This is rarely needed, but sometimes tests need to create temporary files as part of their operation. This should be used sparingly, since it prevents the pro-active cleanup of the temporary working directory.
In terraform-providers/terraform-provider-aws#2935, we have been cleaning code
duplication by benefiting from the "NormalizeJsonString" present in the "structure" helper.
It appears that tests in the AWS provider are covering more use-cases,
which are added in this work.
This new codepath with the getDiff "customzed" return value, along with
the associated test need to be removed as soon as we can support unset
fields from the config, so we don't continue to carry this broken
behavior forward any longer than needed.
This extends the internal diffChange method so that ResourceDiff's
implementation of it can report back whether or not the value came from
a customized diff.
This is an effort to work to preserve the pre-ResourceDiff behaviour
that ignores the diff for computed keys when the old value was populated
but the new value wasn't - this behaviour is actually being depended on
by users that are using it to exploit using zero values in modules. This
should allow both scenarios to co-exist by shifting the NewComputed
exemption over to exempting values that come from diff customization.
This reverts one of the changes from 6a4f7b0, which broke empty strings
being seen as unset for computed values.
This breaks a number of other tests, and is only an intermediate change
for evaluating other solutions.
This case should be expected to fail with the current diff algorithm,
but the existing behavior was widely relied upon so we need to roll this
back until there is a representable nil value.
The CustomizeDiff functionality in helper/schema is powerful, but directly
writing single CustomizeDiff functions can obscure the intent when a
number of different, orthogonal diff-customization behaviors are required.
This new library provides some building blocks that aim to allow a more
declarative form of CustomizeDiff implementation, by composing a number of
smaller operations. For example:
&schema.Resource{
// ...
CustomizeDiff: customdiff.All(
customdiff.ValidateChange("size", func (old, new, meta interface{}) error {
// If we are increasing "size" then the new value must be
// a multiple of the old value.
if new.(int) <= old.(int) {
return nil
}
if (new.(int) % old.(int)) != 0 {
return fmt.Errorf("new size value must be an integer multiple of old value %d", old.(int))
}
return nil
}),
customdiff.ForceNewIfChange("size", func (old, new, meta interface{}) bool {
// "size" can only increase in-place, so we must create a new resource
// if it is decreased.
return new.(int) < old.(int)
}),
customdiff.ComputedIf("version_id", func (d *schema.ResourceDiff, meta interface{}) bool {
// Any change to "content" causes a new "version_id" to be allocated.
return d.HasChange("content")
}),
),
}
The goal is to allow the various separate operations to be quickly seen
and to ensure that each of them runs independently of the others. These
functions all create closures on the call parameters, so the result is
still just a normal CustomizeDiffFunc and so the helpers in this package
can be combined with hand-written functions as needed.
As we get more experience writing CustomizeDiff functions we may wish to
expand the repertoire of functions here in future; this initial set
attempts to cover some common cases we've seen so far. We may also
investigate some helper functions that are entirely declarative and so
don't take callback functions at all, but want to learn what the relevant
use-cases are before going in too deep here.
Looks like while we were checking errors correctly when ExpectError was
set, we weren't checking for the *absence* of an error, which is should
be checked as well (no error is still not the error we are looking for).
Added a few more tests for ExpectError as well.
Validation is the best time to return detailed diagnostics
to the user since we're much more likely to have source
location information, etc than we are in later operations.
This change doesn't actually add any detail to the messages
yet, but it changes the interface so that we can gradually
introduce more detailed diagnostics over time.
While here there are some minor adjustments to some of the
messages to improve their consistency with terminology we
use elsewhere.
StringMatch returns a validation function that can be used to match a
string against a regular expression. This can be used for simple
substring validations or more complex validation scenarios. Optionally,
an error message can be returned so that the user is returned a better
error message other than that their field did not match a regular
expression that they might not be able to understand.
There are situations where one may need to write to a set, list, or map
more than once per single TF operation (apply/refresh/etc). In these
cases, further writes using Set (example: d.Set("some_set", newSet))
currently create unstable results in the set writer (the name of the
writer layer that holds the data set by these calls) because old keys
are not being cleared out first.
This bug is most visible when using sets. Example: First write to set
writes elements that have been hashed at 10 and 20, and the second write
writes elements that have been hashed at 30 and 40. While the set length
has been correctly set at 2, since a set is basically a map (as is the
entire map writer) and map results are non-deterministic, reads to this
set will now deliver unstable results in a random but predictable
fashion as the map results are delivered to the caller non-deterministic
- sometimes you may correctly get 30 and 40, but sometimes you may get
10 and 20, or even 10 and 30, etc.
This problem propagates to state which is even more damaging as unstable
results are set to state where they become part of the permanent data
set going forward.
The problem also applies to lists and maps. This is probably more of an
issue with maps as a map can contain any key/value combination and hence
there is no predictable pattern where keys would be overwritten with
default or zero values. This is contrary to complex lists, which has
this problem as well, but since lists are deterministic and the length
of a list properly gets updated during the overwrite, the problem is
masked by the fact that a read will only read to the boundary of the
list, skipping any bad data that may still be available due past the
list boundary.
This update clears the child contents of any set, list, or map before
beginning a new write to address this issue. Tests are included for all
three data types.
This keeps CustomizeDiff from being defined on data sources, where it
would be useless. We just catch this in InternalValidate like the rest
of the CRUD functions that are not used in data sources.
Added some more detailed comments to CustomizeDiff's comments. The new
comments detail how CustomizeDiff will be called in the event of
different scenarios like creating a new resource, diffing an existing
one, diffing an existing resource that has a change that requires a new
resource, and destroy/tainted resources.
Also added similar detail to ForceNew in ResourceDiff.
This should help mitigate any confusion that may come up when using
CustomizeDiff, especially in the ForceNew scenario when the second run
happens with no state.
setDiff does not make use of its new parameter anymore, so it has been
removed. Also, as there is no more SetDiff (exported) function, mentions
of that have been removed from comments too.
This fixes nil pointer issues that could come up if an invalid key was
referenced (ie: not one in the schema). Also ships a helper validation
function to streamline things.
Restoring the naming of this field in the resource back to
CustomizeDiff, as this is generally more descriptive of the process
that's happening, despite the lengthy name.
The old comments said that this interface was API compatible with
terraform.ResourceProvider's Diff method - with the addition of passing
down meta to it, this is no longer the case.
Not too sure if this is really a big deal - schema.Resource never fully
implemented terraform.ResourceProvider, from what I can see, and the
path from Provdier.Diff to Resource.Diff is still pretty clear. Just
wanted to remove an outdated comment.
This could panic if we sent a parent that was actually longer than the
child (should almost never come up, but the guard will make it safe
anyway).
Also fixed a slice style lint warning in UpdatedKeys.
The consensus is that it's a generally better idea to move setting the
functionality of old values completely to the refresh/read process,
hence it's moot to have this function around anymore. This also means we
don't need the old value reader/writer anymore, which simplifies things.
When working on this initially, I think I thought that since NewComputed
values in the diff were empty strings, that it was using the zero value.
After review, it doesn't seem like this is the case - so I have adjusted
NewComputed to pass nil values. There is also a guard now that keeps the
new value writer from accepting computed fields with non-nil values.
To keep with the current convention of most other schema.Resource
functional fields being fairly short, CustomizeDiff has been changed to
"Review". It would be "Diff", however it is already used by existing
functions in schema.Provider and schema.Resource.
Both Destroy and DestroyDeposed are not propagated down the diff stack,
meaning that there is no way we can tell at this point if an instance is
being destroyed or deposed, so this check would never be used.
In this regard, Destroy never runs a diff down the stack at all, and a
deposition check is not run until *after* the provider's diff function
is called. To answer this question and close it off, we could either
determine if a resource is deposed earlier, and propagate that down, or
treat deposed resources like full destroy nodes, and not diff them at
all (but rather making a diff with the only thing in it being
DestroyDeposed flagged).
Added a few more test cases for CustomizeDiff, caught another error in
the process. I think this is ready for review now, and possibly some
real-world testing of the waters by way of porting some resources that
would benefit from the feature.
It's alive! CustomizeDiff logic now has been inserted into the diff
process. The test_resource_with_custom_diff resource provides some basic
testing and a reference implementation.
There should now be plenty of test coverage for this feature via the
tests added for ResourceDiff, and the basic test added to the
schemaMap.Diff test, and the test resource, but more can be added to
test any specific case that comes up otherwise.
Radek Simko