2018-02-02 05:33:06 +01:00
|
|
|
package configs
|
|
|
|
|
2018-02-08 01:40:58 +01:00
|
|
|
import (
|
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 14:23:07 +01:00
|
|
|
"fmt"
|
various: helpers for collecting necessary provider types
Since schemas are required to interpret provider, resource, and
provisioner attributes in configs, states, and plans, these helpers intend
to make it easier to gather up the the necessary provider types in order
to preload all of the needed schemas before beginning further processing.
Config.ProviderTypes returns directly the list of provider types, since
at this level further detail is not useful: we've not yet run the
provider allocation algorithm, and so the only thing we can reliably
extract here is provider types themselves.
State.ProviderAddrs and Plan.ProviderAddrs each return a list of
absolute provider addresses, which can then be turned into a list of
provider types using the new helper providers.AddressedTypesAbs.
Since we're already using configs.Config throughout core, this also
updates the terraform.LoadSchemas helper to use Config.ProviderTypes
to find the necessary providers, rather than implementing its own
discovery logic. states.State is not yet plumbed in, so we cannot yet
use State.ProviderAddrs to deal with the state but there's a TODO comment
to remind us to update that in a later commit when we swap out
terraform.State for states.State.
A later commit will probably refactor this further so that we can easily
obtain schema for the providers needed to interpret a plan too, but that
is deferred here because further work is required to make core work with
the new plan types first. At that point, terraform.LoadSchemas may become
providers.LoadSchemas with a different interface that just accepts lists
of provider and provisioner names that have been gathered by the caller
using these new helpers.
2018-06-22 02:39:27 +02:00
|
|
|
"sort"
|
|
|
|
|
2018-02-08 01:40:58 +01:00
|
|
|
version "github.com/hashicorp/go-version"
|
2019-09-10 00:58:44 +02:00
|
|
|
"github.com/hashicorp/hcl/v2"
|
2018-04-06 20:10:21 +02:00
|
|
|
"github.com/hashicorp/terraform/addrs"
|
2020-03-26 20:04:48 +01:00
|
|
|
"github.com/hashicorp/terraform/internal/getproviders"
|
2018-02-08 01:40:58 +01:00
|
|
|
)
|
|
|
|
|
2018-02-02 05:33:06 +01:00
|
|
|
// A Config is a node in the tree of modules within a configuration.
|
|
|
|
//
|
|
|
|
// The module tree is constructed by following ModuleCall instances recursively
|
|
|
|
// through the root module transitively into descendent modules.
|
|
|
|
//
|
|
|
|
// A module tree described in *this* package represents the static tree
|
|
|
|
// represented by configuration. During evaluation a static ModuleNode may
|
|
|
|
// expand into zero or more module instances depending on the use of count and
|
|
|
|
// for_each configuration attributes within each call.
|
|
|
|
type Config struct {
|
|
|
|
// RootModule points to the Config for the root module within the same
|
|
|
|
// module tree as this module. If this module _is_ the root module then
|
|
|
|
// this is self-referential.
|
|
|
|
Root *Config
|
|
|
|
|
|
|
|
// ParentModule points to the Config for the module that directly calls
|
|
|
|
// this module. If this is the root module then this field is nil.
|
|
|
|
Parent *Config
|
|
|
|
|
2018-02-10 00:32:49 +01:00
|
|
|
// Path is a sequence of module logical names that traverse from the root
|
|
|
|
// module to this config. Path is empty for the root module.
|
|
|
|
//
|
2018-04-06 20:10:21 +02:00
|
|
|
// This should only be used to display paths to the end-user in rare cases
|
|
|
|
// where we are talking about the static module tree, before module calls
|
2019-03-21 22:05:41 +01:00
|
|
|
// have been resolved. In most cases, an addrs.ModuleInstance describing
|
2018-04-06 20:10:21 +02:00
|
|
|
// a node in the dynamic module tree is better, since it will then include
|
|
|
|
// any keys resulting from evaluating "count" and "for_each" arguments.
|
|
|
|
Path addrs.Module
|
2018-02-10 00:32:49 +01:00
|
|
|
|
2018-02-02 05:33:06 +01:00
|
|
|
// ChildModules points to the Config for each of the direct child modules
|
|
|
|
// called from this module. The keys in this map match the keys in
|
|
|
|
// Module.ModuleCalls.
|
|
|
|
Children map[string]*Config
|
|
|
|
|
2018-02-08 01:40:58 +01:00
|
|
|
// Module points to the object describing the configuration for the
|
2018-02-02 05:33:06 +01:00
|
|
|
// various elements (variables, resources, etc) defined by this module.
|
2018-02-08 01:40:58 +01:00
|
|
|
Module *Module
|
|
|
|
|
2018-02-09 03:56:48 +01:00
|
|
|
// CallRange is the source range for the header of the module block that
|
|
|
|
// requested this module.
|
|
|
|
//
|
|
|
|
// This field is meaningless for the root module, where its contents are undefined.
|
|
|
|
CallRange hcl.Range
|
|
|
|
|
2018-02-08 01:40:58 +01:00
|
|
|
// SourceAddr is the source address that the referenced module was requested
|
|
|
|
// from, as specified in configuration.
|
|
|
|
//
|
|
|
|
// This field is meaningless for the root module, where its contents are undefined.
|
|
|
|
SourceAddr string
|
|
|
|
|
|
|
|
// SourceAddrRange is the location in the configuration source where the
|
|
|
|
// SourceAddr value was set, for use in diagnostic messages.
|
|
|
|
//
|
|
|
|
// This field is meaningless for the root module, where its contents are undefined.
|
|
|
|
SourceAddrRange hcl.Range
|
|
|
|
|
|
|
|
// Version is the specific version that was selected for this module,
|
|
|
|
// based on version constraints given in configuration.
|
|
|
|
//
|
2018-02-09 03:56:48 +01:00
|
|
|
// This field is nil if the module was loaded from a non-registry source,
|
|
|
|
// since versions are not supported for other sources.
|
|
|
|
//
|
|
|
|
// This field is meaningless for the root module, where it will always
|
|
|
|
// be nil.
|
2018-02-08 01:40:58 +01:00
|
|
|
Version *version.Version
|
|
|
|
}
|
|
|
|
|
2020-06-09 19:32:56 +02:00
|
|
|
// ModuleRequirements represents the provider requirements for an individual
|
|
|
|
// module, along with references to any child modules. This is used to
|
|
|
|
// determine which modules require which providers.
|
|
|
|
type ModuleRequirements struct {
|
2020-06-09 19:33:07 +02:00
|
|
|
Name string
|
|
|
|
SourceAddr string
|
|
|
|
SourceDir string
|
2020-06-09 19:32:56 +02:00
|
|
|
Requirements getproviders.Requirements
|
|
|
|
Children map[string]*ModuleRequirements
|
|
|
|
}
|
|
|
|
|
2018-04-06 22:57:21 +02:00
|
|
|
// NewEmptyConfig constructs a single-node configuration tree with an empty
|
|
|
|
// root module. This is generally a pretty useless thing to do, so most callers
|
|
|
|
// should instead use BuildConfig.
|
|
|
|
func NewEmptyConfig() *Config {
|
|
|
|
ret := &Config{}
|
|
|
|
ret.Root = ret
|
|
|
|
ret.Children = make(map[string]*Config)
|
|
|
|
ret.Module = &Module{}
|
|
|
|
return ret
|
|
|
|
}
|
|
|
|
|
2018-02-08 01:40:58 +01:00
|
|
|
// Depth returns the number of "hops" the receiver is from the root of its
|
|
|
|
// module tree, with the root module having a depth of zero.
|
|
|
|
func (c *Config) Depth() int {
|
|
|
|
ret := 0
|
|
|
|
this := c
|
|
|
|
for this.Parent != nil {
|
|
|
|
ret++
|
|
|
|
this = this.Parent
|
|
|
|
}
|
|
|
|
return ret
|
|
|
|
}
|
|
|
|
|
|
|
|
// DeepEach calls the given function once for each module in the tree, starting
|
|
|
|
// with the receiver.
|
|
|
|
//
|
|
|
|
// A parent is always called before its children and children of a particular
|
|
|
|
// node are visited in lexicographic order by their names.
|
|
|
|
func (c *Config) DeepEach(cb func(c *Config)) {
|
|
|
|
cb(c)
|
|
|
|
|
|
|
|
names := make([]string, 0, len(c.Children))
|
|
|
|
for name := range c.Children {
|
|
|
|
names = append(names, name)
|
|
|
|
}
|
|
|
|
|
|
|
|
for _, name := range names {
|
|
|
|
c.Children[name].DeepEach(cb)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// AllModules returns a slice of all the receiver and all of its descendent
|
|
|
|
// nodes in the module tree, in the same order they would be visited by
|
|
|
|
// DeepEach.
|
|
|
|
func (c *Config) AllModules() []*Config {
|
|
|
|
var ret []*Config
|
|
|
|
c.DeepEach(func(c *Config) {
|
|
|
|
ret = append(ret, c)
|
|
|
|
})
|
|
|
|
return ret
|
2018-02-02 05:33:06 +01:00
|
|
|
}
|
2018-03-28 00:31:05 +02:00
|
|
|
|
|
|
|
// Descendent returns the descendent config that has the given path beneath
|
|
|
|
// the receiver, or nil if there is no such module.
|
|
|
|
//
|
|
|
|
// The path traverses the static module tree, prior to any expansion to handle
|
|
|
|
// count and for_each arguments.
|
|
|
|
//
|
|
|
|
// An empty path will just return the receiver, and is therefore pointless.
|
2018-04-06 20:10:21 +02:00
|
|
|
func (c *Config) Descendent(path addrs.Module) *Config {
|
2018-03-28 00:31:05 +02:00
|
|
|
current := c
|
|
|
|
for _, name := range path {
|
|
|
|
current = current.Children[name]
|
|
|
|
if current == nil {
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return current
|
|
|
|
}
|
2018-04-06 20:10:21 +02:00
|
|
|
|
|
|
|
// DescendentForInstance is like Descendent except that it accepts a path
|
|
|
|
// to a particular module instance in the dynamic module graph, returning
|
|
|
|
// the node from the static module graph that corresponds to it.
|
|
|
|
//
|
|
|
|
// All instances created by a particular module call share the same
|
|
|
|
// configuration, so the keys within the given path are disregarded.
|
|
|
|
func (c *Config) DescendentForInstance(path addrs.ModuleInstance) *Config {
|
|
|
|
current := c
|
|
|
|
for _, step := range path {
|
|
|
|
current = current.Children[step.Name]
|
|
|
|
if current == nil {
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return current
|
|
|
|
}
|
various: helpers for collecting necessary provider types
Since schemas are required to interpret provider, resource, and
provisioner attributes in configs, states, and plans, these helpers intend
to make it easier to gather up the the necessary provider types in order
to preload all of the needed schemas before beginning further processing.
Config.ProviderTypes returns directly the list of provider types, since
at this level further detail is not useful: we've not yet run the
provider allocation algorithm, and so the only thing we can reliably
extract here is provider types themselves.
State.ProviderAddrs and Plan.ProviderAddrs each return a list of
absolute provider addresses, which can then be turned into a list of
provider types using the new helper providers.AddressedTypesAbs.
Since we're already using configs.Config throughout core, this also
updates the terraform.LoadSchemas helper to use Config.ProviderTypes
to find the necessary providers, rather than implementing its own
discovery logic. states.State is not yet plumbed in, so we cannot yet
use State.ProviderAddrs to deal with the state but there's a TODO comment
to remind us to update that in a later commit when we swap out
terraform.State for states.State.
A later commit will probably refactor this further so that we can easily
obtain schema for the providers needed to interpret a plan too, but that
is deferred here because further work is required to make core work with
the new plan types first. At that point, terraform.LoadSchemas may become
providers.LoadSchemas with a different interface that just accepts lists
of provider and provisioner names that have been gathered by the caller
using these new helpers.
2018-06-22 02:39:27 +02:00
|
|
|
|
2020-03-26 20:04:48 +01:00
|
|
|
// ProviderRequirements searches the full tree of modules under the receiver
|
|
|
|
// for both explicit and implicit dependencies on providers.
|
|
|
|
//
|
|
|
|
// The result is a full manifest of all of the providers that must be available
|
|
|
|
// in order to work with the receiving configuration.
|
|
|
|
//
|
|
|
|
// If the returned diagnostics includes errors then the resulting Requirements
|
|
|
|
// may be incomplete.
|
|
|
|
func (c *Config) ProviderRequirements() (getproviders.Requirements, hcl.Diagnostics) {
|
|
|
|
reqs := make(getproviders.Requirements)
|
2020-06-22 18:13:35 +02:00
|
|
|
diags := c.addProviderRequirements(reqs, true)
|
2020-06-09 19:32:56 +02:00
|
|
|
|
2020-03-26 20:04:48 +01:00
|
|
|
return reqs, diags
|
|
|
|
}
|
|
|
|
|
2020-06-09 19:32:56 +02:00
|
|
|
// ProviderRequirementsByModule searches the full tree of modules under the
|
|
|
|
// receiver for both explicit and implicit dependencies on providers,
|
|
|
|
// constructing a tree where the requirements are broken out by module.
|
|
|
|
//
|
|
|
|
// If the returned diagnostics includes errors then the resulting Requirements
|
|
|
|
// may be incomplete.
|
|
|
|
func (c *Config) ProviderRequirementsByModule() (*ModuleRequirements, hcl.Diagnostics) {
|
|
|
|
reqs := make(getproviders.Requirements)
|
2020-06-22 18:13:35 +02:00
|
|
|
diags := c.addProviderRequirements(reqs, false)
|
2020-06-09 19:32:56 +02:00
|
|
|
|
|
|
|
children := make(map[string]*ModuleRequirements)
|
|
|
|
for name, child := range c.Children {
|
|
|
|
childReqs, childDiags := child.ProviderRequirementsByModule()
|
2020-06-09 19:33:07 +02:00
|
|
|
childReqs.Name = name
|
2020-06-09 19:32:56 +02:00
|
|
|
children[name] = childReqs
|
|
|
|
diags = append(diags, childDiags...)
|
|
|
|
}
|
|
|
|
|
|
|
|
ret := &ModuleRequirements{
|
2020-06-09 19:33:07 +02:00
|
|
|
SourceAddr: c.SourceAddr,
|
|
|
|
SourceDir: c.Module.SourceDir,
|
2020-06-09 19:32:56 +02:00
|
|
|
Requirements: reqs,
|
|
|
|
Children: children,
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret, diags
|
|
|
|
}
|
|
|
|
|
2020-03-26 20:04:48 +01:00
|
|
|
// addProviderRequirements is the main part of the ProviderRequirements
|
|
|
|
// implementation, gradually mutating a shared requirements object to
|
2020-06-22 18:13:35 +02:00
|
|
|
// eventually return. If the recurse argument is true, the requirements will
|
|
|
|
// include all descendant modules; otherwise, only the specified module.
|
|
|
|
func (c *Config) addProviderRequirements(reqs getproviders.Requirements, recurse bool) hcl.Diagnostics {
|
2020-03-26 20:04:48 +01:00
|
|
|
var diags hcl.Diagnostics
|
|
|
|
|
|
|
|
// First we'll deal with the requirements directly in _our_ module...
|
2020-09-21 22:32:50 +02:00
|
|
|
if c.Module.ProviderRequirements != nil {
|
|
|
|
for _, providerReqs := range c.Module.ProviderRequirements.RequiredProviders {
|
|
|
|
fqn := providerReqs.Type
|
|
|
|
if _, ok := reqs[fqn]; !ok {
|
|
|
|
// We'll at least have an unconstrained dependency then, but might
|
|
|
|
// add to this in the loop below.
|
|
|
|
reqs[fqn] = nil
|
|
|
|
}
|
|
|
|
// The model of version constraints in this package is still the
|
|
|
|
// old one using a different upstream module to represent versions,
|
|
|
|
// so we'll need to shim that out here for now. The two parsers
|
|
|
|
// don't exactly agree in practice 🙄 so this might produce new errors.
|
|
|
|
// TODO: Use the new parser throughout this package so we can get the
|
|
|
|
// better error messages it produces in more situations.
|
|
|
|
constraints, err := getproviders.ParseVersionConstraints(providerReqs.Requirement.Required.String())
|
|
|
|
if err != nil {
|
|
|
|
diags = diags.Append(&hcl.Diagnostic{
|
|
|
|
Severity: hcl.DiagError,
|
|
|
|
Summary: "Invalid version constraint",
|
|
|
|
// The errors returned by ParseVersionConstraint already include
|
|
|
|
// the section of input that was incorrect, so we don't need to
|
|
|
|
// include that here.
|
|
|
|
Detail: fmt.Sprintf("Incorrect version constraint syntax: %s.", err.Error()),
|
|
|
|
Subject: providerReqs.Requirement.DeclRange.Ptr(),
|
|
|
|
})
|
|
|
|
}
|
|
|
|
reqs[fqn] = append(reqs[fqn], constraints...)
|
2020-06-12 01:34:16 +02:00
|
|
|
}
|
2020-03-26 20:04:48 +01:00
|
|
|
}
|
2020-09-21 22:32:50 +02:00
|
|
|
|
2020-03-26 20:04:48 +01:00
|
|
|
// Each resource in the configuration creates an *implicit* provider
|
|
|
|
// dependency, though we'll only record it if there isn't already
|
|
|
|
// an explicit dependency on the same provider.
|
|
|
|
for _, rc := range c.Module.ManagedResources {
|
|
|
|
fqn := rc.Provider
|
|
|
|
if _, exists := reqs[fqn]; exists {
|
|
|
|
// Explicit dependency already present
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
reqs[fqn] = nil
|
|
|
|
}
|
|
|
|
for _, rc := range c.Module.DataResources {
|
|
|
|
fqn := rc.Provider
|
|
|
|
if _, exists := reqs[fqn]; exists {
|
|
|
|
// Explicit dependency already present
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
reqs[fqn] = nil
|
|
|
|
}
|
|
|
|
|
2020-04-10 18:56:55 +02:00
|
|
|
// "provider" block can also contain version constraints
|
2020-06-02 15:29:59 +02:00
|
|
|
for _, provider := range c.Module.ProviderConfigs {
|
|
|
|
fqn := c.Module.ProviderForLocalConfig(addrs.LocalProviderConfig{LocalName: provider.Name})
|
2020-04-10 18:56:55 +02:00
|
|
|
if _, ok := reqs[fqn]; !ok {
|
|
|
|
// We'll at least have an unconstrained dependency then, but might
|
|
|
|
// add to this in the loop below.
|
|
|
|
reqs[fqn] = nil
|
|
|
|
}
|
|
|
|
if provider.Version.Required != nil {
|
2020-06-12 01:34:16 +02:00
|
|
|
// The model of version constraints in this package is still the
|
|
|
|
// old one using a different upstream module to represent versions,
|
|
|
|
// so we'll need to shim that out here for now. The two parsers
|
|
|
|
// don't exactly agree in practice 🙄 so this might produce new errors.
|
|
|
|
// TODO: Use the new parser throughout this package so we can get the
|
|
|
|
// better error messages it produces in more situations.
|
|
|
|
constraints, err := getproviders.ParseVersionConstraints(provider.Version.Required.String())
|
|
|
|
if err != nil {
|
|
|
|
diags = diags.Append(&hcl.Diagnostic{
|
|
|
|
Severity: hcl.DiagError,
|
|
|
|
Summary: "Invalid version constraint",
|
|
|
|
// The errors returned by ParseVersionConstraint already include
|
|
|
|
// the section of input that was incorrect, so we don't need to
|
|
|
|
// include that here.
|
|
|
|
Detail: fmt.Sprintf("Incorrect version constraint syntax: %s.", err.Error()),
|
|
|
|
Subject: provider.Version.DeclRange.Ptr(),
|
|
|
|
})
|
|
|
|
}
|
2020-04-10 18:56:55 +02:00
|
|
|
reqs[fqn] = append(reqs[fqn], constraints...)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-06-22 18:13:35 +02:00
|
|
|
if recurse {
|
|
|
|
for _, childConfig := range c.Children {
|
|
|
|
moreDiags := childConfig.addProviderRequirements(reqs, true)
|
|
|
|
diags = append(diags, moreDiags...)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-03-26 20:04:48 +01:00
|
|
|
return diags
|
|
|
|
}
|
|
|
|
|
2020-02-03 14:18:04 +01:00
|
|
|
// ProviderTypes returns the FQNs of each distinct provider type referenced
|
various: helpers for collecting necessary provider types
Since schemas are required to interpret provider, resource, and
provisioner attributes in configs, states, and plans, these helpers intend
to make it easier to gather up the the necessary provider types in order
to preload all of the needed schemas before beginning further processing.
Config.ProviderTypes returns directly the list of provider types, since
at this level further detail is not useful: we've not yet run the
provider allocation algorithm, and so the only thing we can reliably
extract here is provider types themselves.
State.ProviderAddrs and Plan.ProviderAddrs each return a list of
absolute provider addresses, which can then be turned into a list of
provider types using the new helper providers.AddressedTypesAbs.
Since we're already using configs.Config throughout core, this also
updates the terraform.LoadSchemas helper to use Config.ProviderTypes
to find the necessary providers, rather than implementing its own
discovery logic. states.State is not yet plumbed in, so we cannot yet
use State.ProviderAddrs to deal with the state but there's a TODO comment
to remind us to update that in a later commit when we swap out
terraform.State for states.State.
A later commit will probably refactor this further so that we can easily
obtain schema for the providers needed to interpret a plan too, but that
is deferred here because further work is required to make core work with
the new plan types first. At that point, terraform.LoadSchemas may become
providers.LoadSchemas with a different interface that just accepts lists
of provider and provisioner names that have been gathered by the caller
using these new helpers.
2018-06-22 02:39:27 +02:00
|
|
|
// in the receiving configuration.
|
|
|
|
//
|
|
|
|
// This is a helper for easily determining which provider types are required
|
|
|
|
// to fully interpret the configuration, though it does not include version
|
|
|
|
// information and so callers are expected to have already dealt with
|
|
|
|
// provider version selection in an earlier step and have identified suitable
|
|
|
|
// versions for each provider.
|
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 14:23:07 +01:00
|
|
|
func (c *Config) ProviderTypes() []addrs.Provider {
|
2020-09-21 22:32:50 +02:00
|
|
|
// Ignore diagnostics here because they relate to version constraints
|
|
|
|
reqs, _ := c.ProviderRequirements()
|
various: helpers for collecting necessary provider types
Since schemas are required to interpret provider, resource, and
provisioner attributes in configs, states, and plans, these helpers intend
to make it easier to gather up the the necessary provider types in order
to preload all of the needed schemas before beginning further processing.
Config.ProviderTypes returns directly the list of provider types, since
at this level further detail is not useful: we've not yet run the
provider allocation algorithm, and so the only thing we can reliably
extract here is provider types themselves.
State.ProviderAddrs and Plan.ProviderAddrs each return a list of
absolute provider addresses, which can then be turned into a list of
provider types using the new helper providers.AddressedTypesAbs.
Since we're already using configs.Config throughout core, this also
updates the terraform.LoadSchemas helper to use Config.ProviderTypes
to find the necessary providers, rather than implementing its own
discovery logic. states.State is not yet plumbed in, so we cannot yet
use State.ProviderAddrs to deal with the state but there's a TODO comment
to remind us to update that in a later commit when we swap out
terraform.State for states.State.
A later commit will probably refactor this further so that we can easily
obtain schema for the providers needed to interpret a plan too, but that
is deferred here because further work is required to make core work with
the new plan types first. At that point, terraform.LoadSchemas may become
providers.LoadSchemas with a different interface that just accepts lists
of provider and provisioner names that have been gathered by the caller
using these new helpers.
2018-06-22 02:39:27 +02:00
|
|
|
|
2020-09-21 22:32:50 +02:00
|
|
|
ret := make([]addrs.Provider, 0, len(reqs))
|
|
|
|
for k := range reqs {
|
various: helpers for collecting necessary provider types
Since schemas are required to interpret provider, resource, and
provisioner attributes in configs, states, and plans, these helpers intend
to make it easier to gather up the the necessary provider types in order
to preload all of the needed schemas before beginning further processing.
Config.ProviderTypes returns directly the list of provider types, since
at this level further detail is not useful: we've not yet run the
provider allocation algorithm, and so the only thing we can reliably
extract here is provider types themselves.
State.ProviderAddrs and Plan.ProviderAddrs each return a list of
absolute provider addresses, which can then be turned into a list of
provider types using the new helper providers.AddressedTypesAbs.
Since we're already using configs.Config throughout core, this also
updates the terraform.LoadSchemas helper to use Config.ProviderTypes
to find the necessary providers, rather than implementing its own
discovery logic. states.State is not yet plumbed in, so we cannot yet
use State.ProviderAddrs to deal with the state but there's a TODO comment
to remind us to update that in a later commit when we swap out
terraform.State for states.State.
A later commit will probably refactor this further so that we can easily
obtain schema for the providers needed to interpret a plan too, but that
is deferred here because further work is required to make core work with
the new plan types first. At that point, terraform.LoadSchemas may become
providers.LoadSchemas with a different interface that just accepts lists
of provider and provisioner names that have been gathered by the caller
using these new helpers.
2018-06-22 02:39:27 +02:00
|
|
|
ret = append(ret, k)
|
|
|
|
}
|
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 14:23:07 +01:00
|
|
|
sort.Slice(ret, func(i, j int) bool {
|
|
|
|
return ret[i].String() < ret[j].String()
|
|
|
|
})
|
various: helpers for collecting necessary provider types
Since schemas are required to interpret provider, resource, and
provisioner attributes in configs, states, and plans, these helpers intend
to make it easier to gather up the the necessary provider types in order
to preload all of the needed schemas before beginning further processing.
Config.ProviderTypes returns directly the list of provider types, since
at this level further detail is not useful: we've not yet run the
provider allocation algorithm, and so the only thing we can reliably
extract here is provider types themselves.
State.ProviderAddrs and Plan.ProviderAddrs each return a list of
absolute provider addresses, which can then be turned into a list of
provider types using the new helper providers.AddressedTypesAbs.
Since we're already using configs.Config throughout core, this also
updates the terraform.LoadSchemas helper to use Config.ProviderTypes
to find the necessary providers, rather than implementing its own
discovery logic. states.State is not yet plumbed in, so we cannot yet
use State.ProviderAddrs to deal with the state but there's a TODO comment
to remind us to update that in a later commit when we swap out
terraform.State for states.State.
A later commit will probably refactor this further so that we can easily
obtain schema for the providers needed to interpret a plan too, but that
is deferred here because further work is required to make core work with
the new plan types first. At that point, terraform.LoadSchemas may become
providers.LoadSchemas with a different interface that just accepts lists
of provider and provisioner names that have been gathered by the caller
using these new helpers.
2018-06-22 02:39:27 +02:00
|
|
|
return ret
|
|
|
|
}
|
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 14:23:07 +01:00
|
|
|
|
|
|
|
// ResolveAbsProviderAddr returns the AbsProviderConfig represented by the given
|
|
|
|
// ProviderConfig address, which must not be nil or this method will panic.
|
|
|
|
//
|
|
|
|
// If the given address is already an AbsProviderConfig then this method returns
|
|
|
|
// it verbatim, and will always succeed. If it's a LocalProviderConfig then
|
|
|
|
// it will consult the local-to-FQN mapping table for the given module
|
|
|
|
// to find the absolute address corresponding to the given local one.
|
|
|
|
//
|
|
|
|
// The module address to resolve local addresses in must be given in the second
|
|
|
|
// argument, and must refer to a module that exists under the receiver or
|
|
|
|
// else this method will panic.
|
2020-03-09 22:11:57 +01:00
|
|
|
func (c *Config) ResolveAbsProviderAddr(addr addrs.ProviderConfig, inModule addrs.Module) addrs.AbsProviderConfig {
|
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 14:23:07 +01:00
|
|
|
switch addr := addr.(type) {
|
|
|
|
|
|
|
|
case addrs.AbsProviderConfig:
|
|
|
|
return addr
|
|
|
|
|
|
|
|
case addrs.LocalProviderConfig:
|
|
|
|
// Find the descendent Config that contains the module that this
|
|
|
|
// local config belongs to.
|
2020-03-09 22:11:57 +01:00
|
|
|
mc := c.Descendent(inModule)
|
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 14:23:07 +01:00
|
|
|
if mc == nil {
|
|
|
|
panic(fmt.Sprintf("ResolveAbsProviderAddr with non-existent module %s", inModule.String()))
|
|
|
|
}
|
|
|
|
|
|
|
|
var provider addrs.Provider
|
2020-04-24 16:54:24 +02:00
|
|
|
if providerReq, exists := c.Module.ProviderRequirements.RequiredProviders[addr.LocalName]; exists {
|
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 14:23:07 +01:00
|
|
|
provider = providerReq.Type
|
|
|
|
} else {
|
2020-04-02 01:11:15 +02:00
|
|
|
provider = addrs.ImpliedProviderForUnqualifiedType(addr.LocalName)
|
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 14:23:07 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
return addrs.AbsProviderConfig{
|
2020-02-13 21:32:58 +01:00
|
|
|
Module: inModule,
|
|
|
|
Provider: provider,
|
|
|
|
Alias: addr.Alias,
|
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 14:23:07 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
default:
|
|
|
|
panic(fmt.Sprintf("cannot ResolveAbsProviderAddr(%v, ...)", addr))
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
2020-01-28 14:13:30 +01:00
|
|
|
// ProviderForConfigAddr returns the FQN for a given addrs.ProviderConfig, first
|
|
|
|
// by checking for the provider in module.ProviderRequirements and falling
|
2020-03-31 20:03:33 +02:00
|
|
|
// back to addrs.NewDefaultProvider if it is not found.
|
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 14:23:07 +01:00
|
|
|
func (c *Config) ProviderForConfigAddr(addr addrs.LocalProviderConfig) addrs.Provider {
|
2020-04-24 16:54:24 +02:00
|
|
|
if provider, exists := c.Module.ProviderRequirements.RequiredProviders[addr.LocalName]; exists {
|
2020-03-10 19:43:57 +01:00
|
|
|
return provider.Type
|
|
|
|
}
|
2020-03-09 22:11:57 +01:00
|
|
|
return c.ResolveAbsProviderAddr(addr, addrs.RootModule).Provider
|
2020-01-28 14:13:30 +01:00
|
|
|
}
|