* huge change to weave new addrs.Provider into addrs.ProviderConfig
* terraform: do not include an empty string in the returned Providers /
Provisioners
- Fixed a minor bug where results included an extra empty string
If a state mv target happens to be a resource that doesn't exist, allow
the creation of the new resource inferring the EachMode from the target
address.
* terraform/context: use new addrs.Provider as map key in provider factories
* added NewLegacyProviderType and LegacyString funcs to make it explicit that these are temporary placeholders
This PR introduces a new concept, provider fully-qualified name (FQN), encapsulated by the `addrs.Provider` struct.
Some of our warnings are produced in response to particular configuration
constructs which might appear many times across a Terraform configuration.
To avoid the warning output dwarfing all of the other output, we'll use
ConsolidateWarnings to limit each distinct warning summary to appear at
most twice, and annotate the final one in the sequence with an additional
paragraph noting that some number of them have been hidden.
This is intended as a compromise to ensure that these warnings are still
seen and noted but to help ensure that we won't produce so many of them
as to distract from other output that appears alongside them.
This applies only to warnings relating to specific configuration ranges;
errors will continue to be shown individually, and sourceless warnings
(which are rare in Terraform today) will likewise remain ungrouped because
they are less likely to be repeating the same statement about different
instances of the same problem throughout the configuration.
Meta.backendConfig was incorrectly treating the second return value from
loadBackendConfig as if it were go "error" rather than
tfdiags.Diagnostics, which in turn meant that it would treat warnings like
errors.
This had confusing results because it still returned that
tfdiags.Diagnostics value in its own diagnostics return value, causing the
caller to see warnings even though the backendConfig function had taken
the error codepath.
We have a special treatment for multi-line strings that are being updated
in-place where we show them across multiple lines in the plan output, but
we didn't use that same treatment for rendering multi-line strings in
isolation such as when they are being added for the first time.
Here we detect when we're rendering a multi-line string in a no-change
situation and render it using the diff renderer instead, using the same
value for old and new and thus producing a multi-line result without any
diff markers at all.
This improves consistency between the change and no-change cases, and
makes multi-line strings (such as YAML in block mode) readable in all
cases.
The DestroyEdgeTransformer cannot determine ordering from the graph when
the destroyers are from orphaned resources, because there are no
references to resolve. The new stored Dependencies provides what we need
to connect the instances in this case.
We also add the StateDependencies method directly in the
GraphNodeResourceInstance interface, since all instances already
implement this, and we don't need another optional interface to check.
The old code in DestroyEdgeTransformer may no longer be needed in the
long run, but that can be determined separately, since too many of the
tests start with an incomplete state and rely on the Dependencies being
determined from the configuration alone.
This "Plan" type, along with the other types it directly or indirectly
embeds and the associated functions, are adaptations of the
flatmap-oriented plan renderer logic from Terraform 0.11 and prior.
The current diff rendering logic is in diff.go, and so the contents of the
plan.go file are defunct apart from the DiffActionSymbol function that
both implementations share. Therefore here we move DiffActionSymbol into
diff.go and then remove plan.go entirely, in the interests of dead code
removal.
During the Terraform 0.12 work we briefly had a partial update of the old
Terraform 0.11 (and prior) diff renderer that could work with the new
plan structure, but could produce only partial results.
We switched to the new plan implementation prior to release, but the
"terraform show" command was left calling into the old partial
implementation, and thus produced incomplete results when rendering a
saved plan.
Here we instead use the plan rendering logic from the "terraform plan"
command, making the output of both identical.
Unfortunately, due to the current backend architecture that logic lives
inside the local backend package, and it contains some business logic
around state and schema wrangling that would make it inappropriate to move
wholesale into the command/format package. To allow for a low-risk fix to
the "terraform show" output, here we avoid some more severe refactoring by
just exporting the rendering functionality in a way that allows the
"terraform show" command to call into it.
In future we'd like to move all of the code that actually writes to the
output into the "command" package so that the roles of these components
are better segregated, but that is too big a change to block fixing this
issue.
We need to be able to reference all possible dependencies for ordering
when the configuration is no longer present, which means that absolute
addresses must be used. Since this is only to recreate the proper
ordering for instance destruction, only resources addresses need to be
listed rather than individual instance addresses.
`marshalPlannedValues` builds a map of modules to their children in
order to output the resource changes in a tree. The map was built from
the list of resource changes. However if a module had no resources
itself, and only called another module (a very normal case), that module
would not get added to the map causing none of its children to be
output in `planned_values`.
This PR adds a walk up through a given module's ancestors to ensure that
each module, even those without resources, would be added.
* command/validate: output a warning if unused flags are set
The -var and -var-file command line flags are accepted, but not used,
in `terraform validate`. This PR adds a warning for users who set either
of those flags, so they know that setting them has no effect.
Terraform Core expects all variables to be set, but for some ancillary
commands it's fine for them to just be set to placeholders because the
variable values themselves are not key to the command's functionality
as long as the terraform.Context is still self-consistent.
For such commands, rather than prompting for interactive input for
required variables we'll just stub them out as unknowns to reflect that
they are placeholders for values that a user would normally need to
provide.
This achieves a similar effect to how these commands behaved before, but
without the tendency to produce a slightly invalid terraform.Context that
would fail in strange ways when asked to run certain operations.
During the 0.12 work we intended to move all of the variable value
collection logic into the UI layer (command package and backend packages)
and present them all together as a unified data structure to Terraform
Core. However, we didn't quite succeed because the interactive prompts
for unset required variables were still being handled _after_ calling
into Terraform Core.
Here we complete that earlier work by moving the interactive prompts for
variables out into the UI layer too, thus allowing us to handle final
validation of the variables all together in one place and do so in the UI
layer where we have the most context still available about where all of
these values are coming from.
This allows us to fix a problem where previously disabling input with
-input=false on the command line could cause Terraform Core to receive an
incomplete set of variable values, and fail with a bad error message.
As a consequence of this refactoring, the scope of terraform.Context.Input
is now reduced to only gathering provider configuration arguments. Ideally
that too would move into the UI layer somehow in a future commit, but
that's a problem for another day.
* command/jsonstate: properly marshal deposed resources
This PR addresses 2 issues: `show -json` would crash if there was not a
`Current` `states.ResourceInstance` for a given resource, and `deposed`
resource instances were not shown at all.
Fixes#22642
Previously we were using the experimental HCL 2 repository, but now we'll
shift over to the v2 import path within the main HCL repository as part of
actually releasing HCL 2.0 as stable.
This is a mechanical search/replace to the new import paths. It also
switches to the v2.0.0 release of HCL, which includes some new code that
Terraform didn't previously have but should not change any behavior that
matters for Terraform's purposes.
For the moment the experimental HCL2 repository is still an indirect
dependency via terraform-config-inspect, so it remains in our go.sum and
vendor directories for the moment. Because terraform-config-inspect uses
a much smaller subset of the HCL2 functionality, this does still manage
to prune the vendor directory a little. A subsequent release of
terraform-config-inspect should allow us to completely remove that old
repository in a future commit.
* command/import: properly use `-provider` supplied on the command line
The import command now attaches the provider configuration in the resource
instance, if set. That config is attached to the NodeAbstractResource
during the import graph building. This prevents errors when the implied
provider is not actually in the configuration at all, which may happen
when a configuration is using the `-beta` version of a provider (and
only that `-beta` version).
* command/import: fix variable reassignment and update docs
Fixes#22564
This was a vestige from earlier prototyping when we were considering
supporting adding credentials to existing .tfrc native syntax files.
However, that proved impractical because the CLI config format is still
HCL 1.0 and that can't reliably perform programmatic surgical updates,
so we'll remove this option for now. We might add it back in later if it
becomes more practical to support it.
These run against a stub OAuth server implementation, verifying that we
are able to run an end-to-end login transaction for both the authorization
code and the password grant types.
This includes adding support for authorization code grants to our stub
OAuth server implementation; it previously supported only the password
grant type.
For unit testing in particular we can't launch a real browser for testing,
so this indirection is primarily to allow us to substitute a mock when
testing a command that can launch a browser.
This includes a simple mock implementation that expects to interact with
a running web server directly.
Because we're going to pass the credentials we obtain on to some
credentials store (either a credentials helper or a local file on disk)
we ought to disclose that first and give the user a chance to cancel out
and set up a different credentials storage mechanism first if desired.
This also includes the very beginnings of support for the owner password
grant type when running against app.terraform.io. This will be used only
temporarily at initial release to allow a faster initial release without
blocking on implementation of a full OAuth flow in Terraform Cloud.
The canonical location of the "template" provider is now in the hashicorp
namespace rather than the terraform-providers namespace, so the output
has changed to reflect that.
A more convenient interface to get a throwaway empty credentials source
for use in tests, which doesn't interact at all with the real CLI
configuration directory.
Previously `terraform console` would output an `init required` error if
it was run in a directory originally `init`ed with a `-plugin-dir`
specified.
Fixes#17826
James Bardin