The Default values set by AWS were breaking the AWS ALB Listener Rule
tests. The stickiness parameter needed to be set to be Computed: true to
remove this discrepancy
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALBListenerRule_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/04/03 01:23:47 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALBListenerRule_basic -timeout 120m
=== RUN TestAccAWSALBListenerRule_basic
--- PASS: TestAccAWSALBListenerRule_basic (235.36s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 235.397s
```
It appears that #13232 doesn't work properly if you actually try to set any `parameter`s. Specifically, I was getting the following error:
```
* aws_db_parameter_group.test: 1 error(s) occurred:
* aws_db_parameter_group.test: Error modifying DB Parameter Group: InvalidParameterValue: The parameter DBParameterGroupName must be provided and must not be blank.
status code: 400, request id: 5783e396-17ff-11e7-87d5-e3fd4c7025ce
```
* provider/aws: New resource: aws_ses_domain_identity
Provide a resource to manage domain identities in SES. Exports the
verification_code attribute which can be used to add the TXT record to
the domain to complete the domain verification.
* provider/aws: Acceptance tests for aws_ses_domain_identity
* Resource aws_ses_domain_identity: Documentation update
Provide documentation for the new resource type.
GOPATH is actually a list of path and doesn't necessarily have to be
set. If unset it will default to $GOPATH/go in go 1.9+.
Assume that go install will install to the first path in the list.
Fixes: #9959
When we specify that we want an opsworks_instance state of running, we
should wait for that the be the case. This will then allow us to use the
Computed values (e.g. private_ip) etc and allow us to use provisioners
as part of the terraform config
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSOpsworksInstance'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/30 20:55:21 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSOpsworksInstance -timeout 120m
=== RUN TestAccAWSOpsworksInstance_importBasic
--- PASS: TestAccAWSOpsworksInstance_importBasic (72.28s)
=== RUN TestAccAWSOpsworksInstance
--- PASS: TestAccAWSOpsworksInstance (110.17s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 182.479s
```
Fixes: #8847
We actually didn't get the list of tags from the API, therefore, any
manual changes were not actually showing up in subsequent plans
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALBTargetGroup_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/30 15:45:53 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALBTargetGroup_basic -timeout 120m
=== RUN TestAccAWSALBTargetGroup_basic
--- PASS: TestAccAWSALBTargetGroup_basic (62.76s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 62.787s
```
Fixes: #13167
When changes to the target group were made via CLI or AWS Console, they
were not being picked up by terraform. This is because we were not
catching an error setting the `stickiness` parameters:
```
Error refreshing state: 1 error(s) occurred:
* aws_alb_target_group.test: aws_alb_target_group.test: stickiness.0.enabled: '' expected type 'bool', got unconvertible type 'string'
```
This meant that changes were not picked up in the following plan. The changes mean the following now:
```
~ aws_alb_target_group.test
stickiness.0.cookie_duration: "10440" => "10000"
stickiness.0.enabled: "false" => "true"
Plan: 0 to add, 1 to change, 0 to destroy.
```
* provider/triton: Move to joyent/triton-go
This commit moves the Triton provider to the new joyent/triton-go
library from gosdc. This has a number of advantages - not least that
requests can be signed using an SSH agent without having to keep
unencrypted key material in memory.
Schema has been maintained for all resources, and several tests have
been added and acceptance tests repaired - in some cases by fixing bugs
in the underlying resources.
After applying this patch, all acceptance tests pass:
```
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/30 13:48:33 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/triton -v -timeout 120m
=== RUN TestProvider
--- PASS: TestProvider (0.00s)
=== RUN TestProvider_impl
--- PASS: TestProvider_impl (0.00s)
=== RUN TestAccTritonFabric_basic
--- PASS: TestAccTritonFabric_basic (15.11s)
=== RUN TestAccTritonFirewallRule_basic
--- PASS: TestAccTritonFirewallRule_basic (1.48s)
=== RUN TestAccTritonFirewallRule_update
--- PASS: TestAccTritonFirewallRule_update (1.55s)
=== RUN TestAccTritonFirewallRule_enable
--- PASS: TestAccTritonFirewallRule_enable (1.52s)
=== RUN TestAccTritonKey_basic
--- PASS: TestAccTritonKey_basic (11.76s)
=== RUN TestAccTritonKey_noKeyName
--- PASS: TestAccTritonKey_noKeyName (11.20s)
=== RUN TestAccTritonMachine_basic
--- PASS: TestAccTritonMachine_basic (82.19s)
=== RUN TestAccTritonMachine_dns
--- PASS: TestAccTritonMachine_dns (173.36s)
=== RUN TestAccTritonMachine_nic
--- PASS: TestAccTritonMachine_nic (167.82s)
=== RUN TestAccTritonMachine_addNIC
--- PASS: TestAccTritonMachine_addNIC (192.11s)
=== RUN TestAccTritonMachine_firewall
--- PASS: TestAccTritonMachine_firewall (188.53s)
=== RUN TestAccTritonMachine_metadata
--- PASS: TestAccTritonMachine_metadata (614.57s)
=== RUN TestAccTritonVLAN_basic
--- PASS: TestAccTritonVLAN_basic (0.93s)
=== RUN TestAccTritonVLAN_update
--- PASS: TestAccTritonVLAN_update (1.50s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/triton 1463.621s
```
* provider/triton: Update docs for provider config
* deps: Vendor github.com/joyent/triton-go/...
* deps: Remove github.com/joyent/gosdc
Fixes: #13216
Prior to Terraform 0.9.2, we always set placement_strategies to
lowercase. Therefore, people using it in Terraform 0.9.2 are getting
continual diffs:
```
-/+ aws_ecs_service.mongo
cluster: "arn:aws:ecs:us-west-2:187416307283:cluster/terraformecstest1" => "arn:aws:ecs:us-west-2:187416307283:cluster/terraformecstest1"
deployment_maximum_percent: "200" => "200"
deployment_minimum_healthy_percent: "100" => "100"
desired_count: "1" => "1"
name: "mongodb" => "mongodb"
placement_strategy.#: "1" => "1"
placement_strategy.1676812570.field: "instanceid" => "" (forces new resource)
placement_strategy.1676812570.type: "spread" => "" (forces new resource)
placement_strategy.3946258308.field: "" => "instanceId" (forces new resource)
placement_strategy.3946258308.type: "" => "spread" (forces new resource)
task_definition: "arn:aws:ecs:us-west-2:187416307283:task-definition/mongodb:1991" => "arn:aws:ecs:us-west-2:187416307283:task-definition/mongodb:1991"
Plan: 1 to add, 0 to change, 1 to destroy.
```
This adds a DiffSuppression func to make sure this doesn't trigger a
ForceNew resource:
```
% terraform plan ✹ ✭
[WARN] /Users/stacko/Code/go/bin/terraform-provider-aws overrides an internal plugin for aws-provider.
If you did not expect to see this message you will need to remove the old plugin.
See https://www.terraform.io/docs/internals/internal-plugins.html
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but will not be
persisted to local or remote state storage.
aws_ecs_cluster.default: Refreshing state... (ID: arn:aws:e...ecstest1)
aws_ecs_task_definition.mongo: Refreshing state... (ID: mongodb)
aws_ecs_service.mongo: Refreshing state... (ID: arn:aws:e.../mongodb)
No changes. Infrastructure is up-to-date.
This means that Terraform did not detect any differences between your
configuration and real physical resources that exist. As a result, Terraform
doesn't need to do anything.
```
```
```
The plug-in crashes if "localNetworkGateways" is not found in the id parameter. The fix is to verify the parameter before proceeding.
Also the "import" example in the documentation is wrong, "localNetworkGateways" should be case sensitive. The current example actually causes the plugin to crash due to the bug.
* provider/aws: Add Support for maintenance_window and back_window to rds_cluster_instance
Fixes: #9489
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRDSClusterInstance_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/28 23:08:45 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRDSClusterInstance_basic -timeout 120m
=== RUN TestAccAWSRDSClusterInstance_basic
--- PASS: TestAccAWSRDSClusterInstance_basic (1433.41s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 1433.438s
```
* Update rds_cluster_instance.html.markdown
* Update rds_cluster_instance.html.markdown
It turns out if you're trying to write a config to conditionally restore
an instance from a snapshot, you end up painted into a corner with the
combination of `snapshot_identifier` and `name`.
You need `name` to be specified for DBs you're creating, but when
`snapshot_identifier` is populated you need it to be blank or else the
AWS API throws an error.
The logical next step is to drop a ternary in:
```tf
resource "aws_db_instance" "foo" {
# ...
snapshot_identifier = "${var.snap}"
name = "${var.snap != "" ? "" : var.dbname}"
}
```
**BUT** the above config will _replace_ the DB on subsequent runs as the
config basically has `name = ""` which will trigger a ForceNew diff once
the `name` is populated from the snapshot restore.
**SO** we can get a workable solution by actively avoiding populating
DBName when we're using one of the engines the docs explicitly mention.
It does not look like there are any tests covering `snapshot_identifer`,
so I'll subject this to some manual tests and follow up with some
results.
* provider/aws: Deprecate roles in favour of role in iam_instance_profile
You can only specify a single role to an IAM Instance Profile. So having
a slice of roles in the provider makes no sense. Therefore, we are going
to deprecate this infavour of `role`
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSIAMInstanceProfile_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/28 21:24:20 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSIAMInstanceProfile_ -timeout 120m
=== RUN TestAccAWSIAMInstanceProfile_importBasic
--- PASS: TestAccAWSIAMInstanceProfile_importBasic (25.08s)
=== RUN TestAccAWSIAMInstanceProfile_basic
--- PASS: TestAccAWSIAMInstanceProfile_basic (22.40s)
=== RUN TestAccAWSIAMInstanceProfile_withRoleNotRoles
--- PASS: TestAccAWSIAMInstanceProfile_withRoleNotRoles (22.63s)
=== RUN TestAccAWSIAMInstanceProfile_missingRoleThrowsError
--- PASS: TestAccAWSIAMInstanceProfile_missingRoleThrowsError (4.02s)
=== RUN TestAccAWSIAMInstanceProfile_namePrefix
--- PASS: TestAccAWSIAMInstanceProfile_namePrefix (22.18s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 96.349s
```
* Update iam_instance_profile.html.markdown
Fix an issue when upgrading from Terraform < 0.9 to 0.9+, when we added
support for the regional endpoints in OpsWorks Stacks. OpsWorks Stacks
can only be managed via the endpoint with which they were created, not
where the stack resides.
* provider/openstack: Add all_fixed_ips computed attribute to port resource
This commit adds the `all_fixed_ips` attribute to the
openstack_networking_port_v2 resource. This contains all of the port's
Fixed IPs returned by the Networking v2 API.
* provider/openstack: Revert Port fixed_ip back to a List
This commit reverts the changes made in a8c4e81a6e3f2. This
re-enables the ability to reference IP addresses using the
numerical-element notation.
This commit also makes fixed_ip a non-computed field, meaning
Terraform will no longer set fixed_ip with what was returned
by the API. This resolves the original issue about ordering.
The last use-case is for fixed_ips that received an IP address
via DHCP. Because fixed_ip is no longer computed, the DHCP IP
will not be set. The workaround for this use-case is to use the
new all_fixed_ips attribute.
In effect, users should use fixed_ip only as a way of inputting
data into Terraform and use all_fixed_ips as the output returned
by the API. If use-cases exist where fixed_ip can be used as an
output, that's a bonus feature.
This commit adds the all_metadata attribute which contains all
instance metadata returned from the OpenStack Compute API. This
is useful for gaining access to metadata which was applied
out of band of Terraform.
This commit also stops setting the original metadata attribute,
effectively making metadata an input and all_metadata the output
to reference all data from.
* Adding import to resource_aws_iam_server_certificate.
* provider/aws: Update tests for import of aws_iam_server_certificate
Builds upon the work of @mrcopper in #12940
Resource:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSIAMServerCertificate_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/25 00:08:48 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSIAMServerCertificate_ -timeout 120m
=== RUN TestAccAWSIAMServerCertificate_importBasic
--- PASS: TestAccAWSIAMServerCertificate_importBasic (22.81s)
=== RUN TestAccAWSIAMServerCertificate_basic
--- PASS: TestAccAWSIAMServerCertificate_basic (19.68s)
=== RUN TestAccAWSIAMServerCertificate_name_prefix
--- PASS: TestAccAWSIAMServerCertificate_name_prefix (19.88s)
=== RUN TestAccAWSIAMServerCertificate_disappears
--- PASS: TestAccAWSIAMServerCertificate_disappears (13.94s)
=== RUN TestAccAWSIAMServerCertificate_file
--- PASS: TestAccAWSIAMServerCertificate_file (32.67s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 109.062s
```
Data Source:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDataSourceIAMServerCertificate_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/25 13:07:10 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSDataSourceIAMServerCertificate_ -timeout 120m
=== RUN TestAccAWSDataSourceIAMServerCertificate_basic
--- PASS: TestAccAWSDataSourceIAMServerCertificate_basic (43.86s)
=== RUN TestAccAWSDataSourceIAMServerCertificate_matchNamePrefix
--- PASS: TestAccAWSDataSourceIAMServerCertificate_matchNamePrefix (2.68s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 46.569s
```
Updates `aws_caller_identity` data source to actually include the correct attributes from the `GetCallerIdentity` API function.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSCallerIdentity_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/27 09:26:13 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSCallerIdentity_basic -timeout 120m
=== RUN TestAccAWSCallerIdentity_basic
--- PASS: TestAccAWSCallerIdentity_basic (12.74s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 12.767s
```
In function `resourceAwsSesReceiptRuleRead` the position of the receipt
rules in the rule set was taken directly from the index of the rule's
position in the slice returned by the AWS API call. As the slice is
zero-based and the ruleset is one-based, this results in an incorrect
representation.
This manifests as `aws_ses_receipt_rule` resources always showing a
diff during plan or apply.
Allow to resize a droplet permanently (i.e. apply disk resize)
if previously it was resized temporarily (CPU and RAM only).
Fixes: #13007
```
$ make testacc TEST=./builtin/providers/digitalocean TESTARGS='-run=TestAccDigitalOceanDroplet_ResizeOnlyDisk'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/25 03:54:23 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/digitalocean -v -run=TestAccDigitalOceanDroplet_ResizeOnlyDisk -timeout 120m
=== RUN TestAccDigitalOceanDroplet_ResizeOnlyDisk
--- PASS: TestAccDigitalOceanDroplet_ResizeOnlyDisk (198.62s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/digitalocean 198.638s
```
according to the official scaleway support, requests within the same session can
not be parallelized.
While I do not know for sure that this is a write-only limitation, I've
implemented it as a write-only limitation for now.
Previously requests like this would produce a 500 internal server error:
```
resource "scaleway_ip" "test_ip" {
count = 2
}
```
now this limitation should be lifted, for all scaleway resources
The OS_DEBUG feature has worked out great, but frequent logging of
the service catalog during client initialization can make logging
very chatty. This commit omits the service catalog in the logs.
This commit deprecates the floating_ip attributes from the
openstack_compute_instance_v2 resource. It is recommended to use
either the openstack_compute_floatingip_associate resource or
configure an openstack_networking_port_v2 resource with a floating
IP.
This commit deprecates the volume attribute in the
openstack_compute_instance_v2 resource. It's recommended to either
use the block_device attribute or the openstack_compute_volume_attach_v2
resource.
* Add the `consul` check type to the `circonus_check` resource.
* Fix a tab-complete fail.
`Parse` != `Path`, but lexically close.
* Dept of 2nd thoughts: `s/service_name/service/g`
same
Fixes: #13012
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSNetworkAclRule_allProtocol'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/24 18:42:05 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSNetworkAclRule_allProtocol -timeout 120m
=== RUN TestAccAWSNetworkAclRule_allProtocol
--- PASS: TestAccAWSNetworkAclRule_allProtocol (53.95s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 53.974s
```
Fixes: #13035
It was pointed out in the issue that the addition of a new parameter
with a default value AND a ForceNew: true is causing Terraform to try
and recreate the VPC
This PR migrates the state to add the default value of false for `assign_generated_ipv6_cidr_block`
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAWSVpcMigrateState'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/24 12:51:41 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAWSVpcMigrateState -timeout 120m
=== RUN TestAWSVpcMigrateState
2017/03/24 12:52:26 [INFO] Found AWS VPC State v0; migrating to v1
2017/03/24 12:52:26 [DEBUG] Attributes before migration: map[string]string{"assign_generated_ipv6_cidr_block":"true"}
2017/03/24 12:52:26 [DEBUG] Attributes after migration: map[string]string{"assign_generated_ipv6_cidr_block":"false"}
2017/03/24 12:52:26 [INFO] Found AWS VPC State v0; migrating to v1
2017/03/24 12:52:26 [DEBUG] Attributes before migration: map[string]string{}
2017/03/24 12:52:26 [DEBUG] Attributes after migration: map[string]string{"assign_generated_ipv6_cidr_block":"false"}
--- PASS: TestAWSVpcMigrateState (0.00s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 0.024s
```
AWS API requires ECS placement strategies "field" attribute to be
"memory" or "cpu" (lowercase) when type=bin, but these read back as
"MEMORY" and "CPU" (uppercase) respectively.
PR #11565 (which fixed separately reported #11644) deals with this by
always lowering the case of the resource received from the API, but this
breaks for other "field" values (e.g. "instanceId" -> "instanceid").
This PR only lowers the case of the returned resource when field
"MEMORY" or "CPU". Haven't checked if any other fields need this
treatment.
Updates the `data_source_route53_zone` acceptance test to better handle parallel runs. Also better handles tests that potentially leak resources by adding a random integer suffix to domain names.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRolePolicyAttachment_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/22 20:18:05 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRolePolicyAttachment_basic -timeout 120m
=== RUN TestAccAWSRolePolicyAttachment_basic
--- PASS: TestAccAWSRolePolicyAttachment_basic (31.94s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 31.949s
```
* provider/ns1: Ensure provider checks for credentials
* provider/ns1: stick with GetOk for provider config vars
* provider/ns1: NS1 go client fixes for handling http errors
* provider/github: add repository_webhook resource
`repository_webhook` can be used to manage webhooks for repositories.
It is currently limited to organization repositories only.
The changeset includes both documentation and tests.
The tests are green:
```
make testacc TEST=./builtin/providers/github
TESTARGS='-run=TestAccGithubRepositoryWebhook_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/21 16:20:07 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/github -v
-run=TestAccGithubRepositoryWebhook_basic -timeout 120m
=== RUN TestAccGithubRepositoryWebhook_basic
--- PASS: TestAccGithubRepositoryWebhook_basic (5.10s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/github 5.113s
```
* provider/github: add github_organization_webhook
the `github_organization_webhook` resource is similar to the
`github_repository_webhook` resource, but it manages webhooks for an
organization.
the tests are green:
```
make testacc TEST=./builtin/providers/github
TESTARGS='-run=TestAccGithubOrganizationWebhook'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/21 17:23:33 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/github -v
-run=TestAccGithubOrganizationWebhook -timeout 120m
=== RUN TestAccGithubOrganizationWebhook_basic
--- PASS: TestAccGithubOrganizationWebhook_basic (2.09s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/github 2.109s
```
Fixes: #12764
AWS ALB Allows the Subnets to be changed using the SetSubnets func -
previously we set ForceNew: true on this change
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSALB_' ✭
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/18 16:55:52 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSALB_ -timeout 120m
=== RUN TestAccAWSALB_basic
--- PASS: TestAccAWSALB_basic (342.95s)
=== RUN TestAccAWSALB_generatedName
--- PASS: TestAccAWSALB_generatedName (362.05s)
=== RUN TestAccAWSALB_namePrefix
--- PASS: TestAccAWSALB_namePrefix (311.21s)
=== RUN TestAccAWSALB_tags
--- PASS: TestAccAWSALB_tags (344.05s)
=== RUN TestAccAWSALB_updatedSecurityGroups
--- PASS: TestAccAWSALB_updatedSecurityGroups (515.61s)
=== RUN TestAccAWSALB_updatedSubnets
--- PASS: TestAccAWSALB_updatedSubnets (313.94s)
=== RUN TestAccAWSALB_noSecurityGroup
--- PASS: TestAccAWSALB_noSecurityGroup (293.54s)
=== RUN TestAccAWSALB_accesslogs
--- PASS: TestAccAWSALB_accesslogs (492.01s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 2975.402s
```
Fixes: #12895
The AWS API returns both dissociated and associated IPv6 CIDRs. The UI
only returns the associated. Therefore, the assumption was made that we
would always take the 1st association in the set to use for state
We now loop over the set and look for the associated IPv6 CIDR before
using that in state
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSVpc_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/20 21:21:02 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSVpc_ -timeout 120m
=== RUN TestAccAWSVpc_importBasic
--- PASS: TestAccAWSVpc_importBasic (65.91s)
=== RUN TestAccAWSVpc_basic
--- PASS: TestAccAWSVpc_basic (50.88s)
=== RUN TestAccAWSVpc_enableIpv6
--- PASS: TestAccAWSVpc_enableIpv6 (49.89s)
=== RUN TestAccAWSVpc_dedicatedTenancy
--- PASS: TestAccAWSVpc_dedicatedTenancy (50.59s)
=== RUN TestAccAWSVpc_tags
--- PASS: TestAccAWSVpc_tags (98.89s)
=== RUN TestAccAWSVpc_update
--- PASS: TestAccAWSVpc_update (93.46s)
=== RUN TestAccAWSVpc_bothDnsOptionsSet
--- PASS: TestAccAWSVpc_bothDnsOptionsSet (20.71s)
=== RUN TestAccAWSVpc_DisabledDnsSupport
--- PASS: TestAccAWSVpc_DisabledDnsSupport (49.55s)
=== RUN TestAccAWSVpc_classiclinkOptionSet
--- PASS: TestAccAWSVpc_classiclinkOptionSet (54.92s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 534.829s
```
Leaked resources may prevent this resource from correctly passing acceptance tests. Seeding the policy names with random integer suffixes allows tests to pass regardless of resource leaks.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRolePolicyAttachment_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/22 19:58:58 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRolePolicyAttachment_basic -timeout 120m
=== RUN TestAccAWSRolePolicyAttachment_basic
--- PASS: TestAccAWSRolePolicyAttachment_basic (31.98s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 31.989s
```
* provider/aws: Increase AMI destroy timeout
Acceptance tests were timing out on AMI destroy, should alleviate the problem.
* Further increase timeout, cleanup test
* use function instead of printf
Updates the IAM Group Policy and IAM User Policy acceptance tests with random integer seeds.
Currently acceptance tests for these two resources are failing from leaked resources, adding distint naming should allow tests to pass regardless of parallel tests being ran or any resource leaks.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSIAMUserPolicy'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/22 00:19:13 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSIAMUserPolicy -timeout 120m
=== RUN TestAccAWSIAMUserPolicy_basic
--- PASS: TestAccAWSIAMUserPolicy_basic (22.54s)
=== RUN TestAccAWSIAMUserPolicy_namePrefix
--- PASS: TestAccAWSIAMUserPolicy_namePrefix (12.49s)
=== RUN TestAccAWSIAMUserPolicy_generatedName
--- PASS: TestAccAWSIAMUserPolicy_generatedName (13.13s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 48.191s
```
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSIAMGroupPolicy'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/22 00:24:08 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSIAMGroupPolicy -timeout 120m
=== RUN TestAccAWSIAMGroupPolicy_basic
--- PASS: TestAccAWSIAMGroupPolicy_basic (23.89s)
=== RUN TestAccAWSIAMGroupPolicy_namePrefix
--- PASS: TestAccAWSIAMGroupPolicy_namePrefix (12.07s)
=== RUN TestAccAWSIAMGroupPolicy_generatedName
--- PASS: TestAccAWSIAMGroupPolicy_generatedName (13.15s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 49.140s
```
machines
Fixes: #12898
The way aws_instance works is that we call the Create func then the
Update func then the Read func. The way the work to implement the change
to iam_instance_profile was added meant that when a machine was created
with an iam_instance_profile, it would then try and update that
iam_instance_profile because the state hadn't been updated at that point
We have changed the Update func to only check for the change to
iam_instance_profile when it *is an existing machine* - this will solve
the problem of those bringing up new machines and getting hit with the
permissions error
As requested, added a test that adds an IAM Instance Profile from
creation
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSInstance_withIamInstanceProfile'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/21 17:51:32 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSInstance_withIamInstanceProfile -timeout 120m
=== RUN TestAccAWSInstance_withIamInstanceProfile
--- PASS: TestAccAWSInstance_withIamInstanceProfile (154.29s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 154.325s
```
* add option zone_id
- Ref: http://docs.idcf.jp/cloud/api/address/#listpublicipaddresses
* Exclusion of `network_id`, `vpc_id` and `zone_id`
* Revert "Exclusion of `network_id`, `vpc_id` and `zone_id`"
This reverts commit 9684c8b0b65b3353aea4e0bfbeaf21986282812b.
* remove zone_id from one of required option.
Adds support for `name_prefix` to the `aws_autoscaling_group` and `aws_elb` resources. Unfortunately when using `name_prefix` with `aws_elb`, this means that the specified prefix can only be a maximum of 6 characters in length. This is because the maximum length for an ELB name is 32 characters, and `resource.PrefixedUniqueId` generates a 26-character unique identifier. I was considering truncating the unique identifier to allow for a longer `name_prefix`, but I worried that doing so would increase the risk of collisions.
* Allow priority attribute of dnsimple_record to be set
Some DNS record types (like MX) allow a priority to specified, and the
ability to do so is important in many environments.
This diff will change dnsimple_record.priority from computed to
optional, allowing it to be used in terraform configs like so:
resource "dnsimple_record" "mx1" {
domain = "example.com"
name = ""
value = "mx1.example.com"
type = "MX"
priority = "1"
}
resource "dnsimple_record" "mx2" {
domain = "example.com"
name = ""
value = "mx2.example.com"
type = "MX"
priority = "2"
}
* mention new priority attribute of dnsimple_record
* add acceptance specs for creating/updating MX records at dnsimple
* Vendor update `github.com/circonus-labs/circonus-gometrics`
* Add the `statsd` check type to the `circonus_check` resource.
* Noop change: Alpha-sort members of maps, variables, and docs.
This will make it possible/easier to make decisions based on supported EC2 platforms (VPC and/or EC2 Classic)
in the context of any AWS resource which needs make such decisions.
Fixes: #12752
Weight was replaced with weighted_routing_policy in June 2016. But for
some reason we were still doing the following in the Read func:
```
d.Set("weight", -1)
```
As this field was removed, we shouldn't be setting it to state
Adds plan-level validation for both IPv4 and IPv6 CIDR Blocks in an AWS SecurityGroup resource, as well as the AWS Security Group Rule resource.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSSecurityGroup_invalidCIDRBlock'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/16 11:32:54 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSSecurityGroup_invalidCIDRBlock -timeout 120m
=== RUN TestAccAWSSecurityGroup_invalidCIDRBlock
--- PASS: TestAccAWSSecurityGroup_invalidCIDRBlock (0.01s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 0.017s
```
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSSecurityGroupRule_ExpectInvalidCIDR'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/16 11:46:21 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSSecurityGroupRule_ExpectInvalidCIDR -timeout 120m
=== RUN TestAccAWSSecurityGroupRule_ExpectInvalidCIDR
--- PASS: TestAccAWSSecurityGroupRule_ExpectInvalidCIDR (0.01s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 0.016s
```
Previously the check for if we are setting `CidrBlock` or `IPv6CidrBlock` during an `Update` of the `aws_network_acl` resource would populate the input struct with a nil string value `""`. This caused our acceptance tests to fail, and broke the resource's functionality if a user only set `CidrBlock` or `IPv6CidrBlock` for either an `ingress` or `egress` rule as the API would error out with an `Invalid CidrBlock` error.
Previously:
```
aws_network_acl.bond: Error creating egress entry: InvalidParameterValue: CIDR block is malformed
status code: 400, request id: 0620e0b7-4e30-4c14-9a7a-5d373cc9f33b
```
Currently:
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSNetworkAcl'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/15 15:41:17 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSNetworkAcl -timeout 120m
=== RUN TestAccAWSNetworkAcl_importBasic
--- PASS: TestAccAWSNetworkAcl_importBasic (26.96s)
=== RUN TestAccAWSNetworkAclRule_basic
--- PASS: TestAccAWSNetworkAclRule_basic (23.08s)
=== RUN TestAccAWSNetworkAclRule_ipv6
--- PASS: TestAccAWSNetworkAclRule_ipv6 (26.24s)
=== RUN TestAccAWSNetworkAcl_EgressAndIngressRules
--- PASS: TestAccAWSNetworkAcl_EgressAndIngressRules (25.11s)
=== RUN TestAccAWSNetworkAcl_OnlyIngressRules_basic
--- PASS: TestAccAWSNetworkAcl_OnlyIngressRules_basic (31.82s)
=== RUN TestAccAWSNetworkAcl_OnlyIngressRules_update
--- PASS: TestAccAWSNetworkAcl_OnlyIngressRules_update (48.59s)
=== RUN TestAccAWSNetworkAcl_OnlyEgressRules
--- PASS: TestAccAWSNetworkAcl_OnlyEgressRules (25.48s)
=== RUN TestAccAWSNetworkAcl_SubnetChange
--- PASS: TestAccAWSNetworkAcl_SubnetChange (57.12s)
=== RUN TestAccAWSNetworkAcl_Subnets
--- PASS: TestAccAWSNetworkAcl_Subnets (67.55s)
=== RUN TestAccAWSNetworkAcl_ipv6Rules
--- PASS: TestAccAWSNetworkAcl_ipv6Rules (31.52s)
=== RUN TestAccAWSNetworkAcl_espProtocol
acc--- PASS: TestAccAWSNetworkAcl_espProtocol (24.37s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 387.855s
```
This was already marked as removed, but the way the provider handled it,
people were still being prompted for input anyways. This removes it from
the provider entirely, so people won't be prompted for input.
* Revert "datadog: Fix incorrect schema of monitor for 'silenced' (#12720)"
This reverts commit 8730bf125f.
* Revert "schema: Allow *Resource as Elem of TypeMap in validation (#12722)"
This reverts commit 1df1c21d5b.
* Revert "provider/alicloud: change create ecs postpaid instance API (#12226)"
This reverts commit ffc5a06cb5.
when creating IPs concurrently the Scaleway API starts to return 500 internal
server errors.
since the error goes away when limiting concurrent requests, as well as the fact that the golang net/http client is safe for concurrent use,
I'm assuming this is an API error on Scaleways side.
this CS introduces a workaround so terraform does not crash for now.
the work around needs to be removed once Scaleway fixes their API
Fixes: #11824
A full set of acceptance tests for *all* OpsWorks tests are below. There is a single issue, opsworks_instance isn't ordering the layer_ids so it's non-deterministic which can come back. This introduces a false positive.
The opsworks tests are running both against us-east-1 for some and us-west-2 for others. This must be marked as a backwards incompatibility in 0.9 just incase people are using the opsworks region parameter to try and override the provider region
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSOpsworksApplication' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/14 17:11:36 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSOpsworksApplication -timeout 120m
=== RUN TestAccAWSOpsworksApplication
--- PASS: TestAccAWSOpsworksApplication (164.29s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 164.319s
```
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSOpsworksCustomLayer' ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/14 17:16:18 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSOpsworksCustomLayer -timeout 120m
=== RUN TestAccAWSOpsworksCustomLayerImportBasic
--- PASS: TestAccAWSOpsworksCustomLayerImportBasic (105.98s)
=== RUN TestAccAWSOpsworksCustomLayer
--- PASS: TestAccAWSOpsworksCustomLayer (92.68s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 198.684s
```
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSOpsworksPermission' ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/14 17:23:28 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSOpsworksPermission -timeout 120m
=== RUN TestAccAWSOpsworksPermission
--- PASS: TestAccAWSOpsworksPermission (226.36s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 226.386s
```
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSOpsworksRailsAppLayer' ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/14 17:28:01 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSOpsworksRailsAppLayer -timeout 120m
=== RUN TestAccAWSOpsworksRailsAppLayer
--- PASS: TestAccAWSOpsworksRailsAppLayer (129.39s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 129.426s
```
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSOpsworksUserProfile' ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/14 17:37:46 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSOpsworksUserProfile -timeout 120m
=== RUN TestAccAWSOpsworksUserProfile
--- PASS: TestAccAWSOpsworksUserProfile (42.60s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 42.624s
```
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSOpsworksStack' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/14 18:00:50 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSOpsworksStack -timeout 120m
=== RUN TestAccAWSOpsworksStackImportBasic
--- PASS: TestAccAWSOpsworksStackImportBasic (50.28s)
=== RUN TestAccAWSOpsworksStackNoVpc
--- PASS: TestAccAWSOpsworksStackNoVpc (25.92s)
=== RUN TestAccAWSOpsworksStackVpc
--- PASS: TestAccAWSOpsworksStackVpc (76.80s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 153.025s
```
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSOpsworksRdsDbInstance' ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/14 17:38:36 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSOpsworksRdsDbInstance -timeout 120m
=== RUN TestAccAWSOpsworksRdsDbInstance
--- PASS: TestAccAWSOpsworksRdsDbInstance (916.15s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 916.177s
```
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSOpsworksInstance' 2 ↵
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/14 17:26:45 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSOpsworksInstance -timeout 120m
=== RUN TestAccAWSOpsworksInstance_importBasic
--- PASS: TestAccAWSOpsworksInstance_importBasic (85.52s)
=== RUN TestAccAWSOpsworksInstance
--- FAIL: TestAccAWSOpsworksInstance (114.09s)
testing.go:268: Step 1 error: After applying this step, the plan was not empty:
DIFF:
UPDATE: aws_opsworks_instance.tf-acc
layer_ids.0: "4c29b76f-df72-409e-a5c4-9459b7d9b4a4" => "a4a859cf-2a07-447e-a151-a97a6d827db7"
layer_ids.1: "a4a859cf-2a07-447e-a151-a97a6d827db7" => "4c29b76f-df72-409e-a5c4-9459b7d9b4a4"
FAIL
exit status 1
FAIL github.com/hashicorp/terraform/builtin/providers/aws 199.643s
make: *** [testacc] Error 1
```
Fixes the two failing aws_ami acceptance tests, by polling until the AMI is deleted before exiting.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSAMI_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/14 16:03:26 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSAMI_basic -timeout 120m
=== RUN TestAccAWSAMI_basic
--- PASS: TestAccAWSAMI_basic (43.98s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 43.989s
```
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSAMI_snapshotSize'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/14 16:07:29 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSAMI_snapshotSize -timeout 120m
=== RUN TestAccAWSAMI_snapshotSize
--- PASS: TestAccAWSAMI_snapshotSize (28.64s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 28.654s
```
* Add rancher_host resource type
This adds a rancher_host resource type.
For now, the goal is to detect if the host already exists,
so that it can be purged cleanly when the host is deprovisioned.
The typical use is to create both an instance (e.g. aws_instance)
and a rancher_host resources with the same hostname. The rancher_host
resource will detect when the agent has registered itself.
When removing the host, both the instance and the rancher_host
resources can be removed, ensuring the host is purged from Rancher.
In future versions, this could support creating hosts as well.
* Use ro_labels to avoid removing internal Rancher labels
As reported in https://github.com/rancher/rancher/issues/8165
* Do not ForceNew on environment_id
Allows the ssh-key test to pass when ran in parallel with different branches.
```
$ make testacc TEST=./builtin/providers/packet TESTARGS='-run=TestAccPacketSSHKey_Basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/14 11:10:28 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/packet -v -run=TestAccPacketSSHKey_Basic -timeout 120m
=== RUN TestAccPacketSSHKey_Basic
PASS
ok github.com/hashicorp/terraform/builtin/providers/packet 3.503s
```
We're providing a local test server for the consul backends, so we might
as well use it to make the provider acceptance tests more relible as
well.
TODO: the TLS test doesn't actualy test anything other than the Config.
The tests have been modified to make it apparent that they aren't
connecting to the server at all.
If LBaaSV2 member creation/deletion is attempted while LB resource is
busy (for example it's in PENDING_UPDATE state), Neutron will return 500
error. Currently This being caught by type assertion to
ErrUnexpectedResponseCode, however error 500 has a dedicated type
ErrDefault500, which makes the current type assertion to miss it and
eventually the error slips out through the check. This patch
changes the type assertion to explicitly check for ErrDefault500.
Also similar check has been added when member is deleted.
When specifying a single port in port_range, the API would accept it as
input, but would return it as {PORT}-{PORT}. Terraform would then see
this as different, even though (semantically) it's the same.
This commit adds a test that exposes the diff cycle created by this, and
an inline DiffSuppressFunc to resolve it.
Fixes#9051.
* Make our regexes more permissive (though still separated out for
readability, despite being identical)
* Add a helper that will improve readability while sanity testing our
regex results.
* Add Fastly SSL validation fields
The ssl_hostname field has been deprecated by Fastly. Instead the new
standard is to use the ssl_cert_hostname and ssl_sni_hostname fields:
- ssl_cert_hostname: Used only for certificate verification.
- ssl_sni_hostname: Used only for SNI in the handshake.
Add these fields to the backend block to better support SSL services.
* Add deprecation notice for ssl_hostname
If the user_arn changes on the user_profile resource we should delete it and recreate it
instead of attempting to modify it incorrectly and causing the terraform apply to fail.
I also added an acceptance test that will trigger this case.
Fixes: #12599
Before this patch:
```
% terraform plan
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but will not be
persisted to local or remote state storage.
aws_iam_saml_provider.salesforce: Refreshing state... (ID: arn:aws:i...rce-test)
Error refreshing state: 1 error(s) occurred:
* aws_iam_saml_provider.salesforce: aws_iam_saml_provider.salesforce: NoSuchEntity: Manifest not found for arn arn:aws:iam::187416307283:saml-provider/tf-salesforce-test
status code: 404, request id: fc32c7f8-0631-11e7-8e1f-29a8c10edf64
```
After this patch:
```
% terraform plan ✚ ✭
[WARN] /Users/stacko/Code/go/bin/terraform-provider-aws overrides an internal plugin for aws-provider.
If you did not expect to see this message you will need to remove the old plugin.
See https://www.terraform.io/docs/internals/internal-plugins.html
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but will not be
persisted to local or remote state storage.
aws_iam_saml_provider.salesforce: Refreshing state... (ID: arn:aws:i...rce-test)
The Terraform execution plan has been generated and is shown below.
Resources are shown in alphabetical order for quick scanning. Green resources
will be created (or destroyed and then created if an existing resource
exists), yellow resources are being changed in-place, and red resources
will be destroyed. Cyan entries are data sources to be read.
Note: You didn't specify an "-out" parameter to save this plan, so when
"apply" is called, Terraform can't guarantee this is what will execute.
+ aws_iam_saml_provider.salesforce
arn: "<computed>"
name: "tf-salesforce-test"
```
As part of the new changes to the DNSimple provider, we changed to use
the new API version. This requires a token and *not* email address
In order for backwards compatibility - we kept the email address in the
schema but we had the default as nil, meaning that Terraform was
prompting the user for it, they would enter it, then Terraform would
error out due to using a combination of token and email address
This commit makes the default email address an empty String. This means
we don't prompt the user
This commit changes the openstack_networking_port_v2 fixed_ip
parameter from a List to a Set. This is because OpenStack does not
preserve the original ordering of the fixed IPs.
* provider/openstack: Set Availability Zone in Instances
This commit configures the openstack_compute_instance_v2 resource
to set the Availability Zone of the instance resource.
* vendor: Updating Gophercloud for OpenStack
* Begin stubbing out the Circonus provider.
* Remove all references to `reverse:secret_key`.
This value is dynamically set by the service and unused by Terraform.
* Update the `circonus_check` resource.
Still a WIP.
* Add docs for the `circonus_check` resource.
Commit miss, this should have been included in the last commit.
* "Fix" serializing check tags
I still need to figure out how I can make them order agnostic w/o using
a TypeSet. I'm worried that's what I'm going to have to do.
* Spike a quick circonus_broker data source.
* Convert tags to a Set so the order does not matter.
* Add a `circonus_account` data source.
* Correctly spell account.
Pointed out by: @postwait
* Add the `circonus_contact_group` resource.
* Push descriptions into their own file in order to reduce the busyness of the schema when reviewing code.
* Rename `circonus_broker` and `broker` to `circonus_collector` and `collector`, respectively.
Change made with concent by Circonus to reduce confusion (@postwait, @maier, and several others).
* Use upstream contsants where available.
* Import the latest circonus-gometrics.
* Move to using a Set of collectors vs a list attached to a single attribute.
* Rename "cid" to "id" in the circonus_account data source and elsewhere
where possible.
* Inject a tag automatically. Update gometrics.
* Checkpoint `circonus_metric` resource.
* Enable provider-level auto-tagging. This is disabled by default.
* Rearrange metric. This is an experimental "style" of a provider. We'll see.
That moment. When you think you've gone off the rails on a mad scientist
experiment but like the outcome and think you may be onto something but
haven't proven it to yourself or anyone else yet? That. That exact
feeling of semi-confidence while being alone in the wilderness. Please
let this not be the Terraform provider equivalent of DJB's C style of
coding.
We'll know in another resource or two if this was a horrible mistake or
not.
* Begin moving `resource_circonus_check` over to the new world order/structure:
Much of this is WIP and incomplete, but here is the new supported
structure:
```
variable "used_metric_name" {
default = "_usage`0`_used"
}
resource "circonus_check" "usage" {
# collectors = ["${var.collectors}"]
collector {
id = "${var.collectors[0]}"
}
name = "${var.check_name}"
notes = "${var.notes}"
json {
url = "https://${var.target}/account/current"
http_headers = {
"Accept" = "application/json"
"X-Circonus-App-Name" = "TerraformCheck"
"X-Circonus-Auth-Token" = "${var.api_token}"
}
}
stream {
name = "${circonus_metric.used.name}"
tags = "${circonus_metric.used.tags}"
type = "${circonus_metric.used.type}"
}
tags = {
source = "circonus"
}
}
resource "circonus_metric" "used" {
name = "${var.used_metric_name}"
tags = {
source = "circonus"
}
type = "numeric"
}
```
* Document the `circonus_metric` resource.
* Updated `circonus_check` docs.
* If a port was present, automatically set it in the Config.
* Alpha sort the check parameters now that they've been renamed.
* Fix a handful of panics as a result of the schema changing.
* Move back to a `TypeSet` for tags. After a stint with `TypeMap`, move
back to `TypeSet`.
A set of strings seems to match the API the best. The `map` type was
convenient because it reduced the amount of boilerplate, but you loose
out on other things. For instance, tags come in the form of
`category:value`, so naturally it seems like you could use a map, but
you can't without severe loss of functionality because assigning two
values to the same category is common. And you can't normalize map
input or suppress the output correctly (this was eventually what broke
the camel's back). I tried an experiment of normalizing the input to be
`category:value` as the key in the map and a value of `""`, but... seee
diff suppress. In this case, simple is good.
While here bring some cleanups to _Metric since that was my initial
testing target.
* Rename `providerConfig` to `_ProviderConfig`
* Checkpoint the `json` check type.
* Fix a few residual issues re: missing descriptions.
* Rename `validateRegexp` to `_ValidateRegexp`
* Use tags as real sets, not just a slice of strings.
* Move the DiffSuppressFunc for tags down to the Elem.
* Fix up unit tests to chase the updated, default hasher function being used.
* Remove `Computed` attribute from `TypeSet` objects.
This fixes a pile of issues re: update that I was having.
* Rename functions.
`GetStringOk` -> `GetStringOK`
`GetSetAsListOk` -> `GetSetAsListOK`
`GetIntOk` -> `GetIntOK`
* Various small cleanups and comments rolled into a single commit.
* Add a `postgresql` check type for the `circonus_check` resource.
* Rename various validator functions to be _CapitalCase vs capitalCase.
* Err... finish the validator renames.
* Add `GetFloat64()` support.
* Add `icmp_ping` check type support.
* Catch up to the _API*Attr renames.
Deliberately left out of the previous commit in order to create a clean
example of what is required to add a new check type to the
`circonus_check` resource.
* Clarify when the `target` attribute is required for the `postgresql`
check type.
* Correctly pull the metric ID attribute from the right location.
* Add a circonus_stream_group resource (a.k.a. a Circonus "metric cluster")
* Add support for the [`caql`](https://login.circonus.com/user/docs/caql_reference) check type.
* Add support for the `http` check type.
* `s/SSL/TLS/g`
* Add support for `tcp` check types.
* Enumerate the available metrics that are supported for each check type.
* Add [`cloudwatch`](https://login.circonus.com/user/docs/Data/CheckTypes/CloudWatch) check type support.
* Add a `circonus_trigger` resource (a.k.a Circonus Ruleset).
* Rename a handful of functions to make it clear in the function name the
direction of flow for information moving through the provider.
TL;DR: Replace `parse` and `read` with "foo to bar"-like names.
* Fix the attribute name used in a validator. Absent != After.
* Set the minimum `absent` predicate to 70s per testing.
* Fix the regression tests for circonus_trigger now that absent has a 70s min
* Fix up the `tcp` check to require a `host` attribute.
Fix tests. It's clear I didn't run these before committing/pushing the
`tcp` check last time.
* Fix `circonus_check` for `cloudwatch` checks.
* Rename `parsePerCheckTypeConfig()` to `_CheckConfigToAPI` to be
consistent with other function names.
grep(1)ability of code++
* Slack buttons as an integer are string encoded.
* Fix updates for `circonus_contact`.
* Fix the out parameters for contact groups.
* Move to using `_CastSchemaToTF()` where appropriate.
* Fix circonus_contact_group. Updates work as expected now.
* Use `_StateSet()` in place of `d.Set()` everywhere.
* Make a quick pass over the collector datasource to modernize its style
* Quick pass for items identified by `golint`.
* Fix up collectors
* Fix the `json` check type.
Reconcile possible sources of drift. Update now works as expected.
* Normalize trigger durations to seconds.
* Improve the robustness of the state handling for the `circonus_contact_group` resource.
* I'm torn on this, but sort the contact groups in the notify list.
This does mean that if the first contact group in the list has a higher
lexical sort order the plan won't converge until the offending resource
is tainted and recreated. But there's also some sorting happening
elsewhere, so.... sort and taint for now and this will need to be
revisited in the future.
* Add support for the `httptrap` check type.
* Remove empty units from the state file.
* Metric clusters can return a 404. Detect this accordingly in its
respective Exists handler.
* Add a `circonus_graph` resource.
* Fix a handful of bugs in the graph provider.
* Re-enable the necessary `ConflictsWith` definitions and normalize attribute names.
* Objects that have been deleted via the UI return a 404. Handle in Exists().
* Teach `circonus_graph`'s Stack set to accept nil values.
* Set `ForceNew: true` for a graph's name.
* Chase various API fixes required to make `circonus_graph` work as expected.
* Fix up the handling of sub-1 zoom resolutions for graphs.
* Add the `check_by_collector` out parameter to the `circonus_check` resource.
* Improve validation of line vs area graphs. Fix graph_style.
* Fix up the `logarithmic` graph axis option.
* Resolve various trivial `go vet` issues.
* Add a stream_group out parameter.
* Remove incorrectly applied `Optional` attributes to the `circonus_account` resource.
* Remove various `Optional` attributes from the `circonus_collector` data source.
* Centralize the common need to suppress leading and trailing whitespace into `suppressWhitespace`.
* Sync up with upstream vendor fixes for circonus_graph.
* Update the checksum value for the http check.
* Chase `circonus_graph`'s underlying `line_style` API object change from `string` to `*string`.
* Clean up tests to use a generic terraform regression testing account.
* Add support for the MySQL to the `circonus_check` resource.
* Begin stubbing out the Circonus provider.
* Remove all references to `reverse:secret_key`.
This value is dynamically set by the service and unused by Terraform.
* Update the `circonus_check` resource.
Still a WIP.
* Add docs for the `circonus_check` resource.
Commit miss, this should have been included in the last commit.
* "Fix" serializing check tags
I still need to figure out how I can make them order agnostic w/o using
a TypeSet. I'm worried that's what I'm going to have to do.
* Spike a quick circonus_broker data source.
* Convert tags to a Set so the order does not matter.
* Add a `circonus_account` data source.
* Correctly spell account.
Pointed out by: @postwait
* Add the `circonus_contact_group` resource.
* Push descriptions into their own file in order to reduce the busyness of the schema when reviewing code.
* Rename `circonus_broker` and `broker` to `circonus_collector` and `collector`, respectively.
Change made with concent by Circonus to reduce confusion (@postwait, @maier, and several others).
* Use upstream contsants where available.
* Import the latest circonus-gometrics.
* Move to using a Set of collectors vs a list attached to a single attribute.
* Rename "cid" to "id" in the circonus_account data source and elsewhere
where possible.
* Inject a tag automatically. Update gometrics.
* Checkpoint `circonus_metric` resource.
* Enable provider-level auto-tagging. This is disabled by default.
* Rearrange metric. This is an experimental "style" of a provider. We'll see.
That moment. When you think you've gone off the rails on a mad scientist
experiment but like the outcome and think you may be onto something but
haven't proven it to yourself or anyone else yet? That. That exact
feeling of semi-confidence while being alone in the wilderness. Please
let this not be the Terraform provider equivalent of DJB's C style of
coding.
We'll know in another resource or two if this was a horrible mistake or
not.
* Begin moving `resource_circonus_check` over to the new world order/structure:
Much of this is WIP and incomplete, but here is the new supported
structure:
```
variable "used_metric_name" {
default = "_usage`0`_used"
}
resource "circonus_check" "usage" {
# collectors = ["${var.collectors}"]
collector {
id = "${var.collectors[0]}"
}
name = "${var.check_name}"
notes = "${var.notes}"
json {
url = "https://${var.target}/account/current"
http_headers = {
"Accept" = "application/json"
"X-Circonus-App-Name" = "TerraformCheck"
"X-Circonus-Auth-Token" = "${var.api_token}"
}
}
stream {
name = "${circonus_metric.used.name}"
tags = "${circonus_metric.used.tags}"
type = "${circonus_metric.used.type}"
}
tags = {
source = "circonus"
}
}
resource "circonus_metric" "used" {
name = "${var.used_metric_name}"
tags = {
source = "circonus"
}
type = "numeric"
}
```
* Document the `circonus_metric` resource.
* Updated `circonus_check` docs.
* If a port was present, automatically set it in the Config.
* Alpha sort the check parameters now that they've been renamed.
* Fix a handful of panics as a result of the schema changing.
* Move back to a `TypeSet` for tags. After a stint with `TypeMap`, move
back to `TypeSet`.
A set of strings seems to match the API the best. The `map` type was
convenient because it reduced the amount of boilerplate, but you loose
out on other things. For instance, tags come in the form of
`category:value`, so naturally it seems like you could use a map, but
you can't without severe loss of functionality because assigning two
values to the same category is common. And you can't normalize map
input or suppress the output correctly (this was eventually what broke
the camel's back). I tried an experiment of normalizing the input to be
`category:value` as the key in the map and a value of `""`, but... seee
diff suppress. In this case, simple is good.
While here bring some cleanups to _Metric since that was my initial
testing target.
* Rename `providerConfig` to `_ProviderConfig`
* Checkpoint the `json` check type.
* Fix a few residual issues re: missing descriptions.
* Rename `validateRegexp` to `_ValidateRegexp`
* Use tags as real sets, not just a slice of strings.
* Move the DiffSuppressFunc for tags down to the Elem.
* Fix up unit tests to chase the updated, default hasher function being used.
* Remove `Computed` attribute from `TypeSet` objects.
This fixes a pile of issues re: update that I was having.
* Rename functions.
`GetStringOk` -> `GetStringOK`
`GetSetAsListOk` -> `GetSetAsListOK`
`GetIntOk` -> `GetIntOK`
* Various small cleanups and comments rolled into a single commit.
* Add a `postgresql` check type for the `circonus_check` resource.
* Rename various validator functions to be _CapitalCase vs capitalCase.
* Err... finish the validator renames.
* Add `GetFloat64()` support.
* Add `icmp_ping` check type support.
* Catch up to the _API*Attr renames.
Deliberately left out of the previous commit in order to create a clean
example of what is required to add a new check type to the
`circonus_check` resource.
* Clarify when the `target` attribute is required for the `postgresql`
check type.
* Correctly pull the metric ID attribute from the right location.
* Add a circonus_stream_group resource (a.k.a. a Circonus "metric cluster")
* Add support for the [`caql`](https://login.circonus.com/user/docs/caql_reference) check type.
* Add support for the `http` check type.
* `s/SSL/TLS/g`
* Add support for `tcp` check types.
* Enumerate the available metrics that are supported for each check type.
* Add [`cloudwatch`](https://login.circonus.com/user/docs/Data/CheckTypes/CloudWatch) check type support.
* Add a `circonus_trigger` resource (a.k.a Circonus Ruleset).
* Rename a handful of functions to make it clear in the function name the
direction of flow for information moving through the provider.
TL;DR: Replace `parse` and `read` with "foo to bar"-like names.
* Fix the attribute name used in a validator. Absent != After.
* Set the minimum `absent` predicate to 70s per testing.
* Fix the regression tests for circonus_trigger now that absent has a 70s min
* Fix up the `tcp` check to require a `host` attribute.
Fix tests. It's clear I didn't run these before committing/pushing the
`tcp` check last time.
* Fix `circonus_check` for `cloudwatch` checks.
* Rename `parsePerCheckTypeConfig()` to `_CheckConfigToAPI` to be
consistent with other function names.
grep(1)ability of code++
* Slack buttons as an integer are string encoded.
* Fix updates for `circonus_contact`.
* Fix the out parameters for contact groups.
* Move to using `_CastSchemaToTF()` where appropriate.
* Fix circonus_contact_group. Updates work as expected now.
* Use `_StateSet()` in place of `d.Set()` everywhere.
* Make a quick pass over the collector datasource to modernize its style
* Quick pass for items identified by `golint`.
* Fix up collectors
* Fix the `json` check type.
Reconcile possible sources of drift. Update now works as expected.
* Normalize trigger durations to seconds.
* Improve the robustness of the state handling for the `circonus_contact_group` resource.
* I'm torn on this, but sort the contact groups in the notify list.
This does mean that if the first contact group in the list has a higher
lexical sort order the plan won't converge until the offending resource
is tainted and recreated. But there's also some sorting happening
elsewhere, so.... sort and taint for now and this will need to be
revisited in the future.
* Add support for the `httptrap` check type.
* Remove empty units from the state file.
* Metric clusters can return a 404. Detect this accordingly in its
respective Exists handler.
* Add a `circonus_graph` resource.
* Fix a handful of bugs in the graph provider.
* Re-enable the necessary `ConflictsWith` definitions and normalize attribute names.
* Objects that have been deleted via the UI return a 404. Handle in Exists().
* Teach `circonus_graph`'s Stack set to accept nil values.
* Set `ForceNew: true` for a graph's name.
* Chase various API fixes required to make `circonus_graph` work as expected.
* Fix up the handling of sub-1 zoom resolutions for graphs.
* Add the `check_by_collector` out parameter to the `circonus_check` resource.
* Improve validation of line vs area graphs. Fix graph_style.
* Fix up the `logarithmic` graph axis option.
* Resolve various trivial `go vet` issues.
* Add a stream_group out parameter.
* Remove incorrectly applied `Optional` attributes to the `circonus_account` resource.
* Remove various `Optional` attributes from the `circonus_collector` data source.
* Centralize the common need to suppress leading and trailing whitespace into `suppressWhitespace`.
* Sync up with upstream vendor fixes for circonus_graph.
* Update the checksum value for the http check.
* Chase `circonus_graph`'s underlying `line_style` API object change from `string` to `*string`.
* Clean up tests to use a generic terraform regression testing account.
* Rename all identifiers that began with a `_` and replace with a corresponding lowercase glyph.
* Remove stale comment in types.
* Move the calls to `ResourceData`'s `SetId()` calls to be first in the
list so that no resources are lost in the event of a `panic()`.
* Remove `stateSet` from the `circonus_trigger` resource.
* Remove `stateSet` from the `circonus_stream_group` resource.
* Remove `schemaSet` from the `circonus_graph` resource.
* Remove `stateSet` from the `circonus_contact` resource.
* Remove `stateSet` from the `circonus_metric` resource.
* Remove `stateSet` from the `circonus_account` data source.
* Remove `stateSet` from the `circonus_collector` data source.
* Remove stray `stateSet` call from the `circonus_contact` resource.
This is an odd artifact to find... I'm completely unsure as to why it
was there to begin with but am mostly certain it's a bug and needs to be
removed.
* Remove `stateSet` from the `circonus_check` resource.
* Remove the `stateSet` helper function.
All call sites have been converted to return errors vs `panic()`'ing at
runtime.
* Remove a pile of unused functions and type definitions.
* Remove the last of the `attrReader` interface.
* Remove an unused `Sprintf` call.
* Update `circonus-gometrics` and remove unused files.
* Document what `convertToHelperSchema()` does.
Rename `castSchemaToTF` to `convertToHelperSchema`.
Change the function parameter ordering so the `map` of attribute
descriptions: this is much easier to maintain when the description map
is first when creating schema inline.
* Move descriptions into their respective source files.
* Remove all instances of `panic()`.
In the case of software bugs, log an error. Never `panic()` and always
return a value.
* Rename `stream_group` to `metric_cluster`.
* Rename triggers to rule sets
* Rename `stream` to `metric`.
* Chase the `stream` -> `metric` change into the docs.
* Remove some unused test functions.
* Add the now required `color` attribute for graphing a `metric_cluster`.
* Add a missing description to silence a warning.
* Add `id` as a selector for the account data source.
* Futureproof testing: Randomize all asset names to prevent any possible resource conflicts.
This isn't a necessary change for our current build and regression
testing, but *just in case* we have a radical change to our testing
framework in the future, make all resource names fully random.
* Rename various values to match the Circonus docs.
* s/alarm/alert/g
* Ensure ruleset criteria can not be empty.
helper/schema: Rename Timeout resource block to Timeouts
- Pluralize configuration argument name to better represent that there is
one block for many timeouts
- use a const for the configuration timeouts key
- update docs
Fixes: #12506
When a replication_task cdc_start_time was specified as an int, it was
causing a panic as the conversion to a Unix timestampe was expecting a
string
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAwsDmsReplicationTaskBasic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/08 22:55:29 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAwsDmsReplicationTaskBasic -timeout 120m
=== RUN TestAccAwsDmsReplicationTaskBasic
--- PASS: TestAccAwsDmsReplicationTaskBasic (1089.77s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 1089.802s
```
Fixes: #7492
When we use the same IP Address, BGP ASN and VPN Type as an existing
aws_customer_gateway, terraform will take control of that gateway (not
import it!) and try and modify it. This could be very bad
There is a warning on the AWS documentation that one gateway of the same
parameters can be created, Terraform is now going to error if a gateway
of the same parameters is attempted to be created
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSCustomerGateway_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/07 18:40:39 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSCustomerGateway_ -timeout 120m
=== RUN TestAccAWSCustomerGateway_importBasic
--- PASS: TestAccAWSCustomerGateway_importBasic (31.11s)
=== RUN TestAccAWSCustomerGateway_basic
--- PASS: TestAccAWSCustomerGateway_basic (68.72s)
=== RUN TestAccAWSCustomerGateway_similarAlreadyExists
--- PASS: TestAccAWSCustomerGateway_similarAlreadyExists (35.18s)
=== RUN TestAccAWSCustomerGateway_disappears
--- PASS: TestAccAWSCustomerGateway_disappears (25.13s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 160.172s
```
* WIP: added a new resource type : google_compute_snapshot
* [WIP]: added a test acceptance for google_compute_snapshot
* Cleanup
* Minor correction : "Deleting disk" message in Delete method
* Error in merge action
* Error in merge action
* added support for linux capabilities
Refs #11623
Added capabilities block
Added tests for it
Added documentation for it.
My PC doesnt support memory swap so it errors there.
```
$ make testacc TEST=./builtin/providers/docker TESTARGS='-run=TestAccDockerContainer_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/17 14:57:08 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/docker -v -run=TestAccDockerContainer_ -timeout 120m
=== RUN TestAccDockerContainer_basic
--- PASS: TestAccDockerContainer_basic (44.50s)
=== RUN TestAccDockerContainer_volume
--- PASS: TestAccDockerContainer_volume (40.73s)
=== RUN TestAccDockerContainer_customized
--- FAIL: TestAccDockerContainer_customized (50.27s)
testing.go:265: Step 0 error: Check failed: Check 2/2 error: Container has wrong memory swap setting: -1
Please check that you machine supports memory swap (you can do that by running 'docker info' command).
=== RUN TestAccDockerContainer_upload
--- PASS: TestAccDockerContainer_upload (38.56s)
FAIL
exit status 1
FAIL github.com/hashicorp/terraform/builtin/providers/docker 174.070s
Makefile:48: recipe for target 'testacc' failed
make: *** [testacc] Error 1
```
* Documentation changes.
* added maxitems and rerun tests
Fixes: #12494
The Create was changed to use the default and not d.GetOk - the update
wasn't - this was causing issues when trying to update to a false value
```
% make testacc TEST=./builtin/providers/datadog
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/03/07 16:20:54 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/datadog -v -timeout 120m
=== RUN TestDatadogMonitor_import
--- PASS: TestDatadogMonitor_import (4.77s)
=== RUN TestDatadogUser_import
--- PASS: TestDatadogUser_import (6.23s)
=== RUN TestProvider
--- PASS: TestProvider (0.00s)
=== RUN TestProvider_impl
--- PASS: TestProvider_impl (0.00s)
=== RUN TestAccDatadogMonitor_Basic
--- PASS: TestAccDatadogMonitor_Basic (3.83s)
=== RUN TestAccDatadogMonitor_BasicNoTreshold
--- PASS: TestAccDatadogMonitor_BasicNoTreshold (4.92s)
=== RUN TestAccDatadogMonitor_Updated
--- PASS: TestAccDatadogMonitor_Updated (5.88s)
=== RUN TestAccDatadogMonitor_TrimWhitespace
--- PASS: TestAccDatadogMonitor_TrimWhitespace (3.23s)
=== RUN TestAccDatadogMonitor_Basic_float_int
--- PASS: TestAccDatadogMonitor_Basic_float_int (5.73s)
=== RUN TestAccDatadogTimeboard_update
--- PASS: TestAccDatadogTimeboard_update (8.86s)
=== RUN TestValidateAggregatorMethod
--- PASS: TestValidateAggregatorMethod (0.00s)
=== RUN TestAccDatadogUser_Updated
--- PASS: TestAccDatadogUser_Updated (6.05s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/datadog 49.506s
```
This covers the scenario of an instance created by a spot request. Using
Terraform we only know the spot request is fulfilled but the instance can
still be pending which causes the attachment to fail.
Google Container Engine's cluster API returned instance group manager
URLs when it meant to return instance group URLs. See #4336 for details
about the bug.
While this is undeniably an upstream problem, this PR:
* detects the error, meaning it will work as expected when the API is
fixed.
* corrects the error by requesting the instance group manager, then
retrieving its instance group URL, and using that instead.
* adds a test that exercises the error and the solution, to ensure it is
functioning properly.
* provider/ignition: migration from resources to data resources
* website: provider/ignition documention updated to data resources
* provider/ignition: backwards compatibility support for old resources
* Ensures elb exists before negotiation policy check; Fixes#11260
* Adds acceptance test case for missing elb
* Adds back https properties for test elb
* vendor: Updating cobblerclient for Cobbler
* provider/cobbler: Fix Profile Repos
This commit fixes a bug where adding repos would result in an error.
This was due to the Cobbler API wanting a space-separated list of
repos rather than an array. The Cobbler Service will split the string
by space when used internally, but will always present the repos
as a string.
* provider/cobbler: System Interface Management Test
This commit adds a test to verify that the Management
parameter of System Interfaces works.
* Allow for local development with ns1 provider.
* Adds first implementation of ns1 notification list resource.
* NS1 record.use_client_subnet defaults to true, and added test for field.
* Adds more test cases for monitoring jobs.
* Adds webhook/datafeed notifier types and acctests for notifylists.
* Adds docs for notifylists resource.
* Updates ns1-go rest client via govendor
* Fix typos in record docs
In the event that an unexpected state is returned from
`environmentStateRefreshFunc` errors in the Elastic Beanstalk console
will not be returned to the user.
To aid in tracking down the error that's causing
TestAccGoogleSqlDatabaseInstance_basic to fail (it's claiming an op
can't be found?) I've added the op name (which is unique) to the error
output for op errors.
Our GCP storage tests are really flaky right now due to rate limiting.
In theory, this could also impact Terraform users that are
deleting/creating large numbers of Google Cloud Storage buckets at once.
To fix, I'm detecting the specific error code that GCP returns when it's
a rate limit error, and using that with resource.Retry to try the
request again.
When comparing the config and state for google_project_iam_policy,
always merge the bindings down to a common representation, to avoid a
perpetual diff.
Fixes#11763.
* helper/schema: Add custom Timeout block for resources
* refactor DefaultTimeout to suuport multiple types. Load meta in Refresh from Instance State
* update vpc but it probably wont last anyway
* refactor test into table test for more cases
* rename constant keys
* refactor configdecode
* remove VPC demo
* remove comments
* remove more comments
* refactor some
* rename timeKeys to timeoutKeys
* remove note
* documentation/resources: Document the Timeout block
* document timeouts
* have a test case that covers 'hours'
* restore a System default timeout of 20 minutes, instead of 0
* restore system default timeout of 20 minutes, refactor tests, add test method to handle system default
* rename timeout key constants
* test applying timeout to state
* refactor test
* Add resource Diff test
* clarify docs
* update to use constants
* provider/openstack: Redesign openstack_blockstorage_volume_attach_v2
The current design of openstack_blockstorage_volume_attach_v2 does
not correctly implement the Block Storage API attachment call. It
was only partially implemented, only marking volumes as being
attached, while never actually attaching them.
This redesign is a closer alignment to how creating attachments
to a standalone Block Storage service works.
For creating attachments specifically in the case of OpenStack
Compute instances, the openstack_compute_volume_attach_v2 resource
is required.
* provider/openstack: re-adding instance_id for backwards compatibility
This commit adds the openstack_compute_floatingip_associate_v2
resource which specifically handles associating a floating IP
address to an instance. This can be used instead of the existing
floating_ip options in the openstack_compute_instance_v2 resource.
* Replace DNSimple API client with the official Go client
* Upgrade DNSimple provider to use the new API v2
Acceptance tests pass:
```
=== RUN TestProvider
--- PASS: TestProvider (0.00s)
=== RUN TestProvider_impl
--- PASS: TestProvider_impl (0.00s)
=== RUN TestAccDNSimpleRecord_Basic
--- PASS: TestAccDNSimpleRecord_Basic (2.67s)
=== RUN TestAccDNSimpleRecord_Updated
--- PASS: TestAccDNSimpleRecord_Updated (1.88s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/dnsimple
```
Note that the code still has to be updated to pass the account ID
dynamically in place of "TODO-ACCOUNT".
* Refactor DNSimple provider to expose both client and config
The config is required as the new API wants to know the identifier of
the account you are operating to. The account is not stored in the
client (as the client can talk with different accounts), hence I need
to pass it as part of the config.
* Identify Terraform requests to DNSimple via UserAgent
* Upgrade to the latest dnsimple-go version
* Update docs
Provide upgrade instructions and update the docs for API v2.
* Remove rendundant type declaration
Fixes:#11750
Before this change, adding a log_subscription_filter and then deleting
it manually would yield this error on terraform plan/apply:
```
% terraform plan ✹ ✭
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but will not be
persisted to local or remote state storage.
aws_iam_role.iam_for_lambda: Refreshing state... (ID: test_lambdafuntion_iam_role_example123)
aws_cloudwatch_log_group.logs: Refreshing state... (ID: example_lambda_name)
aws_iam_role_policy.test_lambdafunction_iam_policy: Refreshing state... (ID: test_lambdafuntion_iam_role_example123:test_lambdafunction_iam_policy)
aws_lambda_function.test_lambdafunction: Refreshing state... (ID: example_lambda_name_example123)
aws_lambda_permission.allow_cloudwatch_logs: Refreshing state... (ID: AllowExecutionFromCloudWatchLogs)
aws_cloudwatch_log_subscription_filter.test_lambdafunction_logfilter: Refreshing state... (ID: cwlsf-992677504)
Error refreshing state: 1 error(s) occurred:
* aws_cloudwatch_log_subscription_filter.test_lambdafunction_logfilter: aws_cloudwatch_log_subscription_filter.test_lambdafunction_logfilter: Subscription filter for log group example_lambda_name with name prefix test_lambdafunction_logfilter not found!
```
After this patch, we get the following behaviour:
```
% terraform plan ✹ ✭
[WARN] /Users/stacko/Code/go/bin/terraform-provider-aws overrides an internal plugin for aws-provider.
If you did not expect to see this message you will need to remove the old plugin.
See https://www.terraform.io/docs/internals/internal-plugins.html
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but will not be
persisted to local or remote state storage.
aws_iam_role.iam_for_lambda: Refreshing state... (ID: test_lambdafuntion_iam_role_example123)
aws_cloudwatch_log_group.logs: Refreshing state... (ID: example_lambda_name)
aws_lambda_function.test_lambdafunction: Refreshing state... (ID: example_lambda_name_example123)
aws_iam_role_policy.test_lambdafunction_iam_policy: Refreshing state... (ID: test_lambdafuntion_iam_role_example123:test_lambdafunction_iam_policy)
aws_lambda_permission.allow_cloudwatch_logs: Refreshing state... (ID: AllowExecutionFromCloudWatchLogs)
aws_cloudwatch_log_subscription_filter.test_lambdafunction_logfilter: Refreshing state... (ID: cwlsf-992677504)
The Terraform execution plan has been generated and is shown below.
Resources are shown in alphabetical order for quick scanning. Green resources
will be created (or destroyed and then created if an existing resource
exists), yellow resources are being changed in-place, and red resources
will be destroyed. Cyan entries are data sources to be read.
Note: You didn't specify an "-out" parameter to save this plan, so when
"apply" is called, Terraform can't guarantee this is what will execute.
+ aws_cloudwatch_log_subscription_filter.test_lambdafunction_logfilter
destination_arn: "arn:aws:lambda:us-west-2:187416307283:function:example_lambda_name_example123"
filter_pattern: "logtype test"
log_group_name: "example_lambda_name"
name: "test_lambdafunction_logfilter"
role_arn: "<computed>"
Plan: 1 to add, 0 to change, 0 to destroy.
```
Fixes: #12232
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEFSFileSystem_pagedTags'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSEFSFileSystem_pagedTags -timeout 120m
=== RUN TestAccAWSEFSFileSystem_pagedTags
--- PASS: TestAccAWSEFSFileSystem_pagedTags (39.51s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 39.537s
```
not found
Fixes: #12279
When manually deleting an autoscaling_group from the console, a
terraform plan would look as follows:
```
% terraform plan
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but will not be
persisted to local or remote state storage.
aws_launch_configuration.foobar: Refreshing state... (ID: test-0096cf26c7eebdc9fcb5bd1837)
aws_autoscaling_group.foobar: Refreshing state... (ID: test)
aws_autoscaling_schedule.foobar: Refreshing state... (ID: foobar)
Error refreshing state: 1 error(s) occurred:
* aws_autoscaling_schedule.foobar: aws_autoscaling_schedule.foobar: Error retrieving Autoscaling Scheduled Actions: ValidationError: Group test not found
status code: 400, request id: 093e9ed5-fe01-11e6-b990-1f64334b3a10
```
After this patch:
```
% terraform plan ✹ ✭
[WARN] /Users/stacko/Code/go/bin/terraform-provider-aws overrides an internal plugin for aws-provider.
If you did not expect to see this message you will need to remove the old plugin.
See https://www.terraform.io/docs/internals/internal-plugins.html
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but will not be
persisted to local or remote state storage.
aws_launch_configuration.foobar: Refreshing state... (ID: test-0096cf26c7eebdc9fcb5bd1837)
aws_autoscaling_group.foobar: Refreshing state... (ID: test)
aws_autoscaling_schedule.foobar: Refreshing state... (ID: foobar)
The Terraform execution plan has been generated and is shown below.
Resources are shown in alphabetical order for quick scanning. Green resources
will be created (or destroyed and then created if an existing resource
exists), yellow resources are being changed in-place, and red resources
will be destroyed. Cyan entries are data sources to be read.
Note: You didn't specify an "-out" parameter to save this plan, so when
"apply" is called, Terraform can't guarantee this is what will execute.
+ aws_autoscaling_group.foobar
arn: "<computed>"
availability_zones.#: "1"
availability_zones.2487133097: "us-west-2a"
default_cooldown: "<computed>"
desired_capacity: "<computed>"
force_delete: "true"
health_check_grace_period: "300"
health_check_type: "ELB"
launch_configuration: "test-0096cf26c7eebdc9fcb5bd1837"
load_balancers.#: "<computed>"
max_size: "1"
metrics_granularity: "1Minute"
min_size: "1"
name: "test"
protect_from_scale_in: "false"
tag.#: "1"
tag.157008572.key: "Foo"
tag.157008572.propagate_at_launch: "true"
tag.157008572.value: "foo-bar"
termination_policies.#: "1"
termination_policies.0: "OldestInstance"
vpc_zone_identifier.#: "<computed>"
wait_for_capacity_timeout: "10m"
+ aws_autoscaling_schedule.foobar
arn: "<computed>"
autoscaling_group_name: "test"
desired_capacity: "0"
end_time: "2017-12-12T06:00:00Z"
max_size: "1"
min_size: "0"
recurrence: "<computed>"
scheduled_action_name: "foobar"
start_time: "2017-12-11T18:00:00Z"
Plan: 2 to add, 0 to change, 0 to destroy.
```
* provider/openstack: Rename provider to loadbalancer_provider
This commit renames provider to loadbalancer_provider in the
openstack_lb_loadbalancer_v2 resource.
It also changes security_group_ids to Computed so default
security groups are added to the state correctly.
* provider/openstack: Switch to a deprecation path for loadbalancer provider
This commit switches to using a deprecation path for removal of the
previous "provider" argument in favor of the new "loadbalancer_provider".
This commit removes the bundled devstack script and updates the
documentation to point to the latest build scripts used for
testing. It also mentions that development should be possible on
any OpenStack environment.
Add tests that ensure that image syntax resolves to API input the way we
want it to.
Add a lot of different input forms for images, to more closely map to
what the API accepts, so anything that's valid input to the API should
also be valid input in a config.
Stop resolving image families to specific image URLs, allowing things
like instance templates to evolve over time as new images are pushed.
Fixes: #12205
You cannot use an index of an empty slide therefore, we got a panic as follows:
```
aws_ssm_association.foo: Creating...
instance_id: "" => "i-002f3898dc95350e7"
name: "" => "test_document_association-%s"
parameters.%: "" => "2"
parameters.directoryId: "" => "d-926720980b"
parameters.directoryName: "" => "corp.mydomain.com"
Error applying plan:
1 error(s) occurred:
* aws_ssm_association.foo: 1 error(s) occurred:
* aws_ssm_association.foo: unexpected EOF
Terraform does not automatically rollback in the face of errors.
Instead, your Terraform state file has been partially updated with
any resources that successfully completed. Please address the error
above and apply again to incrementally change your infrastructure.
panic: runtime error: index out of range
2017/02/23 21:41:45 [DEBUG] plugin: terraform-provider-aws:
2017/02/23 21:41:45 [DEBUG] plugin: terraform-provider-aws: goroutine 1419 [running]:
2017/02/23 21:41:45 [DEBUG] plugin: terraform-provider-aws: panic(0x1567480, 0xc42000c110)
2017/02/23 21:41:45 [DEBUG] plugin: terraform-provider-aws: /usr/local/Cellar/go/1.7.4_1/libexec/src/runtime/panic.go:500 +0x1a1
```
Fixes#12183
The fix is in flatmap for this but the entire issue is a bit more
complex. Given a schema with a computed set, if you reference it like
this:
lookup(attr[0], "field")
And "attr" contains a computed set within it, it would panic even though
"field" is available. There were a couple avenues I could've taken to
fix this:
1.) Any complex value containing any unknown value at any point is
entirely unknown.
2.) Only the specific part of the complex value is unknown.
I took route 2 so that the above works without any computed (since
"name" is not computed but something else is). This may actually have an
effect on other parts of Terraform configs, however those similar
configs would've simply crashed previously so it shouldn't break any
pre-existing configs.
* provider/azurerm: Bump AzureRM SDK to v8.0.1-beta
* provider/azurerm: Renaming SDK packages as per MSFT updates
* Bump azurerm sdk 8.0.1 (#12076)
* Updating the constructors to match the updated types
* Updating the Redis Client name
* ObjectID is now a string
* Updating to match the new Storage API specs
This feature allows sending a notification to either an SQS queue or an
SNS topic when an error occurs running an AWS Lambda function.
This fixes#10630.
* providers/spotinst: Add support for Spotinst resources
* providers/spotinst: Fix merge conflict - layouts/docs.erb
* docs/providers/spotinst: Fix the resource description field
* providers/spotinst: Fix the acceptance tests
* providers/spotinst: Mark the device_index as a required field
* providers/spotinst: Change the associate_public_ip_address field to TypeBool
* docs/providers/spotinst: Update the description of the adjustment field
* providers/spotinst: Rename IamRole to IamInstanceProfile to make it more compatible with the AWS provider
* docs/providers/spotinst: Rename iam_role to iam_instance_profile
* providers/spotinst: Deprecate the iam_role attribute
* providers/spotinst: Fix a misspelled var (IamRole)
* providers/spotinst: Fix possible null pointer exception related to "iam_instance_profile"
* docs/providers/spotinst: Add "load_balancer_names" missing description
* providers/spotinst: New resource "spotinst_subscription" added
* providers/spotinst: Eliminate a possible null pointer exception in "spotinst_aws_group"
* providers/spotinst: Eliminate a possible null pointer exception in "spotinst_subscription"
* providers/spotinst: Mark spotinst_subscription as deleted in destroy
* providers/spotinst: Add support for custom event format in spotinst_subscription
* providers/spotinst: Disable the destroy step of spotinst_subscription
* providers/spotinst: Add support for update subscriptions
* providers/spotinst: Merge fixed conflict - layouts/docs.erb
* providers/spotinst: Vendor dependencies
* providers/spotinst: Return a detailed error message
* provider/spotinst: Update the plugin list
* providers/spotinst: Vendor dependencies using govendor
* providers/spotinst: New resource "spotinst_healthcheck" added
* providers/spotinst: Update the Spotinst SDK
* providers/spotinst: Comment out unnecessary log.Printf
* providers/spotinst: Fix the acceptance tests
* providers/spotinst: Gofmt fixes
* providers/spotinst: Use multiple functions to expand each block
* providers/spotinst: Allow ondemand_count to be zero
* providers/spotinst: Change security_group_ids from TypeSet to TypeList
* providers/spotinst: Remove unnecessary `ForceNew` fields
* providers/spotinst: Update the Spotinst SDK
* providers/spotinst: Add support for capacity unit
* providers/spotinst: Add support for EBS volume pool
* providers/spotinst: Delete health check
* providers/spotinst: Allow to set multiple availability zones
* providers/spotinst: Gofmt
* providers/spotinst: Omit empty strings from the load_balancer_names field
* providers/spotinst: Update the Spotinst SDK to v1.1.9
* providers/spotinst: Add support for new strategy parameters
* providers/spotinst: Update the Spotinst SDK to v1.2.0
* providers/spotinst: Add support for Kubernetes integration
* providers/spotinst: Fix merge conflict - vendor/vendor.json
* providers/spotinst: Update the Spotinst SDK to v1.2.1
* providers/spotinst: Add support for Application Load Balancers
* providers/spotinst: Do not allow to set ondemand_count to 0
* providers/spotinst: Update the Spotinst SDK to v1.2.2
* providers/spotinst: Add support for scaling policy operators
* providers/spotinst: Add dimensions to spotinst_aws_group tests
* providers/spotinst: Allow both ARN and name for IAM instance profiles
* providers/spotinst: Allow ondemand_count=0
* providers/spotinst: Split out the set funcs into flatten style funcs
* providers/spotinst: Update the Spotinst SDK to v1.2.3
* providers/spotinst: Add support for EBS optimized flag
* providers/spotinst: Update the Spotinst SDK to v2.0.0
* providers/spotinst: Use stringutil.Stringify for debugging
* providers/spotinst: Update the Spotinst SDK to v2.0.1
* providers/spotinst: Key pair is now optional
* providers/spotinst: Make sure we do not nullify signals on strategy update
* providers/spotinst: Hash both Strategy and EBS Block Device
* providers/spotinst: Hash AWS load balancer
* providers/spotinst: Update the Spotinst SDK to v2.0.2
* providers/spotinst: Verify namespace exists before appending policy
* providers/spotinst: Image ID will be in a separate block from now on, so as to allow ignoring changes only on the image ID. This change is backwards compatible.
* providers/spotinst: user data decoded when returned from spotinst api, so that TF compares the two states properly, and does not update without cause.
Fixes: #8055Fixes: #10264Fixes: #10881
We have swapped from using d.GetOk (as that func returns nil when a
default value is used) and moved to using default values that we can
pass directly to the Struct. The fact we have default values, means that
we can use d.Get which will work here
```
% make testacc TEST=./builtin/providers/datadog
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/22 18:56:03 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/datadog -v -timeout 120m
=== RUN TestDatadogMonitor_import
--- PASS: TestDatadogMonitor_import (8.66s)
=== RUN TestProvider
--- PASS: TestProvider (0.00s)
=== RUN TestProvider_impl
--- PASS: TestProvider_impl (0.00s)
=== RUN TestAccDatadogMonitor_Basic
--- PASS: TestAccDatadogMonitor_Basic (5.68s)
=== RUN TestAccDatadogMonitor_BasicNoTreshold
--- PASS: TestAccDatadogMonitor_BasicNoTreshold (3.13s)
=== RUN TestAccDatadogMonitor_Updated
--- PASS: TestAccDatadogMonitor_Updated (6.41s)
=== RUN TestAccDatadogMonitor_TrimWhitespace
--- PASS: TestAccDatadogMonitor_TrimWhitespace (3.22s)
=== RUN TestAccDatadogMonitor_Basic_float_int
--- PASS: TestAccDatadogMonitor_Basic_float_int (5.50s)
=== RUN TestAccDatadogTimeboard_update
--- PASS: TestAccDatadogTimeboard_update (8.35s)
=== RUN TestValidateAggregatorMethod
--- PASS: TestValidateAggregatorMethod (0.00s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/datadog 40.954s
```
* provider/aws: New resource codepipeline
* Vendor aws/codepipeline
* Add tests
* Add docs
* Bump codepipeline to v1.6.25
* Adjustments based on feedback
* Force new resource on ID change
* Improve tests
* Switch update to read
Since we don't require a second pass, only do a read.
* Skip tests if GITHUB_TOKEN is not set
Reported by @sethvargo - we auto encode for AWS, we should follow a
similar pattern for Azure.
In order to escape the double encoding, we check that it's not already
encoded before encoding
* Vendor google.golang.org/api/cloudbilling/v1
* providers/google: Add cloudbilling client
* providers/google: google_project supports billing account
This change allows a Terraform user to set and update the billing
account associated with their project.
* providers/google: Testing project billing account
This change adds optional acceptance tests for project billing accounts.
GOOGLE_PROJECT_BILLING_ACCOUNT and GOOGLE_PROJECT_BILLING_ACCOUNT_2
must be set in the environment for the tests to run; otherwise, they
will be skipped.
Also includes a few code cleanups per review.
* providers/google: Improve project billing error message
* vendor: Updating Gophercloud
* provider/openstack: Image Data Source
This commit adds the openstack_images_image_v2 data source which
is able to query the Image Service v2 API for a specific image.
* provider/datadog: Pulls v2 and removes v1 of library go-datadog-api.
See https://github.com/zorkian/go-datadog-api/issues/56 for context.
* Fixes bug in backoff implementation that decreased performance significantly.
* Uses pointers for field types, providing support of distinguishing
between if a value is set, or the default value for that type is
effective.
* provider/datadog: Convert provider to use v2 of go-datadog-api.
* provider/datadog: Update vendored library.
* provider/datadog: Update dashboard resource to reflect API updates.
This commit adds the ability to log all requests and responses
between Terraform and the OpenStack cloud. To enable, set the
OS_DEBUG environment variable to 1.
This commit adds a check to prevent a user from specifying both
a floating IP and a port on a specific network. While this
configuration is currently allowed, the Port will be chosen and
applying the configuration again will show a state mismatch. This
attempts to prevent such a misconfiguration.
This commit has a few more fixes to the recently added
openstack_images_image_v2 resource:
* tags were changed to a Set because the OpenStack Image API does
not seem to respect ordering.
* The visibility argument was fixed.
* Acceptance tests for all updatable fields has been implemented.
* Documentation updates, including a new entry in the sidebar.
* provider/google-cloud: Add maintenance window
Allows specification of the `maintenance_window` within the `settings`
block. This controls when Google will restart a database in order to
apply updates. It is also possible to select an `update_track` to
relatively control updating between instances in the same project.
* Adjustments as suggested in code review.
* Added new resource aws_elastic_beanstalk_application_version.
* Changing bucket and key to required.
* Update to use d.Id() directly in DescribeApplicationVersions.
* Checking err to make sure that the application version is successfully deleted.
* Update `version_label` to `Computed: true`.
* provider/aws: Updating to python solution stack
* provider/aws: Beanstalk App Version delete source
The Elastic Beanstalk API call to delete `application_version` resource
should not delete the s3 bundle, as this object is managed by another
Terraform resource
* provider/aws: Update application version docs
* Fix application version test
* Add `version_label` update test
Adds test that fails after rebasing branch onto v0.8.x. `version_label`
changes do not update the `aws_elastic_beanstalk_environment` resource.
* `version_label` changes to update environment
* Prevent unintended delete of `application_version`
Prevents an `application_version` used by multiple environments from
being deleted.
* Add `force_delete` attribute
* Update documentation
* [datadog] Update go-datadog-api library
Involves one breaking API change. Also some `gofmt`ing.
* [datadog] Add support for new_host_delay to the datadog_monitor resource
New API parameter that Datadog added for monitors to ignore new hosts
for the specified time period in monitor evaluation.
Our delete operation for google_compute_project_metadata didn't check an
error when making the call to delete metadata, which led to a panic in
our tests. This is also probably indicative of why our tests
failed/metadata got left dangling.
Fixes the `TestAccAWSAutoscalingLifecycleHook_omitDefaultResult` acceptance test to run in parallel.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSAutoscalingLifecycleHook_omitDefaultResult'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/15 22:33:26 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSAutoscalingLifecycleHook_omitDefaultResult -timeout 120m
=== RUN TestAccAWSAutoscalingLifecycleHook_omitDefaultResult
--- PASS: TestAccAWSAutoscalingLifecycleHook_omitDefaultResult (146.91s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 146.917s
```
Previously we only validated that the cloudflare record provided was a valid record type. However, a record can be of a valid type, and still not be proxied, making it an invalid record type.
The main downside to having to check for whether or not the record type is proxied or not during validation, is that it relies on having two schema keys populated. This means that we can only catch the improper record type during `apply` time, instead of `plan` time.
```
$ go test -v -run "TestValidateRecordType" ./builtin/providers/cloudflare
=== RUN TestValidateRecordType
--- PASS: TestValidateRecordType (0.00s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/cloudflare 0.004s
```
sensitive
This was pointed out at the HUG in London tonight that we save the plain
text password in state
I don't think this will be ported back to 0-8-stable
This allows for updates to size, type and iops
Fixes: #11931
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEBSVolume_update'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/15 22:35:43 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSEBSVolume_update -timeout 120m
=== RUN TestAccAWSEBSVolume_updateSize
--- PASS: TestAccAWSEBSVolume_updateSize (53.57s)
=== RUN TestAccAWSEBSVolume_updateType
--- PASS: TestAccAWSEBSVolume_updateType (57.53s)
=== RUN TestAccAWSEBSVolume_updateIops
--- PASS: TestAccAWSEBSVolume_updateIops (53.63s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 164.753s
```
This extends the work in #11668 to enable final snapshots by default.
This time it's for redshift
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRedshiftCluster_withFinalSnapshot'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/04 13:53:02 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRedshiftCluster_withFinalSnapshot -timeout 120m
=== RUN TestAccAWSRedshiftCluster_withFinalSnapshot
--- PASS: TestAccAWSRedshiftCluster_withFinalSnapshot (859.96s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 859.986s
```
If we get `InvalidParameterException` with the message "Could not deliver test
message to specified" then retry as this is often down to some sort of internal
delay in Amazons API. Also increase the timeout from 30 seconds to 3 minutes as
it has been observed to take that long sometimes for the creation to succeed.
This applies to both log destinations and subscription filters.
* Adds response conditions for papertrail in fastly
* Adds cache conditional for gzip in fastly
* Opens up conitionals under fastly headers
* Adds request conditions to s3 logging for fastly
* Creates conditionals properly for testing
* Clarifies conditionals documentation for the website
* Clarifies resource descriptions for conditionals
* Formats papertrail testing properly
* Fizes syntax issues in gzip and s3 fastly testing
* Tests full schemas for gzip basic testing
* Updates header testing to check full schema
* Fixes gzip and headers testing
* Fixes s3 conditional testing
* vendor: Updating Gophercloud
* provider/openstack: Fix upstream AvailabilityZone field
This commit complements an upstream fix where "availability" was being sent instead of
"availability_zone".
We now enable the final_snapshot of aws_rds_cluster by default. This is
a continuation of the work in #11668
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRDSCluster_takeFinalSnapshot'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/04 13:19:52 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRDSCluster_takeFinalSnapshot -timeout 120m
=== RUN TestAccAWSRDSCluster_takeFinalSnapshot
--- PASS: TestAccAWSRDSCluster_takeFinalSnapshot (141.59s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 141.609s
```
Validate the policy supplied via `assume_role_policy` in an `aws_iam_role`
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRole_badJSON'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/13 14:13:47 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRole_badJSON -timeout 120m
=== RUN TestAccAWSRole_badJSON
--- PASS: TestAccAWSRole_badJSON (0.00s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 0.019s
```
Introduced in #11369, this fixes an issue with the diff suppress function when creating a new `aws_db_instance` resource, while using the default `engine_version`.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBInstance_diffSuppressInitialState'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/13 11:52:12 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSDBInstance_diffSuppressInitialState -timeout 120m
=== RUN TestAccAWSDBInstance_diffSuppressInitialState
--- PASS: TestAccAWSDBInstance_diffSuppressInitialState (480.78s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 480.793s
```
* Importing v7.0.1 of the SDK
* Configuring the Container Service Client
* Scaffolding the Container Service resource
* Scaffolding the Website documentation
* Completing the documentation
* Acceptance Tests for Kubernetes Azure Container Service
* DCOS / Swarm tests
* Parsing values back from the API properly
* Fixing the test
* Service Principal can be optional. Because of course it can.
* Validation for the Container Service Count's
* Updating the docs
* Updating the field required values
* Making the documentation more explicit
* Fixing the build
* Examples for DCOS and Swarm
* Removing storage_uri for now
* Making the SSH Key required as per the docs
* Resolving the merge conflicts
* Removing the unused error's
* Adding Hash's to the schema's
* Switching out the provider registration
* Fixing the hash definitions
* Updating keydata to match
* Client Secret is sensitive
* List -> Set
* Using the first item for the diagnostic_profile
* Helps if you actually update the type
* Updating the docs to include the Computed fields
* Fixing comments / removing redundant optional checks
* Removing the FQDN's from the examples
* Moving the Container resources together
Fixes: #11863
Backwards incompatible so will not be pushed to 0.8.x series. This
follows the datadog documentation as mentioned in the issue
```
% make testacc TEST=./builtin/providers/datadog TESTARGS='-run=TestAccDatadogMonitor_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/13 12:30:24 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/datadog -v -run=TestAccDatadogMonitor_ -timeout 120m
=== RUN TestAccDatadogMonitor_Basic
--- PASS: TestAccDatadogMonitor_Basic (84.23s)
=== RUN TestAccDatadogMonitor_BasicNoTreshold
--- PASS: TestAccDatadogMonitor_BasicNoTreshold (81.92s)
=== RUN TestAccDatadogMonitor_Updated
--- PASS: TestAccDatadogMonitor_Updated (82.91s)
=== RUN TestAccDatadogMonitor_TrimWhitespace
--- PASS: TestAccDatadogMonitor_TrimWhitespace (63.34s)
=== RUN TestAccDatadogMonitor_Basic_float_int
--- PASS: TestAccDatadogMonitor_Basic_float_int (75.84s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/datadog 388.257s
```
The volume_Droplet test was failing from an incorrect fix pushed on Friday. Fixes the failing test.
```
$ make testacc TEST=./builtin/providers/digitalocean TESTARGS='-run=TestAccDigitalOceanVolume_Droplet'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/11 17:55:09 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/digitalocean -v -run=TestAccDigitalOceanVolume_Droplet -timeout 120m
=== RUN TestAccDigitalOceanVolume_Droplet
--- PASS: TestAccDigitalOceanVolume_Droplet (52.78s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/digitalocean 52.797s
```
A security_group_rule can also be created from a `prefix_list_id`.
Introduced in #11809
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSSecurityGroupRule_PrefixListEgress'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/10 12:41:40 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSSecurityGroupRule_PrefixListEgress -timeout 120m
=== RUN TestAccAWSSecurityGroupRule_PrefixListEgress
--- PASS: TestAccAWSSecurityGroupRule_PrefixListEgress (33.94s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 33.970s
```
* provider/aws: output the log group name when create fails
* adjusted formatting to match other error output
* fixup detailed error message for ResourceAlreadyExistsException
* forgot an import
* show the log group name regardless of error type
Previously the AMI creation accepted a static value for the AMI's block device's volume size.
This change allows the user to omit the `volume_size` attribute, in order to mimic the AWS API behavior, which will use the EBS Volume's size.
Also fixes a potential panic case when setting `iops` on the AMI's block device.
The `aws_ami` resource previously didn't have any acceptance tests, adds two acceptance tests and a full testing suite for the `aws_ami` resource, so further tests can be written, as well as expansion upon the other `aws_ami_*` acceptance tests
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSAMI_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/09 20:18:22 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSAMI_ -timeout 120m
=== RUN TestAccAWSAMI_basic
--- PASS: TestAccAWSAMI_basic (44.21s)
=== RUN TestAccAWSAMI_snapshotSize
--- PASS: TestAccAWSAMI_snapshotSize (45.08s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 89.320s
```
Allows redshift security group tests to better handle being ran in parallel.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRedshiftSecurityGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/09 10:40:25 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRedshiftSecurityGroup_ -timeout 120m
=== RUN TestAccAWSRedshiftSecurityGroup_importBasic
--- PASS: TestAccAWSRedshiftSecurityGroup_importBasic (12.98s)
=== RUN TestAccAWSRedshiftSecurityGroup_ingressCidr
--- PASS: TestAccAWSRedshiftSecurityGroup_ingressCidr (11.02s)
=== RUN TestAccAWSRedshiftSecurityGroup_updateIngressCidr
--- PASS: TestAccAWSRedshiftSecurityGroup_updateIngressCidr (32.81s)
=== RUN TestAccAWSRedshiftSecurityGroup_ingressSecurityGroup
--- PASS: TestAccAWSRedshiftSecurityGroup_ingressSecurityGroup (14.82s)
=== RUN TestAccAWSRedshiftSecurityGroup_updateIngressSecurityGroup
--- PASS: TestAccAWSRedshiftSecurityGroup_updateIngressSecurityGroup (37.43s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 109.090s
```
Allows the redshift parameter group acceptance tests handle being ran in parallel better
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRedshiftParameterGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/09 10:16:19 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRedshiftParameterGroup_ -timeout 120m
=== RUN TestAccAWSRedshiftParameterGroup_importBasic
--- PASS: TestAccAWSRedshiftParameterGroup_importBasic (15.17s)
=== RUN TestAccAWSRedshiftParameterGroup_withParameters
--- PASS: TestAccAWSRedshiftParameterGroup_withParameters (13.16s)
=== RUN TestAccAWSRedshiftParameterGroup_withoutParameters
--- PASS: TestAccAWSRedshiftParameterGroup_withoutParameters (12.58s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 40.940s
```
Updates the aws_elb acceptance tests to better handle parallel test runs
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSLoadBalancerPolicy_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/09 10:04:58 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSLoadBalancerPolicy_ -timeout 120m
=== RUN TestAccAWSLoadBalancerPolicy_basic
--- PASS: TestAccAWSLoadBalancerPolicy_basic (24.50s)
=== RUN TestAccAWSLoadBalancerPolicy_updateWhileAssigned
--- PASS: TestAccAWSLoadBalancerPolicy_updateWhileAssigned (42.34s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 66.866s
```
When ran in parallel the tests `TestAccAwsEcsTaskDefinition_withNetwork` and `TestAccAwsEcsTaskDefinition_withTask` will overlap with each other due to the shared naming of the `iam_role` resource.
This fixes these tests to allow running in parallel on TeamCity.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAwsEcsTaskDefinition_withTask'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/09 09:20:03 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAwsEcsTaskDefinition_withTask -timeout 120m
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 0.022s
```
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAwsEcsTaskDefinition_withNetwork'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/09 09:21:10 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAwsEcsTaskDefinition_withNetwork -timeout 120m
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 0.026s
```
Fixes the `TestAccAwsAPIGatewayMethod_customauthorizer` acceptance test which would previously fail if the iam_role resources would leak
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAwsAPIGatewayMethod_customauthorizer'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/09 09:10:07 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAwsAPIGatewayMethod_customauthorizer -timeout 120m
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 0.022s
```
An AWS Security Group Rule requires at least one of `cidr_blocks`, `self`, or `source_security_group_id` in order to be successfully created.
If the `aws_security_group_rule` doesn't contain one of these attributes, the AWS API will still return a `200` response, and not report any error in the response.
Example response from the API on a malformed submission:
```
2017/02/08 16:04:33 [DEBUG] plugin: terraform: -----------------------------------------------------
2017/02/08 16:04:33 [DEBUG] plugin: terraform: aws-provider (internal) 2017/02/08 16:04:33 [DEBUG] [aws-sdk-go] DEBUG: Response ec2/AuthorizeSecurityGroupIngress Details:
2017/02/08 16:04:33 [DEBUG] plugin: terraform: ---[ RESPONSE ]--------------------------------------
2017/02/08 16:04:33 [DEBUG] plugin: terraform: HTTP/1.1 200 OK
2017/02/08 16:04:33 [DEBUG] plugin: terraform: Connection: close
2017/02/08 16:04:33 [DEBUG] plugin: terraform: Transfer-Encoding: chunked
2017/02/08 16:04:33 [DEBUG] plugin: terraform: Content-Type: text/xml;charset=UTF-8
2017/02/08 16:04:33 [DEBUG] plugin: terraform: Date: Wed, 08 Feb 2017 21:04:33 GMT
2017/02/08 16:04:33 [DEBUG] plugin: terraform: Server: AmazonEC2
2017/02/08 16:04:33 [DEBUG] plugin: terraform: Vary: Accept-Encoding
2017/02/08 16:04:33 [DEBUG] plugin: terraform:
2017/02/08 16:04:33 [DEBUG] plugin: terraform: 102
2017/02/08 16:04:33 [DEBUG] plugin: terraform: <?xml version="1.0" encoding="UTF-8"?>
2017/02/08 16:04:33 [DEBUG] plugin: terraform: <AuthorizeSecurityGroupIngressResponse xmlns="http://ec2.amazonaws.com/doc/2016-11-15/">
2017/02/08 16:04:33 [DEBUG] plugin: terraform: <requestId>ac08c33f-8043-46d4-b637-4c4b2fc7a094</requestId>
2017/02/08 16:04:33 [DEBUG] plugin: terraform: <return>true</return>
2017/02/08 16:04:33 [DEBUG] plugin: terraform: </AuthorizeSecurityGroupIngressResponse>
2017/02/08 16:04:33 [DEBUG] plugin: terraform: 0
2017/02/08 16:04:33 [DEBUG] plugin: terraform:
2017/02/08 16:04:33 [DEBUG] plugin: terraform:
2017/02/08 16:04:33 [DEBUG] plugin: terraform: -----------------------------------------------------
```
This previously caused Terraform to wait until the security_group_rule propagated, which never happened due to the silent failure.
The changeset ensures that one of the required attributes are set prior to creating the aws_security_group_rule.
Also catches the error returned from the retry function. Previously the error was ignored, and only logged at the `DEBUG` level.
Previously, an `aws_rds_cluster` that contains active instance groups would timeout on a destroy, if the destroy was able to only target the rds_cluster and not include the instance groups.
This would result in a `400` response from AWS, and Terraform would sit in a wait-loop until a 15-minute timeout while waiting for the cluster to be destroyed.
This catches the error returned from the `DeleteDBCluster` function call such that the proper error case can be returned to the user.
`400` from the AWS API:
```
2017/02/08 13:40:47 [DEBUG] plugin: terraform: ---[ RESPONSE ]--------------------------------------
2017/02/08 13:40:47 [DEBUG] plugin: terraform: HTTP/1.1 400 Bad Request
2017/02/08 13:40:47 [DEBUG] plugin: terraform: Connection: close
2017/02/08 13:40:47 [DEBUG] plugin: terraform: Content-Length: 337
2017/02/08 13:40:47 [DEBUG] plugin: terraform: Content-Type: text/xml
2017/02/08 13:40:47 [DEBUG] plugin: terraform: Date: Wed, 08 Feb 2017 18:40:46 GMT
2017/02/08 13:40:47 [DEBUG] plugin: terraform: X-Amzn-Requestid: 1b4a76cc-ee2e-11e6-867d-2311ebaffd3e
2017/02/08 13:40:47 [DEBUG] plugin: terraform:
2017/02/08 13:40:47 [DEBUG] plugin: terraform: <ErrorResponse xmlns="http://rds.amazonaws.com/doc/2014-10-31/">
2017/02/08 13:40:47 [DEBUG] plugin: terraform: <Error>
2017/02/08 13:40:47 [DEBUG] plugin: terraform: <Type>Sender</Type>
2017/02/08 13:40:47 [DEBUG] plugin: terraform: <Code>InvalidDBClusterStateFault</Code>
2017/02/08 13:40:47 [DEBUG] plugin: terraform: <Message>Cluster cannot be deleted, it still contains DB instances in non-deleting state.</Message>
2017/02/08 13:40:47 [DEBUG] plugin: terraform: </Error>
2017/02/08 13:40:47 [DEBUG] plugin: terraform: <RequestId>1b4a76cc-ee2e-11e6-867d-2311ebaffd3e</RequestId>
2017/02/08 13:40:47 [DEBUG] plugin: terraform: </ErrorResponse>
2017/02/08 13:40:47 [DEBUG] plugin: terraform:
2017/02/08 13:40:47 [DEBUG] plugin: terraform: -----------------------------------------------------
```
Error returns now, as expected:
```
Error applying plan:
2017/02/08 13:40:47 [DEBUG] plugin: waiting for all plugin processes to complete...
1 error(s) occurred:
* aws_rds_cluster.jake (destroy): 1 error(s) occurred:
2017/02/08 13:40:47 [DEBUG] plugin: terraform: aws-provider (internal) 2017/02/08 13:40:47 [DEBUG] plugin: waiting for all plugin processes to complete...
* aws_rds_cluster.jake: RDS Cluster cannot be deleted: Cluster cannot be deleted, it still contains DB instances in non-deleting state.
```
Our DNS tests were using terraform.test as a DNS name, which GCP was
erroring on, as we haven't proven we own the domain (and can't, as we
don't). To solve this, I updated the tests to use hashicorptest.com,
which we _do_ own, and which we have proven ownership of. The tests now
pass.
Found in testing that a timeout of 30 seconds didn't allow for the error
message that codebuild wasn't supported in eu-west-2
Discussed this with @radeksimko and he suggested a timeout raise
Storing error values to atomic.Value may fail if they have different
dynamic types. Wrap error value in a consistent struct type to avoid
panics.
Make sure we return a nil error on success
Previously the db_event_subscription import would only work if there was a single db_event_subscription resource. This fixes the import, allowing it to work as expected.
Also fixes the acceptance test for the resource to reflect this.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBEventSubscription_importBasic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/07 10:38:10 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSDBEventSubscription_importBasic -timeout 120m
=== RUN TestAccAWSDBEventSubscription_importBasic
--- PASS: TestAccAWSDBEventSubscription_importBasic (633.33s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 633.353s
```
* Adds schema for fastly healthcheck
* Handles changes to the fastly healthcheck
* Flattens and refreshed fastly healthchecks
* Adds testing for fastly healthcheck
* Adds website documentation for fastly healthcheck
* Fixes terraform syntax in test examples
Fixes the `TestAccAWSDBEventSubscription_basicUpdate` acceptance test
`TestAccAWSDBEventSubscription_importBasic` is still failing, but has been failing since November.
This changes removes read of the deprecated `policy_data` attr in
the `google_project` resource.
0.8.5 introduced new behavior that incorrectly read the `policy_data`
field during the read lifecycle event. This caused Terraform to
assume it owned not just policy defined in the data source, but
everything that was associated with the project. Migrating from 0.8.4
to 0.8.5, this would cause the config (partial) to be compared to the
state (complete, as it was read from the API) and assume some
policies had been explicitly deleted. Terraform would then delete them.
Fixes#11556
Allows the user to specify the log format version when setting up `s3logging` on the fastly service resource.
Requires an update to the vendored `go-fastly` dependency.
Also adds an additional acceptance test for the new attribute.
```
$ make testacc TEST=./builtin/providers/fastly TESTARGS='-run=TestAccFastlyServiceV1_s3logging'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/06 14:51:55 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/fastly -v -run=TestAccFastlyServiceV1_s3logging -timeout 120m
=== RUN TestAccFastlyServiceV1_s3logging_basic
--- PASS: TestAccFastlyServiceV1_s3logging_basic (36.11s)
=== RUN TestAccFastlyServiceV1_s3logging_s3_env
--- PASS: TestAccFastlyServiceV1_s3logging_s3_env (15.35s)
=== RUN TestAccFastlyServiceV1_s3logging_formatVersion
--- PASS: TestAccFastlyServiceV1_s3logging_formatVersion (15.71s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/fastly 67.186s
```
- OpenStack provider now supports either a path or the file contents for
`cacert_file`, `cert`, and `key`
- Makes it easier to automate TF by passing in certs as environment
variables
- set `OS_SSL_TESTS=true` to run the acceptance tests
Updates vendored Nomad jobspec parser such that parameterized nomad job files can no be parsed and used with Terraform.
Also fixes tests to adhere to new jobspec version, and update documentation to reflect such as well.
Discovered after #11619 was fixed, and while fixing acceptance tests for the `aws_spot_instance_request` resource.
Previously the `aws_spot_instance_request` resource wouldn't populate any of the block device attributes from the resulting instance's metadata. This fixes that issue, and also fixes the `aws_spot_instance_request` acceptance tests to be more equipped for running in parallel.
```
make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSSpotInstanceRequest_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/02 18:02:37 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSSpotInstanceRequest_ -timeout 120m
=== RUN TestAccAWSSpotInstanceRequest_basic
--- PASS: TestAccAWSSpotInstanceRequest_basic (111.96s)
=== RUN TestAccAWSSpotInstanceRequest_withBlockDuration
--- PASS: TestAccAWSSpotInstanceRequest_withBlockDuration (105.12s)
=== RUN TestAccAWSSpotInstanceRequest_vpc
--- PASS: TestAccAWSSpotInstanceRequest_vpc (115.81s)
=== RUN TestAccAWSSpotInstanceRequest_SubnetAndSG
--- PASS: TestAccAWSSpotInstanceRequest_SubnetAndSG (130.46s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 463.377s
```
Better handle parallel testing of the `aws_spot_fleet_request` resource. Previously we were catching a lot of errors due to naming the policy_attachment resource the same between tests.
* Terraform ProfitBricks Builder
* make fmt
* Merge remote-tracking branch 'upstream/master' into terraform-provider-profitbricks
# Conflicts:
# command/internal_plugin_list.go
* Addressing PR remarks
* Removed importers
* Added ProfitBricks Data Sources
* Added documentation
* Updated to REST v3:
- nat parameter for Nics
- availabilityZone for Volumes
Minor code clean up
* Minor code clean up
* Fixed typo in volume documentation
* make fmt
* Addressing requested changes
* Added a step in load balancer tests in CheckDestroy where we are making sure that the test doesn't leave dangling resources in ProfitBricks
* Changed expected image name
* Fixed data center test
Code clean up
* Add aws dms vendoring
* Add aws dms endpoint resource
* Add aws dms replication instance resource
* Add aws dms replication subnet group resource
* Add aws dms replication task resource
* Fix aws dms resource go vet errors
* Review fixes: Add id validators for all resources. Add validator for endpoint engine_name.
* Add aws dms resources to importability list
* Review fixes: Add aws dms iam role dependencies to test cases
* Review fixes: Adjustments for handling input values
* Add aws dms replication subnet group tagging
* Fix aws dms subnet group doesn't use standard error for resource not found
* Missed update of aws dms vendored version
* Add aws dms certificate resource
* Update aws dms resources to force new for immutable attributes
* Fix tests failing on subnet deletion by adding explicit dependencies. Combine import tests with basic tests to cut down runtime.
* provider/aws: Update Application Auto Scaling service model
- Add support for automatically scaling an Amazon EC2 Spot fleet.
* Remove duplicate policy_type check.
* Test creating a scalable target for a splot fleet request.
* Test creating a scaling policy for a splot fleet request.
* Update resource docs to support scaling an Amazon EC2 Spot fleet.
- aws_appautoscaling_policy
- aws_appautoscaling_target
* Remove arn attribute from aws_appautoscaling_target
- No arn is generated or returned for this resource.
* Remove optional name attribute from aws_appautoscaling_target
- ScalableTargets do not have a name
- I think this was copied from aws_appautoscaling_policy
* AWS Application Autoscaling resource documentation tweaks
- include a target resource in the policy example
- sort attributes by alpha
- fixup markdown
- add spaces to test config
Previously the `root_block_device` config map was a `schema.TypeSet` with an empty `Set` function, and a hard-limit of 1 on the attribute block.
This prevented a user from making any real changes inside the attribute block, thus leaving the user with a `Apply complete!` message, and nothing changed.
The schema API has since been updated, and we can now specify the `root_block_device` as a `schema.TypeList` with `MaxItems` set to `1`. This fixes the issue, and allows the user to update the `aws_instance`'s `root_block_device` attribute, and see changes actually propagate.
Adds tag support to the `aws_dynamodb_table` resource. Also adds a test for the resource, and a test to ensure that the tags are populated correctly from a resource import.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDynamoDBTable_tags'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/01 15:35:00 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSDynamoDBTable_tags -timeout 120m
=== RUN TestAccAWSDynamoDBTable_tags
--- PASS: TestAccAWSDynamoDBTable_tags (28.69s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 28.713s
```
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDynamoDbTable_importTags'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/01 15:39:49 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSDynamoDbTable_importTags -timeout 120m
=== RUN TestAccAWSDynamoDbTable_importTags
--- PASS: TestAccAWSDynamoDbTable_importTags (30.62s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 30.645s
```
I believe that if no VPC Endpoints were returned from the AWS API, we
were not guarding against a panic. We were strill trying to inspect the
RouteTableIds. This commit will ensure that no errors are thrown before
trying to use the RouteTableIds
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSVpcEndpointRouteTableAssociation_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/01 18:06:29 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSVpcEndpointRouteTableAssociation_ -timeout 120m
=== RUN TestAccAWSVpcEndpointRouteTableAssociation_basic
--- PASS: TestAccAWSVpcEndpointRouteTableAssociation_basic (42.83s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 42.859s
```
Fixes the beanstalk env tests such that they can run in parallel better. Previously, only the beanstalk application was randomized, now the beanstalk environment is also randomized to help better facilitate running our tests in parallel.
```
=== RUN TestAccAWSBeanstalkEnv_outputs
--- PASS: TestAccAWSBeanstalkEnv_outputs (388.74s)
=== RUN TestAccAWSBeanstalkEnv_cname_prefix
--- PASS: TestAccAWSBeanstalkEnv_cname_prefix (386.78s)
=== RUN TestAccAWSBeanstalkEnv_config
--- PASS: TestAccAWSBeanstalkEnv_config (532.56s)
=== RUN TestAccAWSBeanstalkEnv_resource
--- PASS: TestAccAWSBeanstalkEnv_resource (420.47s)
=== RUN TestAccAWSBeanstalkEnv_vpc
--- PASS: TestAccAWSBeanstalkEnv_vpc (516.02s)
=== RUN TestAccAWSBeanstalkEnv_template_change
--- PASS: TestAccAWSBeanstalkEnv_template_change (623.38s)
=== RUN TestAccAWSBeanstalkEnv_basic_settings_update
--- PASS: TestAccAWSBeanstalkEnv_basic_settings_update (705.32s)
```
If the shell spawns a subprocess which doesn't close the output file
descriptors, the exec.Cmd will block on Wait() (see
golang.org/issue/18874). Use an os.Pipe to provide the command with a
real file descriptor so the exec package doesn't need to do the copy
manually. This in turn may block our own reading goroutine, but we can
select on that and leave it for cleanup later.
If an `aws_volume_attachment` is identical to one that already exists in
the API, don't attempt to re-create it (which fails), simply act as
though the creation command had already been run and continue.
This allows Terraform to cleanly recover from a situation where a volume
attachment action hangs indefinitely, possibly due to a bad instance
state, requiring manual intervention such as an instance reboot. In such
a situation, Terraform believes the attachment has failed, when in fact
it succeeded after the timeout had expired. On the subsequent retry run,
attempting to re-create the attachment will fail outright, due to the
AttachVolume API call being non-idempotent. This patch implements the
idempotency client-side by matching the (name, vID, iID) tuple.
Note that volume attachments are not assigned an ID by the API.
message
Fixes: #11568
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRDSCluster_missingUserNameCausesError'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/02/01 12:11:14 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRDSCluster_missingUserNameCausesError -timeout 120m
=== RUN TestAccAWSRDSCluster_missingUserNameCausesError
--- PASS: TestAccAWSRDSCluster_missingUserNameCausesError (3.22s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 3.243s
```
The error message for a required parameter being missing has a wrong parameter baked into it. Therefore, when the error message tried to fire, it was throwing a panic. Added a test to make sure that we know the condition still fires and with a correct message
Fixes: #11549
When a user passes the wrong argument to a route53_record import, they
got a crash. This was because we expected the ID to parse correctly. The
crash looked like this:
```
% terraform import aws_route53_record.import1 mike.westredd.com
aws_route53_record.import1: Importing from ID "mike.westredd.com"...
aws_route53_record.import1: Import complete!
Imported aws_route53_record (ID: mike.westredd.com)
aws_route53_record.import1: Refreshing state... (ID: mike.westredd.com)
Error importing: 1 error(s) occurred:
* aws_route53_record.import1: unexpected EOF
panic: runtime error: index out of range
```
Rather than throwing a panic to the user, we should present them with a more useful message that tells them what the error is:
```
% terraform import aws_route53_record.import mike.westredd.com
aws_route53_record.import: Importing from ID "mike.westredd.com"...
aws_route53_record.import: Import complete!
Imported aws_route53_record (ID: mike.westredd.com)
aws_route53_record.import: Refreshing state... (ID: mike.westredd.com)
Error importing: 1 error(s) occurred:
* aws_route53_record.import: Error Importing aws_route_53 record. Please make sure the record ID is in the form ZONEID_RECORDNAME_TYPE (i.e. Z4KAPRWWNC7JR_dev_A
```
At least they can work out what the problem is in this case
Cloud SQL Gen 2 instances come with a default 'root'@'%' user on
creation. This change automatically deletes that user after creation. A
Terraform user must use the google_sql_user to create a user with
appropriate host and password.
The `aws_availability_zones` data source test was panicking. This fixes both tests
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSAvailabilityZones'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/31 15:47:39 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSAvailabilityZones -timeout 120m
=== RUN TestAccAWSAvailabilityZones_basic
--- PASS: TestAccAWSAvailabilityZones_basic (12.56s)
=== RUN TestAccAWSAvailabilityZones_stateFilter
--- PASS: TestAccAWSAvailabilityZones_stateFilter (13.59s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 26.187s
```
* Added Step Function Activity & Step Function State Machine
* Added SFN State Machine documentation
* Added aws_sfn_activity & documentation
* Allowed import of sfn resources
* Added more checks on tests, fixed documentation
* Handled the update case of a SFN function (might be already deleting)
* Removed the State Machine import test file
* Fixed the eventual consistency of the read after delete for SFN functions
The API asks you to send lower case values, but returns uppercase ones.
Here we lowercase the returned API values.
There is no migration here because the field in question is nested in a
set, so the hash will change regardless. Anyone using this feature now
has it broken anyway.
Fixes 2 acceptance tests for the `aws_instance` data source
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSInstanceDataSource_SecurityGroups'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/31 12:12:15 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSInstanceDataSource_SecurityGroups -timeout 120m
=== RUN TestAccAWSInstanceDataSource_SecurityGroups
--- PASS: TestAccAWSInstanceDataSource_SecurityGroups (119.14s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 119.172s
```
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSInstanceDataSource_tags'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/31 12:15:42 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSInstanceDataSource_tags -timeout 120m
=== RUN TestAccAWSInstanceDataSource_tags
--- PASS: TestAccAWSInstanceDataSource_tags (118.87s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 118.900s
```
The existing hash function for set items cannot generate consistent hashes when using both `Optional` and `Computed` on a schema field.
I tried to add this use case to the existing code base, but came to the conclusion this would be quite an endeavor.
That together with the fact this is the only field in all sets used in all builtin providers/resources that would be using both options at the same time, made me decide to change this single resource instead.
When switching from one Rancher server to another, we want Terraform
to recreate Rancher resources. This currently leads to ugly `EOF` errors.
This patch resets resource Ids when they can't be found in the Rancher API.
* Image and vhdcontainers are mutually exclusive.
* Fix ip configuration handling and update support for load balancer backend pools.
* Fix os disk handling.
* Remove os_type from disk hash.
* Load balancer pools should not be computed.
* Add support for the overprovision property.
* Update documentation.
* Create acceptance test for scale set lb changes.
* Create acceptance test for scale set overprovisioning.
* OS-131 Updated dependencies to use ukcloud/govcloudair instead of hmrc/vmware-govcd
* OS-131 Fixed failing tests by adding package name to imports of ukcloud/govcloudair
* OS-131 Minor change to force Travis to re-build the PR
* added server_side_encryption to s3_bucket_object resource including associated acceptance test and documentation.
* got acceptance tests passing.
* made server_side_encryption a computed attribute and only set kms_key_id attribute if an S3 non-default master key is in use.
* ensured kms api is only interrogated if required.
Fixes `aws_rds_cluster_parameter_group` acceptance tests, which have been broken since aa8c2ac587
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBClusterParameterGroupOnly'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/30 16:20:38 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSDBClusterParameterGroupOnly -timeout 120m
=== RUN TestAccAWSDBClusterParameterGroupOnly
--- PASS: TestAccAWSDBClusterParameterGroupOnly (15.26s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 15.282s
```
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBClusterParameterGroup_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/30 16:22:48 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSDBClusterParameterGroup_basic -timeout 120m
=== RUN TestAccAWSDBClusterParameterGroup_basic
--- PASS: TestAccAWSDBClusterParameterGroup_basic (29.48s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 29.510s
```
Fixes `aws_cloudwatch_log_subscription_filter` acceptance tests that had been failing since mid December
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSCloudwatchLogSubscriptionFilter_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/30 16:00:05 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSCloudwatchLogSubscriptionFilter_basic -timeout 120m
=== RUN TestAccAWSCloudwatchLogSubscriptionFilter_basic
--- PASS: TestAccAWSCloudwatchLogSubscriptionFilter_basic (26.34s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 26.364s
```
* Creates papertrail logging resource for fastly
* Adds modification support for fastly papertrail
* Flattens and lists papertrail resources
* Adds testing for fastly papertrail
* Adds papertrail documentation for fastly to the website
* Fixes schema assignment name mistake
* Changes testing hostnames to pass fastly API validation
Implementing vpc_peering_connection_accept.
Additions from @ewbankkit:
Rename 'aws_vpc_peering_connection_accept' to 'aws_vpc_peering_connection_accepter'.
Get it working reusing functionality from 'aws_vpc_peering_connection' resource.
* Add a new data provider to decrypt AWS KMS secrets
* Address feedback
* Rename aws_kms_secrets to aws_kms_secret
* Add more examples to the documentation
Fixes: #11461
This will allow the user to pass a policy to further restrict the use
of AssumeRole. It is important to note that it will NOT allow an
expansion of access rights
Fixes#10788
This checks `IsComputed` prior to attempting to use the JSON
configurations. Due to a change in 0.8, the prior check for simply map
existence would always succeed even with a computed value (as designed),
but we forgot to update provisioners to not do that.
There are other provisioners that also do this but to no ill effect
currently. I've only changed Chef since we know that is an issue.
This issue doesn't affect 0.9 due to helper/schema doing this
automatically for provisioners.
According to https://github.com/hashicorp/errwrap
'{{err}}' has to be used instead of '%s'
Without this patch, error output from terraform is missing important information:
* aws_cloudwatch_log_group.logs: Error Getting CloudWatch Logs Tag List: %s
With this patch, I get the important information. E.g.:
* aws_cloudwatch_log_group.logs: Error Getting CloudWatch Logs Tag List: AccessDeniedException: User: arn:aws:sts::XYZ:assumed-role/AAA-BBB-CCC/terraform-assuming-role-assume-role-ReadOnly is not authorized to perform: logs:ListTagsLogGroup on resource: arn:aws:logs:us-east-1:XYZ:log-group:logs:log-stream:
The support for "use_client_subnet" was half finished.
- Field was defined in schema.
- ResourceData-to-struct code was present but incorrect.
- struct-to-ResourceData code was missing.
Made the change and verified with manual testing:
1. In NS1 UI, switched "Use Client Subnet" between checked and
unchecked.
2. In Terraform config file, switched "use_client_subnet" field between
"true", "false", and omitted.
3. The output of "terraform plan" was as expected in all six cases.
This commit removes the default security group rules that are automatically
created when a security group is created. These rules are usually
permissive egress rules which makes it difficult to add more strict egress
security group rules.
Allows the user to import a default aws_alb_listener_rule. When creating the resource with TF, the AWS API requires that `priority` be an integer.
However, the `DescribeRules` API call returns a string for `priority`. This would work in every case except for the `default` listener rule, which sets the `priority` value to the string "default".
This fixes the previous error:
```
Error importing: 1 error(s) occurred:
* aws_alb_listener_rule.test: Cannot convert rule priority %q to int: strconv.ParseInt: parsing "default": invalid syntax
```
Fixes: #11464
Previously an attempt to destroy a LB stickiness policy would
result in an error like this:
```
* aws_lb_cookie_stickiness_policy.foo: Error removing LBCookieStickinessPolicy: LoadBalancerNotFound: There is no ACTIVE Load Balancer named 'tf-test-lb-tqatd'
status code: 400, request id: 28af1167-e4a4-11e6-8ddd-57ba410cbbb6
```
This checks for a missing load balancer on the policy read and allows
the destroy.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSLBCookieStickinessPolicy_missingLB'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/27 07:21:11 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSLBCookieStickinessPolicy_missingLB -timeout 120m
=== RUN TestAccAWSLBCookieStickinessPolicy_missingLB
--- PASS: TestAccAWSLBCookieStickinessPolicy_missingLB (28.90s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 28.929s
```
Add support for creating, updating, and deleting projects, as well as
their enabled services and their IAM policies.
Various concessions were made for backwards compatibility, and will be
removed in 0.9 or 0.10.
Adds EBS Volume support and tests for EMR Instnace Groups
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEMRInstanceGroup_ebsBasic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/25 10:14:58 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSEMRInstanceGroup_ebsBasic -timeout 120m
=== RUN TestAccAWSEMRInstanceGroup_ebsBasic
--- PASS: TestAccAWSEMRInstanceGroup_ebsBasic (675.14s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 675.171s
```
Type of change:
===============
- Bug fix
What changed? ... and Why:
==========================
The regexp is currently set to:
`pattern := `^[a-zA-Z0-9$_]+$`
The AWS docs state that qualifer names must conform to the following
regexp:
`Pattern: (|[a-zA-Z0-9$_-]+)`
As you can see, the current regexp in Terraform is missing the `-` at
the end.
This addresses that.
How has it been tested?
=======================
Added a few test cases to the existing spec for `AwsLambdaQualifier`
validation.
Adds a diff suppress function for the `engine_version` attribute of the `db_instance` AWS resource.
The function only supresses the state diff, if the attribute key `auto_minor_version_upgrade` is set, and if the returned `engine_version` from the running RDS instance shares the same prefix as the configured `engine_version`.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSDBInstance_MinorVersion'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/23 17:59:14 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSDBInstance_MinorVersion -timeout 120m
=== RUN TestAccAWSDBInstance_MinorVersion
--- PASS: TestAccAWSDBInstance_MinorVersion (503.48s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 503.518s
```
This commit adds a StateRefresh func for volume attachments. Mostly
this is to add a buffer of time between the request and the return
of the attachment to give time for the volume to become attached,
however, in some cases the refresh function could work as specified.
Docs have also been updated to reflect that a device could be specified,
but to use with caution.
* vendor: update gopkg.in/ns1/ns1-go.v2
* provider/ns1: Port the ns1 provider to Terraform core
* docs/ns1: Document the ns1 provider
* ns1: rename remaining nsone -> ns1 (#10805)
* Ns1 provider (#11300)
* provider/ns1: Flesh out support for meta structs.
Following the structure outlined by @pashap.
Using reflection to reduce copy/paste.
Putting metas inside single-item lists. This is clunky, but I couldn't
figure out how else to have a nested struct. Maybe the Terraform people
know a better way?
Inside the meta struct, all fields are always written to the state; I
can't figure out how to omit fields that aren't used. This is not just
verbose, it actually causes issues because you can't have both "up" and
"up_feed" set).
Also some minor other changes:
- Add "terraform" import support to records and zones.
- Create helper class StringEnum.
* provider/ns1: Make fmt
* provider/ns1: Remove stubbed out RecordRead (used for testing metadata change).
* provider/ns1: Need to get interface that m contains from Ptr Value with Elem()
* provider/ns1: Use empty string to indicate no feed given.
* provider/ns1: Remove old record.regions fields.
* provider/ns1: Removes redundant testAccCheckRecordState
* provider/ns1: Moves account permissions logic to permissions.go
* provider/ns1: Adds tests for team resource.
* provider/ns1: Move remaining permissions logic to permissions.go
* ns1/provider: Adds datasource.config
* provider/ns1: Small clean up of datafeed resource tests
* provider/ns1: removes testAccCheckZoneState in favor of explicit name check
* provider/ns1: More renaming of nsone -> ns1
* provider/ns1: Comment out metadata for the moment.
* Ns1 provider (#11347)
* Fix the removal of empty containers from a flatmap
Removal of empty nested containers from a flatmap would sometimes fail a
sanity check when removed in the wrong order. This would only fail
sometimes due to map iteration. There was also an off-by-one error in
the prefix check which could match the incorrect keys.
* provider/ns1: Adds ns1 go client through govendor.
* provider/ns1: Removes unused debug line
* docs/ns1: Adds docs around apikey/datasource/datafeed/team/user/record.
* provider/ns1: Gets go vet green
This commit switches out the use of `fmt.Errorf` to `errwrap.Wrapf` in
the `aws_autoscaling_lifecycle_hook` resource, and corrects a typo which
causes the parameter object to be returned to a user rather than the
underlying error.
Allows users from govcloud and other regions (aws-cn) to now use the following resources correctly:
```
- data "aws_billing_service_account"
- data "aws_elb_service_account"
- resource "aws_cloudfront_origin_access_identity"
- resource "aws_ecs_service"
- resource "aws_iam_saml_provider"
- resource "aws_lambda_permission"
- resource "aws_sns_topic_policy"
```
According to the coreos [documentation](https://coreos.com/ignition/docs/latest/configuration.html), systemd units only require the name attribute per each unit. This can also be validated with the CoreOS config validator. This change allows the `ignition_systemd_unit` resource to no longer fail if given an empty `content` and `dropin`.
Also adds a test to cover this use case.
Fixes failing acceptance test:
```
$ make testacc TEST=./builtin/providers/digitalocean TESTARGS='-run=TestAccDigitalOceanVolume_Droplet'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/20 11:38:26 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/digitalocean -v -run=TestAccDigitalOceanVolume_Droplet -timeout 120m
=== RUN TestAccDigitalOceanVolume_Droplet
--- PASS: TestAccDigitalOceanVolume_Droplet (57.38s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/digitalocean 57.411s
```
Also removes all redundant type declarations in the digitalocean package.
* provider/aws: Remove hardcoded https from the ecr repository
When the ECR resource was created, we hardcoded the repository URL to
start with https://
This was a mistake as all interaction with the repository now must
include a replace function for the https:// to "" for this to be usable
We need to note this change in the backward incompatibilities
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSEcrRepository_' ✭
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/20 14:37:36 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSEcrRepository_ -timeout 120m
=== RUN TestAccAWSEcrRepository_importBasic
--- PASS: TestAccAWSEcrRepository_importBasic (20.46s)
=== RUN TestAccAWSEcrRepository_basic
--- PASS: TestAccAWSEcrRepository_basic (18.77s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 39.251s
```
* Update ecr_repository.html.markdown
Fixes AwsS3BucketPolicy Acceptance Tests to match policy document changes from upstream.
```
$ make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSS3BucketPolicy'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/20 11:55:23 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSS3BucketPolicy -timeout 120m
=== RUN TestAccAWSS3BucketPolicy_basic
--- PASS: TestAccAWSS3BucketPolicy_basic (33.64s)
=== RUN TestAccAWSS3BucketPolicy_policyUpdate
--- PASS: TestAccAWSS3BucketPolicy_policyUpdate (61.91s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 95.591s
```
The provisioner collected all inline commands into a single script which meant
only the exit code of the last command was actually checked for an error.
Updates ECS task_definition documentation, and schema validation functions to match the AWS API documentation.
Updates ECS service documentation, and schema validation functions match the AWS API documentation.
* provisioner/chef: Support named run-lists for Policyfiles
Add an optional argument for overriding the Chef Client's initial
run with a named run-list specified by the Policyfile. This is useful
for bootstrapping a node with a one-time setup recipe that deviates
from a policy's normal run-list.
* Update chef client cmd building per review feedback.
* removes region param from backend_service
- this param was not being used in this service
- you need a regional_backend_service if you want to pass this
* deprecated region instead of outright removing
* put session affinity formatting back
* providers/google: add support for encrypting a disk
* providers/google: Add docs for encrypting disks
* providers/google: CSEK small fixes: sensitive params and mismatched state files
This fixes storage related operations for all environments outside of the public
Azure cloud, tested by deploying all storage resources in a German subscription.
* provider/scaleway: fix bootscript tests
the bootscript tests where failing because the referenced bootscript is no
longer available.
for now this just makes the tests pass again, next step should be to lookup a
bootscript so we don't have to update the tests all the time
* provider/scaleway: fix bootscript data source filter bug
when providing a name only the architecture was ignoerd, which can lead to
issues since some bootscript names are identical, even though the architecture
is different.
* provider/scaleway: remove data bootscript exact name test
the test fails after some time because scaleway removes older bootscripts.
let's just settle with filtered tests for now, which don't have this problem.
* Remove contradiction with Scaleway documentation
The parameters previously termed by Terraform:
1. Organization
2. Access key
Are referred to, respectively, by Scaleway [0] as:
1. Access key
2. Token
which is a confusing contradiction for a user.
Since Scaleway terms (1) both 'access key' [0] and 'organization ID' [1],
@nicolai86 suggested keeping the latter as already used, but changing (2) for
'token'; removing the contradiction.
This commit thus changes the parameters to:
1. Organization
2. Token
Closes#10815.
[0] - https://cloud.scaleway.com/#/credentials
[1] - https://www.scaleway.com/docs/retrieve-my-organization-id-throught-the-api
* Update docs to reflect Scaleway offering x86
Scaleway now provides x86 servers [0] as well as ARM.
This commit removes 'ARM' from various references suggesting that might be the
only option.
[0] - https://blog.online.net/2016/03/08/c2-insanely-affordable-x64-servers/
Adds a validation function for cloudflare record types. Also adds an apply-time validation for the record's content based on record type. Currently only validating `A` and `AAAA` records, can be expanded to verify record content for every possible record type in the future.
```
$ make test TEST=./builtin/providers/cloudflare
==> Checking that code complies with gofmt requirements...
==> Checking AWS provider for unchecked errors...
==> NOTE: at this time we only look for uncheck errors in the AWS package
==> Installing errcheck...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/13 14:41:37 Generated command/internal_plugin_list.go
TF_ACC= go test ./builtin/providers/cloudflare -timeout=30s -parallel=4
ok github.com/hashicorp/terraform/builtin/providers/cloudflare 0.018s
```
Fixes: #11173
statistic
Fixes: #11189
This introduces a new parameter and makes an existing parameter from
`required` to `optional` as both cannot be specified together
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSCloudWatchMetricAlarm_' 2 ↵ ✹ ✭
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/13 11:25:24 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSCloudWatchMetricAlarm_ -timeout 120m
=== RUN TestAccAWSCloudWatchMetricAlarm_importBasic
--- PASS: TestAccAWSCloudWatchMetricAlarm_importBasic (19.80s)
=== RUN TestAccAWSCloudWatchMetricAlarm_basic
--- PASS: TestAccAWSCloudWatchMetricAlarm_basic (20.42s)
=== RUN TestAccAWSCloudWatchMetricAlarm_extendedStatistic
--- PASS: TestAccAWSCloudWatchMetricAlarm_extendedStatistic (18.92s)
PASS
```
the CI sees many failing Scaleway tests due to request quotas being exceeded.
this PR aims to address this issue by switching from `resource.Retry`, which
waits 100ms between retries, to `resource.StateChangeConf` with a configured
delay of 5s between retries.
this should help us fixing the quota issue…
* provider/aws: New DataSource: aws_elb_hosted_zone_id
This datasource is a list of all of the ELB DualStack Hosted Zone IDs.
This will allow us to reference the correct hosted zone id when creating
route53 alias records
There are many bugs for this - this is just the beginning of fixing them
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSElbHostedZoneId_basic'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/04 13:04:32 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSElbHostedZoneId_basic -timeout 120m
=== RUN TestAccAWSElbHostedZoneId_basic
--- PASS: TestAccAWSElbHostedZoneId_basic (20.46s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 20.484s
```
* Update elb_hosted_zone_id.html.markdown
us-east-1
Fixes#11175
Because of a previous limitation that codecommit only ran in us-east-1,
we hard coded the session under which it should run. This has caused the
repository to be spun up in the wrong region regardless of what region
was passed to the provider
```
make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSCodeCommitRepository_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/12 16:09:52 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSCodeCommitRepository_ -timeout 120m
=== RUN TestAccAWSCodeCommitRepository_basic
--- PASS: TestAccAWSCodeCommitRepository_basic (23.28s)
=== RUN TestAccAWSCodeCommitRepository_withChanges
--- PASS: TestAccAWSCodeCommitRepository_withChanges (33.71s)
=== RUN TestAccAWSCodeCommitRepository_create_default_branch
--- PASS: TestAccAWSCodeCommitRepository_create_default_branch (22.70s)
=== RUN TestAccAWSCodeCommitRepository_create_and_update_default_branch
--- PASS: TestAccAWSCodeCommitRepository_create_and_update_default_branch (32.72s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 112.437s
```
* Add subnetwork_project field to allow for XPN in GCE instance templates
* Missing os import
* Removing unneeded check
* fix formatting
* Add subnetwork_project to read
* provider/openstack: LoadBalancer Security Groups
This commit adds the ability to specify security groups on a loadbalancer
resource.
* provider/openstack: LoadBalancer Security Groups Refactor
Moving common security group code into a dedicated function.
If an error occurred which prevented the lb sub resources being written to state
then the next apply would fail as the resources would already exist in the API.
go test -c ./builtin/providers/azurerm -o ./builtin/providers/azurerm/test-azurerm
TestAccAzureRMLoadBalancerBackEndAddressPool_reapply
TestAccAzureRMLoadBalancerBackEndAddressPool_removal
TestAccAzureRMLoadBalancerNatPool_basic
TestAccAzureRMLoadBalancerBackEndAddressPool_basic
TestAccAzureRMLoadBalancerNatRule_basic
TestAccAzureRMLoadBalancerNatPool_reapply
TestAccAzureRMLoadBalancerNatPool_removal
TestAccAzureRMLoadBalancerNatPool_update
TestAccAzureRMLoadBalancerProbe_basic
TestAccAzureRMLoadBalancerNatRule_removal
TestAccAzureRMLoadBalancerNatRule_update
TestAccAzureRMLoadBalancerNatRule_reapply
TestAccAzureRMLoadBalancerProbe_removal
TestAccAzureRMLoadBalancerProbe_reapply
TestAccAzureRMLoadBalancerProbe_update
TestAccAzureRMLoadBalancerRule_basic
TestAccAzureRMLoadBalancerRule_inconsistentReads
TestAccAzureRMLoadBalancerRule_removal
TestAccAzureRMLoadBalancerProbe_updateProtocol
TestAccAzureRMLoadBalancer_basic
TestAccAzureRMLoadBalancerRule_update
TestAccAzureRMLoadBalancerRule_reapply
TestAccAzureRMLoadBalancer_frontEndConfig
TestAccAzureRMLoadBalancer_tags
Utilize the ChangeResourceRecordSets to change the type of a record by
deleting and recreating with a new type.
As change batches are considered transactional changes, Amazon Route 53
either makes all or none of the changes in the batch request ensuring the
update will never be partially applied.
Documentation for the `aws_route_table` data source mentions that it supports a route table `id` as an argument, however it was missing from the actual provider code.
Adds in the missing provider code, adds a test, and updates the documentation to use `rtb_id` as the argument, instead of the more ambiguous `id`.
A VPC's main route table has an implicit subnet association, not an explicit subnet association. This caused a Terraform panic when using the `data_source_aws_route_table` resource to query the main route table for a VPC.
This fixes the Terraform panic, and allows the data lookup to complete successfully. Also added an acceptance test to verify the bugfix.
Fixes: #11134
The second step of the `TestAccDigitalOceanDroplet_ResizeWithOutDisk` acceptance test was regularly failing. Upon investigation it was found that the second step's Terraform configuration had omitted the `user_data` parameter, thus forcing Terraform to create a new droplet resource instead of updating the current resource.
```
-/+ digitalocean_droplet.foobar
disk: "20" => "<computed>"
image: "centos-7-x64" => "centos-7-x64"
ipv4_address: "138.197.0.55" => "<computed>"
ipv4_address_private: "" => "<computed>"
ipv6_address: "" => "<computed>"
ipv6_address_private: "" => "<computed>"
locked: "false" => "<computed>"
name: "foo" => "foo"
region: "nyc3" => "nyc3"
resize_disk: "true" => "false"
size: "512mb" => "1gb"
ssh_keys.#: "1" => "1"
ssh_keys.0: "5770472" => "5770472"
status: "active" => "<computed>"
user_data: "foobar" => "" (forces new resource)
vcpus: "1" => "<computed>"
```
This fixes the acceptance test by adding the missing `user_data` parameter.
request_path had Computed enabled which prevented updating it to an empty value
TF_ACC=1 go test ./builtin/providers/azurerm -v -run TestAccAzureRMLoadBalancerProbe -timeout 120m
=== RUN TestAccAzureRMLoadBalancerProbe_basic
--- PASS: TestAccAzureRMLoadBalancerProbe_basic (119.63s)
=== RUN TestAccAzureRMLoadBalancerProbe_removal
--- PASS: TestAccAzureRMLoadBalancerProbe_removal (122.50s)
=== RUN TestAccAzureRMLoadBalancerProbe_update
--- PASS: TestAccAzureRMLoadBalancerProbe_update (129.98s)
=== RUN TestAccAzureRMLoadBalancerProbe_duplicate
--- PASS: TestAccAzureRMLoadBalancerProbe_duplicate (115.22s)
=== RUN TestAccAzureRMLoadBalancerProbe_updateProtocol
--- PASS: TestAccAzureRMLoadBalancerProbe_updateProtocol (127.25s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/azurerm 614.657s
As brought up in #10174, our update_strategy property for instance group
managers in GCP would always be set to "RESTART" on read, even if the
user asked for them to be "NONE" in the config.
This adds a test to ensure that the user wishes were respected, which
fails until we check for update_strategy in the ResourceData before we
update it within the Read function. Because the update_strategy property
doesn't map to anything in the API, we never need to read it from
anywhere but the config, which means the ResourceData should be
considered authoritative by the time we get to the Read function.
The fix for this was provided by @JDiPierro in #10198 originally, but
was missing tests, so it got squashed into this.
* provider/aws: Save disabled ELB accesslogs to state
Save any explicitly disabled access_log to state. Do not save disabled
access_logs if they are not in the configuration.
* test that fails on master
Adds validation for the `type` parameter of an `aws_route53_record` resource.
This will allow Terraform to catch any user errors of a `type` parameter during a `terraform plan` instead of during a `terraform apply`.
Fixes: #11114
* provider/aws: New Resource - aws_codedeploy_deployment_config
* provider/aws: Adding acceptance tests for new
aws_codedeploy_deployment_config resource
* provider/aws: Documentation for the aws_codedeploy_deployment_config resource
* Update codedeploy_deployment_config.html.markdown
subnet_group
Fixes#11024
A change was introduced in 0.8.2 that allows db_instances to change
their db_subnet_group. Unfortunately, this caused an issue for
db_instances that were being restored from snapshot. The restore from
snapshot part of create calls the Update func whereas a normal create
calls the Read func
When calling the Update func, the db_instance was trying to go through a
db_subnet_group_name change and was failing for the following reason:
```
InvalidVPCNetworkStateFault: You cannot move DB instance _rds_instance_name_ to subnet group _subnet_group_name_. The specified DB subnet group and DB instance are in the same VPC. Choose a DB subnet group in different VPC than the specified DB instance and try again.
```
Adds region specific S3 bucket name validation. Currently all regions except for us-east-1 force a dns-compliant naming convention. Thus we cannot utilize the standard `SchemaValidateFunc` interface to validate an S3 bucket name.
This change creates a helper function outside of the schema validation interface so we can validate S3 bucket names for both naming conventions. At a later date, when the us-east-1 region is updated to conform to a dns-compliant naming scheme, we can refactor the `validateS3BucketName` function to fit the `SchemaValidateFunc` interface.
aws_api_gateway_integration_response
This continues the work carried out in #10696
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSAPIGatewayIntegrationResponse_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2017/01/03 14:18:46 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSAPIGatewayIntegrationResponse_ -timeout 120m
=== RUN TestAccAWSAPIGatewayIntegrationResponse_basic
--- PASS: TestAccAWSAPIGatewayIntegrationResponse_basic (57.33s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws57.352s
```
=