Add the Version and Providers fields to the module config.
Add ProviderConfig.Scope, which will be used to record the original
path of a ProviderConfig for interpolation.
This early validation uses interpolation of a placeholder value to achieve
some "best effort" validation of the validity of the count attribute.
Since HCL2-specified resources can't be interpolated using the main
interpolator, here we branch and use the HCL2 API to do a
largely-equivalent (though slightly less accurate) check.
In the long run we don't really need this extra check at all, since the
validation walk does a more accurate version of the same thing. However,
we're preserving this for now in the interests of minimizing the amount
of change for the main codepath during our experiment.
Use the new HCL2 config loader when the opt-in comment #terraform:hcl2 is
present in a .tf file.
For now this is disabled for "normal" builds and enabled only if
explicitly configured via a linker flag during build. This is because it's
not yet in a good state to be released: the HCL2 loader produces RawConfig
objects that the validator and interpolator can't yet deal with, and so
using HCL2 for anything non-trivial currently causes Terraform to crash
in real use.
This loader uses the HCL2 parser and decoder to process a config file,
and then transforms the result into the same shape as would be produced
by the HCL config loader.
To avoid making changes to the existing config structures (which are
depended on across much of the codebase) we first decode into a set of
HCL2-tailored structs and then process them into the public-facing structs
that a loader is expected to return. This is a compromise to keep the
config package API broadly unchanged for now. Once we're ready to remove
the old HCL loader (which implies that we're ready to support HCL2
natively elsewhere in the codebase) we will be able to simplify this
quite considerably.
Due to some mismatches of abstraction between HCL/HIL and HCL2, some
shimming is required to get the required result.
There is some additional, early validation on the "count" meta-argument
that verifies that only suitable variable types are used, and adding local
values to this whitelist was missed in the initial implementation.
It seems that this somehow got lost in the commit/rebase shuffle and
wasn't caught by the tests that _did_ make it because they were all using
just one file.
As a result of this bug, locals would fail to work correctly in any
configuration with more than one .tf file.
Along with restoring the append/merge behavior, this also reworks some of
the tests to exercise the multi-file case as better insurance against
regressions of this sort in future.
This fixes#15969.
We added the description field in 0.9 but we never parsed it because we
didn't have a use for it. As we prepare to use this field, let's start
parsing it out
Previously we were using the "semver" library to parse version
constraints, but we switched over to go-version and encapsulated it
inside our own plugin/discovery package to reduce dependency sprawl in
the code.
This particular situation was missed when updating references to the new
path, which meant that our validation code disagreed with the rest of
the code about what is considered a valid version constraint string.
By using the correct function, we ensure that we catch early any invalid
versions.
In future we will support version constraints on providers, so we're
reserving this attribute name that is currently not used by any builtin
providers.
For now using this will produce an error, since the rest of Terraform
(outside of the config parser) doesn't currently have this notion and we
don't want people to start trying to use it until its behavior is fully
defined and implemented.
It may be used by third-party providers, so this is a breaking change
worth warning about in CHANGELOG but one whose impact should be small.
Any third-party providers using this name should migrate to using a new
attribute name instead moving forward.
Prior to Terraform 0.7, lists in Terraform were just a shallow abstraction
on top of strings with a magic delimiter between items. Wrapping a single
string in brackets in the configuration was Terraform's prompt that it
needed to split the string on that delimiter during interpolation.
In 0.7, when first-class lists were added, this convention was preserved
by flattening lists-of-lists by one level when they were encountered in
configuration. However, there was an oversight in that change where it
did not correctly handle the case where the inner list was unknown.
In #14135 we removed some code that was flattening partially-unknown lists
into fully-unknown (untyped) values. This inadvertently exposed the missed
case from the previous paragraph, causing issues for list-wrapped splat
expressions with unknown members. While this worked fine for resources,
due to some fixup done inside helper/schema, this did not work for other
interpolation contexts such as module blocks.
Various attempts to fix this up and restore the flattening behavior
selectively were unsuccessful, due to a proliferation of assumptions all
over the core code that would be too risky to change just to fix this bug.
This change, then, takes the different approach of removing the
requirement that splats be presented inside list brackets. This
requirement didn't make much sense anymore anyway, since no other
list-returning expression had this constraint and so the rest of Terraform
was already successfully dealing with both cases.
This leaves us with two different scenarios:
- For resource arguments, existing normalization code in helper/schema
does its own flattening that preserves compatibility with the common
practice of using bracketed splats. This change proves this with a test
within the "test" provider that exercises the whole Terraform core and
helper/schema stack that assigns bracketed splats to list and set
attributes.
- For arguments in other blocks, such as in module callsites, the
interpolator's own flattening behavior applies to known lists,
preserving compatibility with configurations from before
partially-computed splats were possible, but those wishing to use
partially-computed splats are required to drop the surrounding brackets.
This is less concerning because this scenario was introduced only in
0.9.5, so the scope for breakage is limited to those who adopted this
new feature quickly after upgrading.
As of this commit, the recommendation is to stop using brackets around
splats but the old form continues to be supported for backward
compatibility. In a future _major_ version of Terraform we will probably
phase out this legacy form to improve consistency, but for now both
forms are acceptable at the expense of some (pre-existing) weird behavior
when _actual_ lists-of-lists are used.
This addresses #14521 by officially adopting the suggested workaround of
dropping the brackets around the splat. However, it doesn't yet allow
passing of a partially-unknown list between modules: that still violates
assumptions in Terraform's core, so for the moment partially-unknown lists
work only within a _single_ interpolation expression, and cannot be
passed around between expressions. Until more holistic work is done to
improve Terraform's type handling, passing a partially-unknown splat
through to a module will result in a fully-unknown list emerging on
the other side, just as was the case before #14135; this change just
addresses the fact that this was failing with an error in 0.9.5.
We've been incorrectly validating (or not validating at all) the
requirement that certain blocks be followed by a name string, to prohibit
e.g. this:
variable {}
and:
variable = ""
Before this change we were catching this for most constructs only if
there were no _valid_ blocks of the same name in the same file. For
modules in particular, we were not catching this at all.
Now we detect this for all kinds of block (resources had a pre-existing
check, so aren't touched here) and produce a different error message
depending on which of the above incorrect forms are used.
This fixes#13575.
The variable validator assumes that any AST node it gets from an
interpolation walk is an indicator of an interpolation. Unfortunately,
back in f223be15 we changed the interpolation walker to emit a LiteralNode
as a way to signal that the result is a literal but not identical to the
input due to escapes.
The existence of this issue suggests a bit of a design smell in that the
interpolation walker interface at first glance appears to skip over all
literals, but it actually emits them in this one situation. In the long
run we should perhaps think about whether the abstraction is right here,
but this is a shallow, tactical change that fixes#13001.
When configuration is read out of JSON, HCL assumes that empty levels of
objects can be flattened, but this removes too much to decode into a
config.Terraform struct.
Reconstruct the appropriate AST to decode the config struct.
Fixes#11800
Type check the value of count so we don't panic on the conversion.
I wondered "why didn't we do this before?" There is no excuse for NOT
doing it at all but the reasoning was beacuse prior to the list/map work
in 0.7, the value couldn't be anything other than a string since any
primitive can turn into a string.
Regardless, we should've always done this.
Fixes#10597
This disallows any names for variables, modules, etc. starting with
ints. This causes parse errors with the new HIL parser and actually
causes long term ambiguities if we allow this.
I've also updated the upgrade guide to note this as a backwards
compatibility and how people can fix this going forward.
We allow variables to have descriptions specified, as additional context
for a module user as to what should be provided for a given variable.
We previously lacked a similar mechanism for outputs. Since they too are
part of a module's public interface, it makes sense to be able to add
descriptions for these for symmetry's sake.
This change makes a "description" attribute valid within an "output"
configuration block and stores it within the configuration data structure,
but doesn't yet do anything further with it. For now this is useful only
for third-party tools that might parse a module's config to generate
user documentation; later we could expose the descriptions as part of
the "apply" output, but that is left for a separate change.
Fixes#7846
This changes from using the HCL decoder to manually decoding the
`variable` blocks within the configuration. This gives us a lot more
power to catch validation errors. This PR retains the same tests and
fixes one additional issue (covered by a test) in the case where a
variable has no named assigned.
This is the limitation of all lifecycle attributes currently. Right now,
interpolations are allowed through and the user ends up thinking it
should work. We should give an error.
In the future it should be possible to support some minimal set of
interpolations (static variables, data sources even perhaps) but for now
let's validate that this doesn't work.
When a resource has only a single key set, the HCL parser treats that
key as part of the overall set of object keys. This isn't valid since
we expect resources to have exactly two keys. In this scenario, we have
to "unwrap" the keys back into a set of objects.
Dot indexing worked in the "regexps and strings" world of 0.6.x, but it
no longer works on the 0.7 series w/ proper List / Map types.
There is plenty of dot-indexed config out in the wild, so we need to do
what we can to point users to the new syntax.
Here is one place we can do it for user variables (`var.somemap`). We'll
also need to address Resource Variables and Module Variables in a
separate PR.
This fixes the panic in #7103 - a proper error message is now returned.
This commit changes config parsing from weak decoding lists and maps
into []string and map[string]string respectively to decode into
[]interface{} and map[string]interface{} respectively. This is in order
to take advantage of the work integrated in #7082 to defeat the backward
compatibility features of the mapstructure library.
Test coverage of loading empty variables and validating their default
types against expectation.
This allows the config loader to read "data" blocks from the config and
turn them into DataSource objects.
This just reads the data from the config file. It doesn't validate the
data nor do anything useful with it.
James Bardin