# shouldn't it be true if the error count is zero
error_count (number): A zero or positive whole number giving the count of errors Terraform detected. If valid is 'true' then error_count will always be zero, because it is the presence of errors that indicates that a configuration is invalid.
The -var command line option comes with the disadvantage that a user must
contend both with Terraform's own parser and with the parser in whichever
shell they've decided to use, and different shells on different platforms
have different rules.
Previously we've largely just assumed that folks know the appropriate
syntax for the shell they chose, but it seems that command lines involving
spaces and other special characters arise rarely enough in other commands
that Terraform is often the first time someone needs to learn the
appropriate syntax for their shell.
We can't possibly capture all of the details of all shells in our docs,
because that's far outside of our own scope, but hopefully this new
section will go some way to give some real examples that will help folks
figure out how to write suitable escape sequences, if they choose to
set complex variable values on the command line rather than in .tfvars
as we recommend elsewhere on this page.
* command: new command, terraform add, generates resource templates
terraform add ADDRESS generates a resource configuration template with all required (and optionally optional) attributes set to null. This can optionally also pre-populate nonsesitive attributes with values from an existing resource of the same type in state (sensitive vals will be populated with null and a comment indicating sensitivity)
* website: terraform add documentation
* jsonplan and jsonstate: include sensitive_values in state representations
A sensitive_values field has been added to the resource in state and planned values which is a map of all sensitive attributes with the values set to true.
It wasn't entirely clear to me if the values in state would suffice, or if we also need to consult the schema - I believe that this is sufficient for state files written since v0.15, and if that's incorrect or insufficient, I'll add in the provider schema check as well.
I also updated the documentation, and, since we've considered this before, bumped the FormatVersions for both jsonstate and jsonplan.
Seems like we lost a newline in some of the shuffling it took to get this
into the live website, and so it's formatting oddly in the rendered
website. This restores the intended formatting of this as the start of
a bullet list, rather than as a continuation of the previous paragraph.
* clarify input variables opening sentence
* adjust variables description
* claraify providers text and add learn callout
* add description to providers page
* add desscription and clarify provider configuration
* add deprecation note to versions in proivder configs
* add hands on callout and clarify next steps in intro
* link to language collection from language docs
* give more context about configurtion language up front
* clarify output top page
* reorganize for each intro to present feature before notes
* move description before link out and remove passive voice
* fix typo
* clarify purpose of plan
* move explanation before learn link and fully spell boolean
* add a syntax heading to separate intro from details
* add learn callout to module source docs
* clean up intro to provider requirements and add link
* Apply suggestions from code review
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
Our module installer has a somewhat-informal idea of a "module package",
which is some external thing we can go fetch in order to add one or more
modules to the current configuration. Our documentation doesn't talk much
about it because most users seem to have found the distinction between
external and local modules pretty intuitive without us throwing a lot of
funny terminology at them, but there are some situations where the
distinction between a module and a module package are material to the
end-user.
One such situation is when using an absolute rather than relative
filesystem path: we treat that as an external package in order to make the
resulting working directory theoretically "portable" (although users can
do various other things to defeat that), and so Terraform will copy the
directory into .terraform/modules in the same way as it would download and
extract a remote archive package or clone a git repository.
A consequence of this, though, is that any relative paths called from
inside a module loaded from an absolute path will fail if they try to
traverse upward into the parent directory, because at runtime we're
actually running from a copy of the directory that's been taking out of
its original context.
A similar sort of situation can occur in a truly remote module package if
the author accidentally writes a "../" source path that traverses up out
of the package root, and so this commit introduces a special error message
for both situations that tries to be a bit clearer about there being a
package boundary and use that to explain why installation failed.
We would ideally have made escaping local references like that illegal in
the first place, but sadly we did not and so when we rebuilt the module
installer for Terraform v0.12 we ended up keeping the previous behavior of
just trying it and letting it succeed if there happened to somehow be a
matching directory at the given path, in order to remain compatible with
situations that had worked by coincidence rather than intention. For that
same reason, I've implemented this as a replacement error message we will
return only if local module installation was going to fail anyway, and
thus it only modifies the error message for some existing error situations
rather than introducing new error situations.
This also includes some light updates to the documentation to say a little
more about how Terraform treats absolute paths, though aiming not to get
too much into the weeds about module packages since it's something that
most users can get away with never knowing.
We got the replacement for this in earlier than anticipated, so these docs
were originally more pessimistic about when the alternative would be
available.
While we were working on and documenting these it wasn't clear exactly
what Terraform CLI version they would land in, and so we used
"Terraform v1.0" in the docs as a safe bound that was definitely going to
include all of them.
With everything now landed though, we can be more specific about which
v0.15.x minor release each of these appeared in.
Terraform 0.15.3 added support for a `-json` flag to the plan, apply,
and refresh commands, which renders the Terraform UI output in a
structured machine readable format. This commit adds documentation for
this interface.
The current documention was unclear about the full path of local mirrors
when using the XDG Base Directory Specification.
Also removed the trailing slashes for the other paths in this section.
- I'm using distinct subheaders and smaller paragraphs to try and make the info
about apply's two modes more skimmable.
- I'm also adding a separate "Plan Options" subheader (and keeping the section
tiny so it stays snugged up right next to the "Apply Options" one) to make it
extra-clear that Hey, There's More Options, They're Over There.
This is a light revamp of our plan output to make use of Terraform core's
new ability to report both the previous run state and the refreshed state,
allowing us to explicitly report changes made outside of Terraform.
Because whether a plan has "changes" or not is no longer such a
straightforward matter, this now merges views.Operation.Plan with
views.Operation.PlanNoChanges to produce a single function that knows how
to report all of the various permutations. This was also an opportunity
to fill some holes in our previous logic which caused it to produce some
confusing messages, including a new tailored message for when
"terraform destroy" detects that nothing needs to be destroyed.
This also allows users to request the refresh-only planning mode using a
new -refresh-only command line option. In that case, Terraform _only_
performs drift detection, and so applying a refresh-only plan only
involves writing a new state snapshot, without changing any real
infrastructure objects.
Previously the docs for this were rather confusing because they showed an
option to turn _on_ state locking, even though it's on by default.
Instead, we'll now show -lock=false in all cases and document it as
_disabling_ the default locking.
While working on this I also noticed that the equivalent docs on the
website were differently inconsistent. I've not made them fully consistent
here but at least moreso than they were before.
My original motivation here was to add the previously-missing -dry-run
option to the list of options
However, while in the area I noticed that this command hasn't had a
documentation refresh for a while and so I took the opportunity to update
it to match with our current writing style and terminology used in other
parts of the documentation, and so I've rewritten prose elsewhere on the
page to hopefully give the same information in a way that fits in better
with concepts discussed elsewhere in the documentation, and also to try
to add some additional context to connect this information with what
we've described in other places.
This rewrite also drops the example of moving from one "state file" to
another, because that's a legacy usage pattern that isn't supported when
using remote backends, and we recommend most folks to use remote backends
so it's strange to show an example that therefore won't work for most
people. Rather than adding additional qualifiers to that example I chose
to just remove it altogether, because we've generally been working to
de-emphasize these legacy local backend command line options elsewhere in
the documentation.
My original motivation here was to add the previously-missing -dry-run
option to the list of options
However, while in the area I noticed that this command hasn't had a
documentation refresh for a while and so I took the opportunity to update
it to match with our current writing style and terminology used in other
parts of the documentation, and so I've rewritten prose elsewhere on the
page to hopefully give the same information in a way that fits in better
with concepts discussed elsewhere in the documentation, and also to try
to add some additional context to connect this information with what
we've described in other places.
The Git book seems to be using a different anchor format now, and so this
link was previously effectively linking to the page as a whole rather
than to the specific section we're trying to refer to.
We previously had only very short descriptions of what
-ignore-remote-version does due to having the documentation for it inline
on many different command pages and -help output.
Instead, we'll now centralize the documentation about this argument on
the remote backend page, and link to it or refer to it from all other
locations. This then allows us to spend more words on discussing what
Terraform normally does _without_ this option and warning about the
consequences of using it.
This continues earlier precedent for some local-backend-specific options
which we also don't recommend for typical use. While this does make these
options a little more "buried" than before, that feels justified given
that they are all "exceptional use only" sort of options where users ought
to learn about various caveats before using them.
While there I also took this opportunity to fix some earlier omissions
with the local-backend-specific options and a few other minor consistency
tweaks.
* Add link to Modules in Package Sub-directories
Add link to "Modules in Package Sub-directories" section at top of page
* Fix broken links
* Update aws link, fixes missing anchor linkcheck
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
This pattern follows as a natural consequence of how for_each is defined,
but I've noticed from community forum Q&A that newcomers often don't
immediately notice the connection between what for_each expects as input
and what a for_each resource produces as a result, so my aim here is to
show a short example of that in the hope of helping folks see the link
here and get ideas on how to employ the technique in other situations.
The set of paths which caused a resource update to require replacement
has been stored in the plan since 0.15.0 (#28201). This commit adds a
simple JSON representation of these paths, allowing consumers of this
format to determine exactly which paths caused the resource to be
replaced.
This representation is intentionally more loosely encoded than the JSON
state serialization of paths used for sensitive attributes. Instead of a
path step being represented by an object with type and value, we use a
more-JavaScripty heterogenous array of numbers and strings. Any
practical consumer of this format will likely traverse an object tree
using the index operator, which should work more easily with this
format. It also allows easy prefix comparison for consumers which are
tracking paths.
While updating the documentation to include this new field, I noticed
that some others were missing, so added them too.
This allows a similar effect to pre-tainting an object but does the action
within the context of a normal plan and apply, avoiding the need for an
intermediate state where the old object still exists but is marked as
tainted.
The core functionality for this was already present, so this commit is
just the UI-level changes to make that option available for use and to
explain how it contributed to the resulting plan in Terraform's output.
This is a secondary change to PR #28578
Details:
According to the [Provisioner Connection](https://www.terraform.io/docs/language/resources/provisioners/connection.html) page, provisioners require the connection block.
This change of behavior is shown prominently within a note on the [Provisioner Connection](https://www.terraform.io/docs/language/resources/provisioners/connection.html) page:
> Note: In Terraform 0.11 and earlier, providers could set default values for some connection settings, so that connection blocks could sometimes be omitted. This feature was removed in 0.12 in order to make Terraform's behavior more predictable.
However, this behavioral change is omitted from the [remote-exec provisioner](https://www.terraform.io/docs/language/resources/provisioners/remote-exec.html) page which is where a user will be if they are attempting to follow the prior behavior when this was permissible in versions prior to 0.12. This change prompts the user of that change and directs to the connection page.
It's been a long time since we gave this page an overhaul, and with our
ongoing efforts to make plan and apply incorporate all of the side-effects
that might need to be done against a configuration it seems like a good
time for some restructuring in that vein.
The starting idea here is to formally split the many "terraform plan"
options into a few different categories:
- Planning modes
- Planning options
- Other options
The planning modes and options are the subset that are also accepted by
"terraform apply" when it's running in its default mode of generating a
plan and then prompting for interactive approval of it. This then allows
us to avoid duplicating all of that information on the "terraform apply"
page, and thus allows us to spend more words discussing each of them.
This set of docs is intended as a fresh start into which we'll be able to
more surgically add in the information about -refresh-only and -replace=...
once we have those implemented. Consequently there are some parts of this
which may seem a little overwraught for what it's currently describing;
that's a result of my having prepared this by just deleting the
-refresh-only and -replace=... content from our initial docs draft and
submitted the result, in anticipation of re-adding the parts I've deleted
here in the very near future in other commits.
Previously we were repeating some logic in the UI layer in order to
recover relevant additional context about a change to report to a user.
In order to help keep things consistent, and to have a clearer path for
adding more such things in the future, here we capture this user-facing
idea of an "action reason" within the plan model, and then use that
directly in order to decide how to describe the change to the user.
For the moment the "tainted" situation is the only one that gets a special
message, matching what we had before, but we can expand on this in future
in order to give better feedback about the other replace situations too.
This also preemptively includes the "replacing by request" reason, which
is currently not reachable but will be used in the near future as part of
implementing the -replace=... plan command line option to allow forcing
a particular object to be replaced.
So far we don't have any special reasons for anything other than replacing,
which makes sense because replacing is the only one that is in a sense
a special case of another action (Update), but this could expand to
other kinds of reasons in the future, such as explaining which of the
few different reasons a data source read might be deferred until the
apply step.
* lang/funcs: add (console-only) TypeFunction
The type() function, which is only available for terraform console,
prints out the type of a given value. This is mainly intended for
debugging - it's nice to be able to print out terraform's understanding
of a complex variable.
This introduces a new field for Scope: ConsoleMode. When ConsoleMode is true, any additional functions intended for use in the console (only) may be added.
* website: v0.15 upgrade guide for sensitive resource attributes
Our earlier draft of this guide didn't include a section about the
stabilization of the "provider_sensitive_attrs" language experiment. This
new section aims to address the situation where a module might previously
have been returning a sensitive value without having marked it as such,
and thus that module will begin returning an error after upgrading to
Terraform v0.15.
As part of that, I also reviewed the existing documentation about these
features and made some edits aiming to make these four different sections
work well together if users refer to them all at once, as they are likely
to do if they follow the new links from the upgrade guide. I aimed to
retain all of the content we had before, but some of it is now in a new
location.
In particular, I moved the discussion about the v0.14 language experiment
into the upgrade guide, because it seems like a topic only really relevant
to those upgrading from an earlier version and not something folks need to
know about if they are using Terraform for the first time in v0.15 or
later.
* minor fixups
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
In the Terraform language we typically use lists of zero or one values in
some sense interchangably with single values that might be null, because
various Terraform language constructs are designed to work with
collections rather than with nullable values.
In Terraform v0.12 we made the splat operator [*] have a "special power"
of concisely converting from a possibly-null single value into a
zero-or-one list as a way to make that common operation more concise.
In a sense this "one" function is the opposite operation to that special
power: it goes from a zero-or-one collection (list, set, or tuple) to a
possibly-null single value.
This is a concise alternative to the following clunky conditional
expression, with the additional benefit that the following expression is
also not viable for set values, and it also properly handles the case
where there's unexpectedly more than one value:
length(var.foo) != 0 ? var.foo[0] : null
Instead, we can write:
one(var.foo)
As with the splat operator, this is a tricky tradeoff because it could be
argued that it's not something that'd be immediately intuitive to someone
unfamiliar with Terraform. However, I think that's justified given how
often zero-or-one collections arise in typical Terraform configurations.
Unlike the splat operator, it should at least be easier to search for its
name and find its documentation the first time you see it in a
configuration.
My expectation that this will become a common pattern is also my
justification for giving it a short, concise name. Arguably it could be
better named something like "oneornull", but that's a pretty clunky name
and I'm not convinced it really adds any clarity for someone who isn't
already familiar with it.
We previously added a hint to both resource for_each and dynamic blocks
about using the "flatten" and "setproduct" situations to construct
suitable collections to repeat over.
However, we used the same text in both places which ended up stating that
dynamic blocks can only accept map or set values, which is a constraint
that applies to resource for_each (because we need to assign a unique
identifier to each instance) and not to dynamic blocks (which don't have
any uniqueness enforced by Terraform Core itself).
To remove that contradiction with the text above which talks about what
is valid here, I've just generalized this to say "collection", because
the primary point of this paragraph is the "one element per desired nested
block" part, not specifically what sort of collections are permitted in
this location. (Text further up describes the supported types.)
We have these funny extra options that date back to before Terraform even
had remote state, which we've preserved along the way by most recently
incorporating them as special-case overrides for the local backend.
The documentation we had for these has grown less accurate over time as
the details have shifted, and was in many cases missing the requisite
caveats that they are only for the local backend and that backend
configuration is the modern, preferred way to deal with the use-cases they
were intended for.
We always have a bit of a tension with this sort of legacy option because
we want to keep them documented just enough to be useful to someone who
finds an existing script/etc using them and wants to know what they do,
but not to take up so much space that they might distract users from
finding the modern alternative they should consider instead.
As a compromise in that vein here I've created a new section about these
options under the local backend documentation, which then gives us the
space to go into some detail about the various behaviors and interactions
and also to discuss their history and our recommended alternatives. I then
simplified all of the other mentions of these in command documentation
to just link to or refer to the local backend documentation. My hope then
is that folks who need to know what these do can still find the docs, but
that information can be kept out of the direct path of new users so they
can focus on learning about remote backends instead.
This is certainly not the most ideal thing ever, but it seemed like the
best compromise between the competing priorities I described above.
The traversal value is normally a valid HCL string, but can be
simplified if a traversal step has a complex index value (e.g. an
object). This means it is not always parseable HCL, so this commit
updates the documentation to clarify this and explicitly record that we
do not guarantee its contents are stable. The purpose of these values is
purely for building human-readable UI.
These aim to allow hinting to Terraform about situations where it's not
able to automatically infer value sensitivity.
"nonsensitive" is for situations where Terraform's behavior is too
conservative, such as when a new value is derived from a sensitive value
in such a way that all of the sensitive content is removed.
"sensitive", on the other hand, is for situations where Terraform can't
otherwise infer that a value is sensitive. These situations should be
pretty rare in a module that's making effective use of sensitive input
variables and output values, but the documentation shows one example of
an uncommon situation where a more direct hint via this function would
be needed.
Both of these functions are aimed at only occasional use in unusual
situations. They are here for reasons of pragmatism, not because we
expect them to be used routinely or recommend their use.
This is not currently a supported interface, but we plan to release
tool(s) that consume parts of it that are more dependable later,
separately from Terraform CLI itself.
In line with the other complex JSON output formats for plan and provider
schema, here we add an explicit `format_version` field to the JSON
output of terraform validate.
Fixes#27506
Add a new flag `-lockfile=readonly` to `terraform init`.
It would be useful to allow us to suppress dependency lockfile changes
explicitly.
The type of the `-lockfile` flag is string rather than bool, leaving
room for future extensions to other behavior variants.
The readonly mode suppresses lockfile changes, but should verify
checksums against the information already recorded. It should conflict
with the `-upgrade` flag.
Note: In the original use-case described in #27506, I would like to
suppress adding zh hashes, but a test code here suppresses adding h1
hashes because it's easy for testing.
Co-authored-by: Alisdair McDiarmid <alisdair@users.noreply.github.com>
Since this is still at an early phase and likely to change significantly
in future iterations, rather than attempting to guess on a suitable final
location for documenting the testing feature I've instead taken the
unusual approach of adding a new page that is explicitly about the
experiment. My expectation is that once we conclude the experiment we'll
replace this new page with a stub that just explains that there was once
an experiment and then links to whatever final feature unfolded from the
research.
The URL for this page is hard-coded into the warning message in the
"terraform test" command, so as we continue to evolve this feature in
future releases we'll need to update the callout note on the page about
which Terraform CLI version it's currently talking about, so users of
older versions can clearly see when they'd need to upgrade in order to
participate in a later incarnation of the experiment.
* Remove deprecation on undeclared variable
Remove deprecation and add docs specific to the behavior around
undeclared variable values
* Limit full warnings to 2 instances, then summary
This way, the third warning is a summary, rather than the fourth
warning being the summary
To make the command arguments easier to understand and extend, we are
moving away from positional arguments. This commit changes the graph
command to take a `-plan` flag instead of an optional trailing path.
During the language/CLI docs reorg, we noticed several pages that were no longer
viable; some were redundant, some useless, and some just very obsolete.
Since we were trying to avoid breaking links at the time, we opted to remove
them from the navs and leave them as "ghost pages" — still accessible, but not
findable.
This commit finally cleans these ghosts up and updates any remaining links to
relevant modern pages. Bustin' makes me feel good. 👻🚫
This variable mechanism was replaced long ago with a explicit `Allow
destroy plans` setting on a Terraform Cloud workspace, and no longer
does anything: https://www.terraform.io/docs/cloud/workspaces/settings.html#destruction-and-deletion
Rather than mention this new mechanism at all though, I've removed the
requisite from here entirely - the reason being that a consideration
like this is no different from other permission concerns (e.g. "You must
have Apply permission on a workspace to `apply`"), and without
enumerating _all_ of these here - which doesn't seem appropriate - we
just remove this concern entirely.
...and also shrink the explanation for alternate sharing approaches, a bit.
Actually, it looks like I already half-adopted it by accident. 😬 But this
commit adds it to the sidebar under "State", so users can browse to it. I'm
leaving the URL alone, because it's not urgent and we'll need to adjust a large
swath of URLs at some point anyway.
This change effectively stops presenting `terraform` as a provider in the normal
sense, and reduces /docs/providers/terraform/index.html to a ghost page in the
language section (to avoid breaking links for the time being). The message a
reader should get is that Terraform has one special built-in data source where
you don't need to think about the provider or its version.
As of December 18, 2020, we've redirected nearly all of the provider
documentation that used to live on terraform.io:
- For providers that got published on the Registry, we redirected each docs page
to the corresponding Registry docs page.
- For providers that never got adopted by a new publisher, we archived the
GitHub repository and redirected each docs page to the corresponding Markdown
source file on github.com. (For an example of these redirects, see
https://www.terraform.io/docs/providers/telefonicaopencloud/r/s3_bucket.html)
There are ten providers left that we haven't redirected. These ones got adopted
by new publishers and _will_ end up on the Registry, but they aren't quite ready
to ship and get their permanent redirects, and we don't want to sabotage their
SEO by 301ing to a temporary destination.
These links largely still go somewhere useful, but they have some kind of issue
revealed by our new link checker:
- Some of them point to a stale URL that redirects, and can be updated to the
new destination.
- Some of them point to anchors that don't exist (anymore?) in the destination.
- Some of them end up redirecting unnecessarily due to how the server handles
directory URLs without trailing slashes. Sorry, I know that's pointless, just,
humor me for the time being so we can get our CI green. 😭
In a couple cases, I've added invisible anchors to destination pages, either to
preserve an old habit or because the current anchors kind of suck due to being
particularly long or meandering.
* Add limitations section to for_each
Move limitations from a note to their own section,
to allow for expansion on disallowing sensitive values
in for_each
This PR updates the documentation of input variable of terraform. It's
mentioned that multiple `-var` is possible, but no example is given.
This PR adds an example of multiple `-var` option
* command/state list: list resources in nested and expaneded modules
A few distinct bugs fixed in here:
There was a bug in the logic checking if a given module was the child of
the targetAddr, now fixed. That resolved the basic issue where resources
in nested submodules were not listed.
The logic around allowMissing needed some tweaking to allow for empty
modules, as long as those modules had submodules with resources. state
list is the only command using allowMissing with false so this felt safe
to do.
Finally I extended the logic so list would included expanded modules,
which is to say giving module.foo would result in resources from
module.foo[1], module.foo[0], etc.
* update state list docs to show that module filtering includes any nested
modules
So far the output command has had a default output format intended for
human consumption and a JSON output format intended for machine
consumption.
However, until Terraform v0.14 the default output format for primitive
types happened to be _almost_ a raw string representation of the value,
and so users started using that as a more convenient way to access
primitive-typed output values from shell scripts, avoiding the need to
also use a tool like "jq" to decode the JSON.
Recognizing that primitive-typed output values are common and that
processing them with shell scripts is common, this commit introduces a new
-raw mode which is explicitly intended for that use-case, guaranteeing
that the result will always be the direct result of a string conversion
of the output value, or an error if no such conversion is possible.
Our policy elsewhere in Terraform is that we always use JSON for
machine-readable output. We adopted that policy because our other
machine-readable output has typically been complex data structures rather
than single primitive values. A special mode seems justified for output
values because it is common for root module output values to be just
strings, and so it's pragmatic to offer access to the raw value directly
rather than requiring a round-trip through JSON.
This is a repeated cause of confusion and questions in the community
forum, because both JSON and YAML valid syntax are hard to generate using
just string concatenation. Terraform has built-in functions for both of
these common serializations to avoid those problems, and so this will
hopefully make these better alternatives more discoverable.
When we did the earlier documentation rework for Terraform v0.12 we still
had one big "Expressions" page talking about the various operators and
constructs, and so we had to be a bit economical with the details about
some more complicated constructs in order to avoid the page becoming even
more overwhelming.
However, we've recently reorganized the language documentation again so
that the expressions section is split across several separate pages, and
that gives some freedom to go into some more detail about and show longer
examples for certain features.
My changes here are not intended to be an exhaustive rewrite but I did
try to focus on some areas I've commonly seen questions about when helping
in the community forum and elsewhere, and also to create a little more
connectivity between the different content so readers can hopefully find
what they are looking for more easily when they're not yet sure what
terminology to look for.
As of Terraform 0.13+, the get-plugins command has been
superceded by new provider installation mechanisms, and
general philosophy (providers are always installed, but
the sources may be customized). Updat the init command
to give users a warning if they are setting this flag,
to encourage them to remove it from their workflow, and
update relevant docs and docstrings as well
I originally drafted these docs in a context where I was relying on
GitHub's Markdown renderer, and carelessly imported them into the
Terraform website without verifying that the website's Markdown renderer
could process it. This particular quirk has bitten us before: the website
Markdown parser expects follow-on paragraphs in a list item to be indented
at least four spaces, and with less than that it ignores the leading
whitespace altogether and just understands a normal paragraph.
This change will cause the follow-on paragraphs to now correctly render
as part of the bullet points they are intended to be attached to.
This is under a heading "Sensitive Resource Attributes" on the assumption
that if we later stabilize this feature then this heading will live on
with some different content that describes the propagation of sensitive
values from resource attributes, rather than describing the experiment.
The resources, expressions, and modules pages were all split into smaller, more
navigable pages, but the old URLs had accumulated a large number of deep links
to their section headers. To help people recover when they click an old link, we
converted those old URLs to landing pages, which preserve all of the old in-page
anchors and point readers to the appropriate new destinations.
However, because the new link-to-new-page sections are so small, it was kind of
hard to tell which section you had clicked into! Especially if you were near the
bottom of the page and the browser wasn't able to position the desired section
at the very top of the window.
This commit aims to improve that by putting one full screen of whitespace in
between every linkable section on these landing pages. Yes, it's a hack, but
you're meant to only view these pages for three seconds or so before moving on
to the place you wanted to be, and this should help dispel any confusion about
which place that is.
This tutorial uses references to local values, conditional expressions,
and splat expressions, so I've added it to those pages as well as the
expressions overview.
We've historically made statements like this in response to requests for
more customization to the "terraform fmt" behavior, but the documentation
itself was somewhat vague about the intended goals of this command.
This is an attempt to be more explicit that consistency between codebases
is the primary goal of this command, and that the examples in the
Terraform documentation are our main guide for what is "idiomatic style"
when adding additional rules over time.
Nothing here is intended to be new policy, but instead as codifying
positions we've taken elsewhere in the past in the hope of allowing users
to decide how (and whether) they wish to make use of this tool.
When using the enhanced remote backend, a subset of all Terraform
operations are supported. Of these, only plan and apply can be executed
on the remote infrastructure (e.g. Terraform Cloud). Other operations
run locally and use the remote backend for state storage.
This causes problems when the local version of Terraform does not match
the configured version from the remote workspace. If the two versions
are incompatible, an `import` or `state mv` operation can cause the
remote workspace to be unusable until a manual fix is applied.
To prevent this from happening accidentally, this commit introduces a
check that the local Terraform version and the configured remote
workspace Terraform version are compatible. This check is skipped for
commands which do not write state, and can also be disabled by the use
of a new command-line flag, `-ignore-remote-version`.
Terraform version compatibility is defined as:
- For all releases before 0.14.0, local must exactly equal remote, as
two different versions cannot share state;
- 0.14.0 to 1.0.x are compatible, as we will not change the state
version number until at least Terraform 1.1.0;
- Versions after 1.1.0 must have the same major and minor versions, as
we will not change the state version number in a patch release.
If the two versions are incompatible, a diagnostic is displayed,
advising that the error can be suppressed with `-ignore-remote-version`.
When this flag is used, the diagnostic is still displayed, but as a
warning instead of an error.
Commands which will not write state can assert this fact by calling the
helper `meta.ignoreRemoteBackendVersionConflict`, which will disable the
checks. Those which can write state should instead call the helper
`meta.remoteBackendVersionCheck`, which will return diagnostics for
display.
In addition to these explicit paths for managing the version check, we
have an implicit check in the remote backend's state manager
initialization method. Both of the above helpers will disable this
check. This fallback is in place to ensure that future code paths which
access state cannot accidentally skip the remote version check.
The Registry is a web service whose behavior isn't directly tied to Terraform
core's release cycle; therefore, its docs should be decoupled from that release
cycle as well.
https://github.com/hashicorp/terraform-website/pull/1517 adopts the registry
docs into hashicorp/terraform-website, which already hosts several other
corpuses of documentation that aren't tied to Terraform core's version (like
Terraform Cloud, Terraform Enterprise, and Extending Terraform). Once that PR is
merged, we should remove the registry docs from this repository to avoid
confusing anyone.
The local-exec provisioner documentation includes an example which refers
to an attribute of the current resource using its full traversal path,
rather than using "self" as we typically expect.
Due to some coincidences in how Terraform builds the dependency graph,
referring to the resource in this way happens to work when the resource
has only a single instance (the graph builder just skips that
self-referential dependency edge), but it fails if the user later tries
to add "count" or "for_each" to the resource, because at that point all
of the instances become dependent on one another, which creates a
dependency cycle.
Using "self" to access the current instance attributes is the usual
approach, so I've updated the documentation to show that.
As written previously this seemed to suggest using "app.terraform.io" (the
"hostname you use to access the Terraform Cloud application) to access a
private registry in Terraform Enterprise, but that isn't true and I assume
isn't what was intended.
Instead, the hostname for a Terraform Enterprise instance is the hostname
where the Terraform Enterprise application is running, which is both the
hostname where users would find its web UI and the hostname they'd use
to configure the "remote" backend for remote operations and state storage.
In order to be able to predict a result type even if arguments are not yet
known, coalesce requires all of its arguments to be of the same type. Our
usual automatic conversion rules mean that in some cases the result is
a silent type conversion rather than an explicit error, so we'll at least
document that so that folks who encounter it can understand what is
causing the likely-surprising behavior.
If we were building this function over again today I expect we'd make it
always return an error under type mismatch, but to do so now would be a
breaking change and the potential cost of that seems too high for
something that doesn't seem to arise incredibly often in practice.
This one is a lot like the previous two commits, but slightly more complex:
- Only adding one new meta-argument page, for `providers`; otherwise, it just
re-uses the dual-purpose pages I made in the resources commit.
- About that `providers` argument: The stuff that was relevant to consumers of a
module went in that meta-argument page, but there was also a huge deep dive on
how the _author_ of a re-usable module should handle provider configurations
in cases where inheriting the default providers isn't sufficient. THAT, I
moved into a new page in the module development section. (For the consumer of
a module, this should all be an implementation detail; the module README
should tell you which aliased providers you need to configure and pass, and
then you just do it, without worrying about proxy configuration blocks etc.)
- The "standard module structure" recommendations in the main module development
page gets a page of its own, to make it more prominent and discoverable.
- Same deal with using the old URL as a landing page, at least for the main
module calls page. It didn't seem necessary for the module development page.
- Resource behavior gets its own page.
- Meta-arguments all get their own pages.
- Stuff about resource syntax itself gets a page.
In the process of breaking the meta-arguments out into their own pages, I
revised them (with the exception of `provider`) so that they apply to both
resources and modules.
Like with Expressions, this commit repurposes the old resources.html URL as a
landing page for old links.
This commit converts the previous URL for this content to a landing page, which
captures all of the previous in-page anchors and directs readers to the new home
for each section.
For some time now we've been recommending explicitly passing data between
configurations using separate resource types and data sources, rather than
always using terraform_remote_state, for reasons including reducing
coupling between subsystems and allowing a configuration's state snapshots
to be under restrictive access controls.
However, those recommendations have so far not appeared directly in the
documentation for terraform_remote_state, and have instead just been
alluded to elsewhere in the documentation when discussing ways to pass
data between configurations.
This change, then, is an attempt to be clear and explicit about the
recommendation and to give a variety of specific examples of how to
implement it. The terraform_remote_state data source page is admittedly
not the most obvious place in the information architecture to put a set
of alternatives to it, but it does appear that this documentation page is
where people most commonly end up when researching options in this area
and so I've put this here in an attempt to "meet people where they are".
Possibly in a future documentation reorganization we might have an
separate page specifically about sharing data between configurations, but
we don't currently have time to do that bigger reorganization. If we do so
later, the content on this page could potentially be replaced with a
summary of the recommendation and a link to another place for the details,
but the goal here is to make this information visible in the existing
location people look for it, rather than blocking until there's a better
place for it to live.
This also includes a small amount of editing of some existing content on
the page to use terminology and style more similar to how our main
configuration language documentation is written,.
Remove chef, habitat, puppet, and salt-masterless provsioners,
which follows their deprecation. Update the documentatin for these
provisioners to clarify that they have been removed from later versions
of Terraform. Adds the fmt Make target back and updates fmtcheck script
for correctness.
Some hasty, incorrect merge conflict fixing caused this page to have a
strange mix of terminology between "system" and "provider". Along with
that, there were also several editorial errors caused by text on this
page having originally been derived from the provider registry
documentation.
This documentation will now consistently talk about being a module
registry protocol rather than a provider registry protocol, and it will
consistently use the term "system" as a generic term for the final part
of the module source address, aside from noting that there is an optional
convention to name it after the "type" part of an official provider when
possible.
This is a new part of the existing module_variable_optional_attrs
experiment, because it's intended to complement the ability to declare
an input variable whose type constraint is an object type with optional
attributes. Module authors can use this to replace null values (that were
either explicitly set or implied by attribute omission) with other
non-null values of the same type.
This function is a bit more type-fussy than our functions typically are
because it's intended for use primarily with input variables that have
fully-specified type constraints, and thus it uses that type information
to help inform how the defaults data structure should be interpreted.
Other uses of this function will probably be harder today because it takes
a lot of extra annotation to build a value of a specific type if it isn't
passing through a variable type constraint. Perhaps later language
features for more general type conversion will make this more applicable,
but for now the more general form of this problem is better solved other
ways.
The new nav structure demanded a few new pages that give context about a feature
or workflow. In a few cases, they take text from an existing page.
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
Co-authored-by: Judith Malnick <judith.patudith@gmail.com>
The HashiCorp engineering services team has set up APT and Yum
repositories as alternative installation methods for various HashiCorp
products, now including Terraform.
We don't really have a great place to talk about these in our current
website structure. There is a longer-term plan to revamp the downloads
page to include other options, but we are already getting lots of
questions about how to use these repositories and so my goal here is to
publish at least a first pass of documentation, linked from the Downloads
page sidebar as a placeholder for now, so we'll have somewhere to refer to
when answering such questions.
My intent is that even once we have a revamped Downloads page that
mentions these options more clearly, we'll still need to link out to
another page to talk about various details, and so the two new URLs this
creates would be the home of that content, even if we rewrite the specific
prose here to work better in the context of the new Downloads page.
The example configuration now uses Terraform 0.12+ syntax, and the
output examples are up to date with the current text UI. We also add an
explicit recommendation to use the `-json` option for a consistent and
stable output format, for use in automation.
Laura Pacilio