This more closely replicates the 0.12-and-earlier behavior, where having
at least one version of a provider installed locally would totally disable
any attempt to look for newer versions remotely.
This is just for the implicit default behavior. Assumption is that later
we'll have an explicit configuration mechanism that will allow the user
to specify exactly where to look for what, and thus avoid tricky
heuristics like this.
Providers installed from the registry are accompanied by a list of
checksums (the "SHA256SUMS" file), which is cryptographically signed to
allow package authentication. The process of verifying this has multiple
steps:
- First we must verify that the SHA256 hash of the package archive
matches the expected hash. This could be done for local installations
too, in the future.
- Next we ensure that the expected hash returned as part of the registry
API response matches an entry in the checksum list.
- Finally we verify the cryptographic signature of the checksum list,
using the public keys provided by the registry.
Each of these steps is implemented as a separate PackageAuthentication
type. The local archive installation mechanism uses only the archive
checksum authenticator, and the HTTP installation uses all three in the
order given.
The package authentication system now also returns a result value, which
is used by command/init to display the result of the authentication
process.
There are three tiers of signature, each of which is presented
differently to the user:
- Signatures from the embedded HashiCorp public key indicate that the
provider is officially supported by HashiCorp;
- If the signing key is not from HashiCorp, it may have an associated
trust signature, which indicates that the provider is from one of
HashiCorp's trusted partners;
- Otherwise, if the signature is valid, this is a community provider.
The providers command has been refactored to use the modern provider types and
ProviderRequirements() functions. This resulted in a breaking change to
the output: it no longer outputs the providers by module and no longer
prints `(inherited)` or `(from state)` to show why a provider is
included. We decided that at this time it was best to stick with the
existing functions and make this change, but if we get feedback from the
community we will revisit.
Additional tests to exercise providers in modules and providers from
state have been included.
This PR adds iteration through any provider configuration blocks in the
config in addProviderRequirements().
A stale comment (of mine!) would leave one expecting the
module.ProviderRequirements to include any requirements from provider
configs. The comment was inaccurate and has been updated.
When a provider dependency is implicit rather than explicit, or otherwise
when version constraints are lacking, we produce a warning recommending
the addition of explicit version constraints in the configuration.
This restores the warning functionality from previous Terraform versions,
adapting it slightly to account for the new provider FQN syntax and to
recommend using a required_providers block rather than version constraints
in "provider" blocks, because the latter is no longer recommended in the
documentation.
The fake installable package meta used a ZIP archive which gave
different checksums between macOS and Linux targets. This commit removes
the target from the contents of this archive, and updates the golden
hash value in the test to match. This test should now pass on both
platforms.
The provider fully-qualified name string used in configuration is very
long, and since most providers are hosted in the public registry, most
of that length is redundant. This commit adds and uses a `ForDisplay`
method, which simplifies the presentation of provider FQNs.
If the hostname is the default hostname, we now display only the
namespace and type. This is only used in UI, but should still be
unambiguous, as it matches the FQN string parsing behaviour.
This restores some of the local search directories we used to include when
searching for provider plugins in Terraform 0.12 and earlier. The
directory structures we are expecting in these are different than before,
so existing directory contents will not be compatible without
restructuring, but we need to retain support for these local directories
so that users can continue to sideload third-party provider plugins until
the explicit, first-class provider mirrors configuration (in CLI config)
is implemented, at which point users will be able to override these to
whatever directories they want.
This also includes some new search directories that are specific to the
operating system where Terraform is running, following the documented
layout conventions of that platform. In particular, this follows the
XDG Base Directory specification on Unix systems, which has been a
somewhat-common request to better support "sideloading" of packages via
standard Linux distribution package managers and other similar mechanisms.
While it isn't strictly necessary to add that now, it seems ideal to do
all of the changes to our search directory layout at once so that our
documentation about this can cleanly distinguish "0.12 and earlier" vs.
"0.13 and later", rather than having to document a complex sequence of
smaller changes.
Because this behavior is a result of the integration of package main with
package command, this behavior is verified using an e2etest rather than
a unit test. That test, TestInitProvidersVendored, is also fixed here to
create a suitable directory structure for the platform where the test is
being run. This fixes TestInitProvidersVendored.
There was a remaining TODO in this package to find the true provider FQN
when looking up the schema for a resource type. We now have that data
available in the Provider field of configs.Resource, so we can now
complete that change.
The tests for this functionality actually live in the parent "command"
package as part of the tests for the "terraform show" command, so this
fix is verified by all of the TestShow... tests now passing except one,
and that remaining one is failing for some other reason which we'll
address in a later commit.
Built-in providers are special providers that are distributed as part of
Terraform CLI itself, rather than being installed separately. They always
live in the terraform.io/builtin/... namespace so it's easier to see that
they are special, and currently there is only one built-in provider named
"terraform".
Previous commits established the addressing scheme for built-in providers.
This commit makes the installer aware of them to the extent that it knows
not to try to install them the usual way and it's able to report an error
if the user requests a built-in provider that doesn't exist or tries to
impose a particular version constraint for a built-in provider.
For the moment the tests for this are the ones in the "command" package
because that's where the existing testing infrastructure for this
functionality lives. A later commit should add some more focused unit
tests here in the internal/providercache package, too.
* command: refactor testBackendState to write states.State
testBackendState was using the older terraform.State format, which is no
longer sufficient for most tests since the state upgrader does not
encode provider FQNs automatically. Users will run `terraform
0.13upgrade` to update their state to include provider FQNs in
resources, but tests need to use the modern state format instead of
relying on the automatic upgrade.
* plan tests passing
* graph tests passing
* json packages test update
* command test updates
* update show test fixtures
* state show tests passing
In the new design the ProviderSource is decided by package main, not by
the "command" package, and so making sure the vendor directory is included
is the responsibility of that package instead. Therefore we can no longer
test this at the "command" package level, but we'll retain a test for it
in e2etests to record that it isn't currently working, so that we have
a prompt to fix it before releasing.
Due to some incomplete rework of this function in an earlier commit, the
safety check for using the same directory as both the target and the
cache was inverted and was raising an error _unless_ they matched, rather
than _if_ they matched.
This change is verified by the e2etest TestInitProviders_pluginCache,
which is also updated to use the new-style cache directory layout as part
of this commit.
These tests make assertions against specific user-oriented output from the
"terraform init" command, but we've intentionally changed some of these
messages as part of introducing support for the decentralized provider
namespace.
Both of these are attempting to test -plugin-dir, which means we need some
additional help to populate some suitable directories for -plugin-dir to
refer to. The new installFakeProviderPackagesElsewhere helper generalizes
the earlier installFakeProviderPackages to allow installing fake provider
packages to an arbitrary other directory.
This test is focused on making sure that the required_providers syntax
is working, so the rewritten version does not include any special handling
of pre-installed packages or "vendored" packages. Pre-installed plugins
are tested in other tests such as TestInit_getUpgradePlugins.
This test now requires a bit of a different approach because it was
previously directly constructing a cache directory but we now use a
different directory layout.
Rather than manually constructing the new heirarchical directory layout
(which would've required a lot more inline code), this introduces a helper
function installFakeProviderPackages that installs a fake provider package
directly into the local cache directory associated with a Meta object,
with the correct directory layout.
This is a slightly different approach than we used to take for this
option: rather than disabling the installer and causing all future
commands to look elsewhere for plugins, we'll now leave the installer
enabled by constrain it to only look at the given directories.
This is overall simpler because it doesn't require any special tracking
of the plugin directories for subsequent commands. Instead, the selections
file generated by the installer will record the versions it selected from
the specified directories, and we'll link them in to the local cache just
as we would normally so that other commands don't need to do anything
special to select the right plugins in either case.
They still aren't passing, but this is just enough updating to make the
test program compile successfully after the refactoring related to
provider installation. They are now using the mock provider source offered
by the getproviders package, which is similar but not totally identical
to the idea of mocking the entire installer as these tests used to do, and
so many of them need further adjustment to still be testing what they
intended to test under this new architecture.
Subsequent commits will gradually repair the failing tests.
* terraform: add helper functions for creating test state
testSetResourceInstanceCurrent and testSetResourceInstanceTainted are
wrapper functions around states.Module.SetResourceInstanceCurrent()
used to set a resource in state. They work with current, non-deposed
resources with no dependencies.
testSetResourceInstanceDeposed can be used to set a desosed resource in state.
* terraform: update all tests to use modern providers and state
Back when we first introduced provider versioning in Terraform 0.10, we
did the provider version resolution in terraform.NewContext because we
weren't sure yet how exactly our versioning model was going to play out
(whether different versions could be selected per provider configuration,
for example) and because we were building around the limitations of our
existing filesystem-based plugin discovery model.
However, the new installer codepath is new able to do all of the
selections up front during installation, so we don't need such a heavy
inversion of control abstraction to get this done: the command package can
select the exact provider versions and pass their factories directly
to terraform.NewContext as a simple static map.
The result of this commit is that CLI commands other than "init" are now
able to consume the local cache directory and selections produced by the
installation process in "terraform init", passing all of the selected
providers down to the terraform.NewContext function for use in
implementing the main operations.
This commit is just enough to get the providers passing into the
terraform.Context. There's still plenty more to do here, including to
repair all of the tests this change has additionally broken.
There's still a lot of work to do here around both the UX and the
follow-up steps that need to happen after installation completes, but this
is enough to faciliate some initial end-to-end testing of the new-style
install process.
Terraform 0.13 will allow the installation of providers from various
sources. If a user updates their configuration to change the source of
an in-use provider (for example, if the provider namespace changes),
they will also need to update the state file accordingly.
This commit introduces a new `state replace-provider` subcommand which
supports this. All resources using the `from` provider will be updated
to use the `to` provider.
Previously, if a diagnostic context spanned multiple lines, any lines
which did not overlap with the highlight range would be displayed as
blank. This commit fixes the bug.
The problem was caused by the unconditional use of `PartitionAround` to
split the line into before/highlighted/after ranges. When two ranges
don't overlap, this method returns empty ranges, which results in a
blank line. Instead, we first check if the ranges do overlap, and if not
we print the entire line from the context.
Previously, diagnostic errors would display the filename and line
number, along with "(source code not available)". This is because the
fmt command directly loads and parses the configuration, instead of
using the config loader.
This commit registers the manually parsed source as a synthetic
configuration file, so that the diagnostic formatter can look up the
source for the range with the error and display it.
These new functions allow command implementations to get hold of the
providercache objects and installation source object derived from the
current CLI configuration.
missingPlugins was hard-coded to work only with provider plugins, so I
renamed it to clarify the usage.
Also renamed a test provider from greater_than to greater-than as the
underscore is an invalid provider name character and this will become a
hard error in the near future.
* import: remove Config from ImportOpts
`Config` in ImportOpts was any provider configuration provided by the
user on the command line. This option has already been removed in favor
of only taking the provider from the configuration loaded in the current
context.
* terrafrom: add Config to ImportStateTransformer and refactor Transform
to get the resource provider FQN from the Config
Implement a new provider_meta block in the terraform block of modules, allowing provider-keyed metadata to be communicated from HCL to provider binaries.
Bundled in this change for minimal protocol version bumping is the addition of markdown support for attribute descriptions and the ability to indicate when an attribute is deprecated, so this information can be shown in the schema dump.
Co-authored-by: Paul Tyng <paul@paultyng.net>
* command/jsonstate: fix inconsistency with resource address
Resource addresses in state output were not including index for
instances created with for_each or count, while the index was appearing
in the plan output. This PR fixes that inconsistency, adds tests, and
updates the existing tests.
Fixes#24110
* add tests showing expected prior state resource addressing
* added example of show json state output with modules
Our initial Terraform 0.13.0 release will continue to support only the
hard-coded official HashiCorp signing key, with support for other keys to
follow in a later release once the trust infrastructure is in place to
support that.
This change is intended to (marginally) improve the UX for a possible
future situation where a HashiCorp-distributed provider makes a released
signed with a new key and a prior version of Terraform ends up trying to
install it due to incorrect version constraints. With this new text we
hope to give the user a better prompt for onward troubleshooting, but
in a sort of hedging way because we have not yet finalized the details of
how new keys might roll out in practice.
Hopefully a user seeing this message would consult the release notes for
Terraform itself and for the provider in question and find some
as-yet-undetermined information about how to proceed.
If the decentralized trust model design comes together before the v0.13.0
release then we may make further amendments here to prepare for that, but
that work should not block the v0.13.0 release if other work concludes
first.
* WIP: dynamic expand
* WIP: add variable and local support
* WIP: outputs
* WIP: Add referencer
* String representation, fixing tests it impacts
* Fixes TestContext2Apply_outputOrphanModule
* Fix TestContext2Apply_plannedDestroyInterpolatedCount
* Update DestroyOutputTransformer and associated types to reflect PlannableOutputs
* Remove comment about locals
* Remove module count enablement
* Removes allowing count for modules, and reverts the test,
while adding a Skip()'d test that works when you re-enable
the config
* update TargetDownstream signature to match master
* remove unnecessary method
Co-authored-by: James Bardin <j.bardin@gmail.com>
If an error occurs on creating the context for console or import, we
would fail to unlock the state. Fix this by unlocking slightly earlier.
Affects console and import commands.
Fixes#23318
* fix outdated syntax in comments
* test for non-strings in ParseAbsProviderConfig
* ProviderConfigDefault and ProviderConfigAliased now take Providers
instead of strings
a large refactor to addrs.AbsProviderConfig, embedding the addrs.Provider instead of a Type string. I've added and updated tests, added some Legacy functions to support older state formats and shims, and added a normalization step when reading v4 (current) state files (not the added tests under states/statefile/roundtrip which work with both current and legacy-style AbsProviderConfig strings).
The remaining 'fixme' and 'todo' comments are mostly going to be addressed in a subsequent PR and involve looking up a given local provider config's FQN. This is fine for now as we are only working with default assumption.
With the current implementation of terraform login, Windows Subsystem
for Linux fails to open a browser due to lack of support for xdg-open.
This commit reuses a fix from pkg/browser#8 which detects a WSL
environment and uses cmd.exe to open the URL instead.
Now that #22862 has been merged, terraform will properly pick up the
resource provider configuration from state. We can remove the deprecated
`-provider` flag.
There was an order-of-operations bug where the import graph builder was
validating that the provider did not have any resource references before
references were actually being attached. This PR fixes the order of
operations and adds a test (in the command package).
Fixes#22804
When a token is pasted by the user, we make a request to the
TFE API /account/details endpoint to verify its validity. If successful,
we display the logged-in username as confirmation. If not, we refuse to
store the invalid token and display an error message.
This commit also trims whitespace from around the pasted value, to
reduce the likelihood of a copy & paste error.
The `state show` command was not checking if a given resource had a
configured provider, and instead was only using the default provider
config. This PR checks for a configured provider, using the default
provider if one is not set.
Fixes#22010
This is a stepping-stone PR for the provider source project. In this PR
"legcay-stype" FQNs are created from the provider name string. Future
work involves encoding the FQN directly in the AbsProviderConfig and
removing the calls to addrs.NewLegacyProvider().
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
Following the same approach we use for other CLI-Config-able objects like
the service discovery system, the main package is responsible for
producing a suitable implementation of this interface which the command
package can then use.
When unit testing in the command package we can then substitute mocks as
necessary, following the dependency inversion principle.
The formatter in `command/format/state.go`, when formatting a resource
with an aliased provider, was looking for a schema with the alias (ie,
test.foo), but the schemas are only listed by provider type (test).
Update the state formatter to lookup schemas by provider type only.
Some of the show tests (and a couple others) were not properly cleaning
up the created tmpdirs, so I fixed those. Also, the show tests are using
a statefile named `state.tfstate`, but were not passing that path to the
show command, so we were getting some false positives (a `show` command
that returns `no state` exits 0).
Fixes#21462
* deps: bump terraform-config-inspect library
* configs: parse `version` in new required_providers block
With the latest version of `terraform-config-inspect`, the
required_providers attribute can now be a string or an object with
attributes "source" and "version". This change allows parsing the
version constraint from the new object while ignoring any given source attribute.
* command: use backend config from state when backend=false is used.
When a user runs `terraform init --backend=false`, terraform should
inspect the state for a previously-configured backend, and use that
backend, ignoring any backend config in the current configuration. If no
backend is configured or there is no state, return a local backend.
Fixes#16593
Clear any Dependencies if there is an entry matching a `state mv` from
address. While stale dependencies won't directly effect any current
operations, clearing the list will allow them to be recreated in their
entirety during refresh. This will help future releases that may rely
solely on the pre-calculated dependencies for destruction ordering.
* configs: move ProviderConfigCompact[Str] from addrs to configs
The configs package is aware of provider name and type (which are the
same thing today, but expected to be two different things in a future
release), and should be the source of truth for a provider config
address. This is an intermediate step; the next step will change the returned types to something based in the configs package.
* command: rename choosePlugins to chooseProviders to clarify scope of function
* use `Provider.LegacyString()` (instead of `Provider.Type`) consistently
* explicitly create legacy-style provider (continuing from above change)
When warnings appear in isolation (not accompanied by an error) it's
reasonable to want to defer resolving them for a while because they are
not actually blocking immediate work.
However, our warning messages tend to be long by default in order to
include all of the necessary context to understand the implications of
the warning, and that can make them overwhelming when combined with other
output.
As a compromise, this adds a new CLI option -compact-warnings which is
supported for all the main operation commands and which uses a more
compact format to print out warnings as long as they aren't also
accompanied by errors.
The default remains unchanged except that the threshold for consolidating
warning messages is reduced to one so that we'll now only show one of
each distinct warning summary.
Full warning messages are always shown if there's at least one error
included in the diagnostic set too, because in that case the warning
message could contain additional context to help understand the error.
The configs package is aware of provider name and type (which are the
same thing today, but expected to be two different things in a future
release), and should be the source of truth for a provider config
address.
* huge change to weave new addrs.Provider into addrs.ProviderConfig
* terraform: do not include an empty string in the returned Providers /
Provisioners
- Fixed a minor bug where results included an extra empty string
If a state mv target happens to be a resource that doesn't exist, allow
the creation of the new resource inferring the EachMode from the target
address.
* terraform/context: use new addrs.Provider as map key in provider factories
* added NewLegacyProviderType and LegacyString funcs to make it explicit that these are temporary placeholders
This PR introduces a new concept, provider fully-qualified name (FQN), encapsulated by the `addrs.Provider` struct.
Some of our warnings are produced in response to particular configuration
constructs which might appear many times across a Terraform configuration.
To avoid the warning output dwarfing all of the other output, we'll use
ConsolidateWarnings to limit each distinct warning summary to appear at
most twice, and annotate the final one in the sequence with an additional
paragraph noting that some number of them have been hidden.
This is intended as a compromise to ensure that these warnings are still
seen and noted but to help ensure that we won't produce so many of them
as to distract from other output that appears alongside them.
This applies only to warnings relating to specific configuration ranges;
errors will continue to be shown individually, and sourceless warnings
(which are rare in Terraform today) will likewise remain ungrouped because
they are less likely to be repeating the same statement about different
instances of the same problem throughout the configuration.
Meta.backendConfig was incorrectly treating the second return value from
loadBackendConfig as if it were go "error" rather than
tfdiags.Diagnostics, which in turn meant that it would treat warnings like
errors.
This had confusing results because it still returned that
tfdiags.Diagnostics value in its own diagnostics return value, causing the
caller to see warnings even though the backendConfig function had taken
the error codepath.
We have a special treatment for multi-line strings that are being updated
in-place where we show them across multiple lines in the plan output, but
we didn't use that same treatment for rendering multi-line strings in
isolation such as when they are being added for the first time.
Here we detect when we're rendering a multi-line string in a no-change
situation and render it using the diff renderer instead, using the same
value for old and new and thus producing a multi-line result without any
diff markers at all.
This improves consistency between the change and no-change cases, and
makes multi-line strings (such as YAML in block mode) readable in all
cases.
The DestroyEdgeTransformer cannot determine ordering from the graph when
the destroyers are from orphaned resources, because there are no
references to resolve. The new stored Dependencies provides what we need
to connect the instances in this case.
We also add the StateDependencies method directly in the
GraphNodeResourceInstance interface, since all instances already
implement this, and we don't need another optional interface to check.
The old code in DestroyEdgeTransformer may no longer be needed in the
long run, but that can be determined separately, since too many of the
tests start with an incomplete state and rely on the Dependencies being
determined from the configuration alone.
This "Plan" type, along with the other types it directly or indirectly
embeds and the associated functions, are adaptations of the
flatmap-oriented plan renderer logic from Terraform 0.11 and prior.
The current diff rendering logic is in diff.go, and so the contents of the
plan.go file are defunct apart from the DiffActionSymbol function that
both implementations share. Therefore here we move DiffActionSymbol into
diff.go and then remove plan.go entirely, in the interests of dead code
removal.
During the Terraform 0.12 work we briefly had a partial update of the old
Terraform 0.11 (and prior) diff renderer that could work with the new
plan structure, but could produce only partial results.
We switched to the new plan implementation prior to release, but the
"terraform show" command was left calling into the old partial
implementation, and thus produced incomplete results when rendering a
saved plan.
Here we instead use the plan rendering logic from the "terraform plan"
command, making the output of both identical.
Unfortunately, due to the current backend architecture that logic lives
inside the local backend package, and it contains some business logic
around state and schema wrangling that would make it inappropriate to move
wholesale into the command/format package. To allow for a low-risk fix to
the "terraform show" output, here we avoid some more severe refactoring by
just exporting the rendering functionality in a way that allows the
"terraform show" command to call into it.
In future we'd like to move all of the code that actually writes to the
output into the "command" package so that the roles of these components
are better segregated, but that is too big a change to block fixing this
issue.
We need to be able to reference all possible dependencies for ordering
when the configuration is no longer present, which means that absolute
addresses must be used. Since this is only to recreate the proper
ordering for instance destruction, only resources addresses need to be
listed rather than individual instance addresses.
`marshalPlannedValues` builds a map of modules to their children in
order to output the resource changes in a tree. The map was built from
the list of resource changes. However if a module had no resources
itself, and only called another module (a very normal case), that module
would not get added to the map causing none of its children to be
output in `planned_values`.
This PR adds a walk up through a given module's ancestors to ensure that
each module, even those without resources, would be added.
* command/validate: output a warning if unused flags are set
The -var and -var-file command line flags are accepted, but not used,
in `terraform validate`. This PR adds a warning for users who set either
of those flags, so they know that setting them has no effect.
Terraform Core expects all variables to be set, but for some ancillary
commands it's fine for them to just be set to placeholders because the
variable values themselves are not key to the command's functionality
as long as the terraform.Context is still self-consistent.
For such commands, rather than prompting for interactive input for
required variables we'll just stub them out as unknowns to reflect that
they are placeholders for values that a user would normally need to
provide.
This achieves a similar effect to how these commands behaved before, but
without the tendency to produce a slightly invalid terraform.Context that
would fail in strange ways when asked to run certain operations.
During the 0.12 work we intended to move all of the variable value
collection logic into the UI layer (command package and backend packages)
and present them all together as a unified data structure to Terraform
Core. However, we didn't quite succeed because the interactive prompts
for unset required variables were still being handled _after_ calling
into Terraform Core.
Here we complete that earlier work by moving the interactive prompts for
variables out into the UI layer too, thus allowing us to handle final
validation of the variables all together in one place and do so in the UI
layer where we have the most context still available about where all of
these values are coming from.
This allows us to fix a problem where previously disabling input with
-input=false on the command line could cause Terraform Core to receive an
incomplete set of variable values, and fail with a bad error message.
As a consequence of this refactoring, the scope of terraform.Context.Input
is now reduced to only gathering provider configuration arguments. Ideally
that too would move into the UI layer somehow in a future commit, but
that's a problem for another day.
* command/jsonstate: properly marshal deposed resources
This PR addresses 2 issues: `show -json` would crash if there was not a
`Current` `states.ResourceInstance` for a given resource, and `deposed`
resource instances were not shown at all.
Fixes#22642
Previously we were using the experimental HCL 2 repository, but now we'll
shift over to the v2 import path within the main HCL repository as part of
actually releasing HCL 2.0 as stable.
This is a mechanical search/replace to the new import paths. It also
switches to the v2.0.0 release of HCL, which includes some new code that
Terraform didn't previously have but should not change any behavior that
matters for Terraform's purposes.
For the moment the experimental HCL2 repository is still an indirect
dependency via terraform-config-inspect, so it remains in our go.sum and
vendor directories for the moment. Because terraform-config-inspect uses
a much smaller subset of the HCL2 functionality, this does still manage
to prune the vendor directory a little. A subsequent release of
terraform-config-inspect should allow us to completely remove that old
repository in a future commit.
* command/import: properly use `-provider` supplied on the command line
The import command now attaches the provider configuration in the resource
instance, if set. That config is attached to the NodeAbstractResource
during the import graph building. This prevents errors when the implied
provider is not actually in the configuration at all, which may happen
when a configuration is using the `-beta` version of a provider (and
only that `-beta` version).
* command/import: fix variable reassignment and update docs
Fixes#22564
This was a vestige from earlier prototyping when we were considering
supporting adding credentials to existing .tfrc native syntax files.
However, that proved impractical because the CLI config format is still
HCL 1.0 and that can't reliably perform programmatic surgical updates,
so we'll remove this option for now. We might add it back in later if it
becomes more practical to support it.
These run against a stub OAuth server implementation, verifying that we
are able to run an end-to-end login transaction for both the authorization
code and the password grant types.
This includes adding support for authorization code grants to our stub
OAuth server implementation; it previously supported only the password
grant type.
For unit testing in particular we can't launch a real browser for testing,
so this indirection is primarily to allow us to substitute a mock when
testing a command that can launch a browser.
This includes a simple mock implementation that expects to interact with
a running web server directly.
Because we're going to pass the credentials we obtain on to some
credentials store (either a credentials helper or a local file on disk)
we ought to disclose that first and give the user a chance to cancel out
and set up a different credentials storage mechanism first if desired.
This also includes the very beginnings of support for the owner password
grant type when running against app.terraform.io. This will be used only
temporarily at initial release to allow a faster initial release without
blocking on implementation of a full OAuth flow in Terraform Cloud.
The canonical location of the "template" provider is now in the hashicorp
namespace rather than the terraform-providers namespace, so the output
has changed to reflect that.
A more convenient interface to get a throwaway empty credentials source
for use in tests, which doesn't interact at all with the real CLI
configuration directory.
Previously `terraform console` would output an `init required` error if
it was run in a directory originally `init`ed with a `-plugin-dir`
specified.
Fixes#17826
This was a leftover from the migration of these types from the main
package, but we don't actually need or want this here because this
particular detail is still handled by the main package, and because the
cliconfig package must not depend on the command package in order to avoid
an import cycle.
This new implementation is not yet used, but should eventually replace the
technique of composing together various types from the svchost/auth
package, since our requirements are now complex enough that they're more
straightforward to express in direct code within a single type than as
a composition of the building blocks in the svchost/auth package.
Any command using meta.defaultFlagSet *might* occasionally exit before
the flag package's output got written. This caused flag error messages
to get lost. This PR discards the flag package output in favor of
directly returning the error to the end user.
Create the missing modules in the state when moving resources to a
module that doesn't yet exist. This allows for refactoring of
configuration into new modules, without having to create dummy resources
in the module before the "state mv" operations.
This is just a wholesale move of the CLI configuration types and functions
from the main package into its own package, leaving behind some type
aliases and wrappers for now to keep existing callers working.
This commit alone doesn't really achieve anything, but in future commits
we'll expand the functionality in this package.
* command/init: omit a warning if -backend-config is used with no backend
block
Terraform would silently accept - and swallow - `-backend-config` on the
CLI when there was no `backend` block. Since it is mostly expected to
override existing backend configuration, terraform
should omit a warning if there is no backend configuration to
override.
If the user intended to override the default (local) backend
configuration, they can first add a `backend` block to the `terraform` block to silence the warning (or just ignore it):
```hcl
terraform {
backend "local" {}
}
```
One of the show json command tests expected no error when presented with
an invalid configuration in a nested module. Modify the test created in
PR #21569 so that it can still verify there is no panic, but now expect
an error from init.
We always add an empty line when asking/checking the version. We should only do
that if there is a new version available. While this is purely cosmetic, it
reads better and is consistent with packer.
This includes a fix to make sure that an expression with a static string
index, like foo["bar"], will be parsed as a traversal rather than as a
dynamic index expression.
* command/show: marshal the state snapshot from the planfile
The planfile contains a state snapshot with certain resources updated
(outputs and datasources). Previously `terraform show -json PLANFILE`
was using the current state instead of the state inside the plan as
intended.
This caused an issue when the state included a terraform_remote_state
datasource. The datasource's state gets refreshed - and therefore
upgraded to the current state version - during plan, but that won't
persist to state until apply.
* update comment to reflect new return
In the unlikely event that a moduleCall has a nil config - for example,
if a nested module call includes a variable with a typo in an
attribute - continue gracefully.
* command/show -json: fix panic
afterUnknown should return only bools, not values.
* command/jsonplan: let's delete some redundant code!
the plan output was somewhat inconsistent with return values for
"after_unknown". This strives to fix that. If all "after" values are
known, return an empty object instead of iterating over values.
Also fixing some typos and general copypasta.
There is currently no way to unset -backend-config during init, since
not setting that option assumes the user will use the saved config.
Allow setting `-backend-config=""` to specify no overrides.
The omitUnknowns and unknownAsBool functions were previously trying hard
to preserve the same collection types in the output as they had in the
input, by attempting to keep everything matched up so that the results
would be valid.
Unfortunately, this turns out to be a harder problem than we originally
thought: it was possible for a collection value going in to produce
inconsistent element types out (and thus a panic) in the following
situations:
- when a collection with mixed known and unknown values was passed in
to omitUnknowns.
- when a collection of collections where the inner collections are a
mixture of empty and not empty in unknownAsNull.
The results of these functions are only used to marshal to JSON anyway,
and JSON serialization can't distinguish between the three sequence types
or the two mapping types, so in practice we can just standardize on
converting all sequences to tuple and all mappings to object here and not
change the resulting output at all, and then we don't have to worry about
making sure all of the inner types get preserved exactly.
A nice consequence of that relaxation is that we can now do what we
originally wanted to do with unknownAsBool, and omit map keys and
object attributes altogether if their values would've been false,
producing a much more compact result. This is easiest to do now when
there's only one known user of this JSON plan output, and we know that
user will treat both false and omitted as the same here.
The backend gets to "prepare" the configuration before Configure is
called, in order to validate the values and insert defaults. We don't
want to store this value in the "config state", because it will often
not match the raw config after it is prepared, forcing unecessary
backend migrations during init.
Since PrepareConfig is always called before Configure, we can store the
config value directly, and assume that it will be prepared in the same
manner each time.
If the backend config hashes match during init, and there are no new
backend override options, then we assume the existing config is OK.
Since init should be idempotent, we should be able to run init with no
options or config changes, and not effect the backends at all.
This includes a small fix to ensure the parser doesn't produce an invalid
body for block parsing syntax errors, and instead produces an incomplete
result that calling applications like Terraform can still analyze.
The problem here was affecting our version-constraint-sniffing code, which
intentionally tried to find a core version constraint even if there's a
syntax error so that it can report that a new version of Terraform is a
likely cause of the syntax error. It was working in most cases, unless
it was the "terraform" block itself that contained the error, because then
we'd try to analyze a broken hcl.Block with a nil body.
This includes a new test for "terraform init" that exercises this
recovery codepath.
There are a number of use cases that can require a user to select a workspace after initializing Terraform.
To make sure we cover all these use cases, we will always call the selectWorkspace method to verify a valid workspace is already selected or (if needed) offer to select one before moving on.
cty now guarantees that sets of primitive values will iterate in a
reasonable order. Previously it was the caller's responsibility to deal
with that, but we invariably neglected to do so, causing inconsistent
ordering. Since cty prioritizes consistent behavior over performance, it
now imposes its own sort on set elements as part of iterating over them so
that calling applications don't have to worry so much about it.
This change also causes cty to consistently push unknown and null values
in sets to the end of iteration, where before that was undefined. This
means that our diff output will now consistently list additions before
removals when showing sets, rather than the ordering being undefined as
before.
The ordering of known, non-null, non-primitive values is still not
contractually fixed but remains consistent for a particular version of
cty.
* internal/initwd: Allow deprecated relative module paths
In Terraform 0.11 we deprecated this form but didn't have any explicit
warning for it. Now we'll still accept it but generate a warning. In a
future major release we will drop this form altogether, since it is
ambiguous with registry module source addresses.
This codepath is covered by the command/e2etest suite.
* e2e: Skip copying .exists file, if present
We use this only in the "empty" test fixture in order to let git know that
the directory exists. We need to skip copying it so that we can test
"terraform init -from-module=...", which expects to find an empty
directory.
* command/e2etests: Re-enable and fix up the e2etest "acctests"
We disabled all of the tests that accessed remote services like the
Terraform Registry while they were being updated to support the new
protocols we now expect. With those services now in place, we can
re-enable these tests.
Some details of exactly what output we print, etc, have intentionally
changed since these tests were last updated.
* e2e: refactor for modern states and plans
* command/e2etest: re-enable e2etests and update for tf 0.12 compatibility
plugin/discovery: mkdirAll instead of mkdir when creating cache dir
Once you start reading from stdin, that is a blocking call that will
never finish. So when a context is canceled causing the input method to
return, the read will remain blocking in the running goroutine.
There isn't a real solution for it (e.g. its not possible to unblock the
read) so the only solution is to make the reader reusable.
When rendering the diff, the NoOp changes should come from the LCS
sequence, rather than the new sequence. The two indexes will not align
in many cases, adding the wrong new object or indexing out of bounds.
* command/state_list.go: fix bug loading user-defined state
If the user supplied a state path via the `-state` flag and terraform
was running in a workspace other than `default`, the state was not being
loaded properly. Fixes#19920
In study of existing providers we've found a pattern we werent previously
accounting for of using a nested block type to represent a group of
arguments that relate to a particular feature that is always enabled but
where it improves configuration readability to group all of its settings
together in a nested block.
The existing NestingSingle was not a good fit for this because it is
designed under the assumption that the presence or absence of the block
has some significance in enabling or disabling the relevant feature, and
so for these always-active cases we'd generate a misleading plan where
the settings for the feature appear totally absent, rather than showing
the default values that will be selected.
NestingGroup is, therefore, a slight variation of NestingSingle where
presence vs. absence of the block is not distinguishable (it's never null)
and instead its contents are treated as unset when the block is absent.
This then in turn causes any default values associated with the nested
arguments to be honored and displayed in the plan whenever the block is
not explicitly configured.
The current SDK cannot activate this mode, but that's okay because its
"legacy type system" opt-out flag allows it to force a block to be
processed in this way anyway. We're adding this now so that we can
introduce the feature in a future SDK without causing a breaking change
to the protocol, since the set of possible block nesting modes is not
extensible.
If the registry is unresponsive, you will now get an error
specific to this, rather than a misleading "provider unavailable" type
error. Also adds debug logging for when errors like this may occur
Due to these tests happening in the wrong order, removing an object from
the end of a sequence of objects would previously cause a bounds-check
panic.
Rather than a more severe rework of the logic here, for now we'll just
introduce an extra precondition to prevent the panic. The code that
follows already handles the case where there _is_ no new object (i.e. the
"old" object is being deleted) as long as we're able to pass through this
type-checking logic.
The new "JSON list of objects - removing item" test covers this problem
by rendering a diff for an object being removed from the end of a list
of objects within a JSON value.
Terraform Registry (and other registry implementations) can now return
an array of warnings with the versions response. These warnings are now
displayed to the user during a `terraform init`.
In earlier refactoring we updated these commands to support the new
address and state types, but attempted to partially retain the old-style
"StateFilter" abstraction that originally lived in the Terraform package,
even though that was no longer being used for any other functionality.
Unfortunately the adaptation of the existing filtering to the new types
wasn't exact and so these commands ended up having a few bugs that were
not covered by the existing tests.
Since the old StateFilter behavior was the source of various misbehavior
anyway, here it's removed altogether and replaced with some simpler
functions in the state_meta.go file that are tailored to the use-cases of
these sub-commands.
As well as just generally behaving more consistently with the other
parts of Terraform that use the new resource address types, this commit
fixes the following bugs:
- A resource address of aws_instance.foo would previously match an
resource of that type and name in any module, which disagreed with the
expected interpretation elsewhere of meaning a single resource in the
root module.
- The "terraform state mv" command was not supporting moves from a single
resource address to an indexed address and vice-versa, because the old
logic didn't need to make that distinction while they are two separate
address types in the new logic. Now we allow resources that do not have
count/for_each to be treated as if they are instances for the purposes
of this command, which is a better match for likely user intent and for
the old behavior.
Finally, we also clean up a little some of the usage output from these
commands, which hasn't been updated for some time and so had both some
stale information and some inaccurate terminology.
* command/providers schemas: return empty json object if config parses successfully but no providers found
* command/show (state): return an empty object if state is nil
* configs/configupgrade: detect possible relative module sources
If a module source appears to be a relative local path but does not have
a preceding ./, print a #TODO message for the user.
* internal/initwd: limit go-getter detectors to those supported by terraform
* internal/initwd: move isMaybeRelativeLocalPath check into getWithGoGetter
To avoid making two calls to getter.Detect, which potentially makes
non-trivial API calls, the "isMaybeRelativeLocalPath" check was moved to
a later step and a custom error type was added so user-friendly
diagnostics could be displayed in the event that a possible relative local
path was detected.
Our initial prototype of new-style diff rendering excluded this because
the old SDK has no support for this construct. However, we want to be able
to introduce this construct in the new SDK without breaking compatibility
with existing versions of Terraform Core, so we need to implement it now
so it's ready to be used once the SDK implements it.
The key associated with each block allows us to properly correlate the
items to recognize the difference between an in-place update of an
existing block and the addition/deletion of a block.
Our null-to-empty normalization was previously assuming these would always
be collection types, but that isn't true when a block contains something
dynamic since we must then use tuple or object types instead to properly
represent all of the individual element types.
We use cty a little differently when a nested list block contains a
dynamically-typed attribute: it appears as a tuple value instead of a
list value so that we can retain the individual types of each element.
Here we introduce a test for that case, but doing so required also making
the runTestCases function handle types in a stricter way so that it will
produce planned values that match how Terraform Core would do it,
including the necessary late-bound type information for the
dynamically-typed attribute.
Previously, these commands were not checking if the user specified a
`-plugin-dir` flag during `terraform init` and would therefor fail if
providers were not in one of the standard directories.
Fixes#20547
When the user aborts input, it may end up as an unknown value, which
needs to be converted to null for PrepareConfig.
Allow PrepareConfig to accept null config values in order to fill in
missing defaults.
When a planfile is supplied to the `terraform show -json` command, the
context that loads only included schemas for resources in the plan. We
found an edge case where removing a data source from the configuration
(though only if there are no managed resources from the same provider)
would cause jsonstate.Marshal to fail because the provider schema wasn't
in the plan context.
jsonplan.Marshal now takes two schemas, one for plan and one for state.
If the state schema is nil it will simply use the plan schemas.
* command/show: fixing bugs in modulecalls
jsonconfig and jsonplan both had subtle bugs with the logic for
marshaling module calls that only showed up when multiple modules were
referenced. This PR fixes those bugs and extends the existing tests to
include multiple modules.
* sort all the things, mostly for tests
* docs: update plan command documentation. Fixes#19235
* docs: added a missing reserved variable name. Fixes#19159.
* website: add note that resource names cannot start with a number
* website: add some notes to the 0.12 upgrade guide
We are now allowing the legacy SDK to opt out of the safety checks we try
to do after plan and apply, and so in such cases the before/after values
in planned changes may be inconsistent with our usual rules.
To avoid adding lots of extra complexity to the diff renderer to deal with
these situations, instead we'll normalize the handling of nested blocks
prior to using these values.
In the long run it'd be better to do this normalization at the source,
immediately after we receive an object from a provider using the opt-out,
but we're doing this at the outermost layer for now to avoid risking
unintended impacts on other Terraform Core components when we're just
about to enter the beta phase of the v0.12.0 release cycle.
This mirrors the change made for providers, so that default values can
be inserted into the config by the backend implementation. This is only
the interface and method name changes, it does not yet add any default
values.
We brought forward a new implementation of "terraform validate" that was
originally scheduled for a later release after finding that it would be
simpler than reworking the old implementation for new v0.12 assumptions,
but we didn't yet implement "terraform plan -validate-only" in spite of
it being mentioned in the updated docs for "terraform validate".
For now then, the documentation will make the weaker suggestion of running
"terraform plan" to validate a particular _run_ rather than a particular
_module_, which is the closest thing we have for now. At some point after
v0.12.0 we will evaluate whether a validate-only mode for "terraform plan"
(which could then run without configuring the providers at all) is needed.
A common new-user mistake is to place variable _declarations_ into .tfvars
files instead of variable _values_. To guide towards the correct approach
here, we add a specialized error message for that situation that includes
guidance on the distinction between declaring and setting values for
variables, and an example of what setting a value should look like.
* command/jsonconfig: provider config marshaling enhancements
This PR fixes a bug wherein the keys in "provider_config" were the
"addrs.ProviderConfig", and therefore being overwritten for each module,
instead of the intended "addrs.AbsProviderConfig".
We realized that there was still opportunity for ambiguity, for example
if a user made a provider alias that was the same name as a module, so
we opted to use the syntax `modulename:providername(.provideralias)`
* command/json*: fixed a bug where we were attempting to lookup schemas
with the provider name, instead of provider type.
* command/show: add "module_version" to "module_calls" in config portion
of `terraform show`.
Also extended the `terraform show -json` test to run `init` so we could
add examples with modules. This does _not_ test the "module_version"
yet, but it _did_ help expose a bug in jsonplan where modules were
duplicated. This is also fixed in this PR.
* command/jsonconfig: rename version to version_constraint and
resolved_source to source.
* command/jsonconfig: display module variables in config output
The tests have been updated to reflect this change.
* command/jsonconfig: properly handle variables with nil defaults
Now that we're actually verifying correct behavior of providers during
plan and apply, our mock providers need to behave like real providers,
properly propagating any configured values through the plan and into the
final state.
For most of these it was simpler to just switch over to using the newer
PlanResourceChangeFn mock interface, away from the legacy DiffFn approach,
because then we can just return the ProposedNewState verbatim because our
schema for these tests does not require any default values to be
populated.
* command/jsonplan:
- add variables to plan output
- print known planned values for resources
Previously, resource attribute values were only displayed if the values
were wholly known. Now we will filter the unknown values out of the
change and print the known values.
* command/jsonstate: added depends_on and tainted fields
* command/show: update tests to reflect added fields
We now require a provider to populate all of its defaults -- including
unknown value placeholders -- during PlanResourceChange. That means the
mock provider for testing "terraform show -json" must now manage the
population of the computed "id" attribute during plan.
To make this logic a little easier, we also change the ApplyResourceChange
implementation to fill in a non-null id, since that makes it easier for
the mock PlanResourceChange to recognize when it needs to populate that
default value during an update.
* command/jsonstate: do not hide SchemaVersion of '0'
* command/jsonconfig: module_calls should be a map
* command/jsonplan: include current terraform version in output
* command/jsonconfig: properly marshal expressions from a module call
Previously this was looking at the root module's variables, instead of
the child module variables, to build the module schema. This fixes that
bug.
* command/show: add support for -json output for state
* command/jsonconfig: do not marshal empty count/for each expressions
* command/jsonstate: continue gracefully if the terraform version is somehow missing from state
* command/jsonplan: sort resources by address
* command/show: extend test case to include resources with count
* command/json*: document resource ordering as consistent but undefined
* command/show: properly marshal attribute values to json
marshalAttributeValues in jsonstate and jsonplan packages was returning
a cty.Value, which json/encoding could not marshal. These functions now
convert those cty.Values into json.RawMessages.
* command/jsonplan: planned values should include resources that are not changing
* command/jsonplan: return a filtered list of proposed 'after' attributes
Previously, proposed 'after' attributes were not being shown if the
attributes were not WhollyKnown. jsonplan now iterates through all the
`after` attributes, omitting those which are not wholly known.
The same was roughly true for after_unknown, and that structure is now
correctly populated. In the future we may choose to filter the
after_unknown structure to _only_ display unknown attributes, instead of
all attributes.
* command/jsonconfig: use a unique key for providers so that aliased
providers don't get munged together
This now uses the same "provider" key from configs.Module, e.g.
`providername.provideralias`.
* command/jsonplan: unknownAsBool needs to iterate through objects that are not wholly known
* command/jsonplan: properly display actions as strings according to the RFC,
instead of a plans.Action string.
For example:
a plans.Action string DeleteThenCreate should be displayed as ["delete",
"create"]
Tests have been updated to reflect this.
* command/jsonplan: return "null" for unknown list items.
The length of a list could be meaningful on its own, so we will turn
unknowns into "null". The same is less likely true for maps and objects,
so we will continue to omit unknown values from those.
We missed this on the initial update pass because this was calling
directly into the module package API rather than going through the Meta
methods that we updated for the new config loader.
m.installModules here is the same method that "terraform init" is using
for this purpose, ensuring the two will behave the same way. This changes
the output a little compared to the old installer, but it still includes
the important information about where each module is coming from.
This possibility was lost in the rewrite to use HCL2, but it's used by
a number of external utilities and text editor integrations, so we'll
restore it here.
Using the stdin/stdout mode is generally preferable for text editor use
since it allows formatting of the in-memory buffer rather than directly
the file on disk, but for editors that don't have support for that sort of
tooling it can be convenient to just launch a single command and directly
modify the on-disk file.
Since the HCL formatter only works with tokens, it can in principle be
called with any input and produce some output. However, when given invalid
syntax it will tend to produce nonsensical results that may drastically
change the input file and be hard for the user to undo.
Since there's no strong reason to try to format an invalid or incomplete
file, we'll instead try parsing first and fail if parsing does not
complete successfully.
Since we talk directly to the HCL API here this is only a _syntax_ check,
and so it can be applied to files that are invalid in other ways as far
as Terraform is concerned, such as using unsupported top-level block types,
resource types that don't exist, etc.
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
* command/show: added test scaffold for json output
More test cases will be added once the basic shape of the tests is
validated.
- command/json* packages now sort resources by address, matching
behavior elsewhere
- using cmp in tests instead of reflect.DeepEqual for the diffs
- updating expected output in tests to match sorting
Martin Atkins