The "Configuration Language" section was becoming rather unweildy, both
by having a lot of pages and by some of the pages being quite large in
themselves.
This is a first step towards breaking things up a little more, starting
with two changes:
- The "Configuration Language" navigation is now split into two
sub-headings "Configuration Blocks" and "Syntax".
- Some of the information about sub-blocks of the "terraform" block are
now given their own pages, because their content is quite complex
in itself.
- "Version Constraints" is now a page in its own right, rather than this
content being duplicated in slightly different forms across multiple
contexts that make use of user-specified version constraints.
We previously had the module registry protocol documented only as an
undefined subset of the full API of the official registry implementation.
However, the vast majority of endpoints documented in the official API
docs are not needed for a headless third-party module registry that only
intends to make modules available to Terraform CLI.
To make this clearer to potential third-party implementors, and also for
consistency with how the provider registry protocol is now documented,
here we create a new page to describe the subset required for all
registries, and then explain in the docs for the offical API that
potential third-party implementors should refer to the new page instead.
The longer page describing the full API of the official implementations
remains for those who wish to write clients for that API, because it is
part of the API surface area for Terraform Cloud and Terraform Enterprise.
I also took this opportunity to address the fact that module addresses
don't really contain "provider names" at all, but rather than the fourth
field in the address is _conventionally_ an official provider name but
can really be any string that serves to differentiate multiple
implementations of the same abstraction. The new docs therefore refer to
this field as "system" rather than "provider".
Currently the example config for the Consul backend uses a live Consul demo cluster at `demo.consul.io`. This results in TF state with sensitive information and all being stored on a public site when users just copy and paste the config. This PR changes it so that the config address isn't the public demo cluster.
This new command is intended to make it easy to create or update a mirror
directory containing suitable providers for the current configuration,
producing a layout that is appropriate both for a filesystem mirror or,
if copied into the document root of an HTTP server, a network mirror.
This initial version is not customizable aside from being able to select
multiple platforms to install packages for.
Future iterations of this could include commands to turn the JSON index
generation on and off, or to instruct it to produce the unpacked directory
layout instead of the packed directory layout as it currently does. Both
of those options would make the generated directory unsuitable to be
a network mirror, but it would still work as a filesystem mirror.
In the long run this will hopefully form part of a replacement workflow to
terraform-bundle as a way to put copies of providers somewhere so we don't
need to re-download them every time, but some other changes will be needed
outside of just this command before that'd be true, such as adding support
for network and/or filesystem mirrors in Terraform Enterprise.
When helping folks in the community forum, I commonly see questions around
more complex patterns in transforming deep data structures into different
shapes to work with for_each. We have examples of these patterns in the
docs for the functions that they rely on, but they were not previously
very discoverable in the main configuration language documentation
sections.
Here I've moved the "Using Expressions in for_each" subsection on the
Resources page above some of the other sub-sections to hopefully make it
easier to see, and written out in more detail the two specific patterns
that answer a significant number of for_each-related user questions in
the hope that readers will be more likely to realize that the links are
relevant to what their goals.
I also added some more elaboration about the behavior of converting from
list to set in the "Using Sets" subsection, because this feature is often
a user's first encounter with the set data type and I've inferred from
some of the questions I've answered that a number of Terraform users don't
have prior experience with set data types in other languages to draw
assumptions from.
Finally, I added some similar links to the for_each patterns within the
for expression documentation itself, to try to make those examples more
visible to those who might be discovering the documentation in a different
sequence, e.g. by following a deep link shared in an answer to a question
in the community forum.
The "apply" documentation contained a simple typo, while the "plan"
documentation contained outdated information about using
"terraform plan PLANFILE" to view a plan. The latter is now a separate
command entirely, since Terraform 0.12: "terraform show PLANFILE".
This is a baby-step towards an intended future where all Terraform actions
which have side-effects in either remote objects or the Terraform state
can go through the plan+apply workflow.
This initial change is focused only on allowing plan+apply for changes to
root module output values, so that these can be written into a new state
snapshot (for consumption by terraform_remote_state elsewhere) without
having to go outside of the primary workflow by running
"terraform refresh".
This is also better than "terraform refresh" because it gives an
opportunity to review the proposed changes before applying them, as we're
accustomed to with resource changes.
The downside here is that Terraform Core was not designed to produce
accurate changesets for root module outputs. Although we added a place for
it in the plan model in Terraform 0.12, Terraform Core currently produces
inaccurate changesets there which don't properly track the prior values.
We're planning to rework Terraform Core's evaluation approach in a
forthcoming release so it would itself be able to distinguish between the
prior state and the planned new state to produce an accurate changeset,
but this commit introduces a temporary stop-gap solution of implementing
the logic up in the local backend code, where we can freeze a snapshot of
the prior state before we take any other actions and then use that to
produce an accurate output changeset to decide whether the plan has
externally-visible side-effects and render any changes to output values.
This temporary approach should be replaced by a more appropriately-placed
solution in Terraform Core in a release, which should then allow further
behaviors in similar vein, such as user-visible drift detection for
resource instances.
as with this version of this doc users receives a warning like this if them use quotes with parameters of 'on_failure' setting:
"
on_failure = "continue"
In this context, keywords are expected literally rather than in quotes.
Terraform 0.11 and earlier required quotes, but quoted keywords are now
deprecated and will be removed in a future version of Terraform. Remove the
quotes surrounding this keyword to silence this warning.
"
same with:
when = "destroy"
All of the feedback from the experiment described enhancements that can
potentially be added later without breaking changes, so this change simply
removes the experiment gate from the feature as originally implemented
with no changes to its functionality.
Further enhancements may follow in later releases, but the goal of this
change is just to ship the feature exactly as it was under the experiment.
Most of the changes here are cleaning up the experiment opt-ins from our
test cases. The most important parts are in configs/experiments.go and in
experiments/experiment.go .
* website: Edit text of new TF_IGNORE env var docs
Fixing one broken link, and tidying the sentences a bit.
* typo
Co-authored-by: Pam Selle <pam@hashicorp.com>
This example doesn't really show how these values should be used. The
default of retry_on_exit_code is now already when most people want, so
this line is not needed in most cases.
I think the docs describe the new options just fine, so lets leave this
out...
This is an initial draft of documentation for this new feature of the
CLI configuration. This is mainly intended as a placeholder for now,
because there are other documentation updates pending for the new provider
namespacing and installation scheme and we'll likely want to revise these
docs to better complement the broader documentation once it's written.
The providers command has been refactored to use the modern provider types and
ProviderRequirements() functions. This resulted in a breaking change to
the output: it no longer outputs the providers by module and no longer
prints `(inherited)` or `(from state)` to show why a provider is
included. We decided that at this time it was best to stick with the
existing functions and make this change, but if we get feedback from the
community we will revisit.
Additional tests to exercise providers in modules and providers from
state have been included.
A proposed pull request to the AWS provider would change the import behavior of
`aws_security_group`. This preemptive change will help keep the docs accurate if
that gets merged.
Implement a new provider_meta block in the terraform block of modules, allowing provider-keyed metadata to be communicated from HCL to provider binaries.
Bundled in this change for minimal protocol version bumping is the addition of markdown support for attribute descriptions and the ability to indicate when an attribute is deprecated, so this information can be shown in the schema dump.
Co-authored-by: Paul Tyng <paul@paultyng.net>
Previously the templatefile function would permit any arbitrary string as
a variable name, but due to the HCL template syntax it would be impossible
to refer to one that isn't a valid HCL identifier without causing an
HCL syntax error.
The HCL syntax errors are correct, but don't really point to the root
cause of the problem. Instead, we'll pre-verify that the variable names
are valid before we even try to render the template, and given a
specialized error message that refers to the vars argument expression as
the problematic part, which will hopefully make the resolution path
clearer for a user encountering this situation.
The syntax error still remains for situations where all of the variable
names are correct but e.g. the user made a typo referring to one, which
makes sense because in that case the problem _is_ inside the template.
* add TencentCloud COS backend for remote state
* add vendor of dependence
* fixed error not handle and remove default value for prefix argument
* get appid from TF_COS_APPID environment variables
* add setdifference and setsubtract functions and docs
* remove setdifference as it is not implemented correct in underlying lib
* Update setintersection.html.md
* Update setproduct.html.md
* Update setunion.html.md
This guide now lives at:
- https://learn.hashicorp.com/terraform#getting-started
...and terraform.io has been redirecting to there for quite a while. This commit
removes the extra copy so that the text of the two versions doesn't drift, and
updates existing links to point to the new location.
This document now lives at:
- https://learn.hashicorp.com/terraform/development/running-terraform-in-automation
...and terraform.io has been redirecting to there for quite a while. This commit
removes the extra copy so that the text of the two versions doesn't drift, and
updates existing links to point to the new location.
Nick Fagerlund