Create-before-destroy dependencies are automatically ordered correctly
by terraform. Remove the old notice about requiring all dependencies to
have the same setting for create_before_destroy.
In an earlier commit we added the "Best Practices" situation to try to
clarify the intended uses of named workspaces and to warn against using
them as an alternative to system decomposition.
However, the prior statement was cautious in its recommendations in the
interests of being pragmatic, and as a result we've seen that users have
in some cases misunderstood or disregarded these recommendations.
The new "When to use Multiple Workspaces" section aims to be more explicit
that having multiple separate Terraform configurations is the preferred
solution for many use-cases, and that workspaces are intended for a
more limited set of use-cases around convenient development and testing.
It also emphasizes the analogy to version control branches that was just
a footnote in the prior text, to help the reader become familiar with the
concept by relating it to a concept and workflow they are hopefully
already familiar with.
This new section also attempts to provide a more elaborate description of
the proposed alternative when the goal is system decomposition. In the
long run some of this content would probably be better placed elsewhere
since it is useful advice even for users who never discover named
workspaces, but it can live here for the time being to limit the scope of
this change until we are ready to make more comprehensive revisions to
the docs in this area.
Finally, the introductory documentation here is adjusted slightly in
preparation for the intended future expansion of workspaces to include
stored variable values and, for more tailored backends like Terraform
Enterprise, a full log of prior operations. More revisions will be
required to cover the specifics of this later, but this new framing will
hopefully help users form a mental model of named workspaces that has
room for these future enhancements and the corresponding concept in
Terraform Enterprise, rather than our previous framing that workspaces
are fundamentally just named states.
Also:
- In the getting started guide, the TFE content was all tailored to the older
run-locally workflow. I've replaced it with some brief explanation and a link
to the dedicated TFE getting started guide.
- Fixed a sidebar link glitch in the configuration section. (Both "Terraform"
and "Terraform Enterprise" were marked as active if you were on the TFE page.)
- Renamed the "Terraform Enterprise" page "Terraform Push." (Some people have
gotten confused and landed on this page when trying to set up the `atlas`
remote backend.)
provisioner. Also fixes an issue where channels and URLs are
not honored in the initial package install.
Signed-off-by: Rob Campbell <rcampbell@chef.io>
This new argument allows overriding of the working directory of the child process, with the default still being the working directory of Terraform itself.
This change allows the Habitat supervisor service name to be
configurable. Currently it is hard coded to `hab-supervisor`.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
Since an early version of Terraform, the `destroy` command has always
had the `-force` flag to allow an auto approval of the interactive
prompt. 0.11 introduced `-auto-approve` as default to `false` when using
the `apply` command.
The `-auto-approve` flag was introduced to reduce ambiguity of it's
function, but the `-force` flag was never updated for a destroy.
People often use wrappers when automating commands in Terraform, and the
inconsistency between `apply` and `destroy` means that additional logic
must be added to the wrappers to do similar functions. Both commands are
more or less able to run with similar syntax, and also heavily share
their code.
This commit updates the command in `destroy` to use the `-auto-approve` flag
making working with the Terraform CLI a more consistent experience.
We leave in `-force` in `destroy` for the time-being and flag it as
deprecated to ensure a safe switchover period.
When writing an example for a submodule, the example should be placed in
`examples/{example name}` instead of
`modules/{module name}/examples/{example name}`.
We have outgrown the single flat list presentation of providers due to the shear number now present, so we'll move here to a model where the providers are split into a number of categories that each contain a smaller list.
The full list is still included in the body of the main index page for quick access via search, but the categories make for a more accessible navbar for those who are just browsing.
Triton Manta allows an account other than the main triton account to be used via RBAC.
Here we expose the SDC_USER / TRITON_USER options to the backend so that a user can be specified.
Our prevailing writing style is to place punctuation outside of quotes, since in many contexts Terraform itself treats punctuation within quotes as significant and so it can be confusing to use punctuation in quotes in our prose.
* add catagory files
* try new source path
* cleaning up formatting
* fixin
* add all providers to providers index page
* add descriptions
* add link to form and first two providers
* small edits
* small edits
* small changes
* add community providers and decription edit from marketing
* add some lines to improve design
* fix typos
First successful run with private origin and HAB_AUTH_TOKEN set
Update struct, schema, and decodeConfig names to more sensible versions
Cleaned up formatting
Update habitat provisioner docs
Remove unused unitstring
Users commonly ask how the S3 backend can be used in an organization that
splits its infrastructure across many AWS accounts.
We've traditionally shied away from making specific recommendations here
because we can't possibly anticipate the different standards and
regulations that constrain each user. This new section attempts to
describe one possible approach that works well with Terraform's workflow,
with the goal that users make adjustments to it taking into account their
unique needs.
Since we are intentionally not being prescriptive here -- instead
considering this just one of many approaches -- it deviates from our usual
active writing style in several places to avoid giving the impression that
these are instructions to be followed exactly, which in some cases
requires the use of passive voice even though that is contrary to our
documentation style guide. For similar reasons, this section is also
light on specific code examples, since we do not wish to encourage users
to just copy-paste the examples without thinking through the consequences.
* Verify discovery works without trailing slash on discovery URL
* Update registry API docs with browse and search endpoints
* Add sample request/responses
* Add comment to test to indicate expecations
* Fix typo
* Remove trailing slash weirdness
It's important to match the version of local Terraform with the remote Terraform version in Terraform Enterprise when using the "terraform push" command, or else the uploaded configuration package may not be compatible.
This is a genre of invalid output expression that we've seen quite
commonly while testing with 0.11.0-rc1, so we'll call it out specifically
in the upgrade guide and suggest how to fix it.
The differences between the implicit and explicit modes of passing
provider configurations between modules are significant enough to warrant
giving these approaches different names and describing them separately.
This also includes documentation of the current limitation discussed in
#16612, where explicit passing requires a proxy configuration block even
for a _default_ provider configuration, because that limitation is being
accepted for the 0.11.0 release to limit scope.
We are recommending that as of 0.11 all provider configurations be placed
in the root module and, where necessary, be explicitly passed down via
a providers map to customize which configurations are seen by each
child module.
This new section attempts to guide users through such refactoring in the
common case where a child module defines its own provider configuration
based on a value passed in an input variable, and then uses that as
some context to link to the more detailed docs to help those who have
more complex configurations.
The initial pass of this section had some remaining ambiguities, so this
is a second revision that attempts to use terminology more consistently
and to not some additional behaviors that were not described in the
initial version.
We've historically been somewhat inconsistent in how we refer to the
type of object defined by "variable" blocks in configuration. Parts of
our documentation refer to them as "input variables" or just "variables",
while our implementation refers to them as "user variables".
Since Terraform Registry is now also referring to these as "Inputs", here
we standardize on "Input Variable" as the fully-qualified name for this
concept, with "variable" being a shorthand for this where context is
obvious. Outside of this context, anything that can be referred to in
an interpolation expression is generically known as a "variable", with
Input Variables being just one kind, specified by the "var." prefix.
While this terminology shift is not critical yet, it will become more
important as we start to document the new version of the configuration
language so we can use the generic meaning of "variable" there.
The bulk of the text on this page hasn't been revised for some time and
so parts of it were using non-idiomatic terminology or not defining terms
at all.
The main goal of this revision is to standardize on the following terms:
- "provider configuration" refers to a specific provider block in config,
as a distinct idea from the provider _itself_, which is a singleton.
- "Default" vs. "additional" provider configurations, distinguishing
those without and with "alias" arguments respectively. These are named
here so that we can use this terminology to describe the different
behaviors of each for the purposes of provider inheritance between
modules.
The "terraform" provider was previously split out into its own repository,
but that turned out to be a mistake due to how tightly it depends on
aspects of Terraform Core.
Here we prepare to bring it back into the core repository by reorganizing
the directory layout to conform with what's expected there.
This allows the user to customize the location where Terraform stores
the files normally placed in the ".terraform" subdirectory, if e.g. the
current working directory is not writable.
This is a significant rework of the Modules getting started guide to be
in terms of the Consul module available via the Terraform Registry. This
allows us to introduce the registry as part of the tutorial, and also
gives us some auto-generated documentation to link to as context for
the tutorial.
This new module is designed pretty differently than the one we formerly
used, and in particular it doesn't expose any server addresses for the
created Consul cluster -- due to using an auto-scaling group -- and thus
we're forced to use the (arguably-less-compelling) auto-scaling group name
for our output example.
Now includes more complete information on usage of private registries and
updates the module registry API documentation to include the new
version-enumeration endpoint along with describing Terraform's discovery
protocol.
The modules mechanism has changed quite a bit for version 0.11 and so
although simple usage remains broadly compatible there are some
significant changes in the behavior of more complex modules.
Since large parts of this were rewritten anyway, I also took the
opportunity to do some copy-editing to make the prose on this page more
consistent with our usual editorial voice and to wrap the long
lines.
In the 0.10 release we added an opt-in mode where Terraform would prompt
interactively for confirmation during apply. We made this opt-in to give
those who wrap Terraform in automation some time to update their scripts
to explicitly opt out of this behavior where appropriate.
Here we switch the default so that a "terraform apply" with no arguments
will -- if it computes a non-empty diff -- display the diff and wait for
the user to type "yes" in similar vein to the "terraform destroy" command.
This makes the commonly-used "terraform apply" a safe workflow for
interactive use, so "terraform plan" is now mainly for use in automation
where a separate planning step is used. The apply command remains
non-interactive when given an explicit plan file.
The previous behavior -- though not recommended -- can be obtained by
explicitly setting the -auto-approve option on the apply command line,
and indeed that is how all of the tests are updated here so that they can
continue to run non-interactively.
This PR changes manta from being a legacy remote state client to a new backend type. This also includes creating a simple lock within manta
This PR also unifies the way the triton client is configured (the schema) and also uses the same env vars to set the backend up
It is important to note that if the remote state path does not exist, then the backend will create that path. This means the user doesn't need to fall into a chicken and egg situation of creating the directory in advance before interacting with it
This resurrects the previously documented but unused "project" option.
This option is required to create buckets (so they are associated with the
right cloud project) but not to access the buckets later on (because their
names are globally unique).
* Remove the (unused) "project" option.
* Mark the "credentials" option as optional; document behavior when
unset.
* Mark the "path" option as deprecated (was: legacy) to match
Terraform's terminology.
Since we don't currently auto-install provisioner plugins this is
currently placed on the providers documentation page and referred to as
the "Provider Plugin Cache". In future this mechanism may also apply to
provisioners, in which case we'll figure out at that point where better
to place this information so it can be referenced from both the provider
and provisioner documentation pages.
This mechanism for configuring plugins is now deprecated, since it's not
capable of declaring plugin versions. Instead, we recommend just placing
plugins into a particular directory, which is now documented on the
main providers documentation page and linked from the more detailed docs
on plugins in general.
Previously we described inline here where to put the .terraformrc file,
but now we have a separate page all about this file that gives us more
room to describe in more detail where the file is placed and what else it
can do.
This function takes a map of lists of strings and inverts it so that
the string values become keys and the keys become items within the
corresponding lists.
Ben Turner