When the user aborts input, it may end up as an unknown value, which
needs to be converted to null for PrepareConfig.
Allow PrepareConfig to accept null config values in order to fill in
missing defaults.
This mirrors the change made for providers, so that default values can
be inserted into the config by the backend implementation. This is only
the interface and method name changes, it does not yet add any default
values.
If set elements are computed, we can't be certain that they are actually
equal. Catch identical computed set hashes when they are added to the
set, and alter the set key slightly to keep the set counts correct.
In previous versions the interpolation string would be included in the
set, and different string values would cause the set to hash
differently, so this is change is only activated for the new protocol.
Sets rely on diffs being complete for all elements, even when they are
unchanged. When encountering a DiffSuppressFunc inside a set the diffs
were being dropped entirely, possible causing set elements to be lost.
The new decoder is more precise, and unpacks the timeout block into a
single map, which ResourceTimeout.ConfigDecode was updated to handle.
We however still need to work with legacy versions of terraform, with
the old decoder.
Historically helper/schema did not support non-primitive map attributes
because they cannot be represented unambiguously in flatmap. When we
initially implemented CoreConfigSchema here we mapped that situation to
a nested block of mode NestingMap, even though that'd never worked until
now, assuming that it'd be harmless because providers wouldn't be using
it.
It turns out that some providers are, in fact, incorrectly populating
a TypeMap schema with Elem: &schema.Resource, apparently under the false
assumption that it would constrain the keys allowed in the map. In
practice, helper/schema has just been ignoring this and treating such
attributes as map of string. (#20076)
In order to preserve the behavior of these existing incorrectly-specified
attribute definitions, here we mimic the helper/schema behavior by
presenting as an attribute of type map(string).
These attributes have also been shown in some documentation as nested
blocks (with no equals sign), so that'll need to be fixed in user
configurations as they upgrade to Terraform 0.12. However, the existing
upgrade tool rules will take care of that as a natural consequence of the
name being indicated as an attribute in the schema, rather than as a block
type.
This fixes#20076.
With the introduction of explicit "null" in 0.12 it's possible for a value
that is unknown during plan to become a known null during apply, so we
need to slightly weaken our validation rules to accommodate that, in
particular skipping the validation of conflicting attributes if the result
could potentially be valid after the unknown values become known.
This change is in the codepath that is common to both 0.12 and 0.11
callers, but that's safe because 0.11 re-runs validation during the apply
step and so will still catch problems here, albeit in the apply step
rather than in the plan step, thus matching the 0.12 behavior. This new
behavior is a superset of the old in the sense that everything that was
valid before is still valid.
The implementation here also causes us to skip all other validation for
an attribute whose value is unknown. Most of the downstream validation
functions handle this directly anyway, but again this doesn't add any new
failure cases, and should clean up some of the rough edges we've seen with
unknown values in 0.11 once people upgrade to 0.12-compatible providers.
Any issues we now short-circuit during planning will still be caught
during apply.
While working on this I found that the existing "Not a list" test was not
actually testing the correct behavior, so this also includes a tweak to
that to ensure that it really is checking the "should be a list" path
rather than the "cannot be set" codepath it was inadvertently testing
before.
The added test in this commit, without the fix, will make d.Set return
the following error:
`Invalid address to set: []string{"ports", "0", "set"}`
This was due to the fact that setSet in feild_writer_map tried to
convert a slice into a set by creating a temp set schema and calling
writeField on that with the address(`[]string{"ports", "0", "set"}"` in
this case). However the temp schema was only for the set and not the
whole schema as seen in the address so, it should have been `[]string{"set"}"`
so it would align with the schema.
This commits adds another variable there(tempAddr) which will only
contain the last entry of the address that would be the set key, which
would match the created schema
This commit potentially fixes the problem described in #16331
The rest of Terraform is still using uint64 for this in various spots, but
we'll update that gradually later. We use int64 here because that matches
what's used in our protobuf definition, and unsigned integers are not
portable across all of the protobuf target languages anyway.
Since the SDK's schema system conflates attributes and nested blocks, it's
possible to state some nonsensical schema situations such as:
- A nested block is both optional but has MinItems > 0
- A nested block is entirely computed but has MinItems or MaxItems set
Both of these weird situations are handled here in the same way that the
existing helper/schema validation code would've handled them: by
effectively disabling the MinItems/MaxItems checks where they would've
been ignored before.
the MinItems/MaxItems
The SDK has a mechanism that effectively makes it possible to declare an
attribute as being _conditionally_ required, which is not a concept that
Terraform Core is aware of.
Since this mechanism is in practice only used for a small UX improvement
in prompting for these values interactively when the environment variable
is not set, we avoid here introducing all of this complexity into the
plugin protocol by just having the provider selectively modify its schema
if it detects that such an attribute might be set dynamically.
This then prevents Terraform Core from validating the presence of the
argument or prompting for a new value for it, allowing the null value to
pass through into the provider so that the default value can be generated
again dynamically.
This is a kinda-kludgey solution which we're accepting here because the
alternative would be a much-more-complex two-pass decode operation within
Core itself, and that doesn't seem worth it.
This fixes#19139.
This makes sure the diff is generated with the matching set ids from
helper/schema.
Update the tests to add ID fields to the state, which will exists in
practice, since any state traversing through the shims will have the ID
inserted.
Resource timeouts were a separate config block, but did not exist in the
resource schema. Insert any defined timeouts when generating the
configshema.Block so that the fields can be accepted and validated by
core.
Use the new SimpleDiff method of the provider so that the diff isn't
altered by ForceNew attributes.
Always set an "id" as RequiresReplace so core knows an instance will be
replaced, even if all ForceNew attributes are filtered out due to
ignore_changes.
Terraform now handles any actual "diffing" of resource, and the existing
Diff functions are only used to shim the schema.Provider to the new
methods. Since terraform is handling what used to be the Diff, the
provider now should not modify the diff based on RequiresNew due to it
interfering with the ignore_changes handling.
The "id" field is assumed to always exist, and must have a valid value.
Set "id" to unknown when planning new resource changes to indicate that
it will be computed.
In order to not require state migrations to be supported in both
MigrateState and StateUpgraders, the legacy provider codepath needs to
handle the StateUpgraders transparently during Refresh.
This adds some of the required shim functions to the schema package.
While this further bloats the already huge package, adding the helpers
here was significantly less disruptive than refactoring types into
separate packages to prevent import cycles.
The majority of tests here are directly adapted from existing schema
tests to provide as many known good values to the shims as possible.
It turns out that state upgrades need to be handled differently since
providers are going to be backwards compatible. This means that new
state upgrades may still be stored in the flatmap format when used wih
terraform 0.11. Because we can't account for the specific version which
could produce a legacy state, all future state upgrades need to record
the schema types for decoding.
Rather than defining a single Upgrade function for states, we now have a
list of functions, each of which handle upgrading a specific version to
the next. In practice this isn't much different from the way many
resources implement upgrades themselves, with a separate function for
each version dispatched from the MigrateState function. The only added
burden is the recording of the schema type, and we intend to supply
tools and helper function to prevent the need to copy the entire
existing schema in all cases.
This is the provider-side UpgradeState implementation for a particular
resource. This new function will be called to upgrade a saved state with
an old schema version to the current schema.
UpgradeState also requires a record of the last schema and version that
could have been stored as a flatmapped state. If the stored state is in
the legacy flatmap format, this will allow the provider to properly
decode the flatmapped state into the expected structure for the new json
encoded state. If the stored state's version is below that of the
LegacySchema.Version value, it will first be processed by the legacy
MigrateState function.
The update protocol shims will also check for this this, but eventually
"id" will only be a normal attribute, and we shouldn't have to special
case this.
When converting a legacy schemaMap to a configschema, we need to add
"id" as a required attribute to top-level resources if it's not
declared.
The "id" field will be required to interoperate with the legacy helper
schema, since the presence of an id was used to indicate the existence
of a resource.
The "config" package is no longer used and will be removed as part
of the 0.12 release cleanup. Since configschema is part of the
"new world" of configuration modelling, it makes more sense for
it to live as a subdirectory of the newer "configs" package.
James Bardin