* The index must be non-negative integer
and added instructions on how to get the last value in the list.
* Typo fix
Co-authored-by: Nick Fagerlund <nick@hashicorp.com>
As of this commit, that layout doesn't exist yet, but I'm isolating the one-line
changes to their own commit to try and keep your eyes from glazing over.
We typically try to avoid making subjective, boasty claims in our
documentation in recent times, but there remained both some older
documentation that we've not recently revised and also some newer examples
that are, in retrospect, also perhaps more "boasty" than they need to be.
We prefer not to use this sort of boasty language because not everyone
using Terraform has the same background and experience, and so what is
"easy" or "intuitive" to one person may not be so to another person, and
that should not suggest that the second person is in any way wrong or
inadequate.
In reviewing some of our use of the word "easy" here I tried as much as
possible to surgically revise the existing content without getting drawn
into a big rewrite, but in some cases the content was either pretty
unsalvageable (due to talking about obsolete features that were removed
long ago) or required some broader changes to make the result hopefully
still get the same facts across. In those cases I've both removed some
content entirely or adjusted larger paragraphs.
This was not an exhaustive review and so I'm sure there's still plenty of
room for similar improvements elsewhere. I also resisted the urge to
update some pages that contain outdated information about currently-active
features.
This is an analog to the "alltrue" function, using OR as the reduce
operator rather than AND.
This also includes some simplification of the "alltrue" implementation
to implement it similarly as a sort of reduce operation with AND
as the reduce operator, but with the same effective behavior.
* Fixes#26684
* Update provider-requirements.html.md
Removing additional/extra newlines
* Update provider-requirements.html.md
And now some trailing spaces. le sigh
These were initially introduced as functions with "encode" and "decode"
prefixes, but that doesn't match with our existing convention of putting
the encoding format first so that the encode and decode functions will
group together in a alphabetically-ordered function list.
"text" is not really a defined serialization format, but it's a short word
that hopefully represents well enough what these functions are aiming to
encode and decode, while being consistent with existing functions like
jsonencode/jsondecode, yamlencode/yamldecode, etc.
The "base64" at the end here is less convincing because there is precedent
for that modifier to appear both at the beginning and the end in our
existing function names. I chose to put it at the end here because that
seems to be our emergent convention for situations where the base64
encoding is a sort of secondary modifier alongside the primary purpose
of the function, as we see with "filebase64". (base64gzip is an exception
here, but it seems outvoted by the others.)
This builds on an experimental feature in the underlying cty library which
allows marking specific attribtues of an object type constraint as
optional, which in turn modifies how the cty conversion package handles
missing attributes in a source value: it will silently substitute a null
value of the appropriate type rather than returning an error.
In order to implement the experiment this commit temporarily forks the
HCL typeexpr extension package into a local internal/typeexpr package,
where I've extended the type constraint syntax to allow annotating object
type attributes as being optional using the HCL function call syntax.
If the experiment is successful -- both at the Terraform layer and in
the underlying cty library -- we'll likely send these modifications to
upstream HCL so that other HCL-based languages can potentially benefit
from this new capability.
Because it's experimental, the optional attribute modifier is allowed only
with an explicit opt-in to the module_variable_optional_attrs experiment.
This includes both the main documentation about the lock file itself and
changes to related documentation about Terraform commands that interact
with the lock file.
We will likely continue to update this first pass of documentation as we
get feedback and questions during the prerelease period.
* website: Update all Learn crosslinks
The URL structure on Learn recently changed, so it's time to update some URLs.
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
Move the information about state from the "caveats" to the main
info section, using similar information to sensitive outputs.
Updates the header of the section from similar inspiration.
We can remove the caveat about changing map elements.
Add a little more text about the intended use case for ignore_changes,
as the common case of fixing erroneous provider behavior should not be
the primary motivation for the maintenance of this feature.
This commit adds an `alltrue` function to Terraform configuration. A
reason we might want this function is because it will enable more
powerful custom variable validations. For example:
```hcl
variable "amis" {
type = list(object({
id = string
}))
validation {
condition = (alltrue([
for a in var.amis : length(a.id) > 4 && substr(a.id, 0, 4) == "ami-"
]))
error_message = "The ID of at least one AMI was invalid."
}
}
```
* Adding not about data-sources and depends-on for 0.12 users
* Bold
* A little more markdown
* A little more markdown for data_sources in 0.12
* Some iteration based on good feedback
The version argument is deprecated in Terraform v0.14 in favor of
required_providers and will be removed in a future version of terraform
(expected to be v0.15). The provider configuration documentation already
discourages use of 'version' inside provider configuration blocks, so it
only needed an extra note that it is actively deprecated.
The subtle difference in keywords when creating vs. accessing locals trips
people up, even more than the "variable" vs. "var" distinction. It deserves its
own subheader on the page, plus a nice noisy callout.
I've just wasted an hour to two hours trying to find the problem to finally realize that although I declare a "locals" block, it's referred to as "local". This is pretty weird! So let's be be clear about this.
* Make sidebar nav in language docs more intuitive
* Minor display fixes for registry docs
* Explain providers in the registry in the providers index
* Revise a bunch of language docs around provider reqs
This is mostly an effort to smooth out some of the explanations, make sure
things are presented in a helpful order, make sure terminology lines up, draw
connections between related concepts, make default behavior more apparent, and
the like. It shouldn't include very much new information, but there might be one
or two things that came out of a conversation somewhere.
Co-authored-by: Judith Malnick <judith@hashicorp.com>
As part of documenting the new module for_each capabilities we added a
section noting that shared modules using the legacy pattern of declaring
their own provider configurations would not be compatible with them.
However, that also applies to the new module depends_on and several folks
participating in the beta pointed out that the documentation wasn't
discussing that at all.
In order to generalize the advice, I've moved the old content we had
(since v0.11) recommending against provider configurations in shared
modules out into its own section, now being more explicit that it is
a legacy pattern and not recommended, and then folded the content about
for_each and count, now also including depends_on, into that expanded
section.
As is often the case, that had some knock-on effects on the content on
the rest of this page, so there's some general editing and reorganization
here. In particular, I moved the "Multiple Instances of a Module" section
much further up the page because it's content relevant to users of
shared modules, while the later content on this page is more aimed at
authors of shared modules, including the new section about the legacy
pattern.
We previously covered everything about using providers on a single page,
but that was getting unwieldy already and we now have a lot more to
discuss with v0.13 introducing a new source address syntax and some other
concepts.
Here we split the provider-related content into two parts: "Provider
Requirements" covers how to find and declare dependencies on providers,
and then "Provider Configuration" (formerly just "Providers") then focuses
primarily on how to write zero or more provider configurations for a
particular provider.
Because "Provider Requirements" is now presented before "Provider
Configuration" in the navigation, I've also moved some of the introductory
content about providers in general onto the "Requirements" page. The
first paragraph of that content is duplicated onto the "Configuration"
page for discoverability, but we now link to the requirements page to get
the full story.
The "Configuration Language" section was becoming rather unweildy, both
by having a lot of pages and by some of the pages being quite large in
themselves.
This is a first step towards breaking things up a little more, starting
with two changes:
- The "Configuration Language" navigation is now split into two
sub-headings "Configuration Blocks" and "Syntax".
- Some of the information about sub-blocks of the "terraform" block are
now given their own pages, because their content is quite complex
in itself.
- "Version Constraints" is now a page in its own right, rather than this
content being duplicated in slightly different forms across multiple
contexts that make use of user-specified version constraints.
When helping folks in the community forum, I commonly see questions around
more complex patterns in transforming deep data structures into different
shapes to work with for_each. We have examples of these patterns in the
docs for the functions that they rely on, but they were not previously
very discoverable in the main configuration language documentation
sections.
Here I've moved the "Using Expressions in for_each" subsection on the
Resources page above some of the other sub-sections to hopefully make it
easier to see, and written out in more detail the two specific patterns
that answer a significant number of for_each-related user questions in
the hope that readers will be more likely to realize that the links are
relevant to what their goals.
I also added some more elaboration about the behavior of converting from
list to set in the "Using Sets" subsection, because this feature is often
a user's first encounter with the set data type and I've inferred from
some of the questions I've answered that a number of Terraform users don't
have prior experience with set data types in other languages to draw
assumptions from.
Finally, I added some similar links to the for_each patterns within the
for expression documentation itself, to try to make those examples more
visible to those who might be discovering the documentation in a different
sequence, e.g. by following a deep link shared in an answer to a question
in the community forum.
All of the feedback from the experiment described enhancements that can
potentially be added later without breaking changes, so this change simply
removes the experiment gate from the feature as originally implemented
with no changes to its functionality.
Further enhancements may follow in later releases, but the goal of this
change is just to ship the feature exactly as it was under the experiment.
Most of the changes here are cleaning up the experiment opt-ins from our
test cases. The most important parts are in configs/experiments.go and in
experiments/experiment.go .
This is an initial draft of documentation for this new feature of the
CLI configuration. This is mainly intended as a placeholder for now,
because there are other documentation updates pending for the new provider
namespacing and installation scheme and we'll likely want to revise these
docs to better complement the broader documentation once it's written.
Implement a new provider_meta block in the terraform block of modules, allowing provider-keyed metadata to be communicated from HCL to provider binaries.
Bundled in this change for minimal protocol version bumping is the addition of markdown support for attribute descriptions and the ability to indicate when an attribute is deprecated, so this information can be shown in the schema dump.
Co-authored-by: Paul Tyng <paul@paultyng.net>
Previously the templatefile function would permit any arbitrary string as
a variable name, but due to the HCL template syntax it would be impossible
to refer to one that isn't a valid HCL identifier without causing an
HCL syntax error.
The HCL syntax errors are correct, but don't really point to the root
cause of the problem. Instead, we'll pre-verify that the variable names
are valid before we even try to render the template, and given a
specialized error message that refers to the vars argument expression as
the problematic part, which will hopefully make the resolution path
clearer for a user encountering this situation.
The syntax error still remains for situations where all of the variable
names are correct but e.g. the user made a typo referring to one, which
makes sense because in that case the problem _is_ inside the template.
* add setdifference and setsubtract functions and docs
* remove setdifference as it is not implemented correct in underlying lib
* Update setintersection.html.md
* Update setproduct.html.md
* Update setunion.html.md
This guide now lives at:
- https://learn.hashicorp.com/terraform#getting-started
...and terraform.io has been redirecting to there for quite a while. This commit
removes the extra copy so that the text of the two versions doesn't drift, and
updates existing links to point to the new location.
Nick Fagerlund