We got the replacement for this in earlier than anticipated, so these docs
were originally more pessimistic about when the alternative would be
available.
While we were working on and documenting these it wasn't clear exactly
what Terraform CLI version they would land in, and so we used
"Terraform v1.0" in the docs as a safe bound that was definitely going to
include all of them.
With everything now landed though, we can be more specific about which
v0.15.x minor release each of these appeared in.
Terraform 0.15.3 added support for a `-json` flag to the plan, apply,
and refresh commands, which renders the Terraform UI output in a
structured machine readable format. This commit adds documentation for
this interface.
The current documention was unclear about the full path of local mirrors
when using the XDG Base Directory Specification.
Also removed the trailing slashes for the other paths in this section.
- I'm using distinct subheaders and smaller paragraphs to try and make the info
about apply's two modes more skimmable.
- I'm also adding a separate "Plan Options" subheader (and keeping the section
tiny so it stays snugged up right next to the "Apply Options" one) to make it
extra-clear that Hey, There's More Options, They're Over There.
This is a light revamp of our plan output to make use of Terraform core's
new ability to report both the previous run state and the refreshed state,
allowing us to explicitly report changes made outside of Terraform.
Because whether a plan has "changes" or not is no longer such a
straightforward matter, this now merges views.Operation.Plan with
views.Operation.PlanNoChanges to produce a single function that knows how
to report all of the various permutations. This was also an opportunity
to fill some holes in our previous logic which caused it to produce some
confusing messages, including a new tailored message for when
"terraform destroy" detects that nothing needs to be destroyed.
This also allows users to request the refresh-only planning mode using a
new -refresh-only command line option. In that case, Terraform _only_
performs drift detection, and so applying a refresh-only plan only
involves writing a new state snapshot, without changing any real
infrastructure objects.
Previously the docs for this were rather confusing because they showed an
option to turn _on_ state locking, even though it's on by default.
Instead, we'll now show -lock=false in all cases and document it as
_disabling_ the default locking.
While working on this I also noticed that the equivalent docs on the
website were differently inconsistent. I've not made them fully consistent
here but at least moreso than they were before.
My original motivation here was to add the previously-missing -dry-run
option to the list of options
However, while in the area I noticed that this command hasn't had a
documentation refresh for a while and so I took the opportunity to update
it to match with our current writing style and terminology used in other
parts of the documentation, and so I've rewritten prose elsewhere on the
page to hopefully give the same information in a way that fits in better
with concepts discussed elsewhere in the documentation, and also to try
to add some additional context to connect this information with what
we've described in other places.
This rewrite also drops the example of moving from one "state file" to
another, because that's a legacy usage pattern that isn't supported when
using remote backends, and we recommend most folks to use remote backends
so it's strange to show an example that therefore won't work for most
people. Rather than adding additional qualifiers to that example I chose
to just remove it altogether, because we've generally been working to
de-emphasize these legacy local backend command line options elsewhere in
the documentation.
My original motivation here was to add the previously-missing -dry-run
option to the list of options
However, while in the area I noticed that this command hasn't had a
documentation refresh for a while and so I took the opportunity to update
it to match with our current writing style and terminology used in other
parts of the documentation, and so I've rewritten prose elsewhere on the
page to hopefully give the same information in a way that fits in better
with concepts discussed elsewhere in the documentation, and also to try
to add some additional context to connect this information with what
we've described in other places.
We previously had only very short descriptions of what
-ignore-remote-version does due to having the documentation for it inline
on many different command pages and -help output.
Instead, we'll now centralize the documentation about this argument on
the remote backend page, and link to it or refer to it from all other
locations. This then allows us to spend more words on discussing what
Terraform normally does _without_ this option and warning about the
consequences of using it.
This continues earlier precedent for some local-backend-specific options
which we also don't recommend for typical use. While this does make these
options a little more "buried" than before, that feels justified given
that they are all "exceptional use only" sort of options where users ought
to learn about various caveats before using them.
While there I also took this opportunity to fix some earlier omissions
with the local-backend-specific options and a few other minor consistency
tweaks.
This allows a similar effect to pre-tainting an object but does the action
within the context of a normal plan and apply, avoiding the need for an
intermediate state where the old object still exists but is marked as
tainted.
The core functionality for this was already present, so this commit is
just the UI-level changes to make that option available for use and to
explain how it contributed to the resulting plan in Terraform's output.
It's been a long time since we gave this page an overhaul, and with our
ongoing efforts to make plan and apply incorporate all of the side-effects
that might need to be done against a configuration it seems like a good
time for some restructuring in that vein.
The starting idea here is to formally split the many "terraform plan"
options into a few different categories:
- Planning modes
- Planning options
- Other options
The planning modes and options are the subset that are also accepted by
"terraform apply" when it's running in its default mode of generating a
plan and then prompting for interactive approval of it. This then allows
us to avoid duplicating all of that information on the "terraform apply"
page, and thus allows us to spend more words discussing each of them.
This set of docs is intended as a fresh start into which we'll be able to
more surgically add in the information about -refresh-only and -replace=...
once we have those implemented. Consequently there are some parts of this
which may seem a little overwraught for what it's currently describing;
that's a result of my having prepared this by just deleting the
-refresh-only and -replace=... content from our initial docs draft and
submitted the result, in anticipation of re-adding the parts I've deleted
here in the very near future in other commits.
We have these funny extra options that date back to before Terraform even
had remote state, which we've preserved along the way by most recently
incorporating them as special-case overrides for the local backend.
The documentation we had for these has grown less accurate over time as
the details have shifted, and was in many cases missing the requisite
caveats that they are only for the local backend and that backend
configuration is the modern, preferred way to deal with the use-cases they
were intended for.
We always have a bit of a tension with this sort of legacy option because
we want to keep them documented just enough to be useful to someone who
finds an existing script/etc using them and wants to know what they do,
but not to take up so much space that they might distract users from
finding the modern alternative they should consider instead.
As a compromise in that vein here I've created a new section about these
options under the local backend documentation, which then gives us the
space to go into some detail about the various behaviors and interactions
and also to discuss their history and our recommended alternatives. I then
simplified all of the other mentions of these in command documentation
to just link to or refer to the local backend documentation. My hope then
is that folks who need to know what these do can still find the docs, but
that information can be kept out of the direct path of new users so they
can focus on learning about remote backends instead.
This is certainly not the most ideal thing ever, but it seemed like the
best compromise between the competing priorities I described above.
The traversal value is normally a valid HCL string, but can be
simplified if a traversal step has a complex index value (e.g. an
object). This means it is not always parseable HCL, so this commit
updates the documentation to clarify this and explicitly record that we
do not guarantee its contents are stable. The purpose of these values is
purely for building human-readable UI.
In line with the other complex JSON output formats for plan and provider
schema, here we add an explicit `format_version` field to the JSON
output of terraform validate.
Fixes#27506
Add a new flag `-lockfile=readonly` to `terraform init`.
It would be useful to allow us to suppress dependency lockfile changes
explicitly.
The type of the `-lockfile` flag is string rather than bool, leaving
room for future extensions to other behavior variants.
The readonly mode suppresses lockfile changes, but should verify
checksums against the information already recorded. It should conflict
with the `-upgrade` flag.
Note: In the original use-case described in #27506, I would like to
suppress adding zh hashes, but a test code here suppresses adding h1
hashes because it's easy for testing.
Co-authored-by: Alisdair McDiarmid <alisdair@users.noreply.github.com>
Since this is still at an early phase and likely to change significantly
in future iterations, rather than attempting to guess on a suitable final
location for documenting the testing feature I've instead taken the
unusual approach of adding a new page that is explicitly about the
experiment. My expectation is that once we conclude the experiment we'll
replace this new page with a stub that just explains that there was once
an experiment and then links to whatever final feature unfolded from the
research.
The URL for this page is hard-coded into the warning message in the
"terraform test" command, so as we continue to evolve this feature in
future releases we'll need to update the callout note on the page about
which Terraform CLI version it's currently talking about, so users of
older versions can clearly see when they'd need to upgrade in order to
participate in a later incarnation of the experiment.
To make the command arguments easier to understand and extend, we are
moving away from positional arguments. This commit changes the graph
command to take a `-plan` flag instead of an optional trailing path.
The new nav structure demanded a few new pages that give context about a feature
or workflow. In a few cases, they take text from an existing page.
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
Co-authored-by: Judith Malnick <judith.patudith@gmail.com>
The HashiCorp engineering services team has set up APT and Yum
repositories as alternative installation methods for various HashiCorp
products, now including Terraform.
We don't really have a great place to talk about these in our current
website structure. There is a longer-term plan to revamp the downloads
page to include other options, but we are already getting lots of
questions about how to use these repositories and so my goal here is to
publish at least a first pass of documentation, linked from the Downloads
page sidebar as a placeholder for now, so we'll have somewhere to refer to
when answering such questions.
My intent is that even once we have a revamped Downloads page that
mentions these options more clearly, we'll still need to link out to
another page to talk about various details, and so the two new URLs this
creates would be the home of that content, even if we rewrite the specific
prose here to work better in the context of the new Downloads page.
Martin Atkins