The template resources don't actually need to retain any state, so they
are good candidates to be data sources.
This includes a few tweaks to the acceptance tests -- now configured to
run as unit tests -- since it seems that they have been slightly broken
for a while now. In particular, the "update" cases are no longer tested
because updating is not a meaningful operation for a data source.
When adding multiple notifications from one S3 bucket to one SQS queue, it wasn't immediately intuitive how to do this.
At first I created two `aws_s3_bucket_notification` configs and it seemed to work fine, however the config for one event
will overwrite the other. In order to have multiple events, you can defined the `queue` key twice, or use an array if you're
working with the JSON syntax. I tried to make this more clear in the documentation.
This fixes#7157. It doesn't change the way aws_ami works
```
make testacc TEST=./builtin/providers/aws
TESTARGS='-run=TestAccAWSAMICopy'
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v -run=TestAccAWSAMICopy
-timeout 120m
=== RUN TestAccAWSAMICopy
--- PASS: TestAccAWSAMICopy (479.75s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 479.769s
```
allows load balancer policies and their assignment to backend servers or listeners to be configured independently.
this gives flexibility to configure additional policies on aws elastic load balancers aside from the already provided "convenience" wrappers for cookie stickiness
This resource (unlike the others in this provider) isn't stateful, so it
is a good candidate to be a data source.
The old resource form is preserved via the standard shim in helper/schema,
which will generate a deprecation warning but will still allow the
resource to be used.
When applying or removing 2+ security groups from an instance, an EOF
error will be triggered even though the action was successful. This
patch accounts for and ignores the EOF error. It also adds a test
case.
Security Group and Port documentation are also updated in this
commit.
* small doc update
* provider/atlas: Add docs for Artifact Data Source
* provider/atlas: Remove a test method that isn't used
* provider/atlas: Add Data Source for Atlas Artifact
* provider/atlas: Show deprecation error on atlas_artifact resource
* Added support for redshift destination to firehose delivery streams
* Small documentation fix
* go fmt after rebase
* small fixes after rebase
* provider/aws: Firehose test cleanups
* provider/aws: Update docs
* Convert Redshift and S3 blocks to TypeList
* provider/aws: Add migration for S3 Configuration in Kinesis firehose
* providers/aws: Safety first when building Redshift config options
* restore commented out log statements in the migration
* provider/aws: use MaxItems in schema
* added additional error info for when memory swap assert fails.
related to https://github.com/hashicorp/terraform/pull/7392
* updated docker_container documentation
reflect recent changes to docker provider around tests, dns options and
dns search support.
* Grammar and punctuation changes
Docker container documentation.
* Spell checking, grammar and punctuation.
Docker container documentation.
* Markdown change sto docker container documentation
* Add SES resource
* Detect ReceiptRule deletion outside of Terraform
* Handle order of rule actions
* Add position field to docs
* Fix hashes, add log messages, and other small cleanup
* Fix rebase issue
* Fix formatting
In CloudStack you can dynamically start using an ACL and once you use
an ACL you can dynamically swap ACL’s. But once your using an ACL, you
can no longer stop using an ACL without rebuilding the network.
This change makes the `ForceNew` value dynamic so that it only returns
`true` if you are reverting from using an ACL to not using an ACL
anymore, making this functionally inline with the behaviour CloudStack
offers.
this datasource allows terraform to work with externally modified state, e.g.
when you're using an ECS service which is continously updated by your CI via the
AWS CLI.
right now you'd have to wrap terraform into a shell script which looks up the
current image digest, so running terraform won't change the updated service.
using the aws_ecs_container_definition data source you can now leverage
terraform, removing the wrapper entirely.
Since this resource produces a list it feels more intuitive to give its
attribute a plural name, and since the noun "instance" already means
something specific in the AWS provider that doesn't apply here we use
"names" to indicate that these are availability zone names.
Also includes updating the docs to not show a dynamic count example for
now, since we don't support that yet.
false
Fixes#7035
A known issue in Terraform means that d.GetOk() on a bool which is false
will mean it doesn't get evaulated. Therefore, when people set
publicly_accessible to false, it will never get evaluated on the Create
We are going to make it default to false now
The documentation wording implies that in all cases you have to manually accept peering requests. This change is intended to clarify where this is required. The documentation also separates between "basic usage" and "basic usage with tags", but the expanded usage didn't actually provide much additional useful information. Expanded a bit to show the use of auto_accept since both VPCs are created by the content and to show setting the Name tag for proper display in the console.
resize
When resizing a DO droplet, you can only increase the size not
descrease. If you try and go down in size, the API will return this
error:
```
* digitalocean_droplet.foobar: Error resizing droplet (17090364):
POST https://api.digitalocean.com/v2/droplets/17090364/actions:
422 Size can not decrease size of Droplet's disk image
```
Since the custom_configuration_parameters can't take dots, we cannot
set 'disk.EnableUUID'. This adds a parameter for this options that gets
added to a configSpec. This option causes the vm to mount disks by uuid
on the guest OS.
* Adding debug functionality to log debug api calls
* adding debug and refactoring tests
* more tweaks with tests
* updating documentation
* more refactoring of tests
* working through factor for testing
* removing logging that displays username and password
* more work on getting tests stable
The example is referencing a non-existent variable, `allocation_id`, within the `aws_eip` resource. I believe this should actually be `aws_eip.example.id` instead of `aws_eip.example.allocation_id`.
Add the iam_arn attribute to aws_cloudfront_origin_access_identity,
which computes the IAM ARN for a certain CloudFront origin access
identity.
This is necessary because S3 modifies the bucket policy if CanonicalUser
is sent, causing spurious diffs with aws_s3_bucket resources.
This brings over the work done by @apparentlymart and @radeksimko in
PR #3124, and converts it into a data source for the AWS provider:
This commit adds a helper to construct IAM policy documents using
familiar Terraform concepts. It makes Terraform-style interpolations
easier and resolves the syntax conflict between Terraform interpolations
and IAM policy variables by changing the latter to use &{...} for its
interpolations.
Its use is completely optional and users are free to go on using literal
heredocs, file interpolations or whatever else; this just adds another
option that fits more naturally into a Terraform config.
...as this will hopefully clue people in that this function will indeed
work to manipulate ipv6 networks.
Not that I completely spaced on that for quite some time, or anything
like that.
Nope, not me. Not at all.
This data source allows one to look up the most recent AMI for a specific
set of parameters, much like aws ec2 describe-images in the AWS CLI.
Basically a refresh of hashicorp/terraform#4396, in data source form.
* Add per user, role and group policy attachment
* Add docs for new IAM policy attachment resources.
* Make policy attachment resources manage only 1 entity<->policy attachment
* provider/aws: Tidy up IAM Group/User/Role attachments
This commit adds a data source with a single list, `instance` for the
schema which gets populated with the availability zones to which an
account has access.
Allow a cloud admin to target a specific tenant in which to allocate
a floating IP. This is useful when the cloud admin does not want to
delegate network privileges to the tenants or various Q&A scenarios.
resource
We had a line on the Update func that said:
```
Hash key can only be specified at creation, you cannot modify it.
```
The resource has now been changed to ForceNew on the hashkey
```
aws_dynamodb_table.demo-user-table: Refreshing state... (ID: Users)
aws_dynamodb_table.demo-user-table: Destroying...
aws_dynamodb_table.demo-user-table: Destruction complete
aws_dynamodb_table.demo-user-table: Creating...
aws_dynamodb_table.demo-user-table: Creation complete
```
Changed schema type for disks to support dynamic non-ordered disk
swapping. All Disk attributes have been made non ForceNew since
any changes should be handled in the upgrade() function.
Added 'name' attribute to disks to act as a unique
identifier for when users request for new disks. It is also used as
the filename for the new disk. Templates are considered immutable.
The openstack_networking_subnet_v2 resource was originally designed
to have DHCP disabled by default; however, a bug in the original
implementation caused DHCP to always be enabled and never be
disabled. This bug was fixed in #6052.
Recent discussions have shown that users prefer if DHCP is enabled
by default. This commit implements makes the change.
When stage_name is not passed to the resource
aws_api_gateway_deployment a terraform apply will fail. This is
because the stage_name is required and not optional.
* Grafana provider
* grafana_data_source resource.
Allows data sources to be created in Grafana. Supports all data source
types that are accepted in the current version of Grafana, and will
support any future ones that fit into the existing structure.
* Vendoring of apparentlymart/go-grafana-api
This is in anticipation of adding a Grafana provider plugin.
* grafana_dashboard resource
* Website documentation for the Grafana provider.
* provider/datadog Update go-datadog-api.
* provider/datadog Add support for "require_full_window" and "locked".
* provider/datadog Update tests, update doco, gofmt.
* provider/datadog Add options to update resource.
* provider/datadog "require_full_window" defaults to True, "locked" to False. Use
those initial values as the starting configuration.
* provider/datadog Update notify_audit tests to use the default value for
testAccCheckDatadogMonitorConfig and a custom value for
testAccCheckDatadogMonitorConfigUpdated.
This catches a situation where the code ignores setting the option on creation,
and the update function merely asserts the default value, versus actually changing
the value.
`azurerm_storage_account` access keys
Please note that we do NOT have the ability to manage the access keys -
we are just getting the keys that the account creates for us. To manage
the keys, you would need to use the azure portal still
As a first example of a real-world data source, the pre-existing
terraform_remote_state resource is adapted to be a data source. The
original resource is shimmed to wrap the data source for backward
compatibility.
As requested in #4822, add support for a KMS Key ID (ARN) for Db
Instance
```
make testacc TEST=./builtin/providers/aws
TESTARGS='-run=TestAccAWSDBInstance_kmsKey' 2>~/tf.log
==> Checking that code complies with gofmt requirements...
go generate $(go list ./... | grep -v /vendor/)
TF_ACC=1 go test ./builtin/providers/aws -v
-run=TestAccAWSDBInstance_kmsKey -timeout 120m
=== RUN TestAccAWSDBInstance_basic
--- PASS: TestAccAWSDBInstance_basic (587.37s)
=== RUN TestAccAWSDBInstance_kmsKey
--- PASS: TestAccAWSDBInstance_kmsKey (625.31s)
PASS
ok github.com/hashicorp/terraform/builtin/providers/aws 1212.684s
```
Auto-generating an Instance Template name (or just its suffix) allows the
create_before_destroy lifecycle option to function correctly on the
Instance Template resource. This in turn allows Instance Group Managers
to be updated without being destroyed.
This introduces the terraform state list command to list the resources
within a state. This is the first of many state management commands to
come into 0.7.
This is the first command of many to come that is considered a
"plumbing" command within Terraform (see "plumbing vs porcelain":
http://git.661346.n2.nabble.com/what-are-plumbing-and-porcelain-td2190639.html).
As such, this PR also introduces a bunch of groundwork to support
plumbing commands.
The main changes:
- Main command output is changed to split "common" and "uncommon"
commands.
- mitchellh/cli is updated to support nested subcommands, since
terraform state list is a nested subcommand.
- terraform.StateFilter is introduced as a way in core to filter/search
the state files. This is very basic currently but I expect to make it
more advanced as time goes on.
- terraform state list command is introduced to list resources in a
state. This can take a series of arguments to filter this down.
Known issues, or things that aren't done in this PR on purpose:
- Unit tests for terraform state list are on the way. Unit tests for the
core changes are all there.
This changes the representation of maps in the interpolator from the
dotted flatmap form of a string variable named "var.variablename.key"
per map element to use native HIL maps instead.
This involves porting some of the interpolation functions in order to
keep the tests green, and adding support for map outputs.
There is one backwards incompatibility: as a result of an implementation
detail of maps, one could access an indexed map variable using the
syntax "${var.variablename.key}".
This is no longer possible - instead HIL native syntax -
"${var.variablename["key"]}" must be used. This was previously
documented, (though not heavily used) so it must be noted as a backward
compatibility issue for Terraform 0.7.
This introduces the terraform state list command to list the resources
within a state. This is the first of many state management commands to
come into 0.7.
This is the first command of many to come that is considered a
"plumbing" command within Terraform (see "plumbing vs porcelain":
http://git.661346.n2.nabble.com/what-are-plumbing-and-porcelain-td2190639.html).
As such, this PR also introduces a bunch of groundwork to support
plumbing commands.
The main changes:
- Main command output is changed to split "common" and "uncommon"
commands.
- mitchellh/cli is updated to support nested subcommands, since
terraform state list is a nested subcommand.
- terraform.StateFilter is introduced as a way in core to filter/search
the state files. This is very basic currently but I expect to make it
more advanced as time goes on.
- terraform state list command is introduced to list resources in a
state. This can take a series of arguments to filter this down.
Known issues, or things that aren't done in this PR on purpose:
- Unit tests for terraform state list are on the way. Unit tests for the
core changes are all there.
* core: Add support for marking outputs as sensitive
This commit allows an output to be marked "sensitive", in which case the
value is redacted in the post-refresh and post-apply list of outputs.
For example, the configuration:
```
variable "input" {
default = "Hello world"
}
output "notsensitive" {
value = "${var.input}"
}
output "sensitive" {
sensitive = true
value = "${var.input}"
}
```
Would result in the output:
```
terraform apply
Apply complete! Resources: 0 added, 0 changed, 0 destroyed.
Outputs:
notsensitive = Hello world
sensitive = <sensitive>
```
The `terraform output` command continues to display the value as before.
Limitations: Note that sensitivity is not tracked internally, so if the
output is interpolated in another module into a resource, the value will
be displayed. The value is still present in the state.
* provider/fastly: Add support for Conditions for Fastly Services
Docs here:
- https://docs.fastly.com/guides/conditions/
Also Bump go-fastly version for domain support in S3 Logging
* New top level AWS resource aws_eip_association
* Add documentation for aws_eip_association
* Add tests for aws_eip_association
* provider/aws: Change `aws_elastic_ip_association` to have computed
parameters
The AWS API was send ing more parameters than we had set. Therefore,
Terraform was showing constant changes when plans were being formed
* Adding private ip address reference
* adding private ip address reference
* Updating the docs.
* Removing optional attrib from private_ip_address
Removing optional attribute from private_ip_address, this element is only being used in the read.
* Selecting the first element instead of using a loop for now.
Change this to a loop when https://github.com/Azure/azure-sdk-for-go/issues/259 is fixed
Added the hosted_zone_id attribute, which aliases to the Route 53
zone ID that can be used to route Alias Resource Record Sets to.
This fixeshashicorp/terraform#6489.
adminPassword
Reports from issues showed the following errors:
```
{
"error": {
"code": "InvalidParameter",
"target": "adminPassword",
"message": "The supplied password must be
between 6-72 characters long and must
satisfy at least 3 of password complexity
requirements from the following: \r\n1)
Contains an uppercase character\r\n2)
Contains a lowercase character\r\n3)
Contains a numeric digit\r\n4) Contains a
special character."
}
}
```
This commit adds some documentation for the adminPassword complexity
requirements
ssh_keys were throwing an error similar to this:
```
* azurerm_virtual_machine.test: [DEBUG] Error setting Virtual Machine
* Storage OS Profile Linux Configuration: &errors.errorString{s:"Invalid
* address to set: []string{\"os_profile_linux_config\", \"0\",
* \"ssh_keys\"}"}
```
This was because of nesting of Set within a Set in the schema. By
changing this to a List within a Set, the schema works as expected. This
means we can now set SSH Keys on VMs. This has been tested using a
remote-exec and a connection block with the ssh key
```
azurerm_virtual_machine.test: Still creating... (2m10s elapsed)
azurerm_virtual_machine.test (remote-exec): Connected!
azurerm_virtual_machine.test (remote-exec): CONNECTED!
```
Change the AWS DB Instance to now include the DB Option Group param. Adds a test to prove that it works
Add acceptance tests for the AWS DB Option Group work. This ensures that Options can be added and updated
Documentation for the AWS DB Option resource
automated_snapshot_retention_period
The default value for `automated_snapshot_retention_period` is 1.
Therefore, it can be included in the `CreateClusterInput` without
needing to check that it is set.
This was actually stopping people from setting the value to 0 (disabling
the snapshots) as there is an issue in `d.GetOk()` evaluating 0 for int
Just wanted to call out that the CLI prompts for values for unset variables instead of an error. Guessing that was an enhancement somewhere along the line and just didn't get updated in the docs.
Here is an example that will setup the following:
+ An SSH key resource.
+ A virtual server resource that uses an existing SSH key.
+ A virtual server resource using an existing SSH key and a Terraform managed SSH key (created as "test_key_1" in the example below).
(create this as sl.tf and run terraform commands from this directory):
```hcl
provider "softlayer" {
username = ""
api_key = ""
}
resource "softlayer_ssh_key" "test_key_1" {
name = "test_key_1"
public_key = "${file(\"~/.ssh/id_rsa_test_key_1.pub\")}"
# Windows Example:
# public_key = "${file(\"C:\ssh\keys\path\id_rsa_test_key_1.pub\")}"
}
resource "softlayer_virtual_guest" "my_server_1" {
name = "my_server_1"
domain = "example.com"
ssh_keys = ["123456"]
image = "DEBIAN_7_64"
region = "ams01"
public_network_speed = 10
cpu = 1
ram = 1024
}
resource "softlayer_virtual_guest" "my_server_2" {
name = "my_server_2"
domain = "example.com"
ssh_keys = ["123456", "${softlayer_ssh_key.test_key_1.id}"]
image = "CENTOS_6_64"
region = "ams01"
public_network_speed = 10
cpu = 1
ram = 1024
}
```
You'll need to provide your SoftLayer username and API key,
so that Terraform can connect. If you don't want to put
credentials in your configuration file, you can leave them
out:
```
provider "softlayer" {}
```
...and instead set these environment variables:
- **SOFTLAYER_USERNAME**: Your SoftLayer username
- **SOFTLAYER_API_KEY**: Your API key
IPv6 support added.
We support 1 IPv6 address per interface. It seems like the vSphere SDK supports more than one, since it's provided as a list.
I can change it to support more than one address. I decided to stick with one for now since that's how the configuration parameters
had been set up by other developers.
The global gateway configuration option has been removed. Instead the user should specify a gateway on NIC level (ipv4_gateway and ipv6_gateway).
For now, the global gateway will be used as a fallback for every NICs ipv4_gateway.
The global gateway configuration option has been marked as deprecated.
this implements two new resource types:
* openstack_networking_secgroup_v2 - create a neutron security group
* openstack_networking_secgroup_rule_v2 - create a newutron security
group rule
Unlike their nova counterparts the neutron security groups allow a user
to specify the target tenant_id allowing a cloud admin to create per
tenant resources.
* Adding File Resource for vSphere provider
Allows for file upload to vSphere at specified location. This also
includes update for moving or renaming of file resources.
* Ensuring required parameters are provided
This commit adds several example uses of the
openstack_compute_instance_v2 resource. It also makes a clarification
about booting from volumes and image ids/names.
* command/fmt: Document -diff doesn't disable -write
As noted in hashicorp/terraform#6343, this description misleadingly
suggested that the `-diff` option disables the `-write` option.
This isn't the case and because of the default options (described in
c753390) the behaviour of `terraform fmt -diff` is actually the same as
`terraform fmt -write -list -diff`.
Replace the "instead of rewriting" description to clarify that.
Documentation in hcl/fmtcmd is corrected in hashicorp/hcl#117 but it's not
really necessary to bump the dependency version.
* command/fmt: Show flag defaults in help text
These were documented on the website but not in the `-help` text. This
should help to clarify that you need to pass `-list=false -write=false
-diff` if you only want to see diffs.
Accordingly I've replaced the word "disabled" with "always false" in the
STDIN special cases so that it matches the terminology used in the defaults
and better indicates that it is overridden.
NB: The 3x duplicated defaults and documentation makes me feel uneasy once
again. I'm not sure how to solve that, though.
* Fix headers and header anchor tags
The markdown parser already generates unique ids for header elements by
downcasing all of the words and replacing spaces with hyphens. Knowing
this, we can take the code blocks out of the headers and use the
generated ids as the link targets.
Aside: I tried to see if there was a standard way of documenting
subresources, but couldn't really find one. Both the aws_elb and
aws_instance resources seem to just say "documented below" without a
link. Then the relevant section is just a new paragraph with a list of
arguments.
* Reformat long lines
I find 80 character lines and whitespaces make the lists much easier to
read :)
* Remove extraneous <a> tags for header anchor tags
Now that middleman generates anchor tags for headers automagically, we
don't need to have blank <a> tags for anchor links to use.
* provider/fastly: Add S3 Log Streaming to Fastly Service
Adds streaming logs to an S3 bucket to Fastly Service V1
* provider/fastly: Bump go-fastly version for domain support in S3 Logging
This change adds the support for the proxied configuration option for a
record which enables origin protection for CloudFlare records.
In order to do so the golang library needed to be changed as the old did
not support the option and was using and outdated API version.
Open issues which ask for this (#5049, #3805).
User may specify a vmdk in their disk definition.
The options size, template, and vmdk are considered
to be mutually exclusive. User may also set whether each disk
associated with the vm should try to boot after creation.
Todo: Enforce mutual exclusivity, validate the bootable_vmdk_path
Just saying `id` is ambiguous, it could be interpreted as the resource ID which will fail with the follow error: `CertificateNotFound: Server Certificate not found for the key: <id>`. The AWS documentation states that the ssl certificate id parameter must be the ARN.
Previously we linked to the whole request body definition for valid values of `runtime`.
Now we link directly to the docs for `Runtime`, which will hopefully make it easier to find the valid values.
This fixes#4570.
Official OpenStack clients commonly support specifing a client
certificate/key to enable SSL client authentication when communicating
with OpenStack services. This patch enables such feature in Terraform
with new parameters and environment variables:
* 'cert' provider parameter or OS_CERT env variable to specify client
certificate file,
* 'key' provider parameter or OS_KEY env variable to specify client
certificate private key file.
It can come in handy to be able to mount ISOs programmatically.
For instance if you're developing a custom appliance (that automatically installs itself on the hard drive volume)
that you want to automatically test on every successful build (given the ISO is uploaded to the vmware datastore).
There are probably lots of other reasons for using this functionality.
* provider/aws: Fix hashing on CloudFront certificate parameters
Adding necessary type assertion to values on the viewer_certificate hash
function to ensure that certain fields are indeed not zero string
values, versus simply zero interface{} values (aka nil, as is such for a
map[string]interface{}).
* provider/aws: CloudFront complex structure error handling
Handle errors better on calls to d.Set() in the
aws_cloudfront_distribution, namely in flattenDistributionConfig(). Also
caught a bug in the setting of the origin attribute, was incorrectly
attempting to set origins.
* provider/aws: Pass pointers to set CloudFront primitives
Change a few d.Set() for primitives in aws_cloudfront_distribution and
aws_cloudfront_origin_access_identity to use the pointer versus a
dereference.
* docs: Fix CloudFront examples formatting
Ran each example thru terraform fmt to fix indentation.
* provider/aws: Remove delete retention on CloudFront tests
To play better with Travis and not bloat the test account with disabled
distributions.
Disable-only functionality has been retained - one can enable it with
the TF_TEST_CLOUDFRONT_RETAIN environment variable.
* provider/aws: CloudFront delete waiter error handling
The call to resourceAwsCloudFrontDistributionWaitUntilDeployed() on
deletion of CloudFront distributions was not trapping error messages,
causing issues with waiter failure.
* provider/fastly: Add support for managing Headers
Adds support for managing Headers in a Fastly configuration.
* update acc test
* update website with example of adding a header block
* provider/aws: Default Network ACL resource
Provides a resource to manage the default AWS Network ACL. VPC Only.
* Remove subnet_id update, mark as computed value. Remove extra tag update
* refactor default rule number to be a constant
* refactor revokeRulesForType to be revokeAllNetworkACLEntries
Refactor method to delete all network ACL entries, regardless of type. The
previous implementation was under the assumption that we may only eliminate some
rule types and possibly not others, so the split was necessary.
We're now removing them all, so the logic isn't necessary
Several doc and test cleanups are here as well
* smite subnet_id, improve docs
According to the libpq documentation, "prefer" is the default in the
underlying library and so setting a different default in the Terraform
layer would be a breaking change for existing users of this provider
whose servers do not have TLS correctly configured.
The docs now link to the libpq manual's discussion of the security
implications of each of the ssl_mode options, so the user can understand
the limitations of the "prefer" default and can make an informed decision
about which setting is appropriate for their situation.
This introduces a provider for Cobbler. Cobbler manages bare-metal
deployments and, to some extent, virtual machines. This initial
commit supports the following resources: distros, profiles, systems,
kickstart files, and snippets.
* CloudFront implementation v3
* Update tests
* Refactor - new resource: aws_cloudfront_distribution
* Includes a complete re-write of the old aws_cloudfront_web_distribution
resource to bring it to feature parity with API and CloudFormation.
* Also includes the aws_cloudfront_origin_access_identity resource to generate
origin access identities for use with S3.
* provider/aws: CodeDeploy Deployment Group Triggers
- Create a Trigger to Send Notifications for AWS CodeDeploy Events
- Update aws_codedeploy_deployment_group docs
* Refactor validateTriggerEvent function and test
- also rename TestAccAWSCodeDeployDeploymentGroup_triggerConfiguration test
* Enhance existing Deployment Group integration tests
- by using built in resource attribute helpers
- these can get quite verbose and repetitive, so passing the resource to a function might be better
- can't use these (yet) to assert trigger configuration state
* Unit tests for conversions between aws TriggerConfig and terraform resource schema
- buildTriggerConfigs
- triggerConfigsToMap
We have a curtesy function in place allowing you to specify both a
`name` of `ID`. But in order for the graph to be build correctly when
you recreate or taint stuff that other resources depend on, we need to
reference the `ID` and *not* the `name`.
So in order to enforce this and by that help people to not make this
mistake unknowingly, I deprecated all the parameters this allies to and
changed the logic, docs and tests accordingly.
Added the ability to set the "privacy" of a github_team resource so all teams won't automatically set to private.
* Added the privacy argument to github_team
* Refactored parameter validation to be general for any argument
* Updated testing
This commit enables the ability to authenticate to OpenStack by way
of a Keystone Token. Tokens can provide a way to use Terraform and
OpenStack with an expiring, temporary credential. The token will need
to be generated out of band from Terraform.
On creating CloudWatch metric alarms, I need to get the HealthCheckId dimension. Reference would be useful.
```
dimensions {
"HealthCheckId" = "${aws_route53_health_check.foo.id}"
}
```
This commit adds a no_gateway attribute. When set, the subnet will
not have a gateway. This is different than not specifying a
gateway_ip since that will cause a default gateway of .1 to be used.
This behavior mirrors the OpenStack Neutron command-line tool.
Fixes#6031
When calling AssociateAddress, the PrivateIpAddress parameter must be
used to select which private IP the EIP should associate with, otherwise
the EIP always associates with the _first_ private IP.
Without this parameter, multiple EIPs couldn't be assigned to a single
ENI. Includes covering test and docs update.
Fixes#2997
GitHub really doesn't like when you make the H lowercase, it violates
their brand guidelines and they won't help promote anything that doesn't
use the capital H.
* update docs on required parameter for api_gateway_integration
This parameter was required for lambda integration.
Otherwise,
` Error creating API Gateway Integration: BadRequestException: Enumeration value for HttpMethod must be non-empty`
* documentation: Including the AWS type on the api_gateway_integration docs
Documentation for `aws_cloudwatch_event_target` to warn that in order to be
able to have your AWS Lambda function or SNS topic invoked by a CloudWatch
Events rule, you must setup the right permissions
using `aws_lambda_permission` or `aws_sns_topic.policy`
It turns out all other providers use `ip_address` where the CloudStack
provider uses `ipaddress`. To make this more consistent this PR
deprecates `ipaddress` and adds `ip_address` where needed…
This new resource is an alternative to consul_keys that manages all keys
under a given prefix, rather than arbitrary single keys across the entire
store.
The key advantage of this resource over consul_keys is that it is able to
detect and delete keys that are added outside of Terraform, whereas
consul_keys is only able to detect changes to keys it is explicitly
managing.
Radek Simko