This checking helper is frequently used in provider tests for data
sources, as a shorthand to verify that an attribute of the data source
matches with the corresponding attribute on a managed resource.
Since we now leave empty collections null in more cases, this function is
sometimes effectively asked to verify that a given attribute is _unset_
in both the data source and the resource, so here we slightly adjust the
definition of the check to consider two nulls to be equal to one another,
which at this layer manifests as the keys not being present in the state
attributes map at all.
This check function didn't previously have tests, so this commit also adds
a basic suite of tests, including coverage for the new behavior.
One quirky aspect of our import feature is that we allow the importer to
produce additional resources alongside the one that was imported, such as
to create separate rules for each rule of an imported security group.
Providers need to be able to set the types of these other resources since
they may not match the "main" resource type. They do this by calling
ResourceData.SetType, which in turn sets InstanceState.Ephemeral.Type.
In our shims here we therefore need to copy that out into our new TypeName
field so that the new core import code can see it and create the right
type in the state.
Testing this required a minor change to the test harness to allow the
ImportStateCheck function to see the resource type.
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
Provider tests often rely on checking values contained within sets, by
directly accessing their flatmapped representation. In order to provider
the test harness with the expected set hashes, the sets must be
generated by the schema.Resource itself.
During the test we now build a fixed map of the providers, which should
only contain schema.Provider instances, and pass them into each
TestStep. The individual schema.Resource instances can then be pulled
from the providers, and used to recreate the state from the cty.Value
returned by the core operations.
Stricter type handling in the new shims may add empty containers into
the state where they were previously elided. Since the detection of
missing and empty containers in the legacy state was never reliable,
allow TestCheckNoResourceAttr to succeed if the key is a container count
index, and the value is "0"
Missing containers were often erroneously kept in the state, but since
the addition of the new provider shims, they can often be correctly
eliminated. There are however many tests that check for a "0" count in
the flatmap state when there shouldn't be a key at all. This addition
looks for a container count key and "0" pair, and allows for the key to
be missing.
There may be some tests negatively effected by this which were
legitimately checking for empty containers, but those were also not
reliably detected, and there should be much fewer tests involved.
Due to incorrect use of a loop iterator variable inside a closure, all of
the given providers were ending up with the same factory function.
Now we copy the factory function to a local within the loop first so that
each iteration has its own variable.
This is the second round of similar bugs in this function, so we'll also
add a test case for it to reduce the risk of future regressions given that
most real callers don't exercise this with multiple providers in practice.
We use a shim to convert from the new state model back to the old because
the provider test API is still using the old API throughout. However, the
shim was not preserving the schema version recorded in the new-style state
and so a round-trip through this shim would cause the schema versions to
all revert to zero.
This can cause trouble with the destroy phase of provider tests because
(for API legacy reasons) we round-trip from old state back to new again
before the destroy phase and thus causing the providers to try to upgrade
from state version zero even though the data was already latest, which
can cause errors because state upgrades are generally not idempotent.
This causes the output to include additional helpful context such as
the values of variables referenced in the config, etc. The output is in
the same format as normal Terraform CLI error output, though we don't
retain a source code cache in this codepath so it will not include a
source code snippet.
Previously the test harness was preloading schemas from the providers
before running any test steps.
Since terraform.NewContext already deals with loading provider schemas,
we can instead just use the schemas it loaded for our shimming needs,
avoiding the need to reimplement the schema lookup behavior and thus
the need to create a throwaway provider instance with which to do it.
Previously we were running the factory function only once when
constructing the provider resolver, which means that all contexts created
from that resolver share the same provider instance.
Instead now we will call the given factory function once for each
instantiation, ensuring that each caller ends up with a separate object
as would be the case in real-world use.
The main significant change here is that the package name for the proto
definition is "tfplugin5", which is important because this name is part
of the wire protocol for references to types defined in our package.
Along with that, we also move the generated package into "internal" to
make it explicit that importing the generated Go package from elsewhere is
not the right approach for externally-implemented SDKs, which should
instead vendor the proto definition they are using and generate their
own stubs to ensure that the wire protocol is the only hard dependency
between Terraform Core and plugins.
After this is merged, any provider binaries built against our
helper/schema package will need to be rebuilt so that they use the new
"tfplugin5" package name instead of "proto".
In a future commit we will include more elaborate and organized
documentation on how an external codebase might make use of our RPC
interface definition to implement an SDK, but the primary concern here
is to ensure we have the right wire package name before release.
helper/schema will remove "timeouts" from the config, and stash them in
the diff.Meta map. Terraform sees "timeouts" as a regular config block,
so needs them to be present in the state in order to not show a diff.
Have the GRPCProviderServer shim copy all timeout values into any state
it returns to provide consistent diffs in core.
The helper/resource unit tests will panic, because they were using the
legacy terraform.MockResourceProvider, which doesn't have the same
internals required by the new GRPC shims.
Fail these tests for now, and a new test provider will need to be made
out of a schema.Provider instance.
Use the new SimpleDiff method of the provider so that the diff isn't
altered by ForceNew attributes.
Always set an "id" as RequiresReplace so core knows an instance will be
replaced, even if all ForceNew attributes are filtered out due to
ignore_changes.
An earlier change introduced a new function testConfig to the main code
for this package, which conflicted with a function of the same name in
the test code.
Here we rename the function from the test code, allowing for the more
generally-named testConfig to be the one in the main code.
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.
The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.
The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.
Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
Due to how deeply the configuration types go into Terraform Core, there
isn't a great way to switch out to HCL2 gradually. As a consequence, this
huge commit gets us from the old state to a _compilable_ new state, but
does not yet attempt to fix any tests and has a number of known missing
parts and bugs. We will continue to iterate on this in forthcoming
commits, heading back towards passing tests and making Terraform
fully-functional again.
The three main goals here are:
- Use the configuration models from the "configs" package instead of the
older models in the "config" package, which is now deprecated and
preserved only to help us write our migration tool.
- Do expression inspection and evaluation using the functionality of the
new "lang" package, instead of the Interpolator type and related
functionality in the main "terraform" package.
- Represent addresses of various objects using types in the addrs package,
rather than hand-constructed strings. This is not critical to support
the above, but was a big help during the implementation of these other
points since it made it much more explicit what kind of address is
expected in each context.
Since our new packages are built to accommodate some future planned
features that are not yet implemented (e.g. the "for_each" argument on
resources, "count"/"for_each" on modules), and since there's still a fair
amount of functionality still using old-style APIs, there is a moderate
amount of shimming here to connect new assumptions with old, hopefully in
a way that makes it easier to find and eliminate these shims later.
I apologize in advance to the person who inevitably just found this huge
commit while spelunking through the commit history.
While this initial implementation is a very simple wrapper function, implementing this in the helper/resource package provides some downstream benefits:
* Provides a standard interface for plugin developers to enable parallel acceptance testing
* Existing plugins can simply convert resource.Test to resource.ParallelTest references (as appropriate) to enable the functionality, rather than worrying about additional line(s) to each acceptance test function or TestCase
* Potential enhancements to ParallelTest (e.g. adding an environment variable to skip enabling the behavior) are consistently propagated
This adds the Taint field to the acceptance testing framework, allowing
the ability to pre-taint resources at the beginning of a particular
TestStep. This can be useful for when an explicit ForceNew is required
for a specific resource for troubleshooting things like diff mismatches,
etc.
The field accepts resource addresses as a list of strings. To keep
things simple for the time being, only addresses in the root module are
accepted. If we ever want to expand this past that, I'd be almost
inclined to add some facilities to the core terraform package to help
translate actual module resource addresses (ie:
module.foo.module.bar.some_resource.baz) into the correct state, versus
the current convention in some acceptance testing facilities that take
the module address as a list of strings (ie: []string{"root", "foo",
"bar"}).
This is rarely needed, but sometimes tests need to create temporary files as part of their operation. This should be used sparingly, since it prevents the pro-active cleanup of the temporary working directory.
Looks like while we were checking errors correctly when ExpectError was
set, we weren't checking for the *absence* of an error, which is should
be checked as well (no error is still not the error we are looking for).
Added a few more tests for ExpectError as well.
Validation is the best time to return detailed diagnostics
to the user since we're much more likely to have source
location information, etc than we are in later operations.
This change doesn't actually add any detail to the messages
yet, but it changes the interface so that we can gradually
introduce more detailed diagnostics over time.
While here there are some minor adjustments to some of the
messages to improve their consistency with terminology we
use elsewhere.
Update the command package to use the new module storage. Move the old
command output strings into the module storage itself. This could be
moved back later either by using ui callbacks, or designing a module
storage interface once we know what the final requirements will look
like.
Martin Atkins