Previously, if a diagnostic context spanned multiple lines, any lines
which did not overlap with the highlight range would be displayed as
blank. This commit fixes the bug.
The problem was caused by the unconditional use of `PartitionAround` to
split the line into before/highlighted/after ranges. When two ranges
don't overlap, this method returns empty ranges, which results in a
blank line. Instead, we first check if the ranges do overlap, and if not
we print the entire line from the context.
Previously, diagnostic errors would display the filename and line
number, along with "(source code not available)". This is because the
fmt command directly loads and parses the configuration, instead of
using the config loader.
This commit registers the manually parsed source as a synthetic
configuration file, so that the diagnostic formatter can look up the
source for the range with the error and display it.
These new functions allow command implementations to get hold of the
providercache objects and installation source object derived from the
current CLI configuration.
missingPlugins was hard-coded to work only with provider plugins, so I
renamed it to clarify the usage.
Also renamed a test provider from greater_than to greater-than as the
underscore is an invalid provider name character and this will become a
hard error in the near future.
* import: remove Config from ImportOpts
`Config` in ImportOpts was any provider configuration provided by the
user on the command line. This option has already been removed in favor
of only taking the provider from the configuration loaded in the current
context.
* terrafrom: add Config to ImportStateTransformer and refactor Transform
to get the resource provider FQN from the Config
Implement a new provider_meta block in the terraform block of modules, allowing provider-keyed metadata to be communicated from HCL to provider binaries.
Bundled in this change for minimal protocol version bumping is the addition of markdown support for attribute descriptions and the ability to indicate when an attribute is deprecated, so this information can be shown in the schema dump.
Co-authored-by: Paul Tyng <paul@paultyng.net>
* command/jsonstate: fix inconsistency with resource address
Resource addresses in state output were not including index for
instances created with for_each or count, while the index was appearing
in the plan output. This PR fixes that inconsistency, adds tests, and
updates the existing tests.
Fixes#24110
* add tests showing expected prior state resource addressing
* added example of show json state output with modules
Our initial Terraform 0.13.0 release will continue to support only the
hard-coded official HashiCorp signing key, with support for other keys to
follow in a later release once the trust infrastructure is in place to
support that.
This change is intended to (marginally) improve the UX for a possible
future situation where a HashiCorp-distributed provider makes a released
signed with a new key and a prior version of Terraform ends up trying to
install it due to incorrect version constraints. With this new text we
hope to give the user a better prompt for onward troubleshooting, but
in a sort of hedging way because we have not yet finalized the details of
how new keys might roll out in practice.
Hopefully a user seeing this message would consult the release notes for
Terraform itself and for the provider in question and find some
as-yet-undetermined information about how to proceed.
If the decentralized trust model design comes together before the v0.13.0
release then we may make further amendments here to prepare for that, but
that work should not block the v0.13.0 release if other work concludes
first.
* WIP: dynamic expand
* WIP: add variable and local support
* WIP: outputs
* WIP: Add referencer
* String representation, fixing tests it impacts
* Fixes TestContext2Apply_outputOrphanModule
* Fix TestContext2Apply_plannedDestroyInterpolatedCount
* Update DestroyOutputTransformer and associated types to reflect PlannableOutputs
* Remove comment about locals
* Remove module count enablement
* Removes allowing count for modules, and reverts the test,
while adding a Skip()'d test that works when you re-enable
the config
* update TargetDownstream signature to match master
* remove unnecessary method
Co-authored-by: James Bardin <j.bardin@gmail.com>
If an error occurs on creating the context for console or import, we
would fail to unlock the state. Fix this by unlocking slightly earlier.
Affects console and import commands.
Fixes#23318
* fix outdated syntax in comments
* test for non-strings in ParseAbsProviderConfig
* ProviderConfigDefault and ProviderConfigAliased now take Providers
instead of strings
a large refactor to addrs.AbsProviderConfig, embedding the addrs.Provider instead of a Type string. I've added and updated tests, added some Legacy functions to support older state formats and shims, and added a normalization step when reading v4 (current) state files (not the added tests under states/statefile/roundtrip which work with both current and legacy-style AbsProviderConfig strings).
The remaining 'fixme' and 'todo' comments are mostly going to be addressed in a subsequent PR and involve looking up a given local provider config's FQN. This is fine for now as we are only working with default assumption.
With the current implementation of terraform login, Windows Subsystem
for Linux fails to open a browser due to lack of support for xdg-open.
This commit reuses a fix from pkg/browser#8 which detects a WSL
environment and uses cmd.exe to open the URL instead.
Now that #22862 has been merged, terraform will properly pick up the
resource provider configuration from state. We can remove the deprecated
`-provider` flag.
There was an order-of-operations bug where the import graph builder was
validating that the provider did not have any resource references before
references were actually being attached. This PR fixes the order of
operations and adds a test (in the command package).
Fixes#22804
When a token is pasted by the user, we make a request to the
TFE API /account/details endpoint to verify its validity. If successful,
we display the logged-in username as confirmation. If not, we refuse to
store the invalid token and display an error message.
This commit also trims whitespace from around the pasted value, to
reduce the likelihood of a copy & paste error.
The `state show` command was not checking if a given resource had a
configured provider, and instead was only using the default provider
config. This PR checks for a configured provider, using the default
provider if one is not set.
Fixes#22010
This is a stepping-stone PR for the provider source project. In this PR
"legcay-stype" FQNs are created from the provider name string. Future
work involves encoding the FQN directly in the AbsProviderConfig and
removing the calls to addrs.NewLegacyProvider().
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
Following the same approach we use for other CLI-Config-able objects like
the service discovery system, the main package is responsible for
producing a suitable implementation of this interface which the command
package can then use.
When unit testing in the command package we can then substitute mocks as
necessary, following the dependency inversion principle.
The formatter in `command/format/state.go`, when formatting a resource
with an aliased provider, was looking for a schema with the alias (ie,
test.foo), but the schemas are only listed by provider type (test).
Update the state formatter to lookup schemas by provider type only.
Some of the show tests (and a couple others) were not properly cleaning
up the created tmpdirs, so I fixed those. Also, the show tests are using
a statefile named `state.tfstate`, but were not passing that path to the
show command, so we were getting some false positives (a `show` command
that returns `no state` exits 0).
Fixes#21462
* deps: bump terraform-config-inspect library
* configs: parse `version` in new required_providers block
With the latest version of `terraform-config-inspect`, the
required_providers attribute can now be a string or an object with
attributes "source" and "version". This change allows parsing the
version constraint from the new object while ignoring any given source attribute.
* command: use backend config from state when backend=false is used.
When a user runs `terraform init --backend=false`, terraform should
inspect the state for a previously-configured backend, and use that
backend, ignoring any backend config in the current configuration. If no
backend is configured or there is no state, return a local backend.
Fixes#16593
Clear any Dependencies if there is an entry matching a `state mv` from
address. While stale dependencies won't directly effect any current
operations, clearing the list will allow them to be recreated in their
entirety during refresh. This will help future releases that may rely
solely on the pre-calculated dependencies for destruction ordering.
* configs: move ProviderConfigCompact[Str] from addrs to configs
The configs package is aware of provider name and type (which are the
same thing today, but expected to be two different things in a future
release), and should be the source of truth for a provider config
address. This is an intermediate step; the next step will change the returned types to something based in the configs package.
* command: rename choosePlugins to chooseProviders to clarify scope of function
* use `Provider.LegacyString()` (instead of `Provider.Type`) consistently
* explicitly create legacy-style provider (continuing from above change)
When warnings appear in isolation (not accompanied by an error) it's
reasonable to want to defer resolving them for a while because they are
not actually blocking immediate work.
However, our warning messages tend to be long by default in order to
include all of the necessary context to understand the implications of
the warning, and that can make them overwhelming when combined with other
output.
As a compromise, this adds a new CLI option -compact-warnings which is
supported for all the main operation commands and which uses a more
compact format to print out warnings as long as they aren't also
accompanied by errors.
The default remains unchanged except that the threshold for consolidating
warning messages is reduced to one so that we'll now only show one of
each distinct warning summary.
Full warning messages are always shown if there's at least one error
included in the diagnostic set too, because in that case the warning
message could contain additional context to help understand the error.
The configs package is aware of provider name and type (which are the
same thing today, but expected to be two different things in a future
release), and should be the source of truth for a provider config
address.
* huge change to weave new addrs.Provider into addrs.ProviderConfig
* terraform: do not include an empty string in the returned Providers /
Provisioners
- Fixed a minor bug where results included an extra empty string
If a state mv target happens to be a resource that doesn't exist, allow
the creation of the new resource inferring the EachMode from the target
address.
* terraform/context: use new addrs.Provider as map key in provider factories
* added NewLegacyProviderType and LegacyString funcs to make it explicit that these are temporary placeholders
This PR introduces a new concept, provider fully-qualified name (FQN), encapsulated by the `addrs.Provider` struct.
Some of our warnings are produced in response to particular configuration
constructs which might appear many times across a Terraform configuration.
To avoid the warning output dwarfing all of the other output, we'll use
ConsolidateWarnings to limit each distinct warning summary to appear at
most twice, and annotate the final one in the sequence with an additional
paragraph noting that some number of them have been hidden.
This is intended as a compromise to ensure that these warnings are still
seen and noted but to help ensure that we won't produce so many of them
as to distract from other output that appears alongside them.
This applies only to warnings relating to specific configuration ranges;
errors will continue to be shown individually, and sourceless warnings
(which are rare in Terraform today) will likewise remain ungrouped because
they are less likely to be repeating the same statement about different
instances of the same problem throughout the configuration.
Meta.backendConfig was incorrectly treating the second return value from
loadBackendConfig as if it were go "error" rather than
tfdiags.Diagnostics, which in turn meant that it would treat warnings like
errors.
This had confusing results because it still returned that
tfdiags.Diagnostics value in its own diagnostics return value, causing the
caller to see warnings even though the backendConfig function had taken
the error codepath.
We have a special treatment for multi-line strings that are being updated
in-place where we show them across multiple lines in the plan output, but
we didn't use that same treatment for rendering multi-line strings in
isolation such as when they are being added for the first time.
Here we detect when we're rendering a multi-line string in a no-change
situation and render it using the diff renderer instead, using the same
value for old and new and thus producing a multi-line result without any
diff markers at all.
This improves consistency between the change and no-change cases, and
makes multi-line strings (such as YAML in block mode) readable in all
cases.
The DestroyEdgeTransformer cannot determine ordering from the graph when
the destroyers are from orphaned resources, because there are no
references to resolve. The new stored Dependencies provides what we need
to connect the instances in this case.
We also add the StateDependencies method directly in the
GraphNodeResourceInstance interface, since all instances already
implement this, and we don't need another optional interface to check.
The old code in DestroyEdgeTransformer may no longer be needed in the
long run, but that can be determined separately, since too many of the
tests start with an incomplete state and rely on the Dependencies being
determined from the configuration alone.
This "Plan" type, along with the other types it directly or indirectly
embeds and the associated functions, are adaptations of the
flatmap-oriented plan renderer logic from Terraform 0.11 and prior.
The current diff rendering logic is in diff.go, and so the contents of the
plan.go file are defunct apart from the DiffActionSymbol function that
both implementations share. Therefore here we move DiffActionSymbol into
diff.go and then remove plan.go entirely, in the interests of dead code
removal.
During the Terraform 0.12 work we briefly had a partial update of the old
Terraform 0.11 (and prior) diff renderer that could work with the new
plan structure, but could produce only partial results.
We switched to the new plan implementation prior to release, but the
"terraform show" command was left calling into the old partial
implementation, and thus produced incomplete results when rendering a
saved plan.
Here we instead use the plan rendering logic from the "terraform plan"
command, making the output of both identical.
Unfortunately, due to the current backend architecture that logic lives
inside the local backend package, and it contains some business logic
around state and schema wrangling that would make it inappropriate to move
wholesale into the command/format package. To allow for a low-risk fix to
the "terraform show" output, here we avoid some more severe refactoring by
just exporting the rendering functionality in a way that allows the
"terraform show" command to call into it.
In future we'd like to move all of the code that actually writes to the
output into the "command" package so that the roles of these components
are better segregated, but that is too big a change to block fixing this
issue.
We need to be able to reference all possible dependencies for ordering
when the configuration is no longer present, which means that absolute
addresses must be used. Since this is only to recreate the proper
ordering for instance destruction, only resources addresses need to be
listed rather than individual instance addresses.
`marshalPlannedValues` builds a map of modules to their children in
order to output the resource changes in a tree. The map was built from
the list of resource changes. However if a module had no resources
itself, and only called another module (a very normal case), that module
would not get added to the map causing none of its children to be
output in `planned_values`.
This PR adds a walk up through a given module's ancestors to ensure that
each module, even those without resources, would be added.
* command/validate: output a warning if unused flags are set
The -var and -var-file command line flags are accepted, but not used,
in `terraform validate`. This PR adds a warning for users who set either
of those flags, so they know that setting them has no effect.
Terraform Core expects all variables to be set, but for some ancillary
commands it's fine for them to just be set to placeholders because the
variable values themselves are not key to the command's functionality
as long as the terraform.Context is still self-consistent.
For such commands, rather than prompting for interactive input for
required variables we'll just stub them out as unknowns to reflect that
they are placeholders for values that a user would normally need to
provide.
This achieves a similar effect to how these commands behaved before, but
without the tendency to produce a slightly invalid terraform.Context that
would fail in strange ways when asked to run certain operations.
During the 0.12 work we intended to move all of the variable value
collection logic into the UI layer (command package and backend packages)
and present them all together as a unified data structure to Terraform
Core. However, we didn't quite succeed because the interactive prompts
for unset required variables were still being handled _after_ calling
into Terraform Core.
Here we complete that earlier work by moving the interactive prompts for
variables out into the UI layer too, thus allowing us to handle final
validation of the variables all together in one place and do so in the UI
layer where we have the most context still available about where all of
these values are coming from.
This allows us to fix a problem where previously disabling input with
-input=false on the command line could cause Terraform Core to receive an
incomplete set of variable values, and fail with a bad error message.
As a consequence of this refactoring, the scope of terraform.Context.Input
is now reduced to only gathering provider configuration arguments. Ideally
that too would move into the UI layer somehow in a future commit, but
that's a problem for another day.
* command/jsonstate: properly marshal deposed resources
This PR addresses 2 issues: `show -json` would crash if there was not a
`Current` `states.ResourceInstance` for a given resource, and `deposed`
resource instances were not shown at all.
Fixes#22642
Previously we were using the experimental HCL 2 repository, but now we'll
shift over to the v2 import path within the main HCL repository as part of
actually releasing HCL 2.0 as stable.
This is a mechanical search/replace to the new import paths. It also
switches to the v2.0.0 release of HCL, which includes some new code that
Terraform didn't previously have but should not change any behavior that
matters for Terraform's purposes.
For the moment the experimental HCL2 repository is still an indirect
dependency via terraform-config-inspect, so it remains in our go.sum and
vendor directories for the moment. Because terraform-config-inspect uses
a much smaller subset of the HCL2 functionality, this does still manage
to prune the vendor directory a little. A subsequent release of
terraform-config-inspect should allow us to completely remove that old
repository in a future commit.
* command/import: properly use `-provider` supplied on the command line
The import command now attaches the provider configuration in the resource
instance, if set. That config is attached to the NodeAbstractResource
during the import graph building. This prevents errors when the implied
provider is not actually in the configuration at all, which may happen
when a configuration is using the `-beta` version of a provider (and
only that `-beta` version).
* command/import: fix variable reassignment and update docs
Fixes#22564
This was a vestige from earlier prototyping when we were considering
supporting adding credentials to existing .tfrc native syntax files.
However, that proved impractical because the CLI config format is still
HCL 1.0 and that can't reliably perform programmatic surgical updates,
so we'll remove this option for now. We might add it back in later if it
becomes more practical to support it.
These run against a stub OAuth server implementation, verifying that we
are able to run an end-to-end login transaction for both the authorization
code and the password grant types.
This includes adding support for authorization code grants to our stub
OAuth server implementation; it previously supported only the password
grant type.
For unit testing in particular we can't launch a real browser for testing,
so this indirection is primarily to allow us to substitute a mock when
testing a command that can launch a browser.
This includes a simple mock implementation that expects to interact with
a running web server directly.
Because we're going to pass the credentials we obtain on to some
credentials store (either a credentials helper or a local file on disk)
we ought to disclose that first and give the user a chance to cancel out
and set up a different credentials storage mechanism first if desired.
This also includes the very beginnings of support for the owner password
grant type when running against app.terraform.io. This will be used only
temporarily at initial release to allow a faster initial release without
blocking on implementation of a full OAuth flow in Terraform Cloud.
The canonical location of the "template" provider is now in the hashicorp
namespace rather than the terraform-providers namespace, so the output
has changed to reflect that.
A more convenient interface to get a throwaway empty credentials source
for use in tests, which doesn't interact at all with the real CLI
configuration directory.
Previously `terraform console` would output an `init required` error if
it was run in a directory originally `init`ed with a `-plugin-dir`
specified.
Fixes#17826
This was a leftover from the migration of these types from the main
package, but we don't actually need or want this here because this
particular detail is still handled by the main package, and because the
cliconfig package must not depend on the command package in order to avoid
an import cycle.
This new implementation is not yet used, but should eventually replace the
technique of composing together various types from the svchost/auth
package, since our requirements are now complex enough that they're more
straightforward to express in direct code within a single type than as
a composition of the building blocks in the svchost/auth package.
Any command using meta.defaultFlagSet *might* occasionally exit before
the flag package's output got written. This caused flag error messages
to get lost. This PR discards the flag package output in favor of
directly returning the error to the end user.
Create the missing modules in the state when moving resources to a
module that doesn't yet exist. This allows for refactoring of
configuration into new modules, without having to create dummy resources
in the module before the "state mv" operations.
This is just a wholesale move of the CLI configuration types and functions
from the main package into its own package, leaving behind some type
aliases and wrappers for now to keep existing callers working.
This commit alone doesn't really achieve anything, but in future commits
we'll expand the functionality in this package.
* command/init: omit a warning if -backend-config is used with no backend
block
Terraform would silently accept - and swallow - `-backend-config` on the
CLI when there was no `backend` block. Since it is mostly expected to
override existing backend configuration, terraform
should omit a warning if there is no backend configuration to
override.
If the user intended to override the default (local) backend
configuration, they can first add a `backend` block to the `terraform` block to silence the warning (or just ignore it):
```hcl
terraform {
backend "local" {}
}
```
One of the show json command tests expected no error when presented with
an invalid configuration in a nested module. Modify the test created in
PR #21569 so that it can still verify there is no panic, but now expect
an error from init.
We always add an empty line when asking/checking the version. We should only do
that if there is a new version available. While this is purely cosmetic, it
reads better and is consistent with packer.
This includes a fix to make sure that an expression with a static string
index, like foo["bar"], will be parsed as a traversal rather than as a
dynamic index expression.
* command/show: marshal the state snapshot from the planfile
The planfile contains a state snapshot with certain resources updated
(outputs and datasources). Previously `terraform show -json PLANFILE`
was using the current state instead of the state inside the plan as
intended.
This caused an issue when the state included a terraform_remote_state
datasource. The datasource's state gets refreshed - and therefore
upgraded to the current state version - during plan, but that won't
persist to state until apply.
* update comment to reflect new return
In the unlikely event that a moduleCall has a nil config - for example,
if a nested module call includes a variable with a typo in an
attribute - continue gracefully.
* command/show -json: fix panic
afterUnknown should return only bools, not values.
* command/jsonplan: let's delete some redundant code!
the plan output was somewhat inconsistent with return values for
"after_unknown". This strives to fix that. If all "after" values are
known, return an empty object instead of iterating over values.
Also fixing some typos and general copypasta.
There is currently no way to unset -backend-config during init, since
not setting that option assumes the user will use the saved config.
Allow setting `-backend-config=""` to specify no overrides.
The omitUnknowns and unknownAsBool functions were previously trying hard
to preserve the same collection types in the output as they had in the
input, by attempting to keep everything matched up so that the results
would be valid.
Unfortunately, this turns out to be a harder problem than we originally
thought: it was possible for a collection value going in to produce
inconsistent element types out (and thus a panic) in the following
situations:
- when a collection with mixed known and unknown values was passed in
to omitUnknowns.
- when a collection of collections where the inner collections are a
mixture of empty and not empty in unknownAsNull.
The results of these functions are only used to marshal to JSON anyway,
and JSON serialization can't distinguish between the three sequence types
or the two mapping types, so in practice we can just standardize on
converting all sequences to tuple and all mappings to object here and not
change the resulting output at all, and then we don't have to worry about
making sure all of the inner types get preserved exactly.
A nice consequence of that relaxation is that we can now do what we
originally wanted to do with unknownAsBool, and omit map keys and
object attributes altogether if their values would've been false,
producing a much more compact result. This is easiest to do now when
there's only one known user of this JSON plan output, and we know that
user will treat both false and omitted as the same here.
The backend gets to "prepare" the configuration before Configure is
called, in order to validate the values and insert defaults. We don't
want to store this value in the "config state", because it will often
not match the raw config after it is prepared, forcing unecessary
backend migrations during init.
Since PrepareConfig is always called before Configure, we can store the
config value directly, and assume that it will be prepared in the same
manner each time.
If the backend config hashes match during init, and there are no new
backend override options, then we assume the existing config is OK.
Since init should be idempotent, we should be able to run init with no
options or config changes, and not effect the backends at all.
This includes a small fix to ensure the parser doesn't produce an invalid
body for block parsing syntax errors, and instead produces an incomplete
result that calling applications like Terraform can still analyze.
The problem here was affecting our version-constraint-sniffing code, which
intentionally tried to find a core version constraint even if there's a
syntax error so that it can report that a new version of Terraform is a
likely cause of the syntax error. It was working in most cases, unless
it was the "terraform" block itself that contained the error, because then
we'd try to analyze a broken hcl.Block with a nil body.
This includes a new test for "terraform init" that exercises this
recovery codepath.
There are a number of use cases that can require a user to select a workspace after initializing Terraform.
To make sure we cover all these use cases, we will always call the selectWorkspace method to verify a valid workspace is already selected or (if needed) offer to select one before moving on.
cty now guarantees that sets of primitive values will iterate in a
reasonable order. Previously it was the caller's responsibility to deal
with that, but we invariably neglected to do so, causing inconsistent
ordering. Since cty prioritizes consistent behavior over performance, it
now imposes its own sort on set elements as part of iterating over them so
that calling applications don't have to worry so much about it.
This change also causes cty to consistently push unknown and null values
in sets to the end of iteration, where before that was undefined. This
means that our diff output will now consistently list additions before
removals when showing sets, rather than the ordering being undefined as
before.
The ordering of known, non-null, non-primitive values is still not
contractually fixed but remains consistent for a particular version of
cty.
* internal/initwd: Allow deprecated relative module paths
In Terraform 0.11 we deprecated this form but didn't have any explicit
warning for it. Now we'll still accept it but generate a warning. In a
future major release we will drop this form altogether, since it is
ambiguous with registry module source addresses.
This codepath is covered by the command/e2etest suite.
* e2e: Skip copying .exists file, if present
We use this only in the "empty" test fixture in order to let git know that
the directory exists. We need to skip copying it so that we can test
"terraform init -from-module=...", which expects to find an empty
directory.
* command/e2etests: Re-enable and fix up the e2etest "acctests"
We disabled all of the tests that accessed remote services like the
Terraform Registry while they were being updated to support the new
protocols we now expect. With those services now in place, we can
re-enable these tests.
Some details of exactly what output we print, etc, have intentionally
changed since these tests were last updated.
* e2e: refactor for modern states and plans
* command/e2etest: re-enable e2etests and update for tf 0.12 compatibility
plugin/discovery: mkdirAll instead of mkdir when creating cache dir
Once you start reading from stdin, that is a blocking call that will
never finish. So when a context is canceled causing the input method to
return, the read will remain blocking in the running goroutine.
There isn't a real solution for it (e.g. its not possible to unblock the
read) so the only solution is to make the reader reusable.
When rendering the diff, the NoOp changes should come from the LCS
sequence, rather than the new sequence. The two indexes will not align
in many cases, adding the wrong new object or indexing out of bounds.
* command/state_list.go: fix bug loading user-defined state
If the user supplied a state path via the `-state` flag and terraform
was running in a workspace other than `default`, the state was not being
loaded properly. Fixes#19920
In study of existing providers we've found a pattern we werent previously
accounting for of using a nested block type to represent a group of
arguments that relate to a particular feature that is always enabled but
where it improves configuration readability to group all of its settings
together in a nested block.
The existing NestingSingle was not a good fit for this because it is
designed under the assumption that the presence or absence of the block
has some significance in enabling or disabling the relevant feature, and
so for these always-active cases we'd generate a misleading plan where
the settings for the feature appear totally absent, rather than showing
the default values that will be selected.
NestingGroup is, therefore, a slight variation of NestingSingle where
presence vs. absence of the block is not distinguishable (it's never null)
and instead its contents are treated as unset when the block is absent.
This then in turn causes any default values associated with the nested
arguments to be honored and displayed in the plan whenever the block is
not explicitly configured.
The current SDK cannot activate this mode, but that's okay because its
"legacy type system" opt-out flag allows it to force a block to be
processed in this way anyway. We're adding this now so that we can
introduce the feature in a future SDK without causing a breaking change
to the protocol, since the set of possible block nesting modes is not
extensible.
If the registry is unresponsive, you will now get an error
specific to this, rather than a misleading "provider unavailable" type
error. Also adds debug logging for when errors like this may occur
Due to these tests happening in the wrong order, removing an object from
the end of a sequence of objects would previously cause a bounds-check
panic.
Rather than a more severe rework of the logic here, for now we'll just
introduce an extra precondition to prevent the panic. The code that
follows already handles the case where there _is_ no new object (i.e. the
"old" object is being deleted) as long as we're able to pass through this
type-checking logic.
The new "JSON list of objects - removing item" test covers this problem
by rendering a diff for an object being removed from the end of a list
of objects within a JSON value.
Terraform Registry (and other registry implementations) can now return
an array of warnings with the versions response. These warnings are now
displayed to the user during a `terraform init`.
In earlier refactoring we updated these commands to support the new
address and state types, but attempted to partially retain the old-style
"StateFilter" abstraction that originally lived in the Terraform package,
even though that was no longer being used for any other functionality.
Unfortunately the adaptation of the existing filtering to the new types
wasn't exact and so these commands ended up having a few bugs that were
not covered by the existing tests.
Since the old StateFilter behavior was the source of various misbehavior
anyway, here it's removed altogether and replaced with some simpler
functions in the state_meta.go file that are tailored to the use-cases of
these sub-commands.
As well as just generally behaving more consistently with the other
parts of Terraform that use the new resource address types, this commit
fixes the following bugs:
- A resource address of aws_instance.foo would previously match an
resource of that type and name in any module, which disagreed with the
expected interpretation elsewhere of meaning a single resource in the
root module.
- The "terraform state mv" command was not supporting moves from a single
resource address to an indexed address and vice-versa, because the old
logic didn't need to make that distinction while they are two separate
address types in the new logic. Now we allow resources that do not have
count/for_each to be treated as if they are instances for the purposes
of this command, which is a better match for likely user intent and for
the old behavior.
Finally, we also clean up a little some of the usage output from these
commands, which hasn't been updated for some time and so had both some
stale information and some inaccurate terminology.
* command/providers schemas: return empty json object if config parses successfully but no providers found
* command/show (state): return an empty object if state is nil
* configs/configupgrade: detect possible relative module sources
If a module source appears to be a relative local path but does not have
a preceding ./, print a #TODO message for the user.
* internal/initwd: limit go-getter detectors to those supported by terraform
* internal/initwd: move isMaybeRelativeLocalPath check into getWithGoGetter
To avoid making two calls to getter.Detect, which potentially makes
non-trivial API calls, the "isMaybeRelativeLocalPath" check was moved to
a later step and a custom error type was added so user-friendly
diagnostics could be displayed in the event that a possible relative local
path was detected.
Our initial prototype of new-style diff rendering excluded this because
the old SDK has no support for this construct. However, we want to be able
to introduce this construct in the new SDK without breaking compatibility
with existing versions of Terraform Core, so we need to implement it now
so it's ready to be used once the SDK implements it.
The key associated with each block allows us to properly correlate the
items to recognize the difference between an in-place update of an
existing block and the addition/deletion of a block.
Our null-to-empty normalization was previously assuming these would always
be collection types, but that isn't true when a block contains something
dynamic since we must then use tuple or object types instead to properly
represent all of the individual element types.
We use cty a little differently when a nested list block contains a
dynamically-typed attribute: it appears as a tuple value instead of a
list value so that we can retain the individual types of each element.
Here we introduce a test for that case, but doing so required also making
the runTestCases function handle types in a stricter way so that it will
produce planned values that match how Terraform Core would do it,
including the necessary late-bound type information for the
dynamically-typed attribute.
Alisdair McDiarmid