The version argument is deprecated in Terraform v0.14 in favor of
required_providers and will be removed in a future version of terraform
(expected to be v0.15). The provider configuration documentation already
discourages use of 'version' inside provider configuration blocks, so it
only needed an extra note that it is actively deprecated.
* Refactor provider validation into separate func & recurse
Refactors the validate provider functions into a separate function
that can recursively search above a module to check and see if
any parents of the module contain count/for_each configs to be
considered
Validate providers in expanding modules. Expanding modules cannot have provider configurations with non-empty configs, which includes having a version configured. If an empty or alias-only block is passed, the provider must be passed through the providers argument on the module call
In an earlier change we switched to defining our own sets of detectors,
getters, etc for go-getter in order to insulate us from upstream changes
to those sets that might otherwise change the user-visible behavior of
Terraform's module installer.
However, we apparently neglected to actually refer to our local set of
detectors, and continued to refer to the upstream set. Here we catch up
with the latest detectors from upstream (taken from the version of
go-getter we currently have vendored) and start using that fixed set.
Currently we are maintaining these custom go-getter sets in two places
due to the configload vs. initwd distinction. That was already true for
goGetterGetters and goGetterDecompressors, and so I've preserved that for
now just to keep this change relatively simple; in later change it would
be nice to factor these "get with go getter" functions out into a shared
location which we can call from both configload and initwd.
Previously we were using the experimental HCL 2 repository, but now we'll
shift over to the v2 import path within the main HCL repository as part of
actually releasing HCL 2.0 as stable.
This is a mechanical search/replace to the new import paths. It also
switches to the v2.0.0 release of HCL, which includes some new code that
Terraform didn't previously have but should not change any behavior that
matters for Terraform's purposes.
For the moment the experimental HCL2 repository is still an indirect
dependency via terraform-config-inspect, so it remains in our go.sum and
vendor directories for the moment. Because terraform-config-inspect uses
a much smaller subset of the HCL2 functionality, this does still manage
to prune the vendor directory a little. A subsequent release of
terraform-config-inspect should allow us to completely remove that old
repository in a future commit.
copyDir is used in configload/getter.go to copy previously downloaded modules instead of using the go-getter client every time. The go-getter client downloads dotfiles, but copyDir did not copy dotfiles, leading to inconsistent behaviour when reusing the same module source.
Previously, adding a version constraint to a module that was previously
recorded without a version in the module manifest would cause a panic.
Instead, we now use a slight variant of the "dependencies have changed"
error that doesn't try to print out a specific version number.
configs/configload and internal/initwd both had a copyDir function that
would fail if the source directory contained a symlinked directory,
because the os.FileMode.IsDir() returns false for symlinks.
This PR adds a check for a symlink and copies that symlink in the
target directory. It handles symlinks for both files and directories
(with included tests).
Fixes#20539
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
Since our new approach here works by installing with a synthetic module
configuration block, we need to treat relative paths as a special case
for two reasons:
- Relative paths in module addresses are relative to the file containing
the call rather than the working directory, but -from-module uses the
working directory (and the call is in a synthetic "file" anyway)
- We need to force Terraform to pass the path through to go-getter rather
than just treating it as a relative reference, since we really do want
a copy of the directory in this case, even if it is local.
To address both of these things, we'll detect a relative path and turn it
into an absolute path before beginning installation. This is a bit hacky,
but this is consistent with the general philosophy of the -from-module
implementation where it does hacky things so that the rest of the
installer code can be spared of dealing with its special cases.
This is covered by a couple of existing tests that run init -from-module,
including TestInit_fromModule_dstInSrc which now passes.
Given a module foo and a module foo/bar, the previous code might
incorrectly treat "bar" as a file within "foo" rather than as a module
directory in its own right.
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.
The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.
The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.
Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
It is common for the same module source package to be referenced multiple
times in the same configuration, either because there are literally
multiple instances of the same module source or because a single package
(or repository) contains multiple modules in sub-directories and many
of them are referenced.
To optimize this, here we introduce a simple caching behavior where the
module installer will detect if it's asked to install multiple times from
the same source and produce the second and subsequent directories by
copying the first, rather than by downloading again over the network.
This optimization is applied once all of the go-getter detection has
completed and sub-directory portions have been trimmed, so it is also
able to normalize differently-specified source addresses that all
ultimately detect to the same resolved address. When installing, we
always extract the entire specified package (or repository) and then
reference the specified sub-directory, so we can safely re-use existing
directories when the base package is the same, even if the sub-directory
is different.
However, as a result we do not yet address the fact that the same package
will be stored multiple times _on disk_, which may still be problematic
when referencing large repositories multiple times in
disk-storage-constrained environments. We could address this in a
subsequent change by investigating the use of symlinks where possible.
Since the Registry installer is implemented just as an extra resolution
step in front of go-getter, this optimization applies to registry
modules too. This does not apply to local relative references, which will
continue to just resolve into the already-prepared directory of their
parent module.
The cache of previously installed paths lives only for the duration of
one call to InstallModules, so we will never re-use directories that
were created by previous runs of "terraform init" and there is no risk
that older versions will pollute the cache when attempting an upgrade
from a source address that doesn't explicitly specify a version.
No additional tests are added here because the existing module installer
tests (when TF_ACC=1) already cover the case of installing multiple
modules from the same source.
Here we introduce a new idea of a "configuration snapshot", which is an
in-memory copy of the source code of each of the files that make up
the configuration. The primary intended purpose for this is as an
intermediate step before writing the configuration files into a plan file,
and then reading them out when that plan file is later applied.
During earlier configs package development we expected to use an afero vfs
implementation to read directly from the zip file, but that doesn't work
in practice because we need to preserve module paths from the source file
system that might include parent directory traversals (../) while
retaining the original path for use in error messages.
The result, for now, is a bit of an abstraction inversion: we implement
a specialized afero vfs implementation that makes the sparse filesystem
representation from a snapshot appear like a normal filesystem just well
enough that the config loader and parser can work with it.
In future we may wish to rework the internals here so that the main
abstraction is at a similar level to the snapshot and then that API is
mapped to the native filesystem in the normal case, removing afero. For
now though, this approach avoids the need for a significant redesign
of the parser/loader internals, at the expense of some trickiness in the
case where we're reading from a snapshot.
This commit does not yet include the reading and writing of snapshots into
plan files. That will follow in a subsequent commit.
addrs.Module is itself internally just []string, but this better
communicates our intent here and makes this integrate better with other
code which is using this type for this purposes.
These utility functions are intended to allow concisely loading a
configuration from a fixture directory in a test, bailing out early if
there are any unexpected errors.
By adding this method you now only have to pass a `*disco.Disco` object around in order to do discovery and use any configured credentials for the discovered hosts.
Of course you can also still pass around both a `*disco.Disco` and a `auth.CredentialsSource` object if there is a need or a reason for that!
Previously we were just loading the module and asserting no diagnostics,
but that is not really good enough since if we install modules incorrectly
it's possible that we are still able to load an empty configuration
successfully.
Now we'll do some basic inspecetion of the module tree that results from
loading what we installed, to ensure that all of the expected modules
are present at the right locations in the tree.
This will provide the functionality of "terraform init -from-module=...",
which uses the contents of a given module to populate the working
directory.
This mechanism is intended for installing e.g. examples from Terraform
Registry or elsewhere. It's not fully-general since it can't reasonably
install a module from a subdir that refers up to a parent directory, but
that isn't an issue for all reasonable uses of this option.
Originally the hope was to use the afero filesystem abstraction for all
loader operations, but since we install modules using go-getter we cannot
(without a lot of refactoring) support vfs for installation.
The vfs use-case is for reading configuration from plan zip files anyway,
and so we have no real reason to support installation into a vfs. For now
at least we will just add the possibility that a loader might not be
install-capable. At the moment we have no non-install-capable loaders, but
we'll add one later once we get to loading configuration from plan files.
Unlike the old installer in config/module, this uses new-style
installation directories that include the static module path so that paths
we show in diagnostics will be more meaningful to the user.
As before, we retrieve the entire "package" associated with the given
source string, rather than any given subdirectory directly, because the
retrieved module may contain ../ references into parent directories which
must be resolvable after extraction.
Enough of the InstallModules method to install local modules (those with
relative paths). "Install" is actually a bit of an exaggeration for these
since we actually just record them in our manifest after verifying that
the source directory exists.
This is a change of behavior relative to the old module installer since
we no longer create a symlink to the module directory inside the
.terraform/modules directory. Instead, we record the module's true
location in our manifest so that the loader will find it later.
The use of a symlink here predated the manifest file. Now that we have a
manifest file the symlinks are redundant. Using the "natural" location of
the module leads to more helpful error messages, since we'll refer to
the module path as the user expects it, rather than to an internal alias.
Previously the behavior for loading and installing modules was included in
the same package as the representation of the module tree (in the
config/module package).
In our new world, the model of a module tree (now called a "Config") is
included in "configs" along with the Module and File structs. This new
package replaces the loading and installation functionality previously
in config/module with new equivalents that work with the model objects
in "configs".
As of this commit, only the loading functionality is implemented. The
installation functionality will follow in subsequent commits.
Kristin Laemmert