This is a genre of invalid output expression that we've seen quite
commonly while testing with 0.11.0-rc1, so we'll call it out specifically
in the upgrade guide and suggest how to fix it.
The differences between the implicit and explicit modes of passing
provider configurations between modules are significant enough to warrant
giving these approaches different names and describing them separately.
This also includes documentation of the current limitation discussed in
#16612, where explicit passing requires a proxy configuration block even
for a _default_ provider configuration, because that limitation is being
accepted for the 0.11.0 release to limit scope.
We are recommending that as of 0.11 all provider configurations be placed
in the root module and, where necessary, be explicitly passed down via
a providers map to customize which configurations are seen by each
child module.
This new section attempts to guide users through such refactoring in the
common case where a child module defines its own provider configuration
based on a value passed in an input variable, and then uses that as
some context to link to the more detailed docs to help those who have
more complex configurations.
The initial pass of this section had some remaining ambiguities, so this
is a second revision that attempts to use terminology more consistently
and to not some additional behaviors that were not described in the
initial version.
We've historically been somewhat inconsistent in how we refer to the
type of object defined by "variable" blocks in configuration. Parts of
our documentation refer to them as "input variables" or just "variables",
while our implementation refers to them as "user variables".
Since Terraform Registry is now also referring to these as "Inputs", here
we standardize on "Input Variable" as the fully-qualified name for this
concept, with "variable" being a shorthand for this where context is
obvious. Outside of this context, anything that can be referred to in
an interpolation expression is generically known as a "variable", with
Input Variables being just one kind, specified by the "var." prefix.
While this terminology shift is not critical yet, it will become more
important as we start to document the new version of the configuration
language so we can use the generic meaning of "variable" there.
The bulk of the text on this page hasn't been revised for some time and
so parts of it were using non-idiomatic terminology or not defining terms
at all.
The main goal of this revision is to standardize on the following terms:
- "provider configuration" refers to a specific provider block in config,
as a distinct idea from the provider _itself_, which is a singleton.
- "Default" vs. "additional" provider configurations, distinguishing
those without and with "alias" arguments respectively. These are named
here so that we can use this terminology to describe the different
behaviors of each for the purposes of provider inheritance between
modules.
The "terraform" provider was previously split out into its own repository,
but that turned out to be a mistake due to how tightly it depends on
aspects of Terraform Core.
Here we prepare to bring it back into the core repository by reorganizing
the directory layout to conform with what's expected there.
This allows the user to customize the location where Terraform stores
the files normally placed in the ".terraform" subdirectory, if e.g. the
current working directory is not writable.
This is a significant rework of the Modules getting started guide to be
in terms of the Consul module available via the Terraform Registry. This
allows us to introduce the registry as part of the tutorial, and also
gives us some auto-generated documentation to link to as context for
the tutorial.
This new module is designed pretty differently than the one we formerly
used, and in particular it doesn't expose any server addresses for the
created Consul cluster -- due to using an auto-scaling group -- and thus
we're forced to use the (arguably-less-compelling) auto-scaling group name
for our output example.
Now includes more complete information on usage of private registries and
updates the module registry API documentation to include the new
version-enumeration endpoint along with describing Terraform's discovery
protocol.
The modules mechanism has changed quite a bit for version 0.11 and so
although simple usage remains broadly compatible there are some
significant changes in the behavior of more complex modules.
Since large parts of this were rewritten anyway, I also took the
opportunity to do some copy-editing to make the prose on this page more
consistent with our usual editorial voice and to wrap the long
lines.
In the 0.10 release we added an opt-in mode where Terraform would prompt
interactively for confirmation during apply. We made this opt-in to give
those who wrap Terraform in automation some time to update their scripts
to explicitly opt out of this behavior where appropriate.
Here we switch the default so that a "terraform apply" with no arguments
will -- if it computes a non-empty diff -- display the diff and wait for
the user to type "yes" in similar vein to the "terraform destroy" command.
This makes the commonly-used "terraform apply" a safe workflow for
interactive use, so "terraform plan" is now mainly for use in automation
where a separate planning step is used. The apply command remains
non-interactive when given an explicit plan file.
The previous behavior -- though not recommended -- can be obtained by
explicitly setting the -auto-approve option on the apply command line,
and indeed that is how all of the tests are updated here so that they can
continue to run non-interactively.
This PR changes manta from being a legacy remote state client to a new backend type. This also includes creating a simple lock within manta
This PR also unifies the way the triton client is configured (the schema) and also uses the same env vars to set the backend up
It is important to note that if the remote state path does not exist, then the backend will create that path. This means the user doesn't need to fall into a chicken and egg situation of creating the directory in advance before interacting with it
This resurrects the previously documented but unused "project" option.
This option is required to create buckets (so they are associated with the
right cloud project) but not to access the buckets later on (because their
names are globally unique).
* Remove the (unused) "project" option.
* Mark the "credentials" option as optional; document behavior when
unset.
* Mark the "path" option as deprecated (was: legacy) to match
Terraform's terminology.
Since we don't currently auto-install provisioner plugins this is
currently placed on the providers documentation page and referred to as
the "Provider Plugin Cache". In future this mechanism may also apply to
provisioners, in which case we'll figure out at that point where better
to place this information so it can be referenced from both the provider
and provisioner documentation pages.
This mechanism for configuring plugins is now deprecated, since it's not
capable of declaring plugin versions. Instead, we recommend just placing
plugins into a particular directory, which is now documented on the
main providers documentation page and linked from the more detailed docs
on plugins in general.
Previously we described inline here where to put the .terraformrc file,
but now we have a separate page all about this file that gives us more
room to describe in more detail where the file is placed and what else it
can do.
This function takes a map of lists of strings and inverts it so that
the string values become keys and the keys become items within the
corresponding lists.
In #15884 we adjusted the plan output to give an explicit command to run
to apply a plan, whereas before this command was just alluded to in the
prose.
Since releasing that, we've got good feedback that it's confusing to
include such instructions when Terraform is running in a workflow
automation tool, because such tools usually abstract away exactly what
commands are run and require users to take different actions to
proceed through the workflow.
To accommodate such environments while retaining helpful messages for
normal CLI usage, here we introduce a new environment variable
TF_IN_AUTOMATION which, when set to a non-empty value, is a hint to
Terraform that it isn't being run in an interactive command shell and
it should thus tone down the "next steps" messaging.
The documentation for this setting is included as part of the "...in
automation" guide since it's not generally useful in other cases. We also
intentionally disclaim comprehensive support for this since we want to
avoid creating an extreme number of "if running in automation..."
codepaths that would increase the testing matrix and hurt maintainability.
The focus is specifically on the output of the three commands we give in
the automation guide, which at present means the following two situations:
* "terraform init" does not include the final paragraphs that suggest
running "terraform plan" and tell you in what situations you might need
to re-run "terraform init".
* "terraform plan" does not include the final paragraphs that either
warn about not specifying "-out=..." or instruct to run
"terraform apply" with the generated plan file.
Previously we just assumed the reader was familiar with the idea of a
graph but didn't explain it.
Since graphs are an implementation detail of Terraform, rather than
essential information needed for new users, this revises the introduction
text to talk only about _dependencies_, which we assume the user is
familiar with as a more practical concept.
Additionally, Paul Hinze did a great talk on how Terraform uses graphs
at HashiConf 2016 which is good additional content for our existing
"Graph Internals" page, which includes a concise explanation of the
basics of graph theory.
In #15870 we got good feedback that it'd be more useful to have the
various filename-accepting arguments on this provisioner instead accept
strings that represent the contents of such files, so that they can be
generated from elsewhere in the Terraform config.
This change does not achieve that, but it does make room for doing this
later by renaming "minion_config" to "minion_config_file" so that we
can later add a "minion_config" option alongside that takes the file
content, and deprecate "minion_config_file".
Ideally we'd just implement the requested change immediately, but
unfortunately the release schedule doesn't have time for this so this is
a pragmatic change to allow us to make the full requested change at a
later date without backward incompatibilities.
This change is safe because the salt-masterless provisioner has not yet
been included in a release at the time of this commit.
Previously the -upgrade option was covered only on the "terraform init" usage page. It seems also worth mentioning in the main docs on provider versioning, since we're already explaining here other mechanics of the versioning/constraints system.
Terraform modules encapsulate their resources, and dependencies can only
be expressed through outputs, which wasn't clear to me in the existing
documentation. I'm hoping a small change will make that more explicit.
This escapes all characters that might have a special interpretation when embedded into a portion of a URL, including slashes, equals signs and ampersands.
Since Terraform's internals are not 8-bit clean (it assumes UTF-8
strings), we can't implement raw gzip directly. We're going to add
support where it makes sense for passing data to attributes as
base64 so that the result of this function can be used.
* update plugin/provider to make clear this section isn't needed for regular use
* add some links and notes about getting started
* remove the mention of binaries... I 'm not sure it's needed yet
* 'Installing Terraform Providers' section
* sometimes I can't words good
* move the 'installing providers' block
* cleanup of terms
* copy that update to plugins/provider too
The backend has been renamed. Using the old name in the config will
trigger a deprecation warning, but the implementation and the
documentation is the same.
Added locking support via blob leasing (requires that an empty state is
created before any lock can be acquired.
Added support for "environments" in much the same way as the S3 backend.
Fix the -state and -state-out wording to be consistent with other
commands. Remove the erroneous reference to remote state in the website
version of the flag description.
The docs did not mention that it is possible to provide overrides for specific
plugins by placing them into a `terraform.d/plugins/os_arch/` directory inside
the working dir.
Closes#15727.
This restores the earlier behavior of the first positional argument to
terraform init in 0.9, but as a command line option.
The positional argument was removed to improve consistency with other
commands that take a working directory as their first positional argument.
It was originally intended that this functionality would return in a
later release along with some other general improvements to Terraform's
module handling, but we're introducing here an interim solution that
uses the existing module source concept, to allow for easier porting of
workflows that previously depended on the automatic copy behavior.
In a future release this feature may change again as the module
improvements design firms up, but we expect it to be broadly compatible
with this temporary state.
The "terraform init" command has a lot of different functionality now,
making it hard to follow all of the options in the previous presentation.
Instead, here we describe each of the steps and its associated options
separately, hopefully making it easier to understand what each option
relates to.
In addition, much of the detail around backend partial configuration is
factored out into the backend configuration page, where it seems more
"at home"; previously it felt hard to follow exactly how partial
configuration would be used, due to the information on it being split over
two different pages.
This is documented for all other Hashicorp products using this service but
was missed for Terraform. This serves as a disclosure of the fact that
Terraform reaches out to a Hashicorp service, an explanation of the
purpose of that request, and instructions on how to disable it in
environments where it is inappropriate or cannot be supported due to a
firewall or other connectivity restrictions.
Based on feedback from #15569 that the previous example was too abstract
and did not give enough context about what each of the different arguments
mean and how they generalize to other resource types.
The intent here is just to introduce some initial docs on our recommended
way to develop plugins in the same GOPATH as Terraform itself. The
documentation in this area needs some more fundamental rework as it is
rather outdated and mis-organized, but that's outside the scope of what
this change is trying to achieve.
This changed close to the release of beta1 to use underscores as the
separator and to use a lower-case "v" to avoid any issues on
case-insensitive filesystems.
Martin Atkins