Fixes#9628Fixes#9298
When a route53_record alias is updated in the console, AWS prepends
`dualstack.` to the name. This is there incase IPV6 is wanted. It is
exactly the same without it as it is with it
In order to stop perpetual diffs, I introduced a normalizeFunc that will
that tke alias name and strip known issues:
* dualstack
* trailing dot
This normalize fun will continue to grow I'm sure
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRoute53Record_' ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/29 00:28:12 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRoute53Record_ -timeout 120m
=== RUN TestAccAWSRoute53Record_basic
--- PASS: TestAccAWSRoute53Record_basic (124.64s)
=== RUN TestAccAWSRoute53Record_basic_fqdn
--- PASS: TestAccAWSRoute53Record_basic_fqdn (132.07s)
=== RUN TestAccAWSRoute53Record_txtSupport
--- PASS: TestAccAWSRoute53Record_txtSupport (134.07s)
=== RUN TestAccAWSRoute53Record_spfSupport
--- PASS: TestAccAWSRoute53Record_spfSupport (113.36s)
=== RUN TestAccAWSRoute53Record_generatesSuffix
--- PASS: TestAccAWSRoute53Record_generatesSuffix (112.62s)
=== RUN TestAccAWSRoute53Record_wildcard
--- PASS: TestAccAWSRoute53Record_wildcard (162.84s)
=== RUN TestAccAWSRoute53Record_failover
--- PASS: TestAccAWSRoute53Record_failover (126.18s)
=== RUN TestAccAWSRoute53Record_weighted_basic
--- PASS: TestAccAWSRoute53Record_weighted_basic (121.10s)
=== RUN TestAccAWSRoute53Record_alias
--- PASS: TestAccAWSRoute53Record_alias (118.14s)
=== RUN TestAccAWSRoute53Record_s3_alias
--- PASS: TestAccAWSRoute53Record_s3_alias (155.07s)
=== RUN TestAccAWSRoute53Record_weighted_alias
--- PASS: TestAccAWSRoute53Record_weighted_alias (235.41s)
=== RUN TestAccAWSRoute53Record_geolocation_basic
^[[C--- PASS: TestAccAWSRoute53Record_geolocation_basic (125.32s)
=== RUN TestAccAWSRoute53Record_latency_basic
--- PASS: TestAccAWSRoute53Record_latency_basic (122.23s)
=== RUN TestAccAWSRoute53Record_TypeChange
--- PASS: TestAccAWSRoute53Record_TypeChange (231.98s)
=== RUN TestAccAWSRoute53Record_empty
--- PASS: TestAccAWSRoute53Record_empty (116.48s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 2131.526s
```
Before this fix, I was getting the following by recreating the code in
```
~ aws_route53_record.alias
alias.1563903989.evaluate_target_health: "true" => "false"
alias.1563903989.name: "9828-recreation-106795730.us-west-2.elb.amazonaws.com." => ""
alias.1563903989.zone_id: "Z1H1FL5HABSF5" => ""
alias.318754017.evaluate_target_health: "" => "true"
alias.318754017.name: "" => "9828-recreation-106795730.us-west-2.elb.amazonaws.com"
alias.318754017.zone_id: "" => "Z1H1FL5HABSF5"
Plan: 0 to add, 1 to change, 0 to destroy.
```
After this fix:
```
No changes. Infrastructure is up-to-date. This means that Terraform
could not detect any differences between your configuration and
the real physical resources that exist. As a result, Terraform
doesn't need to do anything.
When creating a CloudWatch Metric for an Application Load Balancer Target Group it is
neccessary to use the suffix of the ARN as the reference to the load
balancer TG . This commit exposes that as an attribute on the `aws_alb_target_group`
resource to prevent the need to use regular expression substitution to
make the reference.
Fixes#8679
The CallerReference attribute we passed to AWS in route53_health_checks
was `time.Now().Format(time.RFC3339Nano)`
When creating multiple resources with the Count meta-parameter, this was
causing issues as follows:
```
* aws_route53_health_check.healthstate.0: HealthCheckAlreadyExists: A different health check has already been created with the specified caller reference.
```
We have now exposed a new attribute called `reference_name` that can be set to pass multiple resources to the request
```
make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSRoute53HealthCheck_' 130 ↵ ✹
==> Cecking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/31 10:41:07 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSRoute53HealthCheck_ -timeout 120m
=== RUN TestAccAWSRoute53HealthCheck_importBasic
--- PASS: TestAccAWSRoute53HealthCheck_importBasic (17.08s)
=== RUN TestAccAWSRoute53HealthCheck_basic
--- PASS: TestAccAWSRoute53HealthCheck_basic (28.17s)
=== RUN TestAccAWSRoute53HealthCheck_withSearchString
--- PASS: TestAccAWSRoute53HealthCheck_withSearchString (28.07s)
=== RUN TestAccAWSRoute53HealthCheck_withChildHealthChecks
--- PASS: TestAccAWSRoute53HealthCheck_withChildHealthChecks (20.71s)
=== RUN TestAccAWSRoute53HealthCheck_IpConfig
--- PASS: TestAccAWSRoute53HealthCheck_IpConfig (16.09s)
=== RUN TestAccAWSRoute53HealthCheck_CloudWatchAlarmCheck
--- PASS: TestAccAWSRoute53HealthCheck_CloudWatchAlarmCheck (22.42s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 132.568s
```
The update of the test was causing a test failure - it was setting
desired_count to 1 when miz_size was set to 2 - this was causing a
perpetual diff in the test
Was failing due to using IAM user `test-name` as it was being used in
more than 1 place - this has been replaced by a random user and random
policy names now
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSUserPolicyAttachment_basic' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/31 08:39:08 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSUserPolicyAttachment_basic -timeout 120m
=== RUN TestAccAWSUserPolicyAttachment_basic
--- PASS: TestAccAWSUserPolicyAttachment_basic (32.04s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 32.053s
```
Previously this resource (and, by extension, the aws_ami_copy and
aws_ami_from_instance resources that share much of its implementation)
was handling correctly the case where an AMI had been recently
deregistered, and was thus still returned from the API, but not correctly
dealing with the situation where the AMI has been removed altogether.
Now we additionally handle the NotFound error returned by the API when
we request a non-existent AMI, and remove the AMI from the state in the
same way we do for deregistered AMIs.
This commit adds an ability to modify the `AutoMinorVersionUpgrade` property of the
Replication Group (which is enabled by default) accordingly.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Fixes#9654
Before the fix, I created an ASG with a schedule on it. Went to the AWS
console and deleted the schedule. A terraform plan looked as follows:
```
% terraform plan
See https://www.terraform.io/docs/internals/internal-plugins.html
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but
will not be persisted to local or remote state storage.
aws_launch_configuration.foobar: Refreshing state... (ID:
terraform-test-foobar5)
aws_autoscaling_group.foobar: Refreshing state... (ID:
terraform-test-foobar5)
aws_autoscaling_schedule.foobar: Refreshing state... (ID: foobar)
Error refreshing state: 1 error(s) occurred:
* aws_autoscaling_schedule.foobar: Unable to find Autoscaling
* Scheduled Action: []*autoscaling.ScheduledUpdateGroupAction(nil)
```
After the fix:
```
terraform plan 1 ↵
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but
will not be persisted to local or remote state storage.
aws_launch_configuration.foobar: Refreshing state... (ID: terraform-test-foobar5)
aws_autoscaling_group.foobar: Refreshing state... (ID: terraform-test-foobar5)
aws_autoscaling_schedule.foobar: Refreshing state... (ID: foobar)
The Terraform execution plan has been generated and is shown below.
Resources are shown in alphabetical order for quick scanning. Green resources
will be created (or destroyed and then created if an existing resource
exists), yellow resources are being changed in-place, and red resources
will be destroyed. Cyan entries are data sources to be read.
Note: You didn't specify an "-out" parameter to save this plan, so when
"apply" is called, Terraform can't guarantee this is what will execute.
+ aws_autoscaling_schedule.foobar
arn: "<computed>"
autoscaling_group_name: "terraform-test-foobar5"
desired_capacity: "0"
end_time: "2018-01-16T13:00:00Z"
max_size: "0"
min_size: "0"
recurrence: "<computed>"
scheduled_action_name: "foobar"
start_time: "2018-01-16T07:00:00Z"
Plan: 1 to add, 0 to change, 0 to destroy.
```
Tests run as expected:
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSAutoscalingSchedule_' 2 ↵ ✹
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/27 17:45:19 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSAutoscalingSchedule_ -timeout 120m
=== RUN TestAccAWSAutoscalingSchedule_basic
--- PASS: TestAccAWSAutoscalingSchedule_basic (140.94s)
=== RUN TestAccAWSAutoscalingSchedule_disappears
--- PASS: TestAccAWSAutoscalingSchedule_disappears (179.17s)
=== RUN TestAccAWSAutoscalingSchedule_recurrence
--- PASS: TestAccAWSAutoscalingSchedule_recurrence (186.72s)
=== RUN TestAccAWSAutoscalingSchedule_zeroValues
--- PASS: TestAccAWSAutoscalingSchedule_zeroValues (167.73s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 674.530s
```
* provider/aws: data source for AWS Security Group
* provider/aws: add documentation for data source for AWS Security Group
* provider/aws: data source for AWS Security Group (improve if condition and syntax)
* fix fmt
* Add AWS Prefix List data source.
AWS Prefix List data source acceptance test.
AWS Prefix List data source documentation.
* Improve error message when PL not matched.
* Clean-up for Go 1.7+ version.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
* Validate regular expression passed via the `name_regex` attribute.
This commit adds a simple ValidateFunc to check whether the regular
expression that was passed down via the `name_regex` attribute is valid.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
This is a fix for issue https://github.com/hashicorp/terraform/issues/9596.
Changes:
- Adds new output attribute `configuration_endpoint_address`. Only
used in Redis when in cluster mode.
- Read the `snapshot_window` and `snapshot_retention_limit` from
the
replication group description instead of the cache cluster
description.
- Adds acceptance test and modifies an existing acceptance test to
make sure that everything is still good in non-cluster mode
- Updates docs to describe new output attribute
This commit introduces an `aws_iam_user_login_profile` resource which
creates a password for an IAM user, and encrypts it using a PGP key
specified in the configuration or obtained from Keybase.
For example:
```
resource "aws_iam_user" "u" {
name = "auser"
path = "/"
force_destroy = true
}
resource "aws_iam_user_login_profile" "u" {
user = "${aws_iam_user.u.name}"
pgp_key = "keybase:some_person_that_exists"
}
output "password" {
value = "${aws_iam_user_login_profile.u.encrypted_password}"
}
```
The resulting attribute "encrypted_password" can be decrypted using
PGP or Keybase - for example:
```
terraform output password | base64 --decode | keybase pgp decrypt
```
Optionally the user can retain the password rather than the default of
being forced to change it at first login. Generated passwords are
currently 20 characters long.
This will allow us to catch errors at plan time rather than waiting for
the API to tell us...
Documentation for IAM User NAme Validation -
http://docs.aws.amazon.com/cli/latest/reference/iam/create-user.html
Documentation for IAM Group Name validation -
http://docs.aws.amazon.com/cli/latest/reference/iam/create-group.html
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSIAMGroup_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/25 13:18:41 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSIAMGroup_
-timeout 120m
=== RUN TestAccAWSIAMGroup_importBasic
--- PASS: TestAccAWSIAMGroup_importBasic (13.80s)
=== RUN TestAccAWSIAMGroup_basic
--- PASS: TestAccAWSIAMGroup_basic (23.30s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws37.121s
```
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSUser_' ✚
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/25 13:22:23 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSUser_ -timeout 120m
=== RUN TestAccAWSUser_importBasic
--- PASS: TestAccAWSUser_importBasic (14.33s)
=== RUN TestAccAWSUser_basic
--- PASS: TestAccAWSUser_basic (25.36s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 39.710s
```
When force_Destroy was specified on an iam_user, only Access Keys were
destroyed. Therefore, if a password was manually added via the AWS
console, it was causing an error as follows:
```
* aws_iam_user.user: Error deleting IAM User test-user-for-profile-delete: DeleteConflict: Cannot delete entity, must delete login profile first.
status code: 409, request id: acd67e40-9aa8-11e6-8533-4db80bad7ea8
```
We now *try* to delete the LoginProfile and ignore a NoSuchEntity error
if it doesn't exist
```
% make testacc TEST=./builtin/providers/aws TESTARGS='-run=TestAccAWSUser_'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /terraform/vendor/)
2016/10/25 12:53:05 Generated command/internal_plugin_list.go
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSUser_
-timeout 120m
=== RUN TestAccAWSUser_importBasic
--- PASS: TestAccAWSUser_importBasic (14.83s)
=== RUN TestAccAWSUser_basic
--- PASS: TestAccAWSUser_basic (24.78s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws39.624s
```
Paul Stack