtesting.io.".
The problem here is that if we use a full name as above, and the configuraiton
does *not* include the trailing dot, the API will return a version that does,
and we'll have a conflict.
This is particularly bad when we have a lifecycle block with
`create_before_destroy`; the record will get an update posted (which ends up
being a no-op on AWS's side), but then we'll delete the same record immediately
after, resulting in no record at all.
This PR addresses that by trimming the trailing dot from the `name` when saving
to state. We migrate existing state to match, to avoid false-positive diffs.
* New top level AWS resource aws_eip_association
* Add documentation for aws_eip_association
* Add tests for aws_eip_association
* provider/aws: Change `aws_elastic_ip_association` to have computed
parameters
The AWS API was send ing more parameters than we had set. Therefore,
Terraform was showing constant changes when plans were being formed
Added the hosted_zone_id attribute, which aliases to the Route 53
zone ID that can be used to route Alias Resource Record Sets to.
This fixeshashicorp/terraform#6489.
Change the AWS DB Instance to now include the DB Option Group param. Adds a test to prove that it works
Add acceptance tests for the AWS DB Option Group work. This ensures that Options can be added and updated
Documentation for the AWS DB Option resource
automated_snapshot_retention_period
The default value for `automated_snapshot_retention_period` is 1.
Therefore, it can be included in the `CreateClusterInput` without
needing to check that it is set.
This was actually stopping people from setting the value to 0 (disabling
the snapshots) as there is an issue in `d.GetOk()` evaluating 0 for int
- Addresses the issue when local state file has logging_config populated and the user
disables the configuration via the UI (or in this case an
application of the TF config). This will now properly set the
logging_config during the read operation and identify the state as
diverging
Fixes#6390
* TF-6256 - SG Rule Retry
- Preferring slower but consistent runs when AWS API calls do not properly return the SG Rule in the list of ingress/egress rules.
- Testing has shown that several times that we had to exceed 20 attempts
before the SG was actually returned
* TF-6256 - Refactor of rule lookup
- Adjusting to use resource.Retry
- Extract lookup method for matching ipPermissions set
* provider/aws - CloudFront custom_error_response fixes for missing
- Omit custom_error_response response_* fields when not explicitly set via config for
SDK call
- Adding a test case to ensure that the response_error gets converted
to an empty string properly, versus "0". (Thanks @vancluever)
Fixes#6342
* - Fixing ACC test case resource names
When an SQS queue was deleted from the AWS Console, an error was thrown
to say that the Queue could not be found. This is now fixed to remove
the queue from the state on a specific not found exception
The "find route in table" helper code was not properly handling routes
with no destination CIDR block - like vpc_endpoint routes - so if one of
those routes would come up before the target route in the loop, we'd get
a crash.
Fixes#6337
Paul Forman