Commit Graph

19 Commits

Author SHA1 Message Date
João G. Packer fd47260fdc
command: adjust exit code of state rm (#22300)
* command: adjust exit code of state rm and state mv

Commands `state rm` and `state mv` will now exit with code 1 when the
target resource is not found in the current state.
This is consistent with `terraform state show non_existent_resource`.

Fixes #17800
2020-06-24 14:03:23 -04:00
James Bardin e13eecbc5b finish provider ModuleInstance replacement 2020-03-11 14:19:52 -04:00
Kristin Laemmert 47a16b0937
addrs: embed Provider in AbsProviderConfig instead of Type
a large refactor to addrs.AbsProviderConfig, embedding the addrs.Provider instead of a Type string. I've added and updated tests, added some Legacy functions to support older state formats and shims, and added a normalization step when reading v4 (current) state files (not the added tests under states/statefile/roundtrip which work with both current and legacy-style AbsProviderConfig strings).

The remaining 'fixme' and 'todo' comments are mostly going to be addressed in a subsequent PR and involve looking up a given local provider config's FQN. This is fine for now as we are only working with default assumption.
2020-02-13 15:32:58 -05:00
Martin Atkins 8b511524d6
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses

In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.

This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.

In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
  package, including removing addrs.NewLegacyProvider and
  addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
  in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
  work with addrs.Provider to identify providers, rather than legacy
  strings.

In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.

* addrs: ProviderConfig interface

In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.

We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.

In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.

This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.

* rename LocalType to LocalName

Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 08:23:07 -05:00
Kristin Laemmert 6541775ce4
addrs: roll back change to Type field in ProviderConfig (#23937) 2020-01-28 08:13:30 -05:00
Kristin Laemmert e3416124cc
addrs: replace "Type string" with "Type Provider" in ProviderConfig
* huge change to weave new addrs.Provider into addrs.ProviderConfig
* terraform: do not include an empty string in the returned Providers /
Provisioners
- Fixed a minor bug where results included an extra empty string
2019-12-06 08:00:18 -05:00
Martin Atkins c39905e1a8 command: Fix various issues in the "terraform state ..." subcommands
In earlier refactoring we updated these commands to support the new
address and state types, but attempted to partially retain the old-style
"StateFilter" abstraction that originally lived in the Terraform package,
even though that was no longer being used for any other functionality.

Unfortunately the adaptation of the existing filtering to the new types
wasn't exact and so these commands ended up having a few bugs that were
not covered by the existing tests.

Since the old StateFilter behavior was the source of various misbehavior
anyway, here it's removed altogether and replaced with some simpler
functions in the state_meta.go file that are tailored to the use-cases of
these sub-commands.

As well as just generally behaving more consistently with the other
parts of Terraform that use the new resource address types, this commit
fixes the following bugs:

- A resource address of aws_instance.foo would previously match an
  resource of that type and name in any module, which disagreed with the
  expected interpretation elsewhere of meaning a single resource in the
  root module.

- The "terraform state mv" command was not supporting moves from a single
  resource address to an indexed address and vice-versa, because the old
  logic didn't need to make that distinction while they are two separate
  address types in the new logic. Now we allow resources that do not have
  count/for_each to be treated as if they are instances for the purposes
  of this command, which is a better match for likely user intent and for
  the old behavior.

Finally, we also clean up a little some of the usage output from these
commands, which hasn't been updated for some time and so had both some
stale information and some inaccurate terminology.
2019-03-18 09:19:55 -07:00
Sander van Harmelen 7ec3f96e3a command/state: update and fix the state mv command 2018-10-27 15:01:07 +02:00
Sander van Harmelen 19c1241a50 command/state: update and fix the state rm command 2018-10-24 10:59:33 +02:00
Martin Atkins 66f96cf842 command: Un-stub and reimplement "terraform state rm"
This was previously targeting the old state manager and state types, so it
needed some considerable rework to get it working again with the new state
types.

Since our new resource address syntax lacks the weird extra .deposed
special case we had before, we instead interpret addresses as
whole-instance addresses here and remove the deposed objects along with
the current one (if present), since this is more likely to match with
user expectations because we don't consider deposed objects to be
independently addressable in any other situation.

With that said, to be more explicit about what is going on we do now have
a -dry-run mode and maintain separate counts of current and deposed
instances so that we can expose that in the UI where relevant.
2018-10-16 19:14:11 -07:00
Martin Atkins a3403f2766 terraform: Ugly huge change to weave in new State and Plan types
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.

The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.

The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.

Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
2018-10-16 19:11:09 -07:00
James Bardin 51547ad2ba add tests for state commands through a backend 2017-07-27 18:06:47 -04:00
James Bardin 33ba6774e0 Make the state commands use the real command.Meta
In order to use a backend for the state commands, we need an initialized
meta. Use a single Meta instance rather than temporary ones to make sure
the backends are initialized properly.
2017-07-27 15:33:50 -04:00
Martin Atkins fee1197cf9 command: terraform state rm to require at least one argument
Due to how the state filter machinery works, passing no arguments is valid
and matches _all_ resources.

It is very unlikely that someone wants to remove everything from state, so
this ends up being a very dangerous default for the "terraform state rm"
command, and surprising for someone who perhaps runs it looking for the
usage information.

So we'll be pragmatic here and reject the no-arguments case for this
command, accepting that it makes the unlikely case of intentionally
deleting all resources harder in order to make it less likely that it
will happen _unintentionally_.

If someone does really want to remove all resources from the state, they
can provide an explicit empty string argument, but this isn't documented
because it's a weird case that doesn't seem worth mentioning.

This fixes #15283.
2017-07-05 16:19:32 -07:00
James Bardin 6e7baaaeff don't load the backend when -state is provided
When using a `state` command, if the `-state` flag is provided we do not
want to modify the Backend state. In this case we should always create a
local state instance.

The backup flag was also being ignored, and some tests were relying on
that, which have been fixed.
2017-06-23 14:41:49 -04:00
Martin Atkins 8364383c35 Push plugin discovery down into command package
Previously we did plugin discovery in the main package, but as we move
towards versioned plugins we need more information available in order to
resolve plugins, so we move this responsibility into the command package
itself.

For the moment this is just preserving the existing behavior as long as
there are only internal and unversioned plugins present. This is the
final state for provisioners in 0.10, since we don't want to support
versioned provisioners yet. For providers this is just a checkpoint along
the way, since further work is required to apply version constraints from
configuration and support additional plugin search directories.

The automatic plugin discovery behavior is not desirable for tests because
we want to mock the plugins there, so we add a new backdoor for the tests
to use to skip the plugin discovery and just provide their own mock
implementations. Most of this diff is thus noisy rework of the tests to
use this new mechanism.
2017-06-09 14:03:59 -07:00
Mitchell Hashimoto e4d2193ed6
command/state: mv and rm -backup works
Fixes #12154

The "-backup" flag before for "state *" CLI had some REALLY bizarre behavior:
it would change the _destination_ state and actually not create any
additional backup at all (the original state was unchanged and the
normal timestamped backup still are written). Really weird.

This PR makes the -backup flag work as you'd expect with one caveat:
we'll _still_ create the timestamped backup file. The timestamped backup
file helps make sure that you always get a backup history when using
these commands. We don't want to make it easy for you to overwrite a
state with the `-backup` flag.
2017-02-21 21:10:03 -08:00
Paul Stack 4d46812bab Update state_rm_test.go
Removing sort as it was imported and not used
2016-08-16 18:10:38 +01:00
Mitchell Hashimoto 3fdc08a9eb core: Add `terraform state rm` command and docs
This commit adds the `state rm` command for removing an address from
state. It is the result of a rebase from pull-request #5953 which was
lost at some point during the Terraform 0.7 feature branch merges.
2016-08-16 16:45:44 +01:00