The new provider installer code is using a new version constraint parser
because it produces better error messages than the one we were using
before. However, it has some cases where it returns errors that the old
parser (which was entirely regex-match-based) didn't catch.
In the long run we should consistently use the new parser everywhere, but
until then we'll avoid panicking then the two disagree, by returning
diagnostic messages instead of using MustParseVersionConstraints.
For now, we only hit these error cases if the user enters something that
the old parser allows but the new parser does not.
When initializing a configuration which refers to re-namespaced legacy
providers, we attempt to detect this and display a diagnostic message.
Previously this message would direct the user to run the 0.13upgrade
command, but without specifying in which directories.
This commit detects which modules are using the providers in question,
and for local modules displays a list of upgrade commands which specify
the source directories of these modules.
For remote modules, we display a separate list noting that they need to
be upgraded elsewhere, providing both the local module call name and the
module source address.
Providers can be required from multiple sources. The previous
implementation of the providers sub-command displayed only a flat list
of provider requirements, which made it difficult to see which modules
required each provider.
This commit reintroduces the tree display of provider requirements, and
adds a separate output block for providers required by existing state.
addProviderRequirements() was incorrectly using the map keys from the module
provider configs when looking up the provider FQN. The map keys include
alias, so this resulted in a panic. Update addProviderRequirements() to
use the provider's name (only) when looking up the FQN.
We now permit at most one `required_providers` block per module (except
for overrides). This prevents users (and Terraform) from struggling to
understand how to merge multiple `required_providers` configurations,
with `version` and `source` attributes split across multiple blocks.
Because only one `required_providers` block is permitted, there is no
need to concatenate version constraints and resolve them. This allows us
to simplify the structs used to represent provider requirements,
aligning more closely with other structs in this package.
This commit also fixes a semantic use-before-initialize bug, where
resources defined before a `required_providers` block would be unable to
use its source attribute. We achieve this by processing the module's
`required_providers` configuration (and overrides) before resources.
Overrides for `required_providers` work as before, replacing the entire
block per provider.
This PR adds iteration through any provider configuration blocks in the
config in addProviderRequirements().
A stale comment (of mine!) would leave one expecting the
module.ProviderRequirements to include any requirements from provider
configs. The comment was inaccurate and has been updated.
This encapsulates the logic for selecting an implied FQN for an
unqualified type name, which could either come from a local name used in
a module without specifying an explicit source for it or from the prefix
of a resource type on a resource that doesn't explicitly set "provider".
This replaces the previous behavior of just directly calling
NewDefaultProvider everywhere so that we can use a different implication
for the local name "terraform", to refer to the built-in terraform
provider rather than the stale one that's on registry.terraform.io for
compatibility with other Terraform versions.
We've been using the models from the "moduledeps" package to represent our
provider dependencies everywhere since the idea of provider dependencies
was introduced in Terraform 0.10, but that model is not convenient to use
for any use-case other than the "terraform providers" command that needs
individual-module-level detail.
To make things easier for new codepaths working with the new-style
provider installer, here we introduce a new model type
getproviders.Requirements which is based on the type the new installer was
already taking as its input. We have new methods in the states, configs,
and earlyconfig packages to produce values of this type, and a helper
to merge Requirements together so we can combine config-derived and
state-derived requirements together during installation.
The advantage of this new model over the moduledeps one is that all of
recursive module walking is done up front and we produce a simple, flat
structure that is more convenient for the main use-cases of selecting
providers for installation and then finding providers in the local cache
to use them for other operations.
This new model is _not_ suitable for implementing "terraform providers"
because it does not retain module-specific requirement details. Therefore
we will likely keep using moduledeps for "terraform providers" for now,
and then possibly at a later time consider specializing the moduledeps
logic for only what "terraform providers" needs, because it seems to be
the only use-case that needs to retain that level of detail.
Change ModuleInstance to Module in AbsProviderConfig, because providers
need to be handled before module expansion, and should not be used
defined inside an expanded module at all.
Renaming of the addrs type can happen later, when there's less work
in-flight around provider configuration.
* add Config to AttachSchemaTransformer for providerFqn lookup
* terraform: refactor ProvidedBy() to return nil when provider is not set
in config or state
a large refactor to addrs.AbsProviderConfig, embedding the addrs.Provider instead of a Type string. I've added and updated tests, added some Legacy functions to support older state formats and shims, and added a normalization step when reading v4 (current) state files (not the added tests under states/statefile/roundtrip which work with both current and legacy-style AbsProviderConfig strings).
The remaining 'fixme' and 'todo' comments are mostly going to be addressed in a subsequent PR and involve looking up a given local provider config's FQN. This is fine for now as we are only working with default assumption.
This is a stepping-stone PR for the provider source project. In this PR
"legcay-stype" FQNs are created from the provider name string. Future
work involves encoding the FQN directly in the AbsProviderConfig and
removing the calls to addrs.NewLegacyProvider().
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
* huge change to weave new addrs.Provider into addrs.ProviderConfig
* terraform: do not include an empty string in the returned Providers /
Provisioners
- Fixed a minor bug where results included an extra empty string
Previously we were using the experimental HCL 2 repository, but now we'll
shift over to the v2 import path within the main HCL repository as part of
actually releasing HCL 2.0 as stable.
This is a mechanical search/replace to the new import paths. It also
switches to the v2.0.0 release of HCL, which includes some new code that
Terraform didn't previously have but should not change any behavior that
matters for Terraform's purposes.
For the moment the experimental HCL2 repository is still an indirect
dependency via terraform-config-inspect, so it remains in our go.sum and
vendor directories for the moment. Because terraform-config-inspect uses
a much smaller subset of the HCL2 functionality, this does still manage
to prune the vendor directory a little. A subsequent release of
terraform-config-inspect should allow us to completely remove that old
repository in a future commit.
Since schemas are required to interpret provider, resource, and
provisioner attributes in configs, states, and plans, these helpers intend
to make it easier to gather up the the necessary provider types in order
to preload all of the needed schemas before beginning further processing.
Config.ProviderTypes returns directly the list of provider types, since
at this level further detail is not useful: we've not yet run the
provider allocation algorithm, and so the only thing we can reliably
extract here is provider types themselves.
State.ProviderAddrs and Plan.ProviderAddrs each return a list of
absolute provider addresses, which can then be turned into a list of
provider types using the new helper providers.AddressedTypesAbs.
Since we're already using configs.Config throughout core, this also
updates the terraform.LoadSchemas helper to use Config.ProviderTypes
to find the necessary providers, rather than implementing its own
discovery logic. states.State is not yet plumbed in, so we cannot yet
use State.ProviderAddrs to deal with the state but there's a TODO comment
to remind us to update that in a later commit when we swap out
terraform.State for states.State.
A later commit will probably refactor this further so that we can easily
obtain schema for the providers needed to interpret a plan too, but that
is deferred here because further work is required to make core work with
the new plan types first. At that point, terraform.LoadSchemas may become
providers.LoadSchemas with a different interface that just accepts lists
of provider and provisioner names that have been gathered by the caller
using these new helpers.
This is useful for creating a valid placeholder configuration, but not
much else. Most callers should use BuildConfig to build a configuration
that actually has something in it.
We initially just mimicked our old practice of using []string for module
paths here, but the addrs package now gives us a pair of types that better
capture the two different kinds of module addresses we are dealing with:
static addresses (nodes in the configuration tree) and dynamic/instance
addresses (which can represent the situation where multiple instances are
created from a single module call).
This distinction still remains rather artificial since we don't yet have
support for count or for_each on module calls, but this is intended to lay
the foundations for that to be added later, and in the mean time just
gives us some handy helper functions for parsing and formatting these
address types.
This is a rather-messy, complex change to get the "command" package
building again against the new backend API that was updated for
the new configuration loader.
A lot of this is mechanical rewriting to the new API, but
meta_config.go and meta_backend.go in particular saw some major
changes to interface with the new loader APIs and to deal with
the change in order of steps in the backend API.
Previously the behavior for loading and installing modules was included in
the same package as the representation of the module tree (in the
config/module package).
In our new world, the model of a module tree (now called a "Config") is
included in "configs" along with the Module and File structs. This new
package replaces the loading and installation functionality previously
in config/module with new equivalents that work with the model objects
in "configs".
As of this commit, only the loading functionality is implemented. The
installation functionality will follow in subsequent commits.
BuildConfig creates a module tree by recursively walking through module
calls in the root module and any descendent modules. This is intended to
be used both for the simple case of loading already-installed modules and
the more complex case of installing modules inside "terraform init", both
of which will be dealt with in a separate package.
These types represent the individual elements within configuration, the
modules a configuration is made of, and the configuration (static module
tree) itself.
Alisdair McDiarmid