2019-01-09 03:39:14 +01:00
package initwd
2019-01-09 01:21:31 +01:00
import (
"fmt"
"github.com/hashicorp/terraform/registry"
"log"
"os"
"path/filepath"
"strings"
version "github.com/hashicorp/go-version"
"github.com/hashicorp/terraform-config-inspect/tfconfig"
"github.com/hashicorp/terraform/addrs"
"github.com/hashicorp/terraform/internal/earlyconfig"
"github.com/hashicorp/terraform/internal/modsdir"
"github.com/hashicorp/terraform/registry/regsrc"
"github.com/hashicorp/terraform/tfdiags"
)
type ModuleInstaller struct {
modsDir string
reg * registry . Client
}
func NewModuleInstaller ( modsDir string , reg * registry . Client ) * ModuleInstaller {
return & ModuleInstaller {
modsDir : modsDir ,
reg : reg ,
}
}
// InstallModules analyses the root module in the given directory and installs
// all of its direct and transitive dependencies into the given modules
// directory, which must already exist.
//
// Since InstallModules makes possibly-time-consuming calls to remote services,
// a hook interface is supported to allow the caller to be notified when
// each module is installed and, for remote modules, when downloading begins.
// LoadConfig guarantees that two hook calls will not happen concurrently but
// it does not guarantee any particular ordering of hook calls. This mechanism
// is for UI feedback only and does not give the caller any control over the
// process.
//
// If modules are already installed in the target directory, they will be
// skipped unless their source address or version have changed or unless
// the upgrade flag is set.
//
// InstallModules never deletes any directory, except in the case where it
// needs to replace a directory that is already present with a newly-extracted
// package.
//
// If the returned diagnostics contains errors then the module installation
// may have wholly or partially completed. Modules must be loaded in order
// to find their dependencies, so this function does many of the same checks
// as LoadConfig as a side-effect.
//
command: "terraform init" can partially initialize for 0.12upgrade
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
2019-01-14 20:11:00 +01:00
// If successful (the returned diagnostics contains no errors) then the
// first return value is the early configuration tree that was constructed by
// the installation process.
func ( i * ModuleInstaller ) InstallModules ( rootDir string , upgrade bool , hooks ModuleInstallHooks ) ( * earlyconfig . Config , tfdiags . Diagnostics ) {
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: installing child modules for %s into %s" , rootDir , i . modsDir )
2019-01-09 01:21:31 +01:00
rootMod , diags := earlyconfig . LoadModule ( rootDir )
if rootMod == nil {
command: "terraform init" can partially initialize for 0.12upgrade
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
2019-01-14 20:11:00 +01:00
return nil , diags
2019-01-09 01:21:31 +01:00
}
manifest , err := modsdir . ReadManifestSnapshotForDir ( i . modsDir )
if err != nil {
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Failed to read modules manifest file" ,
fmt . Sprintf ( "Error reading manifest for %s: %s." , i . modsDir , err ) ,
) )
command: "terraform init" can partially initialize for 0.12upgrade
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
2019-01-14 20:11:00 +01:00
return nil , diags
2019-01-09 01:21:31 +01:00
}
getter := reusingGetter { }
command: "terraform init" can partially initialize for 0.12upgrade
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
2019-01-14 20:11:00 +01:00
cfg , instDiags := i . installDescendentModules ( rootMod , rootDir , manifest , upgrade , hooks , getter )
2019-01-09 01:21:31 +01:00
diags = append ( diags , instDiags ... )
command: "terraform init" can partially initialize for 0.12upgrade
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
2019-01-14 20:11:00 +01:00
return cfg , diags
2019-01-09 01:21:31 +01:00
}
command: "terraform init" can partially initialize for 0.12upgrade
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
2019-01-14 20:11:00 +01:00
func ( i * ModuleInstaller ) installDescendentModules ( rootMod * tfconfig . Module , rootDir string , manifest modsdir . Manifest , upgrade bool , hooks ModuleInstallHooks , getter reusingGetter ) ( * earlyconfig . Config , tfdiags . Diagnostics ) {
2019-01-09 01:21:31 +01:00
var diags tfdiags . Diagnostics
if hooks == nil {
// Use our no-op implementation as a placeholder
2019-01-09 03:39:14 +01:00
hooks = ModuleInstallHooksImpl { }
2019-01-09 01:21:31 +01:00
}
// Create a manifest record for the root module. This will be used if
// there are any relative-pathed modules in the root.
manifest [ "" ] = modsdir . Record {
Key : "" ,
Dir : rootDir ,
}
command: "terraform init" can partially initialize for 0.12upgrade
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
2019-01-14 20:11:00 +01:00
cfg , cDiags := earlyconfig . BuildConfig ( rootMod , earlyconfig . ModuleWalkerFunc (
2019-01-09 01:21:31 +01:00
func ( req * earlyconfig . ModuleRequest ) ( * tfconfig . Module , * version . Version , tfdiags . Diagnostics ) {
key := manifest . ModuleKey ( req . Path )
instPath := i . packageInstallPath ( req . Path )
log . Printf ( "[DEBUG] Module installer: begin %s" , key )
// First we'll check if we need to upgrade/replace an existing
// installed module, and delete it out of the way if so.
replace := upgrade
if ! replace {
record , recorded := manifest [ key ]
switch {
case ! recorded :
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s is not yet installed" , key )
2019-01-09 01:21:31 +01:00
replace = true
case record . SourceAddr != req . SourceAddr :
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s source address has changed from %q to %q" , key , record . SourceAddr , req . SourceAddr )
2019-01-09 01:21:31 +01:00
replace = true
case record . Version != nil && ! req . VersionConstraints . Check ( record . Version ) :
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s version %s no longer compatible with constraints %s" , key , record . Version , req . VersionConstraints )
2019-01-09 01:21:31 +01:00
replace = true
}
}
// If we _are_ planning to replace this module, then we'll remove
// it now so our installation code below won't conflict with any
// existing remnants.
if replace {
if _ , recorded := manifest [ key ] ; recorded {
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: discarding previous record of %s prior to reinstall" , key )
2019-01-09 01:21:31 +01:00
}
delete ( manifest , key )
// Deleting a module invalidates all of its descendent modules too.
keyPrefix := key + "."
for subKey := range manifest {
if strings . HasPrefix ( subKey , keyPrefix ) {
if _ , recorded := manifest [ subKey ] ; recorded {
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: also discarding downstream %s" , subKey )
2019-01-09 01:21:31 +01:00
}
delete ( manifest , subKey )
}
}
}
record , recorded := manifest [ key ]
if ! recorded {
// Clean up any stale cache directory that might be present.
// If this is a local (relative) source then the dir will
// not exist, but we'll ignore that.
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: cleaning directory %s prior to install of %s" , instPath , key )
2019-01-09 01:21:31 +01:00
err := os . RemoveAll ( instPath )
if err != nil && ! os . IsNotExist ( err ) {
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: failed to remove %s: %s" , key , err )
2019-01-09 01:21:31 +01:00
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Failed to remove local module cache" ,
fmt . Sprintf (
"Terraform tried to remove %s in order to reinstall this module, but encountered an error: %s" ,
instPath , err ,
) ,
) )
return nil , nil , diags
}
} else {
// If this module is already recorded and its root directory
// exists then we will just load what's already there and
// keep our existing record.
info , err := os . Stat ( record . Dir )
if err == nil && info . IsDir ( ) {
mod , mDiags := earlyconfig . LoadModule ( record . Dir )
diags = diags . Append ( mDiags )
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: Module installer: %s %s already installed in %s" , key , record . Version , record . Dir )
2019-01-09 01:21:31 +01:00
return mod , record . Version , diags
}
}
// If we get down here then it's finally time to actually install
// the module. There are some variants to this process depending
// on what type of module source address we have.
switch {
case isLocalSourceAddr ( req . SourceAddr ) :
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s has local path %q" , key , req . SourceAddr )
2019-01-09 01:21:31 +01:00
mod , mDiags := i . installLocalModule ( req , key , manifest , hooks )
diags = append ( diags , mDiags ... )
return mod , nil , diags
case isRegistrySourceAddr ( req . SourceAddr ) :
addr , err := regsrc . ParseModuleSource ( req . SourceAddr )
if err != nil {
// Should never happen because isRegistrySourceAddr already validated
panic ( err )
}
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s is a registry module at %s" , key , addr )
2019-01-09 01:21:31 +01:00
mod , v , mDiags := i . installRegistryModule ( req , key , instPath , addr , manifest , hooks , getter )
diags = append ( diags , mDiags ... )
return mod , v , diags
default :
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s address %q will be handled by go-getter" , key , req . SourceAddr )
2019-01-09 01:21:31 +01:00
mod , mDiags := i . installGoGetterModule ( req , key , instPath , manifest , hooks , getter )
diags = append ( diags , mDiags ... )
return mod , nil , diags
}
} ,
) )
diags = append ( diags , cDiags ... )
err := manifest . WriteSnapshotToDir ( i . modsDir )
if err != nil {
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Failed to update module manifest" ,
fmt . Sprintf ( "Unable to write the module manifest file: %s" , err ) ,
) )
}
command: "terraform init" can partially initialize for 0.12upgrade
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.
This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.
In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.
Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.
The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
excludes Terraform versions prior to v0.12 then the configuration is
probably _already_ upgraded and so it's just a normal syntax error,
even if the early loader didn't detect it.
Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
2019-01-14 20:11:00 +01:00
return cfg , diags
2019-01-09 01:21:31 +01:00
}
2019-01-09 03:39:14 +01:00
func ( i * ModuleInstaller ) installLocalModule ( req * earlyconfig . ModuleRequest , key string , manifest modsdir . Manifest , hooks ModuleInstallHooks ) ( * tfconfig . Module , tfdiags . Diagnostics ) {
2019-01-09 01:21:31 +01:00
var diags tfdiags . Diagnostics
parentKey := manifest . ModuleKey ( req . Parent . Path )
parentRecord , recorded := manifest [ parentKey ]
if ! recorded {
// This is indicative of a bug rather than a user-actionable error
panic ( fmt . Errorf ( "missing manifest record for parent module %s" , parentKey ) )
}
if len ( req . VersionConstraints ) != 0 {
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Invalid version constraint" ,
fmt . Sprintf ( "Cannot apply a version constraint to module %q (at %s:%d) because it has a relative local path." , req . Name , req . CallPos . Filename , req . CallPos . Line ) ,
) )
}
// For local sources we don't actually need to modify the
// filesystem at all because the parent already wrote
// the files we need, and so we just load up what's already here.
newDir := filepath . Join ( parentRecord . Dir , req . SourceAddr )
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s uses directory from parent: %s" , key , newDir )
2019-01-09 01:21:31 +01:00
mod , mDiags := earlyconfig . LoadModule ( newDir )
if mod == nil {
// nil indicates missing or unreadable directory, so we'll
// discard the returned diags and return a more specific
// error message here.
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Unreadable module directory" ,
fmt . Sprintf ( "The directory %s could not be read for module %q at %s:%d." , newDir , req . Name , req . CallPos . Filename , req . CallPos . Line ) ,
) )
} else {
diags = diags . Append ( mDiags )
}
// Note the local location in our manifest.
manifest [ key ] = modsdir . Record {
Key : key ,
Dir : newDir ,
SourceAddr : req . SourceAddr ,
}
log . Printf ( "[DEBUG] Module installer: %s installed at %s" , key , newDir )
hooks . Install ( key , nil , newDir )
return mod , diags
}
2019-01-09 03:39:14 +01:00
func ( i * ModuleInstaller ) installRegistryModule ( req * earlyconfig . ModuleRequest , key string , instPath string , addr * regsrc . Module , manifest modsdir . Manifest , hooks ModuleInstallHooks , getter reusingGetter ) ( * tfconfig . Module , * version . Version , tfdiags . Diagnostics ) {
2019-01-09 01:21:31 +01:00
var diags tfdiags . Diagnostics
hostname , err := addr . SvcHost ( )
if err != nil {
// If it looks like the user was trying to use punycode then we'll generate
// a specialized error for that case. We require the unicode form of
// hostname so that hostnames are always human-readable in configuration
// and punycode can't be used to hide a malicious module hostname.
if strings . HasPrefix ( addr . RawHost . Raw , "xn--" ) {
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Invalid module registry hostname" ,
fmt . Sprintf ( "The hostname portion of the module %q source address (at %s:%d) is not an acceptable hostname. Internationalized domain names must be given in unicode form rather than ASCII (\"punycode\") form." , req . Name , req . CallPos . Filename , req . CallPos . Line ) ,
) )
} else {
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Invalid module registry hostname" ,
fmt . Sprintf ( "The hostname portion of the module %q source address (at %s:%d) is not a valid hostname." , req . Name , req . CallPos . Filename , req . CallPos . Line ) ,
) )
}
return nil , nil , diags
}
reg := i . reg
log . Printf ( "[DEBUG] %s listing available versions of %s at %s" , key , addr , hostname )
resp , err := reg . ModuleVersions ( addr )
if err != nil {
if registry . IsModuleNotFound ( err ) {
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Module not found" ,
fmt . Sprintf ( "Module %q (from %s:%d) cannot be found in the module registry at %s." , req . Name , req . CallPos . Filename , req . CallPos . Line , hostname ) ,
) )
} else {
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Error accessing remote module registry" ,
fmt . Sprintf ( "Failed to retrieve available versions for module %q (%s:%d) from %s: %s." , req . Name , req . CallPos . Filename , req . CallPos . Line , hostname , err ) ,
) )
}
return nil , nil , diags
}
// The response might contain information about dependencies to allow us
// to potentially optimize future requests, but we don't currently do that
// and so for now we'll just take the first item which is guaranteed to
// be the address we requested.
if len ( resp . Modules ) < 1 {
// Should never happen, but since this is a remote service that may
// be implemented by third-parties we will handle it gracefully.
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Invalid response from remote module registry" ,
fmt . Sprintf ( "The registry at %s returned an invalid response when Terraform requested available versions for module %q (%s:%d)." , hostname , req . Name , req . CallPos . Filename , req . CallPos . Line ) ,
) )
return nil , nil , diags
}
modMeta := resp . Modules [ 0 ]
var latestMatch * version . Version
var latestVersion * version . Version
for _ , mv := range modMeta . Versions {
v , err := version . NewVersion ( mv . Version )
if err != nil {
// Should never happen if the registry server is compliant with
// the protocol, but we'll warn if not to assist someone who
// might be developing a module registry server.
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Warning ,
"Invalid response from remote module registry" ,
fmt . Sprintf ( "The registry at %s returned an invalid version string %q for module %q (%s:%d), which Terraform ignored." , hostname , mv . Version , req . Name , req . CallPos . Filename , req . CallPos . Line ) ,
) )
continue
}
// If we've found a pre-release version then we'll ignore it unless
// it was exactly requested.
if v . Prerelease ( ) != "" && req . VersionConstraints . String ( ) != v . String ( ) {
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s ignoring %s because it is a pre-release and was not requested exactly" , key , v )
2019-01-09 01:21:31 +01:00
continue
}
if latestVersion == nil || v . GreaterThan ( latestVersion ) {
latestVersion = v
}
if req . VersionConstraints . Check ( v ) {
if latestMatch == nil || v . GreaterThan ( latestMatch ) {
latestMatch = v
}
}
}
if latestVersion == nil {
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Module has no versions" ,
fmt . Sprintf ( "Module %q (%s:%d) has no versions available on %s." , addr , req . CallPos . Filename , req . CallPos . Line , hostname ) ,
) )
return nil , nil , diags
}
if latestMatch == nil {
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Unresolvable module version constraint" ,
fmt . Sprintf ( "There is no available version of module %q (%s:%d) which matches the given version constraint. The newest available version is %s." , addr , req . CallPos . Filename , req . CallPos . Line , latestVersion ) ,
) )
return nil , nil , diags
}
// Report up to the caller that we're about to start downloading.
packageAddr , _ := splitAddrSubdir ( req . SourceAddr )
hooks . Download ( key , packageAddr , latestMatch )
// If we manage to get down here then we've found a suitable version to
// install, so we need to ask the registry where we should download it from.
// The response to this is a go-getter-style address string.
dlAddr , err := reg . ModuleLocation ( addr , latestMatch . String ( ) )
if err != nil {
log . Printf ( "[ERROR] %s from %s %s: %s" , key , addr , latestMatch , err )
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Invalid response from remote module registry" ,
fmt . Sprintf ( "The remote registry at %s failed to return a download URL for %s %s." , hostname , addr , latestMatch ) ,
) )
return nil , nil , diags
}
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s %s %s is available at %q" , key , addr , latestMatch , dlAddr )
2019-01-09 01:21:31 +01:00
modDir , err := getter . getWithGoGetter ( instPath , dlAddr )
if err != nil {
// Errors returned by go-getter have very inconsistent quality as
// end-user error messages, but for now we're accepting that because
// we have no way to recognize any specific errors to improve them
// and masking the error entirely would hide valuable diagnostic
// information from the user.
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Failed to download module" ,
fmt . Sprintf ( "Error attempting to download module %q (%s:%d) source code from %q: %s." , req . Name , req . CallPos . Filename , req . CallPos . Line , dlAddr , err ) ,
) )
return nil , nil , diags
}
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s %q was downloaded to %s" , key , dlAddr , modDir )
2019-01-09 01:21:31 +01:00
if addr . RawSubmodule != "" {
// Append the user's requested subdirectory to any subdirectory that
// was implied by any of the nested layers we expanded within go-getter.
modDir = filepath . Join ( modDir , addr . RawSubmodule )
}
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s should now be at %s" , key , modDir )
2019-01-09 01:21:31 +01:00
// Finally we are ready to try actually loading the module.
mod , mDiags := earlyconfig . LoadModule ( modDir )
if mod == nil {
// nil indicates missing or unreadable directory, so we'll
// discard the returned diags and return a more specific
// error message here. For registry modules this actually
// indicates a bug in the code above, since it's not the
// user's responsibility to create the directory in this case.
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Unreadable module directory" ,
fmt . Sprintf ( "The directory %s could not be read. This is a bug in Terraform and should be reported." , modDir ) ,
) )
} else {
diags = append ( diags , mDiags ... )
}
// Note the local location in our manifest.
manifest [ key ] = modsdir . Record {
Key : key ,
Version : latestMatch ,
Dir : modDir ,
SourceAddr : req . SourceAddr ,
}
log . Printf ( "[DEBUG] Module installer: %s installed at %s" , key , modDir )
hooks . Install ( key , latestMatch , modDir )
return mod , latestMatch , diags
}
2019-01-09 03:39:14 +01:00
func ( i * ModuleInstaller ) installGoGetterModule ( req * earlyconfig . ModuleRequest , key string , instPath string , manifest modsdir . Manifest , hooks ModuleInstallHooks , getter reusingGetter ) ( * tfconfig . Module , tfdiags . Diagnostics ) {
2019-01-09 01:21:31 +01:00
var diags tfdiags . Diagnostics
// Report up to the caller that we're about to start downloading.
packageAddr , _ := splitAddrSubdir ( req . SourceAddr )
hooks . Download ( key , packageAddr , nil )
modDir , err := getter . getWithGoGetter ( instPath , req . SourceAddr )
if err != nil {
2019-03-13 19:17:14 +01:00
if err , ok := err . ( * MaybeRelativePathErr ) ; ok {
log . Printf (
"[TRACE] ModuleInstaller: %s looks like a local path but is missing ./ or ../" ,
req . SourceAddr ,
)
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Module not found" ,
fmt . Sprintf (
"The module address %q could not be resolved.\n\n" +
"If you intended this as a path relative to the current " +
"module, use \"./%s\" instead. The \"./\" prefix " +
"indicates that the address is a relative filesystem path." ,
req . SourceAddr , req . SourceAddr ,
) ,
) )
} else {
// Errors returned by go-getter have very inconsistent quality as
// end-user error messages, but for now we're accepting that because
// we have no way to recognize any specific errors to improve them
// and masking the error entirely would hide valuable diagnostic
// information from the user.
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Failed to download module" ,
fmt . Sprintf ( "Error attempting to download module %q (%s:%d) source code from %q: %s" , req . Name , req . CallPos . Filename , req . CallPos . Line , packageAddr , err ) ,
) )
}
2019-01-09 01:21:31 +01:00
return nil , diags
2019-03-13 19:17:14 +01:00
2019-01-09 01:21:31 +01:00
}
2019-01-09 03:39:14 +01:00
log . Printf ( "[TRACE] ModuleInstaller: %s %q was downloaded to %s" , key , req . SourceAddr , modDir )
2019-01-09 01:21:31 +01:00
mod , mDiags := earlyconfig . LoadModule ( modDir )
if mod == nil {
// nil indicates missing or unreadable directory, so we'll
// discard the returned diags and return a more specific
// error message here. For go-getter modules this actually
// indicates a bug in the code above, since it's not the
// user's responsibility to create the directory in this case.
diags = diags . Append ( tfdiags . Sourceless (
tfdiags . Error ,
"Unreadable module directory" ,
fmt . Sprintf ( "The directory %s could not be read. This is a bug in Terraform and should be reported." , modDir ) ,
) )
} else {
diags = append ( diags , mDiags ... )
}
// Note the local location in our manifest.
manifest [ key ] = modsdir . Record {
Key : key ,
Dir : modDir ,
SourceAddr : req . SourceAddr ,
}
log . Printf ( "[DEBUG] Module installer: %s installed at %s" , key , modDir )
hooks . Install ( key , nil , modDir )
return mod , diags
}
func ( i * ModuleInstaller ) packageInstallPath ( modulePath addrs . Module ) string {
return filepath . Join ( i . modsDir , strings . Join ( modulePath , "." ) )
}