Fixes#4474, where lookup() calls fail out the entire interpolation when
the provided key value is not found in the map. This will allow using
coalesce() along with lookup() to greatly improve module flexibility.
Since the data resource lifecycle contains no steps to deal with tainted
instances, we must make sure that they never get created.
Doing this out in the command layer is not the best, but this is currently
the only layer that has enough information to make this decision and so
this simple solution was preferred over a more disruptive refactoring,
under the assumption that this taint functionality eventually gets
reworked in terms of StateFilter anyway.
This allows ${data.TYPE.NAME.FIELD} interpolation syntax at the
configuration level, though since there is no special handling of them
in the core package this currently just acts as an alias for
${TYPE.NAME.FIELD}.
This allows the config loader to read "data" blocks from the config and
turn them into DataSource objects.
This just reads the data from the config file. It doesn't validate the
data nor do anything useful with it.
Previously resources were assumed to always support the full set of
create, read, update and delete operations, and Terraform's resource
management lifecycle.
Data sources introduce a new kind of resource that only supports the
"read" operation. To support this, a new "Mode" field is added to
the Resource concept within the config layer, which can be set to
ManagedResourceMode (to indicate the only mode previously possible) or
DataResourceMode (to indicate that only "read" is supported).
To support both managed and data resources in the tests, the
stringification of resources in config_string.go is adjusted slightly
to use the Id() method rather than the unusual type[name] serialization
from before, causing a simple mechanical adjustment to the loader tests'
expected result strings.
This commit adds support for native list variables and outputs, building
up on the previous change to state. Interpolation functions now return
native lists in preference to StringList.
List variables are defined like this:
variable "test" {
# This can also be inferred
type = "list"
default = ["Hello", "World"]
}
output "test_out" {
value = "${var.a_list}"
}
This results in the following state:
```
...
"outputs": {
"test_out": [
"hello",
"world"
]
},
...
```
And the result of terraform output is as follows:
```
$ terraform output
test_out = [
hello
world
]
```
Using the output name, an xargs-friendly representation is output:
```
$ terraform output test_out
hello
world
```
The output command also supports indexing into the list (with
appropriate range checking and no wrapping):
```
$ terraform output test_out 1
world
```
Along with maps, list outputs from one module may be passed as variables
into another, removing the need for the `join(",", var.list_as_string)`
and `split(",", var.list_as_string)` which was previously necessary in
Terraform configuration.
This commit also updates the tests and implementations of built-in
interpolation functions to take and return native lists where
appropriate.
A backwards compatibility note: previously the concat interpolation
function was capable of concatenating either strings or lists. The
strings use case was deprectated a long time ago but still remained.
Because we cannot return `ast.TypeAny` from an interpolation function,
this use case is no longer supported for strings - `concat` is only
capable of concatenating lists. This should not be a huge issue - the
type checker picks up incorrect parameters, and the native HIL string
concatenation - or the `join` function - can be used to replicate the
missing behaviour.
This changes the representation of maps in the interpolator from the
dotted flatmap form of a string variable named "var.variablename.key"
per map element to use native HIL maps instead.
This involves porting some of the interpolation functions in order to
keep the tests green, and adding support for map outputs.
There is one backwards incompatibility: as a result of an implementation
detail of maps, one could access an indexed map variable using the
syntax "${var.variablename.key}".
This is no longer possible - instead HIL native syntax -
"${var.variablename["key"]}" must be used. This was previously
documented, (though not heavily used) so it must be noted as a backward
compatibility issue for Terraform 0.7.
* core: Add support for marking outputs as sensitive
This commit allows an output to be marked "sensitive", in which case the
value is redacted in the post-refresh and post-apply list of outputs.
For example, the configuration:
```
variable "input" {
default = "Hello world"
}
output "notsensitive" {
value = "${var.input}"
}
output "sensitive" {
sensitive = true
value = "${var.input}"
}
```
Would result in the output:
```
terraform apply
Apply complete! Resources: 0 added, 0 changed, 0 destroyed.
Outputs:
notsensitive = Hello world
sensitive = <sensitive>
```
The `terraform output` command continues to display the value as before.
Limitations: Note that sensitivity is not tracked internally, so if the
output is interpolated in another module into a resource, the value will
be displayed. The value is still present in the state.
hil.Eval() now returns (hil.EvaluationResult, error) instead of (value,
type, error). This commit updates the call sites, but retains all
previous behaviour. Tests are also updated.
These tests demonstrates a problem where the types to a module input are
not checked. For example, if a module - inner - defines a variable
"should_be_a_map" as a map, or with a default variable of map, we do not
fail if the user sets the variable value in the outer module to a string
value. This is also a problem in nested modules.
The implementation changes add a type checking step into the graph
evaluation process to ensure invalid types are not passed.
Fixes an interpolation race that was occurring when a tainted destroy
node and a primary destroy node both tried to interpolate a computed
count in their config. Since they were sharing a pointer to the _same_
config, depending on how the race played out one of them could catch the
config uninterpolated and would then throw a syntax error.
The `Copy()` tree implemented for this fix can probably be used
elsewhere - basically we should copy the config whenever we drop nodes
into the graph - but for now I'm just applying it to the place that
fixes this bug.
Fixes#4982 - Includes a test covering that race condition.
This function returns -1 for negative numbers, 0 for 0 and 1 for positive numbers.
Useful when you need to set a value for the first resource and a different value for the rest of the resources.
Example: `${element(split(",", var.r53_failover_policy), signum(count.index))}`
If a variable type which is invalid (e.g. "stringg") is declared, we now
include the invalid type description in the error message to make it
easier to track down the source of the error in the source file.
This commit adds support for declaring variable types in Terraform
configuration. Historically, the type has been inferred from the default
value, defaulting to string if no default was supplied. This has caused
users to devise workarounds if they wanted to declare a map but provide
values from a .tfvars file (for example).
The new syntax adds the "type" key to variable blocks:
```
variable "i_am_a_string" {
type = "string"
}
variable "i_am_a_map" {
type = "map"
}
```
This commit does _not_ extend the type system to include bools, integers
or floats - the only two types available are maps and strings.
Validation is performed if a default value is provided in order to
ensure that the default value type matches the declared type.
In the case that a type is not declared, the old logic is used for
determining the type. This allows backwards compatiblity with previous
Terraform configuration.
The render code path in `template_file` was doing unsynchronized access
to a shared mapping of functions in `config.Func`.
This caused a race condition that was most often triggered when a
`template_file` had a `count` of more than one, and expressed itself as
a panic in the plugin followed by a cascade of "unexpected EOF" errors
through the plugin system.
Here, we simply turn the FuncMap from shared state into a generated
value, which avoids the race. We do more re-initialization of the data
structure, but the performance implications are minimal, and we can
always revisit with a perf pass later now that the race is fixed.
This may be brittle as it makes use of .gitattributes to override the
autocrlf setting in order to have an input file with Windows line
endings across multiple platforms.
This was never intended to be valid syntax, but it worked in the old HCL
parser, and we've found a decent number of examples of it in the wild.
Fixed in https://github.com/hashicorp/hcl/pull/62 and we'll keep this
test in Terraform to cover the behavior.
Building on the work of #3846, deprecate `filename` in favor of a
`template` attribute that accepts file contents instead of a path.
Required a bit of work in the interpolation code to prevent Terraform
from assuming that template interpolations were resource variables that
needed to be resolved. Leaving them as "Unknown Variables" prevents
interpolation from happening early and lets the `template_file` resource
do its thing.
This test reproduces the issue which is likely the root cause of #3840.
Test is currently failing with an "illegal character" message
corresponding with the location of the heredoc, which is also seen in
various acceptance tests for providers.
It has improvements to error messaging that we want.
We'll use this occasion begin developing / building with Go 1.5 from
here on out. Build times will be slower, but we have core development
plans that will help mitigate that.
/cc @hashicorp/terraform-committers
These new functions allow Terraform to be used for network address space
planning tasks, and make it easier to produce reusable modules that
contain or depend on network infrastructure.
For example:
- cidrsubnet allows an aws_subnet to derive its
CIDR prefix from its parent aws_vpc.
- cidrhost allows a fixed IP address for a resource to be assigned within
an address range defined elsewhere.
- cidrnetmask provides the dotted-decimal form of a prefix length that is
accepted by some systems such as routing tables and static network
interface configuration files.
The bulk of the work here is done by an external library I authored called
go-cidr. It is MIT licensed and was implemented primarily for the purpose
of using it within Terraform. It has its own unit tests and so the unit
tests within this change focus on simple success cases and on the correct
handling of the various error cases.
There isn't any precedent for abbreviating words in the interpolation
function names, and it may not be clear to all users what "enc" and "dec"
are short for, so instead we'll prefer to spell out the whole words for
improved readability.
It seems there are 4 locations left that use the `helper/multierror`
package, where the rest is TF settled on the `hashicorp/go-multierror`
package.
Functionally this doesn’t change anything, so I suggest to delete the
builtin version as it can only cause confusion (both packages have the
same name, but are still different types according to Go’s type system.
Had to handle a lot of implicit leaning on a few properties of the old
representation:
* Old representation allowed plain strings to be treated as lists
without problem (i.e. shoved into strings.Split), now strings need to
be checked whether they are a list before they are treated as one
(i.e. shoved into StringList(s).Slice()).
* Tested behavior of 0 and 1 length lists in formatlist() was a side
effect of the representation. Needs to be special cased now to
maintain the behavior.
* Found a pretty old context test failure that was wrong in several
different ways. It's covered by TestContext2Apply_multiVar so I
removed it.
This is the initial pure "all tests passing without a diff" stage. The
plan is to change the internal representation of StringList to include a
suffix delimiter, which will allow us to recognize empty and
single-element lists.
Without this 12 line function it’s impossible to use any of the
Terraform code without the need for having the files on disk. As more
and more people are using (parts of) Terraform in other software, this
seems to be a very welcome addition. It has no negative impact on
Terraform itself whatsoever (the function is never called), but it
opens up a lot of other use cases.
Next to the single new function, I renamed the existing function (and
related tests) to better reflect what the function does. So now there
is a `LoadDir` function which calls `LoadFile` for each file, which
kind of made sense to me, especially when now adding a `LoadJSON`
function as well.
But of course if the rename is a problem, I can revert that part as
it’s not related to the added `LoadJSON` function.
Thanks!
formatlist distributes formatting over lists.
See the docs for details.
As a colleague commented:
"It happens all the time that we want a set of
outputs, but in a slightly different way than
just simple joining or concatting."
formatlist (combined with join)
makes it easy to satisfy those needs.
Adds an "alias" field to the provider which allows creating multiple instances
of a provider under different names. This provides support for configurations
such as multiple AWS providers for different regions. In each resource, the
provider can be set with the "provider" field.
(thanks to Cisco Cloud for their support)
When the `prevent_destroy` flag is set on a resource, any plan that
would destroy that resource instead returns an error. This has the
effect of preventing the resource from being unexpectedly destroyed by
Terraform until the flag is removed from the config.
HgGetter tests failed on windows/amd64 using Mercurial version 3.2.4:
--- FAIL: TestHgGetter (0.11s)
get_hg_test.go:35: err: C:\Program Files\Mercurial\hg.exe exited with 255: abort: file:// URLs can only refer to localhost
--- FAIL: TestHgGetter_branch (0.11s)
get_hg_test.go:62: err: C:\Program Files\Mercurial\hg.exe exited with 255: abort: file:// URLs can only refer to localhost
FAIL
FAIL github.com/hashicorp/terraform/config/module 5.615s
This commit fixes the failures by adjusting the file:// URL to a form that
Mercurial expects.
Only adjust the URL Scheme when parsing drive letter file paths on
Windows, don't add a file scheme prefix.
FileDetector is responsible for adding the file scheme prefix.
Absolute file paths were not correctly detected by module.Detect
when using url.Parse to parse the source URL. Wrap the detection
with urlParse to properly handle file path detections on Windows.
Fixes command test failures on Windows.
When parsing URLs on Windows, assume it is a drive letter path
if the second element is a ':' character. Format the drive letter
path as a "file:///"-path prior to parsing the URL.
Fixes test failures of the following form in command on Windows:
=== RUN TestApply_plan
--- FAIL: TestApply_plan (0.00s)
apply_test.go:379: bad: 1
module download not supported for scheme 'c'
Using url.Parse to parse an absolute file path on Windows yields
a URL type where the Path element is prefixed by a slash.
For example, parsing "file:///C:/Users/user" gives a URL type
with Path:"/C:/Users/user".
According to golang.org/issue/6027, the parsing is correct as is.
The leading slash on the Path must be eliminated before any file
operations.
This commit introduces a urlParse function which wraps the url.Parse
functionality and removes the leading slash in Path for absolute file
paths on Windows.
Fixes config/module test failures on Windows.
Specify laddr on the form host:port in the call to net.Listen as
documented for net.Dial, see godoc.org/net#Dial
Fixes the following test failures on Windows:
> go test -run=TestHttpGetter
--- FAIL: TestHttpGetter_header (0.00s)
get_http_test.go:31: err: Get http://[::]:52101/header?terraform-get=1: dial tcp [::]:52101: ConnectEx tcp: The requested address is not valid in its context.
--- FAIL: TestHttpGetter_meta (0.00s)
get_http_test.go:55: err: Get http://[::]:52103/meta?terraform-get=1: dial tcp [::]:52103: ConnectEx tcp: The requested address is not valid in its context.
--- FAIL: TestHttpGetter_metaSubdir (0.00s)
get_http_test.go:79: err: Get http://[::]:52105/meta-subdir?terraform-get=1: dial tcp [::]:52105: ConnectEx tcp: The requested address is not valid in its context.
FAIL
exit status 1
FAIL github.com/hashicorp/terraform/config/module 0.054s
"/foo" is not an absolute path on Windows. Adjust the FileDetector
tests to take that into account when verifying the results.
Fixes FileDetector test failures on Windows.
Fixes the following vet reports:
config/lang/check_types.go:98: arg n for printf verb %d of wrong type: *github.com/hashicorp/terraform/config/lang/ast.Concat
config/lang/lex.go:80: arg x.mode for printf verb %s of wrong type: lang.parserMode
David Adams