A longer-form guide will follow in the Sentinel section of the Terraform
Enterprise documentation, once it's ready. For now, this section isn't
saying anything useful since it was always just a stub for a guide we
planned to write later.
The upgrade tool is assuming that a type of "list" means list(string) and
a type of "map" means map(string), because that was what we documented
those as meaning.
In practice, Terraform 0.11 was lacking some validation which allowed
more complex nested structures in some cases even though they were pretty
inconvenient to use due to other language limitations.
The upgrade tool doesn't have enough context to make a reliable decision
on this, so instead we'll rely on the upgrade guide for this. We don't
need a TF-UPGRADE-TODO comment in this case because we reserve those for
things where a subsequent operation might cause the configuration to be
misinterpred, rather than just causing an error. Instead, we'll show an
example of the comment in the upgrade guide so the reader can easily
match it, and give some advice in the guide on how to address it.
We've seen in the past that some users try to use this form with the
ssh:// URL prefix, so we'll mention explicitly that this is invalid and
show a working example of how to use it without the URL scheme prefix.
Our original upgrade guide was drafted while some things were still in
flux and not all of our upgrade tooling was in place yet.
This redraft now attempts to be more specific and direct, showing exact
commands to run and (where relevant) exact error messages that Terraform
might return.
I also took this opportunity for some general copy-editing, though we'll
probably want to do one more pass of that alone (without changing any
content at the same time) before final release.
This new content presumes the existence of a Terraform v0.11.14 release,
which isn't published yet at the time of writing but should be published
before v0.12.0 final, once we've done final verification and review of
the upgrade path including it.
- Note that we intentionally omitted it from the sidebar, to reduce confusion.
- Write a summary up top so you can stop reading sooner if you don't actually need this.
* lang/funcs: testing of functions through the lang package API
The function-specific unit tests do not cover the HCL conversion that happens when the functions are called in a terraform configuration. For e.g., HCL converts sets to lists before passing it to the function. This means that we could not test passing a set in the function _unit_ tests.
This adds a higher-level acceptance test, plus a check that every (pure) function has a test.
* website/docs: update function documentation
There was some leftover v0.11-style interpolation syntax here.
We prefer to use a "naked" expression in situations like this where the result
isn't a string, because interpolations returning non-strings is a common source
of confusion for new users.
The division operator now always performs floating point division, whereas
before it would choose between float and int division based on the types
of its arguments.
We have a specific error message for when a fractional number is used as
an index in HCL, but this additional upgrade guidance provides a specific
solution to the problem: the floor function.
Sadly we don't have enough context in the current design of the upgrade
tool to make this fix automatic. With some refactoring it may be possible
to apply the fix automatically within list brackets, but since that is
a relatively complex change we'll first try this manual solution prompted
by an error message, because in practice so far we've seen this reported
only in the context of list indexing and our error check will catch that
and make the user aware of the need for a fix there.
* funcs/coalesce: return the first non-null, non-empty element from a
sequence.
The go-cty coalesce function, which was originally used here, returns the
first non-null element from a sequence. Terraform 0.11's coalesce,
however, returns the first non-empty string from a list of strings.
This new coalesce function aims to preserve terraform's documented
functionality while adding support for additional argument types. The
tests include those in go-cty and adapted tests from the 0.11 version of
coalesce.
* website/docs: update coalesce function document
The re-introduction of some of the ambiguity between argument and nested
block syntax (for compatibility with existing provider patterns)
unfortunately leads to some interesting consequences for attributes using
this mode.
While the behavior is generally as before in straightforward cases, this
page aims to spell out some of the different usage patterns explicitly
for the benefit of those writing more complex configurations, such as
generic re-usable modules where using argument vs. block syntax leads to
some real differences.
This page is intentionally not linked from anywhere in the part of the
website maintained in the Terraform repository. Instead, it can be linked
from the provider documentation for any argument where this pattern is
used, to help users understand the ways in which that argument might
deviate from the usual behaviors of arguments vs. nested blocks.
Some users are not accustomed to thinking of IP addresses in a bitwise
fashion, so the hope here is to give enough of an introduction to that way
of thinking for the reader to understand what the "newbits" and "netnum"
arguments represent.
The definition of split was referring the built-in function join. However, join is just one of the ways a string might have been created, and this could cause confusion.
In the terraform state documentation the verb "map" is widely used to
describe the relationship between an item in the state and in the real world
whereas the verb "attach" is not used anywhere.
For 0.11 I just specified the naming rules; for 0.12, I added some info about
referencing values and tightened up the layout of the optional arguments.
This commit also syncs up descriptions of `depends_on`.
'legacy' doesn't seem to be a thing anymore, and we were missing some
of the other values for -type. Also -no-color doesn't seem to be
relevant to this command.
1. The double "$" in the template confuses readers
2. As far as I can tell the variable "count" is not used either in this example
(it is in the next example though)
* docs: elaborate on supported remote backend versions
This PR adds a few lines to the docs to indicate which commands are
supported by what version of the remote backend and it makes a
recommendation about which version to use.
* Clarify remote state storage w/ TFE [skip ci]
Specifically, that this is the backend to use with remote state (all
tiers) and Free-Tier vs. Enterprise tiers differ in remote operations
* website: Arrange remote backend info differently
We have released the v0.12-oriented content to the website early in order
to support the beta process, but in some places we neglected to explicitly
mark features or content as being v0.12-only.
Here we add explicit markers to the main cases we've seen where readers
have reported confusion, along with some other tweaks in similar vein.
Terraform is way bigger than the core CLI tools and the language
now, and the docs have grown accordingly. So we're adding a
global index page to help users get around the many sections of the
docs site, and bumping the CLI/core docs down so they're no longer at the
top of the hierarchy.
The "right" (as in, conceptually pure) way to do this would be to actually
create a new level of directory hierarchy in between. But that would be real
expensive and annoying — the amount of 301s and links to edit would be
monumental, and it wouldn't gain us much beyond a certain picture-straightening
satisfaction, so I'm resisting the temptation.
As part of this, I'm copying the entire text of the 0.12
docs/configuration/modules.html page into docs/configuration-0-11/modules.html —
some of the 0.11 pages needed to be able to link to the moved content, I
didn't want to jump versions jarringly, and a close reading didn't reveal
anything in there that's inaccurate for 0.11.
The "terraform fmt" command produces a different canonical form than we
were showing in our examples here. Our examples should always reflect the
conventions applied by "terraform fmt" to avoid confusion.
(This particular decision is a pragmatic one because the formatter design
needs to use the same rules for the colon in the ? : conditional operator
as for the colon in "for" expressions.)
Since references to attributes of resources are by far the most common
reference type, and the mapping of resource type config to the attributes
is not always obvious, here we give some real examples of patterns for
accessing different configuration constructs within resource blocks along
with the resource type's exported attributes.
Since we don't have any real examples of labelled nested blocks yet (the
current SDK doesn't support them) I've included a hypothetical example for
now just to establish the patterns around them in preparation for
beginning to introduce them as we roll out this feature in the SDK.
As well as some general consolidation and reorganizing, this also includes
some updated advice for making the best use of new Terraform v0.12
features to create infrastructure building-blocks.
In particular, the "Module Usage" documentation is now consolidated into
the configuration section in order to bring all of our general language
documentation together, and the top-level "Modules" section is now
primarily focused on module _authors_ as an audience, covering topics such
as publishing modules and designing them for reuse.
* docs: update plan command documentation. Fixes#19235
* docs: added a missing reserved variable name. Fixes#19159.
* website: add note that resource names cannot start with a number
* website: add some notes to the 0.12 upgrade guide
The announcement post contains the information about the temporary
situation where not all of the providers are compatible yet. Linking there
rather than duplicating the information in the upgrade guide means we'll
be able to update in one place as the situation changes.
The upgrade guide had its last major upgrade while we were preparing for
the alpha releases. Now that the upgrade tool is more complete we can
describe the required changes in terms of that tool, and also add
additional information about provider upgrades.
We will revise this at least one more time before v0.12.0 final, but this
is an interim copy of the upgrade guide intended to help those who are
testing the beta releases.
Although /intro/getting-started includes docs content, those pages currently
redirect to the Learn platform, and so shouldn't be affected by the large unfurl
image.
The go-getter library that is used by the module loader validates S3 URLs in the parseURL function. That function assumes path-style URLs and fails on virtual-hosted-style URLs.
In 0.12, the outputs for a data source of terraform_remote_state are
nested under the 'outputs' attribute [1]. This updates the docs
to make this change clearer.
Worked with @radeksimko at Terraform hackday, who has submitted a
related upgrade guide [2]
[1] 1f4d2f4c50/builtin/providers/terraform/data_source_state.go (L16-L43)
[2] d8e00191b7
Because of the different possibilities for arranging the nav sidebars, we want
to make sure:
- IDs for the 0.11 and 0.12 language docs have a common prefix.
- That prefix is not the exact string `docs-config`.
Have I mentioned before that I really dislike this prefix matching behavior.
This is a non-working commit, because a bunch of links (including the sidebar
nav) are broken. Using a transition commit like this makes it easier to see the
changes necessary to get this content woven into the site.
In prior versions, we recommended using hash functions in conjunction with
the file function as an idiom for detecting changes to upstream blobs
without fetching and comparing the whole blob.
That approach relied on us being able to return raw binary data from
file(...). Since Terraform strings pass through intermediate
representations that are not binary-safe (e.g. the JSON state), there was
a risk of string corruption in prior versions which we have avoided for
0.12 by requiring that file(...) be used only with UTF-8 text files.
The specific case of returning a string and immediately passing it into
another function was not actually subject to that corruption risk, since
the HIL interpreter would just pass the string through verbatim, but this
is still now forbidden as a result of the stricter handling of file(...).
To avoid breaking these use-cases, here we introduce variants of the hash
functions a with "file" prefix that take a filename for a disk file to
hash rather than hashing the given string directly. The configuration
upgrade tool also now includes a rule to detect the documented idiom and
rewrite it into a single function call for one of these new functions.
This does cause a bit of function sprawl, but that seems preferable to
introducing more complex rules for when file(...) can and cannot read
binary files, making the behavior of these various functions easier to
understand in isolation.
It's not normally necessary to make explicit type conversions in Terraform
because the language implicitly converts as necessary, but explicit
conversions are useful in a few specialized cases:
- When defining output values for a reusable module, it may be desirable
to force a "cleaner" output type than would naturally arise from a
computation, such as forcing a string containing digits into a number.
- Our 0.12upgrade mechanism will use some of these to replace use of the
undocumented, hidden type conversion functions in HIL, and force
particular type interpretations in some tricky cases.
- We've found that type conversion functions can be useful as _temporary_
workarounds for bugs in Terraform and in providers where implicit type
conversion isn't working correctly or a type constraint isn't specified
precisely enough for the automatic conversion behavior.
These all follow the same convention of being named "to" followed by a
short type name. Since we've had a long-standing convention of running all
the words together in lowercase in function names, we stick to that here
even though some of these names are quite strange, because these should
be rarely-used functions anyway.
The sethaselement, setintersection, and setunion functions are defined in
the cty stdlib. Making them available in Terraform will make it easier to
work with sets, and complement the currently-Terraform-specific setproduct
function.
In the long run setproduct should probably move into the cty stdlib too,
but since it was submitted as a Terraform function originally we'll leave
it here now for simplicity's sake and reorganize later.
In our new world it produces either a set of a tuple type or a list of a
tuple type, depending on the given argument types.
The resulting collection's element tuple type is decided by the element
types of the given collections, allowing type information to propagate
even if unknown values are present.
This document was previously copied to the "Extending Terraform" section (in the
terraform-website repo), and the old URL was redirected so that the copy in
/guides can no longer be reached on the website. But the old copy of the file
remained, and now it runs the risk of confusing contributors, since the copy in
terraform-website/.../docs/extend is the more up-to-date version.
The AWS Go SDK automatically provides a default request retryer with exponential backoff that is invoked via setting `MaxRetries` or leaving it `nil` will default to 3. The terraform-aws-provider `config.Client()` sets `MaxRetries` to 0 unless explicitly configured above 0. Previously, we were not overriding this behavior by setting the configuration and therefore not invoking the default request retryer.
The default retryer already handles HTTP error codes above 500, including S3's InternalError response, so the extraneous handling can be removed. This will also start automatically retrying many additional cases, such as temporary networking issues or other retryable AWS service responses.
Changes:
* s3/backend: Add `max_retries` argument
* s3/backend: Enhance S3 NoSuchBucket error to include additional information
We missed this one on a previous pass of bringing in most of the cty
stdlib functions.
This will resolve#17625 by allowing conversion from Terraform's
conventional RFC 3339 timestamps into various other formats.
This function is similar to the template_file data source offered by the
template provider, but having it built in to the language makes it more
convenient to use, allowing templates to be rendered from files anywhere
an inline template would normally be allowed:
user_data = templatefile("${path.module}/userdata.tmpl", {
hostname = format("petserver%02d", count.index)
})
Unlike the template_file data source, this function allows values of any
type in its variables map, passing them through verbatim to the template.
Its tighter integration with Terraform also allows it to return better
error messages with source location information from the template itself.
The template_file data source was originally created to work around the
fact that HIL didn't have any support for map values at the time, and
even once map support was added it wasn't very usable. With HCL2
expressions, there's little reason left to use a data source to render
a template; the only remaining reason left to use template_file is to
render a template that is constructed dynamically during the Terraform
run, which is a very rare need.
This commit is a wide-ranging set of edits to the pages under
/docs/configuration. Among other things, it
- Separates style conventions out into their own page.
- Separates type constraints and conversion info into their own page.
- Conflates similar complex types a little more freely, since the distinction is
only relevant when restricting inputs for a reusable module or resource.
- Clarifies several concepts that confused me during edits.
* Upgrading to 2.0.0 of github.com/hashicorp/go-azure-helpers
* Support for authenticating using Azure CLI
* backend/azurerm: support for authenticating using the Azure CLI
This change enables a few related use cases:
* AWS has partitions outside Commercial, GovCloud (US), and China, which are the only endpoints automatically handled by the AWS Go SDK. DynamoDB locking and credential verification can not currently be enabled in those regions.
* Allows usage of any DynamoDB-compatible API for state locking
* Allows usage of any IAM/STS-compatible API for credential verification
* backend/azurerm: removing the `arm_` prefix from keys
* removing the deprecated fields test because the deprecation makes it fail
* authentication: support for custom resource manager endpoints
* Adding debug prefixes to the log statements
* adding acceptance tests for msi auth
* including the resource group name in the tests
* backend/azurerm: support for authenticating using a SAS Token
* resolving merge conflicts
* moving the defer to prior to the error
* backend/azurerm: support for authenticating via msi
* adding acceptance tests for msi auth
* including the resource group name in the tests
* support for using the test client via msi
* vendor updates
- updating to v21.3.0 of github.com/Azure/azure-sdk-for-go
- updating to v10.15.4 of github.com/Azure/go-autorest
- vendoring github.com/hashicorp/go-azure-helpers @ 0.1.1
* backend/azurerm: refactoring to use the new auth package
- refactoring the backend to use a shared client via the new auth package
- adding tests covering both Service Principal and Access Key auth
- support for authenticating using a proxy
- rewriting the backend documentation to include examples of both authentication types
* switching to use the build-in logging function
* documenting it's also possible to retrieve the access key from an env var
...and one other reference to the application data directory.
Context:
https://docs.microsoft.com/en-us/windows/desktop/shell/knownfolderid#folderid_roamingappdata
In newer Windows versions, the folder accessible as `%APPDATA%` (and via various
APIs) is actually at something like "documents and settings\user\application
data\roaming", while earlier versions omit the "\roaming" part of the path. This
means you can confuse people by referring to the "application data" directory by
its human name, because "roaming" is the real application data directory, but it
looks like a subdirectory of "application data".
Thus, it's less confusing to just use the `%APPDATA%` variable, with the added
benefit that you can copy and paste the path and it'll just work in most places.
If the user uses the auto-expire value in the backend/swift settings
then swift will automatically delete their Statefile which is likely
something the user doesn't want given how Terraform works.
In the heirarchy, both "Terraform Language" and "Functions" are "up" from
the individual function reference pages, so we'll class them as such to
use the back-facing arrow instead of the forward-facing arrow.
Since the index page is long, by the time the reader reaches the end of
it the relevant portion if the navigation is unlikely to be visible. To
compensate for this, we'll link to the first sub-section and thus give
the user an opportunity to notice the navigation structure for the rest
of the pages.
This has been replaced with an "Expressions" page.
Also includes a number of changes to Markdown style to conform to our
usual conventions, applied automatically by my editor while making these
changes.
This has now been superseded by the expressions.html.md file in the same
directory. As part of deploying this, the former URL for this page must
be redirected to the expressions page to retain a target for any
existing links on third-party sites.
This kinda-weird feature was previously quite severely under-documented in
terms of exactly what effect it has. This new documentation for it first
attempts to frame it as something that should be rarely used, and then
explains in more detail exactly how it behaves for different top-level
block types within the configuration.
As part of revamping the "Configuration" portion of the website for the
v0.12 release, here we update the Terraform Settings page to use a similar
"guide-like" writing style as the other updated pages in this section.
Previously we just listed out all of the functions in alphabetical order
inside the "Interpolation Syntax" page, but that format doesn't leave much
room for details and usage examples.
Now we give each function its own page, and categorize them for easier
navigation. While many functions are very simple and don't really warrant
a full page, certain functions do have additional details that are worth
mentioning and this structure scales better for those more complicated
functions.
So far this includes only the numeric and string functions. Other
categories will follow in subsequent commits.
This rewrite of the "Configuration Syntax" page now gives some more detail
on the top-level structural constructs and de-emphasizes the name "HCL"
as subordinate to "the Terraform language".
It also now includes some commentary on valid identifiers and comments,
and issues around character encodings and line endings.
In addition, we now have a new "Expressions" page that replaces the old
"Interpolation Syntax" page, covering the expression language features
we inherit from HCL and how they behave in the context of Terraform.
The "Expressions" page currently links to a page about the built-in
functions which does not yet exist. This will be created in a later
commit.
This adopts a more guide-like writing style, similar to what prior commits
have done to some other subsections of this section.
The data sources page has not got any real attention since the feature
was first added, and our vocabulary for describing them and their
lifecycle hadn't quite settled when the page was originally written. This
new version is consistent in how it uses "data source" to describe the
feature that providers offer and "data resource" to describe what is
created by a "data" block in configuration, which then allows us to
draw on the many shared features between both data and managed resources.
For the moment this waits until "data resource" is defined in order to
first introduce the qualifier "managed resource". We may wish to revise
this again to mention that more specific nomenclature in passing on the
"Resources" page, in case a user encounters it elsewhere and wants to
learn what it means without needing to be familiar with data resources
first.
This adopts a more guide-like writing style, similar to what prior commits
have done to some other subsections of this section.
Since we already have a whole top-level section devoted to modules, there
is no need for full coverage of all of their features here. Instead, this
section focuses on an an initial introduction to what modules are and
the basics of their usage within the Terraform language. We then link
to the main modules section for the full details.
This adopts a more guide-like writing style, similar to what prior commits
have done to some other subsections of this section.
In the process of writing this, I identified some unclear statements in
the "Resources" subsection, and so these are also revised here for
consistency with the output values documentation.
These revisions reflect this sub-section's new earlier placement in the
sub-section list, leading to a more guide-like style for the initial
sections.
Also includes some minor copy-editing to align terminology with that
introduced in the prior commit for the "Resources" docs page.
This is now the leading subsection of the Configuration section of the
docs, and so this rewrite intends to make it more "guide-like" and as
accessible as possible to those who are not yet familiar with other
Terraform concepts.
This rewrite also attempts to introduce some consistency into our
vocabulary, which should eventually be reflected throughout our
documentation. In particular:
- "Resource" refers to the block the user writes in configuration, while
"Resource _Type_" refers to what the provider defines. We previously
used "resource" for both of these interchangeably.
- "Resource" is no longer used to refer to what gets created and managed
in remote APIs as a result of a resource block in configuration. Lacking
a good distinct name for these, this guide uses the word "object",
qualifying it as "infrastructure object" or "remote object" where
necessary to retain clarity. This distinction is important to enable
a clear description of resource lifecycle.
- "Argument" refers to an element (attribute or block) within a resource
block. This terminology was already being used in some places, so we
embrace it here as a way to distinguish from "attribute", which is
what a resource _exports_ for use in expressions.
- Since interpolation is no longer needed to use expressions in the
language, the word "expression" is used to describe the definition of
a value that might involve some computation. Where necessary, this is
used with a modifier "arbitrary expression" to contrast with situations
where the set of allowed expression constructs is constrained.
The prior content on this page was little more than an instruction to
begin navigating the sub-sections of this section.
The new content aims to give a broad overview of some of the language
concepts and a syntax example, in order to create some context to help
the user navigate the subsections more easily.
This also introduces for the first time usage of the term "the Terraform
language". This was previously left un-named, leading to some awkward
sentence constructions elsewhere in the docs. This new name gives us
some specific terminology to use in order to contrast the language that
exists at Terraform's level of abstraction, defining the semantics, from
the underlying grammar provided by HCL.
With the additional configuration language features coming in Terraform
v0.12, our existing documentation structure is beginning to strain.
Here we reorganize the navigation slightly in order to introduce the
concepts in a more appropriate order so that we can reveal complexity
more gradually. Subsequent commits will revise the content of these
pages to better reflect the new sequencing.
The "Environment Variables" page is moved from the Configuration section
into the "Commands" section, since it is not considered a part of the
configuration language and thus more appropriate in the CLI documentation.
The old placement is reflective of the broader purpose that the
"Configuration" section had originally, but its new focus will be on
the Terraform language (.tf files) in particular, with other aspects of
customizing Terraforms behavior covered in other sections.
website: Reconcile docs about plugin discovery and downloading
I'm attempting to keep things simple for normal users while making sure we've
got the full behavior written down somewhere for plugin developers.
This commit doesn't stand alone; it's paired with a commit in the
terraform-website repo, to deal with some related content in the "extend"
section.
It's been a while since we made any significant updates to this page.
The main theme of this revamp is to ensure that we highlight how to
provide "ambient credentials" for each of the module sources using the
standard mechanisms for each source type.
While there, I also attempted a general cleanup to highlight the main
cases and make this less like a detailed description of all of
go-getter's esoteric features, and did some general copy-editing to write
it in our usual documentation "voice".
Based on some feedback on the initial draft, make some minor updates to
how information is presented in the preview upgrade guide for v0.12.
This also includes some minor copy-editing work to try to make the "voice"
more consistent between different sections of the guide.
After some discussion with "iamakulov" on Twitter it seems that the use
of the word "conflicts" and "merge conflicts" here was sounding like us
implicitly condoning the use of version control as a mechanism for
distributing local state files, which hasn't been recommended for quite
some time since remote state now provides a much more robust solution.
While here, I also tweaked some other language on this page for style and
for use of terminology we more commonly use in our more recent
documentation.
Following the examples as they were previously would cause errors
accessing demo.consul.io. Now we consistently set the scheme to https for
all examples that use demo.consul.io.
This also includes some other updates to the URLs, since the Consul demo
has been rebuilt with a different based configuration, and some general
formatting and copyediting changes in the Consul example.
Create-before-destroy dependencies are automatically ordered correctly
by terraform. Remove the old notice about requiring all dependencies to
have the same setting for create_before_destroy.
In an earlier commit we added the "Best Practices" situation to try to
clarify the intended uses of named workspaces and to warn against using
them as an alternative to system decomposition.
However, the prior statement was cautious in its recommendations in the
interests of being pragmatic, and as a result we've seen that users have
in some cases misunderstood or disregarded these recommendations.
The new "When to use Multiple Workspaces" section aims to be more explicit
that having multiple separate Terraform configurations is the preferred
solution for many use-cases, and that workspaces are intended for a
more limited set of use-cases around convenient development and testing.
It also emphasizes the analogy to version control branches that was just
a footnote in the prior text, to help the reader become familiar with the
concept by relating it to a concept and workflow they are hopefully
already familiar with.
This new section also attempts to provide a more elaborate description of
the proposed alternative when the goal is system decomposition. In the
long run some of this content would probably be better placed elsewhere
since it is useful advice even for users who never discover named
workspaces, but it can live here for the time being to limit the scope of
this change until we are ready to make more comprehensive revisions to
the docs in this area.
Finally, the introductory documentation here is adjusted slightly in
preparation for the intended future expansion of workspaces to include
stored variable values and, for more tailored backends like Terraform
Enterprise, a full log of prior operations. More revisions will be
required to cover the specifics of this later, but this new framing will
hopefully help users form a mental model of named workspaces that has
room for these future enhancements and the corresponding concept in
Terraform Enterprise, rather than our previous framing that workspaces
are fundamentally just named states.
Also:
- In the getting started guide, the TFE content was all tailored to the older
run-locally workflow. I've replaced it with some brief explanation and a link
to the dedicated TFE getting started guide.
- Fixed a sidebar link glitch in the configuration section. (Both "Terraform"
and "Terraform Enterprise" were marked as active if you were on the TFE page.)
- Renamed the "Terraform Enterprise" page "Terraform Push." (Some people have
gotten confused and landed on this page when trying to set up the `atlas`
remote backend.)
provisioner. Also fixes an issue where channels and URLs are
not honored in the initial package install.
Signed-off-by: Rob Campbell <rcampbell@chef.io>
This new argument allows overriding of the working directory of the child process, with the default still being the working directory of Terraform itself.
This change allows the Habitat supervisor service name to be
configurable. Currently it is hard coded to `hab-supervisor`.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
Since an early version of Terraform, the `destroy` command has always
had the `-force` flag to allow an auto approval of the interactive
prompt. 0.11 introduced `-auto-approve` as default to `false` when using
the `apply` command.
The `-auto-approve` flag was introduced to reduce ambiguity of it's
function, but the `-force` flag was never updated for a destroy.
People often use wrappers when automating commands in Terraform, and the
inconsistency between `apply` and `destroy` means that additional logic
must be added to the wrappers to do similar functions. Both commands are
more or less able to run with similar syntax, and also heavily share
their code.
This commit updates the command in `destroy` to use the `-auto-approve` flag
making working with the Terraform CLI a more consistent experience.
We leave in `-force` in `destroy` for the time-being and flag it as
deprecated to ensure a safe switchover period.
When writing an example for a submodule, the example should be placed in
`examples/{example name}` instead of
`modules/{module name}/examples/{example name}`.
We have outgrown the single flat list presentation of providers due to the shear number now present, so we'll move here to a model where the providers are split into a number of categories that each contain a smaller list.
The full list is still included in the body of the main index page for quick access via search, but the categories make for a more accessible navbar for those who are just browsing.
Triton Manta allows an account other than the main triton account to be used via RBAC.
Here we expose the SDC_USER / TRITON_USER options to the backend so that a user can be specified.
Our prevailing writing style is to place punctuation outside of quotes, since in many contexts Terraform itself treats punctuation within quotes as significant and so it can be confusing to use punctuation in quotes in our prose.
* add catagory files
* try new source path
* cleaning up formatting
* fixin
* add all providers to providers index page
* add descriptions
* add link to form and first two providers
* small edits
* small edits
* small changes
* add community providers and decription edit from marketing
* add some lines to improve design
* fix typos
First successful run with private origin and HAB_AUTH_TOKEN set
Update struct, schema, and decodeConfig names to more sensible versions
Cleaned up formatting
Update habitat provisioner docs
Remove unused unitstring
Users commonly ask how the S3 backend can be used in an organization that
splits its infrastructure across many AWS accounts.
We've traditionally shied away from making specific recommendations here
because we can't possibly anticipate the different standards and
regulations that constrain each user. This new section attempts to
describe one possible approach that works well with Terraform's workflow,
with the goal that users make adjustments to it taking into account their
unique needs.
Since we are intentionally not being prescriptive here -- instead
considering this just one of many approaches -- it deviates from our usual
active writing style in several places to avoid giving the impression that
these are instructions to be followed exactly, which in some cases
requires the use of passive voice even though that is contrary to our
documentation style guide. For similar reasons, this section is also
light on specific code examples, since we do not wish to encourage users
to just copy-paste the examples without thinking through the consequences.
* Verify discovery works without trailing slash on discovery URL
* Update registry API docs with browse and search endpoints
* Add sample request/responses
* Add comment to test to indicate expecations
* Fix typo
* Remove trailing slash weirdness
It's important to match the version of local Terraform with the remote Terraform version in Terraform Enterprise when using the "terraform push" command, or else the uploaded configuration package may not be compatible.
This is a genre of invalid output expression that we've seen quite
commonly while testing with 0.11.0-rc1, so we'll call it out specifically
in the upgrade guide and suggest how to fix it.
The differences between the implicit and explicit modes of passing
provider configurations between modules are significant enough to warrant
giving these approaches different names and describing them separately.
This also includes documentation of the current limitation discussed in
#16612, where explicit passing requires a proxy configuration block even
for a _default_ provider configuration, because that limitation is being
accepted for the 0.11.0 release to limit scope.
We are recommending that as of 0.11 all provider configurations be placed
in the root module and, where necessary, be explicitly passed down via
a providers map to customize which configurations are seen by each
child module.
This new section attempts to guide users through such refactoring in the
common case where a child module defines its own provider configuration
based on a value passed in an input variable, and then uses that as
some context to link to the more detailed docs to help those who have
more complex configurations.
The initial pass of this section had some remaining ambiguities, so this
is a second revision that attempts to use terminology more consistently
and to not some additional behaviors that were not described in the
initial version.
We've historically been somewhat inconsistent in how we refer to the
type of object defined by "variable" blocks in configuration. Parts of
our documentation refer to them as "input variables" or just "variables",
while our implementation refers to them as "user variables".
Since Terraform Registry is now also referring to these as "Inputs", here
we standardize on "Input Variable" as the fully-qualified name for this
concept, with "variable" being a shorthand for this where context is
obvious. Outside of this context, anything that can be referred to in
an interpolation expression is generically known as a "variable", with
Input Variables being just one kind, specified by the "var." prefix.
While this terminology shift is not critical yet, it will become more
important as we start to document the new version of the configuration
language so we can use the generic meaning of "variable" there.
The bulk of the text on this page hasn't been revised for some time and
so parts of it were using non-idiomatic terminology or not defining terms
at all.
The main goal of this revision is to standardize on the following terms:
- "provider configuration" refers to a specific provider block in config,
as a distinct idea from the provider _itself_, which is a singleton.
- "Default" vs. "additional" provider configurations, distinguishing
those without and with "alias" arguments respectively. These are named
here so that we can use this terminology to describe the different
behaviors of each for the purposes of provider inheritance between
modules.
The "terraform" provider was previously split out into its own repository,
but that turned out to be a mistake due to how tightly it depends on
aspects of Terraform Core.
Here we prepare to bring it back into the core repository by reorganizing
the directory layout to conform with what's expected there.
This allows the user to customize the location where Terraform stores
the files normally placed in the ".terraform" subdirectory, if e.g. the
current working directory is not writable.
This is a significant rework of the Modules getting started guide to be
in terms of the Consul module available via the Terraform Registry. This
allows us to introduce the registry as part of the tutorial, and also
gives us some auto-generated documentation to link to as context for
the tutorial.
This new module is designed pretty differently than the one we formerly
used, and in particular it doesn't expose any server addresses for the
created Consul cluster -- due to using an auto-scaling group -- and thus
we're forced to use the (arguably-less-compelling) auto-scaling group name
for our output example.
Now includes more complete information on usage of private registries and
updates the module registry API documentation to include the new
version-enumeration endpoint along with describing Terraform's discovery
protocol.
The modules mechanism has changed quite a bit for version 0.11 and so
although simple usage remains broadly compatible there are some
significant changes in the behavior of more complex modules.
Since large parts of this were rewritten anyway, I also took the
opportunity to do some copy-editing to make the prose on this page more
consistent with our usual editorial voice and to wrap the long
lines.
In the 0.10 release we added an opt-in mode where Terraform would prompt
interactively for confirmation during apply. We made this opt-in to give
those who wrap Terraform in automation some time to update their scripts
to explicitly opt out of this behavior where appropriate.
Here we switch the default so that a "terraform apply" with no arguments
will -- if it computes a non-empty diff -- display the diff and wait for
the user to type "yes" in similar vein to the "terraform destroy" command.
This makes the commonly-used "terraform apply" a safe workflow for
interactive use, so "terraform plan" is now mainly for use in automation
where a separate planning step is used. The apply command remains
non-interactive when given an explicit plan file.
The previous behavior -- though not recommended -- can be obtained by
explicitly setting the -auto-approve option on the apply command line,
and indeed that is how all of the tests are updated here so that they can
continue to run non-interactively.
This PR changes manta from being a legacy remote state client to a new backend type. This also includes creating a simple lock within manta
This PR also unifies the way the triton client is configured (the schema) and also uses the same env vars to set the backend up
It is important to note that if the remote state path does not exist, then the backend will create that path. This means the user doesn't need to fall into a chicken and egg situation of creating the directory in advance before interacting with it
This resurrects the previously documented but unused "project" option.
This option is required to create buckets (so they are associated with the
right cloud project) but not to access the buckets later on (because their
names are globally unique).
* Remove the (unused) "project" option.
* Mark the "credentials" option as optional; document behavior when
unset.
* Mark the "path" option as deprecated (was: legacy) to match
Terraform's terminology.
Justin Weissig