Commit Graph

25 Commits

Author SHA1 Message Date
Martin Atkins 05caff2ca3 Move tfdiags/ to internal/tfdiags/
This is part of a general effort to move all of Terraform's non-library
package surface under internal in order to reinforce that these are for
internal use within Terraform only.

If you were previously importing packages under this prefix into an
external codebase, you could pin to an earlier release tag as an interim
solution until you've make a plan to achieve the same functionality some
other way.
2021-05-17 14:09:07 -07:00
Alisdair McDiarmid 94340b5940 cli: Add reference to global options to help text 2021-02-22 09:25:56 -05:00
James Bardin 1c58c6ba48 command staticcheck 2020-12-02 13:59:19 -05:00
Alisdair McDiarmid c5c1f31db3 backend: Validate remote backend Terraform version
When using the enhanced remote backend, a subset of all Terraform
operations are supported. Of these, only plan and apply can be executed
on the remote infrastructure (e.g. Terraform Cloud). Other operations
run locally and use the remote backend for state storage.

This causes problems when the local version of Terraform does not match
the configured version from the remote workspace. If the two versions
are incompatible, an `import` or `state mv` operation can cause the
remote workspace to be unusable until a manual fix is applied.

To prevent this from happening accidentally, this commit introduces a
check that the local Terraform version and the configured remote
workspace Terraform version are compatible. This check is skipped for
commands which do not write state, and can also be disabled by the use
of a new command-line flag, `-ignore-remote-version`.

Terraform version compatibility is defined as:

- For all releases before 0.14.0, local must exactly equal remote, as
  two different versions cannot share state;
- 0.14.0 to 1.0.x are compatible, as we will not change the state
  version number until at least Terraform 1.1.0;
- Versions after 1.1.0 must have the same major and minor versions, as
  we will not change the state version number in a patch release.

If the two versions are incompatible, a diagnostic is displayed,
advising that the error can be suppressed with `-ignore-remote-version`.
When this flag is used, the diagnostic is still displayed, but as a
warning instead of an error.

Commands which will not write state can assert this fact by calling the
helper `meta.ignoreRemoteBackendVersionConflict`, which will disable the
checks. Those which can write state should instead call the helper
`meta.remoteBackendVersionCheck`, which will return diagnostics for
display.

In addition to these explicit paths for managing the version check, we
have an implicit check in the remote backend's state manager
initialization method. Both of the above helpers will disable this
check. This fallback is in place to ensure that future code paths which
access state cannot accidentally skip the remote version check.
2020-11-19 13:19:40 -05:00
Kristin Laemmert d2e999ba1f
remove unused code (#26503)
* remove unused code

I've removed the provider-specific code under registry, and unused nil
backend, and replaced a call to helper from backend/oss (the other
callers of that func are provisioners scheduled to be deprecated).

I also removed the Dockerfile, as our build process uses a different
file.

Finally I removed the examples directory, which had outdated examples
and links. There are better, actively maintained examples available.

* command: remove various unused bits

* test wasn't running

* backend: remove unused err
2020-10-07 11:00:06 -04:00
Alisdair McDiarmid b239570abb command: Always validate workspace name
The workspace name can be overridden by setting a TF_WORKSPACE
environment variable. If this is done, we should still validate the
resulting workspace name; otherwise, we could end up with an invalid and
unselectable workspace.

This change updates the Meta.Workspace function to return an error, and
handles that error wherever necessary.
2020-08-11 12:33:12 -04:00
Alisdair McDiarmid 67203dade8 command: Simplify Meta.process helper method
After some refactoring, this helper method had an unused argument (vars)
and an always-nil error return value. This commit cleans this up.
2020-04-01 15:01:08 -04:00
Kristin Laemmert c9d62bb2f6
command: discard output from flags package and return errs directly (#22373)
Any command using meta.defaultFlagSet *might* occasionally exit before
the flag package's output got written. This caused flag error messages
to get lost. This PR discards the flag package output in favor of
directly returning the error to the end user.
2019-08-16 08:31:21 -04:00
Kristin Laemmert c1079b59bd
command/state_list.go: fix bug loading user-defined state (#21015)
* command/state_list.go: fix bug loading user-defined state

If the user supplied a state path via the `-state` flag and terraform
was running in a workspace other than `default`, the state was not being
loaded properly. Fixes #19920
2019-04-15 12:22:07 -04:00
Martin Atkins c39905e1a8 command: Fix various issues in the "terraform state ..." subcommands
In earlier refactoring we updated these commands to support the new
address and state types, but attempted to partially retain the old-style
"StateFilter" abstraction that originally lived in the Terraform package,
even though that was no longer being used for any other functionality.

Unfortunately the adaptation of the existing filtering to the new types
wasn't exact and so these commands ended up having a few bugs that were
not covered by the existing tests.

Since the old StateFilter behavior was the source of various misbehavior
anyway, here it's removed altogether and replaced with some simpler
functions in the state_meta.go file that are tailored to the use-cases of
these sub-commands.

As well as just generally behaving more consistently with the other
parts of Terraform that use the new resource address types, this commit
fixes the following bugs:

- A resource address of aws_instance.foo would previously match an
  resource of that type and name in any module, which disagreed with the
  expected interpretation elsewhere of meaning a single resource in the
  root module.

- The "terraform state mv" command was not supporting moves from a single
  resource address to an indexed address and vice-versa, because the old
  logic didn't need to make that distinction while they are two separate
  address types in the new logic. Now we allow resources that do not have
  count/for_each to be treated as if they are instances for the purposes
  of this command, which is a better match for likely user intent and for
  the old behavior.

Finally, we also clean up a little some of the usage output from these
commands, which hasn't been updated for some time and so had both some
stale information and some inaccurate terminology.
2019-03-18 09:19:55 -07:00
Sander van Harmelen ef9054562e commands: make sure the correct flagset is used
A lot of commands used `c.Meta.flagSet()` to create the initial flagset for the command, while quite a few of them didn’t actually use or support the flags that are then added.

So I updated a few commands to use `flag.NewFlagSet()` instead to only add the flags that are actually needed/supported.

Additionally this prevents a few commands from using locking while they actually don’t need locking (as locking is enabled as a default in `c.Meta.flagSet()`.
2018-11-23 16:13:34 +01:00
Sander van Harmelen 19c1241a50 command/state: update and fix the state rm command 2018-10-24 10:59:33 +02:00
Sander van Harmelen af1a471a05 command/state: update and fix the state list command 2018-10-19 16:31:12 +02:00
Martin Atkins a3403f2766 terraform: Ugly huge change to weave in new State and Plan types
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.

The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.

The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.

Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
2018-10-16 19:11:09 -07:00
Martin Atkins ebafa51723 command: Various updates for the new backend package API
This is a rather-messy, complex change to get the "command" package
building again against the new backend API that was updated for
the new configuration loader.

A lot of this is mechanical rewriting to the new API, but
meta_config.go and meta_backend.go in particular saw some major
changes to interface with the new loader APIs and to deal with
the change in order of steps in the backend API.
2018-10-16 18:44:26 -07:00
Uriel Corfa 07a20365de cli: "terraform state list" -id argument
A new -id option to "terraform state list" which constraints the output of the command to resources whose id is equal to the flag value.
2018-02-26 10:54:48 -08:00
Robert Liebowitz 006744bfe0 Use all tfvars files in working directory
As a side effect, several commands that previously did not have a failure
state can now fail during meta-parameter processing.
2017-07-05 17:24:17 -07:00
Martin Atkins 418a8a8bc9 command + backend: rename various API objects to "Workspace" terminology
We're shifting terminology from "environment" to "workspace". This takes
care of some of the main internal API surface that was using the old
terminology, though is not intended to be entirely comprehensive and is
mainly just to minimize the amount of confusion for maintainers as we
continue moving towards eliminating the old terminology.
2017-06-09 16:26:25 -07:00
James Bardin 39a5ddd381 Split Meta back out of StateMeta
Removing the call to StateMeta.Env, so that it doesn't need an embedded
Meta field. Embed Meta and StateMeta separately in all State commands.
2017-03-01 10:20:32 -05:00
James Bardin b53704ed87 Thread the environment through all commands
Add Env and SetEnv methods to command.Meta to retrieve the current
environment name inside any command.

Make sure all calls to Backend.State contain an environment name, and
make the package compile against the update backend package.
2017-02-28 16:35:46 -05:00
Mitchell Hashimoto 6e1dc9c77d
command: extra RefreshState calls 2017-02-21 20:35:43 -08:00
Mitchell Hashimoto ad7b063262
command: convert to use backends 2017-01-26 14:33:49 -08:00
Mitchell Hashimoto 473a58a672 Add `terraform state list` command
This introduces the terraform state list command to list the resources
within a state. This is the first of many state management commands to
come into 0.7.

This is the first command of many to come that is considered a
"plumbing" command within Terraform (see "plumbing vs porcelain":
http://git.661346.n2.nabble.com/what-are-plumbing-and-porcelain-td2190639.html).
As such, this PR also introduces a bunch of groundwork to support
plumbing commands.

The main changes:

- Main command output is changed to split "common" and "uncommon"
  commands.

- mitchellh/cli is updated to support nested subcommands, since
  terraform state list is a nested subcommand.

- terraform.StateFilter is introduced as a way in core to filter/search
  the state files. This is very basic currently but I expect to make it
  more advanced as time goes on.

- terraform state list command is introduced to list resources in a
  state. This can take a series of arguments to filter this down.

Known issues, or things that aren't done in this PR on purpose:

- Unit tests for terraform state list are on the way. Unit tests for the
  core changes are all there.
2016-05-10 14:49:14 -04:00
Mitchell Hashimoto e133452663 command/state: pattern => address 2016-05-10 14:14:48 -04:00
Mitchell Hashimoto d1b46e99bd Add `terraform state list` command
This introduces the terraform state list command to list the resources
within a state. This is the first of many state management commands to
come into 0.7.

This is the first command of many to come that is considered a
"plumbing" command within Terraform (see "plumbing vs porcelain":
http://git.661346.n2.nabble.com/what-are-plumbing-and-porcelain-td2190639.html).
As such, this PR also introduces a bunch of groundwork to support
plumbing commands.

The main changes:

- Main command output is changed to split "common" and "uncommon"
  commands.

- mitchellh/cli is updated to support nested subcommands, since
  terraform state list is a nested subcommand.

- terraform.StateFilter is introduced as a way in core to filter/search
  the state files. This is very basic currently but I expect to make it
  more advanced as time goes on.

- terraform state list command is introduced to list resources in a
  state. This can take a series of arguments to filter this down.

Known issues, or things that aren't done in this PR on purpose:

- Unit tests for terraform state list are on the way. Unit tests for the
  core changes are all there.
2016-05-10 14:14:47 -04:00